Search Results

Search found 4834 results on 194 pages for 'sudo'.

Page 112/194 | < Previous Page | 108 109 110 111 112 113 114 115 116 117 118 119  | Next Page >

• How to stop fan running always on Asus P8P67LE motherboard with ATI Radeon HD6900

  - by Chris Good

  I'm using Ubuntu 12.04 LTS. I'm not sure if it is the CPU (i7) fan or the video card fan. I've tried using lm-sensors & fancontrol sudo sensors-detect Now follows a summary of the probes I have just done. Just press ENTER to continue: Driver `w83627ehf': * ISA bus, address 0x290 Chip `Nuvoton NCT6776F Super IO Sensors' (confidence: 9) Driver `coretemp': * Chip `Intel digital thermal sensor' (confidence: 9) To load everything that is needed, add this to /etc/modules: # Chip drivers coretemp w83627ehf Like many people, I'm also getting error: /usr/sbin/pwmconfig: There are no pwm-capable sensor modules installed Here is the output of sensors: # sensors radeon-pci-0100 Adapter: PCI adapter temp1: +71.0°C coretemp-isa-0000 Adapter: ISA adapter Physical id 0: +44.0°C (high = +80.0°C, crit = +98.0°C) Core 0: +44.0°C (high = +80.0°C, crit = +98.0°C) Core 1: +40.0°C (high = +80.0°C, crit = +98.0°C) Core 2: +43.0°C (high = +80.0°C, crit = +98.0°C) Core 3: +42.0°C (high = +80.0°C, crit = +98.0°C) I'm hoping some-one has already solved this for my configuration because this seems to be a problem for many people and there are many different suggestions.

  Read the article

• Getting Ethernet driver to crippled machine

  - by Richard

  The reply at How do I install drivers for the Atheros AR8161 Ethernet controller? probably helps me. I have a Toshiba S855, bought yesterday. lspci -vv | grep Atheros command from the terminal shows me I have the AR8161 Gigabit Ethernet controller (rev 10) However the answer sudo apt-get install ... requires an internet connection. How can I, using another machine, capture the necessary information on that other machine to copy across to the crippled machine, and then how do I build from there. Thanks in anticipation

  Read the article

• Permanently mounting Windows' NTFS partition, fully enabled

  - by Bart van Heukelom

  I'm transforming a Windows 7 PC into a dual boot system with Ubuntu 10.10. Following other questions on this site, I've mounted my Windows drive by adding this to fstab UUID=blabla /windows ntfs users,defaults,umask=000 0 0 It appears to work well, I can read and write, but it appears to be a bit crippled still. When I tried to update an SVN working copy with RabbitVCS, it complained that it couldn't write to a temporary file inside the working copy, even though the permissions are all on 0777 inside /windows (by default, I haven't done that manually). It even corrupted that working copy :( It works when I use the command line SVN client with sudo, but that's hardly user friendly.

  Read the article

• What is the correct way to install ATI Catalyst Video Drivers in 12.04 LTS?

  - by Stephen Myall

  I am planning on doing a fresh install of 12.04 LTS next weekend (I am currently on Beta) and want to know what is the correct way to install ATI Catalyst Video Drivers in 12.04 LTS? I have been reviewing all the Q&A on AU and the reason for asking this specific question is that I maybe be missing some dependencies from my planned coding. In a previous AU question relating to 11.10 (here) NOT 12.04 the accepted response stated that this was a dependency. sudo apt-get install ia32-libs I was also receiving conflicting advice on other websites which put doubts on what the correct approach was.

  Read the article

• Why would I want to install node.js in my Rails Application?

  - by Crazy JIm

  Okay guys, I'm super confused. I thought node.js was a sever side framwork, basically the js version of Ruby's Rails or PHP's Zend. However, I'm having some difficulty with turbolinks, and it seems to be the way to fix it is through installing node.js I mean, I don't understand this at all. How can two frameworks work together like this? Also, it's not a gem (that REALLY would have confused me), you have to install node.js it onto your local machine by running (in the case of Ubuntu) sudo apt-get install nodejs Firstly, how does this totally separate framwork have any bearing on rails? Secondly, surely this isn't fixing the problem forever? When you specify a gem in your gemfile, the server knows what external libraries to install. How does the server know to install nodejs?

  Read the article

• Why doesn't LightDM always doesn't start under XEN

  - by DaedalusFall

  When I use XEN on Ubuntu (12.10), I have a problem that lightdm sometimes doesn't start when I boot up, I have to log in on the TTY and use sudo service lightdm restart, sometimes several times. Some of the time I get a mouse cursor and a blinking underscore in the top left of the (otherwise black) screen, but after restarting lightdm a few times it eventually comes up properly. I've tried this with XEN from the repos (version 4.1), XEN 4.2 built from source, an NVIDIA card and a radeon card (not using fglrx, which I can't seem to make work under XEN), the results are more or less the same. I can't see anything obvious in my Xorg.log, but I'm not really sure what to look for. Anyone had similar problems or luck getting xen working? Thanks in advance.

  Read the article

• ThinkPad fan control via procfs

  - by asebian

  My ThinkPad W500 used to crash sometimes under heavy load because the automatic control is not speeding up the fan far enough. But I was able to disengage the fan and let it run at full speed in Ubuntu 10.10. But this does not work in my new nice and shiny Ubuntu 11.10. Have a glimpse at fan control device. % ls -l /proc/acpi/ibm/fan -rw-r--r-- 1 root root 0 2012-03-18 15:46 /proc/acpi/ibm/fan % cat /proc/acpi/ibm/fan status: enabled speed: 3056 level: auto Now become super user in a fresh and clean environment and send control sequence. % exec sudo env -i bash -l $ echo 'level disengaged' >/proc/acpi/ibm/fan bash: echo: write error: Invalid argument What did I miss? Thanks for suggests.

  Read the article

• Can't copy from hfs+ external

  - by Janine

  I've spent days and days trying to figure this out, but still can't. I think I've read every article on this and tried all there is to try, and I still can't copy any file from my mac-formatted hfs+ external drive. Sorry if there's still an article I've missed.. I have disabled journaling and tried all the hfsprogs commands I could find, but still whenever I click on a folder on the external and try to copy it to my home directory, I get this: "The folder xxx cannot be handled because you don't have permission to read its content." I then found an article about inoring this by copying files through the Terminal. When trying to run the sudo cp -r command in the Terminal with my external drive path, I always get 'no such file or directory'.. Does anyone have another suggestion for me? Thanks in advance!

  Read the article

• Netdisco for Ubuntu server

  - by BrNathan

  Has anyone had luck installing netdisco through apt-get? I couldn't get it to work. I tried netdisco-frontend, netdisco-backend, netdisco-common, netdisco-installer. I used the command: sudo apt-get install netdisco-common netdisco-frontend netdisco-backend Everything installed fine, but I can't get it running. It doesn't seem to have install to /usr/local/netdisco/. I have looked all over the internet and there doesn't seem to be an easy way to do this. I use server 12.04. Thanks!

  Read the article

• Graphics system failure

  - by anonymous coward

  I just upgraded two versions of Ubuntu to Oneiric after a recent set of updates broke Audacious 2.4.something in Maverick for me. When it was all finished my Asus Eee 1215N with the 1366x768 screen and the notoriously unsupported Nvidia Ion2 Optimus chipset was working on minimum compatibility fallbacks at 1024x768 resolution. So I did a little bit of reading (not enough) and tried deleting a couple parts of the graphics system to see if I could force a retry on the autodetection. The result: No graphical shell works now. Attempted so far: -reinstalling xorg/nouveau, didn't work. -installing bumblebee/nvidia-current, didn't work. -sudo dpkg-reconfigure -phigh -a, didn't work. I'd like to stress that this is otherwise a perfectly functional installation that I had spent some time setting up already (including a successful compile of Audacious 3.21 that was working with all the plugins). Is there a way for me to rebuild the graphics system from scratch or should I just give up, cry a little, backup data, wipe partition and reinstall with a USB drive?

  Read the article

• Ubuntu 12.04 - Unable to change brightness

  - by Raymond Standen

  So, as a number of users seem to be experiencing, I am unable to change brightness on my laptop. Using the Brightness and Lock in settings, the slider moves but brightness does not adjust. The fn keys work for volume but not for brightness. I have updated my drivers and installed all updates, however the brightness is still at maximum. I have heard that opening sudo gedit /etc/x11/xorg.conf and entering Option "RegistryDwords" "EnableBrightnessControl=1" can fix this, however when opening xorg.conf through Terminal I am greeted with a blank document... Not very reassuring. Toshiba L750 Laptop Nvidia Graphics Card Dual boot with Windows

  Read the article

• Steps to diagnose SNU5600 disconnection problem

  - by Rich

  I have a Philips SNU5600 WiFi dongle plugged into two machines (ie I have two SNU5600 dongles, one in each machine). One machine is running 10.10 and the other is running Linux Mint. The dongles work absolutely fine, except if I do a lot of file transfers to a NAS attached to the wireless router. After a while the connection to the router will go. To get the connection back I either need to run sudo /etc/init.d/networking restart or I need to unplug and plug in again the dongle. Otherwise the dongle works fine (web browsing, streaming, etc). Output of lsusb: Bus 002 Device 003: ID 0471:1236 Philips (or NXP) SNU5600 802.11bg Output of lsusb -v at http://pastebin.com/dXYKkF01 What steps should I take next to resolve this? Is it a known problem? Could it be the router? It is a 3Com "OfficeConnect Wireless 11g Cable/DSL Gateway Version 1.02.15".

  Read the article

• Ubuntu only recognizes one partition from multi partitions SD card

  - by Jay Ngo

  Hello everybody, I split my sd card into 2 partitions. When i use usb-card-reader to read my sd card, only the one partition shows up on the screen, the other doesn't. I have run the command "sudo fdisk -l" and the result is the same, only one partition is recognized. But i do believe both partitions of my sd card work fine, because i still can boot my single-board computer with that sd card and run some programms, which are inside that unreadable partition. How can i access both partitions of my sd card? Does anyone know how to solve this kind of problem? I really appreciate your help.

  Read the article

• Ubuntu 12.04 "Shutdown" or "Restart" logs out

  - by jenls

  While logged in as a sudo user, click the right top power icon, then select and click "Shutdown" menu, it comes up with a dialog asking if I want to close all programs. The dialog has two options: restart or shutdown. Choose either one logs me out. Syslog has the following line about restart: WARNING: Unable to restart system: Authorization is required This happened after I installed NTP and some OpenStack packages while working in a prototype project. My Ubuntu's software is up to date as of this writing. Anyone encountered the same problem in 12.04?

  Read the article

• Change login screen to gnome-shell login

  - by Dr_Bunsen

  I was just goofing around in a vm to test what would happen if I purgen unity: sudo apt-get remove --purge unity* I found that I get an startup error, but when I proceed, I got this awesome login screen: It has an sexy effect and is just the gnome style my whole pc has got. So can any one please tell me how I change the default login screen program without having to bother clicking "fix this error" on every boot? Thanks in advance. [edit] This is the error I get, and the only option that works is the, run in low settings for one session.

  Read the article

• How to customise window decoration whilst using Compiz on Xubuntu?

  - by Benjamin

  I have installed Compiz on Xubuntu 11.10 with sudo apt-get install compiz compizconfig-settings-manager compiz --replace ccp & In the process the XFCE window decoration theme is overridden by that of Compiz (Gtk) which uses the Adwaita theme instead of the Greybird theme. Since Gtk is doing window decoration, I cannot change it back using the XFCE settings. I just need compiz for scale and window switch and I would like to return window decoration to XFCE (Xfwm4) or to be able to change the Gtk window decoration theme. How can I do that? I have found part of the (workaround) answer already: download Greybird Gtk theme install theme (here is where I failed I think) use dconf-editor to change the Gtk theme in org.gnome.desktop.interface The problem really at stage 2 is where do I place the theme? I tried in ~/.themes/ and then changed the value of gtk-theme in the editor to Greybird. But I saw no change.

  Read the article

• "merging" multiple hardrives for Ubuntu 14.04 install

  - by Thijser

  I have 3 hardrives inside my laptop 2 of which currently house other opperating systems but have a empty partitions of 8 and 9 gigabye and the third is just 12 gB (currently not partitioned at all). Now each of these 3 is to small to be useful to me, however combined they are 29gigs which can easily hold a ubuntu installation, and associated programs. Is there a way set up my installation in such a way that it threads these 3 disks as one? Or is there a way by which I can make it default storage of many things into one drive (downloads and sudo apt-get install for example) to one drive while keeping ubuntu onto another?

  Read the article

• Changing file permissions on USB external hard drive

  - by pacomet

  I am using an external USB hard drive for a long time in Ubuntu 10.04, both at work and at home. Now I've installed 12.04 at home. Today I used the USB drive for the first time. I can read the disk but can't change the permissions of a file I wanted. Output of "mount" /dev/sdb1 on /media/FREECOM HDD type vfat (rw,nosuid,nodev,uid=1000,gid=1000,shortname=mixed,dmask=0077, utf8=1,showexec,flush,uhelper=udisks) What I try sudo chmod u+w bsst-hdf_to_bsst-h5 and what I get -rw-r--r-- 1 paco paco 2956 dic 19 10:27 bsst-hdf_to_bsst-h5 Any idea would be appreciated. Thanks in advance

  Read the article

• Where do I get extra Compiz plugins?

  - by jasoncruz98

  I installed Compiz on my laptop running Ubuntu 11.10 last week. The way I installed it was kind of different, I opened up a terminal and typed this command: sudo apt-cache search compiz After that, I installed all the packages that appeared in the terminal window. I enjoyed all the effects of Compiz like Paint fire on screen, Desktop Cube, but I can't help but noticing people having some extra plugins which I don't have, such as Atlantis, Snow, Tile and much more. Where are they getting all those plugins and how do I get them?

  Read the article

• How to protect Ubuntu from fork bomb

  - by dblang

  I heard someone talking about a fork bomb, I did some research and found some dreadful information about some strange looking characters people can have you type at the command line and as a result do bad things on the computer. I certainly would not issue commands I do not understand but one never knows what can happen. I heard that some OS allows the administrator to place some limit on user processes to mitigate the effects of fork bombs, is this protection in Ubuntu by default or would a person with sudo privilege have to set this? If so, how?

  Read the article

• Cannot install vim

  - by Max Popp

  I am running ubuntu 11.10, as xubuntu, in an amd64 pc, configured as dual boot with win7 . I tried installing vim with this: sudo apt-get install vim I got these error message: "The following packages have unmet dependencies: vim : Depends: vim-common (= 2:7.3.154+hg~74503f6ee649-2ubuntu2) but 2:7.3.154+hg~74503f6ee649-2ubuntu3 is to be installed E: Unable to correct problems, you have held broken packages." I only have a very faint idea of what the problem is, and none whatsoever on how to correct this. Hope you guys can help. Thanks

  Read the article

• How can I mount a Synology DS212?

  - by Vigo

  I Have installed Ubuntu 11.10 and want to mount a synology ds212. I can see the diskstation in de filebrowser (before mounting with nfs) but can not open it. I've tried to mount it with nfs but no succes. Everything should be right at the Synology (nfs is on and maps are selected), and I've added a line in fstab. If I type sudo mount -a I dont't get an error. If I go to the mounted map I can't see anything in it..... What is going wrong? maybe router? Hope someone can help..!

  Read the article

• Symbolic Link: No such file or directory

  - by Sehe

  i created a symbolic Link from a File at "/opt/bladir/bla" to "bla". So "bla" is now in "/usr/bin/bla". But if i want to call "bla" at terminal, there comes the No such file or directory error. I looked up at "/usr/bin/bla" and the file is linking correctly at "/opt/bladir/bla". What can be the error? P.S. here is my terminal "entry": sudo ln -s /opt/bladir/bla bla Thanks! €: Problem solved. According to the Feature List, 12.04 should have Multiarch support... 'should'. I got the ia32-libs from synaptic and now the program wents just fine. As it looks, my symbolic links where correct. Thank you for all the answers!

  Read the article

• ralink rt2860 not working anymore in ubuntu 12.10

  - by greenit

  I just upgraded from Ubuntu 12.04 to 12.10, however, my network card is not working anymore... When i had 12.04 installed, i just had to download the driver from Ralink, go to the directory and enter these commands: $ make $ sudo make install and the network card worked... now, when I want to do this in ubuntu 12.10, it seems like it works, but it doesn't. I can enable the module, it recognizes the network card, but i am unable to connect to any wireless network... How can i get my wireless card working again? If any1 knows a solution, please tell it to me, thx in advance

  Read the article

• Error when trying to get movies off my Camera

  - by matt wilkie

  How do I retrieve movies and audio files from my Canon PowerShot S5 IS camera? Shotwell only sees the pictures. Mounting the camera via "Places Canon Digital Camera" and then clicking twice on the resulting desktop icon yields this error: could not display "gphoto2://[usb:001,002]/" There is nothing in /media. update: output of sudo fdisk -l Disk /dev/sda: 40.0 GB, 40007761920 bytes 255 heads, 63 sectors/track, 4864 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x3ee33ee2 Device Boot Start End Blocks Id System /dev/sda1 2364 2612 1999872 82 Linux swap / Solaris /dev/sda2 * 1 2364 18979840 83 Linux /dev/sda3 2613 4864 18089159+ f W95 Ext'd (LBA) /dev/sda5 2613 4864 18089158+ b W95 FAT32 Partition table entries are not in disk order Solution: install gphotofs, then Nautilus shows camera contents similar to a standard usb storage device (though note that gphotofs does not yet support adding to or deleting contents).

  Read the article

< Previous Page | 108 109 110 111 112 113 114 115 116 117 118 119  | Next Page >