Search Results

Search found 14257 results on 571 pages for 'intel atom developer prog'.

Page 110/571 | < Previous Page | 106 107 108 109 110 111 112 113 114 115 116 117  | Next Page >

  • C segmentation fault before/during return statement

    - by wolfPack88
    I print the value that I'm returning right before my return statement, and tell my code to print the value that was returned right after the function call. However, I get a segmentation fault after my first print statement and before my second (also interesting to note, this always happens on the third time the function is called; never the first or the second, never fourth or later). I tried printing out all of the data that I'm working on to see if the rest of my code was doing something it maybe shouldn't, but my data up to that point looks fine. Here's the function: int findHydrogen(struct Amino* amino, int nPos, float* diff, int totRead) { struct Atom* atoms; int* bonds; int numBonds; int i; int retVal; int numAtoms; numAtoms = (*amino).numAtoms; atoms = (struct Atom *) malloc(sizeof(struct Atom) * numAtoms); atoms = (*amino).atoms; numBonds = atoms[nPos].numBonds; bonds = (int *) malloc(sizeof(int) * numBonds); bonds = atoms[nPos].bonds; for(i = 0; i < (*amino).numAtoms; i++) printf("ATOM\t\t%d %s\t0001\t%f\t%f\t%f\n", i + 1, atoms[i].type, atoms[i].x, atoms[i].y, atoms[i].z); for(i = 0; i < numBonds; i++) if(atoms[bonds[i] - totRead].type[0] == 'H') { diff[0] = atoms[bonds[i] - totRead].x - atoms[nPos].x; diff[1] = atoms[bonds[i] - totRead].y - atoms[nPos].y; diff[2] = atoms[bonds[i] - totRead].z - atoms[nPos].z; retVal = bonds[i] - totRead; bonds = (int *) malloc(sizeof(int)); free(bonds); atoms = (struct Atom *) malloc(sizeof(struct Atom)); free(atoms); printf("2 %d\n", retVal); return retVal; } } As I mentioned before, it works fine the first two times I run it, the third time it prints the correct value of retVal, then seg faults somewhere before it gets to where I called the function, which I do as: hPos = findHydrogen((&aminoAcid[i]), nPos, diff, totRead); printf("%d\n", hPos);

    Read the article

  • Does Ubuntu 12.04 supports for B75 boards?

    - by rail02000
    I want to build a new computer with Intel G840 CPU and Gigabyte B75M-D3H motherboard and install Ubuntu (or Kubuntu) 12.04 64bit on it. However, I'm worried about whether the chip is too new and whether that Linux Kernel now has support for it. According to the article [Phoronix] Intel Core i7 3770K Ivy Bridge Linux Performance Review ,the Linux kernel is ready to work on the chip. Existing Intel Sandy Bridge motherboards/chipsets are compatible with Ivy Bridge processors, but earlier this month Intel launched the new Panther Point chipsets that are already compatible with Linux too: the B75, H77, Z75, Z77, HM75, HM76, UM77, and HM77. But I didn't find further information or cases about running Ubuntu on the chip. So,is it OK to run Ubuntu on the board? Do I need to upgrade the kernel to a newer version (3.4 or 3.5 etc.) to get the system more smoothly? Or should I choose boards with H61 chip? Thank for your response!

    Read the article

  • Is it already possible to enable Compiz on an i5 Thinkpad laptop?

    - by jmm
    Besides a number of other issues, I still cannot enable Compiz or any effects with Maverick on a Thinkpad X201. I understand this laptop is supported by Ubuntu, yet I have found a good number of posts reporting problems. I would like to know if they have been solved by now. Processor: 4x Intel(R) Core(TM) i5 CPU M 540 @ 2.53GHz Intel Corporation Core Processor Integrated Graphics Controller (rev 02) OpenGL Renderer Mesa DRI Intel(R) Ironlake Mobile GEM 20100330 DEVELOPMENT 2.6.35-27-generic #47-Ubuntu SMP Thanks for your help, jmm

    Read the article

  • Ubuntu Wireless not working on Lenovo t400

    - by VmaxBoss
    This problem started after upgrading to 12.04, an my system is 'up2date' Have tried most of the solution-proposals found on the net. lspci -nnk | grep -iA2 net 00:19.0 Ethernet controller [0200]: Intel Corporation 82567LF Gigabit Network Connection [8086:10bf] (rev 03) Subsystem: Lenovo Device [17aa:20ee] Kernel driver in use: e1000e 03:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 5100 AGN [Shiloh] Network Connection [8086:4237] Subsystem: Intel Corporation WiFi Link 5100 AGN [8086:1211] Kernel driver in use: iwlagn iwconfig lo no wireless extensions. eth0 no wireless extensions. wlan0 IEEE 802.11abgn ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=15 dBm Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:off sudo lshw -C network *-network description: Ethernet interface product: 82567LF Gigabit Network Connection vendor: Intel Corporation physical id: 19 bus info: pci@0000:00:19.0 logical name: eth0 version: 03 serial: 00:22:68:1a:c4:75 size: 100Mbit/s capacity: 1Gbit/s width: 32 bits clock: 33MHz capabilities: pm msi bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=e1000e driverversion=1.0.2-k2 duplex=full firmware=1.8-3 ip=192.168.2.154 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:29 memory:fc000000-fc01ffff memory:fc024000-fc024fff ioport:1820(size=32) *-network DISABLED description: Wireless interface product: PRO/Wireless 5100 AGN [Shiloh] Network Connection vendor: Intel Corporation physical id: 0 bus info: pci@0000:03:00.0 logical name: wlan0 version: 00 serial: 00:26:c6:6c:2d:24 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlagn latency=0 multicast=yes wireless=IEEE 802.11abgn resources: irq:30 memory:f4300000-f4301fff Please help Br/VB

    Read the article

  • PCI function number for SATA AHCI controller

    - by Look Alterno
    I'm debugging a second stage boot loader for a PC with SATA AHCI controller. I'm able to enumerate the PCI bus and find the hard disk. So far, so good. Now, lspci in my notebook (Dell Inspiron 1525) show me: -[0000:00]-+-1f.0 Intel Corporation 82801HEM (ICH8M) LPC Interface Controller +-1f.1 Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller +-1f.2 Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller \-1f.3 Intel Corporation 82801H (ICH8 Family) SMBus Controller My question: Is SATA AHCI Controller always function 2 in any PC? If not, how I found? I don't pretend to be general; booting my notebook will be good enough, without compromise further refinements.

    Read the article

  • handling matrix data in python

    - by Ovisek
    I was trying to progressively subtract values of a 3D matrix. The matrix looks like: ATOM 1223 ZX SOD A 11 2.11 -1.33 12.33 ATOM 1224 ZY SOD A 11 -2.99 -2.92 20.22 ATOM 1225 XH HEL A 12 -3.67 9.55 21.54 ATOM 1226 SS ARG A 13 -6.55 -3.09 42.11 ... here the last three columns are representing values for axes x,y,z respectively. now I what I wanted to do is, take the values of x,y,z for 1st line and subtract with 2nd,3rd,4th line in a iterative way and print the values for each axes. I was using: for line in map(str.split,inp): x = line[-3] y = line[-2] z = line[-1] for separating the values, but how to do in iterative way. should I do it by using Counter.

    Read the article

  • About my main Project

    - by user207365
    My project is to build a AI(Artificial Intelligence) system in which i am planning to have a raspberry pi or Intel i3/i5 processor. Raspberry pi is small and efficient but i don't know whether it can support 2 TB or more external hard disk. Where as in Intel i can have internal hard disk and at the same time external also and will be more faster with 2gb or 4gb RAM. Which is better Raspberry pi or Intel,is it possible to stimulate my ubuntu in Intel processor. the main reason using processor it to give the system decision making capability ,understanding and analyzing capabilities using different algorithm's .my processor should analyze the condition take proper steps in running the appropriate application

    Read the article

  • Cannot determine ethernet address for proxy ARP on PPTP

    - by Linux Intel
    I installed pptp server on a centos 6 64bit server PPTP Server ip : 55.66.77.10 PPTP Local ip : 10.0.0.1 Client1 IP : 10.0.0.60 centos 5 64bit Client2 IP : 10.0.0.61 centos5 64bit PPTP Server can ping Client1 And client 1 can ping PPTP Server PPTP Server can ping Client2 And client 2 can ping PPTP Server The problem is client 1 can not ping Client 2 and i get this error also on PPTP server error log Cannot determine ethernet address for proxy ARP Ping from Client2 to Client1 PING 10.0.0.60 (10.0.0.60) 56(84) bytes of data. --- 10.0.0.60 ping statistics --- 6 packets transmitted, 0 received, 100% packet loss, time 5000ms route -n on PPTP Server Destination Gateway Genmask Flags Metric Ref Use Iface 10.0.0.60 0.0.0.0 255.255.255.255 UH 0 0 0 ppp0 10.0.0.61 0.0.0.0 255.255.255.255 UH 0 0 0 ppp1 55.66.77.10 0.0.0.0 255.255.255.248 U 0 0 0 eth0 10.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 eth0 0.0.0.0 55.66.77.19 0.0.0.0 UG 0 0 0 eth0 route -n On Client 1 Destination Gateway Genmask Flags Metric Ref Use Iface 10.0.0.1 0.0.0.0 255.255.255.255 UH 0 0 0 ppp0 55.66.77.10 70.14.13.19 255.255.255.255 UGH 0 0 0 eth0 10.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 eth1 0.0.0.0 70.14.13.19 0.0.0.0 UG 0 0 0 eth0 route -n On Client 2 Destination Gateway Genmask Flags Metric Ref Use Iface 10.0.0.1 0.0.0.0 255.255.255.255 UH 0 0 0 ppp0 55.66.77.10 84.56.120.60 255.255.255.255 UGH 0 0 0 eth1 10.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 eth0 0.0.0.0 84.56.120.60 0.0.0.0 UG 0 0 0 eth1 cat /etc/ppp/options.pptpd on PPTP server ############################################################################### # $Id: options.pptpd,v 1.11 2005/12/29 01:21:09 quozl Exp $ # # Sample Poptop PPP options file /etc/ppp/options.pptpd # Options used by PPP when a connection arrives from a client. # This file is pointed to by /etc/pptpd.conf option keyword. # Changes are effective on the next connection. See "man pppd". # # You are expected to change this file to suit your system. As # packaged, it requires PPP 2.4.2 and the kernel MPPE module. ############################################################################### # Authentication # Name of the local system for authentication purposes # (must match the second field in /etc/ppp/chap-secrets entries) name pptpd # Strip the domain prefix from the username before authentication. # (applies if you use pppd with chapms-strip-domain patch) #chapms-strip-domain # Encryption # (There have been multiple versions of PPP with encryption support, # choose with of the following sections you will use.) # BSD licensed ppp-2.4.2 upstream with MPPE only, kernel module ppp_mppe.o # {{{ refuse-pap refuse-chap refuse-mschap # Require the peer to authenticate itself using MS-CHAPv2 [Microsoft # Challenge Handshake Authentication Protocol, Version 2] authentication. require-mschap-v2 # Require MPPE 128-bit encryption # (note that MPPE requires the use of MSCHAP-V2 during authentication) require-mppe-128 # }}} # OpenSSL licensed ppp-2.4.1 fork with MPPE only, kernel module mppe.o # {{{ #-chap #-chapms # Require the peer to authenticate itself using MS-CHAPv2 [Microsoft # Challenge Handshake Authentication Protocol, Version 2] authentication. #+chapms-v2 # Require MPPE encryption # (note that MPPE requires the use of MSCHAP-V2 during authentication) #mppe-40 # enable either 40-bit or 128-bit, not both #mppe-128 #mppe-stateless # }}} # Network and Routing # If pppd is acting as a server for Microsoft Windows clients, this # option allows pppd to supply one or two DNS (Domain Name Server) # addresses to the clients. The first instance of this option # specifies the primary DNS address; the second instance (if given) # specifies the secondary DNS address. #ms-dns 10.0.0.1 #ms-dns 10.0.0.2 # If pppd is acting as a server for Microsoft Windows or "Samba" # clients, this option allows pppd to supply one or two WINS (Windows # Internet Name Services) server addresses to the clients. The first # instance of this option specifies the primary WINS address; the # second instance (if given) specifies the secondary WINS address. #ms-wins 10.0.0.3 #ms-wins 10.0.0.4 # Add an entry to this system's ARP [Address Resolution Protocol] # table with the IP address of the peer and the Ethernet address of this # system. This will have the effect of making the peer appear to other # systems to be on the local ethernet. # (you do not need this if your PPTP server is responsible for routing # packets to the clients -- James Cameron) proxyarp # Normally pptpd passes the IP address to pppd, but if pptpd has been # given the delegate option in pptpd.conf or the --delegate command line # option, then pppd will use chap-secrets or radius to allocate the # client IP address. The default local IP address used at the server # end is often the same as the address of the server. To override this, # specify the local IP address here. # (you must not use this unless you have used the delegate option) #10.8.0.100 # Logging # Enable connection debugging facilities. # (see your syslog configuration for where pppd sends to) debug # Print out all the option values which have been set. # (often requested by mailing list to verify options) #dump # Miscellaneous # Create a UUCP-style lock file for the pseudo-tty to ensure exclusive # access. lock # Disable BSD-Compress compression nobsdcomp # Disable Van Jacobson compression # (needed on some networks with Windows 9x/ME/XP clients, see posting to # poptop-server on 14th April 2005 by Pawel Pokrywka and followups, # http://marc.theaimsgroup.com/?t=111343175400006&r=1&w=2 ) novj novjccomp # turn off logging to stderr, since this may be redirected to pptpd, # which may trigger a loopback nologfd # put plugins here # (putting them higher up may cause them to sent messages to the pty) cat /etc/ppp/options.pptp on Client1 and Client2 ############################################################################### # $Id: options.pptp,v 1.3 2006/03/26 23:11:05 quozl Exp $ # # Sample PPTP PPP options file /etc/ppp/options.pptp # Options used by PPP when a connection is made by a PPTP client. # This file can be referred to by an /etc/ppp/peers file for the tunnel. # Changes are effective on the next connection. See "man pppd". # # You are expected to change this file to suit your system. As # packaged, it requires PPP 2.4.2 or later from http://ppp.samba.org/ # and the kernel MPPE module available from the CVS repository also on # http://ppp.samba.org/, which is packaged for DKMS as kernel_ppp_mppe. ############################################################################### # Lock the port lock # Authentication # We don't need the tunnel server to authenticate itself noauth # We won't do PAP, EAP, CHAP, or MSCHAP, but we will accept MSCHAP-V2 # (you may need to remove these refusals if the server is not using MPPE) refuse-pap refuse-eap refuse-chap refuse-mschap # Compression # Turn off compression protocols we know won't be used nobsdcomp nodeflate # Encryption # (There have been multiple versions of PPP with encryption support, # choose which of the following sections you will use. Note that MPPE # requires the use of MSCHAP-V2 during authentication) # # Note that using PPTP with MPPE and MSCHAP-V2 should be considered # insecure: # http://marc.info/?l=pptpclient-devel&m=134372640219039&w=2 # https://github.com/moxie0/chapcrack/blob/master/README.md # http://technet.microsoft.com/en-us/security/advisory/2743314 # http://ppp.samba.org/ the PPP project version of PPP by Paul Mackarras # ppp-2.4.2 or later with MPPE only, kernel module ppp_mppe.o # If the kernel is booted in FIPS mode (fips=1), the ppp_mppe.ko module # is not allowed and PPTP-MPPE is not available. # {{{ # Require MPPE 128-bit encryption #require-mppe-128 # }}} # http://mppe-mppc.alphacron.de/ fork from PPP project by Jan Dubiec # ppp-2.4.2 or later with MPPE and MPPC, kernel module ppp_mppe_mppc.o # {{{ # Require MPPE 128-bit encryption #mppe required,stateless # }}} IPtables is stopped on clients and server, Also net.ipv4.ip_forward = 1 is enabled on PPTP Server. How can i solve this problem .?

    Read the article

  • fcgi php.ini override

    - by Linux Intel
    I'm using cPanel on centos5 64bit installed. PHP handler is : fcgi cat /usr/local/apache/conf/php.conf output is : LoadModule fcgid_module modules/mod_fcgid.so MaxRequestsPerProcess 500 FCGIWrapper /usr/local/cpanel/cgi-sys/php5 .php5 FCGIWrapper /usr/local/cpanel/cgi-sys/php5 .php4 FCGIWrapper /usr/local/cpanel/cgi-sys/php5 .php FCGIWrapper /usr/local/cpanel/cgi-sys/php5 .php3 FCGIWrapper /usr/local/cpanel/cgi-sys/php5 .php2 FCGIWrapper /usr/local/cpanel/cgi-sys/php5 .phtml AddHandler fcgid-script .php5 .php4 .php .php3 .php2 .phtml Apache/2.2.22 , PHP 5.2.17 How can i use custom php.ini for a specific account .?

    Read the article

  • Web SMTP Server(foo.com) will not send mail to exchange server which is also(foo.com)

    - by Atom
    I think I understand this problem fully, but I do not know how to approach it or where to go in terms of troubleshooting. I've got my one domain http://foo.com that runs a Zen Cart installation that needs to be able to send emails to users(order confirmation, password reset). This works fine to send to any other domain BUT foo.com. I'm running a locally hosted exchange server that is foo.com, and we can send and receive email just fine. If I run tail -f /usr/local/psa/var/log/maillog I recieve this error: Apr 1 10:08:51 foo qmail-local-handlers[25824]: Handlers Filter before-local for qmail started ... Apr 1 10:08:51 foo qmail-local-handlers[25824]: from= Apr 1 10:08:51 foo qmail-local-handlers[25824]: [email protected] Apr 1 10:08:51 foo qmail-local-handlers[25824]: cannot reinject message to '[email protected]' Apr 1 10:08:51 foo qmail: 1270141731.583139 delivery 32410: failure: This_address_no_longer_accepts_mail./ Apr 1 10:08:51 foo qmail: 1270141731.584098 status: local 0/10 remote 0/20 I understand that the foo.com SMTP service doesn't have any account but the one that is used to authenticate mail being sent, so of course, I understand why it's saying 'this address no longer accepts mail'. My question is, how can I get the foo.com(web) SMTP service to handle emails meant for my exchange server([email protected]) or how do I handle the mail that needs to be sent to our exchange server? Is this something to do with MX records? Thanks in advance A

    Read the article

  • PPTP ping client to client error

    - by Linux Intel
    I installed pptp server on a centos 6 64bit server PPTP Server ip : 55.66.77.10 PPTP Local ip : 10.0.0.1 Client1 IP : 10.0.0.60 centos 5 64bit Client2 IP : 10.0.0.61 centos5 64bit PPTP Server can ping Client1 And client 1 can ping PPTP Server PPTP Server can ping Client2 And client 2 can ping PPTP Server The problem is client 1 can not ping Client 2 route -n on PPTP Server Destination Gateway Genmask Flags Metric Ref Use Iface 10.0.0.60 0.0.0.0 255.255.255.255 UH 0 0 0 ppp0 10.0.0.61 0.0.0.0 255.255.255.255 UH 0 0 0 ppp1 55.66.77.10 0.0.0.0 255.255.255.248 U 0 0 0 eth0 10.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 eth0 0.0.0.0 55.66.77.19 0.0.0.0 UG 0 0 0 eth0 route -n On Client 1 Destination Gateway Genmask Flags Metric Ref Use Iface 10.0.0.1 0.0.0.0 255.255.255.255 UH 0 0 0 ppp0 55.66.77.10 70.14.13.19 255.255.255.255 UGH 0 0 0 eth0 10.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 eth1 0.0.0.0 70.14.13.19 0.0.0.0 UG 0 0 0 eth0 route -n On Client 2 Destination Gateway Genmask Flags Metric Ref Use Iface 10.0.0.1 0.0.0.0 255.255.255.255 UH 0 0 0 ppp0 55.66.77.10 84.56.120.60 255.255.255.255 UGH 0 0 0 eth1 10.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 eth0 0.0.0.0 84.56.120.60 0.0.0.0 UG 0 0 0 eth1 cat /etc/ppp/options.pptpd on PPTP server ############################################################################### # $Id: options.pptpd,v 1.11 2005/12/29 01:21:09 quozl Exp $ # # Sample Poptop PPP options file /etc/ppp/options.pptpd # Options used by PPP when a connection arrives from a client. # This file is pointed to by /etc/pptpd.conf option keyword. # Changes are effective on the next connection. See "man pppd". # # You are expected to change this file to suit your system. As # packaged, it requires PPP 2.4.2 and the kernel MPPE module. ############################################################################### # Authentication # Name of the local system for authentication purposes # (must match the second field in /etc/ppp/chap-secrets entries) name pptpd # Strip the domain prefix from the username before authentication. # (applies if you use pppd with chapms-strip-domain patch) #chapms-strip-domain # Encryption # (There have been multiple versions of PPP with encryption support, # choose with of the following sections you will use.) # BSD licensed ppp-2.4.2 upstream with MPPE only, kernel module ppp_mppe.o # {{{ refuse-pap refuse-chap refuse-mschap # Require the peer to authenticate itself using MS-CHAPv2 [Microsoft # Challenge Handshake Authentication Protocol, Version 2] authentication. require-mschap-v2 # Require MPPE 128-bit encryption # (note that MPPE requires the use of MSCHAP-V2 during authentication) require-mppe-128 # }}} # OpenSSL licensed ppp-2.4.1 fork with MPPE only, kernel module mppe.o # {{{ #-chap #-chapms # Require the peer to authenticate itself using MS-CHAPv2 [Microsoft # Challenge Handshake Authentication Protocol, Version 2] authentication. #+chapms-v2 # Require MPPE encryption # (note that MPPE requires the use of MSCHAP-V2 during authentication) #mppe-40 # enable either 40-bit or 128-bit, not both #mppe-128 #mppe-stateless # }}} # Network and Routing # If pppd is acting as a server for Microsoft Windows clients, this # option allows pppd to supply one or two DNS (Domain Name Server) # addresses to the clients. The first instance of this option # specifies the primary DNS address; the second instance (if given) # specifies the secondary DNS address. #ms-dns 10.0.0.1 #ms-dns 10.0.0.2 # If pppd is acting as a server for Microsoft Windows or "Samba" # clients, this option allows pppd to supply one or two WINS (Windows # Internet Name Services) server addresses to the clients. The first # instance of this option specifies the primary WINS address; the # second instance (if given) specifies the secondary WINS address. #ms-wins 10.0.0.3 #ms-wins 10.0.0.4 # Add an entry to this system's ARP [Address Resolution Protocol] # table with the IP address of the peer and the Ethernet address of this # system. This will have the effect of making the peer appear to other # systems to be on the local ethernet. # (you do not need this if your PPTP server is responsible for routing # packets to the clients -- James Cameron) proxyarp # Normally pptpd passes the IP address to pppd, but if pptpd has been # given the delegate option in pptpd.conf or the --delegate command line # option, then pppd will use chap-secrets or radius to allocate the # client IP address. The default local IP address used at the server # end is often the same as the address of the server. To override this, # specify the local IP address here. # (you must not use this unless you have used the delegate option) #10.8.0.100 # Logging # Enable connection debugging facilities. # (see your syslog configuration for where pppd sends to) debug # Print out all the option values which have been set. # (often requested by mailing list to verify options) #dump # Miscellaneous # Create a UUCP-style lock file for the pseudo-tty to ensure exclusive # access. lock # Disable BSD-Compress compression nobsdcomp # Disable Van Jacobson compression # (needed on some networks with Windows 9x/ME/XP clients, see posting to # poptop-server on 14th April 2005 by Pawel Pokrywka and followups, # http://marc.theaimsgroup.com/?t=111343175400006&r=1&w=2 ) novj novjccomp # turn off logging to stderr, since this may be redirected to pptpd, # which may trigger a loopback nologfd # put plugins here # (putting them higher up may cause them to sent messages to the pty) cat /etc/ppp/options.pptp on Client1 and Client2 ############################################################################### # $Id: options.pptp,v 1.3 2006/03/26 23:11:05 quozl Exp $ # # Sample PPTP PPP options file /etc/ppp/options.pptp # Options used by PPP when a connection is made by a PPTP client. # This file can be referred to by an /etc/ppp/peers file for the tunnel. # Changes are effective on the next connection. See "man pppd". # # You are expected to change this file to suit your system. As # packaged, it requires PPP 2.4.2 or later from http://ppp.samba.org/ # and the kernel MPPE module available from the CVS repository also on # http://ppp.samba.org/, which is packaged for DKMS as kernel_ppp_mppe. ############################################################################### # Lock the port lock # Authentication # We don't need the tunnel server to authenticate itself noauth # We won't do PAP, EAP, CHAP, or MSCHAP, but we will accept MSCHAP-V2 # (you may need to remove these refusals if the server is not using MPPE) refuse-pap refuse-eap refuse-chap refuse-mschap # Compression # Turn off compression protocols we know won't be used nobsdcomp nodeflate # Encryption # (There have been multiple versions of PPP with encryption support, # choose which of the following sections you will use. Note that MPPE # requires the use of MSCHAP-V2 during authentication) # # Note that using PPTP with MPPE and MSCHAP-V2 should be considered # insecure: # http://marc.info/?l=pptpclient-devel&m=134372640219039&w=2 # https://github.com/moxie0/chapcrack/blob/master/README.md # http://technet.microsoft.com/en-us/security/advisory/2743314 # http://ppp.samba.org/ the PPP project version of PPP by Paul Mackarras # ppp-2.4.2 or later with MPPE only, kernel module ppp_mppe.o # If the kernel is booted in FIPS mode (fips=1), the ppp_mppe.ko module # is not allowed and PPTP-MPPE is not available. # {{{ # Require MPPE 128-bit encryption #require-mppe-128 # }}} # http://mppe-mppc.alphacron.de/ fork from PPP project by Jan Dubiec # ppp-2.4.2 or later with MPPE and MPPC, kernel module ppp_mppe_mppc.o # {{{ # Require MPPE 128-bit encryption #mppe required,stateless # }}} IPtables are stopped on clients and server, Also net.ipv4.ip_forward = 1 is enabled on PPTP Server. How can i solve this problem .?

    Read the article

  • Last step in HDD Recovery (fixing windows)

    - by Atom Computing
    My dad’s hard drive corrupted which was a result of many bad sectors. Anyway, I made a clone of the drive and have now repaired it totally (recreating the MBR and MFT) and doing a series of ChkDsk's on it. I can now see all the files and folder on it and it is all intact. I currently have it as a slave in my computer (where I was doing all the repairs). When putting it back into the computer, it comes up with "A disk read error occurred: Press Ctrl + Alt + Del to Restart". I don’t know why this is happening but think it might have something to do with file permissions. I have tried a start-up recovery on the Vista boot CD and it found no problems. When trying to apply file permissions (and creating file perms for the SYSTEM group (as it didn’t have any for SYSTEM group)) it couldn't apply them for some of the System32 folder files. I have tried applying them as admin and with as powerful privileges I can get. All to no avail. When it is in my PC I can boot it up (I added it into my bootloader) and it boots up fine except when it logs in it comes up with the error - "Rundll32.exe - Windows cannot access the specified device, path or file. You may not have the appropriate permissions to access the item" This message keeps coming back and nothing loads at all. Any help would be greatly received as I have got so far with the data recovery and want to avoid a reformat at all costs due to the vast number of programs installed and I don’t have much time on my hands! Thanks

    Read the article

  • Convert from apache rewrite to nginx

    - by Linux Intel
    I want to convert from apache rewrite modules to nginx RewriteCond %{QUERY_STRING} mosConfig_[a-zA-Z_]{1,21}(=|\%3D) [OR] RewriteCond %{QUERY_STRING} base64_encode.*\(.*\) [OR] RewriteCond %{QUERY_STRING} (\<|%3C).*script.*(\>|%3E) [NC,OR] RewriteCond %{QUERY_STRING} GLOBALS(=|\[|\%[0-9A-Z]{0,2}) [OR] RewriteCond %{QUERY_STRING} _REQUEST(=|\[|\%[0-9A-Z]{0,2}) RewriteCond %{QUERY_STRING} SELECT(=|\[|\%[0-9A-Z]{0,2}) [OR] RewriteCond %{QUERY_STRING} UNION(=|\[|\%[0-9A-Z]{0,2}) [OR] RewriteCond %{QUERY_STRING} UPDATE(=|\[|\%[0-9A-Z]{0,2}) [OR] RewriteRule ^([^.]*)/?$ index.php [L] RewriteRule ^domain/trial/cms$ index/index.php?%{QUERY_STRING} [L] RewriteCond %{HTTP:Range} ([a-z]+) [NC] RewriteRule ([0-9_\-]+)flv$ http://www.domain.com [R,L] RewriteCond %{ENV:byte-ranges-specifier} !^$ RewriteRule ([0-9_\-]+)flv$ http://www.domain.com [R,L] RewriteCond %{HTTP_USER_AGENT} !^Mozilla/5 [NC] RewriteCond %{HTTP_USER_AGENT} !^Mozilla/4 [NC] RewriteCond %{HTTP_USER_AGENT} !^Opera [NC] RewriteRule ([0-9_\-]+)flv$ http://www.domain.com [R,L] RewriteRule ^$ index/index.php?%{QUERY_STRING} [L] RewriteCond %{SCRIPT_FILENAME} !sss.php [NC] RewriteCond %{SCRIPT_FILENAME} !m-administrator [NC] RewriteRule ^([^/^.]*)$ sss.php?encrypted=$1&%{QUERY_STRING} [L] RewriteCond %{SCRIPT_FILENAME} !sss.php [NC] RewriteCond %{SCRIPT_FILENAME} !m-administrator [NC] RewriteRule ^([^/^.]*)/([^/^.]*)$ sss.php?tab=$1&page=$2&%{QUERY_STRING} [L] RewriteCond %{SCRIPT_FILENAME} !sss.php [NC] RewriteCond %{SCRIPT_FILENAME} !m-administrator [NC] RewriteRule ^([^/^.]*)/([^/^.]*)/([^.]*)$ sss.php?tab=$1&page=$2&queryString=$3&%{QUERY_STRING} [L] RewriteCond %{SCRIPT_FILENAME} !sss.php [NC] RewriteCond %{SCRIPT_FILENAME} !security.php [NC] RewriteRule ^([^/]*)$ index/$1?%{QUERY_STRING} [L] I tried to convert it by online tools such as : http://www.anilcetin.com/convert-apache-htaccess-to-nginx/ but it didn't convert it correctly. The conversion output is : if ($args ~ "mosConfig_[a-zA-Z_]{1,21}(=|%3D)"){ set $rule_0 1; } if ($args ~ "base64_encode.*(.*)"){ set $rule_0 1; } if ($args ~* "(<|%3C).*script.*(>|%3E)"){ set $rule_0 1; } if ($args ~ "GLOBALS(=|[|%[0-9A-Z]{0,2})"){ set $rule_0 1; } if ($args ~ "_REQUEST(=|[|%[0-9A-Z]{0,2})"){ set $rule_0 1; } if ($args ~ "SELECT(=|[|%[0-9A-Z]{0,2})"){ set $rule_0 1; } if ($args ~ "UNION(=|[|%[0-9A-Z]{0,2})"){ set $rule_0 1; } if ($args ~ "UPDATE(=|[|%[0-9A-Z]{0,2})"){ set $rule_0 1; } if ($rule_0 = "1"){ rewrite ^/([^.]*)/?$ /index.php last; } if ($rule_1 = ""){ rewrite ^/domain/trial/cms$ /index/index.php?$args last; } if ($http_range ~* "([a-z]+)"){ set $rule_2 1$rule_2; } if ($rule_2 = "1"){ rewrite /([0-9_-]+)flv$ http://www.domain.com redirect; } #ignored: condition 0 if ($rule_3 = "1"){ rewrite /([0-9_-]+)flv$ http://www.domain.com redirect; } if ($http_user_agent !~* "^Mozilla/5"){ set $rule_4 1$rule_4; } if ($http_user_agent !~* "^Mozilla/4"){ set $rule_4 2$rule_4; } if ($http_user_agent !~* "^Opera"){ set $rule_4 3$rule_4; } if ($rule_4 = "321"){ rewrite /([0-9_-]+)flv$ http://www.domain.com redirect; } if ($rule_5 = ""){ rewrite ^/$ /index/index.php?$args last; } if ($uri !~* "sss.php"){ set $rule_6 1$rule_6; } if ($uri !~* "m-administrator"){ set $rule_6 2$rule_6; } if ($rule_6 = "21"){ rewrite ^/([^/^.]*)$ /sss.php?encrypted=$1&$args last; } if ($uri !~* "sss.php"){ set $rule_7 1$rule_7; } if ($uri !~* "m-administrator"){ set $rule_7 2$rule_7; } if ($rule_7 = "21"){ rewrite ^/([^/^.]*)/([^/^.]*)$ /sss.php?tab=$1&page=$2&$args last; } if ($uri !~* "sss.php"){ set $rule_8 1$rule_8; } if ($uri !~* "m-administrator"){ set $rule_8 2$rule_8; } if ($rule_8 = "21"){ rewrite ^/([^/^.]*)/([^/^.]*)/([^.]*)$ /sss.php?tab=$1&page=$2&queryString=$3&$args last; } if ($uri !~* "sss.php"){ set $rule_9 1$rule_9; } if ($uri !~* "security.php"){ set $rule_9 2$rule_9; } if ($rule_9 = "21"){ rewrite ^/([^/]*)$ /index/$1?$args last; } Please help me with the proper conversion result for nginx in order to work perfectly.

    Read the article

  • Windows Sharing requires password

    - by Linux Intel
    I have 3 machines on my local network Machine A , Machine B and Machine C OS on all machines is : Windows 7 64bit. Sharing Permissions on all machines : Everyone ( Read/Write ) no domain. Sharing folder name : project Machine A is sharing folder over the network without password. Machine B is sharing folder over the network without password. Machine C is sharing folder over the network without password. Machine A can normally access B and C without password required. Machine B can normally access A and C without password required Machine C can normally access Machine B without password. My problem is *Machine C* requires a password when it access Machine A also the shared folder in Machine A don't have password protected and Machine B can access Machine A without a password ! How can i solve the problem .?

    Read the article

  • php-fpm: very high server load

    - by Derp Derpington
    Since today my webserver (nginx + php-fpm + mysql on a VPS) is very slow. htop says: 1 [|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||100.0%] Tasks: 63 total, 13 running 2 [|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||100.0%] Load average: 11.67 10.95 6.95 3 [|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||100.0%] Uptime: 00:18:40 4 [|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||100.0%] 5 [|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||100.0%] 6 [|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||100.0%] Mem[||||||||||| 137/1280MB] Swp[ 0/0MB] PID USER PRI NI VIRT RES SHR S CPU% MEM% TIME+ Command 6802 www 20 0 76232 12320 5716 R 27.0 0.9 0:06.48 php-fpm: pool www 7048 www 20 0 75200 12136 5700 R 52.0 0.9 0:03.64 php-fpm: pool www 6699 www 20 0 74176 11124 5700 R 27.0 0.8 0:07.36 php-fpm: pool www 7029 www 20 0 73668 10380 5676 R 42.0 0.8 0:03.52 php-fpm: pool www 6995 www 20 0 76228 12456 5644 R 42.0 1.0 0:03.98 php-fpm: pool www 6858 www 20 0 74172 10684 5620 R 35.0 0.8 0:05.52 php-fpm: pool www 6998 www 20 0 75200 12072 5620 R 37.0 0.9 0:03.95 php-fpm: pool www 7098 www 20 0 75200 12052 5616 R 42.0 0.9 0:02.33 php-fpm: pool www 7093 www 20 0 76228 12496 5612 R 37.0 1.0 0:03.02 php-fpm: pool www 7226 www 20 0 74692 11080 5588 R 32.0 0.8 0:00.66 php-fpm: pool www CPU: (cat /proc/cpuinfo | grep model) model : 44 model name : Intel(R) Xeon(R) CPU E5620 @ 2.40GHz model : 44 model name : Intel(R) Xeon(R) CPU E5620 @ 2.40GHz model : 44 model name : Intel(R) Xeon(R) CPU E5620 @ 2.40GHz model : 44 model name : Intel(R) Xeon(R) CPU E5620 @ 2.40GHz model : 44 model name : Intel(R) Xeon(R) CPU E5620 @ 2.40GHz model : 44 model name : Intel(R) Xeon(R) CPU E5620 @ 2.40GHz I think a load of 10 and 100% cpu usage is not normal... How can i fix that?

    Read the article

  • Can I upgrade the CPU in my Lenovo 3000 N100 laptop?

    - by Pavel
    I've got an Intel Core Duo T2300 in my laptop (Lenovo 3000 N100, 0768-49G). Here is what I could find out about it: $ sudo dmidecode # dmidecode 2.11 SMBIOS 2.4 present. 42 structures occupying 1436 bytes. Table at 0x000DC010. Handle 0x0000, DMI type 0, 24 bytes BIOS Information Vendor: LENOVO Version: 61ET37WW Release Date: 06/04/07 Address: 0xE6B70 [...] Handle 0x0002, DMI type 2, 8 bytes Base Board Information Manufacturer: LENOVO Product Name: CAPELL VALLEY(NAPA) CRB [...] Handle 0x0004, DMI type 4, 35 bytes Processor Information Socket Designation: U2E1 Type: Central Processor Family: Other Manufacturer: Intel ID: E8 06 00 00 FF FB E9 BF Version: Genuine Intel(R) CPU T2300 @ 1.66GHz Voltage: 3.3 V External Clock: 166 MHz Max Speed: 2048 MHz Current Speed: 1600 MHz Status: Populated, Enabled Upgrade: ZIF Socket L1 Cache Handle: 0x0005 L2 Cache Handle: 0x0006 L3 Cache Handle: Not Provided Serial Number: Not Specified Asset Tag: Not Specified Part Number: Not Specified $ cat /proc/cpuinfo processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 14 model name : Genuine Intel(R) CPU T2300 @ 1.66GHz stepping : 8 microcode : 0x39 cpu MHz : 1000.000 cache size : 2048 KB I believe the chipset is "Mobile Intel 945GM Express", but I don't know how to verify it on a Linux system. I'm not sure about the socket, but Intel claims "Sockets Supported: PBGA479, PPGA478". Now, I'd like to upgrade to the fastest compatible CPU available, but I'm a bit lost in all the details. Can you guys help me out with a couple of questions, please? What CPUs can I choose from? (I think it's only the Core2Duo line, but it should be enough for an upgrade) Can I use a 64-bit CPU? Can I use a CPU with a higher FSB than 667 MHz? Do I have to worry about additional cooling, or is it enough to check for similar voltage/TDP values? Thank you!

    Read the article

  • Lenovo Wi-Fi Replacement

    - by user22910
    I recently got my T500 with a very poor signal Wi-Fi, Thinkpad BGN, a Realtek chipset. I would like to replace my Wi-Fi card with either the Intel WiFi Link 5100 or 5300. However, I read somewhere that Lenovo specfically "whitelist" their Wi-Fi cards to only work with their laptops. I could not find any of the Intel Wi-Fi, moreover any Wi-Fi cards on the Lenovo site. So, I went to hunt around in Amazon and found several sellers. Plus what sort of card do I require? There is a difference between mini cards and the full sized card, though I do not know which one my laptop supports. Here are the specifications for my laptop: http://privatepaste.com/8b0537bce0 I would like to have confirmation which one of these specific cards as posted below will work on my laptop (or the one you recommend to have): Intel Wifi Link 5300 Intel WiFi Link 5100 - Network adapter - PCI Express Mini Card - 802.11b, 802.11a, 802.11g, 802.11n (draft 2.0) Intel WiFi Link 5100 - Network adapter - PCI Express Half Mini Card - 802.11b, 802.11a, 802.11g, 802.11n (draft) Intel WiFi Link 5300 - Network adapter - PCI Express Mini Card - 802.11b, 802.11a, 802.11g, 802.11n (draft)

    Read the article

  • SATA Driver for Acer Aspire One D257

    - by Robert Niestroj
    i have a Acer Aspire One D257. In this netbook the hard disk is defect so i bought a new one. Now i want to reinstall Windows 7. Im using an external DVD Drive plugged into USB. The Windows 7 DVD is staring, Win7 setup is starting and when it comes to Hard Drive options it says that no drive was detected and i should try search for drivers. It shows me this window: Screenshot from web Now i cant find the right drivers for this netbook to continue with the installation. The laptop has the newest BIOS - 1.15, it is reset to factory default settings except that i enabled the Boot Menu prompt with F12. From the Acer Support Website i've downloaded the SATA AHCI Driver and the Chipset Driver. I unpacked both to a USB flashdrive in seperate folders. When i select the SATA AHCI Driver it does not find any drivers. When i uncheck the checkbox "Hide drivers that are not compatible with hardware on this computer" it shows one driver: Acer HWID (path_to\1.inf). When i continue with this driver i got an error message that says something like: No new devices found. Check if the driver files are on the installation disk. When i show him the Chipset Driver it sees a lot more driver. When i uncheck the checkbox "Hide drivers that are not compatible with hardware on this computer" it show some drivers: Intel N10 Family DMI Bridge Intel N10/ICH7 Family PCI Express Root Port Intel N10/ICH7 SMBUS Controller Intel N10/ICH7 Family USB Universal Host Controller Intel N10/ICH7 Family USB2 Enhanced Host Controller Intel N10/ICH7 Family Interface LPC Controller When i uncheck this checkbox i get a lot more drivers, and some SATA Drivers but the also do not work. I get the same error message as before. Can someone help me find a driver that should work or am i doing anything else wrong?

    Read the article

  • How to verify system using right GPU, after system reset [duplicate]

    - by Antoros
    This question already has an answer here: Is my mobile AMD card being used? 2 answers OS: Windows 8 CPU: Intel® Core™ i7 Processor 3635QM GPU 1 : Intel HD Graphics 4000 GPU 2 : AMD Radeon™ HD 8870M other info: System Spects Problem: im unsure that CCC is using AMD card instead of Intel's, i have encountered several issues since updating to 8.1 and i don't know what to do What happened: Installed 8.1 patch first day After 1 minute of use, BBSOD, windows never loaded again System restore wouldnt recognize 8.0 restore points i did a system reset to windows 8 since the laptop was only 3 weeks old System Broke, it did restore to factory BUT kept the registry almost intact, i had to install almost everything again, since the factory drivers where working with the updated one's registry and several problems CCC Broke too <- What i've already done Installing new drivers on top of old ones didnt work, so i used AMD uninstaller first Uninstalled and Re-installed Intel's HD Graphics Driver Tried to install mobile center, but AMD told me that it wasnt compatible (even if thats the only driver that they provide via their page as seen Here) Tried to use Auto-Detect, couldnt install driver because card was disabled because it didnt have the drivers... (see what they did here?) Had to use a workaround with Samsung Update, the driver didnt appear as download so had to use search and downloaded the driver manually. Now the graphic card appears on device manager and catalyst but as 8800 series (not exact model), and cant check the card with neither dxdiag/GPU-z/HWMonitor when right-clicking on CCC only Intel card appears launching a game and using as "high performance" would speed it up a little but i cant be sure How to verify its working properly? HWMonitor wont show AMD card even when set to high performance Latest GPU-Z wont work because a problem with Intel's, and legacy ones wont either what can I do now? I don't even know if I fixed my problem or not, and i also want to to use Adobe Premier with it, and its locked (the option to run it with the amd card not intels) Edit: now it seems to work, but cant change the setting for adobe Premiere and other programs that i Need to

    Read the article

  • compiling iphone program in snow leopard wtih libsqlite3 library

    - by user360297
    Hi, I develop an iphone application which uses sqlite3 as a database. That time my OS X version was leopard. So add added libsqlite3.0.dylib to frameworks and compile without any problems it complied and with any problems I could run it on the device as well. This week I installed Snow Leopard on my Mac. Removing old Leopard version and install a fresh Snow leopard system. But my problem is now I cannot compile that program because it will give errors with sqlite3 library. I added sqlite3.0.dylib using selecting targets and then selecting file. Also tried adding selecting it from directly /Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS3.1.3.sdk/usr/lib I get two different errors when I compiled to device and to simulator when compiled to device, ld: warning: in /opt/local/lib/libsqlite3.0.dylib, file is not of required architecture* When compiled to simulator, ld: warning: in /opt/local/lib/libsqlite3.0.dylib, file was built for unsupported file format which is not the architecture being linked (i386) ld: warning: in /Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS3.1.3.sdk/usr/lib/libSystem.dylib, missing required architecture i386 in file ld: in /Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS3.1.3.sdk/usr/lib/libobjc.A.dylib, missing required architecture i386 in file Command /Developer/Platforms/iPhoneSimulator.platform/Developer/usr/bin/gcc-4.2 failed with exit code 1 i also tried with adding sqlite3.dylib (, I think sqlite3.0.dylib is linked to sqlite3.dylib.) but no luck. Could any one out there give me any help. I'm really trying to get this working. Please let me if you want more details. Thank you, Waruna

    Read the article

  • How to deal with forward declaration / #import in Cocoa Touch (Objective-C cross C++) correctly?

    - by unknownthreat
    I am trying to write this header file: //@class AQPlayer; //#import "AQPlayer.h" @interface AQ_PWN_iPhoneViewController : UIViewController { AQPlayer* player; } @end AQPlayer is a .mm file written in C++. I tried to make a class forward declaration here, but it complains to me: error: cannot find interface declaration for 'AQPlayer' So I tried to "#import" the header file instead, but it complains something completely off and weird. Here's a slice of the error complained: In file included from /Users/akaraphan/Desktop/SpecialTopic1/AQ_PWN_iPhone/Classes/AQPlayer.h:51, from /Users/akaraphan/Desktop/SpecialTopic1/AQ_PWN_iPhone/Classes/AQ_PWN_iPhoneViewController.h:12, from /Users/akaraphan/Desktop/SpecialTopic1/AQ_PWN_iPhone/Classes/AQ_PWN_iPhoneAppDelegate.m:10: /Developer/Examples/CoreAudio/PublicUtility/CAStreamBasicDescription.h:78: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'CAStreamBasicDescription' /Developer/Examples/CoreAudio/PublicUtility/CAStreamBasicDescription.h:230: error: expected '=', ',', ';', 'asm' or '__attribute__' before '<' token /Developer/Examples/CoreAudio/PublicUtility/CAStreamBasicDescription.h:231: error: expected '=', ',', ';', 'asm' or '__attribute__' before '==' token /Developer/Examples/CoreAudio/PublicUtility/CAStreamBasicDescription.h:233: error: expected '=', ',', ';', 'asm' or '__attribute__' before '!=' token /Developer/Examples/CoreAudio/PublicUtility/CAStreamBasicDescription.h:234: error: expected '=', ',', ';', 'asm' or '__attribute__' before '<=' token /Developer/Examples/CoreAudio/PublicUtility/CAStreamBasicDescription.h:235: error: expected '=', ',', ';', 'asm' or '__attribute__' before '>=' token /Developer/Examples/CoreAudio/PublicUtility/CAStreamBasicDescription.h:236: error: expected '=', ',', ';', 'asm' or '__attribute__' before '>' token /Developer/Examples/CoreAudio/PublicUtility/CAStreamBasicDescription.h:239: error: expected ';', ',' or ')' before '&' token Am I missing something? Can't I do a forward declaration for this?

    Read the article

< Previous Page | 106 107 108 109 110 111 112 113 114 115 116 117  | Next Page >