Search Results

Search found 4068 results on 163 pages for 'intel pentium4'.

Page 114/163 | < Previous Page | 110 111 112 113 114 115 116 117 118 119 120 121  | Next Page >

• Which Windows OS Supports 8 GB RAM in a Laptop and Suggestions for a Better Laptop for Personal & De

  - by Ellen

  I am about to purchase a laptop and have zeroed on the following two of them. Toshiba L500-ST2544 Toshiba L505-ES5034 The Common Specification for both of them are as follows - RAM - 4GB DDR3 Memory HDD - 320 GB Processor - Intel® Core™ i3-330M Processor WebCam and Mic - Available HDMI Port - Available Numeric Key Pad - Available Windows 7 (64 bit) Home Premium Now, the only difference between ST2544 and ES5034 is that, the ST2544 has a maximum of 2 slots with 2 GB in each. So, you can have a max of 4 GB RAM in that. The ES5034 can support 8 GB RAM, so, in a couple of years, if I want to add another 4 GB RAM I will be able to do it. The price for ST2544 is USD 629.00 whereas, the price for a ES5034 is USD685. A difference is USD 55.00 (not a major amount, but still something extra). Is it worthwhile going for the ES5034? Which Windows Operating System supports 8 GB of RAM?

  Read the article

• HP ML150 G6 upgrading RAM/CPU beyond specs?

  - by Morten Green Hermansen

  I am being told that some limits on some HP servers can be crossed. Do any of you have any experience with that? A ML150/G6 is limited to 48GB RAM but I have been talking to a German company that guaranties me that this server will be able to be upgraded to 384GB RAM (using 32GB memory modules and 2 CPUs) http://www.compuram.de/en/memory,HP+%28-Compaq%29,Server,Proliant,ML150+G6.htm Can this really be true? The server that I have is using E5504 CPUs but will I be able to upgrade to any CPU that is using a LGA1366 socket? All from a low wattage L5640 all the way to the 6 core, high wattage versions like an X5650? (If cooling and power is adequate ofcause). Is there any limitation with powerregulators and chipset (Intel 5500). I am looking forward to any reply. Thanks in advance and best regards, - Morten Green Hermansen, Fanitas

  Read the article

• Connect Lenovo Thinkpad Edge e120 to WQHD display (such as Dell U2711) through HDMI

  - by Fulvio

  On paper, the HDMI version of the Lenovo Thinkpad Edge e120 is 1.3, which supports WQHD. Does it actually work? I want to connect the e120 to a WQHD display, such as the Dell U2711 or an Apple Cinema Display. I run Windows 7 Ultimate and latest drivers. The e120 I think has the Intel HD Graphics 3000 onboard chipset. I don't have the chance to test out the e120 with neither of these displays, so I'm seeking for an opinion from those who have tried. Thank you

  Read the article

• Motherboard warning lights when plugging in a display port cord to graphics card?

  - by rllr

  Earlier today, my computer spontaneously shut itself off and refused to turn back on. I tested my PSU and it's operating fine. I unplugged everything and let it sit for a while and it started to make a high pitched coil whine/hiss. When I came back an hour later and plugged in only the power cord, it turned on without any issues. After some troubleshooting, I noticed my motherboard (Intel D975XBX2) has a red CPU led and VR led that come on whenever I plug my monitor into my graphics card via display port. DVI does not cause a similar issue. I was running three monitors off the card, so I need both DVI ports and the display port working. Is it likely my graphics card needs to be replaced, or should I be looking elsewhere to resolve this issue?

  Read the article

• PC shut downs automatically after a second

  - by emzero

  I have this not-so-old computer that's not being used for a year or so. Specs: Motherboard: ASUS PN5-E SLI CPU: Intel Core2Duo E4300 RAM:2x2GB SuperTalent DDR2-800 VGA: Zogis GeForce 7950GT PSU: Vitsuba San-55-S 550w HD: No hardrives yet When I power on the computer, everything seem to start, but right away the whole system shuts down. I've removed and changed the RAM sticks, take out the VGA, everything I could think of. So what could it be causing this? The PSU? The motherboard is dead? The CPU? Any help to isolate the problem will be useful. Thanks PS: Please don't close the question, this could be helpful to anybody having a similar problem, even with different hardware.

  Read the article

• Dell Latitude E6420 dual-boot Ubuntu + Windows 7 Optimus graphics problems

  - by Ryan

  I have a Dell Latitude E6420 laptop with Ubuntu 12.04 alongside Windows 7 (dual-boot) docked in a docking station with 2 DVI outputs. It took me a week of tinkering to get the dual external monitors to work in Ubuntu, and I had to disabled the "Optimus" feature in the BIOS. But now neither external monitor is detected in Windows, and the resolution is also very low. Do you know how I can successfully dual-boot Windows 7 and Ubuntu on this machine using my 2 external DVI monitors? I have an open question here too, trying to resolve this same issue: http://askubuntu.com/questions/146933/dock-with-dual-external-dvi-monitors-with-intel-nvidia-optimus

  Read the article

• Does CPIO produce platform dependant archives?

  - by TiCL

  I made a CPIO archive with following command on Solaris 11 (SPARC): find . | cpio -ov >/tmp/myarchive.cpio I copied it to Intel based Solaris 11 machine and tried to extract using the following command cpio -icvdu < myarchive.cpio It gives me following error: cpio: Not a cpio file, bad header. 1 errors The MD5SUM hash matches and I can extract it on another SPARC machine. My question, does CPIO produce platform dependant output? Is there any way to convert it? I cannot use TAR at this moment, because the directory I am archiving has long symbolic links that are skipped by TAR command

  Read the article

• ATI AMD Radeon 6670M 2GB Dual External monitors

  - by kellax

  I have HP Pavilion dv7 BeatsAudo model: dv7-6b with following specifications: CPU: Intel i7-2670QM ( Quad Core ) 8 CPU's @ 2.2Ghz RAM: 8GB @ 1066 GPU: ATI Radeon HD 6770M 1GB Notebook has two slots: HDMI and VGA On my VGA i have an external monitor 24" Samsung, any idea if my notebook could support a second external monitor as well. I do a lot of development work, i havent got a second monitor to test it yes but i know there can be problems. I would like to have a monitor connected on my VGA and on my HDMI so two external monitors and notebooks monitor. Would this be viable ?

  Read the article

• Calculating RAM Performance? Example: DDR3-2133 CL9-11-10-28 1.65V vs DDR3-1600 CL10-10-10-30 1.5V

  - by user1131467

  How do you calculate the relative performance of PC RAM? For example, what is the relative performance of the following: G.Skill Ripjaws Z 8 x 4GB Kit, DDR3-2133, [email protected] G.Skill Ripjaws Z 4 x 8GB Kit, DDR3-1600, [email protected] If it's relevant, when they are used in a top of the line ASUS Rampage IV Extreme motherboard and Intel i7 3960X? By performance, I mean relative: read latency write latency read bandwidth write bandwidth Please include working. (I mean how did you arrive at the figures based on timing and DDR3-speed)

  Read the article

• attach two hdds to a computer having 500W smps

  - by Gaurav Sharma

  I have a desktop system installed with a 250 GB hdd (seagate sata II) this system is having a power supply of 500W (not sure if it is 650W but not more than that) the power supply is a local brand. Will it be safe to attach a second 250 GB sata II hdd on the same system. Safe in the sense that the system may not fall short of power at any time. My system's config is as follows Core2Duo processor Mercury cabinet having an additional fan (small one) sata dvd writer 52X windows xp sp 2 ASUS motherboard (intel G965 express chipset) If the above specified power supply is not sufficient for above configuration of system then please suggest the appropriate power supply (including watts)

  Read the article

• Unable to diagnose Windows 7 lockup

  - by Delyan

  Basic info: Laptop Dell Studio XPS 13 (Intel P9600, 4GB RAM, NVidia 9400M card, 256G Samsung PM800 SSD) Windows 7 Ultimate, as well as Fedora 14 Here's the deal - Windows would just lock up out of nowhere, no log entries, no dumps, no BSOD, it just freezes. This happens mostly when idle (but it happened when I was using it too) and does not follow a concrete time frame. No input is accepted - only solution is to hold the power button. Although this sounds like a clean cut hardware issue, the reason I'm willing to rule this out is that my primary OS is Fedora 14. It's been working fine for the past 2 years and I've been stress testing the hardware (intentionally or not) every once in a while with no issues. I would like to ask if there's any way to get a diagnostic output from Windows in a situation such as this. The next step in my testing is to leave it in Safe Mode overnight and see if it locks up but even if I do that, I still need to figure out what component freezes it up during normal operation.

  Read the article

• Not able to connect to internet in RHEL 5

  - by chankey007

  I just installed red hat enterprise 5 in my laptop and on desktop both. In desktop it is working fine but in laptop it is not showing the eth device. (I tried ifconfig only lo is there). I tried ifup eth0 still nothing happened. The network service in /etc/sysconfig/network-scripts/ifcfg-eth0 and in /etc/sysconfig/network are enable. I had ubuntu in my laptop before and I faced same problem with that too. Is there any problem with my laptop? I have my system on dual boot and in win7 networking is running fine. I am not able to connect to the internet only, other devices are working fine. System conf: Sony vaio E series. 3 GB RAM, intel core i3 2.13 GHZ.

  Read the article

• Not able to connect to internet in RHEL 5

  - by chankey007

  I just installed red hat enterprise 5 in my laptop and on desktop both. In desktop it is working fine but in laptop it is not showing the eth device. (I tried ifconfig only lo is there). I tried ifup eth0 still nothing happened. The network service in /etc/sysconfig/network-scripts/ifcfg-eth0 and in /etc/sysconfig/network are enable. I had ubuntu in my laptop before and I faced same problem with that too. Is there any problem with my laptop? I have my system on dual boot and in win7 networking is running fine. I am not able to connect to the internet only, other devices are working fine. System conf: Sony vaio E series. 3 GB RAM, intel core i3 2.13 GHZ.

  Read the article

• RAID--0 " TWO " DRIVES SSD ONLY Should I use on-board / Software RAID OR a RAID Card / Control

  - by Wes

  I am looking at going with a TWO Drive Only SSD RAID-0 Configuration And was wondering if I would get better performance / Speed from the Use of a RAID Controller / Card Verses just using the Software RAID on my Mother Board. I have herd conflicting reports , Again I only Plan on Running " 2 " SSD Drives in RAID-0 Config I have No- problem spending the extra money for a good controller but only if I am going to benifit performance wise , Otherwise if there is no notable Gain I will just use the Software RAID that my HP-180-T came with Intel- 3.33 GHZ , 6-Core , 12-GB of DDR-3. I have a huge External drive for All Storage and am not concerned about Data loss just looking for pure speed. And if a Controller will benifit my performance Wht type of card would one suggest?

  Read the article

• Snow Leopard Hangs at Login Window

  - by jessecurry

  I've had an issue for the past few months, but I rarely restart so it hasn't caused too much trouble. Basically, when I start up my Mac (iMac10,1 - 3.06GHz Intel Core 2 Duo, OS X 10.6.3) everything proceeds as usual until I reach the login window. The login window displays normally, but keyboard and mouse input seem to be ignored. This condition persists for around 5 minutes at which time everything goes back to normal. While the login window is frozen my second monitor appears entirely blue, the second monitor receives a background as soon as the login window becomes responsive. If I startup while holding SHIFT the problem still occurs, but the freeze is much shorter. Looking through my logs I see no activity during the time that the login window is frozen. I've attempted to repair disk permissions, and gone through every possible maintenance option in Cocktail.

  Read the article

• VMWare ESX installation on sata disk

  - by ilansch

  I have a PC with Gigabyte H77 motherboard with Intel I5-3550 CPU 8 GB RAM 1600MHz and a 500GB Harddisk (7200RPM) - WD Sata III disk I wish to install esx on it and run some virtual machines on it. not alot, something like 2-3 VMs. My hardisk is Sata, is it possible to install ESX Server on it ? I am not worried about loading issues. When i try loading the installation it writes it cannot detect my disk (since its not SCSI disk). How can i bypass this ? or find a solution. thanks

  Read the article

• Areca 1880ix RAID hangs

  - by Dave

  Areca RAID controller ARC-1880ix-12 (firmware 1.50) hangs when on high load. My setup is: Chenbro 3U chassis Intel S5500BC mainboard Xeon 5603 CPU 16GB of RAM 12 Seagate SAS drives ST32000645SS (2 of them as hot spare, 10 as RAID10) Mellanox Infiniband HBA card This server is working as external infiniband storage for Xen VMs. When load is quite big Areca's firmware hangs - it becomes unreachable even from Areca's ethernet adapter. After resetting the server power it returns to normal operation. While Areca is hanged I can confirm that it is powered (ethernet link is active) and Infiniband HBA works Ok. Thanks in advance for any idea or suggestion where the problem might be!

  Read the article

• new pc..noisy fan

  - by BRQ

  It's a new build, but it's always had noisy fans. From start to end, they will not stop running. The case is a cooler master which I believe comes with a fan that is not controlled by BIOS (according to technician), so that may be the source of the problem..but my lack of knowledge on the matter prevents me from making a reasonable assessment. Here are readings from CoreTemp: Model: Intel Core i7 870 (Lynnfield) Platform: LAG 1156 (Socket H) Frequency: 1658.23MHz (132.66 x 12.5) Tj. Max: 99 C Core #0: low= 34 C; high= 42 C; Load= 0% Core #1: low 31 C; high 42 C; load= 0% Core #3: 35 C; 42 C; 0% Any input will be appreciated.

  Read the article

• Processor upgrade on a laptop vs. Ram upgrade. Also does ram always matter?

  - by Evan

  I have a Dell Inspiron 14r (N4110) with an Intel Core i3 and 4gb of ram. It runs very smoothly, however gaming on this laptop is very limited. This is mostly because of integrated graphics but i have seen a computer with a Core i5, and very similar specs otherwise, run games that the N4110 cannot. This other computer has integrated graphics and 6gb of ram. I am wondering whether upgrading ram or upgrading the processor make the most difference in performance. Which setup would get better performance, an i5 with 4gb of ram or an i3 with 8 gb of ram? (Both with integrated graphics) Also, is there a certain point at which you have too much ram for the computer to ever possibly use? For instance is there really any difference in performance between 8 gb and 16 gb of ram?

  Read the article

• Sorting out mSSD acceleration on a Acer M3-581TG

  - by PhonicUK

  I recently purchased a Acer Timeline M3 Ultra, it ships with a 500GB HDD and a 20GB mSSD to use as a cache. First thing I did when I got it was format the drives and install a clean OS (on the HDD, the mSSD has nothing on it) - but now I can't figure out how everything needs to be configured in order to use the mSSD as a cache, it just looks like a standard storage drive. I've poked around in the BIOS and there is a SATA mode setting, but it only has one option (AHCI), most of the documentation I've seen on the subject says that the SATA controller needs to be in RAID mode otherwise 'Acceleration' isn't visible in the Intel SRT menu (which for me, it isn't) I've seen a few things that suggest I just need the correct partition layout, I tried this using fdisk from a Linux LiveCD but got nowhere. Any ideas? The laptop shipped with no recovery media so I'm marginally stumped. I don't have any issue with reformatting again if required.

  Read the article

• VMware + SQL Server - sqlserver.exe not using both CPU cores

  - by fistameeny

  Hi, I am working on a virtual machine that runs SQL Server Express (as part of Sage Line 50 Manufacturing). The details are as follows: Physical Server (host machine) - Intel Xeon Quad Core 2.1GHz - 4GB RAM - VMDK image stored on RAID-5 500GB SATA drives (7200RPM) - Running Ubuntu 10.04 Server 64 bit - VMware Server 2 Virtual Machine - Windows Small Business Server 2003 - Allocated 2 vCPU's and 2GB RAM - Using 100GB pre-allocated flat VMDK file The problem I have is that there is process that runs in SQL Server that is CPU intensive. On the old physical server that we migrated to the virtual machine from, this would utilise both CPU cores so the sqlserver.exe process would be running 100% on each of the CPU cores. On the virtual machine, it only seems to use one of the two CPU cores, meaning that the process is much slower to run. Question Is there a way to force SQL Server (sqlserver.exe process) to use both of the CPU cores, and distribute it's load between them? Is this a VMware setting that needs changing to allow processes to use both cores?

  Read the article

• Macbook superdrive got calibration problems

  - by Fractal

  I have an intel macbook dual 2Ghz, bought about three years ago. I've had some problems with the superdrive and changed it a year and a half ago. the drive is Matshita DVD-R UJ 857 now I'm into burning cd's again and try to burn a DVD with Toast Titanium from an .iso on my hard drive But it won't work. When I launch the burn, the disc suddenly stops turning, and an error log pops: medium error, sense code = 0x73, 0x03 then I try with the built in cd burner of the macbook as soon as I click burn, the cd stops turning in the drive, and error log says peripheral couldn't calibrate power of the laser required for medium so since I'm not that logical of a geek, I try my first idea: let's see with other brands of DVD! the problem is that it works, now. but I'd like for all of my medium to be usable, and I've already seen my ridata DVD being burn, so here's the question. What the hell is happening with my superdrive? :)

  Read the article

• Asus laptop not retaining Aero theme when unplugged

  - by expiredninja

  The problem i'm having occurs when i unplug my laptop, it disregards several elements of my theme. The taskbar becomes unlocked. My desktop background is turned white. The transparency on my windows goes away. I can fix these things by running the Aero trouble shooting utility, which mentions something about the color bit depth These are these specs for the computer: Asus Laptop / Intel® Pentium® Processor / 15.6" Display / 4GB Memory Model: X54H-BD3MA SKU: 4005394 I'm sure there are duplicates of this, just not sure whick one refers to me. Thank you. Also i think someone should add an "unplugged" tag.

  Read the article

• Why doesn't my computer work at full speed?

  - by kubilas

  My motherboard is a Gigabyte GA-8I915PL-G with an Intel Pentium 4 630 3,0 GHz which doesn't run at it's default speed. It's currently at FSB 800, CPU Host 200 and CPU 3000 MHz; but sometimes it runs at FSB 533, CPU Host 133 and CPU 2025 MHz. Sometimes it's even at FSB 75 and CPU 1128 MHz. When I configure the default settings in Easy Tune then my computer doesn't work. Sometimes I need to clear the CMOS so I can set the default settings in the BIOS, but that doesn't always help. I've updated the BIOS, what else can I do to fix this problem?

  Read the article

• Computer turns off and on after start ..then goes dead

  - by Shiki

  I built a new PC from the following components: - CPU: Intel Core i7 950 - MB: Gigabyte X58A-UD3R - RAM: 2x2gb i7 Corsair memory - VGA: Zotac AMP2 GTX260 - HDD: 1 GreenSATA HDD (Western Digital 500gb RE2) When I turn it on, it goes for a few seconds, fans at maximum speed, then turns off. The again, it starts by itself.. and goes with fans on max speed, nothing happens. First I suspected my PSU. It's a Chieftec 450AA PSU. After I borrowed a Chieftec 550AA PSU, I tried to start with that. Exact same story. Any idea ? Do I need a bigger PSU? Reason why its not localized. I never seen this turn on, off, on. If you give answer for that, it would already help people like me, with the same problem.

  Read the article

< Previous Page | 110 111 112 113 114 115 116 117 118 119 120 121  | Next Page >