Search Results

Search found 8851 results on 355 pages for 'xp cmdshell'.

Page 112/355 | < Previous Page | 108 109 110 111 112 113 114 115 116 117 118 119  | Next Page >

• Driver denied access to PCI card

  - by Corin

  Alright, I asked this on StackOverflow (here) and they suggested trying ServerFault to get help on permissions. So here's the deal. We designed a custom PCI card and wrote the driver for it. It's been working for years without problems but now we encountered one particular installation were it doesn't work. The problem is that we cannot connect to the PCI to begin communication with it. We tried replacing the card and had the same problem. We had the motherboard replaced thinking the PCI slots were bad. That didn't help either. We tried the cards in a different computer and they all worked. So it seemed to be something specific to the computer. The Windows Device Manager indicates the device is working properly and seems to have all the correct driver info. We now have this troublesome computer back at the office for testing. With the help of some extra debug info in the driver we determined that we cannot connect because access is denied. Sounds like a permissions issue to me. I should note that we are logged into the system as a local administrator. So what configuration option in Windows can prevent access to a device?

  Read the article

• Windows XP refuses to install on a dell mini 10

  - by Zac

  I have a dell inspiron mini 10. It boots from an external CD-ROM drive and goes through the first part of the windows XP home install with no problem, but on reboot it loses the CD-Rom drive when it goes into sysprep. Any ideas on how to get around this to complete the install?

  Read the article

• Winlogon Application Error [closed]

  - by IT_07

  This error is happening to 6 out of 32 computers. I have created a base image from scratch using Ghost Enterprise, but error still shows on the same machines. It happens at the log on prompt and after doing a soft reset the message goes away, but it comes back eventually. -Error message- The Instruction at "0X74eF400e" referenced Memory at "0X00000000" The memory could not be "Written". Winlogon.exe - Application Error Any reason why this is happening? I have tried to run a memTest but everything shows okay.

  Read the article

• Copy contents of a folder, but none of its subfolders?

  - by wizlog

  I'm using the explorer bar (the bar to the left of the main folder/files section in an explorer window) to show folders. I don't have access to open any of the folders, themselves (at least none on C:\ (the C drive). For some reason, I do however have copy rights (I can copy the folders). Because I can only see the folders, is there a way for me to copy the main folder, but not any of the subfolders? A localized example could be how to copy all files in C:\documents...[user]\my documetns\ but none of the folders (ex. C:\documents...[user]\my documetns\my pictures...) Is there a way for me only to copy a folder, but not its subfolders?

  Read the article

• TV video constantly skips 1/2 second, plays 1 second; green on bottom

  - by Robert

  I just got DirecTV. It worked for a day, but now the TV video constantly skips 1/2 second, then plays 1 second. Also, the bottom 5th of the screen is solid green. The audio does not skip. I tried to do "Set up TV signal" (in Media Center) - but I get an error. See the post I just made here titled "Error - “IR Hardware not detected” - but it’s installed/working." Thanks for your help.

  Read the article

• How to migrate WinXP from failing old HD to new one

  - by Péter Török

  Following this issue, we have all our important data backed up now. I also bought and installed a new replacement hard disk (WD 160GB PATA) as secondary (slave) drive. I created two primary NTFS partitions on it: a 40 GB system partition, and a 110GB data partition. In theory I could start reinstalling WinXP from scratch on the new system partition, then copying over all user data from the old drive to the new data partition. Once this is done, I could even throw away the old drive, or keep it just to see what happens. (Note: I don't want to clone the whole drive as it contains a dual boot setup with an old Linux installation which I don't need anymore, and anyway, a fresh reinstall would do WinXP good to get rid of many years' clutter.) However, I am lazy :-) The old HD is still functioning, the problem has not manifested again since. So I feel there is no need to hurry with a complete OS reinstall. What I don't know though is whether I will be able to install WinXP on the new system partition at a later stage without affecting the contents of the data partition on the same drive. If this is possible, I can just move over all our data to the new data partition to have it safe, then continue running WinXP from the old drive as long as it works. Does anyone see any problems/risks with this plan?

  Read the article

• Any way to ensure that a USB key always has the same drive letter?

  - by Xavier Nodet

  Depending on what's currently connected onto a PC, a USB key does not always get the same drive letter. This is an issue for me because I want to use this key as a backup destination, and I thus have to change the path that's used from time to time. Is it possible to make sure that a specific key ends up with always the same letter? Thanks.

  Read the article

• Enter network credentials as part of batch script

  - by Michael

  WinXP: I have several system services that are needed to run some machinery in my lab. The machine these services are running uses a lab login that has administrator rights. Our IS department, unfortunately, has it set up where at some point during the night the login "loses" the privilege level to start/stop these services. The account stays logged in, but the software controlling my hardware becomes unresponsive. In order to get things back up and running, I have to stop the system services and restart them. Because of the security settings, however, I have to re-enter the user password to start the service (even though the user was never logged out). That, I get the "This service cannot be started due to a logon failure" and I have to enter the password. What would be ideal is to have a batch script run before anyone gets into work that stops all of the necessary services, enters the user credentials when prompted, and then restarts them so that everything is ready for first shift to run. I assumed that using the Task Scheduler in Windows would work as it allows you to run batch files with a user's name and password, but this didn't seem to do the trick. With this setup I would arrive to find that all the services are stopped but not started again. (Presumably because the authentication failed.) The batch file is about as simple as it gets, all I have is: net stop "Service1" net stop "Serivce2" etc., then restart in reverse order based on dependency: net start "Service2" net start "Serivce1" What would it take to accomplish what I'm trying to do and restart the services?

  Read the article

• HTTP, HTTPS and FTP is not working but SMTP and IMAP are working.

  - by nWorx

  Yesterday on a computer of a friend a strange thing happened. after booting the ports fo http, https and ftp are closed but e-mail is still working. in the control panel the windows firewall seems active even if he tries to deactivate it. I have a suspision that it is the faul of norton internet security 2010, we have tried to uninstall it, but the uninstallation did not work. when using the removal tool from symantec it just goes to 23% and then it crashes. the process ccSvcHst.exe is still running. How can I safely remove the rest of Norton Internet Security? Edit: Norton Internet Security 2010 is sucesfully removed, but still no connectivity...

  Read the article

• Delete a file with pipe (|) in its name?

  - by Dave Jarvis

  Without booting to Linux, how do you delete a directory that was created in Linux on an NTFS partition that contains a pipe in the file name? For example: f:\flac\foreign\Yoshida_Brothers\Best_of_Yoshida_Brothers_|_Tsugaru_Shamisen Tried and failed: Midnight Commander Recursively deleting the parent folder del /f /s /q Yoshida_Brothers del /f /s /q "\\?f:\flac\foreign\Yoshida_Brothers\ rmdir /s Yoshida_Brothers FileASSASSIN Other ideas?

  Read the article

• Will I have internet connection issues next day, if I unplug router at night?

  - by headskracher77

  I did this regularly a few years ago and used to feel like I was 'being punished' by the Interent svc provider for disabling access to my computer, because trying to re-connect the next day became a constant pain. I have the same linksys router, a comcast modem, and hi-speed broadband through their LAN. Question: who or what is at fault for lousy internet connections, slow connections, or no connections: (everybody's tech dept. blames everybody else) The router? 10 year olds, maybe obsolete? The modem? came with the service plan - can connect three devices on a sharedconnection. The ISP: I read they not only even control and completely regulate bandwidth usage, but they also ration it!! (true?) So can I safely 'pull the plug' each night for security or not? thnx

  Read the article

• Sound does not play when locking WinXP

  - by Christopher

  If I press the Windows-L combination to lock my PC the "Windows Logoff" sound does not play. It used to but at some point it stopped. I installed only trustworthy apps on my system and it is pretty clean so I don't think it is a virus. I checked the sounds in the control panel and "Windows Logoff" is set. Is there a sound associated with the key combination? Perhaps something in the registry? Any help is appreciated.

  Read the article

• How do I disable Windows notifications from the registry?

  - by Arman

  Kindly give me the full path of regedit from where I can disable the windows notification. For example if I disable the ctrl+alt+del from regedit, after disabling windows sends me the notification that Task manager have been disable by your administrator. I don't need these type of notification. Kindly guide me.

  Read the article

• Getting error in internet shortcut

  - by MJM

  I create a file by url extension and type following text into in(its url is sample): [Internet Shortcut] URL=http://en.wikipedia.org/wiki/WebDAV In some case i gettin this error:"The Target "" of this Internet Shortcut is not valid. Go to the internet shortcut property sheet and make sure the target is correct." (for sample if in path or name of target file exist space character) my default browser in Firefox. I want have a internet shortcut that open in all browser and on al os. What can I fixed it problem? (Sorry if I am using the wrong terminology or grammar, I am self taught english language)

  Read the article

• Enhanced Explorer for Windows XP? [closed]

  - by iceman

  Possible Duplicate: Replacement for Windows Explorer? Is there a better explorer for Windows XP with Konqueror-like features (like dual panes), etc. Specially an enhanced integrated search option like in Vista? There are different products which cumulatively present something similar like xplorer2, Google Desktop Search or Windows Grep. But what about one integrated product?

  Read the article

• Peer to Peer solution for LAN over Internet

  - by Coyote

  I need to emulate a LAN between some machines over the internet to play some LAN only games. I remember that there was software that could do this, but don't remember what it was called. Anyone heard of this, or know of similar solutions that won't require a lot of work? The game is fun, but not fun enough to bother with setting up a VPN server. ;-)

  Read the article

• What is a good program, with PostScript output (for LaTeX), to make circuit diagrams?

  - by Breakthrough

  Hello; I just found out to my dismay that Visio 2007 does not include the ability to output drawings in EPS/PS formats, which makes it unsuitable for my uses. I wish to create various circuit digrams (including some texts for resistor values, voltage sources, etc...) with most electronic components (resistors, logic gates). Visio was a great tool for this, but I need to include these in lab reports which I am typesetting with LaTeX. The recommended format to include images in LaTeX is PostScript, so the fonts can be properly substituted, and the drawings scale properly. So my question: Is there a Windows program which will allow me to create circuit diagrams, add various labels, and export it to PostScript format?

  Read the article

• Is there any tool for IE 7 like firefox's "Remove it Permanently"

  - by metal gear solid

  Is there any tool for IE 7 like firefox's "Remove it Permanently" http://rip.mozdev.org/

  Read the article

• Random server lag, no CPU/mem/pagefile usage

  - by Kev

  We have a fairly new server running Windows 2003 SP2, and the past few days we've noticed random slowdowns. When I'm logged into the server over remote desktop while this is happening, or if I'm physically sitting at the server logged in, suddenly everything becomes extremely laggy. Any UI element I try to interact with takes upwards of ten seconds to react, and then responds very slowly. Then a minute later everything is quite snappy again. During this, I have Task Manager minimized to the tray, and there's no CPU usage. I open it up right after this happens, and there's very little CPU usage on the graph, and no memory or pagefile usage above normal. (Normal being 1.5 GB free in the case of memory.) This is what I see logged into the server, and then users start calling saying things are slow, timing out, and failing--anything to do with our server. No events in the Event Viewer around the times this happens. The context I'm working in (last thing I clicked, etc.) seems different every time--different programs active, different combinations of programs open. Never anything particularly stressful (like adding an event entry to a Cobian Backup configuration, or editing text in TextPad, which has been exceptionally stable in my extensive usage of it.) I would've thought it was just the server, but a family member's home PC (entirely separate) running WinXPSP3 had the same thing happen to it last night a few times. Is this some new behaviour introduced by the latest Windows Updates? Either way, where do I even start to look when nothing seems to be chewing up resources?

  Read the article

• Windows Media Player 11 doesn't download codecs for avi files

  - by ChrisF

  I've got some avi files that WMP will play the audio for but not the video. Why doesn't WMP download the codecs it needs? Or is the solution to download a codec pack and install that manually? In "Options Player" the "Download codecs automatically" option is checked. I've installed VLC so I can watch them, which I'm quite happy about so I don't need a recommendation for a new player.

  Read the article

• software question

  - by aravinthanb

  msxml3.0.dll access is denied while creating a xml file using html

  Read the article

• MS-DOS application sending screen output to LPT printer

  - by gadget00

  We have a MS-DOS application(coded in FoxPro), and recently had this glitch: the screen menu of the application without reason starts printing in an LPT Panasonic KX-1150 printer. It's a never ending print of all the screens of the application, as if the main output instead of sending it to the monitor, sends it to the printer! It creates a unnamed document with N/D pages and keeps printing forever. We have to turn the printer off and then kill the document in the spool to stop it... The printer is installed with a Generic/Text driver, and has happened to us both in WindowsXP and Win7. What can this be? Thanks in advance

  Read the article

• Formatting a 5.25" floppy disk

  - by Spütnik

  So after the massive trouble of finding a 5.25" floppy drive and a connecting it up, then changing the BIOS so it's set as my A: drive, I tried to format a couple of high-density 1.2MB floppy disks using the "format A:" command in Command Prompt. Both times it formatted only 160KB and left it at that. If I then check the amount of space on those disks, it then comes up as 160KB. Why is this the case? How can I get my the full value out of my 1.2MB? For reference, I have a Mitsubishi MF504C-318UG, which should support 1.2MB disks.

  Read the article

• Driver denied access to PCI card

  - by Corin

  Alright, I asked this on StackOverflow (here) and they suggested trying ServerFault to get help on permissions. So here's the deal. We designed a custom PCI card and wrote the driver for it. It's been working for years without problems but now we encountered one particular installation were it doesn't work. The problem is that we cannot connect to the PCI to begin communication with it. We tried replacing the card and had the same problem. We had the motherboard replaced thinking the PCI slots were bad. That didn't help either. We tried the cards in a different computer and they all worked. So it seemed to be something specific to the computer. The Windows Device Manager indicates the device is working properly and seems to have all the correct driver info. We now have this troublesome computer back at the office for testing. With the help of some extra debug info in the driver we determined that we cannot connect because access is denied. Sounds like a permissions issue to me. I should note that we are logged into the system as a local administrator. So what configuration option in Windows can prevent access to a device?

  Read the article

• Run batch file with custom drive mappings

  - by mwolfe02

  I want to create a "mini virtual environment" to run a program. The only difference between my normal environment and the virtual one would be the drive mappings. I have an X: drive mapped to \\some\network\location I have a program myapp.exe that expects the X: drive to be mapped to C:\local\path I need to keep my X: drive mapped to \\some\network\location throughout the process I would like to be able to run the following batch file and not have it affect the current environment: subst X: C:\local\path myapp.exe

  Read the article

< Previous Page | 108 109 110 111 112 113 114 115 116 117 118 119  | Next Page >