Search Results

Search found 3578 results on 144 pages for 'smtp auth'.

Page 111/144 | < Previous Page | 107 108 109 110 111 112 113 114 115 116 117 118  | Next Page >

  • Bypassing SQUID on freebsd with PF

    - by epema
    I have PF+SQUID31 on FREEBSD-9.0, and I want to have some hosts(aka goodguys) to bypass the proxy, so that torrents are not logged. Also, I am not sure about transparent. It means that I dont have to configure proxy settings on the client side right? I have tried doing a redirect no rdr on $int_if inet proto {tcp,udp} from 192.168.1.233/32 to any However, no luck :( Here is a quick look of my conf files: SQUID /usr/local/etc/squid/squid.conf http_port 192.168.1.1:8080 transparent RC /etc/rc.conf: gateway_enable="YES" pf_enable="YES" pf_rules="/usr/local/etc/pf.conf" pflog_enable="YES" squid_enable="YES" I have squid31 installed from ports with SQUID_PF "Enable transparent proxying with PF" on PF /usr/loca/etc/pf.conf: int_if="re0" ext_if="bge0" localnet="{ 192.168.1.0/24 }" table <goodguys> const { "192.168.1.219", "192.168.1.233" } set block-policy drop set skip on lo0 scrub in all fragment reassemble scrub out all random-id max-mss 1440 block in on $ext_if pass out on $ext_if keep state block in on $int_if pass in on $int_if inet proto tcp from $int_if:network to $int_if port 8080 keep state pass in on $int_if inet proto udp from $int_if:network to $int_if port 21 keep state pass in on $int_if inet proto udp from $int_if:network to $int_if port 22 keep state pass in on $int_if inet proto udp from $int_if:network to $int_if port 53 keep state pass in on $int_if inet proto tcp from $int_if:network to any port { smtp, pop3 } keep state pass in on $int_if inet proto icmp from $int_if:network to $int_if keep state pass out on $int_if keep state What lines should I add in conf files? I am assuming that the problem is on the firewall(pf).

    Read the article

  • How do I deliver mail for wildcard addresses to a particular user/alias/program?

    - by David M
    I need to configure sendmail so that mail delivered for wildcard addresses is accepted for delivery and then delivered to a user, alias, or directly to a script. I can rewrite the envelope/headers any number of ways, but I don't know how to accept the wildcard address when it's provided in RCPT TO: Everything I've tried so far winds up with a 550 user unknown error. So here's a specific example: I want to be able to handle any address that consists of a series of digits followed by a dot followed by a word, then pipe that to a script. If the headers get rewritten, that's OK, but I need the envelope to contain the actual Delivered-To address. Here's the sort of SMTP session I need: 220 blah.foo.com ESMTP server ready; Thu, 22 Apr 2010 20:41:08 -0700 (PDT) HELO blort.foo.com 250 blah.foo.com Hello blort.foo.com [10.1.2.3], pleased to meet you MAIL FROM: <[email protected]> 250 2.1.0 <[email protected]>... Sender ok RCPT TO: <[email protected]> 250 2.1.5 <[email protected]>... Recipient ok I tried some stuff with regex maps, but I never got past 550 user unknown.

    Read the article

  • Flex: Result event given multiple times

    - by Tom
    Hello everybody!! I am trying to learn Flex and now i have the next code: http://pastebin.com/rZwxF7w1 This code is for my login component. I want to get a special string for encrypting my password. This string is given by my authservice. But when i login i get a multiple times a alert with Done(line 69 in the pastebin code or line 4 in the code on the bottom of this question). But i want that it shows one single time. Does someone know what is wrong with this code? Tom protected function tryLogin():void { encryptStringResult.addEventListener('result', function(event:ResultEvent):void { var encryptString:String = event.result.toString(); Alert.show('Done'); }); encryptStringResult.token = auth.getEncryptString(); }

    Read the article

  • Is Eclipse Remote System Explorer broken on Windows?

    - by Kev
    I have the following setup on Windows 7 Ultimate x64: Eclipse Indigo 2.7.2 (Build: M20120208-0800) Remote System Explorer 3.3.2 (see screenshot) (Oracle/Sun) Java 1.6 Update 31 (x86) Despite all my best efforts I am unable to connect to a remote system (a Centos 5.6 server on my local LAN) using a Remote System Explorer SSH connection - I've tried both password authentication and using my SSH private key. Here is a screenshot of both the Eclipse error dialogue and what is logged in my /var/log/secure log file: /var/log/secure: Apr 1 12:00:21 nagios sshd[6176]: Received disconnect from 172.16.3.88: 3: com.jcraft.jsch.JSchException: Auth fail When I connect for the first time I do get prompted to verify the authenticity of the remote host and the RSA key fingerprint. But that's as far as things go. Performing the same operation with the same credentials on my Fedora Core 16 box (also running the same version of Eclipse and Java) to the same server is successful. This leads me to believe that RSE SSH support on Windows is either broken or there's some piece of the SSH-on-Windows puzzle I'm missing. Is this the case?

    Read the article

  • Sending email with exim and external sender address

    - by Tronic
    i have following problem: i want to send emails with an rails webapp. i set up an exim server and when looking into the logs, the sending works, but the emails aren't sent really. i had the same problem with another isp. the sender address is hosted on another mailserver, other isp. i think the problem is, that sending doesn't work because the sener address isn't hosted on the same server. do you have any advice on this? the logs (exim) tell me the following: 2011-01-01 14:38:06 1PZ1eo-0000Ga-38 <= <> R=1PZ1eo-0000GY-1p U=Debian-exim P=local S=1778 2011-01-01 14:38:08 1PZ1eo-0000Ga-38 => [email protected] R=dnslookup T=remote_smtp H=mx1.emailsrvr.com [98.129.184.131] X=TLS1.0:RSA_AES_256_CBC_SHA1:32 DN="C=US,O=mx1.emailsrvr.com,OU=GT21850092,OU=See www.geotrust.com/resources/cps (c)08,OU=Domain Control Validated - QuickSSL(R),CN=mx1.emailsrvr.com" 2011-01-01 14:38:08 1PZ1eo-0000Ga-38 Completed [email protected] is the external sender-address! thank you! Edit with more details when sending a mail from command line with echo "Test" | mail -s Testmail [email protected] the logs says 2011-01-01 20:45:24 1PZ7OG-0001Vp-Rx <= root@gustav U=root P=local S=360 2011-01-01 20:45:26 1PZ7OG-0001Vp-Rx => [email protected] R=dnslookup T=remote_smtp H=gmail-smtp-in.l.google.com [209.85.229.27] X=TLS1.0:RSA_ARCFOUR_MD5:16 DN="C=US,ST=California,L=Mountain View,O=Google Inc,CN=mx.google.com" 2011-01-01 20:45:26 1PZ7OG-0001Vp-Rx Completed and i get the mail on my gmail account. but when sending by webapp (when testing locally with sendmail it works fine) i only get this log output 2011-01-01 20:50:08 1PZ7Sq-0001X9-L4 <= <> R=1PZ7Sq-0001X7-Jo U=Debian-exim P=local S=1780 2011-01-01 20:50:11 1PZ7Sq-0001X9-L4 => [email protected] R=dnslookup T=remote_smtp H=mx1.emailsrvr.com [98.129.184.3] X=TLS1.0:RSA_AES_256_CBC_SHA1:32 DN="C=US,O=mx1.emailsrvr.com,OU=GT21850092,OU=See www.geotrust.com/resources/cps (c)08,OU=Domain Control Validated - QuickSSL(R),CN=mx1.emailsrvr.com" 2011-01-01 20:50:11 1PZ7Sq-0001X9-L4 Completed

    Read the article

  • Trouble with backslash characters and rsyslog writing to postgres

    - by Flimzy
    I have rsyslog 4.6.4 configured to write mail logs to a PostgreSQL database. It all works fine, until the log message contains a backslash, as in this example: Jun 12 11:37:46 dc5 postfix/smtp[26475]: Vk0nYDKdH3sI: to=<[email protected], relay=----.---[---.---.---.---]:25, delay=1.5, delays=0.77/0.07/0.3/0.35, dsn=4.3.0, status=deferred (host ----.---[199.85.216.241] said: 451 4.3.0 Error writing to file d:\pmta\spool\B\00000414, status = ERROR_DISK_FULL in "DATA" (in reply to end of DATA command)) The above is the log entry, as written to /var/log/mail.log. It is correct. The trouble is that the backslash characters in the file name are interpreted as escapes when sent to the following SQL recipe: $template dcdb, "SELECT rsyslog_insert(('%timereported:::date-rfc3339%'::TIMESTAMPTZ)::TIMESTAMP,'%msg:::escape-cc%'::TEXT,'%syslogtag%'::VARCHAR)",STDSQL :syslogtag, startswith, "postfix" :ompgsql:/var/run/postgresql,dc,root,;dcdb As a result, the rsyslog_insert() stored procedure gets the following value for as msg: Vk0nYDKdH3sI: to=<[email protected], relay=----.---[---.---.---.---]:25, delay=1.5, delays=0.77/0.07/0.3/0.35, dsn=4.3.0, status=deferred (host ----.---[199.85.216.241] said: 451 4.3.0 Error writing to file d:pmtaspoolB The \p, \s, \B and \0 in the file name are interpreted by PostgreSQL as literal p, s, and B followed by a NULL character, thus early-terminating the string. This behavior can be easiily confirmed with: dc=# SELECT 'd:\pmta\spool\B\00000414'; ?column? -------------- d:pmtaspoolB (1 row) dc=# Is there a way to correct this problem? Is there a way I'm not finding in the rsyslog docs to turn \ into \\?

    Read the article

  • Can't seem to stop Postfix backscatter

    - by Ian
    I've just migrated to a Postfix system and can't seem to stop the backscatter messages to unknown addresses on the site. I have a file, validrcpt, that lists all the valid emails on the site - about eight of them. Yet when a message is sent to a non-existent address, instead of just dropping it, postfix is replying with a "Recipient address rejected: User unknown in virtual mailbox table" email. Do I have something set wrong? I've read http://www.postfix.org/BACKSCATTER_README.html but unless I'm caffeine deficient, I don't see what's happening and perhaps I'm just to used to my old qmail setup. Here's postconf -n: alias_database = hash:/etc/aliases alias_maps = hash:/etc/aliases append_dot_mydomain = no biff = no broken_sasl_auth_clients = yes config_directory = /etc/postfix content_filter = smtp-amavis:[127.0.0.1]:10024 home_mailbox = Maildir/ inet_interfaces = all inet_protocols = ipv4 local_recipient_maps = hash:/etc/postfix/validrcpt mailbox_command = /usr/lib/dovecot/deliver -c /etc/dovecot/dovecot.conf -m "${EXTENSION}" mailbox_size_limit = 0 mydestination = localhost myhostname = localhost mynetworks = 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128 myorigin = /etc/mailname policy-spf_time_limit = 3600s readme_directory = no recipient_bcc_maps = hash:/etc/postfix/recipient_bcc recipient_delimiter = + relay_recipient_maps = hash:/etc/postfix/relay_recipients relayhost = smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache smtp_use_tls = yes smtpd_banner = $myhostname ESMTP $mail_name (Ubuntu) smtpd_recipient_restrictions = permit_mynetworks,permit_sasl_authenticated,reject_unauth_destination,check_policy_service unix:private/policy-spf,reject_rbl_client zen.spamhaus.org,reject_rbl_client bl.spamcop.net,reject_rbl_client cbl.abuseat.org,check_policy_service inet:127.0.0.1:10023 smtpd_relay_restrictions = permit_mynetworks permit_sasl_authenticated defer_unauth_destination smtpd_sasl_auth_enable = yes smtpd_sasl_authenticated_header = yes smtpd_sasl_local_domain = $myhostname smtpd_sasl_path = private/dovecot-auth smtpd_sasl_security_options = noanonymous smtpd_sasl_type = dovecot smtpd_sender_restrictions = reject_unknown_sender_domain smtpd_tls_auth_only = yes smtpd_tls_cert_file = /etc/dovecot/dovecot.pem smtpd_tls_key_file = /etc/dovecot/private/dovecot.pem smtpd_tls_mandatory_ciphers = medium smtpd_tls_mandatory_protocols = SSLv3, TLSv1 smtpd_tls_received_header = yes smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtpd_use_tls = yes tls_random_source = dev:/dev/urandom virtual_gid_maps = static:5000 virtual_mailbox_base = /home/vmail virtual_mailbox_domains = digitalhit.com virtual_mailbox_maps = hash:/etc/postfix/vmaps virtual_minimum_uid = 1000 virtual_uid_maps = static:5000

    Read the article

  • Local references to old server name remain after Windows 2003 server rename

    - by imagodei
    I have a standalone Win 2003 server with Windows Sharepoint Services (WSS3) running on it. I had to rename the server and I had bunch of problems resulting from this. Note that the server is not in AD environment. Most obvious problems were with Sharepoint, which didn't work. I was somewhat naive to think it will work in the first place, but OK - I've solved this using step 1 & 3 from this site (TNX) Other curious behavior/problems remain. Most disturbing is that Sharepoint isn't able to send email notifications to participants. I noticed there are several references to old server name everywhere I look: in Registry, in Windows Internal Database (MICROSOFT##SSEE). I see instances of old server name in the Sharepoint Central Administration - Operations - Servers in farm. There is reference to a servers: oldname.domain.local oldname.local On one of those servers there is also Windows SharePoint Services Outgoing E-Mail Service (Stopped). Also, when I try to telnet locally to the mail server (Simple Mail Transfer Protocol (SMTP) service), I get a response: 220 oldname.domain.local Microsoft ESMTP MAIL Service, Version: 6.0.3790.4675 ready at Tue, 15 Jun 2010 13:56:19 +0200 IMO these strange naming problems are also the reason why email notifications from within Sharepoint don't work. Can anyone tell me how to correct/replace those references to oldservername? Why is the email service insisting on old name? Of course I would like to try it without reinstalling the server. TNX!

    Read the article

  • Authenticating wcf service

    - by Muhammad Jamal Shaikh
    hi , i want to implement a web service which is both in java and .net.but i will first create a wcf service and later convert the code to java . for securing the webservice , i have this in my mind. i shall be implementing asp.net form authentication type of stuff . i intent to sent a token to the client on providing valid userID and password to the login method. in return i would send a token. on all other service operations i shall check the token . Now i have a wcf client and a wcf service . what should be the shortest way forward ?should i use soap auth header to send the user ID and password and how should the token be transported ( in which field ? http or soap's ?) . P.S: of course i shall enable ssl later.

    Read the article

  • Postfix enable SSL 465 failed

    - by user221290
    I have installed the Postfix and enabled SSL/TLS, just tested, I can sent email from port 25, 578, but cannot sent email from port 465, the log is: May 26 17:24:06 mail postfix/smtpd[28721]: SSL_accept:SSLv3 write server hello A May 26 17:24:06 mail postfix/smtpd[28721]: SSL_accept:SSLv3 write certificate A May 26 17:24:06 mail postfix/smtpd[28721]: SSL_accept:SSLv3 write server done A May 26 17:24:06 mail postfix/smtpd[28721]: SSL_accept:SSLv3 flush data May 26 17:24:06 mail postfix/smtpd[28721]: SSL3 alert read:fatal:certificate unknown May 26 17:24:06 mail postfix/smtpd[28721]: SSL_accept:failed in SSLv3 read client certificate A May 26 17:24:06 mail postfix/smtpd[28721]: SSL_accept error from unknown[10.155.36.240]: 0 May 26 17:24:06 mail postfix/smtpd[28721]: warning: TLS library problem: 28721:error:14094416:SSL routines:SSL3_READ_BYTES:sslv3 alert certificate unknown:s3_pkt.c:1197:SSL alert number 46: May 26 17:24:06 mail postfix/smtpd[28721]: lost connection after CONNECT from unknown[10.155.36.240] May 26 17:24:06 mail postfix/smtpd[28721]: disconnect from unknown[10.155.36.240] My email server is: 10.155.34.117, and email client is: 10.155.36.240, the client error is: Could not connect to SMTP host: 10.155.34.117, port: 465. My Master.cf: smtps inet n - n - - smtpd -o smtpd_tls_wrappermode=yes My main.cf: smtpd_use_tls = yes smtpd_tls_auth_only = no smtpd_tls_key_file = /etc/pki/myca/mail.key smtpd_tls_cert_file = /etc/pki/myca/mail.crt smtpd_tls_CAfile = /etc/pki/myca/cacert_new.pem smtpd_tls_loglevel = 2 smtpd_tls_received_header = yes smtpd_tls_session_cache_timeout = 3600s smtpd_tls_session_cache_database = btree:/etc/postfix/smtpd_scache Seems it's my certificate issue, but I have tried to grant the file many times...I have no idea on this, please help!

    Read the article

  • Too many concurrent connections Exchange 2010. What else is there to check?

    - by hydroparadise
    I thought that I had this under control before. But for some reason during our last email marketing promo, I start receiving from our mass email client (built in house).. The message could not be sent to the SMTP server. The transport error code is 0x800ccc67. The server repsonse was 421 4.3.2 The maximum number of concurrent connections has exceeded a limit, closing transmission channel again. There's several places I've checked to make sure that wouldn't be an issue. First I checked that receive connector was set to receive an adequate number of connections on our relay connector (1000 connections). Then, I would later find out about Throttling Policies. I created one and set all the properties I knew to set in terms of the policy following properties to 1000; EWSMaxConcurrency, OWAMaxConcurrency, CPAMaxConcurrency, and CPAMaxConcurrency. Still, the email client starts receiving the error shortly after 100 has been sent and takes about 15-30 seconds. The process is then repeatable, but still the error gets received at the same spot everytime. Is there a rate setting that I am missing? Was there a windows update that I missed looking at? Should the software have it's own throttling feature?

    Read the article

  • Exim: send every emails with a predefined sender

    - by Gregory MOUSSAT
    We use Exim on our servers to send emails only from local automated users, as root, cron, etc. We have to specify every possible users into /etc/email-addresses. For example: root: [email protected] cron: [email protected] backup: [email protected] This allow us te receive every email generated. The problem is when we add a user for whatever reason (for example when we add a package, some add a user), we can forget to add this user to /etc/email-addresses. Most of the time it's not a problem, but this is not clean. And the overall method is not clean. We'd like to configure Exim to send every emails with the same source address. i.e. every sent email comes from [email protected] One way could be to use a wildcard or a regular expression into /etc/email-addresses but this is not supported. I don't currently understand Exim enought to figure out how to modify this in a way or another. Ideally, Exim should look into /etc/email-addresses first, and if no match it use the predefined address. But this is very secondary. There are two places where this address is used: 1. when Exim send the FROM: command to the smtp server 2. inside the header edit: The rewrite section is the original one from Debian begin rewrite .ifndef NO_EAA_REWRITE_REWRITE *@+local_domains "${lookup{${local_part}}lsearch{/etc/email-addresses} \ {$value}fail}" Ffrs *@ETC_MAILNAME "${lookup{${local_part}}lsearch{/etc/email-addresses} \ {$value}fail}" Ffrs .endif (comments removed)

    Read the article

  • Recommendations for handling Directory Harvesting spam on Exchange 2003

    - by Aaron Alton
    Our Exchange server is getting slammed with anywhere between 450,000 and 700,000 spam messages per day. We receive about 1700 legitimate messages in the same time frame. Roughly 75% of the spam is directory harvesting. We currently have GFI MailEssentials installed. To it's credit, it's doing a very good job, but the sheer volume of spam that we're receiving, and the number of connections that our exchange server is making is preventing legitimate email from being delivered in a timely manner. GFI is set up to check for directory harvesting at the SMTP level, which I presume intercepts the mail before it hits the Exchange services , or goes through SMSE. This "module" is ordered at the top of the list, so (hopefully) dealing with the harvesting is consuming a minimum amount of server resources and bandwidth. My question is, is there anything I can do to prevent our Exchange server's connection pool from being eaten up by these spam hosts? We had to limit the number of concurrent connections being made by Exchange, because it was consuming all of our bandwidth. Thanks, in advance.

    Read the article

  • Trying to limit IMAP folders/mailboxes my iPhone/iPad sees

    - by QuantumMechanic
    (Note: I am using dovecot 1.0.10 on Ubuntu 8.04.4 LTS. Yes, I know I need to upgrade before next year :) (Note: The SMTP/IMAP server in question only serves my family, so there's only a very few users. Certainly what I propose below, even it it works, would be a logistical nightmare with any significant number of users). I have noticed (and have confirmed via google) that the iOS mail app is terrible in its handling of IMAP subscriptions, namespaces, etc. For example, my iPhone and iPad will see EVERYTHING (all mailboxes, folders, etc.), whereas clients like Thunderbird, alpine, etc. only see what I tell them to see. This makes it an incredible pain to move mail between mailboxes because I have to scroll through a gazillion things. The mail_location in dovecot.conf is: mail_location = mbox:%h/Mail/:INBOX=/var/mail/%u To get around this, I've been considering doing the following for user foo: Create a dovecot userdb with a foo-ios virtual user in it, whose UID is identical to that of the real (in /etc/passwd) foo user and with a homedir of /home/foo-ios. ln -s /var/mail/foo /var/mail/foo-ios mkdir -p /home/foo-ios/Mail cd /home/foo-ios/Mail ln -s /home/foo/Mail/mailbox-i-want-visible mailbox-i-want-visible Make symlinks for the rest of limited set of mailboxes/folders I want visible to the iOS mail app. chown -R foo:foo /home/foo-ios Change iOS mail app settings to log in as user foo-ios instead of user foo. Will this work or will there be some index/file corruption hell because there will be two sets of indexes (one set living in /home/foo/Mail/.imap and other set living in /home/foo-ios/Mail/.imap) indexing the same underlying mbox files? And I'd be more than happy to hear of a better way to do this with dovecot! (Or to hear that dovecot 2.x works better with iOS devices).

    Read the article

  • Problems configuring logstash for email output

    - by user2099762
    I'm trying to configure logstash to send email alerts and log output in elasticsearch / kibana. I have the logs successfully syncing via rsyslog, but I get the following error when I run /opt/logstash-1.4.1/bin/logstash agent -f /opt/logstash-1.4.1/logstash.conf --configtest Error: Expected one of #, {, ,, ] at line 23, column 12 (byte 387) after filter { if [program] == "nginx-access" { grok { match = [ "message" , "%{IPORHOST:remote_addr} - %{USERNAME:remote_user} [%{HTTPDATE:time_local}] %{QS:request} %{INT:status} %{INT:body_bytes_sent} %{QS:http_referer} %{QS:http_user_agent}” ] } } } output { stdout { } elasticsearch { embedded = false host = " Here is my logstash config file input { syslog { type => syslog port => 5544 } } filter { if [program] == "nginx-access" { grok { match => [ "message" , "%{IPORHOST:remote_addr} - %{USERNAME:remote_user} \[% {HTTPDATE:time_local}\] %{QS:request} %{INT:status} %{INT:body_bytes_sent} %{QS:http_referer} %{QS:http_user_agent}” ] } } } output { stdout { } elasticsearch { embedded => false host => "localhost" cluster => "cluster01" } email { from => "[email protected]" match => [ "Error 504 Gateway Timeout", "status,504", "Error 404 Not Found", "status,404" ] subject => "%{matchName}" to => "[email protected]" via => "smtp" body => "Here is the event line that occured: %{@message}" htmlbody => "<h2>%{matchName}</h2><br/><br/><h3>Full Event</h3><br/><br/><div align='center'>%{@message}</div>" } } I've checked line 23 which is referenced in the error and it looks fine....I've tried taking out the filter, and everything works...without changing that line. Please help

    Read the article

  • Outbound mail issue during Exchange 2003 migration

    - by user27574
    Dear all, I am having an outbound email issue during the Exch 03 migration. Basically, we are migrating Exch03 to new hardware, both servers are Server 03 based. Everything runs smooth while setting up and installing Exch 03 on the new box. Public folders are all replicated. My issues are shown below.... 1) After starting to move users' mailboxes to new Exch 03, they receive some undeliverable mail and bounced back mail from some vendors, then I move few users back to test around, they have no problem at all after moving back to old Exch 03. 2) Another issue is our company has Blackberry users, we don't have BES. Under each user's mailboxes, we have forward rule setup, so that both user inbox and BB can receive email. User who is moved to the new Exch 03 server, they can only send email to the BB user's inbox, mail cannot be forwarded to BB at all, smtp queue stacks up and keep trying until the time is expired. Since not all emails that the users send out from the new Exch have problem, I am not able to narrow down what is the issue here. Can anyone give me some ideas? Could this be MX record / Reversed DNS relate? Or firewall NAT rule setting? Thanks.

    Read the article

  • Reconnecting OST with Exchange

    - by syrenity
    Hi. I have a quite big problem with customer's MS Exchange. The server got it's disk filled about 2 weeks ago, so it's currently offline. They plan to upgrade it, but not in hurry, as they use it mainly for OWA and back-up - the mails exchange is done via SMTP and POP3. Trying to diagnose some problem today, one of the users has (following the ISP instructions), removed the Exchange account from Outlook, which essentially left the OST orphaned. The user naturally didn't move the emails or any other data to the Archive / PST before, so these emails located on the OST only. So currently I'm trying to figure out how to restore them. There are 2 options: 1) Make the user buy some tool to convert them to PST, and import as archive / main Outlok file? 2) Reconnect the Outlook to Exchange (once it up), let it sync the old server content, then shutdown Outlook and replace the new OST with the old one, start Outlook again in offline mode and move these files to archive. 3) Any other method? Can someone advice what would be the best approach here? The used versions are Outlook 2007 and Exchange 2003. Thanks!

    Read the article

  • Why does Exchange 2003 silently reject emails with large attachments?

    - by Cypher
    Our environment: Exchange Server 2003 Standard, single instance, running on Windows Server 2003 Standard. configured to not send/receive mail with attachments larger than 10 MB. NDRs are not enabled. The issue: When an external sender sends an email with an attachment larger than 10MB, Exchange, as configured, does not receive the message. However, the sender of that message does not receive any notifications from his own mail server that the message could not be delivered due to attachment size. However, if an external user tries to send an email to a non-existent user, they do receive a message from their mail server indicating that the user does not exist. Why is that, and is there anything I can do about it? It would be nice if the sender received notification that the attachment file size exceeds our limits and their message was never received... Update The Exchange server has a SpamAssassin box in front of it... could that have something to do with it? Here is one of the last lines from SpamAssassin's logs when searching for my test e-mails: mail postfix/smtp[19133]: 2B80917758: to=, relay=10.0.0.8[10.0.0.8]:25, delay=4.3, delays=2.6/0/0/1.7, dsn=2.6.0, status=sent (250 2.6.0 Queued mail for delivery) My assumption is that Spam Assassin thinks the message is OK and is forwarding it off to Exchange. Update I've verified that Exchange is receiving the message and generating an NDR. However, delivery of NDRs are disabled to prevent Backscatter. Is there something that I can do to get Exchange to send a bounce message to the sending mail server (or verify that message is being sent) so the sending mail server can notify its sender of the bounce?

    Read the article

  • Writing scripts that work with my emails

    - by queueoverflow
    I currently use Thunderbird as my email client and it has some filters, but that seems to be all I can program in it. On several occasions, I heard people talk about their automated email workflow. One example: When I do not get a reply to an email the script will send a “nag” email asking why I did not get a response yet. Or another one: I get so much mail that I cannot read them all. After a week, unread email is put on hold and the sender gets a “if it was important, reply to this email and it will be set to un-hold” email. The script then takes the answer and move it to back into the important folder. I read about FiltaQuilla which seems nice, but it does not seem to be the kind of programming that I am looking for. How can I write general purpose scripts like those? Do I need to write my own Python IMAP/SMTP client (if that is even possible) to to this or can I script it it, say JavaScript, in Thunderbird?

    Read the article

  • Remote paging with Nagios when network is down and email won't work -- cellular modems and alternatives

    - by Quinten
    What is the best option for remote paging when network services are down? I'm looking for a solution that can let me know when network services are down during off-hours only, and especially when email/smtp services are out. Therefore, it needs to be redundant to our network and power supply. I'm imagining a cellular modem is one option. What's the price range for these? Is anybody using them and feel that they are worth the cost? I'm imagining that it's something we would end up sending an emergency page ~ 1x/month at most, so I'd like the pricing to reflect that--I don't mind a high per-page cost as long as it has a low recurring cost. Another option would be to expose at least one server to remote ping, and run a check script on a remote server. Are there paid options for this? Currently, we run Nagios on a Linux VM on a Windows 2008 Hyper-V host. It would be great if the solution would work in that environment, but I know it's tricky with external devices, and we could move Nagios to a standalone workstation if needed.

    Read the article

  • How do I set up an email server that automatically maintains a list of previous recipients?

    - by hsivonen
    I want to set up an email server with the following characteristics. What software (besides bogofilter and clamav that I'm naming) should I use and what HOWTOs should I read? The server should run some flavor of Linux that's as low-maintenance as possible and self-updates for security patches in a timely fashion. (Debian stable?) When email is sent, all the recipients are stored in the list of previous recipients maintained by the server. Scan incoming messages with clamav and treat as spam if it contains viruses. When email arrives (if it passed clamav), if the sender is on the list of previous recipients, bypass spam filter. If the List-Id header names a mailing list on a manually maintained list of known-clean mailing lists, bypass spam filter and deliver into a mailbox depending on the mailing list name. Email that wasn't from previous recipients, manually white listed domains or mailing lists gets filtered by bogofilter. Spam goes into a spam mailbox. Email considered to be ham should automatically be fed to bogofilter training as ham. Email considered to be spam (incl. messages with viruses) should be automatically fed to bogofilter training as spam. There should be mailboxes for false ham and false spam that an IMAP client can move email into so that the server retrains bogofilter appropriately. Email sending requires SMTP over SSL. Email reading requires IMAPS. Should I also want to use SpamAssassin in addition to bogofilter?

    Read the article

  • ubuntu 10.04 + php + postfix

    - by mononym
    I have a server I am running: Ubuntu 10.04 php 5.3.5 (fpm) Nginx I have installed postfix, and set it to loopback-only (only need to send) The problem is it is not sending. if i issue (at command line): echo "testing local delivery" | mail -s "test email to localhost" [email protected] I get the email no problem, but through PHP it does not arrive. When I send it via PHP, mail.log shows: Mar 28 10:15:04 host postfix/pickup[32102]: 435EF580D7: uid=0 from=<root> Mar 28 10:15:04 host postfix/cleanup[32229]: 435EF580D7: message-id=<20120328091504.435EF580D7@FQDN> Mar 28 10:15:04 host postfix/qmgr[32103]: 435EF580D7: from=<root@FQDN>, size=1127, nrcpt=1 (queue active) Mar 28 10:15:04 host postfix/local[32230]: 435EF580D7: to=<root@FQDN>, orig_to=<root>, relay=local, delay=3.1, delays=3/0.01/0/0.09, dsn=2.0.0, status=sent (delivered to maildir) Mar 28 10:15:04 host postfix/qmgr[32103]: 435EF580D7: removed any help appreciated, my main.cf file: smtpd_banner = $myhostname ESMTP $mail_name (Debian/GNU) biff = no # appending .domain is the MUA's job. append_dot_mydomain = no # Uncomment the next line to generate "delayed mail" warnings #delay_warning_time = 4h readme_directory = no # TLS parameters smtpd_tls_cert_file=/etc/ssl/certs/ssl-cert-snakeoil.pem smtpd_tls_key_file=/etc/ssl/private/ssl-cert-snakeoil.key smtpd_use_tls=yes smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache # See /usr/share/doc/postfix/TLS_README.gz in the postfix-doc package for # information on enabling SSL in the smtp client. myhostname = FQDN alias_maps = hash:/etc/aliasesalias_database = hash:/etc/aliases myorigin = /etc/mailname #myorigin = $mydomain mydestination = FQDN, localhost.FQDN, , localhost relayhost = $mydomain mynetworks = 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128 mailbox_size_limit = 0 recipient_delimiter = + inet_interfaces = loopback-only virtual_alias_maps = hash:/etc/postfix/virtual home_mailbox = mail/

    Read the article

  • Single SignOn - Best practice

    - by halfdan
    Hi Guys, I need to build a scalable single sign-on mechanism for multiple sites. Scenario: Central web application to register/manage account (Server in Europe) Several web applications that need to authenticate against my user database (Servers in US/Europe/Pacific region) I am using MySQL as database backend. The options I came up with are either replicating the user database across all servers (data security?) or allowing the servers to directly connect to my MySQL instance by explicitly allowing connections from their IPs in my.cnf (high load? single point of failure?). What would be the best way to provide a scalable and low-latency single sign-on for all web applications? In terms of data security would it be a good idea to replicate the user database across all web applications? Note: All web applications provide an API which users can use to embed widgets into their own websites. These widgets work through a token auth mechanism which will again need to authenticate against my user database.

    Read the article

  • Single SingOn - Best practice

    - by halfdan
    Hi Guys, I need to build a scalable single sign-on mechanism for multiple sites. Scenario: Central web application to register/manage account (Server in Europe) Several web applications that need to authenticate against my user database (Servers in US/Europe/Pacific region) I am using MySQL as database backend. The options I came up with are either replicating the user database across all servers (data security?) or allowing the servers to directly connect to my MySQL instance by explicitly allowing connections from their IPs in my.cnf (high load? single point of failure?). What would be the best way to provide a scalable and low-latency single sign-on for all web applications? In terms of data security would it be a good idea to replicate the user database across all web applications? Note: All web applications provide an API which users can use to embed widgets into their own websites. These widgets work through a token auth mechanism which will again need to authenticate against my user database.

    Read the article

  • Custom login in Django

    - by alpgs
    Django newbie here. I wrote simplified login form which takes email and password. It works great if both email and password are supplied, but if either is missing i get KeyError exception. According to django documentation this should never happen: By default, each Field class assumes the value is required, so if you pass an empty value -- either None or the empty string ("") -- then clean() will raise a ValidationError exception I tried to write my own validators for fields (clean_email and clean_password), but it doesn't work (ie I get KeyError exception). What am I doing wrong? class LoginForm(forms.Form): email = forms.EmailField(label=_(u'Your email')) password = forms.CharField(widget=forms.PasswordInput, label=_(u'Password')) def clean_email(self): data = self.cleaned_data['email'] if not data: raise forms.ValidationError(_("Please enter email")) return data def clean_password(self): data = self.cleaned_data['password'] if not data: raise forms.ValidationError(_("Please enter your password")) return data def clean(self): try: username = User.objects.get(email__iexact=self.cleaned_data['email']).username except User.DoesNotExist: raise forms.ValidationError(_("No such email registered")) password = self.cleaned_data['password'] self.user = auth.authenticate(username=username, password=password) if self.user is None or not self.user.is_active: raise forms.ValidationError(_("Email or password is incorrect")) return self.cleaned_data

    Read the article

< Previous Page | 107 108 109 110 111 112 113 114 115 116 117 118  | Next Page >