Search Results

Search found 4296 results on 172 pages for 'serial ports'.

Page 110/172 | < Previous Page | 106 107 108 109 110 111 112 113 114 115 116 117  | Next Page >

• WD Elements Desktop External - Not recognised on a single computer

  - by Aelexe

  My WD Elements Desktop External is no longer recognised on my main computer. It has worked fine in the past, but now all of a sudden is not detected. It does not prompt when plugged in, nor does it show up in the disc management interface or the device manager. It appears to be aware that it is plugged in however as the light on the external blinks rapidly for a short while after being plugged in. The strangest thing however is that it works fine on other computers, including my family computers and my laptop. I have attempted to troubleshoot the issue by trying various USB devices in multiple ports on each system to see if there is any correlation with the issue, but have come up with nothing that gives me an idea of what is going on. I have also attempted to format the external using my laptop, but that has not helped either. If anyone has had a similar issue, or knows of any potential solutions, please post your advice. Thanks for your time.

  Read the article

• access server from blocked machine

  - by user40994

  I want to access my Linux server(vnc) from a distant machine which has most ports blocked with the exception of 21, 25, 80, 135, and 445. So, I would like to know if theres a way to communicate with my vnc server on the server, while using an available port on client. i.e. port 25 So I think essentially I need the serverside router to forward packets coming in on port 25 to linux server machine(servername, p5900), which should forward them on to itself on port 5900. And when transmitting, I need the server OR to router to send out packets changing their port to 25. Im totally lost on how to acheive this. Please help(much appreciated). Thanks I do not use smtp.

  Read the article

• What is your approach to draw a representation of your network ?

  - by Kartoch

  Hello, I'm looking to the community to see how people are drawing their networks, i.e. using symbols to represent complex topology. You can have hardware approach, where every hardware unit are represented. You can also have "entity" approach, where each "service" is shown. Both are interesting but it is difficult to have both on the same schema (but this is needed, especially using virtualization environment). Furthermore, it is difficult to have complex informations on such representation. For instance security parameters (encrypted link, need for authentication) or specific details (protocol type, ports, encapsulation). So my question is: where your are drawing a representation of your network, what is your approach ? Are you using methodology and/or specific softwares ? What is your recommendations for information to put (or not) ? How to deal with the complexity when the network becomes large and/or you want to put a lot of information on it ? Examples and links to good references will be appreciated.

  Read the article

• Setting up linux server with multiple access rights

  - by Mark

  I am a graduate student and want to set up a linux server (preferably Ubuntu) in my office. I also want to give my friends SSH access to that box. My question is can I set up my server such that I can give one of my friends rights to install software on my machine but he cannot brows around outside the directory he is allowed to? Can I set up multiple apache instances (on different ports) for different people? so each has access to their own apache instance?

  Read the article

• DNS for route between WAN & LAN

  - by David Maitland

  I have a few machines set up on my internal 192.168.1.* network and i have one public ip, my router is links all ports to on internal linux machine on my network 192.168.1.3. I want to know how to configure the DNS server on my linux box to forward to internal LAN ip's depending on the host name. EG. computer4.83.22.56.12 would find my box then forward to 192.168.1.4 on the local network. This is so i can run multiple web server under one ip. btw, i use Ubuntu. Thanks Dave

  Read the article

• D Link DSL G624T Router will work wirelessly but not via cable

  - by Andy Fensome

  I have a D Link router which works in providing a wireless internet connection for my main PC and secondary notebook. I have been advised that the internet connection to the main pc will be better if I wire the router directly to the PC. I have tried this and can not get a connection. I just keep getting the message network cable unplugged. I have had the ethernet adaptor checked out on the pc and the cable is good ( also checked out). Anything I can do or do I have a bad router. I have tried the cable in all 4 ports and the message is still the same.

  Read the article

• Can Camel Jetty proxy URL share the webapplication context

  - by user1750353

  I am struggling with Camel Jetty Proxy Routes. At times, the routes exhibits inconsistent behavior. My Proxy app deployed with context root "Proxy", however, if give that as the context path for my proxy URL I get service not found error. If change the Proxy to an arbitrary context such as "Dummy" then the route works. Is that how camel jetty component works? From Path: jetty:http://0.0.0.0:6080/Proxy/PurchaseOrder/?matchOnUriPrefix=true&disableStreamCache=true&traceEnabled=true To Path: jetty:http://localhost:7001/Provider/PurchaseOrder/?bridgeEndpoint=true&throwExceptionOnFailure=false Another issue i noticed with jetty is If deploy both Proxy and Provider on the same app container(same listening port), then the route completely stops working saying "Provider/PurchaseOrder/" service not found. The only way the routes work is, both routes have to run different ports and the from route shouldn't share the webcontext path. I have requirement that if required I should be a able run both Proxy and Provider on the same container. Any help appreciated. Thanks,

  Read the article

• How to change the setting for a network device reported by ethtool, specifically Speed, on VM?

  - by Ramadheer Singh

  This is related to these two questions, although they don't answer my question. The machines are RHEL6. 1.ethtool not showing all the properties 2.changing network speed to 1000Mb/s Output on VM: [root@foo ~]# ethtool eth0 Settings for eth0: Current message level: 0x00000007 (7) Link detected: yes Output on Real Hardware: (interested in Speed) # ethtool eth0 Settings for eth0: Supported ports: [ TP ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Supports auto-negotiation: Yes Advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Advertised auto-negotiation: Yes ***Speed: 1000Mb/s*** Duplex: Full Port: Twisted Pair PHYAD: 1 Transceiver: internal Auto-negotiation: on Supports Wake-on: d Wake-on: d Link detected: yes if there's anyway I can set this in VM, please suggest.

  Read the article

• Smoothwall: How to stop live network traffic displayed in terminal?

  - by Jakobud

  For our network we are working on building a new firewall box and we just installed Smoothwall on it to test it out. When I start up the box, before the login prompt even appears, all of the live IP traffic is appearing in the terminal (source/destination IPs, MACs, Ports, etc). I wait for the boot sequence to finish, but all I see is this IP traffic. The login prompt never comes up. I finally get sick of waiting and press CTRL + C and it says "Entering Run Level 3" and then I get a login prompt finally. Once I login, the IP traffic continues to fly through the terminal even as I'm trying to type commands. How do I turn this stuff off? Is this the default setting for Smoothwall to have all this IP traffic going by on the screen? It essentially renders using the terminal to being useless.

  Read the article

• Allow Internet Access with Default Gateway on Windows 7 VPN Server

  - by Hakoda

  I have a Windows 7 box at home (which I'll refer to as Home-VPN) that runs a simple PPTP VPN server. I have a range of 2 IP address (192.168.1.10-192.168.1.11) to give out, although the server is only able to give out one concurrent connection. Ports 1723 & 47 are correctly forwarded to the server. IPv6 is disabled on both Home-VPN and the client. I setup Home-VPN just like this Youtube video: http://www.youtube.com/watch?v=1s5JxMG06L4 I can connect to it just fine but I can't access the Internet when connected to Home-VPN, all outside web servers (eg. google.com, mozilla.org, apple.com) are unreachable. I know I can uncheck "Use Default Gateway on Remote Servers" on the client side under IPv4 settings but that will route all my traffic through my current connection, rather than through the VPN, defeating the purpose of said VPN. Any ideas on how I can fix this?

  Read the article

• Is there a feature in Nagios that allows Memory between checks?

  - by Kyle Brandt

  There are various instances where there are values I want to monitor with Nagios, and I don't care as much about the value itself, but rather how it compares to the previous value. For instance, I wrote one to check the fail counters in OpenVZ. In this case, I didn't care about the value that much, but rather I cared if the value increased. Another example might be switch ports, I would be most interested to get alerted about the change of state of a port (Although perhaps a trap would be better for this one). For my OpenVZ script, I used a temp file, but I am wondering if there is a better way? Maybe Nagios has some variables that plugins (check scripts) can access that are persistent across checks?

  Read the article

• What's the best multiple monitor setup I can buy for $500 and a macbook?

  - by kevinburke

  I've got a 13' white MacBook from 2008 and I'd like to run one or two external monitors, my budget is $500. I've tried to do research and this is what I was going to get - will these work OK? Two Diamond BVU195 HD USB Display Adapters (DVI and VGA with included DVI to VGA adapter) to plug into the USB port Two Dell ST2310 monitors One external USB hub so I don't use up both of my USB ports Will this work? I've read some people say it does and some people say it doesn't, but I don't know enough to say either way. Also do you have recommendations for a better monitor than the dell sd2310? what's the best setup I can buy for $500? Thanks very much for your help, Kevin

  Read the article

• Any way to tell apart a CPU defect from a mainboard defect?

  - by Pekka

  I have a fairly modern desktop computer, an AMD Athlon II X2 based silent PC, that does not work. When turned on, it will start physically (all fans are rotating, disks start up...) but not give a signal on any of the graphics ports (DVI, VGA, and HDMI, I tried all three). Also, the reset button does not seem to have any effect. I have stripped the mainboard bare of all SATA connections, extension cards, and the one 2GB RAM chip to eliminate them as the problem source, but to no avail, so I think it's fair to assume it's either the mainboard or the processor that are at fault. However, I have neither a replacement mainboard, nor a replacement processor handy to identify which one is broken. The cause of the defect is unknown, so for all I know, it could be both. Therefore, I'm reluctant to buy replacement hardware blindly before knowing more. Is there any way to further diagnose (or at least get some indication) which component is broken without buying replacement hardware?

  Read the article

• have 2 exchange servers to communicate together!

  - by Data-Base

  we have our exchange server 2007 (10.10.2.11) at work with domain "dddddd.com" and ironport and it work just fine! we need to test some thing at work with Exchange 2010 !! so we came up with this idea: we created a locked network and install firewall (10.10.2.88) the locked network has it's own DC and Exchange servers! we used the domain "dddddd.loc" any way it will be deleted! IPs DC 10.0.0.1 EX 10.0.0.11 now the Exchange server up and running in the firewall (10.10.2.88) we opened the ports and forwarded it to the Exchange2010 (10.0.0.11) in our main DC we defined the zone dddddd.loc to the firewall and the MX records as well but when we test we get error now how to make it so that the 2010 will send email directly to the 2007 (we will not use it to more that that)? and the 2007 will send the email to 2010 if the email has the domain dddddd.loc ?

  Read the article

• Selectively routing traffic via ethernet or wifi, with proper DNS (Mac OS X 10.6)

  - by Dan

  When I'm at work, I access various intranet pages as well as the wider Internet through ethernet. However, the company LAN blocks some ports (e.g. Google Calendar). I can get to those through WiFi. So, I gave the Airport priority, and then using route add, I set up selective routing: all intranet traffic goes through the ethernet and everything else via WiFi: sudo route add 10.0.0.0/8 <intranet gateway>. However, there are a number of intranet sites that have their own DNS; i.e., hr.company.com only resolves on the intranet. The only way that I can get the DNS to work properly is to add the internal DNS server to the Airport DNS listing, however I fear that when I go elsewhere and forget, this will break things. What's the right way to get the DNS to resolve using this setup?

  Read the article

• Linux QoS (Skype / BitTorent / SIP / HTTP priority)

  - by Andre

  We are configuring a linux box that will act as internet gateway for an office of 30-50 computers. We are using iptables/HTB for traffic shaping. Is there a way to match traffic on L7 level? It's easy to identify traffic by TCP/UDP ports (like SIP and HTTP). But what if we are dealing with Skype & BitTorent? It was surprise for me that there is no powerful and matured sulution for tasks like this. I found only l7-filter (http://l7-filter.clearfoundation.com/) patch for the Linux kernel, but it's no longer supported (it seems to). Moreover it couldn't be compiled with modern Linux kernels. The only option I found was to use a Cisco router. Are there other ways to identify and shape Skype and Bittorent traffic?

  Read the article

• PNY ExpressCard SATA II 2-port card - drivers?

  - by stewartwb

  I bought a couple of PNY eSATA cards for notebook computers, model P-NSA2-EC-RF. I mistakenly thought that they would be a bit more plug-and-play, like cards that supply USB or Firewire ports. They did not ship with the Driver CD, and the drivers I found on the PNY web site didn't work. I've emailed their support group, but we all know how likely it is that they will respond before the end of the decade. Does anyone have a driver disc handy for this model card, or know where I might download a driver ISO? (Dell XPS M1330 laptop running Windows 7 x64 and sometimes Windows 7 x86)

  Read the article

• How can I force certain applications to use specific network connections?

  - by snicker

  Let's say I have two active network connections that let me out to the internet. I want certain applications to only use Network Connection 1, while some others should use Network Connection 2. Is this possible in Windows XP? If so, how can it be done? The main reason I wish to do this is I want to use a tethered phone's network for certain applications and an ethernet connection for others. Certain ports and networks are blocked by the ethernet connection, whereas they are not on my tethered phones connection.

  Read the article

• GeForce GT 430 with 1 VGA port and 1 HDMI port can support dual monitor?

  - by Tendou Kishi

  This question is similar to 3 Monitors, 1 graphics card but with different video card. It has the same ports as GT 120 in that question. Would it support dual monitor? I don't need 3 monitors. Just 2 is good. Checked GeForce GT 430 Specs but have no idea whether it will support or not. While on it, can somebody explain how to know whether a graphics card support multiple display from such information?

  Read the article

• What is the best way to get the external internet gateway IP reported periodically?

  - by basilmir

  I have a OS X Server behind an airport extreme, serving services via opened ports on the airport. The server has a 10.0.x.x local address, always the same one. The airport extreme gets it's external IP address via PPPoE, and sometimes... once a week it changes. For security reasons WE ACTUALLY like this behavior. But i need a way to know the external IP address just in case i need to connect and do something to the server while on the outside. What can i do?

  Read the article

• Cannot send email from EC2 instance on port 587

  - by Tahsin Mostafiz

  I have written a mail service for our flask application that uses Celery and RabbitMQ to send emails (using gmail). I have got the celery consumer and producer communicating okay but I cannot get to send send emails. I am getting a socket.error: [Errno 101] Network is unreachable. I think this means that AWS is blocking port 587 - even though in my security group I opened both ports 587 and 25 (inbound and outbound). Any reason why this is happening? Any help will be highly appreciated.

  Read the article

• pfSense router gives DNS rebinding warning when accessing subdomains

  - by Richard Maddis

  I have just set up a router running pfSense on our network and forwarded the appropriate ports. I have a small web server running in my network, and a domain name pointing to our (WAN) IP. When accessing that domain name, everything works fine. However, when accessing a subdomain of the domain name, pfSense will give a DNS rebinding warning. This did not happen back when I used a DD-WRT router. What is the proper way to fix this? The DNS records for the subdomain also point to the same address (I use a virtual server to differentiate the subdomains.)

  Read the article

• Windows 2003 Server Suddenly Drops Connections to everything but PING and port 80 (webserver)

  - by Urda

  Hi, I'm running a Windows 2003 Dedicated server, and the box has been rock solid for more than 2 years now. Just recently, I have had an issue where after a certain ammount of time the server will just stop accepting connections on all ports except 80, and still responds to pings. If you surf to a static HTML page on the box, you can display it. If you pull up a PHP file that has an outside database connection, it fails. RDP refuses to connect, and LogMeIn reports that "The connection was reset" The only fix at this time is to have the provider physically reboot my box to correct the issue. The event log doesn't seem to be leaving helpful messages, and I am at a lost to what is causing this error since I have not installed any new software in months on it. Any tips or help would be appreciated to tracking down this issue. I don't mind updating the question as responses come in, I just do not know where to start troubleshooting because it seems random at this time.

  Read the article

• Lighttpd based server issues crop up when port forwarding

  - by michael

  I have four host computers running lighttpd webservers. they are sitting behind a hspa modem, which each occupying a http port between [81 - 84]. 80 is taken by the modem itself. The port forwarding is setup correctly, however, only a portion of any webpage I request from any of the hosts comes through (they all fails after %20 of the page). If I put the host on port 81 into the dmz, it serves pages fine. The others do not respond to the dmz treatment. Is it possible the web content on the hosts somehow require ports aside from their respective http port? Or is it possible that even though the server.port in the lighttpd_ssl.conf file is set, the individual hosts are still expecting to serve on port 80? I am not familiar with lighttpd, nor did i set them up. they are running on video encoders i purchased. I can grab any files from them required for further information on the problem.

  Read the article

• Device that connects to a switch via RJ45, that emulates a PC

  - by Mike Christiansen

  One of my co-workers once saw a device that plugged into a RJ45 jack, that emulated a PC. It could be configured with an IP address, and respond to pings. I was wondering if anyone knew about these, or even what they are called? This will be used to simulate a PC in a classroom environment. Thanks in advance. Edit: This is a CCNA classroom, we are looking to simulate a PC connected to an ethernet port on a router. These will be on different subnets, etc. This might be doable with a VM through VLANs and virtual switches, but then we are getting away from configuring the physical ports on the router the way we want to.

  Read the article

< Previous Page | 106 107 108 109 110 111 112 113 114 115 116 117  | Next Page >