Search Results

Search found 4105 results on 165 pages for 'intel itanium'.

Page 115/165 | < Previous Page | 111 112 113 114 115 116 117 118 119 120 121 122  | Next Page >

• Processor upgrade on a laptop vs. Ram upgrade. Also does ram always matter?

  - by Evan

  I have a Dell Inspiron 14r (N4110) with an Intel Core i3 and 4gb of ram. It runs very smoothly, however gaming on this laptop is very limited. This is mostly because of integrated graphics but i have seen a computer with a Core i5, and very similar specs otherwise, run games that the N4110 cannot. This other computer has integrated graphics and 6gb of ram. I am wondering whether upgrading ram or upgrading the processor make the most difference in performance. Which setup would get better performance, an i5 with 4gb of ram or an i3 with 8 gb of ram? (Both with integrated graphics) Also, is there a certain point at which you have too much ram for the computer to ever possibly use? For instance is there really any difference in performance between 8 gb and 16 gb of ram?

  Read the article

• How can I disable DPMS temporarily in X under a modern linux?

  - by wrt

  Historically if you wanted to control blanking and DPMS in X, you could do it with xset. Issuingxset -dpms on my laptop results in xset q returning "DPMS is Disabled", as it should. But my screens still turn off. I'm running an up-to-date Arch Linux using KMS with integrated Intel graphics, I'm not running GNOME or willing to use anything that needs something like it. I am however stuck with DBUS and HAL. I've tried fiddling with the various timeouts, and it hasn't helped - specifically, changing the timeouts seems to be able to turn off the screen sooner, but not stop it from turning off :) This makes me suspect that there's something else overriding the setting. Is there any way to get xset to actually function as it used to, or at least stop lying to me? Note that I don't want to permanently disable DPMS or blanking - just to be able to control it when I need to.

  Read the article

• Too many processes?

  - by Mophily

  VMware Fusion v3.0.1 One vm for Windows XP, converted and recently expanded the disk size. Mac OS X 10.5.8, 2 x 3 GHz dual-core intel xeon machine. Immediately after booting, and before VMware Fusion is launched, the Activity Monitor shows eight processes associated with "vm". What caught my eye is the duplicates: netifup and dhcpd. I noticed this while trying to re-establish network connectivity after the upgrade to 3.0.1. I am not sure when the network connection was clobbered, so I cannot say it happend during the upgrade. Is eight processes typcial? I expect about six, as listed in other notes and documents on the web site. Could this be related to the failure to connect to the network?

  Read the article

• Creating a custom NAS compatible with the Mac Time machine and for media streaming

  - by Bobby Alexander

  I am planning to assemble a custom NAS machine using an Intel Atom processor. I need the NAS for the following purposes: It should be accessible from by Windows PC so that I can dump data on the NAS (installations, media etc) It should be accessible from my Macbook for the above use. I should be able to use it with the Mac time machine software for backup. The media should be available to my PS3 for streaming. I should be able to access it from my iphone. All the above features should be available over wireless. The time machine feature is very important. Is this even possible? Can someone provide resources on how I can assemble such a machine and setup the required software on it? Much appreciated.

  Read the article

• HP ML150 G6 upgrading RAM/CPU beyond specs?

  - by Morten Green Hermansen

  I am being told that some limits on some HP servers can be crossed. Do any of you have any experience with that? A ML150/G6 is limited to 48GB RAM but I have been talking to a German company that guaranties me that this server will be able to be upgraded to 384GB RAM (using 32GB memory modules and 2 CPUs) http://www.compuram.de/en/memory,HP+%28-Compaq%29,Server,Proliant,ML150+G6.htm Can this really be true? The server that I have is using E5504 CPUs but will I be able to upgrade to any CPU that is using a LGA1366 socket? All from a low wattage L5640 all the way to the 6 core, high wattage versions like an X5650? (If cooling and power is adequate ofcause). Is there any limitation with powerregulators and chipset (Intel 5500). I am looking forward to any reply. Thanks in advance and best regards, - Morten Green Hermansen, Fanitas

  Read the article

• Motherboard warning lights when plugging in a display port cord to graphics card?

  - by rllr

  Earlier today, my computer spontaneously shut itself off and refused to turn back on. I tested my PSU and it's operating fine. I unplugged everything and let it sit for a while and it started to make a high pitched coil whine/hiss. When I came back an hour later and plugged in only the power cord, it turned on without any issues. After some troubleshooting, I noticed my motherboard (Intel D975XBX2) has a red CPU led and VR led that come on whenever I plug my monitor into my graphics card via display port. DVI does not cause a similar issue. I was running three monitors off the card, so I need both DVI ports and the display port working. Is it likely my graphics card needs to be replaced, or should I be looking elsewhere to resolve this issue?

  Read the article

• Can there be multiple monitors with these video cards and setup

  - by z_Zelman

  I have a Acer Aspire TimelineX 4830TG-6808 laptop running windows 7 Ultimate with one VGA port and one HDMI port. It has one Intel HD Graphics family card and one NVIDIA GeForce GT 540M. Right now I have one monitor running via the VGA port, and also the basic laptop monitor. When I look at the monitor setup, I see one unused video card available. Can I have another monitor via the HDMI port? If I cannot run three monitors, is there some way I could make a large "single" desktop that extends over two monitors? For the sake of celerity, maybe something like having a virtual machine window that extends over two monitors. Could this maybe come from third party software?

  Read the article

• HDD situation - what would be best - data and backup

  - by Sam Johnson

  I just installed W8 on an Intel 330 180 GB SSD. I have 3 1TB HDDs. 1 HDD will be external for backup. 2 HDDs are then available for my PC. I do not need 2 TB of storage, so I thought I'd set these up to be exact clones of one another, so that if one dies I have a backup in the computer to go along with my external. Is this a good set up? How best would this be accomplished? I've heard people suggest RAID but I've never done RAID, have no idea what it is, and have no idea how to set it up in my BIOS. Thanks in advance

  Read the article

• Virtualbox and getting the Locked VT-x Error when trying to use more than 1 processor on the session

  - by Dave

  I have installed the latest version of virtualbox onto my Hewlett Pakard (h8-1170uk) I have a intel i7 2600 cpu and 8 gb of ram I can get virtual box to create several sessions of different operating systems at the same time, but whenever i try to get 1 session to open up using more than 1 processor option select ( i wanted one of my session access to 2 processors ) i keep getting this error message VT-x features locked or unavailable in MSR. (VERR_VMX_MSR_LOCKED_OR_DISABLED). Result Code: E_FAIL (0x80004005) Component: Console Interface: IConsole {1968b7d3-e3bf-4ceb-99e0-cb7c913317bb} I have search many times and cannot find a option to correct this. I have check my BIOS and there are no options about VT-x or Virtualisation or anything. Am i doing something wrong ? Why does Virtualbox run fine when just using the 1 processor option ?

  Read the article

• Why does my wifi fail to stay connected?

  - by Mark0978

  We have 5 different laptops in the house, 1 macbook, 1 Compaq, 3 dells, plus numerous little devices like ipods, squeezeboxs, squeezebox radios and controllers, you name it. All of them connect to and stay connected to the "downstairs" WIFI just fine. But my laptop (the most expensive of the lot) refuses to stay connected, preferring the much weaker and slower signal upstairs. My laptop is running Win7 (64 bit) Ultimate with an Intel 3945ABG WIFI contoller (It's a Dell Precision M6300). The WIFI Access Point is a Cisco WRT54G2 V1 with firmware: Firmware: DD-WRT v24-sp2 (10/10/09) micro Time: 11:11:10 up 42 min, load average: 0.06, 0.01, 0.00 WAN: Disabled

  Read the article

• Concerns about a Dedicated (Windows Server 2008) + DDoS

  - by TheKillerDev

  I am have today a dedicated server with these specs: Intel Core i5 750, 2x120GB (ssd + raid), Windows Server 2008 Web, 200Mbps Network, 24 Gb DD3 And I would like to know what are the best thing I can do to prevent a DDoS Attack, since I know this will be a real threat by the importance of the files that will be archived in it. Today I have apache listening port 80 and RDC listening port 3389. But the security is beeing made only by Windows Firewall. So, any thoughts on what would be good to prevent from DDoS attacks?

  Read the article

• Trouble with external monitor under Windows 7 on MacBook Pro Boot Camp

  - by Colm

  I'm running Windows 7 32-bit on a mid-2010 15" MacBook Pro Intel Core i5 under Boot Camp. I've had trouble getting it to work with my second display and searching Google for an appropriate answer has failed me. I'm on the latest version of Boot Camp - 3.2 - and have updated the drivers for the NVIDIA GeForce GT 330M. The monitor is connected via a VGA cable, and is a Dell ST2410. The monitor is recognised by Windows, which knows it's a Dell and its resolution. The desktop should be extended onto the second monitor - however nothing is showing. It remains black, though it doesn't show a lack of signal coming through which I would have expected. Any ideas what's wrong?

  Read the article

• Gentoo on Mac Mini - can't get framebuffer to work

  - by user42055

  I have the last Gentoo on an intel mac mini with 945G graphics. I'm trying to start X (with no config) but it complains that /dev/fb0 doesn't exist. I've tried adding the following options to the kernel boot params: video=intelfb:mode=800x600-32@60,accel,hwcursor vga=761 Because I read that the fb might not be enabled unless you set a vga= option. Unfortunately the kernel doesn't recognise that option. If I changed it to vga=ask it presents me a list of about 6 text modes no greater than 80x60. In the kernel I have agpgart, drm (using i830 module) and vga text console compiled in. What am I not doing right ?

  Read the article

• Gentoo on Mac Mini - can't get framebuffer to work

  - by user42055

  I have the latest Gentoo on an intel mac mini with 945G graphics. I'm trying to start X (with no config) but it complains that /dev/fb0 doesn't exist. I've tried adding the following options to the kernel boot params: video=intelfb:mode=800x600-32@60,accel,hwcursor vga=761 Because I read that the fb might not be enabled unless you set a vga= option. Unfortunately the kernel doesn't recognise that option. If I changed it to vga=ask it presents me a list of about 6 text modes no greater than 80x60. In the kernel I have agpgart, drm (using i830 module) and vga text console compiled in. What am I not doing right ?

  Read the article

• VGA no signal on LCD monitor attached to laptop

  - by Paul

  I bought a new Asus vh242h LCD monitor for use with my lenevo T60 laptop running XP professional. Display info under control panel says "Intel(R) 945GM Express Chipset Family". I am connecting via VGA. When I connect the monitor I get "VGA no signal" and the monitor screen stays blank. I have selected the monitor as the display device on the laptop. The information on the monitor displays the correct screen resolution from the laptop, so the monitor is communicating in some way with the laptop. I've successfully tried the monitor with my Dell inspirion 1525 running Windows Vista. I've change the VGA cable to one I know works. Tried different resolutions. I cannot find and specific drivers on the internet for this monitor, so I assume it should work with Plug and Play. Does anyone know what the problem could be?

  Read the article

• CentOS default installation gave 60% disk space to tmpfs partition

  - by garconcn

  I installed a CentOS server which will be used for xen hypervisor. The server has two Intel(R) Xeon(R) CPU E5620 and 148G memory. The OS was installed on a 120G SSD drive. After the installation, I found that the tmpfs partition occupied about 60% of the drive. Even though I don't need much space for the OS, will there be any problem with 71G tmp partition? Thanks for any comment. [root@cloud ~]# df -h Filesystem Size Used Avail Use% Mounted on /dev/mapper/VolGroup00-LogVol00 55G 1.1G 51G 3% / /dev/sda1 99M 13M 82M 14% /boot tmpfs 71G 0 71G 0% /dev/shm

  Read the article

• Artefacts during HDV capture

  - by Jakub Konecki

  When I try to capture HDV video stream from a Canon HV20 camera to a Dell Studio 1558 (Intel i7 720qm) laptop running Win 7 Home Premium x64, the image appears with a very annoying noise - it contains block artefacts. Something is wrong with the Fire Wire controller (Ricoh 1304 OHCI host controller, build-in). Tried changing the driver to legacy one to no avail. This does not happen with DV stream. I'm using a Belkin cable. The capture works OK on another machine.

  Read the article

• Sorting out mSSD acceleration on a Acer M3-581TG

  - by PhonicUK

  I recently purchased a Acer Timeline M3 Ultra, it ships with a 500GB HDD and a 20GB mSSD to use as a cache. First thing I did when I got it was format the drives and install a clean OS (on the HDD, the mSSD has nothing on it) - but now I can't figure out how everything needs to be configured in order to use the mSSD as a cache, it just looks like a standard storage drive. I've poked around in the BIOS and there is a SATA mode setting, but it only has one option (AHCI), most of the documentation I've seen on the subject says that the SATA controller needs to be in RAID mode otherwise 'Acceleration' isn't visible in the Intel SRT menu (which for me, it isn't) I've seen a few things that suggest I just need the correct partition layout, I tried this using fdisk from a Linux LiveCD but got nowhere. Any ideas? The laptop shipped with no recovery media so I'm marginally stumped. I don't have any issue with reformatting again if required.

  Read the article

• Snow Leopard Hangs at Login Window

  - by jessecurry

  I've had an issue for the past few months, but I rarely restart so it hasn't caused too much trouble. Basically, when I start up my Mac (iMac10,1 - 3.06GHz Intel Core 2 Duo, OS X 10.6.3) everything proceeds as usual until I reach the login window. The login window displays normally, but keyboard and mouse input seem to be ignored. This condition persists for around 5 minutes at which time everything goes back to normal. While the login window is frozen my second monitor appears entirely blue, the second monitor receives a background as soon as the login window becomes responsive. If I startup while holding SHIFT the problem still occurs, but the freeze is much shorter. Looking through my logs I see no activity during the time that the login window is frozen. I've attempted to repair disk permissions, and gone through every possible maintenance option in Cocktail.

  Read the article

• Why does 1GBit card have output limited to 80 MiB ?

  - by Gallus

  I'm trying to utilize maximal bandwidth provided by my 1GiB network card, but it's always limited to 80MiB (real megabytes). What can be the reason? Card description (lshw output): description: Ethernet interface product: DGE-530T Gigabit Ethernet Adapter (rev 11) vendor: D-Link System Inc physical id: 0 bus info: pci@0000:03:00.0 logical name: eth1 version: 11 serial: 00:22:b0:68:70:41 size: 1GB/s capacity: 1GB/s width: 32 bits clock: 66MHz capabilities: pm vpd bus_master cap_list rom ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation The card is placed in following PCI slot: *-pci:2 description: PCI bridge product: 82801 PCI Bridge vendor: Intel Corporation physical id: 1e bus info: pci@0000:00:1e.0 version: 92 width: 32 bits clock: 33MHz capabilities: pci subtractive_decode bus_master cap_list The PCI isn't any PCI Express right? It's a legacy PCI slot? So maybe this is the reason? OS is a linux.

  Read the article

• Does CPIO produce platform dependant archives?

  - by TiCL

  I made a CPIO archive with following command on Solaris 11 (SPARC): find . | cpio -ov >/tmp/myarchive.cpio I copied it to Intel based Solaris 11 machine and tried to extract using the following command cpio -icvdu < myarchive.cpio It gives me following error: cpio: Not a cpio file, bad header. 1 errors The MD5SUM hash matches and I can extract it on another SPARC machine. My question, does CPIO produce platform dependant output? Is there any way to convert it? I cannot use TAR at this moment, because the directory I am archiving has long symbolic links that are skipped by TAR command

  Read the article

• windows hosted networok on windows 8

  - by tanmaysingh

  my sister is using Acer laptop, that has an intel WLAN card and supports windows hosted network(checked in command prompt).Am using the basic way using netsh wlan command also, then am using netsh start wlan command.The hosted network gets created and it could b seen in "Network and Sharing Center" as the . I also went to Device manager, selected WLan card, made sure"allow this device to wake computer from sleep" is selected. Now I went to the newly created , clicked properties, and under sharing enabled allow this to be shared(but I am not able to select The name of the wifi my sis wants to share (in this case her college wifi name, LEts say QP4,Ethernet and Local Area connection are the only two option that are coming). Also the SSID name is not being shown in her mobile nor when I click the tower icon at the tray area,Any suggestions on what might be going wrong?She is using windows 8. Should I look for updated drivers? Her laptop is only 6 months old, i don't think the drivers are outdated. Any advice shall be appreciated.

  Read the article

• Connect Lenovo Thinkpad Edge e120 to WQHD display (such as Dell U2711) through HDMI

  - by Fulvio

  On paper, the HDMI version of the Lenovo Thinkpad Edge e120 is 1.3, which supports WQHD. Does it actually work? I want to connect the e120 to a WQHD display, such as the Dell U2711 or an Apple Cinema Display. I run Windows 7 Ultimate and latest drivers. The e120 I think has the Intel HD Graphics 3000 onboard chipset. I don't have the chance to test out the e120 with neither of these displays, so I'm seeking for an opinion from those who have tried. Thank you

  Read the article

• Time Machine (archive) of pre-Leopard systems?

  - by benc

  I want to get off an older Mac OS X system permanently. It is an iBook G3, so that has two important characteristics: Power PC, not Intel based. Runs only Tiger, not Leopard. This means, as far as I can tell: Cannot run Time Machine directly. Here's the approach I have been contemplating: Mount the drive in Firewire mode. Back up the drive as a external drive to the Time Machine volume. Disconnect the drive (permanently). However, I'm concerned that this drive will eventually age out, when the Time Machine volume fills up, and the old-system-as-external-drive is gone. Would it be better to do a single backup with another utility, to shared disk?

  Read the article

• Notebook with NVIDIA Optimus not switching video card in games

  - by user140739

  I have a Samsung RC720 notebook with Intel Integrated Graphics and NVIDIA GeForce GT 520M. As you can see it has two video adapters and Optimus is supposed to switch between them. But when I choose dedicated GPU in NVIDIA Control Panel and try to run, for example, GTA IV, it uses integrated graphics and I get very poor performance. I have already installed last NVIDIA and notebook drivers, chose high-performance in NVIDIA Control Panel, tried to execute with "Run with graphics processor..." context option and so on. Thanks for help.

  Read the article

< Previous Page | 111 112 113 114 115 116 117 118 119 120 121 122  | Next Page >