Search Results

Search found 30252 results on 1211 pages for 'network programming'.

Page 1102/1211 | < Previous Page | 1098 1099 1100 1101 1102 1103 1104 1105 1106 1107 1108 1109  | Next Page >

• Cloning a NAS drive which hosts a SQL Server DB

  - by Adrian Hand

  We have a system in the field running a server application which is suffering with major performance issues. The system in question has 2 onboard 300gb sas drives in RAID 5 from which it boots Windows Server 2003, and a 6tb buffalo terastation NAS unit (also RAID 5) to which the server app does all of its reading and writing. I believe the terastation is the source of all our woes. Whilst under load, reads and writes tick by at something of the order of 1meg/sec, though the network in question is hardly utilised. The terastation contains various data, but crucially hosts a full instance worth of SQL Server .mdf and .ldf files (master etc - the whole shooting match) I wish to stop all the services on the server, then take everything on the terastation and essentially clone it to some alternative onboard storage, so as to eliminate the terastation from the equation as far as poor performance is concerned. ie the terastation is currently drive D: - I want to copy everything off and then have the duplicate assume the drive letter so that as far as the software is aware, nothing is different. This is tricky because of the mdf and ldf files - everything else will work with a straight up file copy. Can anyone suggest a means to achieve what I am describing? Many thanks!

  Read the article

• Access node.js local server though mobile via same shared wifi

  - by laggingreflex

  EDIT: I was stuck in this situation before but then it was Apache-related But this time I'm using NodeJS, so the old answer doesn't help. I'm running apache a NodeJS webserver (on port 80) on Windows 7. I want to access the webserver through my mobile which shares the wifi router with my pc locally. http://localhost works from PC. But I can't access http://192.168.1.4 from either my phone or even my computer. ipconfig /all on my computer lists my ip address as 192.168.1.4 Wireless LAN adapter Wireless Network Connection: IPv4 Address. . . . . . . . . . . : 192.168.1.4(Preferred) I can ping my phone's (internal) ip address [192.168.1.5] from PC and vice-versa, I can ping my PC [192.168.1.4] from my phone. So why can't I access http://192.168.1.4 from my phone? (or PC) Firewall is off.

  Read the article

• New SBS 2011 installation (not migration) in an existing 2008 R2 domain

  - by Tong Wang

  My current network setup has two servers: a Windows 2008 R2 with TMG 2010 as edge firewall (TMG server), a second 2008 R2 with DC, DNS and Hyper-V roles (DCDNS server). I was trying to install SBS 2011 as a child partition on DCDNS, first I installed SBS 2011 in English and did the migration successfully. However, later on, I found that I can't change the display language in SBS 2011 once it's installed (but the clients require a different language), so I had to re-install the SBS in a different language. It is during the re-installation that the problem came up: the migration can't be completed with some error message stating "can't access the source server". I re-ran the migration preparation tool, but it didn't make any difference. I wonder if it's because the source server can only be "migrated" once. Since I only need to setup a handful of users and computers, so I decided to do a new install of SBS and picked a different domain name. But I can't get the SBS to connect to LAN: it can't ping other servers, neither can other servers ping the SBS server. I've tried to stop the DC/DNS services on DCDNS and restart SBS, but with no difference. Anyone has idea how to fix this problem?

  Read the article

• MS Excel and Access - which is better for reports?

  - by Nat

  Where I work, staff have just started to use a basic table in excel (1 october) to record sales which has about 10 columns (name, client, renewed, discount, paid etc). I record the data (total sold etc) every hour and email it to the manager. Each staff has the their own file on the network which they use constantly for that day (eg. John 08-10.xlsx; John 09-10.xlsx etc) and have been told to save the file after they complete a row with client data. I can see the file (in read only mode) to update the report but I am sure there must be a way of doing an autoupdate of their worksheets in real time. I can link worksheets and workbooks to my main workbook but manually. Does anyone have suggestions on have to do this on Excel? Or would Access allow me to make a report which shows the sales total for that hour without the staff closing the file or constantly clicking save every few minutes? We use office 2010. thanks

  Read the article

• Is there a faster way to change default apps associated with file types on OS X?

  - by Lri

  Is there anything more convenient than using RCDefaultApp or Magic Launch, or just repeatedly pressing the Change All buttons in Finder's information panels? I thought about writing a shell script that would modify the CFBundleDocumentTypes arrays in Info.plist files. But each app has multiple keys (sometimes an icon) that would need to be changed. lsregister can't be used to make specific modifications to the Launch Services database. $ `locate lsregister` -h lsregister: [OPTIONS] [ <path>... ] [ -apps <domain>[,domain]... ] [ -libs <domain>[,domain]... ] [ -all <domain>[,domain]... ] Paths are searched for applications to register with the Launch Service database. Valid domains are "system", "local", "network" and "user". Domains can also be specified using only the first letter. -kill Reset the Launch Services database before doing anything else -seed If database isn't seeded, scan default locations for applications and libraries to register -lint Print information about plist errors while registering bundles -convert Register apps found in older LS database files -lazy n Sleep for n seconds before registering/scanning -r Recursive directory scan, do not recurse into packages or invisible directories -R Recursive directory scan, descending into packages and invisible directories -f force-update registration even if mod date is unchanged -u unregister instead of register -v Display progress information -dump Display full database contents after registration -h Display this help

  Read the article

• AFP/SSH stopped working on OS X Server

  - by churnd

  I have 3 Mac OS X servers all bound to AD, all configured in the Golden Triangle setup. All 3 are completely separate from each other in terms of services, but all reside on the same internal network and are all bound to the same Active Directory domain. Two are 10.5.x (latest updates) and one is 10.6.3. Last weekend, all 3 simultaneously stopped allowing Active Directory users access to certain services, specifically AFP & SSH. SMB still works fine on all 3. I asked the AD admin if anything changed, and he said "Yes, we made a change to user accounts to toughen up security", and suggested I use [email protected] instead of just username. This still didn't work. I have completely removed one of my servers from AD, and re-joined, but this didn't work either. I can do kinit from command line and get a Kerberos ticket. sudo klist -ke shows all services are configured to use the correct Kerberos principles. I have been scavenging the logs for any useful info. The AFP log just shows that I'm connecting and disconnecting. The DirectoryService.log shows stuff about misconfigured Kerberos hashes, but my research is showing that's not uncommon. /var/log/system.log isn't showing anything useful that I can see. I'm not sure where to go from here. Any help/ideas appreciated.

  Read the article

• which vista services can be disabled with impunity?

  - by GwenKillerby

  I use Vista on a HP pavilion DV2 laptop. When I look through all the services my laptop starts, it really seems there's way too much of it. I multi boot with XP and 7. Both startup in 40 seconds. Vista takes four minutes. Is there some software that can determine which services I don't need? On 7, there's no propietary HP stuff at all, yet it seems to run fine. Because all these service, there's a LOT of them and some just sit there doing nothing, monitoring for updates I don't really need or want or need to know about the second they're available. my laptop is the only computer i use at home, there's no home network, aside from the modem-router, which is cabled, not wifi. Take for instance Parental controls, and stuff for people with bad eyesight, Tablet PC. I really never use any of that stuff. Hope this question is specific enough. I've looked at the other questions but they didn't answer me. thanks, Gwen.

  Read the article

• PowerConnect 3548p SNTP and web interface not working

  - by Force Flow

  I have been unable to get SNTP and access to the web interface working properly on a Dell PowerConnect 3548p. In the logs, this message appears over and over again: 04-Jan-2000 20:19:29 :%MNGINF-W-ACL: Management ACL drop packet received on interface Vlan 172 from 172.17.0.3 to 172.18.0.10 protocol 17 service Snmp 172 is the management vlan. 172.17.0.3 is the DNS server 172.18.0.10 is the switch's IP address. The DNS server and the switch are located on different subnets and separated by routers. I am unable to access the web interface of the switch from the 172.17.x.x subnet. I can only access the web interface of the switch if I am accessing it from the 172.18.x.x subnet. There is also a managed linksys switch on the 172.18.x.x subnet on the 172 vlan, which has no problem with SNTP. I can also access it from the 172.17.x.x network. So, it stands to reason that this is not a firewall or routing issue, but with the 3548p switch. I suspect the issue is with management permissions/ACLs on the 3348p switch, but that's about as much as I've been able to determine so far. Any ideas?

  Read the article

• Roaming Profiles & Redirected Folders - storage consumption? offline files and caching?

  - by Ben Swinburne

  I understand the concepts of both roaming profiles and folder redirection and have used both separately before. I am about to set up a network from scratch and would ideally like to use both for the following reasons primarily Roaming profiles allow users to log on to any machine and have their profile Redirected profiles allow users to have their My Documents and Desktop etc backed up without the need to log off at the end of the day. The servers can run their backups overnight and there are no missing files due to the user not logging off. Redirected profiles largely alleviate the slow log in times caused by large profiles. My question is if some of the folders are redirected and therefore not part of the roaming profile what happens on machines which truly roam (i.e. laptops)? If there's offline files or a cache does this mean that the problem whereby a user has to log off comes back? By having them both enabled, is there any duplication i.e. if I have a users$ share and a profiles$ share would I have Desktop twice for example?

  Read the article

• WiFi & GbE Slow while Both Active.

  - by Mark Tomlin

  I'm having a problem with my WiFi network connection when I use my wired GbE connection concurrently on my Laptop. I'm using my WiFi for Internet access, and general web surfing and I'm using my GbE connection to connect to my PlayStation so I can stream media. The WiFi connection is via a Linksys 610N connected to my Cable Modem. Where as the GbE connection is a direct connection from my Ethernet port to the Ethernet port of the PS3 via a Cat-5 cable (no router in between this connection). As soon as I connect the cable from the PS3 to my Ethernet port on my Laptop the WiFi connection slows to a halt, but then allows for a connection to the web as normal but at much slower speeds for the things like BitTorrent that stops completely. It seems to me that Windows can't handle both connections at once. It will have both active but it can only accept and send packets on one device at one time. I can get WiFi connections to work to go to websites and the like, but once I use my GbE connection to share media between my Laptop and my PS3 the Wifi connection dies out and I no longer have access to the internet. I setup my connection on the PS3 and the Laptop following the insturctions posted here: http://forums.finalgear.com/problems/s14e01-ps3-size-problem-40642/#post1188132 And the following is the results of my ipconfig. Windows IP Configuration Host Name . . . . . . . . . . . . : dygear Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No Ethernet adapter WiFi: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Intel(R) PRO/Wireless 3945ABG Network Connection Physical Address. . . . . . . . . : 00-19-**-**-**-** Dhcp Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IP Address. . . . . . . . . . . . : 192.168.1.111 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.1.1 DHCP Server . . . . . . . . . . . : 192.168.1.1 DNS Servers . . . . . . . . . . . : 192.168.1.1 167.206.254.2 167.206.254.1 Lease Obtained. . . . . . . . . . : Wednesday, May 19, 2010 08:55:30 Lease Expires . . . . . . . . . . : Thursday, May 20, 2010 08:55:30 Ethernet adapter LAN: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Broadcom NetXtreme Gigabit Ethernet Physical Address. . . . . . . . . : 00-16-**-**-**-** Dhcp Enabled. . . . . . . . . . . : No IP Address. . . . . . . . . . . . : 192.168.1.50 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : Any ideas?

  Read the article

• netlogon errors

  - by rorr

  I have two instances of mssql 2005 and am using CA XOSoft replication. The master is a failover cluster and the replica is a standalone server. They are all running Server 2003 sp2 x64. Same patch levels on all servers. This setup has worked great for several months until we recently restricted the RPC ports on both nodes of the master(5000 - 6000 using rpccfg.exe). We have to implement egress filtering, thus the limiting of the ports. We began receiving login errors for sql windows authentication and NETLOGON Event ID: 5719: This computer was not able to set up a secure session with a domain controller in domain due to the following: Not enough storage is available to process this command. This may lead to authentication problems. Make sure that this computer is connected to the network. If the problem persists, please contact your domain administrator. We also see group policies failing to update and cluster file shares go offline at the same time. The RPC ports were set back to default when we started seeing these problems and the servers rebooted, but the problems persist. The domain controllers are not showing any errors. Running dcdiag and netdiag shows everything is fine. We have noticed that the XOSoft service ws_rep.exe is using a lot of handles(8 - 9k), about the same number that sqlserver is using. As soon as xosoft replication is stopped the login errors cease and everything functions correctly. I have opened a ticket with CA for XOSoft, but I'm not sure that the problem is actually xosoft, but that it is the one bringing the problem to light. I'm looking for tips on debugging RPC problems. Specifically on limiting the ports and then reverting the changes.

  Read the article

• High latency due to non-presence of a transit provider in my country

  - by nixnotwin

  My ISP, a state owned incumbent, buys bandwidth from different transit providers. Whenever it buys transits it announces only a specific prefix (in most cases a hitherto unused) through the new transit AS. For e.g. if it runs out of bandwidth, it buys bandwidth from a new transit and announces a new prefix through it, while the same prefix is not announced (or announced with lowest metrics, so that the routes are very rarely used) via the old transits which continue to provide bandwidth to it. I am a business customer, so I have a fiber based link to the ISP and a tiny subnet is given to me. The subnet which is provide to me is part of a prefix which is announced by the AS of a transit who, it seems, do not have a presence in my country. So when I do a trace the packets, when they leave my ISP's AS, they take about 275ms to reach the transit providers core router, which is located in USA (half the world away). Also for upstream traffic my ISP uses a transit provider (tier 1) who has a presence in my country. But the return path is always through the transit which is in USA. So, average latency is 400ms. All the users of other ISPs in my country discover my subnet via USA. Even the traffic from neighboring countries, from Europe (which is much nearer) follows the path via USA. Sites using CDNs also resolve to ips in USA. I have informed the ISP NOC about the issue and I have asked them to provide an ip subnet belonging to a prefix announced by a local transit (preferably a tier 1 transit provider) and I am waiting for a reply. My question: Is it a serious issue that I must follow up to get it resolved? When I compared the latency on other providers in my country, it is, in most cases, less than half of my ISPs latency. Why my ISP doesn't announce all its prefixes to all of its transit providers, so that the packets can take efficient and nearest routes to reach prefixes that originate within its network?

  Read the article

• Slow browsing through IE on Windows Server 2012

  - by Volodymyr

  We've run into strange issue on the freshly installed servers. H/W: IBM server X3550 M4 7914; OS: Windows Server 2012 Std. Then we try to browse on the servers thru IE, not all sites are opened or it takes too long time to open the page, i.e. very few of them can be opened. Local FW are disabled. Servers are in a new subnet and traffic is allowed for it. VLAN is configured properly Another Windows Server 2012 host is running OK and Internet access works fine, but it is VM running on Hyper-V 2012. No proxy is used on the network. At the same time, if one tries to establish telnet session to any site on 80/443 ports - it does work. Google works as well. I've tried to configure single Qlogic adapter to check if the issue remains - it does. Teaming is configured with the means of QLogic, not by built-in functionality. IE Enhanced Security is disabled. IE settings were reset, more than once. Why would certain sites work while others not - Idk. I also tried to disable ecncapability and restart server - no luck netsh int tcp set global ecncapability=disabled Any thoughts? UPD1 VMQ is disabled. Servers are not running Hyper-V. UPD2 Servers were rebuilt from scratch, got a mail a few mins ago. Issue still remains. Teaming is now configured with the means of Windows Server 2012.

  Read the article

• Weirdly high ping on direct ethernet connection?

  - by Antriel

  I bought new Lenovo IdeaCentre H430 pc and I'm having problem with high pings. Windows 7 with on-board realtek NIC. Fresh install, fully updated, drivers installed from included CD. When I start pinging router (direct 1Gb ethernet connection, 1 hop), pings start at <1ms (which is fine) and after a while they jump to 300-1000ms. I loaded up live ubuntu to test if the problem might be in HW. It's not, in ubuntu pings were always <1ms. I also noticed that when I start using connection somehow, pings go down to 1ms, but go back up when I stop using it (tested by accessing live camera feed on LAN). Power Options set to max performance. I disabled Interrupt Moderation on the NIC, didn't help. I tested it in the safe mode with networking, same problem there. It slows down our client-server based programs and I have no idea what's causing it. All I could google up was that disabling Interrupt Moderation would help, it didn't though. Anyone had similar problems? tl;nr: Computer is giving high pings to router when idle and normal pings when network is under load, it slows down our software significantly.

  Read the article

• Sync desktop Mac environment to laptop

  - by Andrew Vit

  I spend the majority of my time working at my desktop Mac, which I have configured for my web development environment. My spouse has a MacBook for casual use, and I occasionally steal it back when I need to work off-site, or when travelling. The question is how to best synchronize the two so I can switch between them more readily. I've solved a few obvious things by using online services: Email is hosted on IMAP. Working files are in Dropbox. Source code is managed in git. However, the following are things I always miss when jumping on the laptop: Installed Applications (current versions) Installed libraries & utilities (/usr/local) Apache VirtualHosts & other configurations (/etc) Disk image files for VMs My current method is to connect the MacBook via Firewire target mode and rsync the /Users/me home directory, and then cherry-pick the other items I need from Applications, /etc and /usr/local. The problem with this method is that it can be very time consuming due to things like my virtual machine image files, cached emails, etc. How can I make this faster & easier? Can you recommend a solution for configuration management (so I can repeatably install & configure the same software on both), or synchronization (so I can bring the MacBook up to date nightly, over our home network)?

  Read the article

• Connect to Apache times out randomly

  - by Amadan

  We are trying to set up an Apache server on a remote machine, but we experience strange behaviour. Checking with telnet remote.machine 80, one of these things happen randomly: Connect and serve content normally (no delay) Connect after a long pause Connect normally, then time out without response Timeout on connect Once connected, the request seems to be processed normally. These things do not occur if I connect from that machine directly to localhost 80. The Apache is dedicated, as is the server it runs on (runs only this one application, no-one else is using it for anything else). I am not an administrator of the remote site, and I do not know the network architecture over there, but apparently it's firewalled: (HTTP port is open, SSH port is IP-restricted, most others are closed). If there was any one pattern, I might have some ideas, but this variety of symptoms baffles me. Any ideas as to what could be causing this? Apache is 2.2; Server version is: Linux version 2.6.9-22.ELsmp ([email protected]) (gcc version 3.4.4 20050721 (Red Hat 3.4.4-2)) #1 SMP Mon Sep 19 18:32:14 EDT 2005

  Read the article

• Ubuntu in failed state after upgrade from 10.04 to 10.10 - How to recover?

  - by Harvey

  I was running Ubuntu 10.04 and attempted to upgrade to 10.10. I have a really slow connection (DSL 128kbits/sec) and copying the upgrade files took about 26 hours. I of course let it run unattended. When I came back, I notice the following 3 dlgs: 1. Could not install the upgrades The upgrade has aborted. Your system could be in an unusable state. A recovery will run now (dpkg -- configure -a). 2. gpk-update-icon Distribution upgrades available maverick 10.10 (stable) [more information] [Do no show this again] [Cancel] [Ok] 3. gpk-update-icon Security updates available The following important updates are available for your computer: libwebkit-1.0-2-dbg - Web content engine library for Gtk+ - Debugging symbols libcupsimage2 - Common UNIX Printing System(tm) - Raster image library ... What is the best response to all of this? I went through something similar in an attempted network upgrade from 8.04 to 10.04 and had to reload the unbootable machine fresh from distribution media (all data was lost). I'd like to avoid that here. I have not yet responded to the dialogs, and want to make sure the system is still bootable and not lose my data this time.

  Read the article

• ubuntu 9.04 pptp broken after a power failure

  - by kevin42

  I have a small Ubuntu 9.04 router setup as a NAT box and a PPTP server. After a power failure everything except the PPTP server still works. A windows client gets to "registering your computer on the network" but then says Error 742: The remote computer does not support the required data encryption type. I did some research and I think the problem is with the ppp_mppe module. When I try to run 'modprobe ppp_mppe' it hangs indefinitely. What would cause this hang? Any ideas how I can troubleshoot this further? Thanks for the help! UPDATE: I am still having the problem, however I have found some more information. When the first user tries to connect to pptp, the process list shows modprobe sha1 running, and one instance of modprobe ppp_mppe for each connection attempt. If I killall modprobe at this point the next connection attempt works, and everything is fine until the next reboot. I'm planning to do a clean install at some point in the future but I'd really like to get to the real cause of this.

  Read the article

• How do I setup JBoss 5.1.0.GA to run multiple instances?

  - by djangofan

  Does anyone have any experience or advice in setting up multiple JBoss 5.1.x instances on the same machine that has 1 network card? Here is what I did: Installed JBoss 5.1.0.GA into c:\myjboss 1.5. I copied the server/default directory to server/ports-01 and server/ports-02 so they have their own config. did I assume correctly? Ran .\run.bat -c ports-01 Ran .\run.bat -c ports-02 At this point there are 2 instances but the second instance doesn't load correctly because of what is probably a few port conflicts. For example: the http port ends up being 8080 for both instances, which it gets from line #49 in the C:\myjboss\server\all\conf\bindingservice.beans\META-INF\bindings-jboss-beans.xml file. Earlier in the server load it clearly gets the value from line#63 in that same file. I don't know why it gets part of the port config from line #49 and the other part from line#63. Confused. I also tried: .\run.bat -Djboss.service.binding.set=ports-01 -c ports-01 and it made little difference. Any ideas on what I am doing wrong?

  Read the article

• Running HTTP and HTTPS connections for a single domain (say, www.example.com) through a Cisco ACE SS

  - by Paddu

  My web application config has a Cisco ACE load balancing across a server farm and I want to use the ACE as an SSL endpoint as well. To make this work, the network architect has come up with a design where all secure pages have to be served from secure.my-domain.com, while non-secure pages are served up from www.my-domain.com. The reason for this is apparently that the configuring the Cisco ACE to accept HTTPS requests on port 443 for a particular public IP prevents the simultaneous acceptance of HTTP requests on port 80 for the same IP. While I'm not a networking (or Cisco) expert, this seems to be intuitively wrong, as it would prevent any website using the Cisco ACE to serve pages on http://www.my-domain.com and https://www.my-domain.com simultaneously. In this situation, my questions are: Is this truly a limitation of the Cisco ACE when used as an SSL endpoint? If not, then can I assume that we can set up the ACE to accept connections for a particular IP on ports 80 and 443, and function as an SSL endpoint for the incoming requests on 443? Links to appropriate documentation most welcome here. Assuming the setup in the previous question, can I then redirect both sets of requests to the same server farm on the same port?

  Read the article

• Group Policy for DNS Server Addresses

  - by John

  This question deals strictly with the methodology of using Active Directory to publish DNS settings and controlling the DNS server address order to domain attached clients. This is not asking about if this is the right function, role, or best use of group policy; but rather, how to make it work. I would like to be able to publish in group policy DNS addresses and possibly control the order in which the client consumes the addresses. I have tried following the information from this site without success. I set the following setting within group policy, but the client never shows the settings within the TCP/IP properties. Computer Configuration/Administrative Templates/Network/DNS Client/DNS Servers I did list them as a single space separated list. For example, the following: 192.168.0.1 192.168.10.3 192.168.34.2 192.168.2.67 192.168.56.99 192.168.99.23 This would be for Windows 7, Windows Server 2003, and Windows Server 2008 clients. I am not sure what I am doing wrong or how to get this to work. Am I missing a setting? Do I need to set something differently?

  Read the article

• How can I automatically synchronize a directory tree on multiple machines?

  - by Blacklight Shining

  I have two Mac laptops and a Debian server, each with a directory that I would like to keep in sync between the three. The solution should meet the following criteria (in rough order of importance): It must not use any third-party service (e.g. Dropbox, SugarSync, Google whatever). This does not include installing additional software (as long as it's free). It must not require me to use specific directories or change my way of storing things. (Dropbox does this IIRC) It must work in all directions (changes made on /any/ machine should be pushed to the others) All data sent must be encrypted (I have ssh keypairs set up already) It must work even when not all machines are available (changes should be pushed to a machine when it comes back online) It must work even when the /directories/ on some machines are not available (they may be stored on disk images which will not always be mounted) This can be solved for Macs by using launchd to automatically launch and kill (or in some way change the behavior of) whatever daemon is used for syncing when the images are mounted and unmounted. It must be immediate (using an event-based system, not a periodic one like cron) It must be flexible (if more machines are added, I should be able to incorporate them easily) I also have some preferences that I would like to be fulfilled, but do not have to be: It should notify me somehow if there are conflicts or other errors. It should recognize symbolic and hard links and create corresponding ones. It should allow me to create a list of exceptions (subdirectories which will not be synced at all). It should not require me to set up port forwarding or otherwise reconfigure a network. This can be solved by using an ssh tunnel with reverse port forwarding. If you have a solution that meets some, but not all of the criteria, please contribute it in the comments as it might be useful in some way, and it might be possible to meet some of the criteria separately. What I tried, and why it didn't work: rsync and lsyncd do not support bidirectional synchronization csync2 is designed for server clusters and does not appear to work with machines with dynamic IPs DRBD (suggested by amotzg) involves installing a kernel module and does not appear to work on systems running OS X

  Read the article

• Windows 7 sharing folder from command line, selecting users and triggering the "Apply" of changes

  - by clintp

  I have a drive that doesn't get mounted until after I log in. (A Truecrypt thumbdrive device, and no, I'm not making it a "System Favorite" to get around this.) I'd like to construct a batch file to share it once I've gotten it mounted because the sharing info doesn't seem to stick through a reboot. From the GUI, I'd go into the folder Properties-Sharing. And then in Advanced Sharing I'd pick the name to share it as. And then under the "Share..." button I'd pick the users and the permissions I want to grant them. After "Apply" there's a pause -- I'm not sure what's happening here, but the dialog says "Sharing Items..." -- and then everything is okay. From the command line, I've done: net share MyFolder=F:\MyFolder cacls F:\MyFolder /G FirstUser:F cacls F:\MyFolder /G OtherUser:F And this almost works. I can see the share on the network then, but nobody has permissions to do anything. If I go into the GUI and change anything (and I can see my command-line changes in there already) and press "Apply" I get the: "Sharing Items.... This may take a few minutes" Dialog... and then Voila! It works. I get the "Your folder is shared" dialog with the command-line changes I made, along with the GUI change that I made to trigger the "Sharing Items..." dialog. Everything's peachy. Is a service being restarted? Which one? What's triggering the sharing to take effect? And -- more importantly -- how do I do it from the command line?

  Read the article

• Laptop Randomly Turning On and Off

  - by Ian Mallett

  So, I have a pretty new laptop, and one of its quirks is that, at random times (though typically in the middle of the night), it seems to wake up from sleep mode, churn a bit, and then go back into sleep mode. I write "seems" because its fans are very loud, so it's obvious when it's not asleep, but during the time it is "on", I can't see anything on the screen. I have researched the problem somewhat, and could only find similar issues; nothing identical. In those cases, it appeared that certain devices could be responsible. Nothing is plugged into my computer during this behavior, but I nonetheless disabled every device's permission to wake the computer through the device manager. This included disabling the magic packet wake for the network (despite its only having a wireless connection). Using "powercfg /lastwake" gives an empty wake history. But, I also went through all the tasks and checked if they would wake the computer. None appeared to. The problem persisted, so, after some more research, I found this, and executed it for all power schemes on the computer. The problem persists. System: OS: Windows 7 Professional CPU: Intel 990X GPU: NVIDIA GeForce 580M/12GB RAM Motherboard: Clevo X7200 Model: NP7282-S1 (Sager-built laptop)

  Read the article

• Office365 Exchange: Cannot open shared two calendars in Outlook

  - by Mark Williams

  The problem: Outlook won't open the calendars on another user's mailbox and and a room mailbox, even when users have permission. Note: This problem is affecting more than one account on more than one machine. So I have a room mailbox and a personal mailbox on Exchange, both with shared calendars. There is a security group called "Scheduling Users" that have editor rights on both of these calenders. The room mailbox was created using PowerShell, per the instructions posted online (http://help.outlook.com/140/ee441202.aspx). Sharing worked on both of these folders initially. Users can still access these folders using OWA. So on to the problem. When users try to open these calendars in Outlook they receive one of the following messages. The set of folders cannot be opened. Microsoft Exchange is not available. Either there are network problems or the Exchange server is down for maintenance. Cannot open this item. Cannot open the free/busy information. The attempt to log on to Microsoft Exchange has failed. What I have tried so far: Resetting the permissions on both of the mailboxes. I deleted the security group permissions on both mailboxes, applied the change, then waited a bit and gave the permissions back. Deleted the OST file of the shared calendar from the Outlook data directory That is all I have been able to find online. Any thoughts? I have been going back and forth with the Office365 support folks for a while and they seem stumped too.

  Read the article

< Previous Page | 1098 1099 1100 1101 1102 1103 1104 1105 1106 1107 1108 1109  | Next Page >