Search Results

Search found 3695 results on 148 pages for 'failure'.

Page 11/148 | < Previous Page | 7 8 9 10 11 12 13 14 15 16 17 18  | Next Page >

• Live-Ubuntu 12.04 ran fine, now stopped booting!

  - by user89743

  I've seen similar problems to this several times in the forum, but mine is a bit different, so the other posts I saw were no help to me. When I boot Ubuntu 12.04 64-bit from live-SD-card (3GB persistence) I suddenly get this error: (initramfs) mount: mounting /dev/loop0 on //filesystem.squashfs failed: Invalid argument Can not mount /dev/loop/0 (/cdrom/casper/filesystem.squashfs) on //filesystem.squashfs (it says I can type "help" for commands, but I don't know anything about how to go from there, totally new to linux) The reason I say my case is different is because my Ubuntu worked fine for over a week, even pretty fast, and now this problem happened. Before that I used to run my live ubuntu from USB sticks but that was slower (especially when booting which took 15 minutes from USB stick!). Also I kept getting the same above problem after a while when booting and had to re-create a live USB linux several times. Installing on harddrive is not an option because my harddrive has physical damage and getting a replacement will take a while, therefore I can only use live-USB or live-SD-card Ubuntu. As I said I used Ubuntu without problems for more than a week, before that as well for several weeks on USB sticks, but the above problem occured sooner or later. This time I paid attention to when it happened: I was rebooting my computer (HP 620 laptop, 4 GB RAM, 64 bit system) from SD flash card and when I was booting I selected F6 and then the first option "no acpi" or something like that...I had used it before and noticed it slowed down the time it took Linux to use. This time it caused this error. Now even when I boot normally/default I get this error. Now I'm accessing Ubuntu from my USB stick without persistence file, when I check my SD card, all the files mentioned in the error message are there and the filesystem.squashfs is 691.2 MB so nothing seems to have been deleted by accident. (I have already made many changes/downloaded programs to my SD card persistent Ubuntu and would hope to loose them, since downloading is expensive for me, and since the problem seems to re-occur...) Can anyone help me, preferably without having to create another startup disk on my SD card? I'm totally new to this. Sorry for the long posts, just didn't know what info is relevant and what isnt! Kon

  Read the article

• Unable to install ia32-libs package

  - by Ron Thomas

  I need to manually install the drivers for my graphics card, which is an ATI 2600 xt. But I am using a 64-bit platform and to do so i need the ia32-libs package. i have scoured the net for fixes, workarounds etc. but have found none that work. the output i get after trying apt-get is: Reading package lists... Done Building dependency tree Reading state information... Done Package ia32-libs is not available, but is referred to by another package. This may mean that the package is missing, has been obsoleted, or is only available from another source E: Package 'ia32-libs' has no installation candidate I am running linux mint 12

  Read the article

• Windows Defender Update KB915597 (Definition 1.135.415.0)? Killed My Live Discs

  - by user88311

  Here's my problem, for those willing to read for about 2 minutes here's the entire story, http://answers.microsoft.com/en-us/windows/forum/windows_vista-windows_update/bsod-after-windows-defender-update-kb915597/a4b5fca3-0274-47b4-97c4-61b34c4c4599, for those who want the short version here's what happened. After windows update automatically updated windows defender to kb915597, my computer starting getting bsods on shut down and start up and started experiencing problems withe the usb ports. So I decided to go to the microsoft answers site for help, I know that was probably my first mistake, so I followed their advice and they turned my computer into a large paper weight. Luckily I make physical backups of my c drive every few months and I have one from back in july, so I figured I'd boot up a ubuntu live disc, copy all my files from the past 2 months to a external drive and just copy the backup back to the c drive, that's where I ran into this problem. When I put in either a ubuntu or kubuntu disc, everything goes well, until it finishes the loading bar then when the OS would presumably start up, the computer resets, I've tried with ubuntu, kubuntu and gparted, and only gparted is able to get to the point where it starts up, but even then when I try to access the internet from it, the computer resets, and when I tried to copy the entire C drive partition to a blank external I wasn't able to. So I figured somehow maybe the C drive had something to do with it, so I unplugged the C drive so my computer was just a 2.8 ghz processor and 2 gigs of ram, should have had no problem starting a live disc but the problem still continues. After doing some googling around I've found whenever windows gets a update with the title KB915597 it's pretty much the kill switch for windows, I've tried contacting microsoft tech support and even managed to directly contact a software engineer but as soon as I mention KB915597 they all just blew me off. I hope anybody who reads this has any idea how to fix this, I'm going to attempt to install ubuntu or kubuntu to a external drive using the same computer and see what happens now.

  Read the article

• Ubuntu multiple issues (blank screen)

  - by Donavon

  Computer Specs I am having difficulties, to get Ubuntu 11.10 to work. For the 11.10 version, if I click install, or if I click try Ubuntu, I only get a blank screen, that just stays there. If I use "nomodeset", it changes to a loading screen and after about 2 minutes it goes back to black screen - however, before it goes black, i get a few errors, like: bad target number, or passwd error mode (something like that). I've also tried (xforcevesa, i915.modeset=0, nomodeset, radeon.modeset=0, i915.modeset=1) I have also tried the alternate installation, which installed fine, however when I boot up, select it from "grub", it goes black. I did manage to install 10.04, however the screen resolution was 800x600 and I couldn't fix it to 16:9 (my resolution). I don't wanna use 10.04, because I would like the new one 11.10, and would like to use it. Any help would be GREATLY appreciated. Thank you

  Read the article

• Dell M4600 with nVidia Quadro 2000M hangs on boot when external monitor is connected

  - by vladeta

  I have a problem with my fresh installed Ubuntu 12.04 LTS on my Dell M4600: nVidia quadro 2000M i7-2860 16GB ram 128GB SSD Dell/Samsung 750GB HDD IPS RGB laptop display When it is connected via DP++ to the external Dell U2311H monitor, it hangs on boot or when wakening from suspend. If I detach the DP cable it boots normally. I have tried all combinations that I have found, as adding to grub: "no splash", "boot=pci", "acpi=off", etc... I have also changed in nVidia X settings that external monitor is the primary one and also tried to delete monitor.xml file. There is no change it hangs each time after grub. It starts to load daemons then both screens are blank and then completely hangs with beep sound. What I discovered is if I detach the cable and wait for about 2 sec after grub starts booting and then physically connect DP cable while the Ubuntu is still booting everything works normally and I have a picture on my external screen while the laptop screen is off, just as I wanted. Do you maybe know how to solve this issue? Thank You.

  Read the article

• Ubuntu 12.10 hangs on checking battery state

  - by Waxolunist

  I have a Thinkpad X230. After a boot it hangs with checking battery state [OK]. A second boot is most times successful. What I have seen in other posts doesn't fit to my problem, because My graphics card is Intel 3rd Gen Core processor Graphics controller (not nvidia) It happens not always I have a fresh installed 12.10 with the latest updates (no upgrade) Does anyone experience the same issues or has a solution?

  Read the article

• Unable to start GRUB2 on Triple boot Macbook Pro with OS X Lion, Windows 7 and Ubuntu

  - by Shravan

  I installed Windows 7 using Bootcamp. Then I created a partition from the empty space in the Windows partition and another 4GB partition for the linux swap using GParted. I installed Ubuntu 12.04 LTS in the the newly created partition from the Windows partition. Now GRUB2 does not load and I can only see the blinking cursor on the top right when selecting "Windows HD" from the 'option' key at the start up. OS X works fine but nothing else. Could someone please help me fix this? I am attaching the boot-info from the boot-repair tool. http://paste.ubuntu.com/1040169/

  Read the article

• Newly compiled (patched with -ck) 3.3 kernel won't boot up

  - by Shiki

  Screen is garbled. Reaaaally garbled. Like some sort of scrambling image from a movie. I can upload some pictures if needed. To be short with the description. Here is my 3.3 + ck .config file: http://pastebin.com/aP2F9RcH The dmesg log of the failed kernel: http://pastebin.com/esc2Rtka The computer is a ThinkPad T500 laptop. I have selected everything needed for the computer (as far as I can tell, but check the .config). The normal generic Ubuntu kernel boots and works perfect!

  Read the article

• Grub2 attempting to boot hd1 when it should boot hd0

  - by JoBu1324

  I'm attempting to perform a "normal" install on a USB3 SSD (I don't know if it is noteworthy, but I don't have a swap partition). The installation proceeds normally (I'm installing from a USB2 device I created using LiLi Boot, with a copy of Ubuntu 12.10 64bit that I downloaded directly from the source. The system I'm running Ubuntu on has had a more traditional installation of ubuntu running on it without issue (also 12.10), so I know that everything works A-OK when booting from a 7200RPM internal disk. There are a number of oddities that I've noticed so far, including graphics corruption, but the first and most pressing issue is that Grub2 refuses to recognize the correct hd. From /boot/grub/grub.cfg: if [ x$feature_default_font_path = xy ] ; then font=unicode else insmod part_msdos insmod ext2 set root='hd1,msdos1' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1 b58ee4f7-d41d-400a-b7b8-18bd1f0ae9d3 else search --no-floppy --fs-uuid --set=root b58ee4f7-d41d-400a-b7b8-18bd1f0ae9d3 fi font="/usr/share/grub/unicode.pf2" fi This is from a 100% fresh install of linux (first boot), which was installed while no hard drives were connected to the system, other than the USB2 LiLi drive. The system refuses to boot unless I change the hd1,msdos1 - hd0,msdos1 in the grub menu at boot, when it is the only disk device connected to the PC. What options are left for me to troubleshoot this issue? I've been racking my brains and taxing the internet trying to dig up something on this problem, but now I'd like to see if the Ubuntu community can rise to the challenge and help me fix this boot problem. This is the second time I've attempted this particular setup. The first time, after days of wasted time, I managed to get it to boot every other boot - i.e. every even boot it would boot into Ubuntu like it was happy; every odd boot it would boot into the BusyBox or Grub prompt. At one point it complained that it couldn't find /dev/disk/by-uuid/[the disk], which I found most perplexing, since the disk was there and booted before and after the occurrence (with intervention).

  Read the article

• Can't n run a bootable cd of ubuntu desktop on a laptop with no OS

  - by csbl

  I recorded a bootable CD with the image that I downloaded from the Ubuntu site, using NTI CD MAKER. My laptop had a problem and I prefered to get it fixed without installing an OS. Now, when I try to run this CD it shows the following error mssage: Device driver not found: 'MSCD001'. No valid CDROM device drivers were selected Mouse driver was previously installed A:\> If the drive wasn't working the CD wouldn't even start, I assume....So can anyone help me please! Thank you!

  Read the article

• Boot process enter an infinite loop after installing Ubuntu 11.04 together with Windos 7 and XP

  - by Andreafc

  I have a new computer ACER Aspire X3960 which came with Widows 7 preinstalled. I made a new partition where I installed Windows XP and then I installed in new logical partitions (a Swap, a / and a /home partition) Ubuntu 11.04. At the end of the process, the computer enters the very first screen where it says "press DEL to enter BIOS setup, press F12 to enter BOOT options". After a few seconds, the screen goes blank, the computer beeps and then it presents the same screen again. It doesn't even ever go to the grub options of which operating system I want to start. It just loops there forever. I tried to fix the (eventually damaged) grub following these instructions (unfortunately in german) http://wiki.ubuntuusers.de/GRUB_2/Reparatur from a LiveUSB, which I'm also using to post this question. Now I found here that someone asked for the results of the Boot Info Script. Here are mine (I hope I did right in trying to upload the file): http://paste.ubuntu.com/736032/ Can anybody help? Thank you very much. Andreafc

  Read the article

• error: no device connected

  - by Prabath Swarna

  I did a fresh install of 12.04 and it went fine, worked on it for several days, but one day the browser crashed and i reset the machine, after that I get this error when i boot; error: no device connected error: no device connected error: no device connected error: no device connected This comes after the BIOS confirmation, and it stays for about 30 seconds, then the grub menu comes and when I selected the default the screen becomes purple and stays like that for a whole Minuit. I thought maybe that is because I have 500GB HDD so i ran the boot-repair, It did nothing at all. I'm sure I did the boot-repair thing right, sorry I forgot the paste URL. If i reinstalled will this error persist.

  Read the article

• ACPI=OFF in Ubuntu 11.10

  - by Mark

  When I tried to upgrade from 11.04 to 11.10 the system froze, so I've been playing around with a couple other linux builds (Fedora, Mint, and Puppy) the last couple days and I keep coming around to the same problem: a lockup during boot; each build referencing a kernel error. On another board someone suggested booting with a boot up line of "ACPI = off". It works with other OS', but I'm not sure where to put this command. Can anyone 'enlighten' me, please?

  Read the article

• How to get past black screen with mouse icon while installing on Gateway MX6920?

  - by tom kruse

  I have an old Gateway MX6920 laptop that got a virus on its hard drive so I put in a new one from another laptop. When i turn it on it tries to load Windows but fails so I'm going to try to put Ubuntu on it (because I heard it's a good OS). I downloaded the 32-bit desktop version of Ubuntu and burned it to a CD. I put the CD in the computer, went to the boot menu, and selected CD-ROM. The computer tries to boot but stops at a black screen with a mouse icon sitting in the middle of the display. I have no idea what's going on, so please help.

  Read the article

• livecd won't boot 11.04

  - by user20006

  I bought a brand new computer yesterday (Toshiba Satellite Pro L770-10T : Intel Core i5 2410M, 2,3 GHz, 4096 Mo RAM, nVidia GeForce GT 525M) that simply won't boot any livecd I tried. I am using debian/ubuntu for a long time but this is the first time I can't boot a livecd Here is what I tried without success: Ubuntu 11.04 i386 and x64 both desktop and alternate Debian stable livecd old working ubuntu livecds including 8.x 9.x 10.x On ubuntu-10.04.2-desktop-i386.iso I had a kernel panic On 11.04 packages were corrupted although md5 and sha1 were correct I must add that those were burned on different cds CD-R or CD-RW. Any help would be greatly appreciated! Thanks in advance

  Read the article

• Can't start ubuntu 11.10, Stops at login screen!

  - by Martinpizza

  I have been trying to dual boot ubuntu with windows 7 via WUBI on my custom built pc but without success. When i start the computer i can choose windows or ubuntu i choose ubuntu and when i should get to the login screen the screen just stays purple/pink. Tried safe mode but cant get in there either. I have tried reinstall but did not work either. :( The second time i install ubuntu the screen was purple/pink and the screen was cut of so the left side was on the right side and right side on left side (hard to describe) Third time installing (The last time) it is just like the first time please help!!!! cant get nowhere without help i am kinda new at ubuntu and its creepy commands. Had ubuntu on my old computer. I think the problem is my hardware so here is my computer specs: Amd Fx 6100 Amd HIS Radeon HD 6950 ICEQ X Asus Sabertooth 990fx 1TB Harddrive I have no idea the name on it Please Help me!! Sorry for my bad English! :D

  Read the article

• 12.04 usb install "boot error"

  - by kindahero

  I downloaded 12.04 64bit, I checked with md5. Seems okay. made bootable usb with usb creater. Now if try to boot up from live usb. I just get "boot error". Nothing else. nothing else. googled around. nothing comes out. UPDATE: some additional info. The usb manufacture is sony. it is fat32 partitioned. Most importantly I could install 12.04 on other systems by same usb. Yes, I definitely setup my Bios boot order to look for USB disk first.

  Read the article

• ubuntu 12.04 LTS hangs on boot when external monitor is connected

  - by vladeta

  I have a problem with my fresh installed Ubuntu 12.04 LTS on my Dell M4600: nVidia quadro 2000M i7-2860 16GB ram 128GB SSD Dell/Samsung 750GB HDD IPS RGB laptop display When it is connected via DP++ to the external Dell U2311H monitor, it hangs on boot or when wakening from suspend. If I detach the DP cable it boots normally. I have tried all combinations that I have found, as adding to grub: "no splash", "boot=pci", "acpi=off", etc... I have also changed in nVidia X settings that external monitor is the primary one and also tried to delete monitor.xml file. There is no change it hangs each time after grub. It starts to load daemons then both screens are blank and then completely hangs with beep sound. What I discovered is if I detach the cable and wait for about 2 sec after grub starts booting and then physically connect DP cable while the Ubuntu is still booting everything works normally and I have a picture on my external screen while the laptop screen is off, just as I wanted. Do you maybe know how to solve this issue? Thank You.

  Read the article

• Machine check error while booting from USB

  - by javanna

  I put the last Ubuntu iso on my USB stick using UNetBootin, after formatting it to fat32. I've already done that before with other operating systems and it worked. I can't actually boot Ubuntu from USB since I get a black screen with the error "Machine check error" on top the an automatic reboot happens. The error appears right after the boot, I can't see anything else before. I'm using my ASUS K53SV latop. Does anybody know how to solve this?

  Read the article

• Server asks for username and password on boot

  - by Jon

  I installed the Ubuntu server 12.04 easily, however, when I boot it asks for a username and password. I don't know my previous username or password from Windows XP. I am currently trying to install any version of Ubuntu I have in my arsenal to recover the PC, but all intents so far have failed. They worked on other computers but not on this one, the error I get is No DEFAULT or UI configuration directive found! I have tried all the solutions found on this site but to no avail. I don't have a Windows Ultimate boot disk and I'm out of CDs to burn. I can, however, make live USBs. Any Suggestions?

  Read the article

• Fail to boot after installation onto ASUS PC 1015PX

  - by strugglingbadly

  My new ASUS 1015PX has the usual Windows on the SDA1 partition - 100Gb, followed by SDA2 - 15Gb - as the recovery partition for Windows, and SDA3 with 183Gb for drive D:\ for windows. ASUS uses SDA4 - 19Mb for it's own use. 11.10 on an USB will load Ubuntu on a try basis and it seems OK, but every time I attempt an install, Ubuntu quickly shuts down and the restart process begins. This repeats endlessly. I've tried 10.04 Netbook Remix but that will not boot at all with the machine reporting - unknown keyword in config file gfxboot vesamenu.c32: not a COM32R image. I've gone through the above about 6 times each with the same results. I have also tried the above with the partitioning unchanged, and using gparted, with SDA3 formatted to ext4, windows D:\ reduced to 8Gb providing a 175Gb unallocated space - all to no avail. Further information: During my attempt to load 11.10, I notice that on the page which offers 3 options of loading, the first in the list includes the statement 'install INSIDE windows...' whereas the on line help shows 'install ALONGSIDE windows...'. (my caps for emphasis) I have double checked that I am using the correct download - not the install within windows option.

  Read the article

• Installing Ubuntu on Asus A43SM

  - by Subangkit

  i've Asus Laptop A43SM the specifications can be seen here. I am trying to install Ubuntu 12.04 LTS on my laptop, but something wrong is happening. When I boot up Ubuntu on this laptop the first screen Ubuntu loader shows up, but then it freezes; I can't do anything but push the power button. I've tried to use a usb drive and a CD but that doesn't help. Anyone can tell me how to install Ubuntu ?

  Read the article

• Cannot boot after installing ubuntu on lenovo x120e

  - by tutysara

  I have installed ubuntu 11.10 on my x120e using amd64 alternate iso image. The installation went fine, but it is having issues while booting after a successful installation, it says - "No Operating System Found". I followed the instruction at - help.ubuntu.com/community/X120e#Installation to purge grub-efi and installed grub-pc, even then I couldn't boot into ubuntu.(got the same "No Operating System Found") This is the file from boot-repair with this setup - http://pastebin.ubuntu.com/926556/ Then I asked in #ubuntu and they suggested me to create a bios-boot partition, I was not very comfortable with the solution they had suggested but gave it a try anyhow. I re-sized my initial partition and made 4 MB free space in the beginning of the partition and had set the flag bios_grub. Re-installed ubuntu 11.10 this time using amd64 desktop iso image file. Installation went fine as before but finally this time also the system didn't boot, it gave the same - "No Operating System Found" message. In BIOS I have the settings as to use both (Legacy and UEFI) and with UEFI tried first. This is the boot-repair file from my latest setup - http://pastebin.ubuntu.com/926761 Any help/suggestions are appreciated.

  Read the article

• Upgrade to Precise leaving system unbootable

  - by Talemon

  I've upgraded our server's system from Lucid to Precise and as far as I can tell, it left the system in an un-bootable state. I've read many responses in different threads but my problem has a twist. When we boot the server, it says The disc drive for / is not ready yet or not present Continue to wait; or press S to skip mounting or M for manual recovery but when I press any of those buttons, it doesn't do anything. I can't boot to any recovery console, and as it is a server and I'm accessing it via iDRAC, there's not much I can do.

  Read the article

• Ubuntu dual boot OS crashed my computer. Now my computer won't boot. Please Help

  - by uBuntu noob

  I've just tried to install ubuntu 12.04 dual boot OS with Windows 7 and it finished installing in ubuntu. However, it said that the bootloader "grub.." failed to install. The same exact problem here I receive the error 'grub-install /dev/sda failed' while attempting to install Ubuntu as the computer's only OS. . When I tried to restart my computer, it went to the hp screen since my computer is a dv6 hp laptop and then it goes into this black screen with no words or any buttons will work. There is just a blinking underscore that seems like it'll allow me to type but makes error sounds when I type. Is this because I possibly partitioned my memory incorrectly? Any help would be greatly appreciated. I'm very desperate. ANY HELP would be great. Thanks.

  Read the article

< Previous Page | 7 8 9 10 11 12 13 14 15 16 17 18  | Next Page >