Search Results

Search found 5262 results on 211 pages for 'commands'.

Page 114/211 | < Previous Page | 110 111 112 113 114 115 116 117 118 119 120 121  | Next Page >

• Kill xserver from command line (init 3/5 does not work)

  - by Richard Martinez

  I'm running Linux Mint 10, although I've had this same issue with other variants of Linux. I've been told/found while researching that if the X server hangs or otherwise errors, one can drop to a root prompt, usually at another tty, and execute init 3 (to drop to single user mode) and then init 5 to return to the default, graphical session. Needless to say, I've tried this before in multiple configurations on multiple machines to no avail. The only feedback I receive form executing those two commands is a listing of VMWare services (from a kernel module) that are stopped and then restarted. Note: If I run startx (either before or after init 3), then I am told that the xserver is still running and that I should remove /tmp/.X0-lock. Having tried that, it removes that error message, but claims that the xserver cannot be attached as another instance is running. How do I kill the xserver completely? Can I killall some process name?

  Read the article

• In Outlook 2010, can you add "Categories" to the "New Email" Ribbon?

  - by Jeff

  I couldn't figure out how to do this in Outlook 2007, and I was hoping I could do it in Outlook 2010... I want the ability to quickly apply a category when composing a new email (typically a "Waiting For..." category) for things that need a response. It is possible to apply a category by clicking the "Options" ribbon, then the little arrow under the More Options section - but why can't I get the nice big "Categories" drop-down that's available in the "Tags" section of the main Outlook window. There are about a kabillion commands in the "Customize Ribbon" dialog box for the New Mail window, but I couldn't find anything about Categories. Should I just give up?

  Read the article

• Force '^C' to be printed when editing current prompt, then aborting it

  - by Stefan Lasiewski

  This is the opposite of Prevent “^C” from being printed when aborting editing current prompt. I'm using Bash. When I'm editing the commandline in Bash, and I hit Control-C to abort the commandline, the '^C' character does not display. I would like to see this character. I tried commands like stty -ctlecho and stty ctlecho (which I borrowed from the other question), but this didn't work for me. This behavior seems to be true with my environment on Ubuntu, CentOS and MacOSX.

  Read the article

• Highlighting subroutines in Notepad++

  - by predatflaps

  I would like to highlight the contents of IF statements in a slightly different colour from the background, so that I can see them more easily. Is it possible in Notepad++? it would be amazing to highlight all the nested subroutines in a function in slightly different light/dark colours depending on the scheme so that you can straightaway see the commands at a glance without spying out the curly brackets. not psychedelic colours, just slightly visible background colour difference. wouldn't it be great? Function Foo(){ highlight one color if(){highlight color2 for(){highlight color3 if (){hilghlight color4 } } } } }

  Read the article

• which command run in cron returns nothing

  - by Zárate

  Hi there, I've written a little utility in haXe + Neko that needs to execute some GIT commands. To avoid hardcoding the path to the GIT executable I'd like to use the which command to find out where it is. Everything works as expected when running manually from the console, but not when the the app runs on a cron job. I'm aware of the restricted environment (here or here) when you run a script using cron, but still surprised this doesn't work: /usr/bin/which git >> /home/user/git.txt The text file is created but the content is empty. Again, when run from the console it works as expected. Any ideas? I'm running OS X Leopard, if that helps. Thanks : ) Juan

  Read the article

• Why does deleting from the command line take significantly less time than from a GUI?

  - by Jordan Plahn

  So this is probably the dumbest question you'll read today, but it's something I just wondered about as I was deleting a dozen or so images from my computer. With a quick rm -rf command on the directory's contents, all the images were gone in a snap. When I drag the same dozen or so images to a trash can/recycle ban, it takes sometimes 10 seconds or more. Now I'm sure some of it comes from the overhead of the GUI and such, and some of it may be the fact that the file still "exists" in some form if it's put into the recycle bin, but is there anything else that accounts for such a huge time disparity? Are "rm" and "delete" just such fundamentally different commands so I'm trying to compare apples and oranges? Enlighten me, please!

  Read the article

• where does windows vista hide the path environment variable?

  - by Bec

  i think that's what i need? i'm not sure i'm trying to run a command line program (BLAST, from NCBI) but it won't recognise the commands (blastall, formatdb, etc.) so i think i need to add the folder the bin is in to the path environment variable? i think that's what i need to do? i think that's what it's called? I think i've been shown this a few times, but i don't need to do it often, so i keep forgetting.

  Read the article

• Passing the output of the last command to sed as an argument

  - by neurolysis

  Hi, Basically, I'm wanting to automate adding something to xorg.conf in the right place, I've used some commands to get the line number of the line I want to manipulate, but I'm not really sure how to go about passing this line number (as an argument and NOT something to be manipulated) to sed. I have been told about xargs and looked at the docs on it, but after some reading and experimentation I can't seem to get it to work. In case anyone can think of a better method entirely, the process I want to automate is just finding the line containing both "Identifier" and "Monitor0" (there will only be one) and adding a line below it. The problem with just finding Monitor0 and manipulating that line is that there are multiple lines with Monitor0 in. I've got this far: fgrep -n "Monitor0" </etc/X11/xorg.conf | fgrep "Identifier" | cut -f1 -d: This gives out the line number which I'm wanting to pass to sed, but I'm not really sure how to do it. ...or is there a simpler way which I'm not seeing? Thanks. :)

  Read the article

• Why would anacron not be running?

  - by Rory

  I have a Ubuntu system that has anacron installed. However I'm pretty sure it's not running. It's not running the commands in /etc/cron.daily to rotate the syslog files (I'm using sysklog, which has its own rotating log method, not using logrotate). The last time the logs were rotated were in October 2009. /var/spool/anacron/cron.daily exists and the contents are 20091015. AFAIR we had a power outage then, and everything rebooted. How can I debug anacron? How can I see why it's not running? My first instinct is to look for /var/log/anacron, but that's not there. How can I fix it to make it run again?

  Read the article

• Find keyword values from PDF [closed]

  - by JukkaA

  I have a lot of PDF reports I'd need to index. They're mostly "text-based PDFs", not images. I know they all have account number in certain format, 123456AAAAA and some other keyword info like addresses, customer names etc. needed in indexing these files. Basically if the file is ab.pdf, I need to create ab.txt that contains: ACC=123456AAAA Customer=John Doe Date=20120808 What would be the best software/solution to generate indexing information for these? I know there's pdftotext, but piping it to different grep/awk commands is a hack... It would be nice to specify an area in PDF to search for the account number, and specify the format it is in.

  Read the article

• Issues with hard disk secure erase

  - by John Watson

  I want to completely wipe all the data and both OSes (Ubuntu and Windows 7) from my hard drive. I tried DBAN but it gives me an error and does not run. I am looking for an alternative. After reading some articles online, I came to know that, using a Linux live CD, it can be done using either of following commands. a) sudo dd if=/dev/zero of=/dev/sda b) sudo shred -vfz -n 1 /dev/sda My questions are 1) Which option (a or b) is more secure (wipes everything) and faster? 2) Does either of the options damage the hard drive or anything? I want to use hard drive again i.e. installing Windows and Ubuntu again.

  Read the article

• How to execute a command on multiple hosts using IPv6 only?

  - by math

  First of all there is pdsh which is essentially a parallel distributed shell which may execute commands on a list of given hosts. However, I find myself in an IPv6 only problem setting. It seems that pdsh is not able to use IPv6, as I am getting error messages: pdsh -w ^hostnames my_command pdsh@myhost: gethostbyname("foobar") failed I also tried to use IPv6 addresses only, which also didn't work. So how do you run a single shell script for administrative purpose (no SGE stuff, or similar) on a bunch of hosts that is IPv6 reachable only?

  Read the article

• Why does MOVE command in DOS treat wildcard patterns oddly in this case?

  - by Adisak

  I am using the "move" command with a wildcard pattern in the CMD prompt under Windows 7. In my source directory, I have the following files: movie1.avi movie1.avi_metadata movie2.avi movie2.avi_metadata If I type the command move source\*.avi dest it will move all four files even though I would expect it to only move the two *.avi files and not the *.avi_metadata files. As expected, move source\*.a dest and move source\*.av dest don't move any files. However when the length of the extension for the wildcard pattern is 3 characters, it will move all extensions that begin with those first three characters. Is this a bug in the "move" command or expected behavior and is it documented anywhere? Edit: John Watts notes that this is probably do to "short" filenames. Is it possible then to make commands in the CMD interpreter only operate on long filenames and to ignore short filenames?

  Read the article

• Ping6 fail on linux

  - by michelemarcon

  I have 2 linux box configured with IPv4. I have tried adding IPv6 to them. I have issued this commands on box1: ip -6 addr add fd32:2d7f:f3c1::1/48 dev eth0 And I get this: inet6 addr: fd32:2d7f:f3c1::1/48 Scope:Global Then I have issued this command on box2: ip -6 addr add fd32:2d7f:f3c2::1/48 dev eth0 Back on box1 (command/response): ping6 fd32:2d7f:f3c1::1 is alive! ping6 fd32:2d7f:f3c2::1 ping6: sendto: Network is unreachable Why doesn't box1 ping box2 (of course, also box2 can't ping box1)?

  Read the article

• How to make a non-root user to use chown for any user group files?

  - by user1877716

  I would like to make a user super powerful, with almost all root rights but unable to touch a the root user (to change the password of the root). My goal is to user "B" to manage my web server. The problem is user B need to able to run the chown and chmod commands on some files belonging to other users. I tried to put B in root group or use visudo, but it's not enough. I'm working an Centos 6 system. If some body have ideas!

  Read the article

• SSH and Latent Connections (e.g., satellite connections)

  - by user71494

  Most of the week I live in the city where I have a typical broadband connection, but most weekends I'm out of town and only have access to a satellite connection. Trying to work over SSH on a satellite connection, while possible, is hardly desirable due to the high latency ( 1 second). My question is this: Is there any software that will do something like buffering keystrokes on my local machine before they're sent over SSH to help make the lag on individual keystrokes a little bit more transparent? Essentially I'm looking for something that would reduce the effects of the high latency for everything except for commands (e.g., opening files, changing to a new directory, etc.). I've already discovered that vim can open remote files locally and rewrite them remotely, but, while this is a huge help, it is not quite what I'm looking for since it only works when editing files, and requires opening a connection every time a read/write occurs. (For anyone who may not know how to do this and is curious, just use this command: 'vim scp://host/file/path/here)

  Read the article

• Are there any Powershell modules specifically for IIS6 administration?

  - by program247365

  I'm looking to manage/administer many IIS6 servers remotely via Powershell (query sites, iis settings, etc). Is this possible? Is there a Microsoft-supported module out there? Or do I have to use WMI-Object/WebAdministration? If so, could some one give me some quick instructions on doing some simple "get info" commands in Powershell to a remote IIS6 machine? (It's frustrating that there is a nice IIS7/Microsoft-supported module out there: http://learn.iis.net/page.aspx/428/getting-started-with-the-iis-70-powershell-snap-in/ But not an IIS6 one easily found.)

  Read the article

• windows 2003 download utility from command line , http or ftp or any other protocol , from one comma

  - by Michael

  Hello , I need to know if there is anyway utility bult-in windows 2003 that I can use from the command line to download a file using only one command. Basically I know that I can download from ftp using the "ftp" utility but in order to do that I need to do first "ftp open" and then pass the other commands so it doesn't help me because I need to do perform the download only from one command. The download may be performed through http, ftp or any other protocol. OS Name: Microsoft(R) Windows(R) Server 2003 Enterprise x64 Editio OS Version: 5.2.3790 Service Pack 2 Build 379 Thank you in advance for any answer !

  Read the article

• Getting error while starting tomcat?

  - by ram

  For my Tomcat installation process case is 1. cd /home/mpatil/Downloads/ 2. tar zxvf apache-tomcat-6.0.37.tar.gz 3. cd apache-tomcat-6.0.37/bin 4. ./startup.sh 5. tail -f /home/mpatil/Downloads/apache-tomcat-6.0.37/logs/catalina.out for `5` command results : [root@localhost bin]# tail -f /home/mpatil/Downloads/apache-tomcat-6.0.37/logs/catalina.out Nov 08, 2013 12:04:04 PM org.apache.catalina.startup.HostConfig deployDirectory INFO: Deploying web application directory docs Nov 08, 2013 12:04:04 PM org.apache.coyote.http11.Http11Protocol start INFO: Starting Coyote HTTP/1.1 on http-8080 Nov 08, 2013 12:04:04 PM org.apache.jk.common.ChannelSocket init INFO: JK: ajp13 listening on /0.0.0.0:8009 Nov 08, 2013 12:04:04 PM org.apache.jk.server.JkMain start INFO: Jk running ID=0 time=0/115 config=null Nov 08, 2013 12:04:04 PM org.apache.catalina.startup.Catalina start INFO: Server startup in 3036 ms and i tried in browser like http://locahost:8080/ nothing comming why.whats the wrong in my command or i did any wrong in my commands pls tel me

  Read the article

• how can I get back /usr/local/bin/mysql on Snow Leopard?

  - by Ole Media

  From terminal and trying to uninstall macports, I ran a command, rm -rf / macports...., that erased bunch of stuff. I feel ashamed about this, not realizing the space after /. Since then, mysql is running but I cannot execute any of the mysql commands because it is not under /usr/local/bin/ I went ahead an reinstall mysql but without luck. What steps do you recommend on doing in order to be able to run mysql, mysqlduml, mysqladmin, from terminal? I can access databases from phpmyadmin, so mysql is running, don't ask me how.

  Read the article

• Using sudo /etc/init.d/httpd start complains for log file rights

  - by SCO

  I created a custom log directory with the root account, and chmoded it to 777 teporarily. ls -la /var/mylogs/log/ total 16 drwxrwxrwx 2 root root 4096 Jun 24 06:27 . drwxr-xr-x 5 root root 4096 Jun 24 06:25 .. When I try to start the service from a user (lets say "myuser", which is in the sudoers files as myuser ALL=(ALL) ALL), it fails because of the permissions : sudo /etc/init.d/httpd start Starting httpd: (13)Permission denied: httpd: could not open error log file /var/mylogs/log/httpd_error.log. Unable to open logs However, the following is successfull : sudo bash /etc/init.d/http start So I guess these two methods are not equivalent, although to me doing sudo was the same than logging into the root account and issuing the commands. Any clue ? Thank you !

  Read the article

• EXEC() syntax error using ODBC

  - by Mike Trader

  I have written a little ETL application that I wish to run a few lines of TSQL from. If i enter a simple query like "SELECT * FROM MyTable" everything is fine. All single line commands run as expected. A multiline query like this is also fine: DECLARE @TableName NVARCHAR(MAX) set @TableName = 'MyTable' EXECute ( 'DROP TABLE '+ @TableName ) Howevery when I try and run: DECLARE @TableName NVARCHAR(MAX) OPEN Tables FETCH NEXT FROM Tables INTO @TableName WHILE @@FETCH_STATUS = 0 BEGIN EXEC( 'DROP TABLE ' + @TableName ) FETCH NEXT FROM Tables INTO @TableName END I get a syntax error after TABLE in the EXEC() call. I have spent 6 hours trying to figure this out thinking perhaps I need to escape the single quote or something. I just cannot see the problem. A set of fresh eyes would be appreciated.

  Read the article

• Notepad++'s pesky EOL Format switching -- how to remove the invisible (default?) keyboard shortcuts Ctrl+M, Ctrl+J

  - by AKE

  Notepad++ lets the user specify whether the end of lines (EOL) format for a file should be entirely in Windows, Unix, or Mac formats. Notepad++ also remember the last one encountered in a file and uses that EOL format when a new file is created. But Notepad++ seems to have some pesky default keyboard shortcuts built-in that can create MIXED format files, creating havoc with this otherwise quite reasonable situation. Specifically: - Ctrl+M puts a Mac style EOL, i.e. (0x0D only), - Ctrl+J puts a UNIX style EOL, i.e. (0x0A only), The hazard is that rapid typing and using the keyboard heavily with other shortcut commands could inadvertantly mean typing oone of these above, each time turning at least one line in the file into another EOL format. So my Question: How can I turn OFF these apparently built-in keyboard shortcuts. Please Note: I've already scanned through Settings > Shortcut Mapper and could not find Ctrl+M or Ctrl+J listed for EOL conversion. Thanks,

  Read the article

• Squid3 not working. Access denied

  - by Nitish

  I installed SQUID3 on a Linux machine with two ethernet interfaces (eth0 and eth1). I used the default settings in the squid.conf file and uncommented the two lines acl localnet src 192.168.0.0/16 and http_access allow localnet. eth0 is connected to a router, which provides Internet access. It is assigned an IP 192.168.1.2 by the router. I manually configured eth1 to have an IP address 192.168.5.1. It is connected to a switch. Systems having IP addresses 192.168.5.x are connected to this switch. I ran these two commands for NAT: iptables -t nat -A PREROUTING -i eth1 -p tcp -m tcp --dport 80 -j DNAT --to-destination 192.168.5.1:3128 iptables -t nat -A PREROUTING -i eth0 -p tcp -m tcp --dport 80 -j REDIRECT --to-ports 3128 But when I try to access internet from a system having IP 192.168.5.2 through the proxy I get an error that says "Access denied". What is wrong with my configuration?

  Read the article

• How to restrict ssh port forwarding, without denying it?

  - by Kaz

  Suppose I have created an account whose login shell is actually a script which does not permit an interactive login, and only allows a very limited, specific set of commands to be remotely executed. Nevertheless, ssh allows the user of this account to forward ports, which is a hole. Now, the twist is that I actually want that account to set up a specific port forwarding configuration when the ssh session is established. But it must be impossible configure arbitrary port forwarding. (It is an acceptable solution if the permitted port forwarding configuration is unconditionally established as part of the every session.)

  Read the article

< Previous Page | 110 111 112 113 114 115 116 117 118 119 120 121  | Next Page >