Search Results

Search found 42115 results on 1685 pages for 'access management'.

Page 1158/1685 | < Previous Page | 1154 1155 1156 1157 1158 1159 1160 1161 1162 1163 1164 1165  | Next Page >

• Experience with AMCC 3ware 9650se raid cards? Ours seems dead

  - by antiduh

  We have a 8-port 3ware 9650se raid card for our main disk array. We had to bring the server down for a pending power outage, and when we turned the machine back on, the raid card never started. This card has been in service for a couple years without problems, and was working up until the shutdown. Now, when we turn the machine on, the bios option rom that normally kicks in before the bootloader doesn't show up, none of the drives start, and when the OS tries to access the device, it just times out. The firmware on it has been upgraded in the past, so it's possible we've hit some sort of firmware bug. We're using it in a Silicon Mechanics R272 machine with gentoo for the OS. The OS eventually boots, but alas, without the card. We've ordered a new one, but I'm worried that if we replace the card it won't recognize the existing array. Has anybody performed a card swap before? Any help would be greatly appreciated.

  Read the article

• Wifi connected but no data transfer

  - by Anuj

  I have a Desktop which runs on Windows XP and a laptop which runs in Ubuntu. Recently I have set up a wireless router in order to be able to access internet on my laptop through wifi. The laptop connects to the wifi at ease, but is unable to transfer any data. Only when I switch on my laptop for the first time, it is able to transfer some data only for around 2 mins, after which it shows Destination Host unreachable on pinging the router, and everything stops working, but the wifi still shows to be connected. Please help!

  Read the article

• How do I get Dreamweaver to deploy syntax highlighting for full script CFC's?

  - by Mel

  Is there a way to get Dreamweaver CS4 to use syntax highlighting when writing full script CFCs? If the document type is .cfc and they syntax is fullscript, there is no syntax highlighting; the code will be in black text... For example, the following block of code will appear without syntax highlighting: component extends="whatever" output="false" { public void foo() { } } While the tag equivalent would be highlighted normally: <cfcomponent extends="whatever" output="false"> <cffunction name="foo" returnType="void" access="public"> </cffunction> </cfcomponent>

  Read the article

• Problems connecting Centos on VMware player to the network using bridged connection.

  - by Sakin

  Hi, I installed CentOs on VMware Player 3.0.1 running on windows XP. When trying to configure it to connect to the internet in a bridged configuration, I get an error message when trying to bring up the network interface: [root@VMLinux ~]# /et/init.d/network start Bringing up loopback interface: [ OK ] Bringing up interface eth0: Determining IP information for eth0... failed [FAILED] VM is running on a machine that has access to the network, I tried it on two different networks that have DHCP enabled. Everything works fine when using a NAT connection through my host. How can I make the bridge work for me? Thanks.

  Read the article

• How to share internet connection on Mac os x to Virtualbox vm's using Host-only

  - by redben

  In one line : is the following possible : Airport <- osx bridge - vbox-Host-only - vm's On a mac os x, i have virtual box with a virtual machine. For now i have configured 2 interfaces for my virtual machine eth0 is normal bridge for my vm to acces the internet (when airport is connected) eth1 is set to host-only so i can access my vm from the host when there is no wifi/aiport is down. So basically it's like Adapter 1 when there is Wifi, Adapter 2 when there is not. I'd like to have only one configuration to make it simpler. I thought i could just keep the Host only configuration, and on the host (os x) go to internet sharing and select "share from airport" to vboxnet0 (the vb virtual interface). Only to find out that vboxnet0 dosn't show up in the interfaces list on os x preferences. I know that on a linux host you could install something called bridge-utils and use that to bridge the two insterfaces. Is there any thing like that for Mac ?

  Read the article

• Sharing a printer over the net from Windows 7 to Windows Server 2003

  - by Grant Unwin

  Hi, I need to share a printer that is connected to a Windows 7 computer. The windows 7 computer is in another building about an hours drive away. The computer that needs to access the printer is running Windows Server 2008. Ive tried setting the printer as 'shared' for 'everyone' on the Windows 7 PC and accessing it from the server by adding a TCP/IP port to the IP address but the printer just wont add. From googling aparently it may need setting up as a printer server through IIS, but i'm just not sure on the best practice. Any help greatly appreciated. Thanks Grant Unwin

  Read the article

• Can't telnet to SQL Server

  - by Thiago

  Hi there, I have an SQL Server running on a computer, and I'm trying to access it from another computer in the same local network (potentially VPN, since it's located in a datacenter). The point is that I can't even telnet to the port in which SQL Server is listening. And yes, SQL Server is working, since I can telnet to it from my workstation. I think it's something in the host, since there's no hop between the two computers, but I don't know how to troubleshoot this. Basically I get a connection failed, when I try to telnet. What can cause such problem, since apparently there's no firewall and the server is accepting connections from other computers? Thanks in advance

  Read the article

• Simple active directory permissions issue

  - by Antonio2011a

  So I've created a domain controller (DC) as well as 3 machines (SQL-A, SQL-B, SQL-CORE). All are running Windows Server2008R2 (on virtualbox). I have successfully joined the 3 machines to the domain controller. Next I created a user in active directory called Kim_Akers who is a member of "Domain Admins", "Domain users", "Enterprise Admins" and "Schema Admins". However when I login to SQL-A for example as contso/Kim_Akers and then try and run something like the ServerManager.msc I can't do it due to lack of permissions "Windows cannot access the specified device, path or file. You may not have the appropriate permissions". What am I doing wrong that Kim_Akers doesn't have permissions to do this? Thanks.

  Read the article

• usb mouse connecting and disconnecting randomly and often

  - by Kalec

  Yes, I know this question has been asked here before but I can't add to the discussion over there and it did not help me, so here goes nothing. I've bought an acer aspire 5742G about 2 months ago or so and it's been running great, but sometimes I used to hear the windows error beep but I had no idea what was causing it since the "bug" was automatically fixed so fast I couldn't even see an error message (also it kinda always happened when I was busy also, either in a game or while doing my homework). Later on my mouse would simply not work for 3-5 seconds then work again, I thought nothing of it at the time. I also had a problem where it only worked in one usb and one only ... to move it I had to remove the battery, unplug the laptop and hold the power button for 2 minutes to reset the bios settings. Since today though it went nuts ... sometimes it disconnects / reconnects 12 times in 10 seconds and windows just keeps beeping till I unplug it, then it runs smooth for 5-6 minutes then it goes nuts again. Other times it seems like it skips (disconnects for a fraction of a second) other times just for 2-3 seconds. But this is incredibly frustrating. Sometimes the power just goes down (the laser turns off) and well that at least I would understand but this is a rare occurance. Now I know the usb ports work since I have a lot of other devices connected and I tried the mouse on a room m8's laptop so the mouse also works. My only conclusion is that it's an operating system / settings bug and / or problem (I have tried the mouse in all ports by the way). All drivers and bios are up to date (maybe except mouse but i can't seem to update that and the mouse has no name, just a serial number which helps with nothing. Still it worked till today and nothing should have changed any way). I have made sure windows can't shut it down to save power (in device management). Also I tried to delete the drivers and re-install them, rebooting and the power button trick but nothing ... most I have done is get rid of the 12 discconnects / reconnects every 10 seconds :) but that's all :( I would buy a new one but I'm afraid it might do the same thing :| ****EDIT****** Tried the mouse again at a friend but now it didn't even install it's software nor did the update work ... think I'll just buy a new one but I'd still like a suggestion at least so I'll leave this open

  Read the article

• Must I have Exchange to use Blackberry Enterprise Server Express?

  - by John Spaz

  In the past I've setup BES (not express) for a company that just wanted their users on the corporate network, they didn't care for email or any other enterprise feature, they just wanted to push a policy that the phones internet should be routed through the corporate network. I want to setup BES Express now for a customer that also just wants the phones on his network but wherever I look, it says that BES Express requires Exchange. Is there a way to install BES Express without Exchange and without a AD Domain? Basically what the customer wants to accomplish is to be able to filter and log the internet access on the phones.

  Read the article

• iPod Touch G4 disconnects from Belkin N+ Router at random intervals

  - by leeand00

  I have an iPod Touch G4 and a Belkin N+ Router F5D8235-4 v2, and for some reason the iPod Touch disconnects from the router at random intervals. Checking the settings in the iPod, it will read that it is still connected to the router, but before I can access the internet again, I have to turn on Airplane mode and then turn it off again to get any program to work with the Internet again. I've tried upgrading the firmware in the router, but that also doesn't seem to help. I'm using the wiresless mode 802.11b&802.11g&802.11n in the 20/40MHz frequency. Is there any way of fixing this issue? It doesn't happen with any of the other devices that are connected to the router. This post has been cross-posted here

  Read the article

• Can many addon domains slow down cPanel or create problems?

  - by Marco Demaio

  I actually resell hosting plans by using one single cPanel account and many addon domains under it. Basically for each new user I don't create a new cP account, but I simply create a new ADDON domain and give him the necessary space. I know in this way the final user won't be able to manage his emails and he won't be able to access all cPanel features, but that's ok. I know in my account I'm allowed to add unlimited addon domains, but adding many addon domains is there something that might happen that slows down cPanel or could create problems? Any suggestions you could give me about the way i'm using cPanel which might not be the usual way of using it. (As for instance: "be aware that mails from different addon domains under the same CP account could create many problems.", etc.) Thanks!

  Read the article

• Separating two networks

  - by Farhan Ali

  I have two routers, R1 and R2. R1 (a stock linksys router running dd-wrt) is connected to internet and is serving internet to a network of 5 devices/PCs running a DHCP server, with a network of 192.168.1.0/24. R1 also serves internet services to R2. R2 (a ubuntu server 12.04) gets internet from R1. R2 has 3 PCs attached to it, runs a DHCP server with a network of 172.22.22.0/24. My requirement is that the clients on both sides should not talk to each other at all – with the exception that R1 clients may access the R2 router through its IP of 192.168.1.x. At the moment, R2 clients are able to ping R1 clients, which is unacceptable, whereas R1 clients cannot ping R2 clients, which is OK. I believe iptables could be set up but I don't know how.

  Read the article

• Copying OS X account settings to new user account

  - by Donna Crain

  Hi I hope someone can help me... I accidentally renamed my own user name on my mac running OS X 10.4.11 and tried renaming back to what it was but now I have two accounts (the one I want to use which has all my preferences, applications, mail boxes, etc etc) is it possible to copy my settings from my original into this new user name? When I open my computer it defaults to this new account but everything is setting up from new and I just need to get access to all my work documents, mail settings etc. If there is anyone who could help out, I would be very grateful. Thank you in advance.

  Read the article

• Can the Windows 8.1 update be applied without local terminal?

  - by Ben Voigt

  It is possible to access the Windows Store from a remote desktop session and initiate the Windows 8.1 Update from the Windows Store, but the update hangs after the first reboot, likely waiting for the user to accept the license check. This leaves the computer unusable remotely. Is there a way to pre-accept the license terms so that the update can complete autonomously? Perhaps an UNATTEND.XML such as would be used for an unattended clean install? Failing that, is there a way to connect with remote desktop during that phase of the install (it appears to be GUI-mode setup running with the usual Windows kernel and full OS)?

  Read the article

• Ho do you view all your monitoring software

  - by BLAKE

  In my office I have all our monitoring tools setup and working great, but I dont have an easy way to view them. I have a large TV in my office plugged into an old PC that has my nagios status page always showing. If I need to change anything on that computer I use Synergy to access the computer from my desktop. We are thinking about adding another TV and I want some suggestions on setting it all up. We are a 99.99% Windows shop. What do you use to run all the TV's in your helpdesk? Synergy works for me, but what if one of the other admins want to change the screen? Is there any easy way that any of us (currently 4 people) can change the screen from our desktops? (Remote desktop doesn't work because it locks the console which is the output to the TVs.) Any advice would help, Thanks.

  Read the article

• Can I run a web site from my home network without jeapordizing other computers on my LAN?

  - by Alchemical

  I have a home LAN with 5 computers and a NAS, all connected to a Linksys router which is connected to my Cox cable modem. I'm interested in having one of my computers run an IIS-based web site and to have it be accessible to the internet with a static IP. However, I do not want o jeapordize the safety of the other computers on my home network! Is there anyway to do this safely, or as safe as possible? I may also like to run an FTP server from this computer. Finally, optionally I would like to allow remote access to this computer from the internet--but it seems to me that that may increase the security risk to the other computers substantially.

  Read the article

• Setting up SVN+SSH for multiple users through one local user.

  - by Warlax

  Hi, I need to make our SVN repository accessible through the firewall - but without creating a local user for each potential external user. Instead, I would like to set-up SVN+SSH to route all external users through a single local user name. We would like each external user to authenticate with SSH the regular way but then treat their instance of svnserve as if they're all that single local user and possibly, control what parts of the repository each external user can access. I know that I will need to set my svnserve config according to the official guide. I tried, but the instructions are fuzzy and I am relatively a Linux n00b. What exactly are the steps to proceed? and how would you go about testing this? Thanks for your help.

  Read the article

• How do you implement NAT-T passthrough on a Juniper SRX series Firewall?

  - by Chris

  We have 3 juniper SRX-100 firewalls, they are configured like so: FW1 - FW2 - INTERNET - FW3 We would like to create an IPSEC tunnel between FW3 and FW1 passing through FW2 preferably using NAT-T. Is this possible? FW1 and FW2 have some strict access rules only allowing 1 port connected (it's a DMZ with a server in) so we can't just create a route based vpn between FW1 and FW2 to forward the traffic (otherwise all traffic will be forwarded) We know the tunnel is fine because we have managed to test it between FW1 and FW3 (without FW2 in the middle) so we know that the issue is to do with the 'passthrough' on FW2. Essentially, the question is - What options do we need to select on FW2 to enable it to pass through the IPSEC traffic straight to FW1? Many thanks in advance

  Read the article

• Can Linux works as 802.1X authenticator in bridge mode ?

  - by Kartoch

  I want to create a lab for my students with netkit (a network emulator based on 802.1X) to study 802.1X. I can create the authentication server (FreeRadius) and configure the client with XSupplicant connected by a switch (a Linux in bridge mode). I'm looking to a way to configure the switch as Authenticator, i.e.: when the client is connected, the switch only forwards EAP packets to the authentication server. then the switch lets the user access to the local network when the authentication server authorizes the client. At the present time there is a lot of documentation to do this with a wireless point but no one for a switch. Does anyone have an idea or know the good software for it ?

  Read the article

• Apache Front End....Tomcat back end...SSL question

  - by Jared

  Hi Everyone, Question.... I have Apache setup as my webserver. Tomcat is hooked into Apache via mod_jk, so the user never interacts with Tomcat. I have set up SSL on the Apache Webser...I can hit it with https:// localhost When I try to access my application at ...https://localhost/app I get a directory not found error. Catch is when I go regular http... I can hit it fine... http:// localhost/app What do I have to edit for this connection to work? I have uncommented the AJP connector in server.xml I have added my virtual host to httpd.conf What am I missing? Thanks in advance. Jared

  Read the article

• Wireless is not currently enabled

  - by ikartik90

  I have a HP Pavilion TX2000 tablet PC with me with windows 7 OS running on it. I used to access the Internet using my D-Link DIR 615 wireless adapter on the tablet and it used to work quite fine until one day, when I hibernated my Windows 7, the wireless went off and the problem seems to persist even after my hard efforts to clear it. I checked if the router works fine, and yes it did as my iPod was still catching wireless signals on the other hand, when I checked mu device manager, I realized that I now had no wireless driver. I checked on HP's website for one, but ironically even they didn't have wireless drivers meant for my tablet for Windows 7. Please help me find a solution to this problem. Further queries will be entertained as frequently as possible. Thanks.

  Read the article

• Administrator File Modification Privilege

  - by Leigh Riffel

  Windows Server 2008 apparently allows an application to somehow configure the folder so that any changes made within the folder require administrator level access. I login with an account that has administrator privileges, but is not the local administrator account. When I do so I find that I can't save changes to files opened within this folder. I know I can open the application as administrator or move the file out of the folder, make the change, then move it back in, but I'm hoping there is a better way short of disabling the protection entirely. Is there a way perhaps to remove it for the files I frequently edit?

  Read the article

• Can't communicate with Primary DNS Server

  - by horsley

  A computer, with Windows 7, can't access any website by domain suddenly. Whether this computer use a wired link or connect to the WLAN, The fault persists IP and DNS obtained automatically, and seems normal (ipconfig /all return the correct info) I can visit websites by using HTTP proxy The DNS server is available, other computer in my room works properly. I can ping myself, the gateway and any other IP, but domains I can use nslookup and obtain the correct IP info There are some error information in the event log about dns client events explaining the client can not verify the DNS server available Windows network diagnosis explain that Windows can't communicate with the device or resource (Primary DNS Server) I guess the dns client should be blame. I tried to do the following things but the fault persist. Reinstall the driver of network adapter Reset TCP/IP (netsh int ip reset) Reset Winsock (netsh winsock reset) Reset LSP I don't want to reinstall the whole os, what should I do?

  Read the article

• Making Lync option visible in Outlook/GAL/AD

  - by Kjensen

  In a big organization, people are slowly moving towards using Lync and away from using landlines. A handful of times per month, I get a meeting invitation that includes a conference call number and a remark about "not sure if everybody is on Lync". Often everybody is, and we start in a conference call and switch to Lync. Is there a good way to make it visible if a user has access to Lync? Like I can hit the "Online meeting" button in Outlook - and it would be great to see, if everybody invited support Lync. Does something like that exist?

  Read the article

< Previous Page | 1154 1155 1156 1157 1158 1159 1160 1161 1162 1163 1164 1165  | Next Page >