Search Results

Search found 14157 results on 567 pages for 'drive failure'.

Page 113/567 | < Previous Page | 109 110 111 112 113 114 115 116 117 118 119 120  | Next Page >

• Broken Motherboard Trace

  - by CoffeeBean

  When you're fairly certain that a motherboard trace is broken near the CPU (i.e.: you suspect heatsink / fan was improperly inserted) is it advisable to attempt a repair? I've heard that it can be done using a substance for repairing embedded windshield defoggers. Has anyone had any experience with this?

  Read the article

• I have been told to accept one error with Memtest86+

  - by DustByte

  Bought a new computer back in August with 4x4 GB RAM. Had problems with the RAM. They sent me four new sticks, which also generated errors. Singled out four sticks (from the eight I now had) that didn't generate any errors. Discovered by coincident a new RAM error last week (this time no BSOD). Contacted the company. According to them there have been issues with a bad stock from last summer so I got two tested 8 GB sticks sent to me. Been running Memtest86+ over the weekend. After 20 hours I got an error (see attached photo). The test has now been running for 37 hours but so far only this one error. I contacted the company where I bought the computer. They wrote back: I wouldn't worry about hat one fail. We have had similar situations here whereby it passes numerous times but then fails once. We think it's an issue with memtest, after all memory is faulty or it isn't so you can't really have it pass a few times, fail the next time around and then pass again! Please trust me on this and continue with the memory we sent you and if your problems continue we'll look at getting it replaced again. I gather from other forum posts that many people do not accept a single error. What could this single error signify, faulty RAM or a glitch in the MEMTEST program (or other)? Update: From the helpful comments below I conclude that an occasional (and rare) "random" error could occur and be acceptable, but repeated errors at the same address would indicate malfunction. Memtest has now run for 45 hours and I still have only one error. For everyone's information, I will keep running the test. In less than two days I am going away for a month. I will most likely leave Memtest running. As I do not have a UPS there is a risk that a power outage will ruin the experiment. The computer is a desktop so I cannot bring it with me (which would curiously have exposed it to more cosmic rays as I will be flying ;)).

  Read the article

• Frequent freezes with constant disk activity on SSD netbook

  - by SamsLembas

  I am running Arch Linux on an HP Mini 1000 with a SSD. The machine is a little under a year old and fairly heavily used. About a month ago the machine started freezing up. During the freezes, the system is almost completely unresponsive, seemingly especially for disk-intensive tasks such as launching an application for the first time since reboot. The disk activity led is always constantly illuminated during the freezes. After somewhere between 30 sec and 3 minutes, the machine returns to normal operation. I am pretty sure that the SSD is the source or the problem. Iotop reports a disk transfer rate of 0 during the freezes, so I think it must be getting "stuck" and simply not performing any r/w during the time. I can't seem to find any information on these symptoms on the Internet, so any input on exactly what might be the cause of this would be greatly appreciated. The machine is under warranty, but I would rather not deal with HP until I actually know what is going on. Thanks.

  Read the article

• IDE Motherboard to Boot from a SATA 1T Hdd

  - by JavaMan

  I want to use my SATA HDD in my very old ASUS A7V8X-X motherboard (made in 2003). I intended to buy a cheap adapter for this. Say something similar to this one: http://www.cooldrives.com/satoidecofor.html But would there be any issue if I want to boot from this SATA drive? My impression is that these kind of adapters convert SATA signal and commands to PATA directly and such a low level conversion should be transparent to the motherboard and BIOS - in case the BIOS doesn't support SATA. And, for my motherboard, it sure doesn't. Does anyone ever used such a kind of adapter to support a boot drive? Any success sorry?

  Read the article

• DVD drive not recognized

  - by David Oneill

  I'm in the midst of building a computer (first time builder) I got everything plugged in, and hit the power button. After the excitement of the first boot coming up on my screen, I was looking through the BIOS settings. However, joy soon turned sour, as I looked at the list of installed SATA devices. My DVD drive wasn't on the list :( So, what are common things I should check/try?

  Read the article

• Dell Vostro Desktop error.

  - by goldenmean

  Faced a strange situation at work today. We have people sitting at a table on opposite sides, with power cables underneath the table. This morning when the person sitting opposite to me banged his feet on ground, it disturbed the power cable to my PC and it turned-off. So when I turned it on, it says, "No boot device found" Press F1 to setup or F5 to perform test... There was no physical impact/crash/fall of the desktop cabinet, which could have crashed/damaged the hard disk physically. EDIT: The OS is Windows 7 So I tried to recognize it in the Bios setup, but even there it could not find the SATA disk that is connected to this machine. So then I opened the cabinet, removed the power supply and plugged it back again. Tried to reboot, same error, "Boot device not found" It is not recognizing the hard disk. Any ideas about what might be wrong? Hard-disk crash, OS Crash(But it doesn't even go to the point of loading the disk after the initial Bios execution, so doubt this...) Any pointers about how I should proceed to troubleshoot/solve this error are welcome.

  Read the article

• ext4: error loading journal

  - by cloudyOutside

  I have an external hard drive with two partitions: A small FAT32 which is mostly empty and works fine and a large ext4 with tons of data, most of which isn't backed up. The ext4 is visible, but can't be mounted. I get an "error loading journal" error. The drive is a Western Digital Caviar Blue 500GB. Roughly 30GB of that is FAT32 and the rest is the ext4. The light on the enclosure turns red when reading from the bad partition. It was made by Cavalry. There wasn't any warning, but coincidentally, I've been thinking lately that I should get two large capacity drives for real backups. Is there anything that can be done? I'm not even sure I have enough storage to backup everything even if it is redeemable.

  Read the article

• Laptop goes black after a minute or so

  - by ZEDA-NL

  I have a laptop that is behaving strangely. When I turn it on, it does everything what it is supposed to do, but after a minute or so I hear a Click and all goes black. It's like it turns off the power. It doesn't matter what the laptop is doing. It also happens when it's just waiting in the Bios setup menu. Has someone experienced this before? Can it be the power supply? Can it be a cooling problem? Any ideas? By the way, it's a Compaq Presario Laptop, maybe 3 years old already.

  Read the article

• Why has my computer started to make noises when I turn it on after I put it into sleep mode for the first time a week ago?

  - by Acid2

  I would usually have my pc on all day and fully shut it down at night time before I went to bed. I decided to put it into sleep mode instead the other day and everything was fine but when I woke it from sleep, I was presented with the blue screen of death and it started with some weird noise that sounded like some spinning part was off balance or possibly hitting something periodically. Sounds like it could be a fan or maybe the HDD. I'm not sure why sleep mode would mess up the hardware. Anyway, now sometimes, randomly, when I turn my computer on from a previous shut down, I still get to hear the noise but the start-up is normal. Sometimes I don't hear anything for the entire duration while I have it on and sometimes it goes away after a few minutes and sometimes it doesn't and I have to restart, like it isn't going away right now. I can hear the noise as I type this. Anyone got possible solutions? I don't want to open the system and mess up other stuff. I'm also not sure if I should take it somewhere to have it fixed - it might not make the noise then and work like normal and nothing would seem like needing to be fixed. Add: I'm running Windows 7, if that's of any relevance.

  Read the article

• My MacBook Pro (2011) is dead

  - by Dave

  I connected my Sony digital camera with the MacBook and the screen turned black. I wonder why because the Sony camera was not on at the time and technically could not be accessed. So I thought it might be temporary and I turned on my camera. Well, it did not work, but my MacBook Pro has been dead since then. It will not turn on - when I hold the power button for five seconds, nothing happens. When I connect the charger cable, the green light is very dim and blinks a little (with about 20% illumination). I wonder what the problem is. I have to call Apple Care, but just so that I know, what could be wrong? Is my MacBook permanently dead? It might be under warranty but I am not sure.

  Read the article

• Toshiba Equium A110-252 laptop won't boot Windows.

  - by Drew Gibson

  I have a Toshiba Equium A110-252 laptop (XP Pro) which stopped booting a couple of weeks ago. The symptoms are that the laptop would display its DOS Toshiba splash screen, then the Windows (XP) boot screen would display, then a very brief blue screen flash, then back to the boot options screen (offering safe mode, safe mode with networking etc, last known good config, etc... none of these work). I assumed a duff HD, and swapped it for a new one and reinstalled from a TrueImage backup. This worked until I installed windows updates I think (the backup was a few months old), and now the PC is doing the same thing. I have installed a third, old HD (60GB) with Ubuntu 11.04 on it, and everything is fine. PC boots and runs Ubuntu beautifully. I need Windows running on it though ! Given these symptoms, could it a windows update issue ? Or might I have a hardware fault still ?

  Read the article

• Weird RAM Upgrade Experience

  - by Axel Isouard

  I have a laptop, HP EliteBook 8540p having originally 4GB RAM and I've recently bought Corsair Value Select SO-DIMM 16 Go (2x 8 Go) DDR3 1333 MHz. It fits the required RAM specifications perfectly, and once I've inserted them, the BIOS recognizes the memory correctly, but my linux Gentoo running on kernel 3.1.6 SMP x86_64 crashes immediately when I'm running an app which consumes a lot of memory. The laptop crashes as if there's no more battery left, when the memory reaches at least 6000MB ram. Windows 7 doesn't want to run anymore, it shows a blue screen with the IRQ LESS OR EQUAL error if I set 8GB, and it doesn't boot at all if I set 16GB. Is there something I could do to fix this please ?

  Read the article

• virtual box cannot detect removable drive

  - by user23950

  How do I solve this problem? I've already reset virtual box, but it doesnt really detect the flash drive, when I click on devices and select usb devices, it says that there are no device that are available

  Read the article

• Auto backup a user folder to a usb when usb is plugged in

  - by Azztech Computers

  I'm a computer technician and help customers everyday with their computers and smartphones and have a really basic (i think) request but dont know how to go about it. Customer always come in with broken phones, water damage, needing updates, or just want me to backup their information. I currently have a program that i use when i backup their computers it backups their iOS folder C:\Users\USER\AppData\Roaming\Apple Computer\MobileSync\Backup but what i want is a quick easy way to do this in customers houses. What i require is a way when i plug in a USB drive it AUTOMATICALLY searches for the folder and starts transferring the folder to a predefined folder on the USB drive. This was I can just plug it in and begin work on their computer or phone without the risk of losing their information. I'm sure there is a .bat/.ini file i could use but wondering if someone has already done this or something similar as I would need it to search all the USER folders not just the one I'm logged into. Thanks in advance

  Read the article

• New MOBO + old Harddrive = NO BOOT

  - by rm

  My old mobo died, i bought a new one and swapped it. Plugged my old Harddrive and fired it up. I get a POST screen, the Windows logo ... and then the system restarts. Any ideas?

  Read the article

• Starting old computer - nothing shown on screen at boot

  - by Jonas

  I'm trying to start an about 10 years old PC computer. But nothing is shown on the screen, and it beeps everytime I press a key on the keyboard. I can press Ctrl+Alt+Del to reboot the computer. The monitor is newer and seem to work with other computers. I don't see anything from POST/BIOS at start or later. I have tried to change to another graphic card, but it didn't change anything. What can I do to solve this problem? Update: I have now tried with another computer (the one where the "another graphic card" came from) and I got the same problem. I doesn't show anything on the screen. Both these computers had a GeForce2 MX 400 graphic card. I tried with another computer screen it didn't work - it was showing "signal out of range". So is the graphic card GeForce2 MX 400 too old for newer TFT-monitors? I tried with a third computer so I know that the monitors are working, and both monitors work fine with that computer.

  Read the article

• Infected Win XP disk not openable on a Vista computer

  - by Retired57

  How can I read a WinXP partioned disk that is infected and shows up on a USB connection to Win Vista computer as a single partition that Vista cannot see the contents? The XP computer HDD is partioned into 4 partitions. It became infected, and all attempts to clean it have failed. Applications begin to launch, but are then shut down by the infecting agent. Using a major Anti-virus Co. boot disk (which was unable to connect to the Web, probably because the infecting agent stopped it) with virus definitions dated after the disk became infected, the resultant scan showed no infection. I bought a USB cable to connect the IDE drive to my Vista computer, but when I open Win Explorer, it sees the disk, but does not show any contents. It indicates it is a single partition that is valid. However in all the ways I have tried it does not show drive contents. Any suggestions on what to do next?

  Read the article

• CentOS 5 installation - GRUB installed on USB drive

  - by John

  Hi. I installed CentOS via unetbootin and USB stick. Unfortunately, I can not now start my system w/o my USB usb drive. Can someone provide me with some information how to fix this? Thanks.

  Read the article

• Add SATA Port to Motherboard?

  - by YAS

  I recently took off the bottom covers to my laptop, an Aspire 6930, and one of the covers was hiding an empty space large enough for a second hard drive. The bit of motherboard that was showing had the solder joints for a SATA port, but no port. What I'm wondering is; If I get a spare SATA port and solder it in would it mess up my motherboard and kill my laptop? I'm not concerned about a clean solder job, I can do that. But if the port is soldered in cleanly if there would be any danger to doing it. It'd be pretty darn awesome to get a second hard drive in my laptop.

  Read the article

• Upgrading HP DL185 G5 8LFF, is using a Dell J1520 4-Drop SATA Adapter possible?

  - by jpreed00

  The HP DL185 G5 8LFF model supports 8 3.5" drives and 1 optical drive. However, instead of the optical drive, I'd like to have 2x 2.5" drives instead. The problem is that the PSU has no more SATA power cables (even though the motherboard has 4 additional SATA data ports). The PSU does have a free 10-pin connector and it looks like the J1520 cable from Dell would fit the bill. Link to cable description Does anyone have any experience using these cables? Are they safe? Any other ideas for adding the disks to the server if I don't use the cable? Thanks!

  Read the article

• Laptop powering off after 10 mins or so

  - by Jack

  I have no OS installed, and I am trying to use a linux boot disc. However it is not a linux problem....if I just leave the computer on at the no operating system found message, it still turns off. I thought maybe it was overheating, but I am 90% sure that is not the problem. What else could cause this? I should have mentioned, it's a laptop.

  Read the article

• water cooler fan in my computer room............

  - by metal gear solid

  Is using water cooler fan in my computer room HARMFUL for the internal parts of the computer system?

  Read the article

• HP Pavillion dv6 laptop - 15 beeps on startup and a black screen?

  - by dunc

  Usual story - girlfriend's step-brother's laptop is broken. I don't know a huge amount about what occurred before it broke, but I do know the following: When you try to turn the laptop on, it beeps 15 times exactly. The screen remains black. The LED on the Caps Lock key flashes continuously. If left on, the laptop never boots - as far as I can see. If left on, on a stable surface with decent ventilation for a relatively short period of time, the laptop (below keyboard, but not where the RAM/HDD are) gets very hot. I've tried doing what most websites appear to recommend for similar problems, which is to disconnect AC and battery then hold the power button down for a minute before reconnecting the AC and trying to turn the laptop on - no difference. EDIT I've also tried re-seating the RAM, to no avail. Any ideas? Thanks in advance,

  Read the article

• How small can/should I make my partitions?

  - by Pureferret

  My machine is currently split into 3 user partitions (plus however many Windows and Linux have decided to slyly create) Which are C: Windows 7, D: Data, and E(?): Ubuntu. I'm considering wiping my Windows 7 Install (stupid Skyrim not installing) and restructuring the way my machine operates. I want the partitions for the Windows and Linux install to be as small as possible while still able to function well, and be able to install games on my Windows C: drive. I then want to link from both Win7 and Linux drives to the middle D drive so that the in built My Documents (and etc on windows) folder and my Home folder (linux) share a common location, rather than my current situation which is 3 separate file locations. Something like this: I have 1 TB to play with and I want to know the 'best' sizes to make these partitions when I reinstall Windows (which I need to do anyway) and re-jig everything.

  Read the article

• Allowing Apache in Ubuntu to access files in NTFS hard drive

  - by lyrae

  I have LAMP running in Ubuntu. However, my files are located on a separate NTFS hard drive (/media/shared/mysite/). going to http://localhost gives me a 403 how can i, securely, allow apache to read/write the NTFS disk? 'shared' is currently being mounted when system boots. here's the entry in fstab: /dev/sda1 /media/shared ntfs-3g quiet,defaults,locale=en_US.utf8,umask=000 0 0

  Read the article

< Previous Page | 109 110 111 112 113 114 115 116 117 118 119 120  | Next Page >