Search Results

Search found 27047 results on 1082 pages for 'multiple projects'.

Page 115/1082 | < Previous Page | 111 112 113 114 115 116 117 118 119 120 121 122  | Next Page >

• Multiple copies off the same printer on Windows 7 from PrintUIEntry

  - by Kev

  I currently have a number of bat files which work perfectly fine on Windows XP which install the same printer multiple times with a number of finisher options set - e.g. after running the bat file below I would end up with four printers in the printer drop down called Sharp Kits Printer - A4 Single Sided Sharp Kits Printer - A4 Single Sided Stapled Sharp Kits Printer - A4 Duplex Stapled Sharp Kits Printer - A4 Duplex which all have there options configured in the relevant way. I have amended on Windows 7 to point to correct INF file and printer name in the INF files - a single printer installs fine. However when I run the complete batch file only the first printer in it is installed - occassionally the later ones flash up in the GUI but then vanish when you press F5 and are still missing after a reboot. SET QUEUENAME=http://192.168.7.123:631/printers/Sharp700 SET PPD=J:\DRIVERS\Printers\MX700-Win7-64\SJ1JWENG.INF SET PPDENTRYNAME=SHARP MX-M700U PPD J: cd "\DRIVERS\Printers\MX700-Win7-64" SET NICENAME="Sharp Kits Printer - A4 Single Sided" SET PREFS="J:\SCRIPTS\Printers-Win7-64bit\Sharp_SINGLE_SETTINGS.dat" %SYSTEMDRIVE%\WINDOWS\system32\rundll32.exe %SYSTEMDRIVE%\WINDOWS\system32\printui.dll,PrintUIEntry /w /b %NICENAME% /x /n "part of the n switch" /f "%PPD%" /if /r "%QUEUENAME%" /m "%PPDENTRYNAME%" rem restore settings go here... SET NICENAME="Sharp Kits Printer - A4 Duplex" SET PREFS="J:\SCRIPTS\Printers\Sharp_DUPLEX_SETTINGS.dat" %SYSTEMDRIVE%\WINDOWS\system32\rundll32.exe %SYSTEMDRIVE%\WINDOWS\system32\printui.dll,PrintUIEntry /w /b %NICENAME% /x /n "part of the n switch" /f "%PPD%" /if /r "%QUEUENAME%" /m "%PPDENTRYNAME%" rem restore settings go here... I have tried adding the "/u" paramater to the end, I have changed the "/n" paramater to be different (e.g. n1, n2,n3 etc) - both of these result in the same. I have also tried to change the port (/r) to have "_1" (etc) on the end like the GUI would but this errors as the port doesn't exist. Is it possible to do this on Windows 7, and if so how?

  Read the article

• What is your preferred size and number of monitors?

  - by BenMaddox

  Do you like to have a single giant monitor, a couple mid-sized monitors or some other configuration? Specifically, I’m interested in your home general purpose computer system. (No media centers or netbooks)

  Read the article

• Second Monitor "Input Not Supported"

  - by Drew

  I have two identical monitors (new Acer s211hl) with a native resolution of 1920x1080. When enabling dual monitor support in Windows 7, the primary monitor works as expected, but the second monitor says, "Input not Supported" and fails to display anything. If I change the resolution of the second monitor to 1440x900, it works as expected. Likewise, if I set it to 1920x1080 with a refresh rate of 30hz, the monitor displays video. However, neither of these are solutions, because the output looks very blurry, and the content is stretched. I am using the following hardware: Monitors: Acer s211hl Motherboard: Asus F1A75M-Pro CPU/GPU: AMD A8-3850 with integrated Radeon HD 6550D graphics I suspect that there is probably an issue with the integrated graphics or motherboard not being able to output to two 1920x1080 monitors, but I am hoping for official confirmation.

  Read the article

• Have a set a cgi scripts shared by multiple domains

  - by rpat

  Goal: Have multiple domains share a set of cgi(perl) scripts Environment: Apache 2.0 on a dedicated Cent OS server. (Apache configuration files generated by cPanel) I have dozens of domains on the dedicated server. The domains set up by cPanel under VirtualHost section. I have almost no knowledge of Apache. Most of what I do is taken care of by cPanel. I would like to put a set of scripts under one directory (perhaps under / or /opt ) and for each of the domains, under the individual cgi-bin, I would like to create a symbolic link to this common directory. This way I am hoping to avoid having to keep a copy of scripts for every domain. Since Apache config files are generated by cPanel, I would not like to manually make changes to those. Beside, I could mess things up. I see that cPanel recommends use of include files rather than changing the httpd.conf Perhaps I need to have the following of symbolic links enabled in the cgi-bin directory and allow the web server user execute the scripts not owned by it. May be I am making things more complicated than they are. I would be glad to use any other means to achieve my goal. Thanks in advance for your help. *I asked this on stackoverflow and some one suggested that I could ask this on serverfault.

  Read the article

• How to disable monitor auto detection in Windows 7?

  - by Jay Yother

  I am currently running Windows 7 Ultimate 64-bit with a dual monitor setup with an NVIDIA 7950 GT graphics card. One monitor is dedicated to this machine and the other monitor is connected to a DVI KVM switch. When I switch to my other computer, Windows 7 disables the monitor. However, when I switch back it does not re-enable the monitor. The only circumstance that automatically re-enables the second monitor is when I switch back after Windows has put the monitors into power save mode. I am continually having to bring up the NVIDIA control panel to have it re-enable the monitor. Under Windows XP I would just disable the NVIDIA service to prevent it from auto-detecting the monitor (which doesn't solve the problem under Win7), and in Vista there was a registry hack that would prevent this. It looks as though that has been removed in Windows 7. I have found similar questions posted on this site, but nothing that matches my problem exactly. The following link is the question that comes the closest, but does not provide a solution to the problem. http://superuser.com/questions/96683/how-to-fix-monitor-detection-on-windows-7 Is there a way in Windows 7 to disable monitor auto-detection? Update: I just added a second graphics card to my Windows 7 64-bit machine. I plugged one monitor into each graphics card. Now, when I use the KVM switch to switch back and forth it will re-enable the second monitor like it should. There are however, a few quirks with this. If I have a program maximized on the second monitor and it has focus, when I switch it will move to monitor 1. If I have a program maximized on the second monitor and it does not have focus, when I switch it will behave like it is minimized and when I bring it back up it will show up maximized on monitor 1. Definitely better than it was, but still looking for a way to disable the auto-detection.

  Read the article

• 3 Headed Display Ubuntu Wallpaper

  - by Kyle Brandt

  I got 3 display working in Linux. I have set it up so I have Xinerama and 3 different X sessions. So my 3 displays are not all the same size, two are 1680x1050 and then the other which is between the two is 2560x1600. So my issue is when I chose span, even if the image is larger than all 3 resolutions combined, the center monitor has bars at the top and the bottom because span scales the image it seems. Is there a way if I bypass the gui to have an image span all three monitors but with no scaling? Urgent! Please help! ;-)

  Read the article

• How can use mod_rewrite to redirect a multiple specific URLs containing multiple query strings?

  - by Derek

  Hi there folks, we recently migrated a site from a custom CMS to drupal. In an effort to preserve some links that our users bookmarked (we have about 120 redirects) we would like to forward the original URLs to a new URL. I have been searching for a couple days, but can't seem to find anything simple to what I need. We have existing URLS that contain one or more query strings, for example: /article.php?issue_id=12&article_id=275 and we would like to forward to the new location: http://foobar.edu/content/super-happy-fun-article I started using: RewriteEngine On RewriteRule ^/article\.php?issue_id=12&article_id=275$ http://foobar.edu/content/super-happy-fun-article [R=301,L] This, however, does not work. A simple RewriteRule works: RewriteRule ^test\.php$ index.php It is unclear to me how I need to use {QUERY_STRING} with multiple Basically it's 120 simple redirects that go from one existing URL to a new one. I don't need ranges [0-9], because there is no sequential order to existing URLs. Perhaps I can do what I need with RewriteMap and a simple text file that contains a line like this: index.php?issue_id=12&articleType_section=0&articleType_id=65 http://foobar.edu/category/fall-2008 If anyone has any idea on using mod_rewrite to accomplish this or if there is a better, or more simple mod, I am open to that as well. Thanks!

  Read the article

• How to move windows that open up offscreen?

  - by Matthew Scharley

  I have a dual monitor setup, and I recently played around with the positioning settings, and some of my single window applications do the favour of preserving where they were last closed, and opening in the same position later. Unfortuanately, that now places them out of the viewable area of my screens! Is there some way to force a particular window into the viewable area? If it matters at all, this is on Windows XP 32b.

  Read the article

• Maximizing after moving RDC window between different size monitors

  - by msorens

  My Win7 system has two monitors of different sizes. When I open a Remote Desktop Connection on one monitor set to use full screen, both the RDC window and the remote system's desktop fills the monitor. If I then move the window onto my second monitor (1-Restore Down button to make it movable; 2-Drag window to other monitor; 3-Maximize button to fill monitor) the RDC window fills the monitor, but the remote system's desktop remains the same size it was before. Thus, if I move from the larger to the smaller monitor I have scrollbars to see the whole remote desktop, while if I move from the smaller to the larger monitor the remote desktop occupies only a portion of the monitor. My workaround is to close the RDC window completely then re-establish it on the other monitor. Is there a way to avoid this overhead and just resize the remote desktop to fit?

  Read the article

• How to prioritize tasks when you have multiple programming projects running in parallel?

  - by Vinko Vrsalovic

  Say you have 5 customers, you develop 2 or 3 different projects for each. Each project has Xi tasks. Each project takes from 2 to 10 man weeks. Given that there are few resources, it is desired to minimize the management overhead. Two questions in this scenario: What tools would you use to prioritize the tasks and track their completion, while tending to minimize the overhead? What criteria would you take into consideration to determine which task to assign to the next available resource given that the primary objective is to increase throughput (more projects finished per time unit, this objective conflicts with starting one project and finishing it and then moving on to the next)? Ideas, management techniques, algorithms are welcome

  Read the article

• Use only external monitor at screen's native resolution

  - by joaoc

  My laptop's screen lamp just died (I can see content on the screen if I point a light at it) and I was using it with an external monitor. I can switch from extended desktop to mirrored mode but, and here is where I need help, the resolutions don't match. The laptop's resolution is 1600x1200 and the external monitor is 1680x1050. I am ok with just using one screen ATM but I would like for it to at least use the native resolution of the external monitor. This is Windows XP and under Monitor settings I only get the resolutions for the original monitor under mirrored mode. How can I force the screen into a resolution not supported by the laptop screen but that is a native resolution for the external monitor?

  Read the article

• IIS6 can't find site on local network

  - by chezy525

  I have a windows 2003 server with dual NICs running IIS6. I can access everything remotely, but the internal network can't seem to find the site regardless of which IP Address I try to go to. There are really several weird things that are happening here, but I'm going to limit this question to what I'm guessing to be the simplest problem (the solution to which I'm hoping solves other things as well): From the server itself, I can access the webpage using the primary IP address (i.e. http://192.168.1.2/index.htm), but not using the secondary IP address (i.e. http://10.10.10.2/index.htm). Self pinging both IP addresses works, and the "Web site identification" in IIS has the IP address set to "(All Unassigned)"... which I believe should bind both IP addresses to this site. I apologize if I'm not providing enough details about my setup, but at this point I don't even know what's relevant...

  Read the article

• Dual Monitors Switching While Running Full-Screen Game?

  - by Phil Sandler

  I have a dual-monitor setup, and currently I can run a full screen game (Warcraft 3 and Starcraft 2 currently) and see still see anything I have open on my second monitor. I can't move my mouse from one monitor to the other, which is a good thing. However, I would like to know if it's possible to press some key combination and "release" my mouse control from the full screen game to my second monitor without the game minimizing (which is what happens when I ALT - Tab).

  Read the article

• Is it possible install one instance of Trac for multiple independent projects?

  - by grigy

  I want to set up an SVN/Trac environment for multiple projects, something like the GitHub. It will host multiple projects with multiple developers in each. For simplicity the developers can be independent from other projects. I want to setup this environment for every project automatically, from a registration page. What would be your recommendation? Particularly is it possible to do with Trac?

  Read the article

• How to stretch the image from one screen to two screens

  - by wxiiir

  I want to be able to stretch the image from one monitor to a second monitor even if i have to use some software to do it. For example i want the top half of the image that is now shown on my first monitor to occupy the whole second monitor and i want the bottom half to occupy the whole first monitor, or the other way around i don't really care as long as it works. I would be cool to know how to do the same stuff but to the left half and right half. I know that image pixels would have twice the lenght or height this way but i don't really care about it as long as it works so basically i want the stuff to show on both monitors but with the same pixels as before. I have a hd4870 and windows7 and hd4000 family doesnt support having two monitors behaving like a large one, only hd5000 upwards, this would solve my problems without any of the drawbacks but it just can't be done (or maybe it can via software but i'm just too tired of searching). A solution to make almost any graphic card have two monitors behaving like a large one is matrox dualhead2go but that's just as expensive as a good hd5000 card so it's not worth it. thanks in advance EDIT I guess that nobody so far was able to fully comprehend my problem that was very explicitly written but i will elaborate some more. My hd4870 can have 2 monitors working with it but some stuff like games won't run on both monitors, which sucks. There are some ways to circumvent this problem and two of them are perfect or almost perfect but expensive and the third would be a software solution that would make it possible. The first one is to have and hd5000 family video card which will work just fine with both monitors. The second is to have a matrox dualhead2go that will make my hd4870 detect my two monitors as a large monitor. The third is to have a software that makes my two displays be detected as a large display and then captures the output of the video card, splits the images and renders them as 2d images to both monitors OR a simpler one but that would make outputted pixels double the width or height would be to capture the output of the graphics card to one screen, split it in two and enlarge it to fit both monitors and then output it to the monitors. p.s. By capturing the output of the video card i mean just make the video card process the stuff in a certain way. Making the video card detect two monitors as a large one via software may be a bit impossible or impracticable but stretching the output as a 2d image from one to both monitors for some coders should be a walk in the park so it would be likely that such program would exist or that some widespread softwares for dual monitor would have such function in them.

  Read the article

• DIrect videos and slideshows fullscreen from another display

  - by neurino

  I have 3 displays: 1 control display I can see 2 40" Full HD displays I can't see my need is to play videos and presentations fullscreen on the two 40" screens while being able to control them from the control display. So far I am able to achieve this with a cumbersome set of keyboard shortcuts like: open VLC on control display send to left display with Win + Shift + Left go fullscreen with f and more combinations to restore, get VLC on control display etc. This is really error prone and not professional. Also I wish I have a media player and a slideshow player that can: send the same video / slideshow to the two 40" displays at the same time send two different videos / slideshows, one each 40" display having all controls on the central display, the only one I can see. Any advice welcome, thank you for your support.

  Read the article

• What to do with spare USB thumb drive?

  - by Brandon

  Just got a new USB thumb drive and now have a spare 8GB one laying around. Just curious as to what people do with their spare ones.

  Read the article

• Why do people like widescreen when it is, de facto, less space?

  - by Kerry

  I find that many of my friends/non-programmers or designers like widescreens. It makes very little sense to me as you in fact have less space than a 4:3 (do the math). The closer to a perfect square the more space you actually have on your screen. I got a 21" 16:9 and two 19" 4:3 The 21" is nearly the same height, but I think its a tenth of an inch shorter if I'm correct. I forget the calculation but it is nearly the same actual space. I can understand if you're using your computer for constant movie-watching but I think that's more of people's "ideal" than a reality. Thoughts?

  Read the article

• Windows 7, how to get unlock (Press Ctrl+Alt+del) prompt on all monitors?

  - by Zugwalt

  I have a laptop that I keep shut in a docking station as I have two screens connected to the laptop and it cannot display to both of those AND its own screen. However, when my computer locks by itself (Not when I lock it using Ctrl+Alt+Del) the login prompt is ONLY on it screen (at least its there when I open it up) and my primary external monitor is off and my other one is all black. This means to log in I have to hit Ctrl+Alt+Del and blindly enter my password--which I don't mind too much, but would prefer if I could actually see the unlock/login prompt instead of typing on a black screen. Any way to have it show the login prompt on all monitors?

  Read the article

• Single space on secondary display?

  - by zoul

  Hello! Is it possible to only have one space on secondary display when using Spaces on Mac? I’d like to have three spaces on the primary display and only use the secondary one as a common “sideboard” that does not change when I switch Spaces on the primary display.

  Read the article

• Suitable companion monitors for HP LP3065 30" primary monitor

  - by Bittercoder

  I have an HP LP3065 30" monitor - now I want to add a couple of companion screens to either side of it - I've heard to people suggesting 21" monitors in portrait mode - but it seems difficult to find a suitable panel these day, as 22" wide-screen monitors have become common, and I can't seem to find anything with a suitable 1600 pixel width. Can anyone recommend a suitable monitor, and suggest what criteria are best for picking a suitable monitor - what's important to consider - I'm thinking things like: Exact resolution match? Viewing angle? Small/thin bezel?

  Read the article

• Building a video wall with devices

  - by machunter

  I am entertaining building a video wall made out of many android devices. But I have to say I have no clue about how to go about it? The fact that these are android devices is not very important I am curious about the general approach to doing video walls with many separated devices. At best the desktop of one machine should be displayed on all the devices. If not I would be also interested in just showing just a video on that wall.

  Read the article

• Setting up a copy of a site with IIS 7?

  - by SJaguar13

  I have a site running on IIS with a dyndns.org domain that points to the IP of the Windows 2008 machine hosting it. I need a copy of that site for development purposes. I set up another folder with all the files, and create a new site in IIS. I don't really have a domain for it, so I was just going to use the IP address. When I go to localhost, 127.0.0.1, or the internal IP, I get bad hostname. If I use the IP address on port 80 (the same as the real version of the site), I get 404 not found. If I use a different port so I don't have them both on the same IP with the same port, I get connection timed out. How do I go about setting this up?

  Read the article

• Applescript won't open applications on my external monitor

  - by jpadvo

  I'm trying to open a new MacVim window with Applescript, and have found partial success with this: do shell script "cd \"~/code/application\"; ~/bin/mvim > /dev/null 2>&1" This works fine, and opens a new MacVim window with it's working directory set to ~/code/application. BUT it always opens on the screen of my laptop, not on the external monitor with the currently active space where I am working. Is there a way to get MacVim to open in the current space? Edit: same problem with opening a finder window: tell application "Finder" to make new Finder window

  Read the article

• How do I move an Amazon micro instance to a small instance?

  - by Navetz

  I want to move my instance to a micro instance to a small instance but when I try to launch a new AMI based on my Micro instance AMI it only gives me the option for 64 bit instances. My initial ami is based off an ubuntu 10.04 image. Is it not possible to move between 64 bit and 32 bit instance? Would it be possible to use a load balancer to have a 32bit instance and a 64bit instance work together? I have a website/web app that I will be uploading huge volumes of data to. I will be starting with 65gigs of images and then moving up to 100+ gigs of images. I am not sure which instance type would be best for this. I was going to use a load balancer and auto scaling to increase the number of instance when the load is high. Also when using a load balancer, does one of the AMI instance become the primary image and the rest act as clones of it?

  Read the article

< Previous Page | 111 112 113 114 115 116 117 118 119 120 121 122  | Next Page >