Search Results

Search found 7706 results on 309 pages for 'checked'.

Page 115/309 | < Previous Page | 111 112 113 114 115 116 117 118 119 120 121 122  | Next Page >

  • Can't the NetworkManager applet to appear in the Gnome panel in Ubuntu

    - by Nate
    I have researched this problem extensively and I can't seem to find an answer. In Ubuntu 10.04 LTS, I want to connect to my VPN through the NetworkManager applet. I installed all the network manager packages, including the gnome client. I understand I need to add the "Notification Area" to the panel, which I have done. I checked that the NetworkManager is running: nate@nate-desktop:~$ service network-manager status network-manager start/running, process 763 In /etc/NetworkManager/nm-system-settings.conf, I have added managed=true (don't know if this matters, but I saw it suggested on one forum): nate@nate-desktop:~$ more /etc/NetworkManager/nm-system-settings.conf # This file is installed into /etc/NetworkManager, and is loaded by # NetworkManager by default. To override, specify: '--config file' # during NM startup. This can be done by appending to DAEMON_OPTS in # the file: # # /etc/default/NetworkManager # [main] plugins=ifupdown,keyfile [ifupdown] #managed=false managed=true At this point, it looks like NetworkManager is running but it's not appearing in the NotificationArea of the panel. I don't know what else to try. Any ideas?

    Read the article

  • Can't the NetworkManager applet to appear in the Gnome panel in Ubuntu

    - by Nate
    I have researched this problem extensively and I can't seem to find an answer. In Ubuntu 10.04 LTS, I want to connect to my VPN through the NetworkManager applet. I installed all the network manager packages, including the gnome client. I understand I need to add the "Notification Area" to the panel, which I have done. I checked that the NetworkManager is running: nate@nate-desktop:~$ service network-manager status network-manager start/running, process 763 In /etc/NetworkManager/nm-system-settings.conf, I have added managed=true (don't know if this matters, but I saw it suggested on one forum): nate@nate-desktop:~$ more /etc/NetworkManager/nm-system-settings.conf # This file is installed into /etc/NetworkManager, and is loaded by # NetworkManager by default. To override, specify: '--config file' # during NM startup. This can be done by appending to DAEMON_OPTS in # the file: # # /etc/default/NetworkManager # [main] plugins=ifupdown,keyfile [ifupdown] #managed=false managed=true At this point, it looks like NetworkManager is running but it's not appearing in the NotificationArea of the panel. I don't know what else to try. Any ideas?

    Read the article

  • PHP Connection Strings

    - by Campo
    I have setup mirroring on my MSSQL server it is an automatic fail over. Lets say the SQL server goes down. I have found connection strings to reconnect the site to the mirror database for MSSQL 2008 Data Source=myServerAddress;Failover Partner=myMirrorServerAddress;Initial Catalog=myDataBase;Integrated Security=True; OR Provider=SQLNCLI10;Data Source=myServerAddress;Failover Partner=myMirrorServerAddress;Initial Catalog=myDataBase;Integrated Security=True; OR Driver={SQL Server Native Client 10.0};Server=myServerAddress;Failover_Partner=myMirrorServerAddress;Database=myDataBase; Trusted_Connection=yes; Is there something similar I can use for PHP to do the same sort of thing. This way if only the database goes down the site instantly fails over to the mirror database as soon as it is online. Thoughts/Suggestions/Comments All appreciated. I checked connectionstring.com but did not find a section for PHP

    Read the article

  • What's constitute an entry on the IPTables and how to find out which client it is originated from

    - by cbd
    I have a Billion BiPac 7700N Modem/Router/Access Point and I connect another router (TP-Link TL-WR1043ND) in wan-bypass mode to extend the wireless coverage. Lately, I noticed that the connection through TP-Link has been dropping out quite regularly. Having read some posts on the Internet, I checked system log on 7700N and found that there are many "nf_conntract: expectation table full" errors, which I suppose the iptables are full. My questions: What does constitute an entry on the iptable? Is it a client or a connection (which means one client can have multiple connections) How could I find out where are those connections originated from? Note: Many reported that the issue is usually related to having torrents running but I don't have any torrents running. Thank you.

    Read the article

  • MySQLi Extension with phpMyAdmin

    - by user1062058
    I just unpacked the latest phpMyAdmin into /var/www/html/phpMyAdmin and it is giving me "The mysqli extension is missing." - how do I install this? I'm on Centos. I checked php.ini and it seems to be "unlocked". when I type in php -i |grep -i mysqli ... it looks to be enabled. Also this is PHP Version 5.3.8 php -m apc ctype curl date dom filter ftp gd hash iconv json libxml mcrypt memcache mysql mysqli openssl pcre PDO pdo_sqlite posix REflection session SimpleXML soap SPL SQLite standard tokenizer xml xmlreader xmlwriter zlib Thanks.

    Read the article

  • MySQL works with straight php, but not in phpMyAdmin or in Drupal

    - by Marek
    I just updated from PHP 5.1 to 5.2 and both drupal and phpMyAdmin stopped being able to save information. I've checked the mysql user permissions - they look ok. I wrote some simple php to insert a row into a table, and it works, but if I try to do the same thing in phpMyAdmin, it just says "no change". phpMyAdmin will delete rows, select rows, but not insert or update them. Drupal does the same thing - it will select info from the tables ok, but not insert or update (or delete). Any ideas? I'm really starting to get desperate! Cheers, Marek

    Read the article

  • What can cause SQL 2008 Transaction Log Shipping to stop functioning?

    - by Rick
    I read somewhere that doing a backup or when Maintenance Plan runs can cause Log Shipping to stop functioning. Is this true? What should we watch out for once our Transaction Log Shipping is in place that could stop it? A Log Shipping test we were doing between two databases on the same SQL 2008 server appeared to stop working without any error. When we checked the History of the LSRestore_* job it was always ignoring the new *.trn files. Any suggestions? Thanks.

    Read the article

  • ntpstat response fine but server time out of sync

    - by zedoo
    Hi, I found out that the ntpd service that I've set up a few weeks ago on a Centos5 machine doesn't correctly synchronize the server time. I detected an offset of more than 5 minutes (by stopping ntpd and executing ntpdate). After setting up the service I checked the setup via ntpstat: [xxxx@xxx ~]$ ntpstat -q synchronised to local net at stratum 11 time correct to within 10 ms polling server every 1024 s I repeated this check every day and it always showed this output. Doesn't this output tell me that the server time is sane?

    Read the article

  • How do I make exchange forward email to a non-exchange mail server (postfix on mac)?

    - by johnny
    Hi, I'm not sure what I'm doing. Exchange has been working a long time. I just installed a mac mail server postfix/dovecot. They both work but not together. If I send email directly to the new server with [email protected], I can send email to the Internet and I can receive email at the [email protected]. But, if I log onto my exchange account with OWA and I put in [email protected] I never receive it and I never get any errors back in OWA or on my mac server logs. It just disappears. On the mac, I thought that as long as I had mail running and had SMTP set to allow incoming email checked it would receive email from anywhere. How can I make my Exchange server send email to the mac box if the email doesn't exist in the exchange server? Is this where I would put a new SMTP connector and a bridgehead using DNS? Thank you for any help.

    Read the article

  • not able to mount media to ESX 4.0

    - by jack8138
    Hi, I have ESX 4.0 running on NEC Express 5800 R-120a model. I have 2 VMs running windows XP. I am not able to mount any media to it. When I try connecting the local media to the VM, the error message comes mentioning "a connection to the host could not be established.: I have checked and there is no network issue. ESX is accessible fine. Any help would be greatly appreciated. Besides, I have opened almost all the ports in the firewall just to make sure there is no port conflict.

    Read the article

  • ubuntu server slowly filling up

    - by Crash893
    We had our samba server (ubuntu 8.04 ltr) share fill up the other day but when I went to look at it I cant see any of the shares have to much on them we have 5 group shares and then each users has an individual share one users has 22gigs of stuff a few others have 10-20mb of stuff and everyone else is empty so maybe like 26gigs total I deleted a few files yesterday and freed up about 250mb of space today when i checked it it was completely full again and i deleted some older files and freed up about 170mb of stuff but i can watch it slowly creep down in free space. I keep running a df -h Filesystem 1K-blocks Used Available Use% Mounted on /dev/sda1 241690180 229340500 169200 100% / varrun 257632 260 257372 1% /var/run varlock 257632 0 257632 0% /var/lock udev 257632 72 257560 1% /dev devshm 257632 52 257580 1% /dev/shm lrm 257632 40000 217632 16% /lib/modules/2.6.24-28-generic /volatile what can I do to try to hunt down whats taking up so much of my hdd? (im fairly new to unix in general so i apologize if this is not well explained)

    Read the article

  • ubuntu server slowly filling up

    - by Crash893
    We had our samba server (ubuntu 8.04 ltr) share fill up the other day but when I went to look at it I cant see any of the shares have to much on them we have 5 group shares and then each users has an individual share one users has 22gigs of stuff a few others have 10-20mb of stuff and everyone else is empty so maybe like 26gigs total I deleted a few files yesterday and freed up about 250mb of space today when i checked it it was completely full again and i deleted some older files and freed up about 170mb of stuff but i can watch it slowly creep down in free space. I keep running a df -h Filesystem 1K-blocks Used Available Use% Mounted on /dev/sda1 241690180 229340500 169200 100% / varrun 257632 260 257372 1% /var/run varlock 257632 0 257632 0% /var/lock udev 257632 72 257560 1% /dev devshm 257632 52 257580 1% /dev/shm lrm 257632 40000 217632 16% /lib/modules/2.6.24-28-generic /volatile what can I do to try to hunt down whats taking up so much of my hdd? (im fairly new to unix in general so i apologize if this is not well explained)

    Read the article

  • How can i get more user debug logging related to kerberos for alfresco?

    - by Maarten
    I am running alfresco community edition 3.4c on a debian linux. I have problems getting the kerberos authentication in order. The biggest problem is that do not seem to have any sort of user logs. what i am using already: log4j.logger.org.alfresco.web.app.servlet.KerberosAuthenticationFilter=debug log4j.logger.org.alfresco.repo.webdav.auth.KerberosAuthenticationFilter=debug log4j.logger.org.alfresco.smb.protocol=debug log4j.logger.org.alfresco.fileserver=debug I've also checked if the users actually reach the server, and they do, (also on a linux firefox outside of domain, i seem to be able to log in). Can anyone help me get more user logging?

    Read the article

  • Can't access Administrator account on Windows XP after adding local user account

    - by bwerks
    I have an installation of windows XP, and it's not part of a domain. Previously, it just had only the administrator account, and upon creating a different user account, all access was lost to the administrator account. When the machine starts up, only the new local account is offered for login, which seemed strange. I've checked that the administrator account was not disabled, nor are any rights missing from the local security policy. Furthermore, the administrator account is accessible via remote desktop, where an opportunity is given to type the desired account. REALLY strange. Upon deletion of the new local user account, the administrator account appeared again. Can anyone tell me what's going on?

    Read the article

  • Server Performance

    - by Burt
    We have a dedicated server that we use to stage websites (our test server). The performance of the server has become really bad and we regularly have to restart it. When performance is poor I have checked task manager for the processes and memory but everything looks OK. We use a content management system and it is always when using the admin section of this CMS that we notice the performance degrade which makes me think it may have something to do with DB calls the CMS is making. Does this sound viable? Any other sggestions of how I can go about testing this? Thanks in advance...

    Read the article

  • Visual Studio 2005 Open Project Dialog Slow as Molasses

    - by futureelite7
    Hi, Whenever I try to open a project in Visual Studio 2005 (Windows XP), my open project dialog become slow as molasses - navigating down one level of folders typically takes almost 60 seconds. Finding the project and opening it can take up 4-5 minutes, which is just ridiculous. I've checked the open project dialogs of other programs - only VS2005 is acting this way. What could be causing this problem and how do I go about solving it (apart from reinstalling VS2005 / windows) (Edit: Even VS2008 on the same machine does not have this problem. I don't know what's wrong.) Thanks!

    Read the article

  • Change Win7 desktop background via Win2k3 Group Policy

    - by microchasm
    I'm experiencing some strange behavior: I have set the following policies: User Configuration\Administrative templates\Desktop\Active Desktop Enable active desktop [enabled] Active Desktop Wallpaper [set to local path -- quadruple checked; path is correct] Allow only bitmap wallpaper [disabled] gpupdate /force, log out, log back in, and the background is just black. If I go into themes, and select Windows 7, the appointed background then shows (it also flashes when logging out). gpresult I've tried: http://social.technet.microsoft.com/Forums/en/winserverGP/thread/a1ebfe81-421e-4630-8c1f-8068222ee533 http://support.microsoft.com/default.aspx?scid=kb;EN-US;977944 http://social.technet.microsoft.com/Forums/en/w7itproui/thread/5b9e513a-d504-451d-a121-b4f94893d96d and a few other things, but nothing seems to be working :/ Thanks for any help/tips/advice.

    Read the article

  • Drupal + Zen - not proper layout/no graphics

    - by Luma
    Hello, I installed Drupal (both using Fantastico, then started over from scratch) and Drupal works great except when I setup the Zen theme (following the instructions on the website and in the readme-first.txt) the theme does not show up properly. it has no graphics except for the tiny drupal logo way at the bottom. the rest is text. I have uploaded the theme to the /public_html/sites/all/themes folder and it does show up in themes in the administer section so I select enable and default. permissions on this folder are 755. any ideas? I checked the Drupal forums and someone is having the same problem but no one replied (this was in April) so I figured I would have a better shot on this awesome website. thanks. Luma

    Read the article

  • My Logitech G35 headphones aren't very loud on Linux (fedora 14) why?

    - by DarkMantis
    I have recently purchased a set of G35 headphones. They seem to be very loud when I use them on Windows, but when I try and use them on Fedora 14, they are very quiet and I can't seem to make them louder. I have obviously checked the sound settings in Gnome, and they are all up full. I have got ALSA-mixer installed but seems to make no difference. There doesn't seem to be any specific drivers for these headphones for Linux. Anyone know how to make them go a bit louder?

    Read the article

  • Why is IIS7 not compressing my static files?

    - by Peter Evjan
    I am trying to get IIS to compress jquery.js (and all other static files, but using jquery as the example here) on my localhost, but something goes wrong. The funny part is that when I look in my %SystemDrive%\inetpub\temp\IIS Temporary Compressed Files\MySiteName, I see the jquery.js file there, and its size is 24 KB. But in the browser, according to the Net tab on Firebug, the size is 69 kb. I've tried the following: - Checked that my browser accept compression. I found "Accept-Encoding gzip, deflate" in the request header via Firebug - Enabling Failed Request Tracing. Nothing turns up in the %SystemDrive%\inetpub\logs\FailedReqLogFiles folder after I do my request though.

    Read the article

  • Wireless internet connection connects but internet does not work (no packets received). Wired does.

    - by Rodney
    When I connect my PC via ethernet cable to my ADSL router it works fine. When I connect via Wireless it connects and the internet will work for a random amount of time and then stop working. It stays connected with a strong signal but no packets are received. My laptop/iphone are right next to it and wireless works fine. If I open the Wireless USB status, it says it is connected to my SSID with full strength (54 mps - I am 3 meteres away from my router) and the activty shows as Packets 594 SENT and 105 RECEIVED (this goes up VERY slowly) I have tried the following: Turned off anitvirus and firewall completely. Tested the wifi signal- I am writing this on my laptop which is next to my PC and also has full wifi strength. Tried a different wireless adapter - I dug out an old PCI wireless card - it does the exact same thing. Compared all wireless settings to my laptop. I can ping google.com and it replies (sometimes with packet loss) When I reboot the PC it will connect for a minute or two (random time) and then just stops again. I tried Firefox, IE etc. no joy I have updated all latest versions (Netgear WG111v2) and drivers Checked Event Log - nothing unusual Ping the router (and even connect as admin for the few minutes when the internet does work) Changed the MTU down to 1200 using DrTCP Checked Device Manager for conflicts - none. I ping the router from the PC (192.168.0.10 - 192.168.0.1) and it replies with 4 packets. BUT, on my router admin page (which I access via http on my laptop wirelessly) - if I ping 192.168.0.10 all packets timeout (pinging my laptop 192.168.0.12 works fine) My router admin page shows the leased IP address for 192.168.0.10 (ie it is definitely talking to the router initially) Now I am out of ideas - please help. I think it is an OS/Software issue as I have tried 2 different wireless adapaters (PCI and USB) with the same result but all other wireless devices work fine around mine). It's not the firewall. It is getting assigned an IP address correctly (my PC gets 192.168.0.10, my laptop is .12) It is assigned by DHCP. As soon as I plug in the ethernet cable it all works fine. Repairing the adapter sometimes helps but it will always stop working after a random time. The wireless adapter always shows as connected with Excellent signal but the internet does not work. I am running Windows XP SP3 and have tried a Netgear WG111v2 USB adapter. Thanks in advance! UPDATE: The internet seems to be working, it is just either sending packets too small or slow to work (some small pages load bits of them very slowly but then hang). XP seems to have a networking diagnostic app - here is the output: Last diagnostic run time: 08/30/10 08:16:38 IP Configuration Diagnostic Invalid IP address info Valid IP address detected: 192.168.0.10 IP Layer Diagnostic Corrupted IP routing table info The default route is valid info The loopback route is valid info The local host route is valid info The local subnet route is valid Invalid ARP cache entries action The ARP cache has been flushed Gateway Diagnostic Gateway info The following proxy configuration is being used by IE: Automatically Detect Settings:Disabled Automatic Configuration Script: Proxy Server: Proxy Bypass list: info This computer has the following default gateway entry(ies): 192.168.0.1 info This computer has the following IP address(es): 192.168.0.10 info The default gateway is in the same subnet as this computer info The default gateway entry is a valid unicast address info The default gateway address was resolved via ARP in 1 try(ies) info The default gateway was reached via ICMP Ping in 1 try(ies) info TCP port 80 on host 65.55.12.249 was successfully reached info The Internet host www.microsoft.com was successfully reached info The default gateway is OK DNS Client Diagnostic DNS - Not a home user scenario info Using Web Proxy: no info Resolving name ok for (www.microsoft.com): yes No DNS servers DNS failure HTTP, HTTPS, FTP Diagnostic HTTP, HTTPS, FTP connectivity info FTP (Passive): Successfully connected to ftp.microsoft.com. info HTTP: Successfully connected to www.microsoft.com. warn HTTPS: Error 12002 connecting to www.microsoft.com: The operation timed out warn HTTPS: Error 12002 connecting to www.passport.net: The operation timed out error Could not make an HTTPS connection. info Redirecting user to support call WinSock Diagnostic WinSock status info All base service provider entries are present in the Winsock catalog. info The Winsock Service provider chains are valid. info Provider entry MSAFD Tcpip [TCP/IP] passed the loopback communication test. info Provider entry MSAFD Tcpip [UDP/IP] passed the loopback communication test. info Provider entry RSVP UDP Service Provider passed the loopback communication test. info Provider entry RSVP TCP Service Provider passed the loopback communication test. info Connectivity is valid for all Winsock service providers. Wireless Diagnostic Wireless - Service disabled Wireless - User SSID action User input required: Specify network name or SSID Wireless - First time setup info The Wireless Network name (SSID) to which the user would like to connect = RodSof Wifi. Wireless - Radio off info Valid IP address detected: 192.168.0.10 Wireless - Out of range Wireless - Hardware issue Wireless - Novice user Wireless - Ad-hoc network Wireless - Less preferred Wireless - 802.1x enabled Wireless - Configuration mismatch Wireless - Low SNR Network Adapter Diagnostic Network location detection info Using home Internet connection Network adapter identification info Network connection: Name=Local Area Connection 2, Device=Realtek RTL8168C(P)/8111C(P) PCI-E Gigabit Ethernet NIC, MediaType=LAN, SubMediaType=LAN info Network connection: Name=Wireless USB, Device=NETGEAR WG111v2 54Mbps Wireless USB 2.0 Adapter, MediaType=LAN, SubMediaType=WIRELESS info Both Ethernet and Wireless connections available, prompting user for selection action User input required: Select network connection info Wireless connection selected Network adapter status info Network connection status: Connected HTTP, HTTPS, FTP Diagnostic HTTP, HTTPS, FTP connectivity info FTP (Active): Successfully connected to ftp.microsoft.com. warn HTTP: Error 12007 connecting to www.microsoft.com: The server name or address could not be resolved warn HTTP: Error 12002 connecting to www.hotmail.com: The operation timed out warn HTTPS: Error 12002 connecting to www.passport.net: The operation timed out warn HTTPS: Error 12002 connecting to www.microsoft.com: The operation timed out error Could not make an HTTP connection. error Could not make an HTTPS connection.

    Read the article

  • vSphere ESX 5.5 hosts cannot connect to NFS Server

    - by Gerald
    Summary: My problem is I cannot use the QNAP NFS Server as an NFS datastore from my ESX hosts despite the hosts being able to ping it. I'm utilising a vDS with LACP uplinks for all my network traffic (including NFS) and a subnet for each vmkernel adapter. Setup: I'm evaluating vSphere and I've got two vSphere ESX 5.5 hosts (node1 and node2) and each one has 4x NICs. I've teamed them all up using LACP/802.3ad with my switch and then created a distributed switch between the two hosts with each host's LAG as the uplink. All my networking is going through the distributed switch, ideally, I want to take advantage of DRS and the redundancy. I have a domain controller VM ("Central") and vCenter VM ("vCenter") running on node1 (using node1's local datastore) with both hosts attached to the vCenter instance. Both hosts are in a vCenter datacenter and a cluster with HA and DRS currently disabled. I have a QNAP TS-669 Pro (Version 4.0.3) (TS-x69 series is on VMware Storage HCL) which I want to use as the NFS server for my NFS datastore, it has 2x NICs teamed together using 802.3ad with my switch. vmkernel.log: The error from the host's vmkernel.log is not very useful: NFS: 157: Command: (mount) Server: (10.1.2.100) IP: (10.1.2.100) Path: (/VM) Label (datastoreNAS) Options: (None) cpu9:67402)StorageApdHandler: 698: APD Handle 509bc29f-13556457 Created with lock[StorageApd0x411121] cpu10:67402)StorageApdHandler: 745: Freeing APD Handle [509bc29f-13556457] cpu10:67402)StorageApdHandler: 808: APD Handle freed! cpu10:67402)NFS: 168: NFS mount 10.1.2.100:/VM failed: Unable to connect to NFS server. Network Setup: Here is my distributed switch setup (JPG). Here are my networks. 10.1.1.0/24 VM Management (VLAN 11) 10.1.2.0/24 Storage Network (NFS, VLAN 12) 10.1.3.0/24 VM vMotion (VLAN 13) 10.1.4.0/24 VM Fault Tolerance (VLAN 14) 10.2.0.0/24 VM's Network (VLAN 20) vSphere addresses 10.1.1.1 node1 Management 10.1.1.2 node2 Management 10.1.2.1 node1 vmkernel (For NFS) 10.1.2.2 node2 vmkernel (For NFS) etc. Other addresses 10.1.2.100 QNAP TS-669 (NFS Server) 10.2.0.1 Domain Controller (VM on node1) 10.2.0.2 vCenter (VM on node1) I'm using a Cisco SRW2024P Layer-2 switch (Jumboframes enabled) with the following setup: LACP LAG1 for node1 (Ports 1 through 4) setup as VLAN trunk for VLANs 11-14,20 LACP LAG2 for my router (Ports 5 through 8) setup as VLAN trunk for VLANs 11-14,20 LACP LAG3 for node2 (Ports 9 through 12) setup as VLAN trunk for VLANs 11-14,20 LACP LAG4 for the QNAP (Ports 23 and 24) setup to accept untagged traffic into VLAN 12 Each subnet is routable to another, although, connections to the NFS server from vmk1 shouldn't need it. All other traffic (vSphere Web Client, RDP etc.) goes through this setup fine. I tested the QNAP NFS server beforehand using ESX host VMs atop of a VMware Workstation setup with a dedicated physical NIC and it had no problems. The ACL on the NFS Server share is permissive and allows all subnet ranges full access to the share. I can ping the QNAP from node1 vmk1, the adapter that should be used to NFS: ~ # vmkping -I vmk1 10.1.2.100 PING 10.1.2.100 (10.1.2.100): 56 data bytes 64 bytes from 10.1.2.100: icmp_seq=0 ttl=64 time=0.371 ms 64 bytes from 10.1.2.100: icmp_seq=1 ttl=64 time=0.161 ms 64 bytes from 10.1.2.100: icmp_seq=2 ttl=64 time=0.241 ms Netcat does not throw an error: ~ # nc -z 10.1.2.100 2049 Connection to 10.1.2.100 2049 port [tcp/nfs] succeeded! The routing table of node1: ~ # esxcfg-route -l VMkernel Routes: Network Netmask Gateway Interface 10.1.1.0 255.255.255.0 Local Subnet vmk0 10.1.2.0 255.255.255.0 Local Subnet vmk1 10.1.3.0 255.255.255.0 Local Subnet vmk2 10.1.4.0 255.255.255.0 Local Subnet vmk3 default 0.0.0.0 10.1.1.254 vmk0 VM Kernel NIC info ~ # esxcfg-vmknic -l Interface Port Group/DVPort IP Family IP Address Netmask Broadcast MAC Address MTU TSO MSS Enabled Type vmk0 133 IPv4 10.1.1.1 255.255.255.0 10.1.1.255 00:50:56:66:8e:5f 1500 65535 true STATIC vmk0 133 IPv6 fe80::250:56ff:fe66:8e5f 64 00:50:56:66:8e:5f 1500 65535 true STATIC, PREFERRED vmk1 164 IPv4 10.1.2.1 255.255.255.0 10.1.2.255 00:50:56:68:f5:1f 1500 65535 true STATIC vmk1 164 IPv6 fe80::250:56ff:fe68:f51f 64 00:50:56:68:f5:1f 1500 65535 true STATIC, PREFERRED vmk2 196 IPv4 10.1.3.1 255.255.255.0 10.1.3.255 00:50:56:66:18:95 1500 65535 true STATIC vmk2 196 IPv6 fe80::250:56ff:fe66:1895 64 00:50:56:66:18:95 1500 65535 true STATIC, PREFERRED vmk3 228 IPv4 10.1.4.1 255.255.255.0 10.1.4.255 00:50:56:72:e6:ca 1500 65535 true STATIC vmk3 228 IPv6 fe80::250:56ff:fe72:e6ca 64 00:50:56:72:e6:ca 1500 65535 true STATIC, PREFERRED Things I've tried/checked: I'm not using DNS names to connect to the NFS server. Checked MTU. Set to 9000 for vmk1, dvSwitch and Cisco switch and QNAP. Moved QNAP onto VLAN 11 (VM Management, vmk0) and gave it an appropriate address, still had same issue. Changed back afterwards of course. Tried initiating the connection of NAS datastore from vSphere Client (Connected to vCenter or directly to host), vSphere Web Client and the host's ESX Shell. All resulted in the same problem. Tried a path name of "VM", "/VM" and "/share/VM" despite not even having a connection to server. I plugged in a linux system (10.1.2.123) into a switch port configured for VLAN 12 and tried mounting the NFS share 10.1.2.100:/VM, it worked successfully and I had read-write access to it I tried disabling the firewall on the ESX host esxcli network firewall set --enabled false I'm out of ideas on what to try next. The things I'm doing differently from my VMware Workstation setup is the use of LACP with a physical switch and a virtual distributed switch between the two hosts. I'm guessing the vDS is probably the source of my troubles but I don't know how to fix this problem without eliminating it.

    Read the article

  • mdadm raid5 recover double disk failure - with a twist (drive order)

    - by Peter Bos
    Let me acknowledge first off that I have made mistakes, and that I have a backup for most but not all of the data on this RAID. I still have hope of recovering the rest of the data. I don't have the kind of money to take the drives to a recovery expert company. Mistake #0, not having a 100% backup. I know. I have a mdadm RAID5 system of 4x3TB. Drives /dev/sd[b-e], all with one partition /dev/sd[b-e]1. I'm aware that RAID5 on very large drives is risky, yet I did it anyway. Recent events The RAID become degraded after a two drive failure. One drive [/dev/sdc] is really gone, the other [/dev/sde] came back up after a power cycle, but was not automatically re-added to the RAID. So I was left with a 4 device RAID with only 2 active drives [/dev/sdb and /dev/sdd]. Mistake #1, not using dd copies of the drives for restoring the RAID. I did not have the drives or the time. Mistake #2, not making a backup of the superblock and mdadm -E of the remaining drives. Recovery attempt I reassembled the RAID in degraded mode with mdadm --assemble --force /dev/md0, using /dev/sd[bde]1. I could then access my data. I replaced /dev/sdc with a spare; empty; identical drive. I removed the old /dev/sdc1 from the RAID mdadm --fail /dev/md0 /dev/sdc1 Mistake #3, not doing this before replacing the drive I then partitioned the new /dev/sdc and added it to the RAID. mdadm --add /dev/md0 /dev/sdc1 It then began to restore the RAID. ETA 300 mins. I followed the process via /proc/mdstat to 2% and then went to do other stuff. Checking the result Several hours (but less then 300 mins) later, I checked the process. It had stopped due to a read error on /dev/sde1. Here is where the trouble really starts I then removed /dev/sde1 from the RAID and re-added it. I can't remember why I did this; it was late. mdadm --manage /dev/md0 --remove /dev/sde1 mdadm --manage /dev/md0 --add /dev/sde1 However, /dev/sde1 was now marked as spare. So I decided to recreate the whole array using --assume-clean using what I thought was the right order, and with /dev/sdc1 missing. mdadm --create /dev/md0 --assume-clean -l5 -n4 /dev/sdb1 missing /dev/sdd1 /dev/sde1 That worked, but the filesystem was not recognized while trying to mount. (It should have been EXT4). Device order I then checked a recent backup I had of /proc/mdstat, and I found the drive order. md0 : active raid5 sdb1[0] sde1[4] sdd1[2] sdc1[1] 8790402048 blocks super 1.2 level 5, 512k chunk, algorithm 2 [4/4] [UUUU] I then remembered this RAID had suffered a drive loss about a year ago, and recovered from it by replacing the faulty drive with a spare one. That may have scrambled the device order a bit...so there was no drive [3] but only [0],[1],[2], and [4]. I tried to find the drive order with the Permute_array script: https://raid.wiki.kernel.org/index.php/Permute_array.pl but that did not find the right order. Questions I now have two main questions: I screwed up all the superblocks on the drives, but only gave: mdadm --create --assume-clean commands (so I should not have overwritten the data itself on /dev/sd[bde]1. Am I right that in theory the RAID can be restored [assuming for a moment that /dev/sde1 is ok] if I just find the right device order? Is it important that /dev/sde1 be given the device number [4] in the RAID? When I create it with mdadm --create /dev/md0 --assume-clean -l5 -n4 \ /dev/sdb1 missing /dev/sdd1 /dev/sde1 it is assigned the number [3]. I wonder if that is relevant to the calculation of the parity blocks. If it turns out to be important, how can I recreate the array with /dev/sdb1[0] missing[1] /dev/sdd1[2] /dev/sde1[4]? If I could get that to work I could start it in degraded mode and add the new drive /dev/sdc1 and let it resync again. It's OK if you would like to point out to me that this may not have been the best course of action, but you'll find that I realized this. It would be great if anyone has any suggestions.

    Read the article

  • Microsoft SQL Server 2005 Express Edition SP4 wasn't installed

    - by user754334
    I lost track of my account when my question was moved to superuser. I wasn't able to install Microsoft SQL Server 2005 Express Edition SP4 through automatic update so I downloaded the update from here and tried manual install, which was also failed with some error: The components that you are trying to install are already installed I checked the product version of sql server 2005 which returned 9.00.5000.00 through command Select @@version. Now the question is, if the automatic update wasn't able to apply the SP4 patch then how come the version is updated to 9.00.5000.00 ? There is no way to rollback or reinstall the patch as it takes the entire SQL Server which came with Visual Studio 2005 to be re-installed. Is there any other way I can verify that SP4 patch was properly applied? Edit: I used MBSA Tool to analyze the required updates which confirms that the Microsoft SQL Server 2005 Express Edition SP4 is missing.

    Read the article

  • new cacti installation on ubuntu 12.04 64bit not graphing any data

    - by Dani Cela
    Hey guys i just installed cacti on a ubuntu 12.04 server and am having issues with any data showing up on my graphs. If i snmpwalk the certain OID it works. I have tailing on the cacti.log file and i see it polling the values correctly but nothing ever graphs. Is there anything i can check with regards to snmp or something in cacti that may be causing this to not work? I have already checked in my php.ini and have set the timezone, someone was mentioning that may cause issues.

    Read the article

< Previous Page | 111 112 113 114 115 116 117 118 119 120 121 122  | Next Page >