Search Results

Search found 86974 results on 3479 pages for 'visualsvn server'.

Page 1162/3479 | < Previous Page | 1158 1159 1160 1161 1162 1163 1164 1165 1166 1167 1168 1169  | Next Page >

• Assigning a home DNS to be secondary only?

  - by Sanarothe

  Hi. I have a small domain lab set up at home, including DNS/DHCP on the Win2008 server. I'd like to be able to refer to my domain clients by name, but I find that I get a slowdown when using an internal DNS. Win DNS refers to my ISP's upstream dns (I also tried Google's DNS servers for a little while) but it feels like there's an extra couple seconds for each request when I'm using anything except the DNS servers fetched via DHCP from my ISP. I tried adding my local DNS to my router's DHCP (Need to use router to fetch DHCP info from ISP, even though none of it ever changes, since I'm behind NAT) So, my question is: Is there any way to set my internal DNS server to be secondary to a dynamically retrieved upstream DNS? I want the internal server to be queried only if the ISP dns fails, or to be queried only for a certain TLD (.iv right now. I guess for best practices I should change it to .internal)

  Read the article

• hp ilo "remote console undefined"

  - by javapowered

  After upgrading my server (HP DL360p Gen8) to the latest ILO 4.30 I have such error What should I do and how to fix my problem? I do not have physical access to my server and so now I have no access at all (I still have ILO with no remote console) I think probably I should use "back-up" copy of ilo if it stored on server... or should I reupload some another ILO version? upd I've noticed that undefined link is "https:///html/undefined", i think I can try "hack" and just type direct link to "remote" page, but i do not have an address. It should be something like "https:///html/remote.html" Probably someone, who has access to ilo, can give me a link?

  Read the article

• HP Loadrunner failed to start .NET Diagnostics probe

  - by Johnbo

  I've got a HP Diagnostics Server (commander mode) installed in the same PC where HP Loadrunner is. I've installed the .NET probe in the web application server. When I navigate localhost:2006/registrar/health I can see the CommandingServer and three instances of the probe, all in green and connected. Then, when in LoadRunner controller I enable Diagnostics, select the probe and start the scenario, I get the next error: Failed to start J2EE/.NET Diagnostics run. (Facade error: Unable to send 'startRun' notification to probe MyAgent.1347615505142149) I've looked at the firewall logs and the rule that lets the server send commands to the probes has been matched three times. What else could it be what doesn't let me start the probe?

  Read the article

• Exchange 2007 Owa (OnlineVersion) can not authenticate

  - by DingosBarn

  Exchange Authentication dll: https://red002.mail.emea.microsoftonline.com/owa/auth/owaauth.dll sending style is: request.Method = "POST"; request.ContentType = "application/x-www-form-urlencoded"; And sending following message destination=https://red002.mail.emea.microsoftonline.com/owa/[email protected]/?ae=Folder&t=IPF.Appointment&[email protected]&password=xxxx I'm getting this error: The remote server returned an error: (400) Bad Request. If I use the path in a webbrowser it is accesable. It is not a bad request indeed. The server is Exchange server 2007 and replaced the path for owa. But it can not auth the path?

  Read the article

• OpenLDAP and Samba, can't log onto Samba share from Windows

  - by Jakobud

  The former jackass IT-guy that I'm taking over for had a Samba share setup on a Fedora server that uses our OpenLDAP server to authenticate users who want to log in from Windows. We recently added a new employee and I jumped through the LDAP hoops to add them to the system. However, I can't seem to use their login to access the Samba share. I'm looking through the LDAP settings and Groups and comparing the new user account to existing ones, and I can't figure out what settings in LDAP are required for this user to be able to access the Samba share. Of course the former idiotic IT-guy didn't document a single thing and has all sorts of weird setups on the network. So I'm at a bit of a loss on knowing what to look for here. Where should I start? On the server that is hosting the Samba share, he has samba running obviously but also has smbldap-tools loaded as well.

  Read the article

• Disable static content caching in IIS 7

  - by Lee Richardson

  I'm a developer having what should be a relatively simple problem in IIS 7 on Windows Server 2008 R2. The problem is that IIS 7 is overzealously caching all static content on the server. It's caching all .html and .js content and not noticing when the content changes on disk unless I iisreset. I've tried the following: Deleting the local cache in my browser (I'm 99% positive this is a server caching issue) In IIS Admin in OutputCaching adding an .html extension and unchecking "User mode caching" and unchecking "Kernel-mode caching" In IIS Admin in OutputCaching adding an .html extension and checking "User mode caching" and selecting the radio for "Prevent all caching" In IIS Admin editing Output Cache Feature settings and unchecking "Enable cache" and "Enable kernel cache under OutputCaching. Running "C:\Windows\System32\inetsrv\config\appcmd set config "SharePoint - 80" -section: system.webServer/caching -enabled:false" Looking through applicationHost.config and disabling anything related to caching I could find. Nothing seems to work. I'm getting very frustrated. Can anyone please help?

  Read the article

• Problem starting Glassfish on a VPS

  - by Raydon

  I am attempting to install Glassfishv3 on my Ubuntu (8.04) VPS using Java 1.6. I initially tried starting the server using: asadmin start-domain and received the following error message: JVM failed to start: com.sun.enterprise.admin.launcher.GFLauncherException: The server exited prematurely with exit code 1. Before it died, it produced the following output: Error occurred during initialization of VM Could not reserve enough space for object heap Command start-domain failed. I attempted to run it again and received a different message: Waiting for DAS to start Error starting domain: domain1. The server exited prematurely with exit code 1. Before it died, it produced the following output: Error occurred during initialization of VM Could not reserve enough space for object heap Could not create the Java virtual machine. Command start-domain failed. If I run cat /proc/meminfo I get the following (all other values are 0kB): MemTotal: 1310720 kB MemFree: 1150668 kB LowTotal: 1310720 kB LowFree: 1150668 kB I have checked the contents of glassfish/glassfish/domains/domain1/config/domain.xml and the JVM setting is: -Xmx512m Any help on resolving this problem would be appreciated.

  Read the article

• Samba4 advice for production use

  - by pgb

  I have an old Samba 3 + LDAP server installed that needs to be rebuilt. I'm weighting my options, and Windows Server seems too expensive at the moment, and Samba 4 appeared to be a nice option, coupled with the last Bind 9 that can dynamically add the computers to the DNS. I have about 30 workstations, so I still consider it a small network. My questions are: Is Samba 4 stable enough for production? It seems as if the Samba team is too cautious on when to call their version final, or even beta, as compared with other open source projects. What Linux distribution would you recommend to set it up? I usually use Ubuntu Server, but may use another one if installing / maintaining Samba 4 is better on that one.

  Read the article

• Configuring IIS7 for TLS 1.0 only

  - by tomfanning

  I have been tasked with configuring an IIS7 server to accept TLS 1.0 HTTPS connections only. I have come up with the following list of cipher suites which I have deduced are TLS 1.0. TLS_DHE_DSS_WITH_3DES_EDE_CBC_SHA TLS_DHE_DSS_WITH_AES_128_CBC_SHA TLS_DHE_DSS_WITH_AES_256_CBC_SHA TLS_RSA_WITH_3DES_EDE_CBC_SHA TLS_RSA_WITH_AES_128_CBC_SHA TLS_RSA_WITH_AES_256_CBC_SHA I have put that list in the box in the following policy: Computer Configuration | Administrative Templates | Network | SSL Configuration Settings | SSL Cipher Suite Order Is that sufficient? Are any of the suites in my list not TLS 1.0? Are there any other TLS 1.0 suites supported by IIS7 that aren't in the list? The server, by the way, is Windows Server 2008 R2. Thanks

  Read the article

• FTP connection is aborted

  - by Conrad C

  I want to connect using FTP to my webpage hosted on ipages.com , but I always get this error on filezilla.: Status: Server does not support non-ASCII characters. Status: Connected Status: Retrieving directory listing... Command: PWD Response: 550 PWD: Permission denied Error: Failed to retrieve directory listing Error: Disconnected from server: ECONNABORTED - Connection aborted It looks like the connection is established but then disconnects. Is it an issue with the host? I use the default port 21. The user-pass is working. And the ftp adress is ftp.mysite.com I tested the port 21 using netstat and I get 220 Ipage FTP Server Ready

  Read the article

• Apple File Sharing fails to connect

  - by Josh

  Running OSX Lion Server (10.7.4), and about once a week or so the Apple File Sharing service stops letting clients connect to its shares. On the client we will see a dialog box stating "There was a problem connecting to the server ". Browsing the server we simply no longer see the shares. The clients are also running the latest OSX (10.7.4) In /var/log/system.log we see entries like the following: Jun 26 08:38:22 w3 AppleFileServer[20511]: received message with invalid client_id 157 Jun 26 08:42:11 w3 AppleFileServer[20511]: received message with invalid client_id 165 Jun 26 08:42:21 w3 AppleFileServer[20511]: received message with invalid client_id 174 Where 20511 appears to be the pid, and client_id appears to be incremented with each failed attempt. Nothing jumps out at me from /Library/Logs/AppleFileService/AppleFileService[Access|Error].log Restarting the service fixes the problem: serveradmin stop afp && serveradmin start afp So I added a script to do this daily using the periodic service. But, we still encounter this problem about once a a week.

  Read the article

• Trust my work domain on a Dev Domain without a domain level password

  - by Vaccano

  I setup a virtual machine to host a dev version of TFS (to test plugins on). Getting a computer on my work domain requires large amounts of red tape and paperwork that I would rather not do. I created my own domain the the VM and I would like to trust all users from my work domain on that VM Domain. But when I tried to setup the trust I needed a password from my work domain (which I don't have). Am I trying to do something nefarious? I just want to be able to authenticate to my Test TFS (VM) Server as me (my login on my work domain). Is there a way to do that with out having to have a domain level password for my work domain? (My VM is a Windows Server 2008 R2 server)

  Read the article

• Determine nginx reverse-proxy load limits

  - by Aaron

  Hi all: I have an nginx server (CentOS 5.3, linux) that I'm using as a reverse-proxy load-balancer in front of 8 ruby on rails application servers. As our load on these servers increases, I'm beginning to wonder at what point will the nginx server become a bottleneck? The CPUs are hardly used, but that's to be expected. The memory seems to be fine. No IO to speak of. So is my only limitation bandwidth on the NICs? Currently, according to some cacti graphs, the server is hitting around 700Kbps ( 5 min average ) on each NIC during high load. I would think this is still pretty low. Or, will the limit be in sockets or some other resource in the operating system? Thanks for any thoughts and insights. Aaron

  Read the article

• Hyper-V Boot failure on VHD made with Acronis?

  - by gary

  hoping someone can advise on my problem, I am running Hyper-V core and trying to create my first VM for testing purposes. Using Acronis True Image echo server with UR I converted a Seerver 2000 tib to VHD. I then copied this across to the Hyper-V local drive and created a new VM pointing the hard drive to the vhd image. When I boot this up all I get is "Boot failure. Reboot and Select proper Boot device or Insert Boot media in selected Boot device". The original server had SCSI disks, the Hyper-V server doesn't, but I have ensured that it boots from an IDE disk and that it is in fact booting from that not the CD. I can only imagine this is caused by the SCSI disks on VHD but cannot for the life of me work out how to fix, I have several of these I need to do so starting to worry now! I can confirm that when I did this from tib to vmdk it worked first time using VMware on a laptop. Any help very much appreciated. Gary

  Read the article

• Sendmail not working from local PHP when headers not specified

  - by Dan

  Hi. I'm having trouble getting my local XAMPP server to send emails via my remote SMTP server. In PHP, if I put: $headers = "From: [email protected]\r\n"; mail('[email protected]', 'test', '', $headers); Then this works. However, if I don't specify the header, ie.: mail('[email protected]', 'test', ''); Then this fails. The sendmail.log file says: smtpstatus=554 smtpmsg='554 Message refused.' errormsg='the server did not accept the mail' exitcode=EX_UNAVAILABLE I've tried changing my sendmail command in my php.ini to: sendmail_path = "C:/xampp/sendmail/sendmail.exe -t -f [email protected]" but this doesn't work either. Thanks for any help with this, Dan. ps. this is on windows.

  Read the article

• Force Capistrano to ask for password

  - by Moshe Katz

  I am deploying using Capistrano to a new server and having the following issue. Currently, I cannot add an SSH key to the server to log in with so I must use password authentication. However, I do have a key for another server saved in my local user account's .ssh directory. Here is the error I get when I try to log in: C:\Web\CampMaRabu>cap deploy:setup * executing `deploy:setup' * executing "mkdir -p /home2/webapp1 /home2/webapp1/releases /home2/webapp1/shared /home2/webapp1/shared/system /home2/webapp1/shared/log /home2/webapp1/shared/pids" servers: ["myserver.example.com"] connection failed for: myserver.example.com (OpenSSL::PKey::PKeyError: not a public key "C:/Users/MyAccount/.ssh/id_rsa.pub") How can I get Capistrano to ignore the existence of the key I have and let me log in with a password instead? I tried adding set :password, "myp@ssw0rd" to deploy.rb and it didn't help.

  Read the article

• Redirect as a backup trick? w/o modifying DNS?

  - by acidzombie24

  I specifically looked up how to do something like this ( Can you set a backup ip for your server in DNS? ) and the answer basically was you can't. If i say specify 2 ip addresses could i somehow use a HTTP response header to ignore it temporary (say 5mins) and go to the other IP address? Or maybe i can play dead however i'm unsure how to play dead using nginx. I then would like to be available after my box notice the other box is down and be some kind of readonly server. I'm sure something like this has been implemented i am just wondering how i might implement it with 2 boxes. I'm sure it isn't very difficult? How might i redirect traffic from a backup box to my main server without modifying the DNS?

  Read the article

• Error when Sending Emails

  - by dallasclark

  A client of mine keeps receiving the following email when sending mail but their emails are sent successfully. Your outgoing (SMTP) e-mail server has reported an internal error... The server responded: 451 qq read error (#4.3.0) In the mail log (/usr/local/psa/var/log/maillog) I receive the following error: /var/qmail/bin/relaylock[3152]: /var/qmail/bin/relaylock My SMTP Service is setup as followed, if this helps service smtp { socket_type = stream protocol = tcp wait = no disable = no user = root instances = UNLIMITED env = SMTPAUTH=1 server = /var/qmail/bin/tcp-env server_args = -Rt0 /var/qmail/bin/relaylock /var/qmail/bin/qmail-smtpd /var/qmail/bin/smtp_auth /var/qmail/bin/true /var/qmail/bin/cmd5checkpw /var/qmail/bin/true }

  Read the article

• Connection lost to iscsi san after problem with san

  - by marceldejager

  Hi there, We have a cluster running with 3 VSpere ESX4 server that all are connected to a lefthand san through iSCSI. This all worked well but a week ago there was a problem with the san. After fixing that problem the VMWARE server continued working but this weekend I saw that 1 server didn't have a connection with the SAN. The other two work perfecly. I looked at all setting and I cannot find a problem. Nowhere I can't find any erros. Has anybode a idea? Thanks, Marcel

  Read the article

• OpenVPN Bridge LAN-to-LAN Configuration?

  - by Shad Reese

  I'm trying to configure an OpenVPN bridge LAN-to-LAN setup. Currently, I have the OpenVPN bridge Server/Client setup up running. On the server-side my br-lan interface has tap0, eth0, and wlan0 in the bridge group. On the client-side the br-lan interface has eth0 and wlan0 in the bridge group, the client tap0 is outside of the br-lan group. Currently the two bridge groups are connected via the wlanO interfaces (server-side is the Access Point - AP and the client-side is the wireless client). My goal is to connect the two bridge groups with a wireless VPN pipe. My network configuration: Server: br-lan: 10.4.96.50 Client: br-lan: 10.4.96.75 tap0: 10.4.96.100 <---- issued by the VPN server. Unfortunately, I'm stuck with using a bridge instead of a routed OpenVPN setup. My question is how (if possible) do I add the client tap0 interface to the client bridge group, as to ensure all traffic between the server/client bridge groups is using the VPN pipe? SERVER CONFIG FILE. config openvpn sample_server # Set to 1 to enable this instance: option enable 1 option port 1194 option proto udp option dev tap0 option key /etc/easy-rsa/keys/server.key option dh /etc/easy-rsa/keys/dh1024.pem option ifconfig_pool_persist /tmp/ipp.txt option server_bridge "10.4.96.50 255.255.255.0 10.4.96.100 10.4.96.200" list push "redirect-gateway local def1" list push "dhcp-option DNS 10.4.96.14" option duplicate_cn 1 option comp_lzo 1 option max_clients 100 option log /tmp/openvpn.log option verb 3 CLIENT CONFIG FILE: config 'openvpn' 'sample_client' option 'enable' '1' option 'client' '1' option 'dev' 'tap' option 'proto' 'udp' list 'remote' '10.4.96.50 1194' option 'status' /tmp/openvpn-status.log option 'log' /tmp/openvpn.log option 'ca' '/etc/easy-rsa/keys/ca.crt' option 'cert' '/etc/easy-rsa/keys/client.crt' option 'key' '/etc/easy-rsa/keys/client.key' option 'comp_lzo' '1' option 'verb' '5' Thanks in advance,

  Read the article

• Monit won't restart process

  - by bresc

  I just don't get it. monit behaves very strangely... check process thin with pidfile /var/run/thin.4567.pid start program = "/srv/Pusher/server start" stop program = "/srv/Pusher/server stop" if failed host 127.0.0.1 port 4567 protocol http then restart group server this is the process that should be restarted. So I tested monit and stopped the process. But it is showing only this: Process 'thin' status Does not exist monitoring status monitored data collected Wed Mar 24 01:18:55 2010 when I run "monit validate" it starts the service. Am I missing something? Thx

  Read the article

• Automated Deployment of Windows Application

  - by Phillip Roux

  Our development team are looking to automate our application deployment on to multiple servers. We need to control multiple windows servers at once (Stopping Database server & Web Server). We have a ASP.NET project, database upgrade scripts, reports and various Windows services that potentially need to be updated during deployment. Currently we use Jenkins as our CI server to run our unit tests. If something goes wrong in the deployment process, we would like the ability to roll back. What tools are recommended to automate our deployment process?

  Read the article

• amanda backup problem

  - by hossam alkhalili

  hello, i installed amanda on centos 5.5 to backup windows 7 and windows server 2008 over network and i used 15 minutes instillation guide but when i type amcheck DailySet1 i got request failed then if i type amservice when i amandabackup account to define the problem i got Permission denied and on root account i got OPTIONS features=ff7fffff9cfeffffd3cf1300; i use zwc on windows 7 as an agent can anyone help me thanks -sh-3.2$ amcheck DailySet1 Amanda Tape Server Host Check Holding disk /dumps/amanda: 1791315968 KB disk space available, using 1791213568 KB slot 1: volume 'DailySet1-01' Will write to volume 'DailySet1-01' in slot 1. NOTE: skipping tape-writable test NOTE: conf info dir /etc/amanda/DailySet1/curinfo does not exist NOTE: it will be created on the next run. NOTE: index dir /etc/amanda/DailySet1/index does not exist NOTE: it will be created on the next run. Server check took 0.880 seconds Amanda Backup Client Hosts Check WARNING: jrcbs01.jrc.local: selfcheck request failed: Connection refused Client check: 1 host checked in 10.020 seconds. 1 problem found. amservice 192.168.1.1 bsdtcp noop [root@jrcbs01 ~]# amservice 192.168.1.5 bsdtcp noop

  Read the article

• amanda backup problem

  - by hossam alkhalili

  hello, i installed amanda on centos 5.5 to backup windows 7 and windows server 2008 over network and i used 15 minutes instillation guide but when i type amcheck DailySet1 i got request failed then if i type amservice when i amandabackup account to define the problem i got Permission denied and on root account i got OPTIONS features=ff7fffff9cfeffffd3cf1300; i use zwc on windows 7 as an agent can anyone help me thanks -sh-3.2$ amcheck DailySet1 Amanda Tape Server Host Check Holding disk /dumps/amanda: 1791315968 KB disk space available, using 1791213568 KB slot 1: volume 'DailySet1-01' Will write to volume 'DailySet1-01' in slot 1. NOTE: skipping tape-writable test NOTE: conf info dir /etc/amanda/DailySet1/curinfo does not exist NOTE: it will be created on the next run. NOTE: index dir /etc/amanda/DailySet1/index does not exist NOTE: it will be created on the next run. Server check took 0.880 seconds Amanda Backup Client Hosts Check WARNING: jrcbs01.jrc.local: selfcheck request failed: Connection refused Client check: 1 host checked in 10.020 seconds. 1 problem found. amservice 192.168.1.1 bsdtcp noop [root@jrcbs01 ~]# amservice 192.168.1.5 bsdtcp noop

  Read the article

• JMeter Stress testing

  - by mcondiff

  MAMP server hosting a Joomla instance. I'd like to hear the community's thoughts on the best way to stress test the server and find it's breaking point on concurrent users etc. Currently I have setup a test plan which I have going to the home page, grabbing the index.php, css, js and all images and have run tests on 1 to 100 users and a varying number of loops. What I'd like to know is how do I determine at what number of concurrent requests or looping requests is a good way to gauge if my server can handle the proposed increase in traffic? What is a good KB/sec, Throughput, Average, Max, Min via the Aggregate Report and at what number of threads/loops etc? I have googled and have not found immediate answers to these questions and thought to come here. More or less I have just used this http://jakarta.apache.org/jmeter/usermanual/jmeter_proxy_step_by_step.pdf to guide me and then I have been winging it in terms of Thread and Loop numbers. Any light shed on these subject would be much appreciated.

  Read the article

< Previous Page | 1158 1159 1160 1161 1162 1163 1164 1165 1166 1167 1168 1169  | Next Page >