Search Results

Search found 31421 results on 1257 pages for 'software performance'.

Page 1135/1257 | < Previous Page | 1131 1132 1133 1134 1135 1136 1137 1138 1139 1140 1141 1142  | Next Page >

• Can I take my ReadyNAS drive in Raid1 and plug it straight into new different machine?

  - by jacko

  I would assume that I can just take my HDD out of my NAS (in raid1 mirror) and plug it into another enclosure and have it work off the bat but I'd like to make sure... Any ideas? Edit: My current setup is a Netgear ReadyNAS in (hardware) raid1. I'm hoping to replace this with a home theatre type PC (possibly running Ubuntu), and would like to migrate my data without having to do a bulk transfer over my network between the 2 machines. Can anyone confirm the case for the Netgear ReadyNAS? Edit: Ok after further reading it seems that the ReadyNAS Duo formats my drive as ext3 in 16k blocks. There are instructions for mounting a drive into a linux box here: Mounting Sparc-based ReadyNAS Drives in x86-based Linux There is also talk about a linux image here: ReadyNAS Data Recovery - VMware recovery tool I'm not sure whether this means they ReadyNAS actually implements software raid under the hood, or what? So it appears like it IS do-able, but do any of you linux guru's know whether this is viable and whether the fact that they are in raid 1 affect matters?

  Read the article

• Centos Server/MySQL server problem

  - by Jake

  Hello all, I currently run a website we get about 15,000-20,000 hits a day. We currently run a very active forum, that is hosted using Vbulletin software. We have 4.5 Million Posts, 80,000 Threads, with about 11,000 members of which just under a third is active all the time. Now I am running a Intel Xeon Quad Core (2.13Ghz) with 4GB of RAM, Centos 5.5 and running DirectAdmin on the box to manage it. I also run the current stable version of Apache, MySQL, and php. This is the only site that is hosted on this machine. Now during random times of day sometimes when it gets busy the server load can get to like 20, but this can also happen when we only have like 200 users active too. I dont understand what is causing these problems. Sometimes I get pages that can generate in .2 seconds other times it takes like 5-8 seconds. I have customized the my.cnf file and that has not helped out anything, I didnt know where else to turn so if anyone has any suggestions please let me know. Thank You In advance.

  Read the article

• Sporadic email delivery to one user

  - by minamhere

  I have a user that occasionally does not receive emails from outside our organization. It does not seem to matter whether the other person is replying to an initial email or sending a new message. I have checked the Exchange System Manager and there is no record of the sender at all during this time period. No record of the message getting captured by the spam software (GFI Mail Essentials). The sender does not receive an NDR or any other indication that the message didn't arrive. It seems to me that these messages are not even getting to our servers at all. But, this is only impacting one user(that I am aware of) and not all the time. Some messages get through without any problem, others just disappear. The senders are not related at all. One is in another country, one uses AOL, one uses a corporate Exchange server locally. I can't seem to find a pattern. Where else can I look to try to figure out where these messages are going/getting captured? Are there additional logs that I can enable either within GFI or Exchange that might shed some light on this? Thanks. We are using Exchange 2003 on Server 2003. Desktop client is Outlook 2003 on Windows XP Pro.

  Read the article

• Private staff network within public network

  - by pianohacker

  I'm the sysadmin at a small public library. Since I got here a few years ago, I've been trying to set up the network in a secure and simple way. Security is a little tricky; the staff and patron networks need to be separated, for security reasons. Even if I further isolated the public wireless, I'd still rather not trust the security of our public computers. However, the two networks also need to communicate; even if I set up enough VMs so they didn't share any servers, they need to use the same two printers at the very least. Currently, I'm solving this with some jerry-rigged commodity equipment. The patron network, linked together by switches, has a Windows server connected to it for DNS and DHCP and a DSL modem for a gateway. Also on the patron network is the WAN side of a Linksys router. This router is the "top" of the staff network, and has the same Windows server connected on a different port, providing DNS and DHCP, and another, faster DSL modem (separate connections are very useful, especially as we heavily depend on some cloud-hosted software). tl;dr: We have a public network, and a NATed staff network within it. My question is; is this really the best way to do this? The right equipment would likely make my job easier, but anything with more than four ports and even rudimentary management quickly becomes a heavy hit on our budget. (My original question was about an ungodly frustrating DHCP routing issue, but I thought I'd ask whether my network was broken rather than asking about the DHCP problem and being told my network was broken.)

  Read the article

• Windows 7 Printing Issue

  - by Adrian Godong

  I am using Windows 7 RTM x64. From Control Panel Devices and Printers, I have three printers listed; Fax, XPS Writer, and a Lexmark. I can print a test page through the printer properties with no problem. I can print a text file from Notepad with no problem. I can't print from Safari. When I press Ctrl+P, it displays the Print dialog, press OK and nothing happened. I can't print from Adobe Reader. When I press Ctrl+P, it complains that it there is no printer installed. I can't print from Office applications. When I press Ctrl+P, it crashes immediately. Running Office Diagnostics does not help. I can't print from IE8. When I press Ctrl+P, it displays the Print dialog, complains that I have to select a printer from the list, selected any of the three printers, the Print button is disabled. Any help? Update (01/11/2009): The default printer is the Lexmark. I'm testing on this one as well. I was about to reinstall Office (as this is the first application that has the problem), but then I tried other, some behave similarly but not identical (maybe caused by different printing implementation). On those applications that is able to display printer selection dialog, I tried the Lexmark and XPS. Neither printed anything (paper for Lexmark, file for XPS). Update (01/12/2009): It seems that my Windows installation is botched. A colleague have similar hardware/software combination (it's the same workstation model and Windows 7 x64) and his can print perfectly fine. I tried adding the printer from his share, no joy. I can test print from the printer property, I can print from Notepad, but not from any other application.

  Read the article

• Resuming downloads in Firefox

  - by Kim

  Unfortunately, Firefox still has failed to add the option to resume downloads. I've ran into this problem SO MANY times, and in my previous searches I found posts saying Firefox was going to fix that. As of 3.6.3 they haven't. I just tried Free Download Manager (FDM), again, having the Firefox addon Flashgot use it. The download gets passed to FDM, and fails, giving the error message "access denied, invalid username or password." No password was required. The site I'm trying to get the file from is turbobit.net, which limits downloads speeds to 100kb/sec, and has a 59 second countdown before you get the link. I guess it's transparently using a password on their end. If I just download normally (save to disk) the download starts fine, but it fails after 30 minutes to 1 hour (always different), and my Wi-fi connection will stop briefly - and I have to start all over. So I will never be able to download a large file. I also tried DTA instead of FMD with Flashgot, and I get an "access denied" message in DTA. Again, I reloaded - waited the 59 seconds, and download w/Firefox, and the download starts fine. The failure message in the Firefox Downloads window is "source file at http... could not be read." Any help would be greatly appreciated. When is Firefox going to finally add the ability to resume downloads????? Is there some other software I haven't found using Google that will work?

  Read the article

• serving mp3s to mobile devices is flooding nginx with partial requests

  - by drumfire

  I am serving mp3s with a minimalistic nginx server. What I see in my log files is that there are a lot of requests, in particular from AppleCoreMedia and sometimes Android useragents, that flood the server with short requests. Sometimes they keep requesting to download the same partial content for a very long time; sometimes more than an hour. For example: "GET /somefile.mp3 HTTP/1.1" 206 33041 "AppleCoreMedia/1.0.0.9B206 (iPhone; U; CPU OS 5_1_1 like Mac OS X; en_us)" "GET /somefile.mp3 HTTP/1.1" 206 33041 "AppleCoreMedia/1.0.0.9B206 (iPhone; U; CPU OS 5_1_1 like Mac OS X; en_us)" "GET /somefile.mp3 HTTP/1.1" 206 33041 "AppleCoreMedia/1.0.0.9B206 (iPhone; U; CPU OS 5_1_1 like Mac OS X; en_us)" [...] I also get a lot, but not as much, of these: "-" 400 0 "-" "-" 400 0 "-" The IP addresses are always from clients that start downloading shortly after that request, usually they have roughly the same UserAgent as in the first example. emphasized text I have enabled server throttling and connection limits in nginx to limit the huge amount of log entries from equivalent IPs at least somewhat. There was a performance issue when I saw the same behaviour on the previous server that used Apache. I installed nginx on a better server then moved the site. When Apache could not handle more connections from the increasing number of clients effectively that server was ddossed. There was no bandwidth issue with already connected clients and I don't know if the already connected clients were using more than one connection at a time. Please tell me: Are clients that appear to get stuck on a download a Bad Thing™ I heard people say their mobile bandwidth use was much higher than they could account for. I'm thinking this type of client behaviour can account for that. And costs us more bandwidth too. Which up to date alternatives exist out there that can handle serving this type of data better than plain HTTP? Useful general insights for someone who just came into this field straight out of the late 90s. :-)

  Read the article

• Are there any Graphical PowerShell tools?

  - by Dai

  As a developer for the .NET platform, I like to "explore" a platform, framework or API by browsing through the API documentation which explains what everything is - everything is covered and when I use tools like Reflector or Object Browser then I get to know for certain what I'm working with. When I'm writing my own software I can use tools like the Object Test Bench to explore and work with my classes directly. I'm looking for something similar, but for PowerShell - and ones that avoid text-mode. PowerShell is nice, and there are a lot of cool "discoverability"-things it has, such as the "Verb-Noun" syntax, however when I'm working with Exchange Server, for example, I wanted to get a list of AD Permissions on a Receive Connector and I got this list: [PS] C:\Windows\system32>Get-ADPermission "Client SVR6" -User "NT AUTHORITY\Authenticated Users" | fl User : NT AUTHORITY\Authenticated Users Identity : SVR6\Client SVR6 Deny : False AccessRights : {ExtendedRight} IsInherited : False Properties : ChildObjectTypes : InheritedObjectType : InheritanceType : All User : NT AUTHORITY\Authenticated Users Identity : SVR6\Client SVR6 Deny : False AccessRights : {ExtendedRight} IsInherited : False Properties : ChildObjectTypes : InheritedObjectType : InheritanceType : All User : NT AUTHORITY\Authenticated Users Identity : SVR6\Client SVR6 Deny : False AccessRights : {ExtendedRight} IsInherited : False Properties : ChildObjectTypes : InheritedObjectType : InheritanceType : All User : NT AUTHORITY\Authenticated Users Identity : SVR6\Client SVR6 Deny : False AccessRights : {ExtendedRight} IsInherited : False Properties : ChildObjectTypes : InheritedObjectType : InheritanceType : All User : NT AUTHORITY\Authenticated Users Identity : SVR6\Client SVR6 Deny : False AccessRights : {ExtendedRight} IsInherited : False Properties : ChildObjectTypes : InheritedObjectType : InheritanceType : All User : NT AUTHORITY\Authenticated Users Identity : SVR6\Client SVR6 Deny : True AccessRights : {ReadProperty} IsInherited : True Properties : {ms-Exch-Availability-User-Password} ChildObjectTypes : InheritedObjectType : ms-Exch-Availability-Address-Space InheritanceType : Descendents [PS] C:\Windows\system32> Note how the first few entries contain identical text - there's no way to tell them apart easily. But if there was a GUI presumably it would let me drill-down into the differences better. Are there any tools that do this?

  Read the article

• Avoid "privacy pitfalls" in Windows and Linux?

  - by Somebody still uses you MS-DOS

  I have a Windows and a Linux machine. In Windows, everytime I visit a site, a lot of cache/history files are created on my machine. I setup my Firefox to don't save anything. ...but Windows saves a lot of "temp" files, some strange files I opened in registry (like video names). Each video I open in VLC is shown in "Last shown videos". In windows, all files opened can be found at "Recent opened files" as well. A lot of these privacy configurations can be tweaked (VLC and "Recent opened files" in Windows) - it's a PITA doing it individually, but it's possible - but there isn't a guide to these "internal" privacy traces that are left on Windows installation. In Linux, I just know there are these problems in app level (like VLC). My question is: is there a complete guide to avoid undesirable traces of what I did/watch/used in my Windows machine? (Delete everytime the PC is restarted, or even avoiding recording these info at all) Is there a website with configuration guides to different types of software? I would like to know about Linux privacy pitfalls as well.

  Read the article

• HOW TO save Contacts from iPhone to Computer?

  - by goodm

  Step 1: Download [b]Tansee iPhone Transfer Contact[/b] free trial version [url="http://softseeking.com/prodail.aspx?proid=47"]here[/url],then install the software (skip if done yet). u can download at:[url="http://www.softseeking.com/prodail.aspx?proid=47"]http://www.softseeking.com/prodail.aspx?proid=47[/url] Step 2: Connect iPhone to your computer. Step 3: Run Tansee iPhone Transfer Contact , your contacts on iPhone memory will display as shown in your iPhone screen automatically as fig 1. Click on single name, all his or her information will display as fig 2 shown. Step 4-a: In fig 1 situation, you can click button "Copy" to copy all contacts from your iPhone to your computer , then select options: 1: Choose File Type: backup to TXT file, ANTC file or CSV file; 2: Choose File Path: You can change the backup path if you do not use default path. 3: Advanced Option: if you choose ANTC format in step 1, you can add a password to protect the file. Note: We do not know the password, so please do remember it. Click OK Button to finish the Copy. See fig 3. Note: You can only copy the first 5 contacts with trail version.[/SIZE] [/SIZE] [size=3][size=3]Step 4-b: In fig 2 situation, click button "Copy Contact From who" to copy contact of a single person, select options: 1: Choose File Type: Backup contacts to TXT file, and CSV file in single contact transfer; 2: Choose File Path: You can change the backup path if you do not use default path; 3: Advanced Option: Disabled in single contact transfer. Click OK Button to finish the Copy. See fig 4. Note: You can only copy the first 5 contacts in trail version.[/size] [/size]

  Read the article

• Sonicwall NSA 240, Configured for LAN and DMZ, X0 and X2 on same switch - ping issues

  - by Klaptrap

  Our Sonicwall vendor supplied and networked the NSA240 when we required a DMZ in our infrastructure. This was configured and appeared correct although VPN users periodically dropped DNS and Terminal Services. The vendor could not resolve and so the call was escalated to Sonicwall. The Sonicwall support engineer took a look and concluded that the X0 (LAN) and X2 (DMZ) intefaces were cabled to the same switch and so this is the issue. What he observed is a ping request to the LAN Domain Controller, from a connected VPN user, is forwarded (x0) from the VPN client IP to the DC IP but the ping response from the DC IP to the VPN client IP is on X2, a copy of the log is detailed below:- 02/02/2011 10:47:49.272 X1*(hc) X0 192.168.1.245 192.168.1.8 IP ICMP -- FORWARDED 02/02/2011 10:47:49.272 -- X0* 192.168.1.245 192.168.1.8 IP ICMP -- FORWARDED 02/02/2011 10:47:49.272 X2*(i) -- 192.168.1.8 192.168.1.245 IP ICMP -- Received X0 - LAN X1 - WAN X2 - DMZ The Sonicwall engineer concluded that we either need a seperate switch for X2 or we use a VLAN switch for both. I am the companies software engineer and we have yet to have heard back from the vendor, so I am lost at sea at the moment. Do we need to buy this additional equipment or is there another configuration on the NSA240 we can use?

  Read the article

• Looking for a host based network monitor solution

  - by Ole Martin Handeland

  Hi all! Problem So, my hosting company has a network usage graph for my dedicated server. It seems that one day earlier this month, my network usage suddenly spiked with several hundred megabytes transferred (usually it's in the tens, not hundreds). It was probably me, but i just can't be sure who or what it was. Question So my question is; does anyone know of any host based solution for monitoring network usage that would tell me the client's IP-address, the port/service he/she used? What I don't want I'm just guessing that someone will suggest i use nagios, munin, zabbix, cacti, mrtg - I've also looked at those, but a graph over network usage will not give me the answers I'm looking for. :-) Almost there I've already looked at a lot of monitoring solutions, and I've tried [ntop][http://www.ntop.org/], [darkstat][http://unix4lyfe.org/darkstat/] and others. Darkstat just didn't give me the answers. Although it listed a lot of statistics, and i could list the clients - it doesn't show me the network usage for a particular period. Ntop is by far the best I've seen so far - but i think it mostly shows current network usage, not the historical part. I could run apt-get upgrade and download a whole bunch of software, but not see it in the log afterwards.

  Read the article

• Adaptec 5805 not recognized after reboot

  - by Rakedko ShotGuns

  After rebooting the system, the controller is not recognized. It only works if the computer is shut down and turned off. I have recently updated the firmware to "Adaptec RAID 5805 Firmware Build 18948". How do I fix the problem? Configuration summary --------------------------- 1. Server name.....................raid_test Adaptec Storage Manager agent...7.31.00 (18856) Adaptec Storage Manager console.7.31.00 (18856) Number of controllers...........1 Operating system................Windows Configuration information for controller 1 ------------------------------------------------------- Type............................Controller Model...........................Adaptec 5805 Controller number...............1 Physical slot...................2 Installed memory size...........512 MB Serial number...................8C4510C6C9E Boot ROM........................5.2-0 (18948) Firmware........................5.2-0 (18948) Device driver...................5.2-0 (16119) Controller status...............Optimal Battery status..................Charging Battery temperature.............Normal Battery charge amount (%).......37 Estimated charge remaining......0 days, 16 hours, 12 minutes Background consistency check....Disabled Copy back.......................Disabled Controller temperature..........Normal (40C / 104F) Default logical drive task priority High Performance mode................Dynamic Number of logical devices.......1 Number of hot-spare drives......0 Number of ready drives..........0 Number of drive(s) assigned to MaxCache cache0 Maximum drives allowed for MaxCache cache8 MaxCache Read Cache Pool Size...0 GB NCQ status......................Enabled Stay awake status...............Disabled Internal drive spinup limit.....0 External drive spinup limit.....0 Phy 0...........................No device attached Phy 1...........................No device attached Phy 2...........................No device attached Phy 3...........................1.50 Gb/s Phy 4...........................No device attached Phy 5...........................No device attached Phy 6...........................No device attached Phy 7...........................No device attached Statistics version..............2.0 SSD Cache size..................0 Pages on fetch list.............0 Fetch list candidates...........0 Candidate replacements..........0 69319...........................31293 Logical device..................0 Logical device name............. RAID level......................Simple volume Data space......................148,916 GB Date created....................09/19/2012 Interface type..................Serial ATA State...........................Optimal Read-cache mode.................Enabled Preferred MaxCache read cache settingEnabled Actual MaxCache read cache setting Disabled Write-cache mode................Enabled (write-back) Write-cache setting.............Enabled (write-back) Partitioned.....................Yes Protected by hot spare..........No Bootable........................Yes Bad stripes.....................No Power Status....................Disabled Power State.....................Active Reduce RPM timer................Never Power off timer.................Never Verify timer....................Never Segment 0.......................Present: controller 1, connector 0, device 0, S/N 9RX3KZMT Overall host IOs................99075 Overall MB......................4411203 DRAM cache hits.................71929 SSD cache hits..................0 Uncached IOs....................29239 Overall disk failures...........0 DRAM cache full hits............71929 DRAM cache fetch / flush wait...0 DRAM cache hybrid reads.........3476 DRAM cache flushes..............-- Read hits.......................0 Write hits......................0 Valid Pages.....................0 Updates on writes...............0 Invalidations by large writes...0 Invalidations by R/W balance....0 Invalidations by replacement....0 Invalidations by other..........0 Page Fetches....................0 0...............................0 73..............................10822 8...............................3 46138...........................4916 27184...........................15226 20875...........................323 16982...........................1771 1563............................5317 1948............................2969 Serial attached SCSI ----------------------- Type............................Disk drive Vendor..........................Unknown Model...........................ST3160815AS Serial Number...................9RX3KZMT Firmware level..................3.AAD Reported channel................0 Reported SCSI device ID.........0 Interface type..................Serial ATA Size............................149,05 GB Negotiated transfer speed.......1.50 Gb/s State...........................Optimal S.M.A.R.T. error................No Write-cache mode................Write back Hardware errors.................0 Medium errors...................0 Parity errors...................0 Link failures...................0 Aborted commands................0 S.M.A.R.T. warnings.............0 Solid-state disk (non-spinning).false MaxCache cache capable..........false MaxCache cache assigned.........false NCQ status......................Enabled Phy 0...........................1.50 Gb/s Power State.....................Full rpm Supported power states..........Full rpm, Powered off 0x01............................113 0x03............................98 0x04............................99 0x05............................100 0x07............................83 0x09............................75 0x0A............................100 0x0C............................99 0xBB............................100 0xBD............................100 0xBE............................61 0xC2............................39 0xC3............................69 0xC5............................100 0xC6............................100 0xC7............................200 0xC8............................100 0xCA............................100 Aborted commands................0 Link failures...................0 Medium errors...................0 Parity errors...................0 Hardware errors.................0 SMART errors....................0 End of the configuration information for controller 1

  Read the article

• Visual Studio 2010 won't compile/create new projects

  - by tuner

  My Visual Studio 2010 Professional with SP1 installed won't compile anymore. The shown error is: TRACKER : error TRK0005: Failed to locate: "CL.exe". The system cannot find the file specified. Strangely it is also not possible anymore to create new projects - the wizard appears but just restarts when I press create. As I found out the paths for Visual Studio are now built from settings in the registry. Namely HKEY_CURRENT_USER\Software\Microsoft\VisualStudio. Comparing a colleagues installation with mine revealed no different settings. So this is how the Property Pages/Configuration Properties/VC++ Directories look like: Executable Directories: $(ExecutablePath) Include Directories: $(IncludePath) Reference Directories: $(ReferencePath) Library Directories: $(LibraryPath) Source Directories: $(SourcePath) Exclude Directories: $(ExcludePath) From the Visual Studio 2010 Command Prompt, cl.exe is found. I can only guess that this behavior was caused by a reinstallation of Studio a couple of months ago (to a different folder). As we use an external build-script for our main project there is a good chance that it is broken since then. Any hints?

  Read the article

• Kernel-mode Authentication: 401 errors when accessing site from remote machines

  - by CJM

  I have several Classic ASP sites that use Integrated Windows Authentication and Kerberos delegation. They work OK on the live servers (recently moved to a Server 2008/IIS7 servers), but do not work fully on my development PC or my development server. The IIS on both machines were configured through an IIS web deployment tool package which was exported from an old machine; the deployment didn't work perfectly, and I had to tinker a bit to get the sites working. When accessing the apps locally on either machine, they work fine; when accessing from another machine, the user is prompted by a username/password dialog, and regardless of what you enter, ultimately it results in a 401 (Unauthorised) error. I've tried comparing the configuration of these machines against similar live servers (that all work fine), and they seem generally comparable (given that none of the live servers are yet on IIS7.5 (Windows 7/Server 2008 R2). These applications run in a common application pool which uses a special domain user as it's identity - this user has similar permissions on the live and development machines. On IIS6 platforms, to enable kerberos delegation, I needed to set up some SPNs for this user, and they are still in place (even though I don't believe they are needed any longer for IIS7+ due to kernel-mode authentication), Furthermore, this account is enabled for Kerberos delegation in Active Directory, as is each machine I am dealing with. I'm considering the possibility that the deployment might have made changes/failed to make changes to the IIS configuration thus causing this problem. Perhaps a complete rebuild (minus another web deployment attempt) would solve the problem, but I'd rather fix (thus understand) the current problem. Any ideas so far? I've just had another attempt at fixing this issue, and I've made some progress, but I don't have a complete fix...yet. I've discovered that if I access the sites via IP address (than via NetBIOS name), I get the same dialog, except that it accepts my credentials and thus the application works - not quite a fix, but a useful step. More interestingly, I discovered that if I disable Kernel-mode authentication (in IIS Manager Website Authentication Advanced Settings), the applications work perfectly. My foggy understanding is that this is effectively working in the pre-IIS7 way. A reasonable short-term solution, but consider the following explicit advice from IIS on this issue: By default, IIS enables kernel-mode authentication, which may improve authentication performance and prevent authentication problems with application pools configured to use a custom identity. As a best practice, do not disable this setting if Kerberos authentication is used in your environment and the application pool is configured to use a custom identity. Clearly, this is not the way my applications should be working. So what is the issue?

  Read the article

• Website Use Monitoring for 3 People

  - by linkedlinked

  I work in an IT startup with 2 partners, and I'm the programmer/IT guy -- in other words, the work horse. To make a long story short, I'm doing most of the work right now, while they spend all day on Facebook. That's OK, because they're paying my salary, but if the project fails, I'm sure they'll blame me for it (I'm doing my best to make sure that doesn't happen!), and I want some sort of recourse. I already have an app that blocks time-wasters on my local PC, and keeps logs of when the app is enabled (so I can say "I had Facebook blocked from 9am-5pm today.") Is there any way I can get a brief summary of the most heavily visited sites, split up by client PC? At the end of the month, I want to be able to say "You both load Facebook, on average, every 10 minutes. You spend hours a day on Youtube, and haven't opened up our bugtracker in weeks" and maybe have a nifty chart or graph to match it. We have a crappy D-Link router, and no IT budget. They are both on Windows Vista, I run Ubuntu Linux. I don't want to install any monitoring software on their PC, but I'm totally fine with, say, routing all the network traffic through my machine. I guess I can think of lots of ways to accomplish this (telnet into JSSH and list open tabs? log all the DNS requests, per-domain? even thinking of setting up a webcam on my desk and just keeping 5-minute snapshots...), I just don't really know where to start. Any advice is appreciated, thanks!

  Read the article

• Problems with 5.1 digital out on Ubuntu 12.04

  - by user895319

  I've recently bought a new PC, installed Ubuntu and am now unable to get 5.1 digital sound working. Simple analogue stereo works fine on both the front and rear connectors. On my old box I connected the coax connection from my soundcard to my surround sound amplifier, set Settings-Sound to "Digital Stereo Duplex" and it worked. My old soundcard doesn't fit in my new machine so I'm using the built-in sound hardware. I'm connecting the combination output socket on the back of the PC via the same cable to my surround amp as before. The MB is an MSI Global H61M-P31 with an RealTek ALC887 sound chip. When I go to Settings-Sound I only see "Headphone Built-in Audio" and "Analogue Output Built-in Audio" - no digitial options. The output from aplay -l is: default Playback/recording through the PulseAudio sound server sysdefault:CARD=PCH HDA Intel PCH, ALC887-VD Analog Default Audio Device front:CARD=PCH,DEV=0 HDA Intel PCH, ALC887-VD Analog Front speakers surround40:CARD=PCH,DEV=0 HDA Intel PCH, ALC887-VD Analog 4.0 Surround output to Front and Rear speakers surround41:CARD=PCH,DEV=0 HDA Intel PCH, ALC887-VD Analog 4.1 Surround output to Front, Rear and Subwoofer speakers surround50:CARD=PCH,DEV=0 HDA Intel PCH, ALC887-VD Analog 5.0 Surround output to Front, Center and Rear speakers surround51:CARD=PCH,DEV=0 HDA Intel PCH, ALC887-VD Analog 5.1 Surround output to Front, Center, Rear and Subwoofer speakers surround71:CARD=PCH,DEV=0 HDA Intel PCH, ALC887-VD Analog 7.1 Surround output to Front, Center, Side, Rear and Woofer speakers dmix:CARD=PCH,DEV=0 HDA Intel PCH, ALC887-VD Analog Direct sample mixing device dsnoop:CARD=PCH,DEV=0 HDA Intel PCH, ALC887-VD Analog Direct sample snooping device hw:CARD=PCH,DEV=0 HDA Intel PCH, ALC887-VD Analog Direct hardware device without any conversions plughw:CARD=PCH,DEV=0 HDA Intel PCH, ALC887-VD Analog Hardware device with all software conversions While googling for ALC887 I've seen some references to "ALC887 -VD Analog" and some to "ALC887 -VD Digital". Does anyone know if I need to force it to chance mode somehow? It's worth mentioning that when I set the output to 5.1 digital surround in Windows 7 on the same machine I still don't get any sound so it's not a unique Linux problem. Thanks for any help.

  Read the article

• First web server questions

  - by Graeme

  Hi there, Just looking for some help/suggestions with this. I require my own server for an upcoming project that will be hosting users websites. I want to build a control panel the user can log into and modify their website which will be stored elsewhere on the server. This all seems easy enough, It's just managing domains and emails that confuse me. What should I look for to manage domain names and point them to the correct website and also what would be the best way to manage email accounts/set up new ones etc. I want to avoid cPanel/WHM if possible, I'm looking to control most things through the control panel I will be building. So any suggestions on this would be useful as well, as I will be wanting to add email accounts through php (Can be done using a shell I assume?). I will also be wanting to measure bandwidth used on the websites contained in each users directory, any suggestions on making this possible? I'm really looking for some suggestions on what software to use to set this up, any advice would be really helpful! Thanks, Graeme

  Read the article

• Word 2007 won't run, tries to reinstall, fails with error 1402.

  - by eidylon

  Okay, this problem has been plaguing this computer for a while now. We tried googling, and none of the answers found helped to solve the problem. So, I am now posting the answer here for posterity. Office 2007 Home/Student edition was installed on the computer, running Vista (32-bit). One day, Word just up and stopped working. All the other programs continued to operate as expected. But every time you would click the icon for Word, it would pop up an install dialog, with a message reading "Preparing to install...". After a few minutes of the little progress bar going and going, it errors out, and gives error 1402, something to the effect of unable to access registry key HKEY_Local_Machine\Software\Classes\.wll\.... Searching around, every answer i found had to do with reassigning the permissions on this key, giving full rights to SYSTEM or to Everyone, and propagating the changes down to all sub-keys. When ever this was attempted though, it would tell us that we were unable to access the key due to permissions, even though we had run regedit as Administrator and are logged on with an administrative account. We also tried uninstalling Office and reinstalling it, as well as doing a repair install. Both these attempts also threw the same 1402 error. Also of note was that the executable for Word (winword.exe) was MIA and no longer to be found in the Office install directory.

  Read the article

• Internet Troubles - PPPoE vs PPPoA?

  - by AkkA

  I have been having some internet troubles at home (ADSL2+ connection in Australia). We get random drop-outs from the authentication connection. It will keep the connection to the DSL service, but we lose authentication and either have to restart the router/modem (its combined, a Belkin one, not sure on model number) or unplug the phone cable, wait about 30 seconds and plug it in again. I've called the ISP (Telstra) a few times, but they only offer limited support when we dont use their supported hardware. Apparently something had happened on their side, they checked the box again (at least it sounded that simple), and told me it would be fine. It wasnt. I've replaced all the filters around the house, but that didnt help either. We do live a little bit away from the exchange (get a sync speed of about 3000/900), so I thought it could be due to line noise but that hasnt helped. Telstra allow both PPPoE and PPPoA connections (which I'm configuring through my router, dont have software on the PC side). I've been running PPPoA the whole time, would it make any difference changing it to PPPoE? If not, are there any other theories as to why we would be experiencing these drop-outs? It has been fine for at least 12 months, then suddenly started about 2 months ago.

  Read the article

• How can I allow the Xbox 360 to browse movies on a network drive?

  - by Roger

  I've always been able to stream movies stored on my Windows 7 computer's local hard drive to the Xbox 360 with no problems. A few weeks ago, though, I got a Seagate Dockstar NAS device and moved my movies to it. Ever since then, I can't seem them in the Xbox. I've tried several different things. When I try to add the mapped drive to the Media Player library, it says that it can't share the files. (I don't have any security on the NAS drive). I've tried creating a symlink to a local drive, but that doesn't help. Neither does adding the UNC path directly. The Dockstar seems to have its own Xbox share capability, but it doesn't respect my folder structure - it brings over every video file on the drive in a single list, including several hundred home videos that aren't playable on the Xbox. Is there any way to use Media Player (or the Zune software) to share files stored on a NAS drive? Barring this, is there a lightweight, free server that will allow me to share these files while maintaining my folder structure?

  Read the article

• Arch Linux: How to handle patches which only you will use?

  - by user12932

  I'm using freerdp together with xmonad and it has been giving me a lot of trouble. The super key (or "windows key") is my mod key in xmonad and it has been interfering with my freerdp usage rather annoyingly. Whenever I switched workspaces (or did anything else in xmonad involving the super key), windows (controlled by the freerdp instance in focus) registered a keypress as well. This event combined with the loss of focus got the super key stuck in windows indefinitely: the press of the keys d and r would first show my desktop, then open the run dialog (as if I was pressing the windows key constantly). I've tried several versions of freerdp, but all exhibited this annoying behavior. So I resorted to patching freerdp myself to just ignore the left super key on my keyboard. I love free software for a lot of reasons (especially the ability to alter things like this myself), however I still find it annoying to patch and rebuild freerdp on all version (and dependency) changes. How do you deal with situations like this? Is there even a "right way" to resolve this issue?

  Read the article

• Why do fonts sometimes look "fat" on Mac OS X?

  - by jtimberman

  Sometimes when resuming from suspend, the fonts in Mac OS X look "fatter" than normal. Unfortunately right now I can't get my Macbook Pro to exhibit the "normal" behavior for comparison, it has been abnormal yesterday and today. If I can get screenshots of what I think is 'normal', I'll add them. "Fixing" this has been random. I use an external monitor, and sometimes unplugging it and plugging back in, or even turning it off and back on has worked. Sometimes with the display attached (or not) detecting displays works. Sometimes logging out or rebooting entirely is what it takes. Displays used: Macbook Pro 15" built-in display Dell 27" LCD (2009 model) Software where I see this happen, at least most noticably: Firefox (screenshots below) iTerm Things MacIrssi (screenshots below) I am using Mac OS X 10.5.8. "Abnormal" view from MacIrssi with Inconsolata 16 pt. image full size "Abnormal" view from Firefox. Finally got it to switch back, though after resuming from suspend its back to "fat" :-(. image full size And 'normal' in Firefox:

  Read the article

• Why can't I connect to my router's config page with Windows 7?

  - by user17940

  I've got a Belkin wireless router, and just bought a new Dell computer with Windows 7 pre-installed. I can connect to the Internet and my home network just fine, but when I try to visit my router's configuration page at http://192.168.2.1, I get a "Connection was reset" error. Nothing I do will make the router's configuration page come up in my web browser. More background information: I could always get to the router's config page from my Windows XP machine. I never had any trouble prior to getting this Windows 7 computer. I can ping 192.168.2.1 successfully from my Windows 7 computer. My PC is connected to the router by a physical CAT5 cable, not via wireless. Every device connected to my router, including the new computer, can get to the Internet with no problem. Here are some things that did not solve the problem: I tried turning off IPV6 in Windows. I tried turning off my firewall and antivirus software I tried using https instead of http I tried disabling and then enabling the network connection in Windows I tried reverting my network card driver back to an older version I have tried both Firefox and Internet Explorer web browsers. Has anyone experienced something like this before, and solved it? Thanks a lot for your help!

  Read the article

• hp DL380 G4 won't boot with disk plugged into front USB

  - by Kev

  We outgrew a few older external USB backup drives, and purchased WD My Passport 1 TB USB 3.0 drives to replace them. When they are plugged into the front of our G4, it will blink forever after the BIOS (which is current, BTW) and never boot, even though the USB disks are not "bootable" per se. Our old drives did not exhibit this behaviour (so I don't think it's this type of issue that I've read about other servers.) The old drives were USB 2.0, but this shouldn't make a difference, AFAICT--the specs say all of the G4's USB ports are the same, 2.0, anyway, so I'm not sure how one port would handle a USB 3.0 device better than another. If we plug the new drives in one of the back slots, it boots fine. What's the cause? My concern is that the front USB port, and possibly the motherboard, might be starting to die. (We are experiencing other strange issues with them, or were initially, like intermittent file permissions errors despite wide-open ACL on these local drives, but some serverfault users have me convinced they may be coincidental software/security related issues.)

  Read the article

< Previous Page | 1131 1132 1133 1134 1135 1136 1137 1138 1139 1140 1141 1142  | Next Page >