Search Results

Search found 4015 results on 161 pages for 'packet capture'.

Page 113/161 | < Previous Page | 109 110 111 112 113 114 115 116 117 118 119 120  | Next Page >

• Why am I seeing MailSlot Browse messages on unrouted ports of my Linux box?

  - by nmichaels

  I have a Linux box (Debian squeeze) with several NICs. The ones of interest are: eth3 - my main link to the network (dhcp on 10.20.30.0/24) eth0 - the first connection to my test network (static: 192.168.1.2) eth4 - the second connection to my test network (static: 192.168.1.1) My routing table looks like this: $ sudo route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 10.20.30.0 * 255.255.255.0 U 0 0 0 eth3 default 10.20.30.254 0.0.0.0 UG 0 0 0 eth3 I have the 2 test net ports connected to each other with a crossover cable and an instance of wireshark running on each port. Every once in a while, I'll see a packet like the following show up. Who could be doing this, and how do I convince them to stop? I do have Samba running on the machine (for a cifs mount) but don't see why it would be sending packets out to unrouted ports. I had a Windows VM running in VMWare Client and thought that might be causing it, but it still happens without it. What I want is totally silent interfaces so I can run some tests with Scapy over them.

  Read the article

• How to implement JQuery easing into this window scroll movement function?

  - by Mohammad

  With this code I've been able to capture the mousewheel movement and apply it to the horizontal scroll bars instead of the vertical default. $('html').bind('mousewheel', function(event, delta) { window.parent.scrollBy(-120 * delta, 0); return false; }); Is there any way that I could add this jQuery easing animation to the scroll movement? jQuery.extend( jQuery.easing, { easeInOutBack: function (x, t, b, c, d, s) { if (s == undefined) s = 1.70158; if ((t/=d/2) < 1) return c/2*(t*t*(((s*=(1.525))+1)*t - s)) + b; return c/2*((t-=2)*t*(((s*=(1.525))+1)*t + s) + 2) + b; } }); Thank you so much in advance!

  Read the article

• Problem with PXE boot

  - by user70523

  I followed the following link for PXE boot, http://www.howtoforge.com/setting-up-a-pxe-install-server-on-ubuntu-9.10-p3 and I was able to ping the client from the server and also when I booted up the client It is getting the IP address from the server. But later,I got this error PXELinux 3.82 2009-06-09 . . . [other informations] !PXE Entry point found (we hope) at 9D3B:0109 via plan A UNDI code segment at 9D3B len 16C2 UNDI data segment at 933B len A000 Getting cached packet 01 02 03 . . . [other informations] TFTP prefix: Trying to load: pxelinux.cfg/ec5db4c0-74fe-d511-b9e7-3d9235afe5a1 Trying to load: pxelinux.cfg/01-00-17-31-b6-5e-a8 Trying to load: pxelinux.cfg/0A64491E Trying to load: pxelinux.cfg/0A64491 Trying to load: pxelinux.cfg/0A6449 Trying to load: pxelinux.cfg/0A644 Trying to load: pxelinux.cfg/0A64 Trying to load: pxelinux.cfg/0A6 Trying to load: pxelinux.cfg/0A Trying to load: pxelinux.cfg/0 Trying to load: pxelinux.cfg/default Unable to locate configuration file Boot failed: press a key to retry or wait for reset I have put all the files mentioned in the link in tftpboot. Can anyone explain what could be the problem. Thanks in advance

  Read the article

• Camera Filters in ios7

  - by Muhannad Dasoqie

  How I can use the camera filters that already exist in iOS7? If i used this code: UIImagePickerController *picker= [[UIImagePickerController alloc]init]; picker.delegate = self; picker.allowsEditing = YES; picker.sourceType = UIImagePickerControllerSourceTypeCamera; [self presentModalViewController:picker animated:YES]; the camera will open, and I can capture a photo but without using the filters. my question is: can I use the exist filters in camera view in iOS7?

  Read the article

• Firefox is very slow when establish SSL sessions

  - by yanglei

  Using wireshark, I discovered that Firefox v3.0 gets stuck every time before "client key exchange, change cipher spec" stage when establishing a SSL session. Specifically, it takes 0.8~1.8 second before Firefox send "Client Key Exchange" request. This is unacceptable since our application is HTTPS only. I tested this on IE6 and IE8, both works well. Any clues? [Update] Finally, I found the reason of 1 ~ 2 seconds stuck by displaying all captured packets in Wireshark. After the "server hello" stage, Firefox makes a request to ocsp.verisign.com combined with an additional DNS lookup for that domain. Firefox must wait the revocation status from OCSP before entering the next stage of SSL. Depends on whether DNS cache is in effect, this process takes 1 ~ 2 seconds. A interesting observation is that the IP packet contains "client key exchange" has a high possibility to get lost and thus a TCP retransmission is necessary. When this happens, the process can take 3 seconds at worst. I'm not sure if this is a coincidence or a bug. Anyway, here is the result from Wireshark: (delta-time) 0.369296 src-ip dst-ip TCP [ACK] Seq=161 Ack=2741 Win=65340 Len=0 2.538835 src-ip dst-ip TLSv1 Client Key Exchange, Change Cipher Spec, Finished 2.987034 src-ip dst-ip TLSv1 [TCP Retransmission] Client Key Exchange, Change Cipher Spec, Finished The difference between Firefox and IE is this: Firefox 3 enables OCSP checking by default where as IE only supports it. So, there is no problem with both IE6 and IE8. This is indeed a "certificate revoke" problem. Thanks

  Read the article

• Issue with mouse move event

  - by Vinjamuri

  I have a WPF control1 (has a moving control) that is hosted through elementhost on a windows form. My aim is to capture the mouse move events for the elementhost. I found out from the following link that MouseMove fires when Control moves under mouse while mouse stands still. http://social.msdn.microsoft.com/Forums/en/wpf/thread/56e7b331-ac6f-4d62-a83b-c09009b79fa0 I am getting fake mouse move events for elementhost. In order to fix this issue, I added a button on top of elementhost and set its Visible property to Hidden. Still I get fake mouse move events.. How to fix this issue? Is there any workaround? Appreciate your help...

  Read the article

• MS SQL Server Firewall Ports

  - by mmacaulay

  Hi, I've recently found myself in the position of quickly deploying a production app on SQL Server 2008 (EXPRESS), and I've been having some issues with configuring firewall rules between our web server running the ASP.NET app and our database server. Everything that I can find on the internet claims that I should only need to have TCP ports 1433/1434 and UDP port 1434 accessible on the database server. However, we were unable to get connectivity going between the web app and the database with just those ports. With the help of one of the guys in our datacentre, we discovered that there was traffic also going to TCP port 2242 on the database server. After opening this port, everything worked, but we're not sure why. Later on, I had to reinstall SQL Server due to some disk space issues, and found that the problem had resurfaced - after another session with the packet sniffer, we discovered that this time traffic was going to TCP port 4541 on the database server. My question is, is there some configuration option that I'm missing in SQL server that's making it choose random ports? I'd like to have our firewall rules locked down as much as possible, and of course we'd like to avoid any future mysterious connectivity issues, especially once the app is live. Both servers are running Windows 2003 R2 X64.

  Read the article

• OpenBSD logins via SSH seem to be ignoring my configured radius server

  - by Steve Kemp

  I've installed and configured a radius server upon my localhost - it is delegating auth to a remote LDAP server. Initially things look good: I can test via the console: # export user=skemp # export pass=xxx # radtest $user $pass localhost 1812 $secret Sending Access-Request of id 185 to 127.0.0.1 port 1812 User-Name = "skemp" User-Password = "xxx" NAS-IP-Address = 192.168.1.168 NAS-Port = 1812 rad_recv: Access-Accept packet from host 127.0.0.1 port 1812, id=185, Similarly I can use the login tool to do the same thing: bash-4.0# /usr/libexec/auth/login_radius -d -s login $user radius Password: $pass authorize However remote logins via SSH are failing, and so are invokations of "login" started by root. Looking at /var/log/radiusd.log I see no actual log of success/failure which I do see when using either of the previous tools. Instead sshd is just logging: sshd[23938]: Failed publickey for skemp from 192.168.1.9 sshd[23938]: Failed keyboard-interactive for skemp from 192.168.1.9 port 36259 ssh2 sshd[23938]: Failed password for skemp from 192.168.1.9 port 36259 ssh2 In /etc/login.conf I have this: # Default allowed authentication styles auth-defaults:auth=radius: ... radius:\ :auth=radius:\ :radius-server=localhost:\ :radius-port=1812:\ :radius-timeout=1:\ :radius-retries=5:

  Read the article

• How do I read live camera data on the iPhone (like Microsoft Tag Reader)?

  - by Bill

  While the user is still in UIImagePickerController, I'd like to be able to get a UIImage representation of the image in the camera, make some changes to the image, and then display the altered image instead of the image coming directly from the camera. How can I do this? I tried setting a timer and calling takePicture, but calling it seemed to have no effect. The documentation says: Calling this method while an image is being captured has no effect. You must wait until the associated delegate object receives an imagePickerController:didFinishPickingMediaWithInfo: message before you can capture another picture. So how can I do this? I know that it's possible, since apps like Tag Reader are able to detect when something specific rolls in front of the camera. Thanks!

  Read the article

• Scite Lua - escaping right bracket in regex?

  - by ~sd-imi

  Hi all, Bumped into a somewhat weird problem... I want to turn the string: a\left(b_{d}\right) into a \left( b_{d} \right) in Scite using a Lua script. So, I made the following Lua script for Scite: function SpaceTexEquations() editor:BeginUndoAction() local sel = editor:GetSelText() local cln3 = string.gsub(sel, "\\left(", " \\left( ") local cln4 = string.gsub(cln3, "\\right)", " \\right) ") editor:ReplaceSel(cln4) editor:EndUndoAction() end The cln3 line works fine, however, cln4 crashes with: /home/user/sciteLuaFunctions.lua:49: invalid pattern capture >Lua: error occurred while processing command I think this is because bracket characters () are reserved characters in Lua; but then, how come the cln3 line works without escaping? By the way I also tried: -- using backslash \ as escape char: local cln4 = string.gsub(cln3, "\\right\)", " \\right) ") -- crashes all the same -- using percentage sign % as escape chare local cln4 = string.gsub(cln3, "\\right%)", " \\right) ") -- does not crash, but does not match either Could anyone tell me what would be the correct way to do this? Thanks, Cheers!

  Read the article

• Is there an easy way to get a list of all successful captures from a regex pre-5.10?

  - by Chas. Owens

  I know the right way to do this if I have Perl 5.10 is to use named captures and values %+, but in Perl 5.8.9 and how can I get a list of successful captures? I have come up with two methods that are both just terrible: #you need to list each possible match my @captures = grep { defined } ($1, $2, $3, $4, $5, $6, $7, $8, $9, $10, $11, $12, $13, $14, $15, $16); and #ew, I turned on symbolic references { no strict 'refs'; my @captures = map { defined $+[$_] ? $$_ : () } 1 .. $#+; } There is a third option I have found involving (?{}), but it requires global variables (because the closure happens at compile time) and takes the regex from reasonably clear to ungodly mess. The only alternative I have found is to capture the whole match and then use another set of regexes to get the values I want (actually I build the first regex out of the other regexes because there is no good reason to duplicate the logic).

  Read the article

• Using custom request and custom redirect with Contact Form 7

  - by Scott B

  I have several sites that I want to link back to the main site which hosts the contact form (using contact form 7). I would like to capture the request parameter "site-url" on incoming links to the contact form. Then when the user submits the form, I would like to redirect them back to the site specified in the site-url. Any ideas if this is possible with contact form 7? I would also like to add a special field in the contact form which would insert the site-url into the email that i get so that I know which site they were referred from.

  Read the article

• Remote Desktop *from* Windows 2008 R2 Server

  - by freefaller

  Summary: how do I create an RDC connection from a Windows 2008 server to another server? Our client will only allow us to connect to their server via a static IP address (which is fair enough), but unfortunately as we're a very small company we don't have one in the office. As a work around, we had the connection working through our old Windows 2003 server (dynamic-cloud from 1and1). .. however we have just rebuilt the server to run under Windows 2008 R2 (don't ask, but it was necessary), and now I simply cannot get the connection working. I have added an "Outbound Rule" to Windows Firewall with Advanced Security (TCP, All local ports, 3389 remote port - I have also tried the other way around). I have added a packet filter IP security rule with the same details. The 1and1 firewall rules (through their online control panel) allows for 3389 TCP and UDP. But it is simply not connecting (yes, the server is definitely on and able to accept connections) with the general error of... Remote Desktop can’t connect to the remote computer for one of these reasons: 1) Remote access to the server is not enabled 2) The remote computer is turned off 3) The remote computer is not available on the network Is there anything obvious I've missed - or something I can use to find out where the request is being blocked? The new server is using the exact same IP address as before, so I don't believe that would be an issue. Unless it's trying to use an IPv6 address rather than the old IPv4 address that it was before? I apologise that I am not a network person by trade, but I know more than anybody else in my office!!

  Read the article

• network latency, TCP and UDP packets

  - by user115848

  Hello recently my network has started to cause me lots of problems. I have a cable modem, connected to a tp-link router (with some port forwarding). Everything was working fine then i started to get lots of udp (port 53) "UNREPLIED" logs in the router. Now there are tcp UNREPLIED logs too. This is causing lots of latency and failed connections when trying to connect to different internet sites. Also, we run an openfire server for spark connections, and I believe its causing connectivity issues for some users who are trying to connect using Spark (some people connect fine, others don't). Please see screen shot below for packet logs. It has to be something internally, as I connected straight to the comcast modem and i was able to connect to the internet and various sites as normal. I tried to swap out the router with a different and got the same issue. I scanned both my internal dns servers for viruses or malware and it came up empty. Another anomaly is that when i try to connect to www.cnn.com, i get redirected to the different site. I scanned my own machine for hijacks. Not sure if this is related to the networking issue. Please let me know if you have any ideas for troubleshooting.

  Read the article

• Load testing a quicktime streaming server from ubuntu machine

  - by ebeland

  I have software that can launch and control multiple firefox browsers on Ubuntu EC2 images. I need to run a small load test against a QuickTime Streaming server. The stream starts automatically when loaded in a browser that has the QuickTime plugin, so I don't need to automate the stream once it starts. Alternately, I can also make these machines run arbitrary ruby code or executables. How can I get these ubuntu machines to pull in the stream? Also, how can I capture bandwidth usage (maybe a shell script?) on the worker machines?

  Read the article

• how does a computer know which IP address will route information to the internet? [closed]

  - by JohnMerlino

  Possible Duplicate: How does IPv4 Subnetting Work? For example, I have a computer with a Network Inteface Card (NIC) which is an Ethernet card that is connected by Ethernet cables to a router. There is also another computer with a cable that is connected in another port of the router. This is a Belkin router operating over an Ethernet in the LAN. When I connect to serverfault.com, it maps to an IP address. My computer now has a task of connecting to that IP address. But my computer itself cannot connect to the serverfault IP address. Only the router can. So the task of my computer is to find the IP address associated with the node that will do the routing to the public internet. How does my computer know that a particular IP address in the local network belongs to the router, and is not another computer connected to the network? Is this information configured manually in the operating system itself? Somehow my computer must know that it must send ethernet frames to the router with the expectation that the router will then send the packet to a public IP. How does it know to send it to the router? Is the router's ip address stored in my computer like a key/value pair e.g. "router"="192.168.2.6", so that when I put a public ip address, my computer first knows to connect to 192.168.2.6?

  Read the article

• How to route to a secondary interface on the same physical ethernet?

  - by sjose3612611

  INTERNET<->(wan)BRIDGED_DEVICE(lan)<->ETH_ROUTER<->LAN Problem: Need to access web server on BRIDGED_DEVICE's LAN from INTERNET via ROUTER (BRIDGED_DEVICE's web server cannot be accessed form INTERNET since it has no Public management IP). Cannot configure bridged device. It has a static IP on its LAN to which its web server binds. Attempt: Create a secondary/alias WAN Interface on ETH_ROUTER (e.g Primary: eth0.1 (for internet access) and Secondary: eth0.2 (for accessing web server on BRIDGED_DEVICE), (No VLANs). eth0.1 has a public IP; eth0.2 has a static private IP in the BRIDGED_DEVICE's subnet (e.g 10.0.X.Y). Iptables on ETH_ROUTER: Added a port forward (DNAT) from eth0.1 to eth0.2: iptables -t nat -I PREROUTING -i eth0.1 -p tcp --dport 80 -j DNAT --to-destination 10.0.X.Y iptables -t nat -I POSTROUTING -o eth0.2 -s 10.0.X.0/24 -j MASQUERADE Stateful firewall w/ overall drop policy on FORWARD chain, hence: iptables -I FORWARD -i eth0.1 -d 10.0.X.Y -p tcp --dport 80 -j ACCEPT Can ping from ETH_ROUTER to BRIDGED_DEVICE but unable to reach the web server from Internet. I see packet cont increasing for the DNAT rule but not sure where it disappears in the ETH_ROUTER after that. ETH_ROUTER is the only device that can be configured to achieve this. If familiar with this scenario, please suggest what I may be missing or doing wrong here or suggest techniques to debug?

  Read the article

• WinAPI C - RunAsUser from REDMON_USER and REDMON_SESSIONID

  - by scriptmaster

  I installed a PostScript printer driver and have setup REDMON (redmonnt.dll) for redirecting postscript output to my program. In my rather simple c program I capture the data from STDIN and I am able to successfully save it into a .ps file. The file looks OK. However, I want to start gsview.exe for viewing the file. If I call ShellExecute it fails in Windows 7 because of permission issues. It seems that my program is called under a different user account (LOCAL SERVICE). So I am looking for a way to run gsview.exe under a specific username (the user who initiated the print job is available to me in a variable as REDMON_USER along with the SESSIONID as well. I am stuck (and my stack is overflowing =) What are the minimum WinAPI call I need to use to launch a program given a username and a sessionid? Any code examples in C/C++, .NET would be very helpful

  Read the article

• ISA Server dropping packets as it believes they are spoofed

  - by RB

  We have ISA Server 2004 running on Windows Server 2003 SP2. It has 2 NICs - one internal called LAN on 192.168.16.2, with a subnet of 255.255.255.0, and one external called WAN on 93.x.x.2. The default gateway is 93.x.x.1 (our modem). This machine also accepts VPN connections. We are having a problem with a scanner, which is trying to save a scan into a network share. Every time we try to scan, ISA Server logs the following Denied Connection Log type: Firewall service Status: A packet was dropped because ISA Server determined that the source IP address is spoofed. Rule: Source: Internal ( 192.168.16.54:1024) Destination: Internal ( 192.168.16.255:137) Protocol: NetBios Name Service Pinging 192.168.16.54 from the ISA Server works fine. In ISA Server, going into Configuration → Networks, there are 5 Networks : - External (inbuilt) - Internal (defined as 192.168.16.0 → 192.168.16.255) - Local Host (inbuilt) - Quarantined VPN Clients (inbuilt) - VPN Clients (inbuilt) Finally, under Network Connections → Advanced → Advanced Settings..., the connections are in the following order : - LAN - WAN - [Remote Access Connections] If we try to scan onto a workstation it works fine. Please let me know if you need any more info - many thanks. RB.

  Read the article

• Load balancing a Windows File Share using HA-Proxy

  - by NathanE

  After pulling my hair out over DFS I just had this weird and potentially dangerous idea come into my head whereby, just possibly, I might be able to use HA-Proxy to load balance a file share between servers. I've done some remedial packet traces and it does appear that TCP port 445 is the only thing involved in using Windows file sharing. I've always thought for many years that UDP 139, 135 etc were also involved in at least establishing the connection - but apparently not! So I setup a basic test: listen SMBTest *:445 mode tcp server Smb1 172.16.61.201:445 server Smb2 172.16.61.202:445 And you'll never guess what... it works??? (!) Now obviously there is the whole concern about synchronisation between the file servers (of course). That could easily be taken care of with a little bit of Robocopy script. And considering I only need a HA read-only file share there wouldn't be any issues with regard to file locking etc. Can anyone tell me if what I'm playing with here is fire? I really didn't think it would work at all and now I'm a little shocked. What would be the downsides? Could this be relied upon for a production environment?

  Read the article

• How does Windows 7 DNS client work?

  - by Mark Allison

  I am using a local DHCP and DNS server on my home network on a linux machine. It is running CentOS 6.3 with dnsmasq 2.48. It's all working fine except for local DNS lookups for Windows machines only. I have a mix of Ubuntu, CentOS and Windows machines on the network, some virtual, some physical. I have a machine called boron and the domain is called localdomain If I ping boron from any linux machine, I get [root@lithium lists]# ping -c3 boron PING boron.localdomain (10.0.0.5) 56(84) bytes of data. 64 bytes from boron.localdomain (10.0.0.5): icmp_seq=1 ttl=64 time=0.740 ms 64 bytes from boron.localdomain (10.0.0.5): icmp_seq=2 ttl=64 time=0.478 ms 64 bytes from boron.localdomain (10.0.0.5): icmp_seq=3 ttl=64 time=0.458 ms --- boron.localdomain ping statistics --- 3 packets transmitted, 3 received, 0% packet loss, time 2000ms rtt min/avg/max/mdev = 0.458/0.558/0.740/0.131 ms If I do it from my Windows 7 machine, I get: Ping request could not find host boron. Please check the name and try again. If I try ping boron.localdomain I get: Pinging boron.localdomain [67.215.65.132] with 32 bytes of data: Reply from 67.215.65.132: bytes=32 time=16ms TTL=57 Reply from 67.215.65.132: bytes=32 time=188ms TTL=57 Reply from 67.215.65.132: bytes=32 time=15ms TTL=57 Reply from 67.215.65.132: bytes=32 time=14ms TTL=57 Ping statistics for 67.215.65.132: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 14ms, Maximum = 188ms, Average = 58ms which is clearly wrong. Why is it going out to the internet? Why can't my windows machine resolve the boron hostname to a FQDN? My Windows machines and linux machines get their network config from DHCP. UPDATE If I do ipconfig /all in Windows, it looks as I would expect: Windows IP Configuration Host Name . . . . . . . . . . . . : lanthanum Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No DNS Suffix Search List. . . . . . : .localdomain Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : .localdomain Description . . . . . . . . . . . : Realtek PCIe GBE Family Controller Physical Address. . . . . . . . . : 50-E5-49-38-FC-A2 DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IPv4 Address. . . . . . . . . . . : 10.0.0.57(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Lease Obtained. . . . . . . . . . : 23 August 2012 13:58:45 Lease Expires . . . . . . . . . . : 24 August 2012 07:58:48 Default Gateway . . . . . . . . . : 10.0.0.6 DHCP Server . . . . . . . . . . . : 10.0.0.6 DNS Servers . . . . . . . . . . . : 10.0.0.6 208.67.222.222 208.67.220.220 NetBIOS over Tcpip. . . . . . . . : Enabled When I do an nslookup I get: Server: carbon.localdomain Address: 10.0.0.6 *** carbon.localdomain can't find boron: Unspecified error However if I do ifconfig -a in Linux I get: [root@nitrogen ~]# ifconfig -a eth0 Link encap:Ethernet HWaddr 00:0C:29:AF:EC:2A inet addr:10.0.0.7 Bcast:10.0.0.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:187687 errors:0 dropped:0 overruns:0 frame:0 TX packets:5857 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:23910700 (22.8 MiB) TX bytes:712964 (696.2 KiB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:329894 errors:0 dropped:0 overruns:0 frame:0 TX packets:329894 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:67153143 (64.0 MiB) TX bytes:67153143 (64.0 MiB) and nslookup: [root@nitrogen ~]# nslookup boron Server: 10.0.0.6 Address: 10.0.0.6#53 Name: boron Address: 10.0.0.5 Both machines are on the same network using the same DHCP server. UPDATE 2 I thought the issue was resolved but I am getting intermittent DNS resolving issues but only on my Windows 7 machine. All my linux boxes are fine. This is what happens when I ping and nslookup from Windows to a Windows 2008 Server: C:\Users\mark>nslookup magnesium Server: carbon.localdomain Address: 10.0.0.6 Name: magnesium.localdomain Address: 10.0.0.12 C:\Users\mark>ping magnesium Pinging magnesium.localdomain [67.215.65.132] with 32 bytes of data: Reply from 67.215.65.132: bytes=32 time=267ms TTL=57 Reply from 67.215.65.132: bytes=32 time=162ms TTL=57 Reply from 67.215.65.132: bytes=32 time=510ms TTL=57 Reply from 67.215.65.132: bytes=32 time=146ms TTL=57 Ping statistics for 67.215.65.132: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 146ms, Maximum = 510ms, Average = 271ms And from Linux: [root@beryllium ~]# ping -c4 magnesium PING magnesium.localdomain (10.0.0.12) 56(84) bytes of data. 64 bytes from magnesium.localdomain (10.0.0.12): icmp_seq=1 ttl=128 time=0.176 ms 64 bytes from magnesium.localdomain (10.0.0.12): icmp_seq=2 ttl=128 time=0.634 ms 64 bytes from magnesium.localdomain (10.0.0.12): icmp_seq=3 ttl=128 time=0.685 ms 64 bytes from magnesium.localdomain (10.0.0.12): icmp_seq=4 ttl=128 time=0.263 ms --- magnesium.localdomain ping statistics --- 4 packets transmitted, 4 received, 0% packet loss, time 3002ms rtt min/avg/max/mdev = 0.176/0.439/0.685/0.223 ms [root@beryllium ~]# nslookup magnesium Server: 10.0.0.6 Address: 10.0.0.6#53 Name: magnesium.localdomain Address: 10.0.0.12 UPDATE 3 I stopped the Windows DNS client on my Windows 7 machine with net stop dnscache and it is now working fine. It would be nice to get DNS working with the DNS client on, but I might be OK without it, what do you think?

  Read the article

• Appscript to write iTunes artwork

  - by Kartik Aiyer

  I'm trying to capture artwork from a pict file and embed into a track on iTunes using python appscript. I did something like this: imFile = open('/Users/kartikaiyer/temp.pict','r') data = imFile.read() it = app('iTunes') sel = it.current_track.get() sel.artworks[0].data_.set(data[513:]) I get an error OSERROR: -1731 MESSAGE: Unknown object Similar applescript code looks like this: tell application "iTunes" set the_artwork to read (POSIX file "/Users/kartikaiyer/temp.pict") from 513 as picture set data of artwork 1 of current track to the_artwork end tell I tried using ASTranslate but it never instantiates 'the_artwork' and then throws an error when there is a reference to the_artwork. Can anyone help. I'm new to appscript and python in general.

  Read the article

• A regex for version number parsing

  - by ajborley

  Hi, I have a version number of the following form: version.release.modification where version, release and modification are either a set of digits or the '*' wildcard character. Additionally, any of these numbers (and any preceding .) may be missing. So the following are valid and parse as: 1.23.456 = version 1, release 23, modification 456 1.23 = version 1, release 23, any modification 1.23.* = version 1, release 23, any modification 1.* = version 1, any release, any modification 1 = version 1, any release, any modification * = any version, any release, any modification But these are not valid: *.12 *123.1 12* 12.*.34 Can anyone provide me a not-too-complex regex to validate and retrieve the release, version and modification numbers? Many thanks! Thanks for all the responses! This is ace :) Based on OneByOne's answer (which looked the simplest to me), I added some non-capturing groups (the '(?:' parts - thanks to VonC for introducing me to non-capturing groups!), so the groups that do capture only contain the digits or * character. ^(?:(\d+)\.)?(?:(\d+)\.)?(\*|\d+)$ Many thanks to everyone!

  Read the article

• publickey authentication only works with existing ssh session

  - by aaron

  publickey authentication only works for me if I've already got one ssh session open. I am trying to log into a host running Ubuntu 10.10 desktop with publickey authentication, and it fails when I first log in: [me@my-laptop:~]$ ssh -vv host ... debug1: Next authentication method: publickey debug1: Offering public key: /Users/me/.ssh/id_rsa ... debug2: we did not send a packet, disable method debug1: Next authentication method: password me@hosts's password: And the /var/log/auth.log output: Jan 16 09:57:11 host sshd[1957]: reverse mapping checking getaddrinfo for cpe-70-114-155-20.austin.res.rr.com [70.114.155.20] failed - POSSIBLE BREAK-IN ATTEMPT! Jan 16 09:57:13 host sshd[1957]: pam_sm_authenticate: Called Jan 16 09:57:13 host sshd[1957]: pam_sm_authenticate: username = [astacy] Jan 16 09:57:13 host sshd[1959]: Passphrase file wrapped Jan 16 09:57:15 host sshd[1959]: Error attempting to add filename encryption key to user session keyring; rc = [1] Jan 16 09:57:15 host sshd[1957]: Accepted password for astacy from 70.114.155.20 port 42481 ssh2 Jan 16 09:57:15 host sshd[1957]: pam_unix(sshd:session): session opened for user astacy by (uid=0) Jan 16 09:57:20 host sudo: astacy : TTY=pts/0 ; PWD=/home/astacy ; USER=root ; COMMAND=/usr/bin/tail -f /var/log/auth.log The strange thing is that once I've got this first login session, I run the exact same ssh command, and publickey authentication works: [me@my-laptop:~]$ ssh -vv host ... debug1: Server accepts key: pkalg ssh-rsa blen 277 ... [me@host:~]$ And the /var/log/auth.log output is: Jan 16 09:59:11 host sshd[2061]: reverse mapping checking getaddrinfo for cpe-70-114-155-20.austin.res.rr.com [70.114.155.20] failed - POSSIBLE BREAK-IN ATTEMPT! Jan 16 09:59:11 host sshd[2061]: Accepted publickey for astacy from 70.114.155.20 port 39982 ssh2 Jan 16 09:59:11 host sshd[2061]: pam_unix(sshd:session): session opened for user astacy by (uid=0) What do I need to do to make publickey authentication work on the first login? NOTE: When I installed Ubuntu 10.10, I checked the 'encrypt home folder' option. I'm wondering if this has something to do with the log message "Error attempting to add filename encryption key to user session keyring"

  Read the article

• Force local IP traffic to an external interface

  - by calandoa

  I have a machine with several interfaces that I can configure as I want, for instance: eth1: 192.168.1.1 eth2: 192.168.2.2 I would like to forward all the traffic sent to one of these local addresses through the other interface. For instance, all requests to an iperf, ftp, http server at 192.168.1.1 should be not just routed internally, but forwarded through eth2 (and the external network will take care of re-routing the packet to eth1). I tried and looked at several commands, like iptables, ip route, etc... but nothing worked. The closest behavior I could get was done with: ip route change to 192.168.1.1/24 dev eth2 which send all 192.168.1.x on eth2, except for 192.168.1.1 which is still routed internally. May be I could then do NAT forwarding of all traffic directed to fake 192.168.1.2 on eth1, rerouted to 192.168.1.1 internally? I am actually struggling with iptables, but it is too tough for me. The goal of this setup is to do interface driver testing without using two PCs. I am using Linux, but if you know how to do that with Windows, I'll buy it!

  Read the article

< Previous Page | 109 110 111 112 113 114 115 116 117 118 119 120  | Next Page >