message listener - Page 112

Why does defined(X) not work in a preprocessor definition without a space?

- by Devin

A preprocessor definition that includes defined(X) will never evaluate to true, but (defined X) will. This occurs in MSVC9; I have not tested other preprocessors. A simple example: #define FEATURE0 1 #define FEATURE1 0 #define FEATURE2 1 #define FEATURE3 (FEATURE0 && !FEATURE1 && (defined(FEATURE2))) #define FEATURE4 (FEATURE0 && !FEATURE1 && (defined FEATURE2)) #define FEATURE5 (FEATURE0 && !FEATURE1 && (defined (FEATURE2))) #if FEATURE3 #pragma message("FEATURE3 Enabled") #elif (FEATURE0 && !FEATURE1 && (defined(FEATURE2))) #pragma message("FEATURE3 Enabled (Fallback)") #endif #if FEATURE4 #pragma message("FEATURE4 Enabled") #elif (FEATURE0 && !FEATURE1 && (defined FEATURE2)) #pragma message("FEATURE4 Enabled (Fallback)") #endif #if FEATURE5 #pragma message("FEATURE5 Enabled") #elif (FEATURE0 && !FEATURE1 && (defined (FEATURE2))) #pragma message("FEATURE5 Enabled (Fallback)") #endif The output from the compiler is: 1FEATURE3 Enabled (Fallback) 1FEATURE4 Enabled 1FEATURE5 Enabled Working cases: defined (X), defined( X ), and defined X. Broken case: defined(X) Why is defined evaluated differently when part of a definition, as in the #if cases in the example, compared to direct evaluation, as in the #elif cases in the example?

Read the article

WCF WS-Security and WSE Nonce Authentication

- by Rick Strahl

WCF makes it fairly easy to access WS-* Web Services, except when you run into a service format that it doesn't support. Even then WCF provides a huge amount of flexibility to make the service clients work, however finding the proper interfaces to make that happen is not easy to discover and for the most part undocumented unless you're lucky enough to run into a blog, forum or StackOverflow post on the matter. This is definitely true for the Password Nonce as part of the WS-Security/WSE protocol, which is not natively supported in WCF. Specifically I had a need to create a WCF message on the client that includes a WS-Security header that looks like this from their spec document:<soapenv:Header> <wsse:Security soapenv:mustUnderstand="1" xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd"> <wsse:UsernameToken wsu:Id="UsernameToken-8" xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd"> <wsse:Username>TeStUsErNaMe1</wsse:Username> <wsse:Password Type="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-username-token-profile-1.0#PasswordText" >TeStPaSsWoRd1</wsse:Password> <wsse:Nonce EncodingType="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-soap-message-security-1.0#Base64Binary" >f8nUe3YupTU5ISdCy3X9Gg==</wsse:Nonce> <wsu:Created>2011-05-04T19:01:40.981Z</wsu:Created> </wsse:UsernameToken> </wsse:Security> </soapenv:Header> Specifically, the Nonce and Created keys are what WCF doesn't create or have a built in formatting for. Why is there a nonce? My first thought here was WTF? The username and password are there in clear text, what does the Nonce accomplish? The Nonce and created keys are are part of WSE Security specification and are meant to allow the server to detect and prevent replay attacks. The hashed nonce should be unique per request which the server can store and check for before running another request thus ensuring that a request is not replayed with exactly the same values. Basic ServiceUtl Import - not much Luck The first thing I did when I imported this service with a service reference was to simply import it as a Service Reference. The Add Service Reference import automatically detects that WS-Security is required and appropariately adds the WS-Security to the basicHttpBinding in the config file:<?xml version="1.0" encoding="utf-8" ?> <configuration> <system.serviceModel> <bindings> <basicHttpBinding> <binding name="RealTimeOnlineSoapBinding"> <security mode="Transport" /> </binding> <binding name="RealTimeOnlineSoapBinding1" /> </basicHttpBinding> </bindings> <client> <endpoint address="https://notarealurl.com:443/services/RealTimeOnline" binding="basicHttpBinding" bindingConfiguration="RealTimeOnlineSoapBinding" contract="RealTimeOnline.RealTimeOnline" name="RealTimeOnline" /> </client> </system.serviceModel> </configuration> If if I run this as is using code like this:var client = new RealTimeOnlineClient(); client.ClientCredentials.UserName.UserName = "TheUsername"; client.ClientCredentials.UserName.Password = "ThePassword"; … I get nothing in terms of WS-Security headers. The request is sent, but the the binding expects transport level security to be applied, rather than message level security. To fix this so that a WS-Security message header is sent the security mode can be changed to: <security mode="TransportWithMessageCredential" /> Now if I re-run I at least get a WS-Security header which looks like this:<s:Envelope xmlns:s="http://schemas.xmlsoap.org/soap/envelope/" xmlns:u="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd"> <s:Header> <o:Security s:mustUnderstand="1" xmlns:o="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd"> <u:Timestamp u:Id="_0"> <u:Created>2012-11-24T02:55:18.011Z</u:Created> <u:Expires>2012-11-24T03:00:18.011Z</u:Expires> </u:Timestamp> <o:UsernameToken u:Id="uuid-18c215d4-1106-40a5-8dd1-c81fdddf19d3-1"> <o:Username>TheUserName</o:Username> <o:Password Type="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-username-token-profile-1.0#PasswordText" >ThePassword</o:Password> </o:UsernameToken> </o:Security> </s:Header> Closer! Now the WS-Security header is there along with a timestamp field (which might not be accepted by some WS-Security expecting services), but there's no Nonce or created timestamp as required by my original service. Using a CustomBinding instead My next try was to go with a CustomBinding instead of basicHttpBinding as it allows a bit more control over the protocol and transport configurations for the binding. Specifically I can explicitly specify the message protocol(s) used. Using configuration file settings here's what the config file looks like:<?xml version="1.0"?> <configuration> <system.serviceModel> <bindings> <customBinding> <binding name="CustomSoapBinding"> <security includeTimestamp="false" authenticationMode="UserNameOverTransport" defaultAlgorithmSuite="Basic256" requireDerivedKeys="false" messageSecurityVersion="WSSecurity10WSTrustFebruary2005WSSecureConversationFebruary2005WSSecurityPolicy11BasicSecurityProfile10"> </security> <textMessageEncoding messageVersion="Soap11"></textMessageEncoding> <httpsTransport maxReceivedMessageSize="2000000000"/> </binding> </customBinding> </bindings> <client> <endpoint address="https://notrealurl.com:443/services/RealTimeOnline" binding="customBinding" bindingConfiguration="CustomSoapBinding" contract="RealTimeOnline.RealTimeOnline" name="RealTimeOnline" /> </client> </system.serviceModel> <startup> <supportedRuntime version="v4.0" sku=".NETFramework,Version=v4.0"/> </startup> </configuration> This ends up creating a cleaner header that's missing the timestamp field which can cause some services problems. The WS-Security header output generated with the above looks like this:<s:Header> <o:Security s:mustUnderstand="1" xmlns:o="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd"> <o:UsernameToken u:Id="uuid-291622ca-4c11-460f-9886-ac1c78813b24-1"> <o:Username>TheUsername</o:Username> <o:Password Type="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-username-token-profile-1.0#PasswordText" >ThePassword</o:Password> </o:UsernameToken> </o:Security> </s:Header> This is closer as it includes only the username and password. The key here is the protocol for WS-Security:messageSecurityVersion="WSSecurity10WSTrustFebruary2005WSSecureConversationFebruary2005WSSecurityPolicy11BasicSecurityProfile10" which explicitly specifies the protocol version. There are several variants of this specification but none of them seem to support the nonce unfortunately. This protocol does allow for optional omission of the Nonce and created timestamp provided (which effectively makes those keys optional). With some services I tried that requested a Nonce just using this protocol actually worked where the default basicHttpBinding failed to connect, so this is a possible solution for access to some services. Unfortunately for my target service that was not an option. The nonce has to be there. Creating Custom ClientCredentials As it turns out WCF doesn't have support for the Digest Nonce as part of WS-Security, and so as far as I can tell there's no way to do it just with configuration settings. I did a bunch of research on this trying to find workarounds for this, and I did find a couple of entries on StackOverflow as well as on the MSDN forums. However, none of these are particularily clear and I ended up using bits and pieces of several of them to arrive at a working solution in the end. http://stackoverflow.com/questions/896901/wcf-adding-nonce-to-usernametoken http://social.msdn.microsoft.com/Forums/en-US/wcf/thread/4df3354f-0627-42d9-b5fb-6e880b60f8ee The latter forum message is the more useful of the two (the last message on the thread in particular) and it has most of the information required to make this work. But it took some experimentation for me to get this right so I'll recount the process here maybe a bit more comprehensively. In order for this to work a number of classes have to be overridden: ClientCredentials ClientCredentialsSecurityTokenManager WSSecurityTokenizer The idea is that we need to create a custom ClientCredential class to hold the custom properties so they can be set from the UI or via configuration settings. The TokenManager and Tokenizer are mainly required to allow the custom credentials class to flow through the WCF pipeline and eventually provide custom serialization. Here are the three classes required and their full implementations:public class CustomCredentials : ClientCredentials { public CustomCredentials() { } protected CustomCredentials(CustomCredentials cc) : base(cc) { } public override System.IdentityModel.Selectors.SecurityTokenManager CreateSecurityTokenManager() { return new CustomSecurityTokenManager(this); } protected override ClientCredentials CloneCore() { return new CustomCredentials(this); } } public class CustomSecurityTokenManager : ClientCredentialsSecurityTokenManager { public CustomSecurityTokenManager(CustomCredentials cred) : base(cred) { } public override System.IdentityModel.Selectors.SecurityTokenSerializer CreateSecurityTokenSerializer(System.IdentityModel.Selectors.SecurityTokenVersion version) { return new CustomTokenSerializer(System.ServiceModel.Security.SecurityVersion.WSSecurity11); } } public class CustomTokenSerializer : WSSecurityTokenSerializer { public CustomTokenSerializer(SecurityVersion sv) : base(sv) { } protected override void WriteTokenCore(System.Xml.XmlWriter writer, System.IdentityModel.Tokens.SecurityToken token) { UserNameSecurityToken userToken = token as UserNameSecurityToken; string tokennamespace = "o"; DateTime created = DateTime.Now; string createdStr = created.ToString("yyyy-MM-ddThh:mm:ss.fffZ"); // unique Nonce value - encode with SHA-1 for 'randomness' // in theory the nonce could just be the GUID by itself string phrase = Guid.NewGuid().ToString(); var nonce = GetSHA1String(phrase); // in this case password is plain text // for digest mode password needs to be encoded as: // PasswordAsDigest = Base64(SHA-1(Nonce + Created + Password)) // and profile needs to change to //string password = GetSHA1String(nonce + createdStr + userToken.Password); string password = userToken.Password; writer.WriteRaw(string.Format( "<{0}:UsernameToken u:Id=\"" + token.Id + "\" xmlns:u=\"http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd\">" + "<{0}:Username>" + userToken.UserName + "</{0}:Username>" + "<{0}:Password Type=\"http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-username-token-profile-1.0#PasswordText\">" + password + "</{0}:Password>" + "<{0}:Nonce EncodingType=\"http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-soap-message-security-1.0#Base64Binary\">" + nonce + "</{0}:Nonce>" + "<u:Created>" + createdStr + "</u:Created></{0}:UsernameToken>", tokennamespace)); } protected string GetSHA1String(string phrase) { SHA1CryptoServiceProvider sha1Hasher = new SHA1CryptoServiceProvider(); byte[] hashedDataBytes = sha1Hasher.ComputeHash(Encoding.UTF8.GetBytes(phrase)); return Convert.ToBase64String(hashedDataBytes); } } Realistically only the CustomTokenSerializer has any significant code in. The code there deals with actually serializing the custom credentials using low level XML semantics by writing output into an XML writer. I can't take credit for this code - most of the code comes from the MSDN forum post mentioned earlier - I made a few adjustments to simplify the nonce generation and also added some notes to allow for PasswordDigest generation. Per spec the nonce is nothing more than a unique value that's supposed to be 'random'. I'm thinking that this value can be any string that's unique and a GUID on its own probably would have sufficed. Comments on other posts that GUIDs can be potentially guessed are highly exaggerated to say the least IMHO. To satisfy even that aspect though I added the SHA1 encryption and binary decoding to give a more random value that would be impossible to 'guess'. The original example from the forum post used another level of encoding and decoding to string in between - but that really didn't accomplish anything but extra overhead. The header output generated from this looks like this:<s:Header> <o:Security s:mustUnderstand="1" xmlns:o="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd"> <o:UsernameToken u:Id="uuid-f43d8b0d-0ebb-482e-998d-f544401a3c91-1" xmlns:u="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd"> <o:Username>TheUsername</o:Username> <o:Password Type="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-username-token-profile-1.0#PasswordText">ThePassword</o:Password> <o:Nonce EncodingType="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-soap-message-security-1.0#Base64Binary" >PjVE24TC6HtdAnsf3U9c5WMsECY=</o:Nonce> <u:Created>2012-11-23T07:10:04.670Z</u:Created> </o:UsernameToken> </o:Security> </s:Header> which is exactly as it should be. Password Digest? In my case the password is passed in plain text over an SSL connection, so there's no digest required so I was done with the code above. Since I don't have a service handy that requires a password digest, I had no way of testing the code for the digest implementation, but here is how this is likely to work. If you need to pass a digest encoded password things are a little bit trickier. The password type namespace needs to change to: http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-username-token-profile-1.0#Digest and then the password value needs to be encoded. The format for password digest encoding is this: Base64(SHA-1(Nonce + Created + Password)) and it can be handled in the code above with this code (that's commented in the snippet above): string password = GetSHA1String(nonce + createdStr + userToken.Password); The entire WriteTokenCore method for digest code looks like this:protected override void WriteTokenCore(System.Xml.XmlWriter writer, System.IdentityModel.Tokens.SecurityToken token) { UserNameSecurityToken userToken = token as UserNameSecurityToken; string tokennamespace = "o"; DateTime created = DateTime.Now; string createdStr = created.ToString("yyyy-MM-ddThh:mm:ss.fffZ"); // unique Nonce value - encode with SHA-1 for 'randomness' // in theory the nonce could just be the GUID by itself string phrase = Guid.NewGuid().ToString(); var nonce = GetSHA1String(phrase); string password = GetSHA1String(nonce + createdStr + userToken.Password); writer.WriteRaw(string.Format( "<{0}:UsernameToken u:Id=\"" + token.Id + "\" xmlns:u=\"http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd\">" + "<{0}:Username>" + userToken.UserName + "</{0}:Username>" + "<{0}:Password Type=\"http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-username-token-profile-1.0#Digest\">" + password + "</{0}:Password>" + "<{0}:Nonce EncodingType=\"http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-soap-message-security-1.0#Base64Binary\">" + nonce + "</{0}:Nonce>" + "<u:Created>" + createdStr + "</u:Created></{0}:UsernameToken>", tokennamespace)); } I had no service to connect to to try out Digest auth - if you end up needing it and get it to work please drop a comment… How to use the custom Credentials The easiest way to use the custom credentials is to create the client in code. Here's a factory method I use to create an instance of my service client: public static RealTimeOnlineClient CreateRealTimeOnlineProxy(string url, string username, string password) { if (string.IsNullOrEmpty(url)) url = "https://notrealurl.com:443/cows/services/RealTimeOnline"; CustomBinding binding = new CustomBinding(); var security = TransportSecurityBindingElement.CreateUserNameOverTransportBindingElement(); security.IncludeTimestamp = false; security.DefaultAlgorithmSuite = SecurityAlgorithmSuite.Basic256; security.MessageSecurityVersion = MessageSecurityVersion.WSSecurity10WSTrustFebruary2005WSSecureConversationFebruary2005WSSecurityPolicy11BasicSecurityProfile10; var encoding = new TextMessageEncodingBindingElement(); encoding.MessageVersion = MessageVersion.Soap11; var transport = new HttpsTransportBindingElement(); transport.MaxReceivedMessageSize = 20000000; // 20 megs binding.Elements.Add(security); binding.Elements.Add(encoding); binding.Elements.Add(transport); RealTimeOnlineClient client = new RealTimeOnlineClient(binding, new EndpointAddress(url)); // to use full client credential with Nonce uncomment this code: // it looks like this might not be required - the service seems to work without it client.ChannelFactory.Endpoint.Behaviors.Remove<System.ServiceModel.Description.ClientCredentials>(); client.ChannelFactory.Endpoint.Behaviors.Add(new CustomCredentials()); client.ClientCredentials.UserName.UserName = username; client.ClientCredentials.UserName.Password = password; return client; } This returns a service client that's ready to call other service methods. The key item in this code is the ChannelFactory endpoint behavior modification that that first removes the original ClientCredentials and then adds the new one. The ClientCredentials property on the client is read only and this is the way it has to be added. Summary It's a bummer that WCF doesn't suport WSE Security authentication with nonce values out of the box. From reading the comments in posts/articles while I was trying to find a solution, I found that this feature was omitted by design as this protocol is considered unsecure. While I agree that plain text passwords are rarely a good idea even if they go over secured SSL connection as WSE Security does, there are unfortunately quite a few services (mosly Java services I suspect) that use this protocol. I've run into this twice now and trying to find a solution online I can see that this is not an isolated problem - many others seem to have struggled with this. It seems there are about a dozen questions about this on StackOverflow all with varying incomplete answers. Hopefully this post provides a little more coherent content in one place. Again I marvel at WCF and its breadth of support for protocol features it has in a single tool. And even when it can't handle something there are ways to get it working via extensibility. But at the same time I marvel at how freaking difficult it is to arrive at these solutions. I mean there's no way I could have ever figured this out on my own. It takes somebody working on the WCF team or at least being very, very intricately involved in the innards of WCF to figure out the interconnection of the various objects to do this from scratch. Luckily this is an older problem that has been discussed extensively online and I was able to cobble together a solution from the online content. I'm glad it worked out that way, but it feels dirty and incomplete in that there's a whole learning path that was omitted to get here… Man am I glad I'm not dealing with SOAP services much anymore. REST service security - even when using some sort of federation is a piece of cake by comparison :-) I'm sure once standards bodies gets involved we'll be right back in security standard hell…© Rick Strahl, West Wind Technologies, 2005-2012Posted in WCF Web Services Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

Read the article

Mark Messages As Read in the Outlook 2010 Reading Pane

- by Matthew Guay

Do you ever feel annoyed that Outlook 2010 doesn’t mark messages as Read as soon as you click and view them in the Reading Pane? Here we show you how to make Outlook mark them as read as soon as they’re opened. Mark as Read By default, Outlook will not mark a message as read until you select another message. This can be annoying, because if you read a message and immediately click Delete, it will show up as an unread message in our Deleted Items folder. Let’s change this to make Outlook mark messages as read as soon as we view them in the Reading Pane. Open Outlook and click File to open Backstage View, and select Options. In Options select Mail on the left menu, and under Outlook panes click on the Reading Pane button. Check the box Mark items as read when viewed in the Reading Pane to make Outlook mark your messages as read when you view them in the Reading Pane. By default, Outlook will only mark a message read after you’ve been reading it for 5 seconds, though you can change this. We set it to 0 seconds so our messages would be marked as read as soon as we select them. Click OK in both dialogs, and now your messages will be marked as read as soon as you select them in the reading pane, or soon after, depending on your settings. Conclusion Outlook 2010 is a great email client, but like most programs it has its quirks. This quick tip can help you get rid of one of Outlook’s annoying features, and make it work like you want it to. And, if you’re still using Outlook 2007, check out our article on how to Mark Messages as Read When Viewed in Outlook 2007. Similar Articles Productive Geek Tips Make Outlook 2007 Mark Items as Read When Viewed in Reading PaneMake Mail.app’s Reading Pane More Like OutlookIntegrate Twitter With Microsoft OutlookSort Your Emails by Conversation in Outlook 2010Find Emails With Attachments with Outlook 2007’s Instant Search TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 VMware Workstation 7 OpenDNS Guide Google TV The iPod Revolution Ultimate Boot CD can help when disaster strikes Windows Firewall with Advanced Security – How To Guides Sculptris 1.0, 3D Drawing app

Read the article

Lubuntu: neither shut-down nor restart works

- by Rantanplan

aI have a freshly installed Lubuntu 14.04.1 (installed with forcepae option on a laptop with Pentium M processor). The only problem that I have found so far is that I cannot shut-down or restart the laptop. It always continues showing "Lubuntu" and some dots. Pressing Esc it says wait-for-state stop/waiting * Stopping rsync daemon rsync [OK] * Asking all remaining processes to terminate… [OK] * Killing all remaining processes… [fail] ModemManager [597] : <info> Caught signal, shutting down… ModemManager [597] : <info> ModemManager is shut down nm-dispatcher.action: Could not get the system bus. Make sure the message bus daemon is running! Message: Did not receive a reply. Possible causes: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken. * Deactivating swap… [OK] * Will now halt The cursor remains blinking but the only way to switch it off is to hold the power-off key pressed for some seconds. I tried sudo shutdown -h now, sudo halt and sudo poweroff resulting in the same problem. I also tried to add acpi=force in GRUB_CMDLINE_LINUX_DEFAULT="quiet splash" in /etc/default/grub and run sudo update-grub; then, using the taskbar's shot-down button lead to a direct stop of the laptop equal to holding the power-off key pressed for some seconds. Next I followed the answer http://askubuntu.com/a/202481/288322. Now, I directly receive some messages during shut-down starting wait-for-state stop/waiting * Stopping rsync daemon rsync [OK] * Asking all remaining processes to terminate… [OK] [ 240.944277] INFO: task kworker/0:2:24: block for more than 120 seconds. [ 240.944461] Tainted: G S 3.13.0-34-generic #60-Ubuntu [ 240.944623] "echo 0 > /proc/sys/kernel/hung_tasks_timeout_secs" disables this message. followed by some more similar lines and then: * Killing all remaining processes… [fail] ModemManager [576] : <info> Caught signal, shutting down… nm-dispatcher.action: Caught signal 15, shutting down... ModemManager [576] : <info> ModemManager is shut down * Deactivating swap… [OK] * Will now halt [ 600.944276] INFO: task kworker/0:2:24: block for more than 120 seconds. [ 600.944458] Tainted: G S 3.13.0-34-generic #60-Ubuntu [ 600.944619] "echo 0 > /proc/sys/kernel/hung_tasks_timeout_secs" disables this message. Then, nothing more was coming during the next 5 minutes. If you know where can I find relevant error information, I will be happy to search for them.

Read the article

More useful Sql Server Serivce Broker Queries

- by ChrisD

SELECT 'Checking Broker Service Status...' IF (select Top 1 is_broker_enabled from sys.databases where name = 'NWMESSAGE')=1 SELECT ' Broker Service IS Enabled' -- Should return a 1. ELSE SELECT '** Broker Service IS DISABLED ***' /* If Is_Broker_enabled returns 0, uncomment and run this code ALTER DATABASE NWMESSAGE SET SINGLE_USER WITH ROLLBACK IMMEDIATE GO Alter Database NWMESSAGE Set enable_broker GO ALTER DATABASE NWDataChannel SET MULTI_USER GO */ SELECT 'Checking For Disabled Queues....' -- ensure the queues are enabled -- 0 indicates the queue is disabled. Select '** Receive Queue Disabled: '+name from sys.service_queues where is_receive_enabled = 0 --select [name], is_receive_enabled from sys.service_queues; /*If the queue is disabled, to enable it alter queue QUEUENAME with status=on; – replace QUEUENAME with the name of your queue */ -- Get General information about the queues --select * from sys.service_queues -- Get the message counts in each queue SELECT 'Checking Message Count for each Queue...' select q.name, p.rows from sys.objects as o join sys.partitions as p on p.object_id = o.object_id join sys.objects as q on o.parent_object_id = q.object_id join sys.service_queues sq on sq.name = q.name where p.index_id = 1 -- Ensure all the queue activiation sprocs are present SELECT 'Checking for Activation Stored Procedures....' SELECT '** Missing Procedure: '+q.name From sys.service_queues q Where NOT Exists(Select * from sysobjects where xtype='p' and name='activation_'+q.name) and q.activation_procedure is not null DECLARE @sprocs Table (Name Varchar(2000)) Insert into @sprocs Values ('Echo') Insert into @sprocs Values ('HTTP_POST') Insert into @sprocs Values ('InitializeRecipients') Insert into @sprocs Values ('sp_EnableRecipient') Insert into @sprocs Values ('sp_ProcessReceivedMessage') Insert into @sprocs Values ('sp_SendXmlMessage') SELECT 'Checking for required stored procedures...' SELECT '** Missing Procedure: '+s.name From @sprocs s Where NOT Exists(Select * from sysobjects where xtype='p' and name=s.name) GO -- Check the services Select 'Checking Recipient Message Services...' Select '** Missing Message Service:' + r.RecipientName +'MessageService' From Recipient r Where not exists (Select * from sys.services s where s.name COLLATE SQL_Latin1_General_CP1_CI_AS= r.RecipientName+'MessageService') DECLARE @svcs Table (Name Varchar(2000)) Insert into @svcs Values ('XmlMessageSendingService') SELECT '** Missing Service: '+s.name From @svcs s Where NOT Exists(Select * from sys.services where name=s.name COLLATE SQL_Latin1_General_CP1_CI_AS) GO /*** To Test a message send Run: sp_SendXmlMessage 'TSQLTEST', 'CommerceEngine','<Root><Text>Test</Text></Root>' */ Select CAST(message_body as XML) as xml, * From XmlMessageSendingQueue /*** clean out all queues declare @handle uniqueidentifier declare conv cursor for select conversation_handle from sys.conversation_endpoints open conv fetch next from conv into @handle while @@FETCH_STATUS = 0 Begin END Conversation @handle with cleanup fetch next from conv into @handle End close conv deallocate conv ***********************

Read the article

Are we queueing and serializing properly?

- by insta

We process messages through a variety of services (one message will touch probably 9 services before it's done, each doing a specific IO-related function). Right now we have a combination of the worst-case (XML data contract serialization) and best-case (in-memory MSMQ) for performance. The nature of the message means that our serialized data ends up about 12-15 kilobytes, and we process about 4 million messages per week. Persistent messages in MSMQ were too slow for us, and as the data grows we are feeling the pressure from MSMQ's memory-mapped files. The server is at 16GB of memory usage and growing, just for queueing. Performance also suffers when the memory usage is high, as the machine starts swapping. We're already doing the MSMQ self-cleanup behavior. I feel like there's a part we're doing wrong here. I tried using RavenDB to persist the messages and just queueing an identifier, but the performance there was very slow (1000 messages per minute, at best). I'm not sure if that's a result of using the development version or what, but we definitely need a higher throughput[1]. The concept worked very well in theory but performance was not up to the task. The usage pattern has one service acting as a router, which does all reads. The other services will attach information based on their 3rd party hook, and forward back to the router. Most objects are touched 9-12 times, although about 10% are forced to loop around in this system for awhile until the 3rd parties respond appropriately. The services right now account for this and have appropriate sleeping behaviors, as we utilize the priority field of the message for this reason. So, my question, is what is an ideal stack for message passing between discrete-but-LAN'ed machines in a C#/Windows environment? I would normally start with BinaryFormatter instead of XML serialization, but that's a rabbit hole if a better way is to offload serialization to a document store. Hence, my question. [1]: The nature of our business means the sooner we process messages, the more money we make. We've empirically proven that processing a message later in the week means we are less likely to make that money. While performance of "1000 per minute" sounds plenty fast, we really need that number upwards of 10k/minute. Just because I'm giving numbers in messages per week doesn't mean we have a whole week to process those messages.

Read the article

Neighbour table overflow on Linux hosts related to bridging and ipv6

- by tim

Note: I already have a workaround for this problem (as described below) so this is only a "want-to-know" question. I have a productive setup with around 50 hosts including blades running xen 4 and equallogics providing iscsi. All xen dom0s are almost plain Debian 5. The setup includes several bridges on every dom0 to support xen bridged networking. In total there are between 5 and 12 bridges on each dom0 servicing one vlan each. None of the hosts has routing enabled. At one point in time we moved one of the machines to a new hardware including a raid controller and so we installed an upstream 3.0.22/x86_64 kernel with xen patches. All other machines run debian xen-dom0-kernel. Since then we noticed on all hosts in the setup the following errors every ~2 minutes: [55888.881994] __ratelimit: 908 callbacks suppressed [55888.882221] Neighbour table overflow. [55888.882476] Neighbour table overflow. [55888.882732] Neighbour table overflow. [55888.883050] Neighbour table overflow. [55888.883307] Neighbour table overflow. [55888.883562] Neighbour table overflow. [55888.883859] Neighbour table overflow. [55888.884118] Neighbour table overflow. [55888.884373] Neighbour table overflow. [55888.884666] Neighbour table overflow. The arp table (arp -n) never showed more than around 20 entries on every machine. We tried the obvious tweaks and raised the /proc/sys/net/ipv4/neigh/default/gc_thresh* values. FInally to 16384 entries but no effect. Not even the interval of ~2 minutes changed which lead me to the conclusion that this is totally unrelated. tcpdump showed no uncommon ipv4 traffic on any interface. The only interesting finding from tcpdump were ipv6 packets bursting in like: 14:33:13.137668 IP6 fe80::216:3eff:fe1d:9d01 > ff02::1:ff1d:9d01: HBH ICMP6, multicast listener reportmax resp delay: 0 addr: ff02::1:ff1d:9d01, length 24 14:33:13.138061 IP6 fe80::216:3eff:fe1d:a8c1 > ff02::1:ff1d:a8c1: HBH ICMP6, multicast listener reportmax resp delay: 0 addr: ff02::1:ff1d:a8c1, length 24 14:33:13.138619 IP6 fe80::216:3eff:fe1d:bf81 > ff02::1:ff1d:bf81: HBH ICMP6, multicast listener reportmax resp delay: 0 addr: ff02::1:ff1d:bf81, length 24 14:33:13.138974 IP6 fe80::216:3eff:fe1d:eb41 > ff02::1:ff1d:eb41: HBH ICMP6, multicast listener reportmax resp delay: 0 addr: ff02::1:ff1d:eb41, length 24 which placed the idea in my mind that the problem maybe related to ipv6, since we have no ipv6 services in this setup. The only other hint was the coincidence of the host upgrade with the beginning of the problems. I powered down the host in question and the errors were gone. Then I subsequently took down the bridges on the host and when i took down (ifconfig down) one particularly bridge: br-vlan2159 Link encap:Ethernet HWaddr 00:26:b9:fb:16:2c inet6 addr: fe80::226:b9ff:fefb:162c/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:120 errors:0 dropped:0 overruns:0 frame:0 TX packets:9 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:5286 (5.1 KiB) TX bytes:726 (726.0 B) eth0.2159 Link encap:Ethernet HWaddr 00:26:b9:fb:16:2c inet6 addr: fe80::226:b9ff:fefb:162c/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1801 errors:0 dropped:0 overruns:0 frame:0 TX packets:20 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:126228 (123.2 KiB) TX bytes:1464 (1.4 KiB) bridge name bridge id STP enabled interfaces ... br-vlan2158 8000.0026b9fb162c no eth0.2158 br-vlan2159 8000.0026b9fb162c no eth0.2159 The errors went away again. As you can see the bridge holds no ipv4 address and it's only member is eth0.2159 so no traffic should cross it. Bridge and interface .2159 / .2157 / .2158 which are in all aspects identical apart from the vlan they are connected to had no effect when taken down. Now I disabled ipv6 on the entire host via sysctl net.ipv6.conf.all.disable_ipv6 and rebooted. After this even with bridge br-vlan2159 enabled no errors occur. Any ideas are welcome.

Read the article

JBoss https on port other than 8080 not working

- by MilindaD

We have a server with two JBoss instances where one runs on 8080, the other on 8081. We need to have HTTPS enabled for the 8081 server, firstly we tried enabling https on the 8080 port instance by generating the keystore and editing the server.xml and it successfully worked. However when we tried the same thing for 8081 it did not, note that we removed https for the 8080 server first before enabling it for 8081. This is what was used for both server.xml for 8080 and 8081. The only difference was that the port was changed from 8080 to 8081 when trying to enable https for 8081 port instance. What am I doing wrong and what needs to be changed? NOTE : When I meant enabled for 8080 I meant when you visit https:// URL:8484 you will actually be visiting the 8080 port instance. However when ssl is enabled for 8081 and I visit https:// URL:8484 I get that the web page is unavailable. COMMENTLESS VERSION <Server> <Listener className="org.apache.catalina.core.AprLifecycleListener" SSLEngine="on" /> <Listener className="org.apache.catalina.core.JasperListener" /> <Service name="jboss.web">  <Connector port="8080" address="${jboss.bind.address}" maxThreads="350" maxHttpHeaderSize="8192" emptySessionPath="true" protocol="HTTP/1.1" enableLookups="false" redirectPort="8443" acceptCount="100" connectionTimeout="20000" disableUploadTimeout="true" compression="on" ompressableMimeType="text/html,text/css,text/javascript,application/json,text/xml,text/plain,application/x-javascript,application/javascript"/> <Connector port="8443" protocol="HTTP/1.1" SSLEnabled="true" maxThreads="150" scheme="https" secure="true" clientAuth="false" sslProtocol="TLS" address="${jboss.bind.address}" keystoreFile="${jboss.server.home.dir}/conf/supun1.keystore" keystorePass="aaaaaa" truststoreFile="${jboss.server.home.dir}/conf/supun1.keystore" truststorePass="aaaaaa" />  <Connector port="8009" address="${jboss.bind.address}" protocol="AJP/1.3" emptySessionPath="true" enableLookups="false" redirectPort="8443" /> <Engine name="jboss.web" defaultHost="localhost" jvmRoute="khms1"> <Realm className="org.jboss.web.tomcat.security.JBossSecurityMgrRealm" certificatePrincipal="org.jboss.security.auth.certs.SubjectDNMapping" allRolesMode="authOnly" /> <Host name="localhost" autoDeploy="false" deployOnStartup="false" deployXML="false" configClass="org.jboss.web.tomcat.security.config.JBossContextConfig" > <Valve className="org.jboss.web.tomcat.service.sso.ClusteredSingleSignOn" /> <Valve className="org.jboss.web.tomcat.service.jca.CachedConnectionValve" cachedConnectionManagerObjectName="jboss.jca:service=CachedConnectionManager" transactionManagerObjectName="jboss:service=TransactionManager" /> </Host> </Engine> </Service> </Server> WITH COMMENTS VERSION <Server>  <Listener className="org.apache.catalina.core.AprLifecycleListener" SSLEngine="on" />  <Listener className="org.apache.catalina.core.JasperListener" />  <Service name="jboss.web">  <Connector port="8080" address="${jboss.bind.address}" maxThreads="350" maxHttpHeaderSize="8192" emptySessionPath="true" protocol="HTTP/1.1" enableLookups="false" redirectPort="8443" acceptCount="100" connectionTimeout="20000" disableUploadTimeout="true" compression="on" ompressableMimeType="text/html,text/css,text/javascript,application/json,text/xml,text/plain,application/x-javascript,application/javascript"/>   <Connector port="8443" protocol="HTTP/1.1" SSLEnabled="true" maxThreads="150" scheme="https" secure="true" clientAuth="false" sslProtocol="TLS" address="${jboss.bind.address}" keystoreFile="${jboss.server.home.dir}/conf/supun1.keystore" keystorePass="aaaaaa" truststoreFile="${jboss.server.home.dir}/conf/supun1.keystore" truststorePass="aaaaaa" />  <Connector port="8009" address="${jboss.bind.address}" protocol="AJP/1.3" emptySessionPath="true" enableLookups="false" redirectPort="8443" /> <Engine name="jboss.web" defaultHost="localhost" jvmRoute="khms1">  <Realm className="org.jboss.web.tomcat.security.JBossSecurityMgrRealm" certificatePrincipal="org.jboss.security.auth.certs.SubjectDNMapping" allRolesMode="authOnly" />  <Host name="localhost" autoDeploy="false" deployOnStartup="false" deployXML="false" configClass="org.jboss.web.tomcat.security.config.JBossContextConfig" >        <Valve className="org.jboss.web.tomcat.service.sso.ClusteredSingleSignOn" />  <Valve className="org.jboss.web.tomcat.service.jca.CachedConnectionValve" cachedConnectionManagerObjectName="jboss.jca:service=CachedConnectionManager" transactionManagerObjectName="jboss:service=TransactionManager" /> </Host> </Engine> </Service> </Server>

Read the article

WinForms Menu Toolstrip Get Status

- by Yeti

So I have a project where there is some automatic initialization going on through some classes that are created automatically as global variables (yeah they are static instances). At a point inside this (it has no relation with the C# GUI for the user, so it isn't derived from any C# class) I need to see if a flag is set or not. I use toolstrip menu with checked and unchecked status in order to set or unset the flag. The problem is that I have difficulties to see if the flag is checked or not from this static class. My class is inside a different project/namespace and a DLL is created what later is linked to the GUI of the application. The GUI depends from this Manager class so making the Manager class to depend from the GUI is not an option. Nevertheless, I should be able to see its state knowing its name or through some other means. I have tried the following: if(Application.OpenForms[1].Owner.Controls["useLocalImageForInitToolStripMenuItem"].Enabled) { }; Now the problem is that on the upper code snippet I get a nasty error. So how do I do this? The toolstrip menu: The error: See the end of this message for details on invoking just-in-time (JIT) debugging instead of this dialog box. ***** Exception Text ******* System.ArgumentOutOfRangeException: Index was out of range. Must be non-negative and less than the size of the collection. Parameter name: index at System.Collections.ArrayList.get_Item(Int32 index) at System.Windows.Forms.FormCollection.get_Item(Int32 index) at Manager.MyMainManager.MyMainManager.RealTimeInit() in C:\Dropbox\My Dropbox\Public\Program Code\RoboCup\Manager\MyMainManager\MyMainManager.cs:line 494 at mainApp.MainForm.ButtonInitClick(Object sender, EventArgs e) in C:\Dropbox\My Dropbox\Public\Program Code\RoboCup\mainApp\MainForm.cs:line 389 at System.Windows.Forms.Control.OnClick(EventArgs e) at System.Windows.Forms.Button.OnClick(EventArgs e) at System.Windows.Forms.Button.OnMouseUp(MouseEventArgs mevent) at System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks) at System.Windows.Forms.Control.WndProc(Message& m) at System.Windows.Forms.ButtonBase.WndProc(Message& m) at System.Windows.Forms.Button.WndProc(Message& m) at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m) at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m) at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)

Read the article

Speech recognition plugin Runtime Error: Unhandled Exception. What could possibly cause it?

- by manuel

I'm writing a plugin (dll file) for speech recognition, and I'm creating a WinForm as its interface/dialog. When I run the plugin and click a button to start the initialization, I get an unhandled exception. Below is the complete details of it. See the end of this message for details on invoking just-in-time (JIT) debugging instead of this dialog box. ***** Exception Text ******* System.ArgumentException: Value does not fall within the expected range. at System.Speech.Internal.SapiInterop.SapiProxy.MTAThread.Invoke2(VoidDelegate pfn) at System.Speech.Internal.SapiInterop.SapiRecognizer.SetInput(Object input, Boolean allowFormatChanges) at System.Speech.Recognition.RecognizerBase.SetInputToDefaultAudioDevice() at System.Speech.Recognition.SpeechRecognitionEngine.SetInputToDefaultAudioDevice() at gen_myplugin.Dialog.init() at gen_myplugin.Dialog.btnSpeak_Click(Object sender, EventArgs e) at System.Windows.Forms.Control.OnClick(EventArgs e) at System.Windows.Forms.Button.OnClick(EventArgs e) at System.Windows.Forms.Button.OnMouseUp(MouseEventArgs mevent) at System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks) at System.Windows.Forms.Control.WndProc(Message& m) at System.Windows.Forms.ButtonBase.WndProc(Message& m) at System.Windows.Forms.Button.WndProc(Message& m) at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m) at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m) at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam) ***** Loaded Assemblies ******* mscorlib Assembly Version: 2.0.0.0 Win32 Version: 2.0.50727.3603 (GDR.050727-3600) CodeBase: file:///c:/WINDOWS/Microsoft.NET/Framework/v2.0.50727/mscorlib.dll ---------------------------------------- gen_speechquery Assembly Version: 1.0.3755.878 Win32 Version: CodeBase: file:///C:/Program%20Files/Winamp/Plugins/gen_speechquery.dll ---------------------------------------- msvcm90 Assembly Version: 9.0.30729.1 Win32 Version: 9.00.30729.1 CodeBase: file:///C:/WINDOWS/WinSxS/x86_Microsoft.VC90.CRT_1fc8b3b9a1e18e3b_9.0.30729.1_x-ww_6f74963e/msvcm90.dll ---------------------------------------- System.Windows.Forms Assembly Version: 2.0.0.0 Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000) CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Windows.Forms/2.0.0.0__b77a5c561934e089/System.Windows.Forms.dll ---------------------------------------- System Assembly Version: 2.0.0.0 Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000) CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll ---------------------------------------- System.Drawing Assembly Version: 2.0.0.0 Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000) CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Drawing/2.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll ---------------------------------------- System.Speech Assembly Version: 3.0.0.0 Win32 Version: 3.0.6920.1109 (lh_tools_devdiv_wpf.071009-1109) CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Speech/3.0.0.0__31bf3856ad364e35/System.Speech.dll ***** JIT Debugging ******* To enable just-in-time (JIT) debugging, the .config file for this application or computer (machine.config) must have the jitDebugging value set in the system.windows.forms section. The application must also be compiled with debugging enabled. For example: When JIT debugging is enabled, any unhandled exception will be sent to the JIT debugger registered on the computer rather than be handled by this dialog box.

Read the article

C++: Implementing Named Pipes using the Win32 API

- by Mike Pateras

I'm trying to implement named pipes in C++, but either my reader isn't reading anything, or my writer isn't writing anything (or both). Here's my reader: int main() { HANDLE pipe = CreateFile(GetPipeName(), GENERIC_READ, 0, NULL, OPEN_EXISTING, FILE_FLAG_OVERLAPPED, NULL); char data[1024]; DWORD numRead = 1; while (numRead >= 0) { ReadFile(pipe, data, 1024, &numRead, NULL); if (numRead > 0) cout << data; } return 0; } LPCWSTR GetPipeName() { return L"\\\\.\\pipe\\LogPipe"; } And here's my writer: int main() { HANDLE pipe = CreateFile(GetPipeName(), GENERIC_WRITE, 0, NULL, OPEN_EXISTING, FILE_FLAG_OVERLAPPED, NULL); string message = "Hi"; WriteFile(pipe, message.c_str(), message.length() + 1, NULL, NULL); return 0; } LPCWSTR GetPipeName() { return L"\\\\.\\pipe\\LogPipe"; } Does that look right? numRead in the reader is always 0, for some reason, and it reads nothing but 1024 -54's (some weird I character). Solution: Reader (Server): while (true) { HANDLE pipe = CreateNamedPipe(GetPipeName(), PIPE_ACCESS_INBOUND | PIPE_ACCESS_OUTBOUND , PIPE_WAIT, 1, 1024, 1024, 120 * 1000, NULL); if (pipe == INVALID_HANDLE_VALUE) { cout << "Error: " << GetLastError(); } char data[1024]; DWORD numRead; ConnectNamedPipe(pipe, NULL); ReadFile(pipe, data, 1024, &numRead, NULL); if (numRead > 0) cout << data << endl; CloseHandle(pipe); } Writer (client): HANDLE pipe = CreateFile(GetPipeName(), GENERIC_READ | GENERIC_WRITE, 0, NULL, OPEN_EXISTING, 0, NULL); if (pipe == INVALID_HANDLE_VALUE) { cout << "Error: " << GetLastError(); } string message = "Hi"; cout << message.length(); DWORD numWritten; WriteFile(pipe, message.c_str(), message.length(), &numWritten, NULL); return 0; The server blocks until it gets a connected client, reads what the client writes, and then sets itself up for a new connection, ad infinitum. Thanks for the help, all!

Read the article

Perl regex matching output from `w -hs` command

- by Bushman

I'm trying to write a Perl script that will work better with KDE's kwrited, which, as far as I can tell, is connected to a pts and puts every line it receives through the KDE system tray notifications, with the title "KDE write daemon". Unfortunately, it makes a separate notification for each and every line, so it spams up the system tray with multiline messages on regular old write, and for some reason it cuts off the entire last line of the message when using wall (One-line messages are also goners.). I was also hoping to make it so that it could broadcast across a LAN with thick clients. Before starting on that (which would require ssh, of course), I tried to make an ssh-less version to make sure it works. Unfortunately, it doesn't. perl ./write.pl "Testing 1 2 3" where the following is the contents of ./write.pl: #!/usr/bin/perl use strict; use warnings; my $message = ""; my $device = ""; my $possibledevice = '`w -hs | grep "/usr/bin/kwrited"`'; #Where is kwrited? $possibledevice =~ s/^[^\t][\t]//; $possibledevice =~ s/[\t][^\t][\t ]\/usr\/bin\/kwrited$//; $possibledevice = '/dev/'.$possibledevice; unless ($possibledevice eq "") { $device = $possibledevice; } if ($ARGV[0] ne "") { $message = $ARGV[0]; $device = $ARGV[1]; } else { $device = $ARGV[0] unless $ARGV[0] eq ""; while (<STDIN>) { chomp; $message .= <STDIN>; } } if ($message ne "") { system "echo \'$message\' > $device"; } else { print "Error: empty message" } produces the following error: $ perl write.pl "Testing 1 2 3" Use of uninitialized value $device in concatenation (.) or string at write.pl line 29. sh: -c: line 0: syntax error near unexpected token `newline' sh: -c: line 0: `echo 'foo' > ' Somehow, the regular expressions and/or the backtick escape in processing $possibledevice are not working properly, because where kwrited is connected to /dev/pts/0, the following works perfectly: $ perl write.pl "Testing 1 2 3" /dev/pts/0

Read the article

Can I make Axis2 generate a WSDL with 'unwrapped' types?

- by Bedwyr Humphreys

I'm trying to consume a hello world AXIS2 SOAP web service using a PHP client. The Java class is written in Netbeans and the AXIS2 aar file is generated using the Netbeans AXIS2 plugin. You've all seen it before but here's the java class: public class SOAPHello { public String sayHello(String username) { return "Hello, "+username; } } The wsdl genereated by AXIS2 seems to wrap all the parameters so that when I consume the service i have to use a crazy PHP script like this: $client = new SoapClient("http://myhost:8080/axis2/services/SOAPHello?wsdl"); $parameters["username"] = "Dave"; $response = $client->sayHello($parameters)->return; echo $response."!"; When all I really want to do is echo $client->sayHello("Dave")."!"; My question is two-fold: why is this happening? and what can I do to stop it? :) Here's are the types, message and porttype sections of the generated wsdl: <wsdl:types> <xs:schema attributeFormDefault="qualified" elementFormDefault="qualified" targetNamespace="http://soap.axis2.myhost.co.uk"> <xs:element name="sayHello"> <xs:complexType> <xs:sequence> <xs:element minOccurs="0" name="username" nillable="true" type="xs:string"/> </xs:sequence> </xs:complexType> </xs:element> <xs:element name="sayHelloResponse"> <xs:complexType> <xs:sequence> <xs:element minOccurs="0" name="return" nillable="true" type="xs:string"/> </xs:sequence> </xs:complexType> </xs:element> </xs:schema> </wsdl:types> <wsdl:message name="sayHelloRequest"> <wsdl:part name="parameters" element="ns:sayHello"/> </wsdl:message> <wsdl:message name="sayHelloResponse"> <wsdl:part name="parameters" element="ns:sayHelloResponse"/> </wsdl:message> <wsdl:portType name="SOAPHelloPortType"> <wsdl:operation name="sayHello"> <wsdl:input message="ns:sayHelloRequest" wsaw:Action="urn:sayHello"/> <wsdl:output message="ns:sayHelloResponse" wsaw:Action="urn:sayHelloResponse"/> </wsdl:operation> </wsdl:portType>

Read the article

ObjectDisposedException from core .NET code

- by John

I'm having this issue with a live app. (Unfortunately this is post-mortem debugging - I only have this stack trace. I've never seen this personally, nor am I able to reproduce). I get this Exception: message=Cannot access a disposed object. Object name: 'Button'. exceptionMessage=Cannot access a disposed object. Object name: 'Button'. exceptionDetails=System.ObjectDisposedException: Cannot access a disposed object. Object name: 'Button'. at System.Windows.Forms.Control.CreateHandle() at System.Windows.Forms.Control.get_Handle() at System.Windows.Forms.Control.PointToScreen(Point p) at System.Windows.Forms.Button.OnMouseUp(MouseEventArgs mevent) at System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks) at System.Windows.Forms.Control.WndProc(Message& m) at System.Windows.Forms.ButtonBase.WndProc(Message& m) at System.Windows.Forms.Button.WndProc(Message& m) at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m) at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m) at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam) exceptionSource=System.Windows.Forms exceptionTargetSite=Void CreateHandle() It looks like a mouse event is arriving at a form after the form has been disposed. Note there is none of my code in this stack trace. The only weird (?) thing I'm doing, is that I do tend to Dispose() Forms quite aggressively when I use them with ShowModal() (see "Aside" below). But I only do this after ShowModal() has returned (that should be safe right)? I think I read that events might be queued up in the event queue, but I can't believe this would be the problem. I mean surely the framework must be tolerant to old messages? I can well imagine that under stress messages might back-log and surely the window might go away at any time? Any ideas? If you could even suggest ways of reproducing, that might be useful. John Aside: TBH I've never quite understood whether calling Dispose() after Form.ShowDialog() is strictly necessary - the MSDN docs for ShowDialog() are to my mind a bit ambiguous.

Read the article

Long Running Stored Proc - Report Progress Using BackgroundWorker & Timer

- by daveywc

While a long running stored proc (RMR_Seek) is executing (called via a Linq-To-SQL data context) I am trying to call another stored proc (RMR_GetLatestModelMessage) to check a table for the latest status message. The long running stored proc updates the table in question with status messages as it executes. I want to display the status message on a message panel to advise the user of the status of the execution of Proc_A. For various reasons it is not possible to determine how long RMR_Seek will take to execute so a progress bar with percentage increments is not feasible. I thought I'd found the way to do it by calling the long running stored proc from in a BackgroundWorker process DoWork event handler. This worked fine and allowed me to update my message panel with some dummy status messages that were NOT obtained via Proc_B while Proc_A was running. However now that I have tried to implement this fully by calling Proc_B to obtain the status messages I am running into problems that seem to be related to the mix of the backgroundworker and my System.Windows.Forms.Timer. An extract of the code I am using is below. I have tried many different ways around this but each one seems to present its own set of problems. The code below is problematic in the bw_DoWork event. The RMR_Seek stored proc gets called but does not execute properly - it also seems to be inconsistent as to whether _IsCompleted gets set to true. I'm sure there is a better way to achieve what I am trying to do. private bool _IsCompleted; private void RunRevenueSeek() { if (_SelectedModel == null) { MessageBox.Show("Please select a model from the list and try again.", "Model Generation", MessageBoxButtons.OK, MessageBoxIcon.Information); } else { var bw = new BackgroundWorker(); bw.DoWork += new DoWorkEventHandler(bw_DoWork); ProgressPanelControl.Visible = true; _IsCompleted = false; MessageTimer.Start(); // Has an interval of 3000 bw.RunWorkerAsync(); ProgressLabelControl.Text = "Refreshing Data"; this.Update(); ...more code goes here } } private void bw_DoWork(object sender, DoWorkEventArgs e) { using (var dc = new RevMdlrDataClassesDataContext()) { dc.CommandTimeout = 300; dc.RMR_Seek(_SelectedModel.ModelSet_ID); _IsCompleted = true; } } private void MessageTimer_Tick(object sender, EventArgs e) { string message = ""; if (_IsCompleted) { MessageTimer.Stop(); } else { using (var dc = new RevMdlrDataClassesDataContext()) { dc.CommandTimeout = 300; dc.RMR_GetLatestModelMessage(_SelectedModel.ModelSet_ID, ref message); ProgressLabelControl.Text = message; this.Update(); } } }

Read the article

Serious Memory Clash: Variables clashing in C

- by Soham

int main(int argc, char*argv[]) { Message* newMessage; Asset* Check; //manipulation and initialization of Check, so that it holds proper values. newMessage = parser("N,2376,01/02/2011 09:15:01.342,JPASSOCIAT FUTSTK 24FEB2011,B,84.05,2000,0,0",newMessage); // MessageProcess(newMessage,AssetMap); printf("LAST TRADE ADDRESS %p LAST TRADE TIME %s\n",Check->TradeBook,Check->Time); } Message* parser(char *message,Message* new_Message) { char a[9][256]; char* tmp =message; bool inQuote=0; int counter=0; int counter2=0; new_Message = (Message*)malloc(sizeof(Message)); while(*tmp!='\0') { switch(*tmp) { case ',': if(!inQuote) { a[counter][counter2]='\0'; counter++; counter2=0; } break; case '"': inQuote=!inQuote; break; default: a[counter][counter2]=*tmp; counter2++; break; } tmp++; } a[counter][counter2]='\0'; new_Message->type = *a[0]; new_Message->Time = &a[2][11]; new_Message->asset = a[3]; if(*a[4]=='S') new_Message->BS = 0; else new_Message->BS = 1; new_Message->price1=atof(a[5]); new_Message->shares1=atol(a[6]); new_Message->price2=atof(a[7]); new_Message->shares2=atol(a[8]); new_Message->idNum = atoi(a[1]); return(new_Message); } Here there is a serious memory clash, in two variables of different scope. I have investigated using gdb and it seems the address of new_Message->Time is equalling to the address of Check->Time. They both are structures of different types I am trying to resolve this issue, because, when parser changes the value of new_Message->Time it manipulates the contents of Check-Time Please do suggest how to solve this problem. I have lost(spent) around 10 hours and counting to resolve this issue, and tons of hair. Soham

Read the article

Providing updating suggestions list with javascript, php and ajax

- by user1104854

I'm trying to modify this example on making a live updating list to integrate it with my API. So, instead of using GET on the page with the form, I'd like to send it to that page via a function call. So, here's my form // message.php //function to display the hint sent from gethint.php function message_hint($hint){ echo $hint; } //displays the form for sending messages function send_message_form($to_user,$title,$message){ include 'gethint.php'; ?> <table> <form name = "send_message" method="post"> <td>Send A Message</td> <tr><td>To:</td><td><input type = "text" size="50" name="to_user" id = "to_user" value ="<? echo $to_user; ?>" onkeyup="showHint(this.value)"></td></tr> <tr><td>Title:</td><td><input type = "text" size="50" name="message_title"></td></tr> <tr><td>Message:</td><td><textarea rows="4" cols="50" name="message_details"></textarea></td></tr> <tr><td><input type="submit" name="submit_message"></td></tr> </table> </form> <? } Here's the head of message.php <head> <script> function showHint(str){ var to_user = document.getElementById("to_user").value //to_user is the id of the textbox if (str.length==0){ to_user.innerHTML=""; return; } if (window.XMLHttpRequest){// code for IE7+, Firefox, Chrome, Opera, Safari xmlhttp=new XMLHttpRequest(); }else{// code for IE6, IE5 xmlhttp=new ActiveXObject("Microsoft.XMLHTTP"); } xmlhttp.onreadystatechange=function(){ if (xmlhttp.readyState==4 && xmlhttp.status==200){ alert(to_user) //properly displays the name via alert box to_user.innerHTML=xmlhttp.responseText; } } xmlhttp.open("GET","gethint.php?q="+to_user,true); xmlhttp.send(); } </script> </head> The page gethint.php is exactly the same, aside from this at the bottom. //echo $response //this was the original output $message = new messages; $message->message_hint($response);

Read the article

C++ HW - defining classes - objects that have objects of other class problem in header file (out of

- by kitfuntastik

This is my first time with much of this code. With this instancepool.h file below I get errors saying I can't use vector (line 14) or have instance& as a return type (line 20). It seems it can't use the instance objects despite the fact that I have included them. #ifndef _INSTANCEPOOL_H #define _INSTANCEPOOL_H #include "instance.h" #include <iostream> #include <string> #include <vector> #include <stdlib.h> using namespace std; class InstancePool { private: unsigned instances;//total number of instance objects vector<instance> ipp;//the collection of instance objects, held in a vector public: InstancePool();//Default constructor. Creates an InstancePool object that contains no Instance objects InstancePool(const InstancePool& original);//Copy constructor. After copying, changes to original should not affect the copy that was created. ~InstancePool();//Destructor unsigned getNumberOfInstances() const;//Returns the number of Instance objects the the InstancePool contains. const instance& operator[](unsigned index) const; InstancePool& operator=(const InstancePool& right);//Overloading the assignment operator for InstancePool. friend istream& operator>>(istream& in, InstancePool& ip);//Overloading of the >> operator. friend ostream& operator<<(ostream& out, const InstancePool& ip);//Overloading of the << operator. }; #endif Here is the instance.h : #ifndef _INSTANCE_H #define _INSTANCE_H ///////////////////////////////#include "instancepool.h" #include <iostream> #include <string> #include <stdlib.h> using namespace std; class Instance { private: string filenamee; bool categoryy; unsigned featuress; unsigned* featureIDD; unsigned* frequencyy; string* featuree; public: Instance (unsigned features = 0);//default constructor unsigned getNumberOfFeatures() const; //Returns the number of the keywords that the calling Instance object can store. Instance(const Instance& original);//Copy constructor. After copying, changes to the original should not affect the copy that was created. ~Instance() { delete []featureIDD; delete []frequencyy; delete []featuree;}//Destructor. void setCategory(bool category){categoryy = category;}//Sets the category of the message. Spam messages are represented with true and and legit messages with false.//easy bool getCategory() const;//Returns the category of the message. void setFileName(const string& filename){filenamee = filename;}//Stores the name of the file (i.e. “spam/spamsga1.txt”, like in 1st assignment) in which the message was initially stored.//const string& trick? string getFileName() const;//Returns the name of the file in which the message was initially stored. void setFeature(unsigned i, const string& feature, unsigned featureID,unsigned frequency) {//i for array positions featuree[i] = feature; featureIDD[i] = featureID; frequencyy[i] = frequency; } string getFeature(unsigned i) const;//Returns the keyword which is located in the ith position.//const string unsigned getFeatureID(unsigned i) const;//Returns the code of the keyword which is located in the ith position. unsigned getFrequency(unsigned i) const;//Returns the frequency Instance& operator=(const Instance& right);//Overloading of the assignment operator for Instance. friend ostream& operator<<(ostream& out, const Instance& inst);//Overloading of the << operator for Instance. friend istream& operator>>(istream& in, Instance& inst);//Overloading of the >> operator for Instance. }; #endif Also, if it is helpful here is instance.cpp: // Here we implement the functions of the class apart from the inline ones #include "instance.h" #include <iostream> #include <string> #include <stdlib.h> using namespace std; Instance::Instance(unsigned features) { //Constructor that can be used as the default constructor. featuress = features; if (features == 0) return; featuree = new string[featuress]; // Dynamic memory allocation. featureIDD = new unsigned[featuress]; frequencyy = new unsigned[featuress]; return; } unsigned Instance::getNumberOfFeatures() const {//Returns the number of the keywords that the calling Instance object can store. return featuress;} Instance::Instance(const Instance& original) {//Copy constructor. filenamee = original.filenamee; categoryy = original.categoryy; featuress = original.featuress; featuree = new string[featuress]; for(unsigned i = 0; i < featuress; i++) { featuree[i] = original.featuree[i]; } featureIDD = new unsigned[featuress]; for(unsigned i = 0; i < featuress; i++) { featureIDD[i] = original.featureIDD[i]; } frequencyy = new unsigned[featuress]; for(unsigned i = 0; i < featuress; i++) { frequencyy[i] = original.frequencyy[i];} } bool Instance::getCategory() const { //Returns the category of the message. return categoryy;} string Instance::getFileName() const { //Returns the name of the file in which the message was initially stored. return filenamee;} string Instance::getFeature(unsigned i) const { //Returns the keyword which is located in the ith position.//const string return featuree[i];} unsigned Instance::getFeatureID(unsigned i) const { //Returns the code of the keyword which is located in the ith position. return featureIDD[i];} unsigned Instance::getFrequency(unsigned i) const { //Returns the frequency return frequencyy[i];} Instance& Instance::operator=(const Instance& right) { //Overloading of the assignment operator for Instance. if(this == &right) return *this; delete []featureIDD; delete []frequencyy; delete []featuree; filenamee = right.filenamee; categoryy = right.categoryy; featuress = right.featuress; featureIDD = new unsigned[featuress]; frequencyy = new unsigned[featuress]; featuree = new string[featuress]; for(unsigned i = 0; i < featuress; i++) { featureIDD[i] = right.featureIDD[i]; } for(unsigned i = 0; i < featuress; i++) { frequencyy[i] = right.frequencyy[i]; } for(unsigned i = 0; i < featuress; i++) { featuree[i] = right.featuree[i]; } return *this; } ostream& operator<<(ostream& out, const Instance& inst) {//Overloading of the << operator for Instance. out << endl << "<message file=" << '"' << inst.filenamee << '"' << " category="; if (inst.categoryy == 0) out << '"' << "legit" << '"'; else out << '"' << "spam" << '"'; out << " features=" << '"' << inst.featuress << '"' << ">" <<endl; for (int i = 0; i < inst.featuress; i++) { out << "<feature id=" << '"' << inst.featureIDD[i] << '"' << " freq=" << '"' << inst.frequencyy[i] << '"' << "> " << inst.featuree[i] << " </feature>"<< endl; } out << "</message>" << endl; return out; } istream& operator>>(istream& in, Instance& inst) { //Overloading of the >> operator for Instance. string word; string numbers = ""; string filenamee2 = ""; bool categoryy2 = 0; unsigned featuress2; string featuree2; unsigned featureIDD2; unsigned frequencyy2; unsigned i; unsigned y; while(in >> word) { if (word == "<message") {//if at beginning of message in >> word;//grab filename word for (y=6; word[y]!='"'; y++) {//pull out filename from between quotes filenamee2 += word[y];} in >> word;//grab category word if (word[10] == 's') categoryy2 = 1; in >> word;//grab features word for (y=10; word[y]!='"'; y++) { numbers += word[y];} featuress2 = atoi(numbers.c_str());//convert string of numbers to integer Instance tempp2(featuress2);//make a temporary Instance object to hold values read in tempp2.setFileName(filenamee2);//set temp object to filename read in tempp2.setCategory(categoryy2); for (i=0; i<featuress2; i++) {//loop reading in feature reports for message in >> word >> word >> word;//skip two words numbers = "";//reset numbers string for (int y=4; word[y]!='"'; y++) {//grab feature ID numbers += word[y];} featureIDD2 = atoi(numbers.c_str()); in >> word;// numbers = ""; for (int y=6; word[y]!='"'; y++) {//grab frequency numbers += word[y];} frequencyy2 = atoi(numbers.c_str()); in >> word;//grab actual feature string featuree2 = word; tempp2.setFeature(i, featuree2, featureIDD2, frequencyy2); }//all done reading in and setting features in >> word;//read in last part of message : </message> inst = tempp2;//set inst (reference) to tempp2 (tempp2 will be destroyed at end of function call) return in; } } } and instancepool.cpp: // Here we implement the functions of the class apart from the inline ones #include "instancepool.h" #include "instance.h" #include <iostream> #include <string> #include <vector> #include <stdlib.h> using namespace std; InstancePool::InstancePool()//Default constructor. Creates an InstancePool object that contains no Instance objects { instances = 0; ipp.clear(); } InstancePool::~InstancePool() { ipp.clear();} InstancePool::InstancePool(const InstancePool& original) {//Copy constructor. instances = original.instances; for (int i = 0; i<instances; i++) { ipp.push_back(original.ipp[i]); } } unsigned InstancePool::getNumberOfInstances() const {//Returns the number of Instance objects the the InstancePool contains. return instances;} const Instance& InstancePool::operator[](unsigned index) const {//Overloading of the [] operator for InstancePool. return ipp[index];} InstancePool& InstancePool::operator=(const InstancePool& right) {//Overloading the assignment operator for InstancePool. if(this == &right) return *this; ipp.clear(); instances = right.instances; for(unsigned i = 0; i < instances; i++) { ipp.push_back(right.ipp[i]); } return *this; } istream& operator>>(istream& in, InstancePool& ip) {//Overloading of the >> operator. ip.ipp.clear(); string word; string numbers; int total;//int to hold total number of messages in collection while(in >> word) { if (word == "<messagecollection"){ in >> word;//reads in total number of all messages for (int y=10; word[y]!='"'; y++){ numbers = ""; numbers += word[y]; } total = atoi(numbers.c_str()); for (int x = 0; x<total; x++) {//do loop for each message in collection in >> ip.ipp[x];//use instance friend function and [] operator to fill in values and create Instance objects and read them intot he vector } } } } ostream& operator<<(ostream& out, const InstancePool& ip) {//Overloading of the << operator. out << "<messagecollection messages=" << '"' << '>' << ip.instances << '"'<< endl << endl; for (int z=0; z<ip.instances; z++) { out << ip[z];} out << endl<<"</messagecollection>\n"; } This code is currently not writing to files correctly either at least, I'm sure it has many problems. I hope my posting of so much is not too much, and any help would be very much appreciated. Thanks!

Read the article

No matter what, I can't get this stupid progress bar to update from a thread!

- by Synthetix

I have a Windows app written in C (using gcc/MinGW) that works pretty well except for a few UI problems. One, I simply cannot get the progress bar to update from a thread. In fact, I probably can't get ANY UI stuff to update. Basically, I have a spawned thread that does some processing, and from that thread I attempt to update the progress bar in the main thread. I tried this by using PostMessage() to the main hwnd, but no luck even though I can do other things like open message boxes. However, it's unclear whether the message box is getting called within the thread or on the main thread. Here's some code: //in header/globally accessible HWND wnd; //main application window HWND progress_bar; //progress bar typedef struct { //to pass to thread DWORD mainThreadId; HWND mainHwnd; char *filename; } THREADSTUFF; //callback function LRESULT CALLBACK WndProc(HWND hwnd, UINT msg, WPARAM wParam, LPARAM lParam){ switch(msg){ case WM_CREATE:{ //create progress bar progress_bar = CreateWindowEx( 0, PROGRESS_CLASS, (LPCTSTR)NULL, WS_CHILD | WS_VISIBLE, 79,164,455,15, hwnd, (HMENU)20, NULL, NULL); break; } case WM_COMMAND:{ if(LOWORD(wParam)==2){ //do some processing in a thread //struct of stuff I need to pass to thread THREADSTUFF *threadStuff; threadStuff = (THREADSTUFF*)malloc(sizeof(*threadStuff)); threadStuff->mainThreadId = GetCurrentThreadId(); threadStuff->mainHwnd = hwnd; threadStuff->filename = (void*)&filename; hThread1 = CreateThread(NULL,0,convertFile (LPVOID)threadStuff,0,NULL); }else if(LOWORD(wParam)==5){ //update progress bar MessageBox(hwnd,"I got a message!", "Message", MB_OK | MB_ICONINFORMATION); PostMessage(progress_bar,PBM_STEPIT,0,CLR_DEFAULT); } break; } } } This all seems to work okay. The problem is in the thread: DWORD WINAPI convertFile(LPVOID params){ //get passed params, this works perfectly fine THREADSTUFF *tData = (THREADSTUFF*)params; MessageBox(tData->mainHwnd,tData->filename,"File name",MB_OK | MB_ICONINFORMATION); //yep PostThreadMessage(tData->mainThreadId,WM_COMMAND,5,0); //only shows message PostMessage(tData->mainHwnd,WM_COMMAND,5,0); //only shows message } When I say, "only shows message," that means the MessageBox() function in the callback works, but not the PostMessage() to update the position of the progress bar. What am I missing?

Read the article

Send invitation to any user of google chats (is it possible?)

- by Gizzo

Hi I try to realize simple code on perl which should just get/send messages from/to gtalk accounts. I use Net::XMPP::* modules. All works just fine for users, who are my friends (in my "buddy" list). But i can't send message to unknown user. I know, that for this case i must send an invitation first, but Net::XMPP::* don't provide this possibility. There is only one way to invite person - construct my own xml according to "XEP-0155 Stanza Session Negotiation" protocol. But this doesn't work correct. When i send xml to server, it returns error "service-unavailable". I send: <message to='[email protected]'> <sxde xmlns='http://jabber.org/protocol/sxde' xmlns:sxde='http://jabber.org/protocol/sxde#metadata' session='0AEF4278DC4B6577' id='b'> <negotiation> <invitation> <feature var='http://jabber.org/protocol/whiteboard' /> </invitation> </negotiation> </sxde> </message> before my message. ANSWER: <message from='' to='[email protected]/TALKCDDCCE63' type='error'> <sxde id='b' session='0AEF4278DC4B6577' xmlns='http://jabber.org/protocol/sxde' xmlns:sxde='http://jabber.org/protocol/sxde#metadata'> <negotiation> <invitation> <feature var='http://jabber.org/protocol/whiteboard'/> </invitation> </negotiation> </sxde> <nos:x value='disabled' xmlns:nos='google:nosave'/> <arc:record otr='false' xmlns:arc='http://jabber.org/protocol/archive'/> <error code='503' type='cancel'> <service-unavailable xmlns='urn:ietf:params:xml:ns:xmpp-stanzas'/> </error> </message> Maybe i lost smth or should send another info before (or after..) ? Or maybe there are another way to send message without any invitation? Thanks in advance

Read the article

What does this SAP error mean? recv104 NiIReadrecv nixxi.cp5087

- by Techboy

I have an SAP BI Portal system and an SAP BW system. In the Visual Administrator of the BI Portal, section 'JCo RFC Provider' I have created some RFC listeners. In the SAP BW system (in transaction SM59), I have created, tested and activated the relevant RFC connections. When I start a JCo RFC Provider in the BI Portal the BW system that it communicates with produces these errors (displayed from SAP transaction SM21): Operating system call recv failed (error no. 104 ) Module nam Line Error text Caller.... Reason/cal nixxi.cp 5087 recv104 NiIRead recv Documentation for system log message Q0 I : The specified operating system call was returned with an error. For communication calls (receive, send, etc) often the cause of errors are network problems. It could also be a configuration problem at operating system level. (file cannot be opened, no space in the file system etc.). Additional specifications for error number 104 Name for errno number E_UNKNOWN_NO The meaning of the value stored in 'errno' is platform-dependent. The value which occurred here is unknown to the SysLog system. Either there is an incorrect error number in the SysLog message, or the tables TSLE2 or TSLE3 are not completely maintained. Technical details File Offset RecFm System log type Grp N variable message data 6 410220 m Error (Function,Module,Row) Q0 I recv104 NiIReadrecv nixxi.cp5087 There is plenty of space left in the file system, the servers can ping each other and there is no firewall between the servers. The tables (TSLE2 or TSLE3) mentioned in the error message do not provide any additional information. Please can you tell me if this error message refers to something specific, or if it is generic: recv104 NiIReadrecv nixxi.cp5087

Read the article

hp ProLiant DL380 G6 server error code: 347 of array controller

- by alhaythum

I have got a bran new hp ProLiant DL380 G6 server with embedded smart array P410i controller, I got 164 GB SATA drives and wanted to change them with 300 GB SATA drives before installation. Now, we replace the drives and begin the configuration with the hp DVD and begin; when we reach the point that we want to save the configurations, an error message appears: "The operation has failed with an unknown error, please restart the application and attempt the operation again" When using Rescan System, this error message appears: "Status Alerts - Smart Array P410i in Embedded Slot Warning Status Message Code Description 347 The cache for Smart Array P410i Embedded Slot is not configured" We return back to the 164 GB SATA drives and the message just keeps appearing again. Any help please.

Read the article

How to deal with transport level security policy with OSB

- by Jian Liang

Recently, we received a use case for Oracle Service Bus (OSB) 11gPS4 to consume a Web Service which is secured by HTTP transport level security policy. The WSDL of the remote web service looks like following where the part marked in red shows the security policy: <?xml version='1.0' encoding='UTF-8'?> <definitions xmlns:wssutil="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" xmlns:wsp="http://schemas.xmlsoap.org/ws/2004/09/policy" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:tns="https://httpsbasicauth" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns="http://schemas.xmlsoap.org/wsdl/" targetNamespace="https://httpsbasicauth" name="HttpsBasicAuthService"> <wsp:UsingPolicy wssutil:Required="true"/> <wsp:Policy wssutil:Id="WSHttpBinding_IPartyServicePortType_policy"> <wsp:ExactlyOne> <wsp:All> <ns1:TransportBinding xmlns:ns1="http://schemas.xmlsoap.org/ws/2005/07/securitypolicy"> <wsp:Policy> <ns1:TransportToken> <wsp:Policy> <ns1:HttpsToken RequireClientCertificate="false"/> </wsp:Policy> </ns1:TransportToken> <ns1:AlgorithmSuite> <wsp:Policy> <ns1:Basic256/> </wsp:Policy> </ns1:AlgorithmSuite> <ns1:Layout> <wsp:Policy> <ns1:Strict/> </wsp:Policy> </ns1:Layout> </wsp:Policy> </ns1:TransportBinding> <ns2:UsingAddressing xmlns:ns2="http://www.w3.org/2006/05/addressing/wsdl"/> </wsp:All> </wsp:ExactlyOne> </wsp:Policy> <types> <xsd:schema> <xsd:import namespace="https://proxyhttpsbasicauth" schemaLocation="http://localhost:7001/WS/HttpsBasicAuthService?xsd=1"/> </xsd:schema> <xsd:schema> <xsd:import namespace="https://httpsbasicauth" schemaLocation="http://localhost:7001/WS/HttpsBasicAuthService?xsd=2"/> </xsd:schema> </types> <message name="echoString"> <part name="parameters" element="tns:echoString"/> </message> <message name="echoStringResponse"> <part name="parameters" element="tns:echoStringResponse"/> </message> <portType name="HttpsBasicAuth"> <operation name="echoString"> <input message="tns:echoString"/> <output message="tns:echoStringResponse"/> </operation> </portType> <binding name="HttpsBasicAuthSoapPortBinding" type="tns:HttpsBasicAuth"> <wsp:PolicyReference URI="#WSHttpBinding_IPartyServicePortType_policy"/> <soap:binding transport="http://schemas.xmlsoap.org/soap/http" style="document"/> <operation name="echoString"> <soap:operation soapAction=""/> <input> <soap:body use="literal"/> </input> <output> <soap:body use="literal"/> </output> </operation> </binding> <service name="HttpsBasicAuthService"> <port name="HttpsBasicAuthSoapPort" binding="tns:HttpsBasicAuthSoapPortBinding"> <soap:address location="https://localhost:7002/WS/HttpsBasicAuthService"/> </port> </service> </definitions> The security assertion in the WSDL (marked in red) indicates that this is the HTTP transport level security policy which requires one way SSL with default authentication (aka. basic authenticate with username/password). Normally, there are two ways to handle web service security policy with OSB 11g: Use WebLogic 9.x policy Use OWSM Since OSB doesn’t support WebLogic 9.x WSSP transport level assertion (except for WS transport), when we tried to create the business service based on the imported WSDL, OSB complained with the following message: [OSB Kernel:398133]The service is based on WSDL with Web Services Security Policies that are not natively supported by Oracle Service Bus. Please select OWSM Policies - From OWSM Policy Store option and attach equivalent OWSM security policy. For the Business Service, either you can add the necessary client policies manually by clicking Add button or you can let Oracle Service Bus automatically pick and add compatible client policies by clicking Add Compatible button. Unfortunately, when tried with OWSM, we couldn’t find http_token_policy from OWSM since OSB PS4 doesn’t support OWSM http_token_policy. It seems that we ran into an unsupported situation that no appropriate policy can be used from both WebLogic and OWSM. As this security policy requires one way SSL with basic authentication at the transport level, a possible workaround is to meet the remote service's requirement at transport level without using web service policy. We can simply use OSB to establish SSL connection and provide username/password for authentication at the transport level to the remote web service. In this case, the business service within OSB will be transparent to the web service policy. However, we still need to deal with OSB console’s complaint related to unsupported security policy because the failure of WSDL validation prohibits OSB console to move forward. With the help from OSB Product Management team, we finally came up with the following solutions: Solution 1: OSB PS5 The good news is that the http_token_policy is made available in OSB PS5. With OSB PS5, you can simply add OWSM oracle/wss_http_token_over_ssl_client_policy to the business service. The simplest solution is to upgrade to OSB PS5 where the OWSM solution is provided out of the box. But if you are not in a position where upgrading is an immediate option, you might want to consider other two workaround solutions described below. Solution 2: Modifying WSDL This solution addresses OSB console’s complaint by removing the security policy from the imported WSDL within OSB. Without the security policy, OSB console allows the business service to be created based on modified WSDL. Please bear in mind, modifying WSDL is done only for the OSB side via OSB console, no change is required on the remote Web Service. The main steps of this solution: Connect to OSB console import the remote WSDL into OSB remove security assertion (the red marked part) from the imported WSDL create a service account. In our sample, we simply take the user weblogic create the business service and check "Basic" for Authentication and select the created service account make sure that OSB consumes the web service via https. This solution requires modifying WSDL. It is suitable for any OSB version (10g or OSB 11g version) prior to PS5 without OWSM. However, modifying WSDL by hand is troublesome as it requires the user to remember that the original WSDL was edited. It forces you to make the same edit each time you want to re-import the service WSDL when changes occur at the service level. This also prevents you from using UDDI to import WSDL. Solution 3: Using original WSDL This solution keeps the WSDL intact and ignores the embedded policy by using OWSM. By design, OWSM doesn’t like WSDL with embedded security assertion. Since OWSM doesn’t provide the feature to explicitly ignore the embedded policy from a remote WSDL, in this solution, we use OWSM in a tricky way to ignore the embedded policy. Connect to OSB console import the remote WSDL into OSB create a service account create the business service in which check "Basic" for Authentication and select the created service account as the imported WSDL is intact, the OSB Kernel:398133 error is expected ignore this error message for the moment and navigate to the Policies Page of business service Select “From OWSM Policy Store” and click “Add” button, the list of policies will pop-up Here is the tricky part: select an arbitrary policy, and click “Cancel” Update and save By clicking “Cancel’ button, we didn’t add any OWSM policy to business service, but the embedded policy is ignored. Yes, this is tricky. According to Oracle OSB Product Manager, the future release of OWSM will add a button “None” which allows to ignore the embedded policy explicitly. This solution keeps the imported WSDL intact which is the big advantage over the solution 2. It is suitable for OSB 11g (version prior to PS5) domain with OWSM configured. This blog addressed the unsupported transport level web service security policy with OSB PS4. To summarize, if you are using OSB PS5 or in a position to upgrade to PS5, the recommendation is to use OWSM OOTB transport level security policy directly. With the release prior to 11g PS5, you can consider the solution 2 or 3 depending on if OWSM is configured.

Read the article

How to set up spf records to send mail from google hosted apps to gmail addresses

- by Chris Adams

Hi there, I'm trying to work out why email I send from one domain I own is rejected by another that I own, and while I think it may be related to how I've setup spf records, I'm not sure what steps I need to take to fix it. Here's the error message I receive: Technical details of permanent failure: Google tried to deliver your message, but it was rejected by the recipient domain. We recommend contacting the other email provider for further information about the cause of this error. The error that the other server returned was: 550 550-Verification failed for <[email protected]> 550-No Such User Here 550 Sender verify failed (state 14). Here's the response from [email protected] Delivered-To: [email protected] Received: by 10.86.92.9 with SMTP id p9cs85371fgb; Wed, 2 Sep 2009 22:33:32 -0700 (PDT) Received: by 10.90.205.4 with SMTP id c4mr2406190agg.29.1251956007562; Wed, 02 Sep 2009 22:33:27 -0700 (PDT) Return-Path: <[email protected]> Received: from verifier.port25.com (207-36-201-235.ptr.primarydns.com [207.36.201.235]) by mx.google.com with ESMTP id 26si831174aga.24.2009.09.02.22.33.25; Wed, 02 Sep 2009 22:33:26 -0700 (PDT) Received-SPF: pass (google.com: domain of [email protected] designates 207.36.201.235 as permitted sender) client-ip=207.36.201.235; Authentication-Results: mx.google.com; spf=pass (google.com: domain of [email protected] designates 207.36.201.235 as permitted sender) [email protected]; dkim=pass [email protected] DKIM-Signature: v=1; a=rsa-sha1; c=relaxed/relaxed; s=auth; d=port25.com; h=Date:From:To:Subject:Message-Id:In-Reply-To; [email protected]; bh=GRMrcnoucTl4upzqJYTG5sOZMLU=; b=uk6TjADEyZVRkceQGjH94ZzfVeRTsiZPzbXuhlqDt1m+kh1zmdUEoiTOzd89ryCHMbVcnG1JajBj 5vOMKYtA3g== DomainKey-Signature: a=rsa-sha1; c=nofws; q=dns; s=auth; d=port25.com; b=NqKCPK00Xt49lbeO009xy4ZRgMGpghvcgfhjNy7+qI89XKTzi6IUW0hYqCQyHkd2p5a1Zjez2ZMC l0u9CpZD3Q==; Received: from verifier.port25.com (127.0.0.1) by verifier.port25.com (PowerMTA(TM) v3.6a1) id hjt9pq0hse8u for <[email protected]>; Thu, 3 Sep 2009 01:26:52 -0400 (envelope-from <[email protected]>) Date: Thu, 3 Sep 2009 01:26:52 -0400 From: [email protected] To: [email protected] Subject: Authentication Report Message-Id: <[email protected]> Precedence: junk (auto_reply) In-Reply-To: <[email protected]> This message is an automatic response from Port25's authentication verifier service at verifier.port25.com. The service allows email senders to perform a simple check of various sender authentication mechanisms. It is provided free of charge, in the hope that it is useful to the email community. While it is not officially supported, we welcome any feedback you may have at <[email protected]>. Thank you for using the verifier, The Port25 Solutions, Inc. team ========================================================== Summary of Results ========================================================== SPF check: pass DomainKeys check: neutral DKIM check: neutral Sender-ID check: pass SpamAssassin check: ham ========================================================== Details: ========================================================== HELO hostname: fg-out-1718.google.com Source IP: 72.14.220.158 mail-from: [email protected] ---------------------------------------------------------- SPF check details: ---------------------------------------------------------- Result: pass ID(s) verified: [email protected] DNS record(s): stemcel.co.uk. 14400 IN TXT "v=spf1 include:aspmx.googlemail.com ~all" aspmx.googlemail.com. 7200 IN TXT "v=spf1 redirect=_spf.google.com" _spf.google.com. 300 IN TXT "v=spf1 ip4:216.239.32.0/19 ip4:64.233.160.0/19 ip4:66.249.80.0/20 ip4:72.14.192.0/18 ip4:209.85.128.0/17 ip4:66.102.0.0/20 ip4:74.125.0.0/16 ip4:64.18.0.0/20 ip4:207.126.144.0/20 ?all" ---------------------------------------------------------- DomainKeys check details: ---------------------------------------------------------- Result: neutral (message not signed) ID(s) verified: [email protected] DNS record(s): ---------------------------------------------------------- DKIM check details: ---------------------------------------------------------- Result: neutral (message not signed) ID(s) verified: NOTE: DKIM checking has been performed based on the latest DKIM specs (RFC 4871 or draft-ietf-dkim-base-10) and verification may fail for older versions. If you are using Port25's PowerMTA, you need to use version 3.2r11 or later to get a compatible version of DKIM. ---------------------------------------------------------- Sender-ID check details: ---------------------------------------------------------- Result: pass ID(s) verified: [email protected] DNS record(s): stemcel.co.uk. 14400 IN TXT "v=spf1 include:aspmx.googlemail.com ~all" aspmx.googlemail.com. 7200 IN TXT "v=spf1 redirect=_spf.google.com" _spf.google.com. 300 IN TXT "v=spf1 ip4:216.239.32.0/19 ip4:64.233.160.0/19 ip4:66.249.80.0/20 ip4:72.14.192.0/18 ip4:209.85.128.0/17 ip4:66.102.0.0/20 ip4:74.125.0.0/16 ip4:64.18.0.0/20 ip4:207.126.144.0/20 ?all" ---------------------------------------------------------- SpamAssassin check details: ---------------------------------------------------------- SpamAssassin v3.2.5 (2008-06-10) Result: ham (-2.6 points, 5.0 required) pts rule name description ---- ---------------------- -------------------------------------------------- -0.0 SPF_PASS SPF: sender matches SPF record -2.6 BAYES_00 BODY: Bayesian spam probability is 0 to 1% [score: 0.0000] 0.0 HTML_MESSAGE BODY: HTML included in message I've registered the spf records for my domain, as advised here Both domains pass validate according to Kitterman's spf record testing tools, so I'm somewhat confused about this. I also have the catchall address set up on the stemcel.co.uk domain here, but I don't have one setup for chrisadams.me.uk. Instead, we have the following forwarders setup [email protected] to [email protected] [email protected] to [email protected] [email protected] to [email protected] [email protected] to [email protected] Any ideas how to get this working? I'm not sure what I should be looking for here.

Read the article

Unable to delete a file using bash script

- by user3719091

I'm having problems removing a file in a bash script. I saw the other post with the same problem but none of those solutions solved my problem. The bash script is an OP5 surveillance check and it calls an Expect process that saves a temporary file to the local drive which the bash script reads from. Once it has read the file and checked its status I would like to remove the temporary file. I'm pretty new to scripting so my script may not be as optimal as it can be. Either way it does the job except removing the file once it's done. I will post the entire code below: #!/bin/bash #GET FLAGS while getopts H:c:w: option do case "${option}" in H) HOSTADDRESS=${OPTARG};; c) CRITICAL=${OPTARG};; w) WARNING=${OPTARG};; esac done ./expect.vpn.check.sh $HOSTADDRESS #VARIABLES VPNCount=$(grep -o '[0-9]\+' $HOSTADDRESS.op5.vpn.results) # Check if the temporary results file exists if [ -f $HOSTADDRESS.op5.vpn.results ] then # If the file exist, Print "File Found" message echo Temporary results file exist. Analyze results. else # If the file does NOT exist, print "File NOT Found" message and send message to OP5 echo Temporary results file does NOT exist. Unable to analyze. # Exit with status Critical (exit code 2) exit 2 fi if [[ "$VPNCount" > $CRITICAL ]] then # If the amount of tunnels exceeds the critical threshold, echo out a warning message and current threshold and send warning to OP5 echo "The amount of VPN tunnels exceeds the critical threshold - ($VPNCount)" # Exit with status Critical (exit code 2) exit 2 elif [[ "$VPNCount" > $WARNING ]] then # If the amount of tunnels exceeds the warning threshold, echo out a warning message and current threshold and send warning to OP5 echo "The amount of VPN tunnels exceeds the warning threshold - ($VPNCount)" # Exit with status Warning (exit code 1) exit 1 else # The amount of tunnels do not exceed the warning threshold. # Print an OK message echo OK - $VPNCount # Exit with status OK exit 0 fi #Clean up temporary files. rm -f $HOSTADDRESS.op5.vpn.results I have tried the following solutions: Create a separate variable called TempFile that specifies the file. And specify that in the rm command. I tried creating another if statement similar to the one I use to verify that file exist and then rm the filename. I tried adding the complete name of the file (no variables, just plain text of the file) I can: Remove the file using the full name in both a separate script and directly in the CLI. Is there something in my script that locks the file that prevents me from removing it? I'm not sure what to try next. Thanks in advance!

Search Results

Search found 22167 results on 887 pages for 'message listener'.

Page 112/887 | < Previous Page | 108 109 110 111 112 113 114 115 116 117 118 119 | Next Page >

- by Devin

- by Rick Strahl

- by Matthew Guay

- by Rantanplan

- by ChrisD

- by insta

- by tim

- by MilindaD

- by Yeti

- by manuel

- by Mike Pateras

- by Bushman

- by Bedwyr Humphreys

- by John

- by daveywc

- by Soham

- by user1104854

- by kitfuntastik

- by Synthetix

- by Gizzo

- by Techboy

- by alhaythum

- by Jian Liang

- by Chris Adams

- by user3719091

< Previous Page | 108 109 110 111 112 113 114 115 116 117 118 119 | Next Page >