Search Results

Search found 307 results on 13 pages for 'nate gates'.

Page 11/13 | < Previous Page | 7 8 9 10 11 12 13  | Next Page >

• Creating static NAT blocks outbound traffic Cisco ASA

  - by natediggs

  Hi Everyone, I have two web servers sitting behind a Cisco ASA 5505, which I don't have much experience with. I'm trying to create two static NATs. One static NAT that goes to xx.xx.xx.150 and another that goes to xx.xx.xx.151. I've created the static NAT for the .150 web server and it works FINE. Incoming and outgoing traffic work great. This is the staging web server. I now need to duplicate the setup for the production web server. So, I connect the webserver to the firewall, change the public IP address on one of the NICs reboot the server and I have outbound internet access. Then I run the command: static (inside,outside) xx.xx.xx.150 192.168.1.x which is successful. I then run the command: access-list acl-outside permit tcp any host xx.xx.xx.150 eq 80 Which is successful. I then try to browse the internet and I get nothing. I try to telnet in through port 80 and I get nothing (though I'm guessing because the response to the telnet request is being blocked). I've tried this with the production web server and then I tried it with another web server that is for internal testing and have the exact same problem. Both work fine until I run the static NAT rule and then no outbound internet access. I have a feeling that it's something simple that I'm missing, but my limited experience with this device is killing me. Below I've pasted the current configuration. I'm currently trying to get this to work on the .153 server which is the internal testing server. Once I can verify that works, I'll try it with production. : Saved : ASA Version 8.2(4) ! hostname QG domain-name XX.com enable password passwd names ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 ! interface Ethernet0/2 ! interface Ethernet0/3 ! interface Ethernet0/4 ! interface Ethernet0/5 ! interface Ethernet0/6 ! interface Ethernet0/7 ! interface Vlan1 nameif inside security-level 100 ip address 192.168.1.1 255.255.255.0 ! interface Vlan2 nameif outside security-level 0 ip address XX.XX.XX.148 255.255.255.0 ! interface Vlan3 shutdown no forward interface Vlan1 nameif dmz security-level 50 ip address dhcp ! boot system disk0:/asa824.bin ftp mode passive clock timezone EST -5 clock summer-time EDT recurring dns server-group DefaultDNS domain-name fw.XXgroup.com same-security-traffic permit inter-interface access-list acl-outside extended permit tcp any host XX.XX.XX.150 eq www access-list acl-outside extended permit tcp any host XX.XX.XX.150 eq https access-list acl-outside extended permit tcp any host XX.XX.XX.151 eq www access-list acl-outside extended permit tcp any host XX.XX.XX.151 eq https access-list acl-outside extended permit tcp any host XX.XX.XX.153 eq www access-list inside_access_in extended permit ip 192.168.1.0 255.255.255.0 any access-list inside_nat0_outbound extended permit ip any 192.168.1.32 255.255.255.240 pager lines 24 logging enable logging asdm informational mtu inside 1500 mtu outside 1500 mtu dmz 1500 ip local pool VPNIPs 192.168.1.35-192.168.1.44 mask 255.255.255.0 icmp unreachable rate-limit 1 burst-size 1 asdm image disk0:/asdm-635.bin no asdm history enable arp timeout 14400 global (outside) 1 interface nat (inside) 0 access-list inside_nat0_outbound nat (inside) 1 0.0.0.0 0.0.0.0 static (inside,outside) XX.XX.XX150 192.168.1.100 netmask 255.255.255.255 static (inside,outside) XX.XX.XX153 192.168.1.102 netmask 255.255.255.255 access-group acl-outside in interface outside route outside 0.0.0.0 0.0.0.0 XX.XX.XX129 1 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 dynamic-access-policy-record DfltAccessPolicy aaa authorization command LOCAL http server enable http 192.168.1.0 255.255.255.0 inside http 0.0.0.0 0.0.0.0 outside no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac crypto ipsec security-association lifetime seconds 28800 crypto ipsec security-association lifetime kilobytes 4608000 crypto dynamic-map outside_dyn_map 20 set pfs group1 crypto dynamic-map outside_dyn_map 20 set transform-set ESP-3DES-SHA crypto map outside_map 65535 ipsec-isakmp dynamic outside_dyn_map crypto map outside_map interface outside crypto isakmp enable outside crypto isakmp policy 10 authentication crack encryption 3des hash sha group 2 lifetime 86400 no crypto isakmp nat-traversal client-update enable telnet timeout 5 ssh timeout 5 console timeout 0 dhcpd auto_config outside ! dhcpd address 192.168.1.2-192.168.1.33 inside dhcpd dns 208.77.88.4 interface inside dhcpd enable inside ! threat-detection basic-threat threat-detection statistics access-list no threat-detection statistics tcp-intercept webvpn enable outside svc image disk0:/sslclient-win-1.1.0.154.pkg 1 svc image disk0:/anyconnect-win-2.5.2019-k9.pkg 2 svc enable group-policy ATSAdmin internal group-policy ATSAdmin attributes dns-server value 208.77.88.4 208.85.174.9 vpn-tunnel-protocol IPSec svc webvpn webvpn url-list none svc keep-installer installed svc rekey method ssl svc ask enable username qgadmin password /oHfeGQ/R.bd3KPR encrypted privilege 15 username benl password 0HNIGQNI0uruJvhW encrypted privilege 0 username benl attributes vpn-group-policy ATSAdmin username kuzma password rH7MM7laoynyvf9U encrypted privilege 0 username kuzma attributes vpn-group-policy ATSAdmin username nate password BXHOURyT37e4O5mt encrypted privilege 0 username nate attributes vpn-group-policy ATSAdmin tunnel-group ATSAdmin type remote-access tunnel-group ATSAdmin general-attributes address-pool VPNIPs default-group-policy ATSAdmin tunnel-group SSLVPN type remote-access tunnel-group SSLVPN general-attributes address-pool VPNIPs default-group-policy ATSAdmin ! class-map inspection_default match default-inspection-traffic ! ! policy-map type inspect dns preset_dns_map parameters message-length maximum 512 policy-map global_policy class inspection_default inspect dns preset_dns_map inspect ftp inspect h323 h225 inspect h323 ras inspect rsh inspect rtsp inspect esmtp inspect sqlnet inspect skinny inspect sunrpc inspect xdmcp inspect sip inspect netbios inspect tftp inspect ip-options ! service-policy global_policy global privilege cmd level 3 mode exec command perfmon privilege cmd level 3 mode exec command ping privilege cmd level 3 mode exec command who privilege cmd level 3 mode exec command logging privilege cmd level 3 mode exec command failover privilege show level 5 mode exec command running-config privilege show level 3 mode exec command reload privilege show level 3 mode exec command mode privilege show level 3 mode exec command firewall privilege show level 3 mode exec command interface privilege show level 3 mode exec command clock privilege show level 3 mode exec command dns-hosts privilege show level 3 mode exec command access-list privilege show level 3 mode exec command logging privilege show level 3 mode exec command ip privilege show level 3 mode exec command failover privilege show level 3 mode exec command asdm privilege show level 3 mode exec command arp privilege show level 3 mode exec command route privilege show level 3 mode exec command ospf privilege show level 3 mode exec command aaa-server privilege show level 3 mode exec command aaa privilege show level 3 mode exec command crypto privilege show level 3 mode exec command vpn-sessiondb privilege show level 3 mode exec command ssh privilege show level 3 mode exec command dhcpd privilege show level 3 mode exec command vpn privilege show level 3 mode exec command blocks privilege show level 3 mode exec command uauth privilege show level 3 mode configure command interface privilege show level 3 mode configure command clock privilege show level 3 mode configure command access-list privilege show level 3 mode configure command logging privilege show level 3 mode configure command ip privilege show level 3 mode configure command failover privilege show level 5 mode configure command asdm privilege show level 3 mode configure command arp privilege show level 3 mode configure command route privilege show level 3 mode configure command aaa-server privilege show level 3 mode configure command aaa privilege show level 3 mode configure command crypto privilege show level 3 mode configure command ssh privilege show level 3 mode configure command dhcpd privilege show level 5 mode configure command privilege privilege clear level 3 mode exec command dns-hosts privilege clear level 3 mode exec command logging privilege clear level 3 mode exec command arp privilege clear level 3 mode exec command aaa-server privilege clear level 3 mode exec command crypto privilege cmd level 3 mode configure command failover privilege clear level 3 mode configure command logging privilege clear level 3 mode configure command arp privilege clear level 3 mode configure command crypto privilege clear level 3 mode configure command aaa-server prompt hostname context call-home profile CiscoTAC-1 no active destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address email [email protected] destination transport-method http subscribe-to-alert-group diagnostic subscribe-to-alert-group environment subscribe-to-alert-group inventory periodic monthly subscribe-to-alert-group configuration periodic monthly subscribe-to-alert-group telemetry periodic daily Cryptochecksum:0ed0580e151af288d865f4f3603d792a : end asdm image disk0:/asdm-635.bin no asdm history enable

  Read the article

• Running Send_SMS method from BroadcastReceiver

  - by burmat

  My application is an auto-reply application for text messages. I have a BroadcastReceiver for when a message arrives, and I need it to run a public method (Send_SMS). SMS_Sender.sendSMS(phoneNumber, messageText); does not work however, and eclipse wants to change my method to static. This would not be an issue if I did not have more receivers that catch when the message is sent/delivered/etc in this class. These receivers are then errors for being contained in a static method. So my question is, how do I run this method from a broadcast receiver so I can send the auto reply whenever it is triggered with a received message? -Thank you in advance, Nate

  Read the article

• Multi serial devices on one port

  - by adopilot

  I am developing one software for managing parking lot. System is designed to use four HID RFID devices for authorization clients on gates. Each device should be connected to server by Serial port RS232. Now I wondering is there some device or method to join all that devices on one device and after that to I have only one RS232 cable connected to server. My problem is in that RFID card readers are simple (stupid) devices and there I am not able to change anything, but Ill like to know from which specific device is coming input. What Ill want to do with that new device which need to join four readers is to add suffix or prefix to string that sent from RFID card reader. So I can identify device that is sending card number to my server. I am developing my system on Win platforms.

  Read the article

• What is a good program, with PostScript output (for LaTeX), to make circuit diagrams?

  - by Breakthrough

  Hello; I just found out to my dismay that Visio 2007 does not include the ability to output drawings in EPS/PS formats, which makes it unsuitable for my uses. I wish to create various circuit digrams (including some texts for resistor values, voltage sources, etc...) with most electronic components (resistors, logic gates). Visio was a great tool for this, but I need to include these in lab reports which I am typesetting with LaTeX. The recommended format to include images in LaTeX is PostScript, so the fonts can be properly substituted, and the drawings scale properly. So my question: Is there a Windows program which will allow me to create circuit diagrams, add various labels, and export it to PostScript format?

  Read the article

• Nuggets of wisdom?

  - by Bill Karwin

  There are many quotes from famous computer scientists that have become the wisdom that guides our profession. For example: "Premature optimization is the root of all evil in programming." Donald Knuth (citing Hoare's Dictum) "Everyone knows that debugging is twice as hard as writing a program in the first place. So if you're as clever as you can be when you write it, how will you ever debug it?" Brian Kernighan And so on. My question is, what are your favorite words of wisdom about programming from someone who is not famous? Was it a friend, a coworker, or a teacher, or a family member? For example, a technical writer friend of mine said: "You can't get the right answers unless you ask the right questions." Thanks for all the contributions! The answer I selected was (a) specifically coding-related, and (b) stated by someone who is not technically famous (though he has a popular blog and a podcast and runs StackOverflow). I.e. he's no Bill Gates or Yogi Berra.

  Read the article

• The Steve Jobs Chronicles – Charlie and the Apple Factory [Video]

  - by Asian Angel

  Charlie and four other lucky children found the five golden tickets that Apple CEO Steve Jobs placed in random iPhone boxes. These tickets let the children have a once in a lifetime opportunity to explore the mysteries of the Apple Factory, but will they find out the true secrets of Apple’s success? Wait!! What is Bill Gates doing sneaking around the Apple Factory?! Charlie and the Apple Factory [via Geeks are Sexy] Latest Features How-To Geek ETC How to Get Amazing Color from Photos in Photoshop, GIMP, and Paint.NET Learn To Adjust Contrast Like a Pro in Photoshop, GIMP, and Paint.NET Have You Ever Wondered How Your Operating System Got Its Name? Should You Delete Windows 7 Service Pack Backup Files to Save Space? What Can Super Mario Teach Us About Graphics Technology? Windows 7 Service Pack 1 is Released: But Should You Install It? Save Files Directly from Your Browser to the Cloud in Chrome and Iron The Steve Jobs Chronicles – Charlie and the Apple Factory [Video] Google Chrome Updates; Faster, Cleaner Menus, Encrypted Password Syncing, and More Glowing Chess Set Combines LEDs, Chess, and DIY Electronics Fun Peaceful Alpine River on a Sunny Day [Wallpaper] Fast Society Creates Mini and Mobile Temporary Social Networks

  Read the article

• Friend of Red Gate

  - by Nick Harrison

  Friend of Red Gate I recently joined the friend of Red Gate program.   I am very honored to be included in this group.    This program is a big part of Red Gates community outreach.   If you are not familiar with Red Gate, I urge you to check them out.    They have some wonderful tools for the SQL Server community and the DotNet community.    They are also building up some tools for Exchange and Oracle. I was invited to join this program primarliy because of my work with Simple Talk and promoting one of their newest products, Reflector. Reflector is a wonderful tool.   I doubt that anyone who has ever used it would argue that point. Red Gate did a wonderful job taking over the support of Reflector.   I know many people had their doubts.    The initial release under Red Gate should set those fears to rest.   I was very impressed with how their developers interacted with their users during the preview phase! Red Gate is also a good partner for the community.    They activly support the community, sponsoring Code Camps, sponsoring User Groups, supporting the Forums, etc. And their tools are pretty amazing as well.

  Read the article

• Order Unlocked iPhone 4S From Apple Online Store. $649, No Contract, Any Network.

  - by Gopinath

  Apple opened the flood gates of iPhone 4S! Now you can buy the unlocked iPhone 4S directly from Apple instead of buying them from grey market. The Apple US Online store has started accepting order for unlocked iPhone 4S and at the moment the expected shipping time is around 1 to 2 weeks. Price of the phones starts from $649 for 16GB and goes up to $849 for 64GB version. These unlocked phones are free from monthly contracts, works on any GSM network around the globe. Sorry CDMA networks, unlocked iPhone 4S is not yet ready for you! Its a good move from Apple. This helps people from staying away from multi-year contracts and also visitors returning from USA now can buy an original unlocked iPhone to use in their home countries. Buy iPhone 4S from Apple Online Store This article titled,Order Unlocked iPhone 4S From Apple Online Store. $649, No Contract, Any Network., was originally published at Tech Dreams. Grab our rss feed or fan us on Facebook to get updates from us.

  Read the article

• Security Goes Underground

  - by BuckWoody

  You might not have heard of as many data breaches recently as in the past. As you’re probably aware, I call them out here as often as I can, especially the big ones in government and medical institutions, because I believe those can have lasting implications on a person’s life. I think that my data is personal – and I’ve seen the impact of someone having their identity stolen. It’s a brutal experience that I wouldn’t wish on anyone. So with all of that it stands to reason that I hold the data professionals to the highest standards on security. I think your first role is to ensure the data you have, number one because it can be so harmful, and number two because it isn’t yours. It belongs to the person that has that data. You might think I’m happy about that downturn in reported data losses. Well, I was, until I learned that companies have realized they suffer a lowering of their stock when they report it, but not when they don’t. So, since we all do what we are measured on, they don’t. So now, not only are they not protecting your information, they are hiding the fact that they are losing it. So take this as a personal challenge. Make sure you have a security audit on your data, and treat any breach like a personal failure. We’re the gatekeepers, so let’s keep the gates. Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

  Read the article

• How relevant is UTF-7 when it comes to parsing emails?

  - by J. Pablo Fernández

  I recently implemented incoming emails for an application and boy, did I open the gates of hell? Since then every other day an email arrives that makes the app fail in a different way. One of those things is emails encoded as UTF-7. Most emails come as ASCII, some of the Latin encodings, or thankfully, UTF-8. Hotmail error messages (like email address doesn't exist or quota exceeded) seem to come as UTF-7. Unfortunately, UTF-7 is not an encoding Ruby understands: > "hello world".encode("utf-8", "utf-7") Encoding::ConverterNotFoundError: code converter not found (UTF-7 to UTF-8) > Encoding::UTF_7 => #<Encoding:UTF-7 (dummy)> My application doesn't crash, it actually handles the email quite well, but it does send me a notification about the potential error. I spent some time googling and I can't find anyone that implemented the conversion, at least not as a Ruby 1.9.3 Encoding::Converter. So, my question is, since I never got an email with actual content, from an actual person, in UTF-7, how relevant is that encoding? can I safely ignore it?

  Read the article

• Why is NDA so hard to understand?

  - by Dave Campbell

  Maybe this concept is simpler for me because of all the jobs I've been on over the years requiring security clearances. I've signed quite a few NDA forms. Some for big companies, some for small, but the meaning of "NDA" remains constant: Non-Disclosure Agreement. To me, that takes no further explanation, but apparently it's confusing to some people, and I don't understand how you can be confused. The papers I signed with the U.S. Army in 1970 read "10 years and $10,000" for a violation... can't imagine what it's up to now, but THAT is a strict NDA :) So those things I've been told, I cannot talk about, period. Even if the entire world knows about them, I cannot speak about them until the information goes off NDA. An example was a Silverlight release a while back. It might have been Silverlight 3, I don't remember. Everyone was anxiously awaiting the release so they could post their material. Of course the entire world knew it was coming out and imminently so. Some enterprising folks had even found the bits on a server before the official announcement. So then the situation became: everyone knew about it, some were even coding with it and blogging about it and yet we couldn't talk about it. Scott Guthrie's posting about it opened the flood gates and then it went off NDA, but up until that moment, we were locked. Sitting out on the edge you're uninstalling and re-installing all the time and you get frustrated when things that used to work don't, but hey... those bits were still warm when you got 'em, and that's the fun. But that fun comes at a price, and the price is the NDA. Awkward yes, confusing no... See you at MIX10, and Stay in the 'Light! MIX10

  Read the article

• CEO Taken Captive in His Own Factory?

  - by Stephen Slade

  Last Friday was no ordinary day for Chip Starnes, the 42 year old factory owner of Specialty Medical Supplies in China. He recently announced movement of some of the production of their diabetes testing equipment from Beijing to Mumbai India.  Of the 110 employees at the facility, about 80 protested by blocking the doors and refusing to let Chip Starnes out of the facility.  He has been trapped in his office several days now.  The employees think the factory was closing but Mr. Starnes said it was not. Mis-information? Poor communications? Work-stoppage. This is a good example of supply chain disruption. Parked cars are blocking the entrance to the facility, front gates are chained close, the CEO a prisoner in his own factory. Chip Starnes was presented with documents to sign in Chinese indicating he would pay severance and other demands he did not understand, possibly bankrupting the company.    If you depend on supply from China and other foreign suppliers, how reliable are your sources? For example how are the shopfloor employee relations? Is it possible to predict these types of HR risks and plan around them? What are your contingencies? It's important to ask the right questions and hear good answers. Having tools in place to rapidly evaluate, assess and react to these disruptions are the keys to survival. Hear how leading organizations are reinforcing their supply chains and mitigating risk through technology with Oracle's latest release of Oracle Supply Chain Management. Source: WSJ pg.B1, June 25, 2013

  Read the article

• Were the first assemblers written in machine code?

  - by The111

  I am reading the book The Elements of Computing Systems: Building a Modern Computer from First Principles, which contains projects encompassing the build of a computer from boolean gates all the way to high level applications (in that order). The current project I'm working on is writing an assembler using a high level language of my choice, to translate from Hack assembly code to Hack machine code (Hack is the name of the hardware platform built in the previous chapters). Although the hardware has all been built in a simulator, I have tried to pretend that I am really constructing each level using only the tools available to me at that point in the real process. That said, it got me thinking. Using a high level language to write my assembler is certainly convenient, but for the very first assembler ever written (i.e. in history), wouldn't it need to be written in machine code, since that's all that existed at the time? And a correlated question... how about today? If a brand new CPU architecture comes out, with a brand new instruction set, and a brand new assembly syntax, how would the assembler be constructed? I'm assuming you could still use an existing high level language to generate binaries for the assembler program, since if you know the syntax of both the assembly and machine languages for your new platform, then the task of writing the assembler is really just a text analysis task and is not inherently related to that platform (i.e. needing to be written in that platform's machine language)... which is the very reason I am able to "cheat" while writing my Hack assembler in 2012, and use some preexisting high level language to help me out.

  Read the article

• ArchBeat Link-o-Rama for 2012-09-25

  - by Bob Rhubart

  Oracle 11gR2 RAC on Software Defined Network (SDN) | Gilbert Stan "The SDN [software defined network] idea is to separate the control plane and the data plane in networking and to virtualize networking the same way we have virtualized servers," explains Gil Standen. "This is an idea whose time has come because VMs and vmotion have created all kinds of problems with how to tell networking equipment that a VM has moved and to preserve connectivity to VPN end points, preserve IP, etc." H/T to Oracle ACE Director Tim Hall for the recommendation. ServerSent-Events on WebLogic Server | Steve Buttons "The HTML5 ServerSent-Event model provides a mechanism to allow browser clients to establish a uni-directional communication path to a server, where the server is then able to push messages to the browser at any point in time," explains Steve "Buttso" Buttons. Focus on Architects and Architecture This handy guide for sessions and other activities at Oracle OpenWorld 2012 focuses on IT architecture in all its many facets and permutations. Operating System Set-up for WebLogic Server | Rene van Wijk Oracle ACE Rene van Wijk shows you how to set-up an operating system for WebLogic Server. "We will use VMware as our virtualization platform and use CentOS as the operating system," says van Wijk. "We end the post by showing how the operating system can be tuned when running a Java process such as WebLogic Server." Free eBook: Oracle SOA Suite - In the Customer's Words If you find yourself in the position of having to sell the idea of Service-oriented Architecture to business stakeholders this free e-book may come in very handy. Check out "Oracle SOA Suite: In the Customer's Words. (Registration / Oracle.com login required.) Thought for the Day "The first rule of any technology used in a business is that automation applied to an efficient operation will magnify the efficiency. The second is that automation applied to an inefficient operation will magnify the inefficiency." — Bill Gates Source: BrainyQuote.com

  Read the article

• Complex SQL query help on aggregating values for nested subquery

  - by François Beausoleil

  Hi! I have people, companies, employees, events and event kinds. I'm making a report/followup sheet where people, companies and employees are the rows, and the columns are event kinds. Event kinds are simple values describing: "Promised Donation", "Received Donation", "Phoned", "Followed up" and such. Event kinds are ordered: CREATE TABLE event_kinds ( id, name, position); Events hold the actual reference to the event: CREATE TABLE events ( id, person_id, company_id, referrer_id, event_kind_id, created_at); referrer_id is another reference to people. It is the person which sent the information/tip along, and is an optional field, although I sometimes want to filter on an event_kind that has a specific referrer, while I don't for other event kinds. Notice I don't have an employee ID reference. The reference exists, but is implied. I have application code to validate that person_id and company_id really reference an employee record. The other tables are pretty basic: CREATE TABLE people ( id, name); CREATE TABLE companies ( id, name); CREATE TABLE employees ( id, person_id, company_id); I'm trying to achieve the following report: Referrer Phoned Promised Donated Francois Feb 16th Feb 20th Mar 1st Apple (Steve Jobs) Steve Ballmer Mar 3rd IBM Bill Gates Mar 7th The first row is a people record, the 2nd is an employee, and the 3rd is a company. If I asked for referrer Bill Gates for Phoned event kinds, I'd only see the 3rd row, while asking for Steve and Phoned would return no rows. Right now, I do 3 queries, one for companies, one for people and a last one for employees. I want the event kind columns to be ordered, but I do that in application code and show it properly there. Here's where I'm at so far: SELECT companies.id, companies.name, (SELECT events.id FROM events WHERE events.referrer_id = 1470 AND events.company_id = companies.id AND events.person_id IS NULL AND events.event_kind_id = 9 ORDER BY created_at DESC LIMIT 1) event_kind_9, (SELECT events.id FROM events WHERE events.company_id = companies.id AND events.person_id IS NULL AND events.event_kind_id = 10 ORDER BY created_at DESC LIMIT 1) event_kind_10, (SELECT events.created_at FROM events WHERE events.referrer_id = 1470 AND events.company_id = companies.id AND events.person_id IS NULL AND events.event_kind_id = 9 ORDER BY created_at DESC LIMIT 1) event_kind_9_order FROM "companies" SELECT people.id, people.name, (SELECT events.id FROM events WHERE events.referrer_id = 1470 AND events.company_id IS NULL AND events.person_id = people.id AND events.event_kind_id = 9 ORDER BY created_at DESC LIMIT 1) event_kind_9, (SELECT events.id FROM events WHERE events.company_id IS NULL AND events.person_id = people.id AND events.event_kind_id = 10 ORDER BY created_at DESC LIMIT 1) event_kind_10, (SELECT events.created_at FROM events WHERE events.referrer_id = 1470 AND events.company_id IS NULL AND events.person_id = people.id AND events.event_kind_id = 9 ORDER BY created_at DESC LIMIT 1) event_kind_9_order FROM "people" SELECT employees.id, employees.company_id, employees.person_id, (SELECT events.id FROM events WHERE events.referrer_id = 1470 AND events.company_id = employees.company_id AND events.person_id = employees.person_id AND events.event_kind_id = 9 ORDER BY created_at DESC LIMIT 1) event_kind_9, (SELECT events.id FROM events WHERE events.company_id = employees.company_id AND events.person_id = employees.person_id AND events.event_kind_id = 10 ORDER BY created_at DESC LIMIT 1) event_kind_10, (SELECT events.created_at FROM events WHERE events.referrer_id = 1470 AND events.company_id = employees.company_id AND events.person_id = employees.person_id AND events.event_kind_id = 9 ORDER BY created_at DESC LIMIT 1) event_kind_9_order FROM "employees" I rather suspect I'm doing this wrong. There should be an "easier" way to do it. One other filter criteria would be to filter on people/company names: WHERE LOWER(companies.name) LIKE '%apple%'. Note that I'm ordering by the dates of event_kind_9 here, and a secondary sort is by person/company name. To summarize: I want to paginate the result set, find the latest event for each cell, order the result set by the date of the latest event, and by company/person name, filter by referrer in some event kinds, but not others. For reference, I'm using PostgreSQL, from Ruby, ActiveRecord/Rails. The solution is pure SQL though.

  Read the article

• Robocopy launches and then hangs/just sits there

  - by NateO

  I'm setting up an archive process to store old files on an external hard drive. The computer in question is running Windows 7 Pro 32bit. We have a server folder with 150,000+ files in it, most of which are pretty small (below 200k). I'm trying to use robocopy in a batch file to do this. It was working fine the other day, now all it does upon launch is sit there. It shows me all the options and whatnot, and also lists the number of files in the directory and the directory itself, but it never gets past that line. If I switch the destination to the local C drive, it eventually starts copying files. Is there something in my batch file that needs to change? Or could there be a problem with the external Western Digital drive that I'm using? The WD drive currently is holding about 175,000 files. Here is the one line batch file I have: robocopy "\\cgifp01\Prepress\Public\ImportedPDF" "E:\OldFiles" *.* /R:2 /W:10 /MINAGE:15 /MOV /B /XJ /XF "blank_test.pdf" Thanks for any tips or ideas. Nate

  Read the article

• Can't create new Volume on Unallocated Space

  - by natediggs

  I installed Windows Server 2008 R2 on a Dell server that has one volume that is a 6 TB RAID 5 array. I created a 120GB install volume and I'm now trying to create a 5 TB data volume. For what ever reason Windows will not allow me to create a new volume out of all of the unalocated space. Windows will allow me to create a new volume out of one 2TB block of unallocated space but not the remaining 3.5 TB block. Tried to post a screen shot but I was blocked. If I right click on the 1949.85 GB block of space there is the option to create a new volume. If I click on the 3539.5 GB block of space that option is grayed out. If I go into diskpart and try to create a new partition, diskpart says that there is only 1949GBs free on the volume. I know this process works because I did the exact same thing on another server that we have that is the exact same hardware configuration on which I used the exact same Server 2008 R2 install image. Any help would be greatly appreciated. Nate

  Read the article

• Strange error occurring when using wcf to run query against sql server

  - by vondip

  Hi all, I am building an asp.net application, using II6 on windows server 2003 (vps hosting). I am confronted with an error I didn't receive on my development machine (windows 7, iis 7.5, 64 bit). When my wcf service tries launching my query running against a local sql server this is the error I receive: Memory gates checking failed because the free memory (43732992 bytes) is less than 5% of total memory. As a result, the service will not be available for incoming requests. To resolve this, either reduce the load on the machine or adjust the value of minFreeMemoryPercentageToActivateService on the serviceHostingEnvironment config element. and ideas??

  Read the article

• Excel tab sheet names vs. Visual Basic sheet names

  - by SteveNeedsSheetNames

  It seems that Visual Basic can not reference sheets according to user-modified sheet names. The worksheet tabs can have their names changed, but it seems that Visual Basic still thinks of the worksheet names as Sheet1, etc., despite the workbook tab having been changed to something useful. I have this: TABname = rng.Worksheet.Name ' Excel sheet TAB name, not VSB Sheetx name. Thanks, Bill Gates. but I would like to use sheet names in Visual Basic routines. The best I could come up so far is to Select Case the Worksheet Tab vs. Visual Basic names, which doesn't make my day. Visual Basic must know the Sheet1, Sheet2, etc., names. How can I get these associated with the Excel tab names so that I don't have to maintain a look-up table which changes with each new sheet or sheet tab re-naming? Thanks in advance for your replies.

  Read the article

• Large Scale VHDL modularization techniques

  - by oxinabox.ucc.asn.au

  I'm thinking about implimenting a 16 bit CPU in VHDL. A simplish CPU. ADD, MULS, NEG, BitShift, JUMP, Relitive Jump, BREQ, Relitive BREQ, i don't know somethign along these lines Probably all only working with 16bit operands. I might even cut it down and use only a single operand and a accumulator. With Some status regitsters, Carry, Zero, Neg (unless i use a Accumlator), I know how to design all the parts from logic gates, and plan to build them up from first priciples, So for my ALU I'll need to 'build' a ADDer, proably a Carry Look ahead, group adder, this adder it self is make up oa a couple of parts, wich are themselves made up of a couple of parts. Anyway, my problem is not the CPU design, or the VHDL (i know the language, more or less). It's how i should keep things organised. How should I use packages, How should I name my processes and port maps? (i've never seen the benifit of naming the port maps, or processes)

  Read the article

• Ugly thing and advantage of anonymos method -C#

  - by nettguy

  I was asked to explain the ugly thing and advantages of anonymous method. I explained possibly Ugly thing anonymous methods turning quickly into spaghetti code. Advantages We can produce thread safe code using anonymous method :Example static List<string> Names = new List<string>( new string[] { "Jon Skeet", "Marc Gravell", "David", "Bill Gates" }); static List<string> FindNamesStartingWith(string startingText) { return Names.FindAll( delegate(string name) { return name.StartsWith(startingText); }); } But really i did not know whether it is thread safe or not.I was asked to justify it. Can any one help me to understand (1) advantages of anonymous methods (2) Is the above code thread safe or not?

  Read the article

• Best way to learn how to use FPGAs

  - by Myrrdyn

  In next weeks probably I will have some little FPGA to play with. I have a programmer background (C, C++, Java mostly) and some (very) limited experience in electronics. What are the best tools to know if you want to develop on FPGAs? What are the best languages to study? (what HW description languages?) Have you some examples of little "toy projects" that can be interesting, easy, and "eye-opener"? Thanks in advance. Edit: More details: if I understood correctly, the device I will be playing on will have an ARM core (no idea which one) and a 300k gates FPGA I'm looking specifically at some Linux free sw / open source tools...

  Read the article

• Filter on button click D3.js?

  - by user1461701

  I'm working on a version of this bubble chart http://vallandingham.me/vis/gates/. As I'm using a different set of data - instead of the "All Grants" and "Grants by Year" buttons - I have one for 5 consecutive years - 2010, 2009 etc. My opening graph depicts the data for 2010 which is achieved by filtering the data from the .csv file , which contains the data for all 5 years. The problem I'm having is filtering and re-rendering the graph if another year is then chosen. I'd really appreciate it if anyone has any suggestions how I could simply achieve this? Thanks, Majella

  Read the article

• Hex Decompilers for PIC

  - by Chathuranga Chandrasekara

  I've faced to a problem with a PIC Micro controller. I have a micro-controller programmed by me long time ago and I lost the relevant source code and the schematic diagrams. Now I need to invert the value of a port. I can do this using some NOT gates but it is a big hassle to do so. or alternatively I will need to write the whole program back. I don't expect to see the code back in PIC C or MikroC. Having an understandable assembly code would be sufficient. So do anyone has any experience on a good HEX decompiler that I can use for this purpose? Any comments based on your experience? :)

  Read the article

• Large Scale VHDL techniques

  - by oxinabox.ucc.asn.au

  I'm thinking about implimenting a 16 bit CPU in VHDL. A simplish CPU. ADD, MULS, NEG, BitShift, JUMP, Relitive Jump, BREQ, Relitive BREQ, i don't know somethign along these lines Probably all only working with 16bit operands. I might even cut it down and use only a single operand and a accumulator. With Some status regitsters, Carry, Zero, Neg (unless i use a Accumlator), I know how to design all the parts from logic gates, and plan to build them up from first priciples, So for my ALU I'll need to 'build' a ADDer, proably a Carry Look ahead, group adder, this adder it self is make up oa a couple of parts, wich are themselves made up of a couple of parts. Anyway, my problem is not the CPU design, or the VHDL (i know the language, more or less). It's how i should keep things organised. How should I use packages, How should I name my processes and port maps? (i've never seen the benifit of naming the port maps, or processes)

  Read the article

< Previous Page | 7 8 9 10 11 12 13  | Next Page >