Search Results

Search found 5908 results on 237 pages for 'cody short'.

Page 110/237 | < Previous Page | 106 107 108 109 110 111 112 113 114 115 116 117  | Next Page >

• Intel graphic chipset and NVIDIA Geforce GTX560

  - by antoine

  I have an NVIDIA Geforce GTX560 with two video projectors and I would like to use the onboard Intel Graphic Chipset to plug an additional monitor. I saw the question : How can I use both Intel onboard and Nvidia graphics at the same time? but the answer is so short that I was not convinced. My motherboard (GIGABYTE GA-H61M-D2P-B3 (rev. 1.0)) equipped with Intel H61 Chipset allow shared memory between onboard and PCIe cards. And Windows 7 allow me to use the three outputs thanks to Intel's driver. I'm able to use the onboard graphic card but without graphical interface for now. I think i need intel driver for that. But I would like to know if I can setup my displays in xorg.conf with something like : Section "Device" Identifier "Device0" Driver "intel" EndSection Section "Device" Identifier "Device1" Driver "nvidia" EndSection Section "Device" Identifier "Device2" Driver "nvidia" EndSection Does anyone have successfully setup something like that ? Or should I burn my head experimenting it by myself ? Or is there any good reasons to discouraged me to try ? Thanks for your help. Antoine PS : i'm using Ubuntu 10.10 for now, but I could switch to another version. PS2 : i also read this : Use 3 monitors w/built-in intel adapter + two old nvidia PCI cards on 10.10? which doesn't tell me more about the possibilities to use Intel Graphic and Nvidia at the same time EDIT : according to that : Can not get Dual Monitors to work on Different GPUs, I should be able to run two Xserver one on Intel the other on Nvidia. I will try and post the result here.

  Read the article

• What&rsquo;s in your wallet, er&hellip;Inbox?

  - by johndoucette

  Since my first UUCP operation in UNIX to deliver and receive an email, I have always been challenged to find the ultimate email organizer. About a year ago, I switched to a very simple process of managing email and have found the ultimate in organization. On the craziest of days with 250+ emails, I keep my inbox empty. Here is how I do it; First, start with the following folders in your mailbox; Inbox    Archive    FollowUp    Hold Of course, all inbound emails will start in the Inbox. As you work throughout the day, follow these steps to keep your inbox empty; Read the email. Are you responsible for any action? If you are and can do it immediately, then do it. If you need to do it later, move the email to the “FollowUp” folder If you are not responsible for any action, move it to the archive folder. Use Outlook’s search to find them when you need them. If you will need to reference the email later in the week or for a short term (week or two), then move the email to the “Hold” folder As your day progresses, frequently review the FollowUp folder and accomplish the task *Notes: If I am waiting for someone to do something for me, I keep it in the FollowUp folder. As I review the folder, I am constantly reminded that there is something I am waiting on – and can send a simple reminder by forwarding the original email. I sometimes send myself a “todo” email and park it in the FollowUp folder I like to know how many emails are in the folders so I set the “Show total number of items” property on the folder to show the amount of emails.

  Read the article

• What You Said: How You Find New Books

  - by Jason Fitzpatrick

  Earlier this week we asked you to share your tips and tricks for finding fresh books to enjoy. Now we’re back with tips ranging from the old school to the digital. SJ highlights several of the most popular web-based tools for finding new books: Goodreads.com is quick and easy. Yournextread.com is fun and helps a lot. But I gotta be honest, Amazon’s suggestions are probably the most useful to me. TheFu suggests checking out award-winning lists and one rather quirky way to pick a good Sci-Fi book: For scifi, see Hugo winning books. Life is too short to read bad books. Sometimes that leads to an author with an entire series of books to enjoy. I really enjoy some of the scifi from the 40s and 50s. Wells stuff is always timeless too (and free). I’m less happy with Nebula winners–-different type of writers and not my personal taste. Secure Yourself by Using Two-Step Verification on These 16 Web Services How to Fix a Stuck Pixel on an LCD Monitor How to Factory Reset Your Android Phone or Tablet When It Won’t Boot

  Read the article

• The best way to have a pointer to several methods - critique requested

  - by user827992

  I'm starting with a short introduction of what i know from the C language: a pointer is a type that stores an adress or a NULL the * operator reads the left value of the variable on its right and use this value as address and reads the value of the variable at that address the & operator generate a pointer to the variable on its right so i was thinking that in C++ the pointers can work this way too, but i was wrong, to generate a pointer to a static method i have to do this: #include <iostream> class Foo{ public: static void dummy(void){ std::cout << "I'm dummy" << std::endl; }; }; int main(){ void (*p)(); p = Foo::dummy; // step 1 p(); p = &(Foo::dummy); // step 2 p(); p = Foo; // step 3 p->dummy(); return(0); } now i have several questions: why step 1 works why step 2 works too, looks like a "pointer to pointer" for p to me, very different from step 1 why step 3 is the only one that doesn't work and is the only one that makes some sort of sense to me, honestly how can i write an array of pointers or a pointer to pointers structure to store methods ( static or non-static from real objects ) what is the best syntax and coding style for generating a pointer to a method?

  Read the article

• Today's Links (6/28/2011)

  - by Bob Rhubart

  Connecting People, Processes, and Content: An Online Event | Brian Dirking Dirking shares information on an Oracle Online Forum coming up on July 19. Social Relationships don't count until they count | Steve Jones "It's actually the interactions that matter to back up the social experience rather than the existence of a social link," says Jones. ORACLENERD: KScope 11: Cary Millsap Commenting on Cary Millsap's KScope presentation on Agile, Oracle ACE Chet Justice says, "I fight with methodology on a daily basis, mostly resulting in me hitting my head against the closest wall." The Sage Kings of Antiquity | Richard Veryard "Given that the empirical evidence for enterprise architecture is fairly weak, anecdotal and inconclusive, we are still more dependent than we might like on the authority of experts," says Veryard, "whether this be semi-anonymous committees (such as TOGAF) or famous consultants (such as Zachman)." Oracle Business Intelligence Blog: New BI Mobile Demos "These are short videos that showcase some of the capabilities in our mobile app," says Abhinav Agarwal. "One focuses on the Oracle BI platform, while the other showcases what is possible with the mobile app accessing Oracle Business Intelligence Applications, like Financial Analytics." MySQL HA Events in the UK, Germany & France | Oracle's MySQL Blog Oracle is running MySQL High Availability breakfast seminars in London (June 29), Düsseldorf (July 13) and Paris (September 7). "During these free seminars, we will review the various options and technologies at your disposal to implement highly available and highly scalable MySQL infrastructures, as well as best practices in terms of architectures," says Bertrand Matthelié. VENNSTER BLOG: User Experience in Fusion apps "When I heard about the Fusion Applications User Experience efforts, I was skeptical," says Oracle ACE Director Lonneke Dikmans of Vennster "My view of Oracle and User Experience has changed drastically today." Power Your Cloud with Oracle Fusion Middleware Running in over 50 cities across the globe, this event is aimed at Architects, IT Managers, and technical leaders like you who are using Fusion Middleware or trying to learn more about middleware in the context of Cloud computing.

  Read the article

• How to explain a layperson why a developer should not be interrupted while neck-deep in coding?

  - by András Szepesházi

  If you just consider the second part of my question, "Why a developer should not be interrupted while neck-deep in coding", that has been discussed a number of times by smart people. Heck, even the co-founder of SO, Joel Spolsky, wrote a blog post about "getting in the zone" and "being knocked out of the zone" and why it takes an average of 15 minutes to achieve productivity when participating in complex, software development related tasks. So I think the why has been established. What I'm interested in is how to explain all that to somebody who doesn't know beans about Beans (khmm I mean software development). How to tell the wife, or the funny guy from accounting at the workplace, or the long time friend who pings you on Skype every 30 minutes with a "Wazzzzzzup?!", that all the interruptions have a much deeper impact on your work than the obvious 30 seconds they took from your time. Obviously you can't explain it by sentences like "I have to juggle a lot of variable names in my short term memory" unless you want to be the target of blank stares or friendly abuse. I'd like to be able to explain all that to non-developers in a way that will make them clearly understand - without being offensive, elitist or too technical. EDIT: Thanks to everyone for their great insights. I've accepted EpsilonVector's answer as his analogy was the closest one to my original needs. The "falling asleep" explanation is neither offensive nor technical, almost anyone can relate to it, and the consequences of getting disturbed while falling asleep or while being in the zone are very similar: you experience frustration and you "lose" 15-20 minutes of time.

  Read the article

• Choosing a (browser) game environment [closed]

  - by Iain

  I apologise in advance if this post is something you've heard a million times already or seems like a trolling attempt. I just want some advice and I'm coming up short with my own Google searches. Basically, I would like to start learning some game development in my own free time (nothing serious, just purely as a hobbyist for fun). I'd like to know what the communities opinions are on the old HTML5/Javascript v Flash argument but purely from a game development perspective. I know people say Flash is dying because of issues like SEO, memory/bandwidth usage and Apple dropping it on tablet and mobile devices, so is it worth me dedicating my free time to learning to use Flash/AS3 for game development or should I focus on HTML5/Javascript? At the moment, I'm not sure HTML5/Javascript is mature enough or has the support tools that Flash does (framework, IDE, etc) and there seems to be a lot more resources online for beginner Flash/AS3 programming. When I'm reading tutorials online for Flash/AS3 I always have it in the back of my head that I'm wasting my time because it won't be around in a few years and I should be investing that time learning HTML5/Javascript. Thoughts? Disclaimer: I'm not trying to spark a flame war or troll anyone - I believe in the right tools for the job and I don't want to waste my time learning something that won't be around in a few years.

  Read the article

• Is there such a thing as "closure" with software work?

  - by Bobby Tables

  I burned out last year (after a decade of fulltime programming jobs) and am on a sabbatical now. With all the self-examination I've started to figure out some of the root causes of my burnout, and one of the major ones is basically this: there was never any real closure in any of the work I've ever done. It was always a case of getting into an open-ended support/maintenance grind and going stale. When I first entered the industry, I had this image of programming work being very project-based. And I expected projects to have a start, beginning, and END. And then you move on and start on something totally new and fresh. Basically I never expected that a lot (most) of software work involves supporting and maintaining the same code base for open-ended long periods of time - years and even decades. That, combined with generally having itchy feet makes me think that burnout is inevitable for me, after 2-3 years, in ANY fulltime software job. All this sounds like I probably should have been a contractor instead of a fulltimer. But when I discuss this with people, a lot of them say that even THEN you can't really escape having to go back and maintain/support the stuff you worked on, over and over (eg. Coming back on support contracts, for example). The nature of software work is simply like that. There is no project closure, unlike in many other engineering fields. So my question is - Is there ANY programming work out there which is based on short to mid term projects/stints and then moving on cleanly? And is there any particular industry domain or specialization where this kind of project work is typical?

  Read the article

• ArchBeat Link-o-Rama for November 13, 2012

  - by Bob Rhubart

  This week on the OTN Solution Architect Homepage Make time to check out this week's features on the OTN Solution Architect Homepage, including: SOA Practitioner Guide: Identifying and Discovering Services Setting Up, Configuring, and Using an Oracle WebLogic Server Cluster OTN ArchBeat Podcast: Are You Future Proof (Conclusion) Keynote: New Paradigms for Application Architecture: From Applications to IT Services I this keynote address from the SOA, Cloud, and Service Technology Symposium, Anne Thomas Manes highlights the importance of adapting to the current trend marked by the convergence of mobile, social and cloud, moving away from app-centric design to service-based solutions. New Solaris Cluster! | Jeff Victor "Oracle Solaris Cluster 4.1 offers both High Availability (HA) and also Scalable Services capabilities," explains Jeff Victor. "HA delivers automatic restart of software on the same cluster node and/or automatic failover from a failed node to a working cluster node. Software and support is available for both x86 and SPARC systems." You'll find download links and other resources in Jeff's short post. ADF BC View Accessor To Centralize Business Logic Processing | Andrejus Baranovskis Oracle ACE Director Andrejus Baranovskis illustrates one way to implement a use case that requires a comparison between the current row status and the data returned by another query (no master-detail relationship). Thought for the Day "The danger from computers is not that they will eventually get as smart as men, but that we will meanwhile agree to meet them halfway." — Bernard Avishai Source: SoftwareQuotes.com

  Read the article

• Create MSDB Folders Through Code

  You can create package folders through SSMS, but you may also wish to do this as part of a deployment process or installation. In this case you will want programmatic method for managing folders, so how can this be done? The short answer is, go and look at the table msdb.dbo. sysdtspackagefolders90. This where folder information is stored, using a simple parent and child hierarchy format. To add new folder directly we just insert into the table - INSERT INTO dbo.sysdtspackagefolders90 ( folderid ,parentfolderid ,foldername) VALUES ( NEWID() -- New GUID for our new folder ,<<Parent Folder GUID>> -- Lookup the parent folder GUID if a child or another folder, or use the root GUID 00000000-0000-0000-0000-000000000000 ,<<Folder Name>>) -- New folder name There are also some stored procedures - sp_dts_addfolder sp_dts_deletefolder sp_dts_getfolder sp_dts_listfolders sp_dts_renamefolder To add a new folder to the root we could call the sp_dts_addfolder to stored procedure - EXEC msdb.dbo.sp_dts_addfolder @parentfolderid = '00000000-0000-0000-0000-000000000000' -- Root GUID ,@name = 'New Folder Name The stored procedures wrap very simple SQL statements, but provide a level of security, as they check the role membership of the user, and do not require permissions to perform direct table modifications.

  Read the article

• SharePoint 2010 in the cloud a.k.a. SharePoint Online

  - by Sahil Malik

  Ad:: SharePoint 2007 Training in .NET 3.5 technologies (more information). There are 3 ways to run SharePoint On premises, you buy the servers, and you run the servers. Hosted servers, where you don’t run the servers, but you let a hosting company run dedicated servers. Multi-tenant, like SharePoint online – this is what I am talking about in this blog post. Also known as SaaS (Software as a Service). The advantages of a cloud solution are undeniable. Availability, (SharePoint line offers a 99.9% uptime SLA) Reliability. Cost. Due to economies of scale, and no need to hire specialized dedicated staff. Scalability. Security. Flexibility – grow or shrink as you need to. If you are seriously considering SharePoint 2010 in the cloud, there are some things you need to know about SharePoint online. What will work - OOTB Customization, collaboration features etc. will work SharePoint Designer 2010 is supported, so no code workflows will work Visual Studio sandbox solutions, client object model will work. What won’t work - SharePoint 2010 online cloud environment supports only sandbox solutions. BCS, business connectivity services is not supported in SharePoint online. What you can do however is to host your services in Azure, and call them using Silverlight. Custom timer jobs will not work. Long story short, get used to Sandbox solutions – and the new way of programming. Sandbox solutions are pretty damn good. Most of the complaints I have heard around sandbox solutions being too restrictive, are uninformed mechanisms of doing things mired in the ways of 2002. .. or you could just live in 2002 too. Comment on the article ....

  Read the article

• RPi and Java Embedded GPIO: Hooking Up Your Wires for Java

  - by hinkmond

  So, you bought your blue jumper wires, your LEDs, your resistors, your breadboard, and your fill of Fry's for the day. How do you hook this cool stuff up to write Java code to blink them LEDs? I'll step you through it. First look at that pinout diagram of the GPIO header that's on your RPi. Find the pins in the corner of your RPi board and make sure to orient it the right way. The upper left corner pin should have the characters "P1" next to it on the board. That pin next to "P1" is your Pin #1 (in the diagram). Then, you can start counting left, right, next row, left, right, next row, left, right, and so on: Pins # 1, 2, next row, 3, 4, next row, 5, 6, and so on. Take one blue jumper wire and connect to Pin # 3 (GPIO0). Connect the other end to a resistor and then the other end of the resistor into the breadboard. Each row of grouped-together holes on a breadboard are connected, so plug in the short-end of a common cathode LED (long-end of a common anode LED) into a hole that is in the same grouping as where the resistor is plugged in. Then, connect the other end of the LED back to Pin # 6 (GND) on the RPi GPIO header. Now you have your first LED connected ready for you to write some Java code to turn it on and off. (As, extra credit you can connect 7 other LEDs the same way to with one lead to Pins # 5, 7, 11, 13, 15, 19 & 21). Whew! That wasn't so bad, was it? Next blog post on this thread will have some Java source code for you to try... Hinkmond

  Read the article

• Internet is far slower in Ubuntu than Windows 7 on dual-booted machine

  - by Tim

  Edit: I'll leave the original post as-is, but after further investigation, it appears that the problem is something to do with my wi-fi card. Speeds are normal when I connect via cable. Edit 2: Problem was solved. It was something to do with the wireless card drivers. I normally use Windows 7 on my laptop and have internet speeds that are normally about 15-20 Mb/s. I have recently dual-booted with Ubuntu 12.10, and have noticed that internet speeds are drastically slower in Ubuntu. When tested, speeds range from 0.2-2 Mb/s, although occasionally being significantly faster than that or even stopping completely for short periods of time. I've also noticed that when first booting into Ubuntu, speeds start fairly fast, and drop to incredibly slow with a few seconds to a few minutes. There's still some possibility that the issue may be with my ISP, as things seem slower than usual even in Windows, but I suspect that it is related to Ubuntu, as things are far slower in Ubuntu than in Windows. I'm wondering, what could be the cause of this? Potentially relevant information: -I've dual booted before on this machine with earlier versions of Ubuntu (different ISP at the time) with no problem. ISP: Rogers (Major Canadian ISP) System info (Gateway NV53a Laptop): Operating System MS Windows 7 Home Premium 64-bit CPU AMD Phenom II N970 Caspian 45nm Technology RAM 6.00 GB Dual-Channel DDR3 @ 664MHz (9-9-9-24) Motherboard Gateway SJV51_DN (Socket S1G4) Graphics Generic PnP Monitor (1366x768@60Hz) ATI Mobility Radeon HD 4250 (Acer Incorporated [ALI]) Hard Drives 733GB TOSHIBA TOSHIBA MK7559GSXP ATA Device (SATA) Networking info: Connected through Wi-Fi Atheros AR5B97 Wireless Network A

  Read the article

• PHP safe_mode is a pain, looking for advice (Ubuntu 12.04 server, public webserver)

  - by user73279

  Maybe askUbuntu isn't the right forum or I haven't provided the right search query but I haven't seen anything in my searching of askUbuntu on PHP safe_mode. I get lots of Windows Safe Mode and Ubuntu Safe Mode results but not PHP safe_mode. So I keep running into one issue after another regarding PHP safe_mode. (I write a lot of my own PHP code for various site maintenance tools and such.) I know safe_mode is going away in the next version of PHP but I still see a fair amount of advice recommending that you leave it enabled. I've recently consolidated from 3 servers down to 1 and at least one of those old servers had safe_mode disabled without any issues. (The lack of issues may have simply been a matter of good luck.) None of the previous 3 gave me this much trouble so I'm guessing so additional php.ini/PHP safe_mode setting was turned on for the new server. I primarily run WordPress for my websites with a few MediaWiki sites sprinkled in. And I am currently running into an issue using WordPress's auto update feature as it doesn't seem to be able to use fopen. WordPress is not relaying the actual error message to me but since I was just able to update the plugins I'm using this is a safe_mode problem. I've had a lot of safe_mode issues since consolidating to this new server. Long story short, the advice I'd seen to use safe_mode was all at least 2 years old. Do I really need it? If I disable PHP safe_mode are there a good set of security measures I should implement - i.e. chmod 640 /var/www/..., add this to your .htaccess, etc - to protect my server/sites? Thanks

  Read the article

• How to write a blog for SEO purpose

  - by Mathieu Imbert

  I have a photo sharing website, which provides very little textual content. Users can add tags to photos and a description, but it creates a lot of duplicate content, because most of the descriptions will be 'wow', 'lol', ... I don't think I should rely on users to build my SEO. I think it would be a great idea to write a blog, and use it to describe the best photos, start contests, explain themes, in short: create original content that search engines will love. Our website's main URL is like www.domain.com, and our new blog is hosted on blog.domain.com. From a SEO perspective, is it a good idea to keep the blog separate from the main site? This has the advantage to leave the original site unchanged, but will it add any page rank to the www.domain.com? If the blog ranks well it will obviously pass some page rank to the original through links. What do you think is the best option from a SEO perspective? Include the blog in www.domain.com? Or leave it in blog.domain.com?

  Read the article

• Upcoming: Oracle Advanced Benefits Advisor Webcasts Announced

  - by user793553

  Oracle support is pleased to announce a new webcast covering the Open Enrollment functionality in Oracle Advanced Benefits.  The webcast is repeated on three different dates, in order to make attendance easier, whatever timezone you operate in. These one-hour sessions are recommended for technical and functional users who will be having an Open Enrollment cycle in the next 12 months.  The session will review the best proactive practices recommended by Oracle Support regardless of when your Open Enrollment takes place.  It will review planning, patching, data corruption and critical checklists. TOPICS WILL INCLUDE: Planning Ahead for Open Enrollment testing Required Patches Test performance Avoid major patching/updates Data corruption issues A short, live demonstration (only if applicable) and question and answer period will be included.  Below is the schedule for the webcasts.  The same can be found in the MyOracleSupport Document Advisor Webcast Current Schedule Doc ID 740966.1 Please follow the links to register for your chosen session. Webcast Topic and Description Registration Details Date and Time Best Benefits Practices for Open Enrollment Session 3   Doc ID 1489318.1 October 17, 2012 at 16:00 US EST Best Benefits Practices for Open Enrollment Session 4   Doc ID 1489319.1 October 31, 2012 at 16:00 US EST Product Enhancements in R12.1.3 RUP 5 Session 2   Doc ID 1489320.1 November 07, 2012 at 16:00 US EST

  Read the article

• ArchBeat Link-o-Rama for 2012-09-18

  - by Bob Rhubart

  Eye on Architecture This week the Oracle Technology Network Solution Architect Homepage features an Oracle Reference Architecture for Software Engineering, a new podcast focusing on why IT governance is important whether you like it or not, and information on the next free OTN Architect Day event. Enabling WebLogic Administrator Group Inside Custom ADF Application | Andrejus Baranovskis A short but informative technical post from Oracle ACE Director Andrejus Baranovkis. Oracle OpenWorld 2012 Hands-on Lab: Leading Your Everyday Application Integration Projects with Enterprise SOA Yet another session to squeeze into your already-jammed Oracle OpenWorld schedule. This hands-on lab focuses on how "Oracle Enterprise Repository, Oracle Application Integration Architecture (AIA) Foundation Pack, and Oracle SOA Suite work together to help you drive your enterprisewide integration projects." Mass Metadata Updates with Folders | Kyle Hatlestad "With the release of WebCenter Content PS5, a new folder architecture called 'Framework Folders' was introduced," explains Fusion Middleware A-Team blogger Kyle Hatlestad. "This is meant to replace the folder architecture of 'Folders_g'. While the concepts of a folder structure and access to those folders through Desktop Integration Suite remain the same, the underlying architecture of the component has been completely rewritten." Creating your first OAM 11g R2 domain | Chris Johnson Prolific Fusion Middleware A-Team Blogger Chris Johnson reads the Oracle Identity and Access Management Installation Guide so you don't have to (though you probably should). Thought for the Day "Each pattern describes a problem which occurs over and over again in our environment, and then describes the core of the solution to that problem, in such a way that you can use this solution a million times over, without ever doing it the same way twice." — Christopher Alexander Source: SoftwareQuotes.com

  Read the article

• Game Review: Monument Valley

  Once again, it was a tweet that caught my attention... and the official description on the Play Store sounds good, too. "In Monument Valley you will manipulate impossible architecture and guide a silent princess through a stunningly beautiful world. Monument Valley is a surreal exploration through fantastical architecture and impossible geometry. Guide the silent princess Ida through mysterious monuments, uncovering hidden paths, unfolding optical illusions and outsmarting the enigmatic Crow People." So, let's check it out. What an interesting puzzle game Once again, I left some review on the Play Store: "Beautiful but short distraction Woohoo, what a great story behind the game. Using optical illusions and impossible geometries in this fantastic adventure of the silent princess just puts all the pieces perfectly together. Walking the amazing paths in the various levels and solving the riddles gives some decent hours of distraction but in the end you might have the urge to do more..." I can't remember exactly when and who tweeted about the game but honestly it caught my attention based on the simplicity of the design and the aspect that it seems to be an isometric design. The game relies heavily on optical illusions in order to guide to the silent princess Ida through her illusory adventure of impossible architecture and forgiveness. The game is set like a clockwork and you are turning, flipping and switching elements on the paths between the doors. Unfortunately, there aren't many levels and the game play lasted only some hours. Maybe there are more astonishing looking realms and interesting gimmicks in future versions. Play Store: Monument Valley Also, check out the latest game updates on the official web site of ustwo BTW, the game is also available on the Apple App Store and on Amazon Store for the Kindle Fire.

  Read the article

• Optimize Many-to-Many with SUMMARIZE and Other Techniques

  - by Marco Russo (SQLBI)

  We are still in the early days of DAX and even if I have been using it since 2 years ago, there is still a lot to learn on that. One of the topics that historically interests me (and many of the readers here, probably) is the many-to-many relationships between dimensions in a dimensional data model. When I and Alberto wrote the The Many to Many Revolution 2.0 we discovered the SUMMARIZE based pattern very late in the whitepaper writing. It is very important for performance optimization and it should be always used. In the last month, Gerhard Brueckl also presented an approach based on cross table filtering behavior that simplify the syntax involved, even if it’s harder to explain how it works internally. I published a short article titled Optimize Many-to-Many Calculation in DAX with SUMMARIZE and Cross Table Filtering on SQLBI website just to provide a quick reference to the three patterns available. A further study is still required to compare performance between SUMMARIZE and Cross Table Filtering patterns. Up to now, I haven’t observed big differences between them, even if their execution plans might be not identical and this suggest me that depending on other conditions you might favor one over the other.

  Read the article

• Question aboud Headings For Professionals <H1>... <H9> in SEO & Browsercompatibility Differences

  - by Sam

  We all know the importance ans significance of Headings for Professional Webmasters. These were known for professional developers as <h1>Heading 1</h1> h2 ... h6. As a daring webdeveloper I lately needed more short headings for complex structured document and i thought what the hell and went ahead and used in css h1,h2,h3,h4,h5,h6{ } h7{ } h8{ } h9{ } My experiment turned out to pay back. But only in Firefox, Safari, Chrome etc, not in Internet Explorer 8. Q1. Who(&When) decided that All headings should go upto h6, and not h4 or h7? Q2. Why h7 -h9 work perfect in all major browsers, except IE8? Q3. What is the significance for Bing,Yahoo and Googld in terms of recognition or headings h1 ~ h9? obviously h1 is more important than 2, but do they differentiate between h5 and h6? or not anymore after h3?

  Read the article

• New CAM Editor v2.3 with Open-XDX for Open Data APIs

  - by drrwebber

  Creating actual working XML exchanges, loading data from data stores, generating XML, testing, integrating with web services and then deployment delivery takes a lot of coding and effort. Then writing the documentation, models, schema and doing naming and design rule (NDR) checks and packaging all this together (such as for NIEM IEPD use). What if there was a tool that helped you do all that easily and simply? Welcome to the new Open-XDX and the CAM Editor! Open-XDX uses code-free techniques in combination with CAM templates and visual drag and drop to rapidly design your XML exchange. Then Open-XDX will automatically generate all the SQL for you, read the database data, generate and populate the valid output XML, and filter with parameters. To complete the processing solution Open-XDX works with web services and JDBC database connections as a callable module that can be deployed plug and play with your middleware stack, all with just a few lines of Java code (about 5 actually). You can build either Query/Response or Publish/Subscribe services from existing data stores to XML literally in minutes. To see a demonstration of using Open-XDX, a MySQL data store and integrating with Oracle Web Logic server please see this short few minutes video - http://youtube.com/user/TheCameditor There is also a Quick Guide available that provides more technical insights along with a sample pack download of templates and SQL that you can try for yourself. Head on over to our project resource site to learn more, download the latest CAM Editor and see links to all the resources and materials. We look forward to seeing how the developer community is able to jump start information sharing initiatives using this new innovative approach.

  Read the article

• Are web application usability issues equal to website usability issues?

  - by Kor

  I've been reading two books about web usability issues and tests (Rocket Surgery Made Easy¹ and Prioritizing Web Usability²) and they claim some strategies and typical problems about website usability and how to lead them. However, I want to do a web application, and I think I lost track of what I am trying to solve. These two books claim to work with raw websites (e-commerce, business sites, even intranet), but I'm not sure if everything about web usability is applicable to web application usability. They sure talk about always having available (and usable) the Back button, to focus on short information rather than big amounts of text, etc., but they could be inaccurate in deeper problems that may be easier (or just skippable) in regular websites. Has anybody some experience in this field and could tell me if both web applications and websites share their usability issues? Thanks in advance Edit: Quoting Wikipedia, a website is a collection of related web pages containing images, videos or other digital assets, and a web application is an application that is accessed over a network such as the Internet or an intranet. To sum up, both shows/lets you search/produce information but websites are "simple" in interaction and keep the classics of websites (one-click actions) and the other one is closer to desktop applications in the meaning of their uses and ways of interaction (double click, modal windows, asynchronous calls [to keep you in the same "environment" instead of reloading it] etc.). I don't know if this clarifies the difference. Edit 2: Quoting @Victor and myself, a website is anything running in your browser, but a web application is somewhat running in your browser that could be running in your desktop, with similar behaviors and features. Gmail is a web application that could replace Outlook. GDocs could replace Office. Grooveshark could replace your music player, etc.

  Read the article

• ImageResizer - AzureReader2 with Azure SDK 2.2

  - by Chris Skardon

  Originally posted on: http://geekswithblogs.net/cskardon/archive/2013/10/29/imageresizer---azurereader2-with-azure-sdk-2.2.aspxSo Azure SDK 2.2 came out recently, which means I can open my azure projects in VS 2013 (yay), so I decided to do an upgrade of my MVC4 project to MVC5, I followed this link on how to do the upgrade, and generally things went ok. I fire up my app, and run into a ‘binding’ issue, that AzureReader2 was trying to use Microsoft.WindowsAzure.Storage, Version=2.1.0.0 but alas, it couldn’t find it. I am not the only one (see stackoverflow), and one solution is to run ‘Add-BindingRedirect’ from the Package Manager Console, but that didn’t solve the problem for me, as it didn’t pick up on the Azure stuff, so I resorted to adding the redirect manually. So, in short, to get AzureReader2 to work with Azure SDK 2.2, you need to add the following to your web.config: <runtime> <assemblyBinding xmlns="urn:schemas-microsoft-com:asm.v1"> <!-- Other bindings here! --> <dependentAssembly> <assemblyIdentity name="Microsoft.WindowsAzure.Storage" publicKeyToken="31bf3856ad364e35" culture="neutral"/> <bindingRedirect oldVersion="0.0.0.0-2.1.0.3" newVersion="2.1.0.3"/> </dependentAssembly> </assemblyBinding>

  Read the article

• How does a game developer get feedback from gamers (not developers) or start a forum community without paying for advertising or hiring Q&A teams?

  - by Carter81

  I am familiar with a lot of game developer forums, but I'd assume this is much less likely to attract more casual commentators. I also fear that feedback from a gamer's perspective would often be tainted by their game dev perspective. For example, if I were making a RTS game and wanted to get feedback from "The RTS gamers" where would I go? Is there a general idea of what type of website or forum to go to? Do you go to specific game websites, to try to "steal" attention? Would this not equate to spam or inappropriate posting? What is considered appropriate and inappropriate? I am not asking for specifics. I am asking how one "starts a community", or how one "gets feedback from gamers" without resorting to spamming forums or 'advertising' just to see what sticks. What TYPE OF PLACE does one go? Are there already sites designed for this purpose? I tried going to what was once a very popular forum for feedback from what I believed was a niche hardcore group of gamers in the genre, but its popularity seemed to have died significantly; Leaving only trolls and very young teenagers. The resulting feedback was quite disappointing, mainly for how little feedback it resulted. Many years ago, feedback would flood in by the hundreds so quickly. Without this website, I am at a loss as to where to go to see what people think of ideas, gather feedback from a gamer's perspective (not a developer's perspective), or where to pull from to start my own site's forum. I am out of ideas of what to do, short of going to various game forums to post in the off-topic sections there.

  Read the article

• Should you put personal beliefs in your program?

  - by TheLQ

  Recently I've found two examples of programmer's personal beliefs in programs that have removed or crippled useful functionality uTorrent using KB (rarely used) vs Kb (what most ISPs and other programs use as their metric) in their current connection speed. Various attempts by others and me to give options to at least give an option to show in Kb have ended with "ISPs should use KB" Kleopatra (gpg4Win key manager) not having PGP Key Pictures since they "give a false sense of security" and "increase the size of certificates". While the latter is true, the former is debatable. Both of these hurt the program and its usefulness to me. uTorrent's forums used to be filled with people saying they have 10 Mb download pipe but uTorrent only goes up to 2 MB (not knowing that Mb != MB), and with feature requests to show in Mb. Kleopatra has lost usefulness to me since I don't have the functionality to add pictures to PGP keys. These all are political statements; developers attempting to make change in, in their minds important, issues. But should this come at a cost to end user functionality? If a programmer heavily believes X but everyone else believes Y, should the programmer refuse to add support for Y because in their mind X is horrible? In short, should a programmer make political statements in their program?

  Read the article

< Previous Page | 106 107 108 109 110 111 112 113 114 115 116 117  | Next Page >