Search Results

Search found 40165 results on 1607 pages for 'function pointers'.

Page 1099/1607 | < Previous Page | 1095 1096 1097 1098 1099 1100 1101 1102 1103 1104 1105 1106  | Next Page >

• Monit send alert to nagios NSCA

  - by mYzk

  I want to monitor a web with monit check host function and if the site is down then alert it to nagios nsca so it sends the info to nagios and nagios marks it as status OK or host down for example. The problem is that how can I make the monit alert fuction send the info to nagios nsca. I am not sure that this will work, but what I came up with is: set alert exec 'echo -e "nagios nsca format" | /usr/local/nagios/bin/send_nsca -H serveraddress -c /usr/local/nagios/etc/send_nsca.cfg' Would this work and is it the best solution to work with or can it be done some other way?

  Read the article

• Can I pass the LHS of a cfengine3 processes: line to the RHS?

  - by joeforker

  I'm using cfengine to start the foobar process. Apparently the LHS is discarded when I use process_select? Can I simply pass the LHS to a function, rather than having to put the command match pattern in a body argument? bundle agent foobar { processes: "foobar" # documented way would be to use .* here process_select => command("foobar"), restart_class => start_foobar; commands: start_foobar:: "/usr/bin/foobar"; } body process_select command(c) { command => "$(c)"; process_result => "command"; }

  Read the article

• Win8 ASUS R503 - My PS/2 touchpad will not allow me to update to the required 8.0.5.0 version

  - by William Cha

  Details: Brand: ASUS Manufacturer: Toro Model: R503U Attemps: Fn+F9 does not work Cannot update from the 6.--(whatever version) to 8.0.5.0. Pros: 8.0.5.0 Allows Fn+F9 to function, which allows quick touchpad disabling. Cons: Cannot update; "Your driver is up to date." I want to play and type on this notebook laptop without excessive palm strokes on the touchpad. I have that name there, showing that this is a touchpad (PS/2) I do not want nor want to use. Does anybody have a good solution to this problem?

  Read the article

• Nexenta under KVM?

  - by Nick

  I have an Ubuntu Server running KVM. I'd like to get the benefits of ZFS so I was thinking of installing a virtual machine under KVM running Nexenta (or NexentaStor), allowing that virtual machine to have raw access to a couple of physical hard disks, and then having it share its file system with NFS so that Ubuntu can access it. I've never tried setting up KVM so that the virtual machine has access to physical drives. Does this sound feasible, and is there anything I need to watch out for? Has someone already documented something like this? Does Nexenta/ZFS function basically as well in the virtual environment as if they were running base bones? I can take a small performance hit, but I don't want it to not be as reliable because of the virtualization. Thanks.

  Read the article

• Cycle through windows in KDE 4 taskbar by shortcut?

  - by Gregor Müllegger

  Is there a way to cycle through the windows in the KDE 4 taskbar with a shortcut? I want to have a switch to next window function on a mouse button. Therefore Alt+Tab is not suitable because it uses a stack for the windows. This means if hitting Alt+Tab, releasing the Alt key and pressing Alt+Tab again will bring up the window I had before pressing the keys the first time. Maybe there is a solution using DBus. But I don't know how to use this.

  Read the article

• How to prevent Spell checking code in MS Office?

  - by Aaron

  We use MS Office. Outlook for emails, Word for some documentation and I use OneNote a lot for my own note taking. What bugs me is when I drop some code or use key words or even camel case into these apps the spell checking picks them up and I have red squiggles everywhere. Ignore is pretty much useless, so either I have to turn off Spell Check altogether start adding these to the custom dictionary. What would be good is if I can use the Set Language function to mark a whole block of text to just not be spell checked. Has anyone found a nice solution to this or do you know of a blank dictionary is best to use? I found using "Mohawk" kind of does that... might just use that for now. Maybe create a macro to switch between them.

  Read the article

• Which Wine DLLs should I *not* overwrite with the real thing?

  - by endolith

  I have a legit installation of Windows XP and dual boot with Ubuntu (currently Karmic). WineHQ says it's possible to use DLLs from a real installation of Windows in place of "DLLs that Wine does not currently implement very well". So I'd like to just create softlinks that point to all of the DLLs in my real Windows System32 folder, under the theory that this would help things function better and behave in a less buggy, more native way. But should I go as far as replacing the Wine DLLs with the real ones? If so, are there any DLLs that need to remain the way they are for compatibility with the Linux world? Which ones are safe to replace?

  Read the article

• How can I get my Sapphire Radeon 7850 to output in "1080p"?

  - by Fr33dan

  I have a Radeon 7850 connected to a Vizio 3D compatible TV. The TV has a function to parse and display SBS encoded content. On my old graphics card (a Radeon 5770) I just had to select the 1080p option in the catalyst control center. In this mode my TV reported the output mode as "1080p", with the new card the TV reports "1920x1080". I cannot figure out what the difference in between the 2 signals but the "1920x1080" cannot be switched into 3D mode by the TV. Weirdly, before windows starts the (in the Bios and so forth) the computer outputs in "1080p" so I know the card is capable of it. As soon as the blue login screen comes up though it changes back to the "1920x1080". I've tried everthing I can think of. Updated my drivers from 13.3b3 to 13.4, then even tried the 13.5 beta (Which I'm still on this moment). Tried all the "optimized" HD settings in catalyst, even the 720p modes show the resolution from the TV and not the "720p" (which it used to do on the old card when I had to lower the resolution of games)

  Read the article

• Control scheduled tasks execution

  - by SJuan76

  We are a small shop. I am mainly a programmer, but due to being the only one that risks to manage our servers, the task has fallen on me (yet I it is still a secondary function so I cannot give it too much time). Over the course of years we have needed to create a decent number of .bat scripts that run as scheduled tasks in our servers (dump DB servers, SVN servers, copy files, etc.). Manually checking that everyone has proceeded ok is a time consuming task. I could get them to send an email on completion, but then I would get swarmed by lots of emails each morning. If I setup them to only e-mail on failure, I might miss the instances where the error causes the task to abort (or even not to start). Are there other alternatives? We are currently using Windows 2003 R2, but we are thinking of adding some Linux server soon, so a cross-platform solution would be best.

  Read the article

• Count all received packet using Tshark

  - by user1269592

  i am build application who start capturing via Tshark with command line and i am looking for option to count all the received packets after i am start Tshark process this is my function who start the process: int _interfaceNumber; string _pcapPath; Process tshark = new Process(); tshark.StartInfo.FileName = _tshark; tshark.StartInfo.Arguments = string.Format(" -i " + _interfaceNumber + " -V -x -s " + _packetLimitSize + " -w " + _pcapPath); tshark.StartInfo.RedirectStandardOutput = true; tshark.StartInfo.UseShellExecute = false; tshark.StartInfo.CreateNoWindow = true; tshark.StartInfo.WindowStyle = ProcessWindowStyle.Hidden; tshark.Start(); maybe someone had an idea ?

  Read the article

• Can not understand this script

  - by Jim

  Can someone help me understand this script? It is from sysconf_add and I am new to scripting. I need to do something similar. function add_word() { local word=$1 local word_quoted=$2 if ! word_present; then $debug && cp $file $tmpf sed -i -e "${lineno} { s/^[[:space:]]*\($var=\".*\)\(\".*\)/\1 $word_quoted\2/; s/=\" /=\"/ }" $file $debug && diff -u $tmpf $file else echo \"$word\" already present fi # some balancing for vim"s syntax highlighting }

  Read the article

• Malzilla Tutorial #4 - how to get it working

  - by Sim

  I am trying to understand the basic work flow of using Malzilla , and therefore doing the tutorials. But already in the first one, where you actually get to do something I am lost as it doesn't work for me at all, even though I follow it step by step. In the first paragraph where you have to concatenate the string and then translate it using the MiscDecoders->DecodeUCS2, I am getting not printable chars as a solution, after concatenating and using the decoder. In the second paragraph where you are told to run the script after adding the function-call at the bottom of the script, the Decoder tells me that he cannot handle the arguments.callee.toString() method and therefor wont run the script. How outdated are those tutorials and how can I get them to work?

  Read the article

• Can Excel show a formula and its result simultaneously?

  - by nhinkle

  I know that it's possible in Excel to toggle between displaying values and displaying formulas. I'm required to turn in assignments for a statistics class as a printed Excel sheet showing both the formula and the result. Right now the instructor makes us either copy the formula and paste it as text next to the computed value, or copy the value and paste it next to the formula. This is very inefficient, prone to error (if you change the formula or values after doing the copy-paste), and generally a waste of time. Is there any way to have Excel show the formula and its value in the same cell? If not, is there any function which will display the formula from a referenced cell as plain text, e.g. =showformula(A1) which would print out =sum(A2:A5) instead of 25 (if those were the formula and value of cell A1)? I'm using Excel 2010, but a general answer that works for any recent edition of Excel would be nice.

  Read the article

• Certain drives in RAID 5 set intermittently are not recognized

  - by hydroparadise

  I have a curious problem in that 1 (sometimes 2) drives do not get recognized in a RAID 5 set. The server is getting rather old at 5 to 6 years, but still seems to function well once the machine sees all drives. So that leaves me with three areas to consider: the motherboard, the SATA RAID card, or the individual hard drives themselves. I am leaning toward the RAID card, but have not had much dealings with RAID cards. What would cause individual drives not to be recognized in the set? If it was the card, I would think that it would be all or nothing. If it were a single drive, is it possible that it would only work sometimes? The only other thing to consider is that that they are different drives (Seagate and Western Digital) but all around 80 GB. SATA RAID controller is 3ware Escalade 8506-4LP Motherboard is a SuperMicro P4SPA+ Am open and available for more details if needed...

  Read the article

• How do I compare two Excel documents?

  - by arathorn

  The compare function in Word 2007 is very handy -- is there a similar capability in Excel 2007? I can't seem to find it... The documents I'm trying to compare are essentially two versions of the same content. Unfortunately, "Track Changes" has not been used. If file comparison not a built-in feature, what alternatives are out there for doing this? UPDATE [2009-08-05]: I ran across this (somewhat dated) overview of some of the third-party options that are available: http://www.comparesuite.com/solutions/compare_utilities_review/compare-files-excel.htm UPDATE [2009-08-12]: I ended up going with the Beyond Compare answer, but several of the other answers below were adequate as well, and might be more useful for someone else. (E.g., if you don't own a license for BeyondCompare, or want a comparison GUI that's integrated into Excel.) See also: How do I diff two spreadsheets on Stack Overflow

  Read the article

• Sound card problem, no audio device detected

  - by Paul

  I bought a new sound card because my built in sound card did not function. When I open YouTube, Media Player or anything that can create a sound my computer will hang up and sometimes when I start my computer it will hang when the Windows XP sound will activate. Update: My computer has no audio. It says NO AUDIO DEVICE. I already installed Realtek AC97 and Realtek High Definition Audio Driver and I also pasted stream.dll to the Windows and system32 folders and I restarted my computer but it still says NO AUDIO DEVICE. Please help me. Thanks

  Read the article

• Plesk 9.2.1 reporting much more SMTP traffic than the logs indicate

  - by Eric3

  Plesk is reporting nearly 7GB of SMTP traffic so far this month on one domain, most of it outgoing. However, after running qmail's mail logs (which only go back to May 8) through Sawmill, only about 900MB of traffic on that domain is accounted for. What I know so far: Email sent via PHP's mail() function is sent through sendmail, which has been logging its output via syslog to the same logs that qmail uses, at /usr/local/psa/var/log/ Messages sent by logging in directly via Telnet are logged as well I verified that Plesk is reporting totals correctly by creating a new domain, sending some large emails through it, running Plesk's statistics calculation script, and comparing its reported totals to the actual size of the emails sent The problem domain did have three mail accounts with blank or insecure passwords, which I corrected Does anyone know how Plesk calculates SMTP traffic statistics? Are there some log files elsewhere that I'm missing? What kind of SMTP traffic would Plesk know about that isn't being logged?

  Read the article

• What are current options to scan or convert a hand written note to a file on my laptop?

  - by goldenmean

  I wonder how come there are not many options when it comes to scan or convert a device which could be connected to a laptop/desktop, which could - 1] Allow me to write with a digital pen on some special surface, which is connected to my laptop and thus converts my hand written notes to a pdf/jpg/word. (Microsoft's failed attempt at windows based tablet PC in past comes to mind, but not anymore) Any such solution I can use with my laptop? 2] A document scanning device, apart from a flat bed scanner, integrated these days into multi function printers; anything that is portable enough to connect to my laptop?

  Read the article

• VIM is great for text. Is there, too, an efficient, mouseless way to manipulate files on OS X?

  - by Dokkat

  I am having trouble navigating through files on OS X. That is, creating files, copying, moving, and so on. I am currently using the Finder, but the act of clicking with the mouse is not very efficient. Acessing a deep folder takes a considerable amount of time and you'll have to know it's entire path. When I try to use the command line it is even worse. Going to a folder requires at least typing it's entire path with the 'cd' command; and, when you are there, you don't have full control over it. For example, how would you move 3 specific files to another folder? Some text editors offer a 'fuzzy search' function that allows a very fast form of jumping through files. What is a fast, efficient way to navigate through files on OS X?

  Read the article

• How do I usb tether my Cyanogen modded G1's internet connection to my Toshiba Tecra 8000 running Xubuntu?

  - by atticus

  I have usb-tethering enabled in my phone. It works fine with Vista. When I plug my phone into my Tecra 8000 laptop running Xubuntu, dmesg shows: "usb 1-1: new full speed USB device using uhci_hcd and address 8". I see that the OS has detected it as a storage device, but I can't get it to function correctly as a network device. /dev/us* shows no usb0, but it does show /dev/usbdev1.1_ep00 /dev/usbdev1.1_ep81 /dev/usbdev1.8_ep00 ... usbdev1.8_ep83 I could just use the wireless tether app for android, but I can't get my Netgear wg511 v2 (made in China) wireless card to work in this laptop either. But that's another post for later.

  Read the article

• Tool that automatically keeps old versions of a file? Shadow Copy in Win7?

  - by Michael Stum

  When I'm working with a Graphics App, I press CTRL+S a lot to Quicksave. Sometimes, I just went too far and made a bad decision, sometimes to the point Undo wouldn't help either. I would love to retain old versions of a file. Normally, Source Control would be of use here, but that's a manual process (same as just making some copies). I wonder if there is an automatic way to do that? Everytime the file changes, keep a backup. I believe that in Windows Server, Shadow Copies can do that. When I check in my Windows 7 (Ultimate), I do see "Previous Versions" as a tab, but that seems to be part of the backup function which is once again manual. Is there a way to get that type of automatic versioning?

  Read the article

• Cinema4D for game development tutorials anyone ?

  - by George Profenza

  Hi, I started to learn Cinema 4D. I've noticed it's really easy to use for motion graphics, but I want to use it for modeling for games/realtime 3d engines. Before I used 3dsmax and it was easy to estimate how a model would look/behave in a 3d engine. The two main things I did was displaying Polygon triangles and displaying the Polygon Count. I've found the Total Polygons tick in HUD settings in Cinema 4D, but I can't find any display mode that will show triangles. Is there there a way to display triangle faces/not quads in Cinema4D ? If so how ? There is a Triangulate function, but I'd rather not Triangulate/Untriangulate all the time, especially since it's converting back and forth between the two doesn't always produce the same result.

  Read the article

• How to connect two subnet with Windows Server?

  - by 9dan

  Hello, I have some work to do in a small office. This office has two separate Internet connections. One is a kind of DSL line and connected through the Internet sharing router (DHCP). One is a leased line with public IP adresses (No DHCP). This leased line provide only 30 IP addresses and the gateway is provided by the ISP. Some workers use private IP provided by the router, some workers use manually setup public IP. There is a Windows 2008 R2 server with two NICs, connected to each lines. I want to connect/merge(?)/bridge(?) two subnet with this server so that users from the different subnet can access each other. How can I accomplish this? Something like, add gateway function to this server and public IP users change the gateway to point this server.. It it possible ? Sorry for my rambling. Thanks in advance.

  Read the article

• Managing service passwords with Puppet

  - by Jeff Ferland

  I'm setting up my Bacula configuration in Puppet. One thing I want to do is ensure that each password field is different. My current thought is to hash the hostname with a secret value that would ensure each file daemon has a unique password and that password can be written to both the director configuration and the file server. I definitely don't want to use one universal password as that would permit anybody who might compromise one machine to get access to any machine through Bacula. Is there another way to do this other than using a hash function to generate the passwords? Clarification: This is NOT about user accounts for services. This is about the authentication tokens (to use another term) in the client / server files. Example snippet: Director { # define myself Name = <%= hostname $>-dir QueryFile = "/etc/bacula/scripts/query.sql" WorkingDirectory = "/var/lib/bacula" PidDirectory = "/var/run/bacula" Maximum Concurrent Jobs = 3 Password = "<%= somePasswordFunction =>" # Console password Messages = Daemon }

  Read the article

• Ubuntu based VPN server behind NAT router?

  - by maartenn88

  I have a small intranet- and file-server inside our company, which can only be reached from inside our own network. I'd like to be able to reach the intranet and files on the server from outside the network, however I don't really like the idea of completely opening security by forwarding the ports on our NAT-router, so I'd prefer to enable a VPN possibility for this. So I have a router, which is the DHCP server and has NAT function, and I have an Ubuntu Server with the files and intranet on it. How do I configure these two so that I can make a VPN connection with my network in order to reach the server? thanks in advance for any answer!

  Read the article

< Previous Page | 1095 1096 1097 1098 1099 1100 1101 1102 1103 1104 1105 1106  | Next Page >