device control - Page 1168

Cisco 881 losing NAT NVI translation config after reload

- by MasterRoot24

This is a weird one, so I'll try to explain in as much detail as I can so I'm giving the whole picture. As I've mentioned in my other questions, I'm in the process of setting up a new Cisco 881 as my WAN router and NAT firewall. I'm facing an issue where NAT NVI rules that I have configured are not enabled after a reload of the router, regardless of the fact that they are present in the startup-config. In order to clarify this a little, here's the relevant section of my current running-config: Router1#show running-config | include nat source ip nat source list 1 interface FastEthernet4 overload ip nat source list 2 interface FastEthernet4 overload ip nat source static tcp 192.168.1.x 1723 interface FastEthernet4 1723 ip nat source static tcp 192.168.1.x 80 interface FastEthernet4 80 ip nat source static tcp 192.168.1.x 443 interface FastEthernet4 443 ip nat source static tcp 192.168.1.x 25 interface FastEthernet4 25 ip nat source static tcp 192.168.1.x 587 interface FastEthernet4 587 ip nat source static tcp 192.168.1.x 143 interface FastEthernet4 143 ip nat source static tcp 192.168.1.x 993 interface FastEthernet4 993 ...and here's the mappings 'in action': Router1#show ip nat nvi translations | include --- tcp <WAN IP>:25 192.168.1.x:25 --- --- tcp <WAN IP>:80 192.168.1.x:80 --- --- tcp <WAN IP>:143 192.168.1.x:143 --- --- tcp <WAN IP>:443 192.168.1.x:443 --- --- tcp <WAN IP>:587 192.168.1.x:587 --- --- tcp <WAN IP>:993 192.168.1.x:993 --- --- tcp <WAN IP>:1723 192.168.1.x:1723 --- --- ...and here's proof that the mappings are saved to startup-config: Router1#show startup-config | include nat source ip nat source list 1 interface FastEthernet4 overload ip nat source list 2 interface FastEthernet4 overload ip nat source static tcp 192.168.1.x 1723 interface FastEthernet4 1723 ip nat source static tcp 192.168.1.x 80 interface FastEthernet4 80 ip nat source static tcp 192.168.1.x 443 interface FastEthernet4 443 ip nat source static tcp 192.168.1.x 25 interface FastEthernet4 25 ip nat source static tcp 192.168.1.x 587 interface FastEthernet4 587 ip nat source static tcp 192.168.1.x 143 interface FastEthernet4 143 ip nat source static tcp 192.168.1.x 993 interface FastEthernet4 993 However, look what happens after a reload of the router: Router1#reload Proceed with reload? [confirm]Connection to router closed by remote host. Connection to router closed. $ ssh joe@router Password: Authorized Access only Router1>en Password: Router1#show ip nat nvi translations | include --- Router1# Router1#show ip nat translations | include --- tcp 188.222.181.173:25 192.168.1.2:25 --- --- tcp 188.222.181.173:80 192.168.1.2:80 --- --- tcp 188.222.181.173:143 192.168.1.2:143 --- --- tcp 188.222.181.173:443 192.168.1.2:443 --- --- tcp 188.222.181.173:587 192.168.1.2:587 --- --- tcp 188.222.181.173:993 192.168.1.2:993 --- --- tcp 188.222.181.173:1723 192.168.1.2:1723 --- --- Router1# Here's proof that the running config should have the mappings setup as NVI: Router1#show running-config | include nat source ip nat source list 1 interface FastEthernet4 overload ip nat source list 2 interface FastEthernet4 overload ip nat source static tcp 192.168.1.2 1723 interface FastEthernet4 1723 ip nat source static tcp 192.168.1.2 80 interface FastEthernet4 80 ip nat source static tcp 192.168.1.2 443 interface FastEthernet4 443 ip nat source static tcp 192.168.1.2 25 interface FastEthernet4 25 ip nat source static tcp 192.168.1.2 587 interface FastEthernet4 587 ip nat source static tcp 192.168.1.2 143 interface FastEthernet4 143 ip nat source static tcp 192.168.1.2 993 interface FastEthernet4 993 At this point, the mappings are not working (inbound connections from WAN on the HTTP/IMAP fail). I presume that this is because my interfaces are using ip nat enable for use with NVI mappings, instead of ip nat inside/outside. So, I re-apply the mappings: Router1#configure ter Router1#configure terminal Enter configuration commands, one per line. End with CNTL/Z. Router1(config)#ip nat source static tcp 192.168.1.2 1723 interface FastEthernet4 1723 Router1(config)#ip nat source static tcp 192.168.1.2 80 interface FastEthernet4 80 Router1(config)#ip nat source static tcp 192.168.1.2 443 interface FastEthernet4 443 Router1(config)#ip nat source static tcp 192.168.1.2 25 interface FastEthernet4 25 Router1(config)#ip nat source static tcp 192.168.1.2 587 interface FastEthernet4 587 Router1(config)#ip nat source static tcp 192.168.1.2 143 interface FastEthernet4 143 Router1(config)#ip nat source static tcp 192.168.1.2 993 interface FastEthernet4 993 Router1(config)#end ... then they show up correctly: Router1#show ip nat nvi translations | include --- tcp 188.222.181.173:25 192.168.1.2:25 --- --- tcp 188.222.181.173:80 192.168.1.2:80 --- --- tcp 188.222.181.173:143 192.168.1.2:143 --- --- tcp 188.222.181.173:443 192.168.1.2:443 --- --- tcp 188.222.181.173:587 192.168.1.2:587 --- --- tcp 188.222.181.173:993 192.168.1.2:993 --- --- tcp 188.222.181.173:1723 192.168.1.2:1723 --- --- Router1# Router1#show ip nat translations | include --- Router1# ... furthermore, now from both WAN and LAN, the services mapped above now work until the next reload. All of the above is required every time I have to reload the router (which is all too often at the moment :-( ). Here's my full current config: ! ! Last configuration change at 20:20:15 UTC Tue Dec 11 2012 by xxx version 15.2 no service pad service timestamps debug datetime msec service timestamps log datetime msec service password-encryption ! hostname xxx ! boot-start-marker boot-end-marker ! ! enable secret 4 xxxx ! aaa new-model ! ! aaa authentication login local_auth local ! ! ! ! ! aaa session-id common ! memory-size iomem 10 ! crypto pki trustpoint TP-self-signed-xxx enrollment selfsigned subject-name cn=IOS-Self-Signed-Certificate-xxx revocation-check none rsakeypair TP-self-signed-xxx ! ! crypto pki certificate chain TP-self-signed-xxx certificate self-signed 01 xxx quit ip gratuitous-arps ip auth-proxy max-login-attempts 5 ip admission max-login-attempts 5 ! ! ! ! ! ip domain list dmz.xxx.local ip domain list xxx.local ip domain name dmz.xxx.local ip name-server 192.168.1.x ip cef login block-for 3 attempts 3 within 3 no ipv6 cef ! ! multilink bundle-name authenticated license udi pid CISCO881-SEC-K9 sn xxx ! ! username admin privilege 15 secret 4 xxx username joe secret 4 xxx ! ! ! ! ! ip ssh time-out 60 ! ! ! ! ! ! ! ! ! interface FastEthernet0 no ip address ! interface FastEthernet1 no ip address ! interface FastEthernet2 no ip address ! interface FastEthernet3 switchport access vlan 2 no ip address ! interface FastEthernet4 ip address dhcp ip access-group 101 in ip nat enable duplex auto speed auto ! interface Vlan1 ip address 192.168.1.x 255.255.255.0 no ip redirects no ip unreachables no ip proxy-arp ip nat enable ! interface Vlan2 ip address 192.168.0.x 255.255.255.0 ! ip forward-protocol nd ip http server ip http access-class 1 ip http authentication local ip http secure-server ! ! ip nat source list 1 interface FastEthernet4 overload ip nat source list 2 interface FastEthernet4 overload ip nat source static tcp 192.168.1.x 1723 interface FastEthernet4 1723 ! ! access-list 1 permit 192.168.0.0 0.0.0.255 access-list 2 permit 192.168.1.0 0.0.0.255 access-list 101 permit udp 193.x.x.0 0.0.0.255 any eq 5060 access-list 101 deny udp any any eq 5060 access-list 101 permit ip any any ! ! ! ! control-plane ! ! banner motd Authorized Access only ! line con 0 exec-timeout 15 0 login authentication local_auth line aux 0 exec-timeout 15 0 login authentication local_auth line vty 0 4 access-class 2 in login authentication local_auth length 0 transport input all ! ! end I'd appreciate it greatly if anyone can help me find out why these mappings are not setup correctly using the saved config after a reload.

Read the article

Error when reloading supervisord: unix:///tmp/supervisor.sock no such file

- by Yarin

I'm running supervisord on my CentOS 6 box like so, /usr/bin/supervisord -c /etc/supervisord.conf and when I launch supervisorctl all process status are fine, but if I try to reload using supervisorctl I get unix:///tmp/supervisor.sock no such file I'm using the same config file I've used successfully on other boxes, and im running everything as root. I can't undesrtand what the problem is... Config file: ; Sample supervisor config file. [unix_http_server] file=/tmp/supervisor.sock ; (the path to the socket file) ;chmod=0700 ; socket file mode (default 0700) ;chown=nobody:nogroup ; socket file uid:gid owner ;username=user ; (default is no username (open server)) ;password=123 ; (default is no password (open server)) ;[inet_http_server] ; inet (TCP) server disabled by default ;port=127.0.0.1:9001 ; (ip_address:port specifier, *:port for all iface) ;username=user ; (default is no username (open server)) ;password=123 ; (default is no password (open server)) [supervisord] logfile=/tmp/supervisord.log ; (main log file;default $CWD/supervisord.log) logfile_maxbytes=50MB ; (max main logfile bytes b4 rotation;default 50MB) logfile_backups=10 ; (num of main logfile rotation backups;default 10) loglevel=info ; (log level;default info; others: debug,warn,trace) pidfile=/tmp/supervisord.pid ; (supervisord pidfile;default supervisord.pid) nodaemon=false ; (start in foreground if true;default false) minfds=1024 ; (min. avail startup file descriptors;default 1024) minprocs=200 ; (min. avail process descriptors;default 200) ;umask=022 ; (process file creation umask;default 022) ;user=chrism ; (default is current user, required if root) ;identifier=supervisor ; (supervisord identifier, default is 'supervisor') ;directory=/tmp ; (default is not to cd during start) ;nocleanup=true ; (don't clean up tempfiles at start;default false) ;childlogdir=/tmp ; ('AUTO' child log dir, default $TEMP) ;environment=KEY=value ; (key value pairs to add to environment) ;strip_ansi=false ; (strip ansi escape codes in logs; def. false) ; the below section must remain in the config file for RPC ; (supervisorctl/web interface) to work, additional interfaces may be ; added by defining them in separate rpcinterface: sections [rpcinterface:supervisor] supervisor.rpcinterface_factory = supervisor.rpcinterface:make_main_rpcinterface [supervisorctl] serverurl=unix:///tmp/supervisor.sock ; use a unix:// URL for a unix socket ;serverurl=http://127.0.0.1:9001 ; use an http:// url to specify an inet socket ;username=chris ; should be same as http_username if set ;password=123 ; should be same as http_password if set ;prompt=mysupervisor ; cmd line prompt (default "supervisor") ;history_file=~/.sc_history ; use readline history if available ; The below sample program section shows all possible program subsection values, ; create one or more 'real' program: sections to be able to control them under ; supervisor. ;[program:foo] ;command=/bin/cat [program:embed_scheduler] command=/opt/web-apps/mywebsite/custom_process.py process_name=%(program_name)s_%(process_num)d numprocs=3 ;[program:theprogramname] ;command=/bin/cat ; the program (relative uses PATH, can take args) ;process_name=%(program_name)s ; process_name expr (default %(program_name)s) ;numprocs=1 ; number of processes copies to start (def 1) ;directory=/tmp ; directory to cwd to before exec (def no cwd) ;umask=022 ; umask for process (default None) ;priority=999 ; the relative start priority (default 999) ;autostart=true ; start at supervisord start (default: true) ;autorestart=unexpected ; whether/when to restart (default: unexpected) ;startsecs=1 ; number of secs prog must stay running (def. 1) ;startretries=3 ; max # of serial start failures (default 3) ;exitcodes=0,2 ; 'expected' exit codes for process (default 0,2) ;stopsignal=QUIT ; signal used to kill process (default TERM) ;stopwaitsecs=10 ; max num secs to wait b4 SIGKILL (default 10) ;killasgroup=false ; SIGKILL the UNIX process group (def false) ;user=chrism ; setuid to this UNIX account to run the program ;redirect_stderr=true ; redirect proc stderr to stdout (default false) ;stdout_logfile=/a/path ; stdout log path, NONE for none; default AUTO ;stdout_logfile_maxbytes=1MB ; max # logfile bytes b4 rotation (default 50MB) ;stdout_logfile_backups=10 ; # of stdout logfile backups (default 10) ;stdout_capture_maxbytes=1MB ; number of bytes in 'capturemode' (default 0) ;stdout_events_enabled=false ; emit events on stdout writes (default false) ;stderr_logfile=/a/path ; stderr log path, NONE for none; default AUTO ;stderr_logfile_maxbytes=1MB ; max # logfile bytes b4 rotation (default 50MB) ;stderr_logfile_backups=10 ; # of stderr logfile backups (default 10) ;stderr_capture_maxbytes=1MB ; number of bytes in 'capturemode' (default 0) ;stderr_events_enabled=false ; emit events on stderr writes (default false) ;environment=A=1,B=2 ; process environment additions (def no adds) ;serverurl=AUTO ; override serverurl computation (childutils) ; The below sample eventlistener section shows all possible ; eventlistener subsection values, create one or more 'real' ; eventlistener: sections to be able to handle event notifications ; sent by supervisor. ;[eventlistener:theeventlistenername] ;command=/bin/eventlistener ; the program (relative uses PATH, can take args) ;process_name=%(program_name)s ; process_name expr (default %(program_name)s) ;numprocs=1 ; number of processes copies to start (def 1) ;events=EVENT ; event notif. types to subscribe to (req'd) ;buffer_size=10 ; event buffer queue size (default 10) ;directory=/tmp ; directory to cwd to before exec (def no cwd) ;umask=022 ; umask for process (default None) ;priority=-1 ; the relative start priority (default -1) ;autostart=true ; start at supervisord start (default: true) ;autorestart=unexpected ; whether/when to restart (default: unexpected) ;startsecs=1 ; number of secs prog must stay running (def. 1) ;startretries=3 ; max # of serial start failures (default 3) ;exitcodes=0,2 ; 'expected' exit codes for process (default 0,2) ;stopsignal=QUIT ; signal used to kill process (default TERM) ;stopwaitsecs=10 ; max num secs to wait b4 SIGKILL (default 10) ;killasgroup=false ; SIGKILL the UNIX process group (def false) ;user=chrism ; setuid to this UNIX account to run the program ;redirect_stderr=true ; redirect proc stderr to stdout (default false) ;stdout_logfile=/a/path ; stdout log path, NONE for none; default AUTO ;stdout_logfile_maxbytes=1MB ; max # logfile bytes b4 rotation (default 50MB) ;stdout_logfile_backups=10 ; # of stdout logfile backups (default 10) ;stdout_events_enabled=false ; emit events on stdout writes (default false) ;stderr_logfile=/a/path ; stderr log path, NONE for none; default AUTO ;stderr_logfile_maxbytes=1MB ; max # logfile bytes b4 rotation (default 50MB) ;stderr_logfile_backups ; # of stderr logfile backups (default 10) ;stderr_events_enabled=false ; emit events on stderr writes (default false) ;environment=A=1,B=2 ; process environment additions ;serverurl=AUTO ; override serverurl computation (childutils) ; The below sample group section shows all possible group values, ; create one or more 'real' group: sections to create "heterogeneous" ; process groups. ;[group:thegroupname] ;programs=progname1,progname2 ; each refers to 'x' in [program:x] definitions ;priority=999 ; the relative start priority (default 999) ; The [include] section can just contain the "files" setting. This ; setting can list multiple files (separated by whitespace or ; newlines). It can also contain wildcards. The filenames are ; interpreted as relative to this file. Included files *cannot* ; include files themselves. ;[include] ;files = relative/directory/*.ini

Read the article

socket connection failed, telnet OK

- by cf16

my problem is that I can't connect two comps through socket (windows xp and windows7) although the server created with socket is listening and I can telnet it. It receives then information and does what should be done, but if I run the corresponding socket client I get error 10061. Moreover I am behind firewall - these two comps are running within my LAN, the windows firewalls are turned off, comp1: 192.168.1.2 port 12345 comp1: 192.168.1.6 port 12345 router: 192.168.1.1 Maybe port forwarding could help? But most important for me is to answer why Sockets fail if telnet works fine. client: int main(){ // Initialize Winsock. WSADATA wsaData; int iResult = WSAStartup(MAKEWORD(2,2), &wsaData); if (iResult != NO_ERROR) printf("Client: Error at WSAStartup().\n"); else printf("Client: WSAStartup() is OK.\n"); // Create a socket. SOCKET m_socket; m_socket = socket(AF_INET, SOCK_STREAM, IPPROTO_TCP); if (m_socket == INVALID_SOCKET){ printf("Client: socket() - Error at socket(): %ld\n", WSAGetLastError()); WSACleanup(); return 7; }else printf("Client: socket() is OK.\n"); // Connect to a server. sockaddr_in clientService; clientService.sin_family = AF_INET; //clientService.sin_addr.s_addr = inet_addr("77.64.240.156"); clientService.sin_addr.s_addr = inet_addr("192.168.1.5"); //clientService.sin_addr.s_addr = inet_addr("87.207.222.5"); clientService.sin_port = htons(12345); if (connect(m_socket, (SOCKADDR*)&clientService, sizeof(clientService)) == SOCKET_ERROR){ printf("Client: connect() - Failed to connect.\n"); wprintf(L"connect function failed with error: %ld\n", WSAGetLastError()); iResult = closesocket(m_socket); if (iResult == SOCKET_ERROR) wprintf(L"closesocket function failed with error: %ld\n", WSAGetLastError()); WSACleanup(); return 6; } // Send and receive data int bytesSent; int bytesRecv = SOCKET_ERROR; // Be careful with the array bound, provide some checking mechanism char sendbuf[200] = "Client: Sending some test string to server..."; char recvbuf[200] = ""; bytesSent = send(m_socket, sendbuf, strlen(sendbuf), 0); printf("Client: send() - Bytes Sent: %ld\n", bytesSent); while(bytesRecv == SOCKET_ERROR){ bytesRecv = recv(m_socket, recvbuf, 32, 0); if (bytesRecv == 0 || bytesRecv == WSAECONNRESET){ printf("Client: Connection Closed.\n"); break; }else printf("Client: recv() is OK.\n"); if (bytesRecv < 0) return 0; else printf("Client: Bytes received - %ld.\n", bytesRecv); } system("pause"); return 0; } server: int main(){ WORD wVersionRequested; WSADATA wsaData={0}; int wsaerr; // Using MAKEWORD macro, Winsock version request 2.2 wVersionRequested = MAKEWORD(2, 2); wsaerr = WSAStartup(wVersionRequested, &wsaData); if (wsaerr != 0){ /* Tell the user that we could not find a usable WinSock DLL.*/ printf("Server: The Winsock dll not found!\n"); return 0; }else{ printf("Server: The Winsock dll found!\n"); printf("Server: The status: %s.\n", wsaData.szSystemStatus); } /* Confirm that the WinSock DLL supports 2.2.*/ /* Note that if the DLL supports versions greater */ /* than 2.2 in addition to 2.2, it will still return */ /* 2.2 in wVersion since that is the version we */ /* requested. */ if (LOBYTE(wsaData.wVersion) != 2 || HIBYTE(wsaData.wVersion) != 2 ){ /* Tell the user that we could not find a usable WinSock DLL.*/ printf("Server: The dll do not support the Winsock version %u.%u!\n", LOBYTE(wsaData.wVersion), HIBYTE(wsaData.wVersion)); WSACleanup(); return 0; }else{ printf("Server: The dll supports the Winsock version %u.%u!\n", LOBYTE(wsaData.wVersion), HIBYTE(wsaData.wVersion)); printf("Server: The highest version this dll can support: %u.%u\n", LOBYTE(wsaData.wHighVersion), HIBYTE(wsaData.wHighVersion)); } //////////Create a socket//////////////////////// //Create a SOCKET object called m_socket. SOCKET m_socket; // Call the socket function and return its value to the m_socket variable. // For this application, use the Internet address family, streaming sockets, and the TCP/IP protocol. // using AF_INET family, TCP socket type and protocol of the AF_INET - IPv4 m_socket = socket(AF_INET, SOCK_STREAM, IPPROTO_TCP); // Check for errors to ensure that the socket is a valid socket. if (m_socket == INVALID_SOCKET){ printf("Server: Error at socket(): %ld\n", WSAGetLastError()); WSACleanup(); //return 0; }else{ printf("Server: socket() is OK!\n"); } ////////////////bind////////////////////////////// // Create a sockaddr_in object and set its values. sockaddr_in service; // AF_INET is the Internet address family. service.sin_family = AF_INET; // "127.0.0.1" is the local IP address to which the socket will be bound. service.sin_addr.s_addr = htons(INADDR_ANY);//inet_addr("127.0.0.1");//htons(INADDR_ANY); //inet_addr("192.168.1.2"); // 55555 is the port number to which the socket will be bound. // using the htons for big-endian service.sin_port = htons(12345); // Call the bind function, passing the created socket and the sockaddr_in structure as parameters. // Check for general errors. if (bind(m_socket, (SOCKADDR*)&service, sizeof(service)) == SOCKET_ERROR){ printf("Server: bind() failed: %ld.\n", WSAGetLastError()); closesocket(m_socket); //return 0; }else{ printf("Server: bind() is OK!\n"); } // Call the listen function, passing the created socket and the maximum number of allowed // connections to accept as parameters. Check for general errors. if (listen(m_socket, 1) == SOCKET_ERROR) printf("Server: listen(): Error listening on socket %ld.\n", WSAGetLastError()); else{ printf("Server: listen() is OK, I'm waiting for connections...\n"); } // Create a temporary SOCKET object called AcceptSocket for accepting connections. SOCKET AcceptSocket; // Create a continuous loop that checks for connections requests. If a connection // request occurs, call the accept function to handle the request. printf("Server: Waiting for a client to connect...\n"); printf("***Hint: Server is ready...run your client program...***\n"); // Do some verification... while (1){ AcceptSocket = SOCKET_ERROR; while (AcceptSocket == SOCKET_ERROR){ AcceptSocket = accept(m_socket, NULL, NULL); } // else, accept the connection... note: now it is wrong implementation !!!!!!!! !! !! (only 1 char) // When the client connection has been accepted, transfer control from the // temporary socket to the original socket and stop checking for new connections. printf("Server: Client Connected! Mammamija. \n"); m_socket = AcceptSocket; char recvBuf[200]=""; char * rc=recvBuf; int bytesRecv=recv(m_socket,recvBuf,64,0); if(bytesRecv==0 || bytesRecv==WSAECONNRESET){ cout<<"server: connection closed.\n"; }else{ cout<<"server: recv() is OK.\n"; if(bytesRecv<0){ return 0; }else{ printf("server: bytes received: %ld.\n",recvBuf); } }

Read the article

Unable to ping local machines by name in Windows 7

- by aardvarkk

I'm having a strange (and persistent!) problem with pinging local machines on my network by name. I believe my machine (Windows 7 64-bit) is the only one having this issue. This is over a wireless connection. As an example, consider a device on my network by the name of WDTVLiveHub. It's a Western Digital Live Hub (surprise!). If I go to my router's DHCP Client Table in the browser (my router is a WRT400N), I see this entry: WDTVLiveHub 192.168.1.101 Great. So I try to ping that IP address: ping 192.168.1.101 Pinging 192.168.1.101 with 32 bytes of data: Reply from 192.168.1.101: bytes=32 time=9ms TTL=64 Reply from 192.168.1.101: bytes=32 time=16ms TTL=64 Reply from 192.168.1.101: bytes=32 time=16ms TTL=64 Reply from 192.168.1.101: bytes=32 time=16ms TTL=64 Ping statistics for 192.168.1.101: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 9ms, Maximum = 16ms, Average = 14ms OK, still looking good. Now I try to ping it by name: ping WDTVLiveHub Ping request could not find host WDTVLiveHub. Please check the name and try again. From what I've read, this implies a problem with DNS servers and host name lookups. Interestingly, if I type the following: pathping 192.168.1.101 I get this output: Tracing route to WDTVLIVEHUB [192.168.1.101] over a maximum of 30 hops: 0 Scotty [192.168.1.103] 1 WDTVLIVEHUB [192.168.1.101] Computing statistics for 25 seconds... Source to Here This Node/Link Hop RTT Lost/Sent = Pct Lost/Sent = Pct Address 0 Scotty [192.168.1.103] 1/ 100 = 1% | 1 12ms 1/ 100 = 1% 0/ 100 = 0% WDTVLIVEHUB [192.168.1.101] Trace complete. Scotty is obviously the name of my local machine. So it's able to find the name somehow when I do that approach... ipconfig /all shows the following under DNS servers: DNS Servers . . . . . . . . . . . : 192.168.1.1 ***.***.***.*** ***.***.***.*** Where the * represents the same DNS servers that show up in my router under DNS 1 and DNS 2 through the Internet. For completeness, here's the whole output of ipconfig /all: Windows IP Configuration Host Name . . . . . . . . . . . . : Scotty Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Peer-Peer IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No Wireless LAN adapter Wireless Network Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Dell Wireless 1397 WLAN Mini-Card Physical Address. . . . . . . . . : 0C-EE-E6-D1-07-E8 DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IPv6 Address. . . . . . . . . . . : 2002:d83a:31e5:1234:5592:398e:8968:43d1(Preferred) Temporary IPv6 Address. . . . . . : 2002:d83a:31e5:1234:ecce:2f79:72a5:5273(Preferred) Link-local IPv6 Address . . . . . : fe80::5592:398e:8968:43d1%26(Preferred) IPv4 Address. . . . . . . . . . . : 192.168.1.103(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Lease Obtained. . . . . . . . . . : September-17-12 11:05:57 PM Lease Expires . . . . . . . . . . : September-18-12 11:05:57 PM Default Gateway . . . . . . . . . : fe80::200:ff:fe00:0%26 192.168.1.1 DHCP Server . . . . . . . . . . . : 192.168.1.1 DHCPv6 IAID . . . . . . . . . . . : 537718502 DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-12-80-3D-D7-00-26-B9-0D-08-70 DNS Servers . . . . . . . . . . . : 192.168.1.1 ***.***.***.*** ***.***.***.*** NetBIOS over Tcpip. . . . . . . . : Enabled Ethernet adapter VirtualBox Host-Only Network: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : VirtualBox Host-Only Ethernet Adapter Physical Address. . . . . . . . . : 08-00-27-00-98-9A DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes Link-local IPv6 Address . . . . . : fe80::b48a:916b:c0f:fb29%23(Preferred) Autoconfiguration IPv4 Address. . : 169.254.251.41(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.0.0 Default Gateway . . . . . . . . . : DHCPv6 IAID . . . . . . . . . . . : 570949671 DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-12-80-3D-D7-00-26-B9-0D-08-70 DNS Servers . . . . . . . . . . . : fec0:0:0:ffff::1%1 fec0:0:0:ffff::2%1 fec0:0:0:ffff::3%1 NetBIOS over Tcpip. . . . . . . . : Enabled Tunnel adapter Local Area Connection* 15: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0 DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes Tunnel adapter isatap.{55899375-C31D-4173-A529-4427D63FD28B}: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Microsoft ISATAP Adapter #2 Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0 DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes Tunnel adapter isatap.{64B8F35F-A6AB-4D6B-B1D5-DD95F57B1458}: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Microsoft ISATAP Adapter #3 Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0 DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes Not sure exactly how to diagnose exactly what's going on... but the problem is really frustrating! The biggest problem is that my mapped network drives have to be done by IP, and then any time the router assigns new IP addresses to those devices, all of my network shares break again. Stinks! Would love some assistance on possible solutions. I've tried all of this netsh catalog resetting and that didn't seem to fix anything at all. Would love an explanation of what's going wrong, too, rather than blindly resetting things! Thanks!

Read the article

IIS Strategies for Accessing Secured Network Resources

- by ErikE

Problem: A user connects to a service on a machine, such as an IIS web site or a SQL Server database. The site or the database need to gain access to network resources such as file shares (the most common) or a database on a different server. Permission is denied. This is because the user the service is running under doesn't have network permissions in the first place, or if it does, it doesn't have rights to access the remote resource. I keep running into this problem over and over again and am tired of not having a really solid way of handling it. Here are some workarounds I'm aware of: Run IIS as a custom-created domain user who is granted high permissions If permissions are granted one file share at a time, then every time I want to read from a new share, I would have to ask a network admin to add it for me. Eventually, with many web sites reading from many shares, it is going to get really complicated. If permissions are just opened up wide for the user to access any file shares in our domain, then this seems like an unnecessary security surface area to present. This also applies to all the sites running on IIS, rather than just the selected site or virtual directory that needs the access, a further surface area problem. Still use the IUSR account but give it network permissions and set up the same user name on the remote resource (not a domain user, a local user) This also has its problems. For example, there's a file share I am using that I have full rights to for sharing, but I can't log in to the machine. So I have to find the right admin and ask him to do it for me. Any time something has to change, it's another request to an admin. Allow IIS users to connect as anonymous, but set the account used for anonymous access to a high-privilege one This is even worse than giving the IIS IUSR full privileges, because it means my web site can't use any kind of security in the first place. Connect using Kerberos, then delegate This sounds good in principle but has all sorts of problems. First of all, if you're using virtual web sites where the domain name you connect to the site with is not the base machine name (as we do frequently), then you have to set up a Service Principal Name on the webserver using Microsoft's SetSPN utility. It's complicated and apparently prone to errors. Also, you have to ask your network/domain admin to change security policy for both the web server and the domain account so they are "trusted for delegation." If you don't get everything perfectly right, suddenly your intended Kerberos authentication is NTLM instead, and you can only impersonate rather than delegate, and thus no reaching out over the network as the user. Also, this method can be problematic because sometimes you need the web site or database to have permissions that the connecting user doesn't have. Create a service or COM+ application that fetches the resource for the web site Services and COM+ packages are run with their own set of credentials. Running as a high-privilege user is okay since they can do their own security and deny requests that are not legitimate, putting control in the hands of the application developer instead of the network admin. Problems: I am using a COM+ package that does exactly this on Windows Server 2000 to deliver highly sensitive images to a secured web application. I tried moving the web site to Windows Server 2003 and was suddenly denied permission to instantiate the COM+ object, very likely registry permissions. I trolled around quite a bit and did not solve the problem, partly because I was reluctant to give the IUSR account full registry permissions. That seems like the same bad practice as just running IIS as a high-privilege user. Note: This is actually really simple. In a programming language of your choice, you create a class with a function that returns an instance of the object you want (an ADODB.Connection, for example), and build a dll, which you register as a COM+ object. In your web server-side code, you create an instance of the class and use the function, and since it is running under a different security context, calls to network resources work. Map drive letters to shares This could theoretically work, but in my mind it's not really a good long-term strategy. Even though mappings can be created with specific credentials, and this can be done by others than a network admin, this also is going to mean that there are either way too many shared drives (small granularity) or too much permission is granted to entire file servers (large granularity). Also, I haven't figured out how to map a drive so that the IUSR gets the drives. Mapping a drive is for the current user, I don't know the IUSR account password to log in as it and create the mappings. Move the resources local to the web server/database There are times when I've done this, especially with Access databases. Does the database have to live out on the file share? Sometimes, it was just easiest to move the database to the web server or to the SQL database server (so the linked server to it would work). But I don't think this is a great all-around solution, either. And it won't work when the resource is a service rather than a file. Move the service to the final web server/database I suppose I could run a web server on my SQL Server database, so the web site can connect to it using impersonation and make me happy. But do we really want random extra web servers on our database servers just so this is possible? No. Virtual directories in IIS I know that virtual directories can help make remote resources look as though they are local, and this supports using custom credentials for each virtual directory. I haven't been able to come up with, yet, how this would solve the problem for system calls. Users could reach file shares directly, but this won't help, say, classic ASP code access resources. I could use a URL instead of a file path to read remote data files in a web page, but this isn't going to help me make a connection to an Access database, a SQL server database, or any other resource that uses a connection library rather than being able to just read all the bytes and work with them. I wish there was some kind of "service tunnel" that I could create. Think about how a VPN makes remote resources look like they are local. With a richer aliasing mechanism, perhaps code-based, why couldn't even database connections occur under a defined security context? Why not a special Windows component that lets you specify, per user, what resources are available and what alternate credentials are used for the connection? File shares, databases, web sites, you name it. I guess I'm almost talking about a specialized local proxy server. Anyway, so there's my list. I may update it if I think of more. Does anyone have any ideas for me? My current problem today is, yet again, I need a web site to connect to an Access database on a file share. Here we go again...

Read the article

Unable to receive any emails using postfix, dovecot, mysql, and virtual domain/mailboxes

- by stkdev248

I have been working on configuring my mail server for the last couple of weeks using postfix, dovecot, and mysql. I have one virtual domain and a few virtual mailboxes. Using squirrelmail I have been able to log into my accounts and send emails out (e.g. I can send to googlemail just fine), however I am not able to receive any emails--not from the outside world nor from within my own network. I am able to telnet in using localhost, my private ip, and my public ip on port 25 without any problems (I've tried it from the server itself and from another computer on my network). This is what I get in my logs when I send an email from my googlemail account to my mail server: mail.log Apr 14 07:36:06 server1 postfix/qmgr[1721]: BE01B520538: from=, size=733, nrcpt=1 (queue active) Apr 14 07:36:06 server1 postfix/pipe[3371]: 78BC0520510: to=, relay=dovecot, delay=45421, delays=45421/0/0/0.13, dsn=4.3.0, status=deferred (temporary failure. Command output: Can't open log file /var/log/mail-dovecot.log: Permission denied) Apr 14 07:36:06 server1 postfix/pipe[3391]: 8261B520534: to=, relay=dovecot, delay=38036, delays=38036/0.06/0/0.12, dsn=4.3.0, status=deferred (temporary failure. Command output: Can't open log file /var/log/mail-dovecot.log: Permission denied ) Apr 14 07:36:06 server1 postfix/pipe[3378]: 63927520532: to=, relay=dovecot, delay=38105, delays=38105/0.02/0/0.17, dsn=4.3.0, status=deferred (temporary failure. Command output: Can't open log file /var/log/mail-dovecot.log: Permission denied ) Apr 14 07:36:06 server1 postfix/pipe[3375]: 07F65520522: to=, relay=dovecot, delay=39467, delays=39467/0.01/0/0.17, dsn=4.3.0, status=deferred (temporary failure. Command output: Can't open log file /var/log/mail-dovecot.log: Permission denied ) Apr 14 07:36:06 server1 postfix/pipe[3381]: EEDE9520527: to=, relay=dovecot, delay=38361, delays=38360/0.04/0/0.15, dsn=4.3.0, status=deferred (temporary failure. Command output: Can't open log file /var/log/mail-dovecot.log: Permission denied ) Apr 14 07:36:06 server1 postfix/pipe[3379]: 67DFF520517: to=, relay=dovecot, delay=40475, delays=40475/0.03/0/0.16, dsn=4.3.0, status=deferred (temporary failure. Command output: Can't open log file /var/log/mail-dovecot.log: Permission denied ) Apr 14 07:36:06 server1 postfix/pipe[3387]: 3C7A052052E: to=, relay=dovecot, delay=38259, delays=38259/0.05/0/0.13, dsn=4.3.0, status=deferred (temporary failure. Command output: Can't open log file /var/log/mail-dovecot.log: Permission denied ) Apr 14 07:36:06 server1 postfix/pipe[3394]: BE01B520538: to=, relay=dovecot, delay=37682, delays=37682/0.07/0/0.11, dsn=4.3.0, status=deferred (temporary failure. Command output: Can't open log file /var/log/mail-dovecot.log: Permission denied ) Apr 14 07:36:07 server1 postfix/pipe[3384]: 3C7A052052E: to=, relay=dovecot, delay=38261, delays=38259/0.04/0/1.3, dsn=4.3.0, status=deferred (temporary failure. Command output: Can't open log file /var/log/mail-dovecot.log: Permission denied ) Apr 14 07:39:23 server1 postfix/anvil[3368]: statistics: max connection rate 1/60s for (smtp:209.85.213.169) at Apr 14 07:35:32 Apr 14 07:39:23 server1 postfix/anvil[3368]: statistics: max connection count 1 for (smtp:209.85.213.169) at Apr 14 07:35:32 Apr 14 07:39:23 server1 postfix/anvil[3368]: statistics: max cache size 1 at Apr 14 07:35:32 Apr 14 07:41:06 server1 postfix/qmgr[1721]: ED6005203B7: from=, size=1463, nrcpt=1 (queue active) Apr 14 07:41:06 server1 postfix/pipe[4594]: ED6005203B7: to=, relay=dovecot, delay=334, delays=334/0.01/0/0.13, dsn=4.3.0, status=deferred (temporary failure. Command output: Can't open log file /var/log/mail-dovecot.log: Permission denied ) Apr 14 07:51:06 server1 postfix/qmgr[1721]: ED6005203B7: from=, size=1463, nrcpt=1 (queue active) Apr 14 07:51:06 server1 postfix/pipe[4604]: ED6005203B7: to=, relay=dovecot, delay=933, delays=933/0.02/0/0.12, dsn=4.3.0, status=deferred (temporary failure. Command output: Can't open log file /var/log/mail-dovecot.log: Permission denied ) mail-dovecot-log (the log I set for debugging): Apr 14 07:28:26 auth: Info: mysql(127.0.0.1): Connected to database postfixadmin Apr 14 07:28:26 auth: Debug: sql([email protected],127.0.0.1): query: SELECT password FROM mailbox WHERE username = '[email protected]' Apr 14 07:28:26 auth: Debug: client out: OK 1 [email protected] Apr 14 07:28:26 auth: Debug: master in: REQUEST 1809973249 3356 1 7cfb822db820fc5da67d0776b107cb3f Apr 14 07:28:26 auth: Debug: sql([email protected],127.0.0.1): SELECT '/home/vmail/mydomain.com/some.user1' as home, 5000 AS uid, 5000 AS gid FROM mailbox WHERE username = '[email protected]' Apr 14 07:28:26 auth: Debug: master out: USER 1809973249 [email protected] home=/home/vmail/mydomain.com/some.user1 uid=5000 gid=5000 Apr 14 07:28:26 imap-login: Info: Login: user=, method=PLAIN, rip=127.0.0.1, lip=127.0.0.1, mpid=3360, secured Apr 14 07:28:26 imap([email protected]): Debug: Effective uid=5000, gid=5000, home=/home/vmail/mydomain.com/some.user1 Apr 14 07:28:26 imap([email protected]): Debug: maildir++: root=/home/vmail/mydomain.com/some.user1/Maildir, index=/home/vmail/mydomain.com/some.user1/Maildir/indexes, control=, inbox=/home/vmail/mydomain.com/some.user1/Maildir Apr 14 07:48:31 imap([email protected]): Info: Disconnected: Logged out bytes=85/681 From the output above I'm pretty sure that my problems all stem from (temporary failure. Command output: Can't open log file /var/log/mail-dovecot.log: Permission denied ), but I have no idea why I'm getting that error. I've have the permissions to that log set just like the other mail logs: root@server1:~# ls -l /var/log/mail* -rw-r----- 1 syslog adm 196653 2012-04-14 07:58 /var/log/mail-dovecot.log -rw-r----- 1 syslog adm 62778 2012-04-13 21:04 /var/log/mail.err -rw-r----- 1 syslog adm 497767 2012-04-14 08:01 /var/log/mail.log Does anyone have any idea what I may be doing wrong? Here are my main.cf and master.cf files: main.cf: # See /usr/share/postfix/main.cf.dist for a commented, more complete version # Debian specific: Specifying a file name will cause the first # line of that file to be used as the name. The Debian default # is /etc/mailname. #myorigin = /etc/mailname smtpd_banner = $myhostname ESMTP $mail_name (Ubuntu) biff = no # appending .domain is the MUA's job. append_dot_mydomain = no # Uncomment the next line to generate "delayed mail" warnings #delay_warning_time = 4h readme_directory = no # TLS parameters smtpd_tls_cert_file=/etc/ssl/certs/ssl-cert-snakeoil.pem smtpd_tls_key_file=/etc/ssl/private/ssl-cert-snakeoil.key smtpd_use_tls=yes smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache # See /usr/share/doc/postfix/TLS_README.gz in the postfix-doc package for # information on enabling SSL in the smtp client. myhostname = server1.mydomain.com alias_maps = hash:/etc/aliases alias_database = hash:/etc/aliases myorigin = /etc/mailname mydestination = relayhost = mynetworks = 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128 mailbox_command = procmail -a "$EXTENSION" mailbox_size_limit = 0 recipient_delimiter = + inet_interfaces = all # Virtual Configs virtual_uid_maps = static:5000 virtual_gid_maps = static:5000 virtual_mailbox_base = /home/vmail virtual_mailbox_domains = mysql:/etc/postfix/mysql_virtual_mailbox_domains.cf virtual_mailbox_maps = mysql:/etc/postfix/mysql_virtual_mailbox_maps.cf virtual_alias_maps = mysql:/etc/postfix/mysql_virtual_alias_maps.cf relay_domains = mysql:/etc/postfix/mysql_relay_domains.cf smtpd_recipient_restrictions = permit_mynetworks, permit_sasl_authenticated, reject_non_fqdn_hostname, reject_non_fqdn_sender, reject_non_fqdn_recipient, reject_unauth_destination, reject_unauth_pipelining, reject_invalid_hostname smtpd_sasl_auth_enable = yes smtpd_sasl_security_options = noanonymous virtual_transport=dovecot dovecot_destination_recipient_limit = 1 master.cf: # # Postfix master process configuration file. For details on the format # of the file, see the master(5) manual page (command: "man 5 master"). # # Do not forget to execute "postfix reload" after editing this file. # # ========================================================================== # service type private unpriv chroot wakeup maxproc command + args # (yes) (yes) (yes) (never) (100) # ========================================================================== smtp inet n - - - - smtpd #smtp inet n - - - 1 postscreen #smtpd pass - - - - - smtpd #dnsblog unix - - - - 0 dnsblog #tlsproxy unix - - - - 0 tlsproxy #submission inet n - - - - smtpd # -o smtpd_tls_security_level=encrypt # -o smtpd_sasl_auth_enable=yes # -o smtpd_client_restrictions=permit_sasl_authenticated,reject # -o milter_macro_daemon_name=ORIGINATING #smtps inet n - - - - smtpd # -o smtpd_tls_wrappermode=yes # -o smtpd_sasl_auth_enable=yes # -o smtpd_client_restrictions=permit_sasl_authenticated,reject # -o milter_macro_daemon_name=ORIGINATING #628 inet n - - - - qmqpd pickup fifo n - - 60 1 pickup cleanup unix n - - - 0 cleanup qmgr fifo n - n 300 1 qmgr #qmgr fifo n - - 300 1 oqmgr tlsmgr unix - - - 1000? 1 tlsmgr rewrite unix - - - - - trivial-rewrite bounce unix - - - - 0 bounce defer unix - - - - 0 bounce trace unix - - - - 0 bounce verify unix - - - - 1 verify flush unix n - - 1000? 0 flush proxymap unix - - n - - proxymap proxywrite unix - - n - 1 proxymap smtp unix - - - - - smtp # When relaying mail as backup MX, disable fallback_relay to avoid MX loops relay unix - - - - - smtp -o smtp_fallback_relay= # -o smtp_helo_timeout=5 -o smtp_connect_timeout=5 showq unix n - - - - showq error unix - - - - - error retry unix - - - - - error discard unix - - - - - discard local unix - n n - - local virtual unix - n n - - virtual lmtp unix - - - - - lmtp anvil unix - - - - 1 anvil scache unix - - - - 1 scache # # ==================================================================== # Interfaces to non-Postfix software. Be sure to examine the manual # pages of the non-Postfix software to find out what options it wants. # # Many of the following services use the Postfix pipe(8) delivery # agent. See the pipe(8) man page for information about ${recipient} # and other message envelope options. # ==================================================================== # # maildrop. See the Postfix MAILDROP_README file for details. # Also specify in main.cf: maildrop_destination_recipient_limit=1 # maildrop unix - n n - - pipe flags=DRhu user=vmail argv=/usr/bin/maildrop -d ${recipient} # # ==================================================================== # # Recent Cyrus versions can use the existing "lmtp" master.cf entry. # # Specify in cyrus.conf: # lmtp cmd="lmtpd -a" listen="localhost:lmtp" proto=tcp4 # # Specify in main.cf one or more of the following: # mailbox_transport = lmtp:inet:localhost # virtual_transport = lmtp:inet:localhost # # ==================================================================== # # Cyrus 2.1.5 (Amos Gouaux) # Also specify in main.cf: cyrus_destination_recipient_limit=1 # #cyrus unix - n n - - pipe # user=cyrus argv=/cyrus/bin/deliver -e -r ${sender} -m ${extension} ${user} # # ==================================================================== # Old example of delivery via Cyrus. # #old-cyrus unix - n n - - pipe # flags=R user=cyrus argv=/cyrus/bin/deliver -e -m ${extension} ${user} # # ==================================================================== # # See the Postfix UUCP_README file for configuration details. # uucp unix - n n - - pipe flags=Fqhu user=uucp argv=uux -r -n -z -a$sender - $nexthop!rmail ($recipient) # # Other external delivery methods. # ifmail unix - n n - - pipe flags=F user=ftn argv=/usr/lib/ifmail/ifmail -r $nexthop ($recipient) bsmtp unix - n n - - pipe flags=Fq. user=bsmtp argv=/usr/lib/bsmtp/bsmtp -t$nexthop -f$sender $recipient scalemail-backend unix - n n - 2 pipe flags=R user=scalemail argv=/usr/lib/scalemail/bin/scalemail-store ${nexthop} ${user} ${extension} mailman unix - n n - - pipe flags=FR user=list argv=/usr/lib/mailman/bin/postfix-to-mailman.py ${nexthop} ${user} dovecot unix - n n - - pipe flags=DRhu user=vmail:vmail argv=/usr/lib/dovecot/deliver -d ${recipient}

Read the article

nginx - redirection doesn't work as expected

- by Luis

I have a domain listening on both http and https. I want to redirect all the traffic to https except for two specific locations. It works, but only for mydomain.com, not for www.mydomain.com. Here the config: upstream mydomain_rails { server unix:/home/deploy/mydomain/shared/pids/unicorn.sock; } # blog.mydomain.com server { listen 80; server_name blog.mydomain.com; rewrite ^ http://www.mydomain.com/de/blog permanent; } # blog.mydomain.com.br server { listen 80; server_name blog.mydomain.com.br; rewrite ^ http://www.mydomain.com/br/blog permanent; } # www.mydomain.de server { listen 80; server_name mydomain.de www.mydomain.de; rewrite ^ https://www.mydomain.com/de permanent; } # www.mydomain.com.br server { listen 80; server_name mydomain.com.br www.mydomain.com.br; rewrite ^ https://www.mydomain.com/br permanent; } server { listen 80; server_name mydomain.com; rewrite ^ http://www.mydomain.com$request_uri permanent; } ## www.mydomain.com ## Redirect http to https, keep blogs on plain http server { listen 80; server_name www.mydomain.com; location / { # if ($host ~* ^(www\.mydomain\.com)$ ) { rewrite ^/(.*)$ https://www.mydomain.com/$1 permanent; # } # return 444; } # Matches any request starting with '/br/blog' and proxies to the upstream blog instance location ~* /br/blog { proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_set_header Host $http_host; proxy_redirect off; if (!-f $request_filename) { rewrite ^/br/blog$ /; rewrite ^/br/blog/(.*)$ /$1; proxy_pass http://mydomain_blog_br; break; } } # Matches any request starting with '/de/blog' and proxies to the upstream blog instance location ~* /de/blog { proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_set_header Host $http_host; proxy_redirect off; if (!-f $request_filename) { rewrite ^/de/blog$ /; rewrite ^/de/blog/(.*)$ /$1; proxy_pass http://mydomain_blog; break; } } } # www.mydomain.com server { add_header Cache-Control "public, must-revalidate"; server_name mydomain.com www.mydomain.com; listen 443; ssl on; ssl_certificate /etc/ssl/mydomain.com/sslchain.crt; ssl_certificate_key /etc/ssl/mydomain.com/privatekey.key; ## Strict Transport Security (ForceHTTPS), max-age 30d add_header Strict-Transport-Security "max-age=2592000; includeSubdomains"; ## Due SSL encryption, rather to increase the keepalive requests and timeout keepalive_requests 10; keepalive_timeout 60 60; root /home/deploy/mydomain/current/public/; error_log /home/deploy/mydomain/shared/log/nginx.error.log info; access_log /home/deploy/mydomain/shared/log/nginx.access.log main; ## Redirect from non-www to www if ($host = 'mydomain.com' ) { rewrite ^/(.*)$ https://www.mydomain.com/$1 permanent; } ## Caching images for 3 months location ~* \.(ico|css|js|gif|jpe?g|png)\?[0-9]+$ { expires 30d; break; } ## Deny illegal Host headers if ($host !~* ^(mydomain.com|www.mydomain.com)$ ) { return 444; } ## Deny certain User-Agents (case insensitive) if ($http_user_agent ~* (Baiduspider|webalta|Wget|WordPress|youdao|jakarta) ) { return 444; } ## Deny certain Referers (case insensitive) if ($http_referer ~* (dating|diamond|forsale|girl|jewelry|nudit|poker|porn|poweroversoftware|sex|teen|webcam|zippo|zongdo) ) { return 444; } ## Enable maintenance page. The page is copied in during capistrano deployment set $maintenance 0; if (-f $document_root/index.html) { set $maintenance 1; } if ($request_uri ~* (jpg|jpeg|gif|png|js|css)$) { set $maintenance 0; } if ($maintenance) { rewrite ^(.*)$ /index.html last; break; } location /uk { auth_basic "Restricted"; auth_basic_user_file /etc/nginx/htpasswd; root /home/deploy/mydomain/current/public/; try_files $uri @fallback; } # Matches any request starting with '/br/blog' and proxies to the upstream blog instance location ^~ /br/blog { proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_set_header Host $http_host; proxy_redirect off; if (!-f $request_filename) { rewrite ^/br/blog$ /; rewrite ^/br/blog/(.*)$ /$1; proxy_pass http://mydomain_blog_br; break; } } # Matches any request starting with '/de/blog' and proxies to the upstream blog instance location ^~ /de/blog { proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_set_header Host $http_host; proxy_redirect off; if (!-f $request_filename) { rewrite ^/de/blog$ /; rewrite ^/de/blog/(.*)$ /$1; proxy_pass http://mydomain_blog; break; }} # Matches any request starting with '/lp' and proxies to the upstream blog instance location /lp { proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_set_header Host $http_host; proxy_redirect off; rewrite ^/lp(/?.*)$ /$1; proxy_pass http://mydomain_landingpage; break; } #Matches any request, and looks for static files before reverse proxying to the upstream app server socket location / { root /home/deploy/mydomain/current/public/; try_files $uri @fallback; } # Called after the above pattern, if no static file is found location @fallback { proxy_set_header X-Sendfile-Type X-Accel-Redirect; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_set_header Host $http_host; proxy_redirect off; proxy_pass http://mydomain_rails; } ## All other errors get the generic error page error_page 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 495 496 497 500 501 502 503 504 505 506 507 /500.html; location /500.html { root /home/deploy/mydomain/current/public/; } } I defined the blog upstream. As said, it works properly for mydomain.com, but not for www.mydomain.com. Any idea?

Read the article

Inbound SIP calls through Cisco 881 NAT hang up after a few seconds

- by MasterRoot24

I've recently moved to a Cisco 881 router for my WAN link. I was previously using a Cisco Linksys WAG320N as my modem/router/WiFi AP/NAT firewall. The WAG320N is now running in bridged mode, so it's simply acting as a modem with one of it's LAN ports connected to FE4 WAN on my Cisco 881. The Cisco 881 get's a DHCP provided IP from my ISP. My LAN is part of default Vlan 1 (192.168.1.0/24). General internet connectivity is working great, I've managed to setup static NAT rules for my HTTP/HTTPS/SMTP/etc. services which are running on my LAN. I don't know whether it's worth mentioning that I've opted to use NVI NAT (ip nat enable as opposed to the traditional ip nat outside/ip nat inside) setup. My reason for this is that NVI allows NAT loopback from my LAN to the WAN IP and back in to the necessary server on the LAN. I run an Asterisk 1.8 PBX on my LAN, which connects to a SIP provider on the internet. Both inbound and outbound calls through the old setup (WAG320N providing routing/NAT) worked fine. However, since moving to the Cisco 881, inbound calls drop after around 10 seconds, whereas outbound calls work fine. The following message is logged on my Asterisk PBX: [Dec 9 15:27:45] WARNING[27734]: chan_sip.c:3641 retrans_pkt: Retransmission timeout reached on transmission [email protected] for seqno 1 (Critical Response) -- See https://wiki.asterisk.org/wiki/display/AST/SIP+Retransmissions Packet timed out after 6528ms with no response [Dec 9 15:27:45] WARNING[27734]: chan_sip.c:3670 retrans_pkt: Hanging up call [email protected] - no reply to our critical packet (see https://wiki.asterisk.org/wiki/display/AST/SIP+Retransmissions). (I know that this is quite a common issue - I've spend the best part of 2 days solid on this, trawling Google.) I've done as I am told and checked https://wiki.asterisk.org/wiki/display/AST/SIP+Retransmissions. Referring to the section "Other SIP requests" in the page linked above, I believe that the hangup to be caused by the ACK from my SIP provider not being passed back through NAT to Asterisk on my PBX. I tried to ascertain this by dumping the packets on my WAN interface on the 881. I managed to obtain a PCAP dump of packets in/out of my WAN interface. Here's an example of an ACK being reveived by the router from my provider: 689 21.219999 193.x.x.x 188.x.x.x SIP 502 Request: ACK sip:[email protected] | However a SIP trace on the Asterisk server show's that there are no ACK's received in response to the 200 OK from my PBX: http://pastebin.com/wwHpLPPz In the past, I have been strongly advised to disable any sort of SIP ALGs on routers and/or firewalls and the many posts regarding this issue on the internet seem to support this. However, I believe on Cisco IOS, the config command to disable SIP ALG is no ip nat service sip udp port 5060 however, this doesn't appear to help the situation. To confirm that config setting is set: Router1#show running-config | include sip no ip nat service sip udp port 5060 Another interesting twist: for a short period of time, I tried another provider. Luckily, my trial account with them is still available, so I reverted my Asterisk config back to the revision before I integrated with my current provider. I then dialled in to the DDI associated with the trial trunk and the call didn't get hung up and I didn't get the error above! To me, this points at the provider, however I know, like all providers do, will say "There's no issues with our SIP proxies - it's your firewall." I'm tempted to agree with this, as this issue was not apparent with the old WAG320N router when it was doing the NAT'ing. I'm sure you'll want to see my running-config too: ! ! Last configuration change at 15:55:07 UTC Sun Dec 9 2012 by xxx version 15.2 no service pad service tcp-keepalives-in service tcp-keepalives-out service timestamps debug datetime msec localtime show-timezone service timestamps log datetime msec localtime show-timezone no service password-encryption service sequence-numbers ! hostname Router1 ! boot-start-marker boot-end-marker ! ! security authentication failure rate 10 log security passwords min-length 6 logging buffered 4096 logging console critical enable secret 4 xxx ! aaa new-model ! ! aaa authentication login local_auth local ! ! ! ! ! aaa session-id common ! memory-size iomem 10 ! crypto pki trustpoint TP-self-signed-xxx enrollment selfsigned subject-name cn=IOS-Self-Signed-Certificate-xxx revocation-check none rsakeypair TP-self-signed-xxx ! ! crypto pki certificate chain TP-self-signed-xxx certificate self-signed 01 quit no ip source-route no ip gratuitous-arps ip auth-proxy max-login-attempts 5 ip admission max-login-attempts 5 ! ! ! ! ! no ip bootp server ip domain name dmz.merlin.local ip domain list dmz.merlin.local ip domain list merlin.local ip name-server x.x.x.x ip inspect audit-trail ip inspect udp idle-time 1800 ip inspect dns-timeout 7 ip inspect tcp idle-time 14400 ip inspect name autosec_inspect ftp timeout 3600 ip inspect name autosec_inspect http timeout 3600 ip inspect name autosec_inspect rcmd timeout 3600 ip inspect name autosec_inspect realaudio timeout 3600 ip inspect name autosec_inspect smtp timeout 3600 ip inspect name autosec_inspect tftp timeout 30 ip inspect name autosec_inspect udp timeout 15 ip inspect name autosec_inspect tcp timeout 3600 ip cef login block-for 3 attempts 3 within 3 no ipv6 cef ! ! multilink bundle-name authenticated license udi pid CISCO881-SEC-K9 sn ! ! username xxx privilege 15 secret 4 xxx username xxx secret 4 xxx ! ! ! ! ! ip ssh time-out 60 ! ! ! ! ! ! ! ! ! interface FastEthernet0 no ip address ! interface FastEthernet1 no ip address ! interface FastEthernet2 no ip address ! interface FastEthernet3 switchport access vlan 2 no ip address ! interface FastEthernet4 ip address dhcp no ip redirects no ip unreachables no ip proxy-arp ip nat enable duplex auto speed auto ! interface Vlan1 ip address 192.168.1.1 255.255.255.0 no ip redirects no ip unreachables no ip proxy-arp ip nat enable ! interface Vlan2 ip address 192.168.0.2 255.255.255.0 ! ip forward-protocol nd ip http server ip http access-class 1 ip http authentication local ip http secure-server ip http timeout-policy idle 60 life 86400 requests 10000 ! ! no ip nat service sip udp port 5060 ip nat source list 1 interface FastEthernet4 overload ip nat source static tcp x.x.x.x 80 interface FastEthernet4 80 ip nat source static tcp x.x.x.x 443 interface FastEthernet4 443 ip nat source static tcp x.x.x.x 25 interface FastEthernet4 25 ip nat source static tcp x.x.x.x 587 interface FastEthernet4 587 ip nat source static tcp x.x.x.x 143 interface FastEthernet4 143 ip nat source static tcp x.x.x.x 993 interface FastEthernet4 993 ip nat source static tcp x.x.x.x 1723 interface FastEthernet4 1723 ! ! logging trap debugging logging facility local2 access-list 1 permit 192.168.1.0 0.0.0.255 access-list 1 permit 192.168.0.0 0.0.0.255 no cdp run ! ! ! ! control-plane ! ! banner motd Authorized Access only ! line con 0 login authentication local_auth length 0 transport output all line aux 0 exec-timeout 15 0 login authentication local_auth transport output all line vty 0 1 access-class 1 in logging synchronous login authentication local_auth length 0 transport preferred none transport input telnet transport output all line vty 2 4 access-class 1 in login authentication local_auth length 0 transport input ssh transport output all ! ! end ...and, if it's of any use, here's my Asterisk SIP config: [general] context=default ; Default context for calls allowoverlap=no ; Disable overlap dialing support. (Default is yes) udpbindaddr=0.0.0.0 ; IP address to bind UDP listen socket to (0.0.0.0 binds to all) ; Optionally add a port number, 192.168.1.1:5062 (default is port 5060) tcpenable=no ; Enable server for incoming TCP connections (default is no) tcpbindaddr=0.0.0.0 ; IP address for TCP server to bind to (0.0.0.0 binds to all interfaces) ; Optionally add a port number, 192.168.1.1:5062 (default is port 5060) srvlookup=yes ; Enable DNS SRV lookups on outbound calls ; Note: Asterisk only uses the first host ; in SRV records ; Disabling DNS SRV lookups disables the ; ability to place SIP calls based on domain ; names to some other SIP users on the Internet ; Specifying a port in a SIP peer definition or ; when dialing outbound calls will supress SRV ; lookups for that peer or call. directmedia=no ; Don't allow direct RTP media between extensions (doesn't work through NAT) externhost=<MY DYNDNS HOSTNAME> ; Our external hostname to resolve to IP and be used in NAT'ed packets localnet=192.168.1.0/24 ; Define our local network so we know which packets need NAT'ing qualify=yes ; Qualify peers by default dtmfmode=rfc2833 ; Set the default DTMF mode disallow=all ; Disallow all codecs by default allow=ulaw ; Allow G.711 u-law allow=alaw ; Allow G.711 a-law ; ---------------------- ; SIP Trunk Registration ; ---------------------- ; Orbtalk register => <MY SIP PROVIDER USER NAME>:[email protected]/<MY DDI> ; Main Orbtalk number ; ---------- ; Trunks ; ---------- [orbtalk] ; Main Orbtalk trunk type=peer insecure=invite host=sipgw3.orbtalk.co.uk nat=yes username=<MY SIP PROVIDER USER NAME> defaultuser=<MY SIP PROVIDER USER NAME> fromuser=<MY SIP PROVIDER USER NAME> secret=xxx context=inbound I really don't know where to go with this. If anyone can help me find out why these calls are being dropped off, I'd be grateful if you could chime in! Please let me know if any further info is required.

Read the article

Can't connect to samba

- by Rick

Windows 7, connecting to Samba shares I have a follow up question from the link above. I am running Samba 3.0.23d on FreeBSD is release 7.1 I changed the policies as described above but still cannot connect to the samba server with the windows 7 or a server 2008. I feel it is a problem with recognizing the new machines on the network. the windows machines can see the samba server, but cannot connect to it or view any of the files. After changing the security policies the samba server asked for network id and password but would not allow the machine to connect, said they were unknown username or bad password. Here is my current config file. there is no sign of encryption anywhere, should I just add the line? not sure what that would do elsewhere. Workgroup = WWOFFSET server string = WWO File Server (%v) security = server username map = /usr/local/etc/smb.users hosts allow = 10. 127. # If you want to automatically load your printer list rather # than setting them up individually then you'll need this ; load printers = yes # you may wish to override the location of the printcap file ; printcap name = /etc/printcap # on SystemV system setting printcap name to lpstat should allow # you to automatically obtain a printer list from the SystemV spool # system ; printcap name = lpstat # It should not be necessary to specify the print system type unless # it is non-standard. Currently supported print systems include: # bsd, cups, sysv, plp, lprng, aix, hpux, qnx ; printing = cups # Uncomment this if you want a guest account, you must add this to /etc/passwd # otherwise the user "nobody" is used ; guest account = pcguest # this tells Samba to use a separate log file for each machine # that connects log file = /var/log/samba/log.%m # Put a capping on the size of the log files (in Kb). max log size = 50 # Use password server option only with security = server # The argument list may include: # password server = My_PDC_Name [My_BDC_Name] [My_Next_BDC_Name] # or to auto-locate the domain controller/s # password server = * ; password server = <NT-Server-Name> password server = SERVER0 # Use the realm option only with security = ads # Specifies the Active Directory realm the host is part of ; realm = MY_REALM # Backend to store user information in. New installations should # use either tdbsam or ldapsam. smbpasswd is available for backwards # compatibility. tdbsam requires no further configuration. ; passdb backend = tdbsam ; passdb backend = smbpasswd # Using the following line enables you to customise your configuration # on a per machine basis. The %m gets replaced with the netbios name # of the machine that is connecting. # Note: Consider carefully the location in the configuration file of # this line. The included file is read at that point. ; include = /usr/local/etc/smb.conf.%m # Most people will find that this option gives better performance. # See the chapter 'Samba performance issues' in the Samba HOWTO Collection # and the manual pages for details. # You may want to add the following on a Linux system: # SO_RCVBUF=8192 SO_SNDBUF=8192 socket options = TCP_NODELAY # Configure Samba to use multiple interfaces # If you have multiple network interfaces then you must list them # here. See the man page for details. ; interfaces = 192.168.12.2/24 192.168.13.2/24 # Browser Control Options: # set local master to no if you don't want Samba to become a master # browser on your network. Otherwise the normal election rules apply ; local master = no # OS Level determines the precedence of this server in master browser # elections. The default value should be reasonable ; os level = 33 # Domain Master specifies Samba to be the Domain Master Browser. This # allows Samba to collate browse lists between subnets. Don't use this # if you already have a Windows NT domain controller doing this job ; domain master = yes # Preferred Master causes Samba to force a local browser election on startup # and gives it a slightly higher chance of winning the election ; preferred master = yes # Enable this if you want Samba to be a domain logon server for # Windows95 workstations. ; domain logons = yes # if you enable domain logons then you may want a per-machine or # per user logon script # run a specific logon batch file per workstation (machine) ; logon script = %m.bat # run a specific logon batch file per username ; logon script = %U.bat # Where to store roving profiles (only for Win95 and WinNT) # %L substitutes for this servers netbios name, %U is username # You must uncomment the [Profiles] share below ; logon path = \\%L\Profiles\%U # Windows Internet Name Serving Support Section: # WINS Support - Tells the NMBD component of Samba to enable it's WINS Server ; wins support = yes # WINS Server - Tells the NMBD components of Samba to be a WINS Client # Note: Samba can be either a WINS Server, or a WINS Client, but NOT both ; wins server = w.x.y.z # WINS Proxy - Tells Samba to answer name resolution queries on # behalf of a non WINS capable client, for this to work there must be # at least one WINS Server on the network. The default is NO. ; wins proxy = yes # DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names # via DNS nslookups. The default is NO. dns proxy = no # charset settings ; display charset = ASCII ; unix charset = ASCII ; dos charset = ASCII # These scripts are used on a domain controller or stand-alone # machine to add or delete corresponding unix accounts ; add user script = /usr/sbin/useradd %u ; add group script = /usr/sbin/groupadd %g ; add machine script = /usr/sbin/adduser -n -g machines -c Machine -d /dev/null -s /bin/false %u ; delete user script = /usr/sbin/userdel %u ; delete user from group script = /usr/sbin/deluser %u %g ; delete group script = /usr/sbin/groupdel %g unix extensions = no

Read the article

OpenVPN Client timing out

- by Austin

I recently installed OpenVPN on my Ubuntu VPS. Whenenver I try to connect to it, I can establish a connection just fine. However, everything I try to connect to times out. If I try to ping something, it will resolve the IP, but will time out after resolving the IP. (So DNS Server seems to be working correctly) My server.conf has this relevant information (At least I think it's relevant. I'm not sure if you need more or not) # Which local IP address should OpenVPN # listen on? (optional) ;local a.b.c.d # Which TCP/UDP port should OpenVPN listen on? # If you want to run multiple OpenVPN instances # on the same machine, use a different port # number for each one. You will need to # open up this port on your firewall. port 1194 # TCP or UDP server? ;proto tcp proto udp # "dev tun" will create a routed IP tunnel, # "dev tap" will create an ethernet tunnel. # Use "dev tap0" if you are ethernet bridging # and have precreated a tap0 virtual interface # and bridged it with your ethernet interface. # If you want to control access policies # over the VPN, you must create firewall # rules for the the TUN/TAP interface. # On non-Windows systems, you can give # an explicit unit number, such as tun0. # On Windows, use "dev-node" for this. # On most systems, the VPN will not function # unless you partially or fully disable # the firewall for the TUN/TAP interface. ;dev tap dev tun # Windows needs the TAP-Win32 adapter name # from the Network Connections panel if you # have more than one. On XP SP2 or higher, # you may need to selectively disable the # Windows firewall for the TAP adapter. # Non-Windows systems usually don't need this. ;dev-node MyTap # SSL/TLS root certificate (ca), certificate # (cert), and private key (key). Each client # and the server must have their own cert and # key file. The server and all clients will # use the same ca file. # # See the "easy-rsa" directory for a series # of scripts for generating RSA certificates # and private keys. Remember to use # a unique Common Name for the server # and each of the client certificates. # # Any X509 key management system can be used. # OpenVPN can also use a PKCS #12 formatted key file # (see "pkcs12" directive in man page). ca ca.crt cert server.crt key server.key # This file should be kept secret # Diffie hellman parameters. # Generate your own with: # openssl dhparam -out dh1024.pem 1024 # Substitute 2048 for 1024 if you are using # 2048 bit keys. dh dh1024.pem # Configure server mode and supply a VPN subnet # for OpenVPN to draw client addresses from. # The server will take 10.8.0.1 for itself, # the rest will be made available to clients. # Each client will be able to reach the server # on 10.8.0.1. Comment this line out if you are # ethernet bridging. See the man page for more info. server 10.8.0.0 255.255.255.0 # Maintain a record of client <-> virtual IP address # associations in this file. If OpenVPN goes down or # is restarted, reconnecting clients can be assigned # the same virtual IP address from the pool that was # previously assigned. ifconfig-pool-persist ipp.txt # Configure server mode for ethernet bridging. # You must first use your OS's bridging capability # to bridge the TAP interface with the ethernet # NIC interface. Then you must manually set the # IP/netmask on the bridge interface, here we # assume 10.8.0.4/255.255.255.0. Finally we # must set aside an IP range in this subnet # (start=10.8.0.50 end=10.8.0.100) to allocate # to connecting clients. Leave this line commented # out unless you are ethernet bridging. ;server-bridge 10.8.0.4 255.255.255.0 10.8.0.50 10.8.0.100 # Configure server mode for ethernet bridging # using a DHCP-proxy, where clients talk # to the OpenVPN server-side DHCP server # to receive their IP address allocation # and DNS server addresses. You must first use # your OS's bridging capability to bridge the TAP # interface with the ethernet NIC interface. # Note: this mode only works on clients (such as # Windows), where the client-side TAP adapter is # bound to a DHCP client. ;server-bridge # Push routes to the client to allow it # to reach other private subnets behind # the server. Remember that these # private subnets will also need # to know to route the OpenVPN client # address pool (10.8.0.0/255.255.255.0) # back to the OpenVPN server. ;push "route 192.168.10.0 255.255.255.0" ;push "route 192.168.20.0 255.255.255.0" # To assign specific IP addresses to specific # clients or if a connecting client has a private # subnet behind it that should also have VPN access, # use the subdirectory "ccd" for client-specific # configuration files (see man page for more info). # EXAMPLE: Suppose the client # having the certificate common name "Thelonious" # also has a small subnet behind his connecting # machine, such as 192.168.40.128/255.255.255.248. # First, uncomment out these lines: ;client-config-dir ccd ;route 192.168.40.128 255.255.255.248 # Then create a file ccd/Thelonious with this line: # iroute 192.168.40.128 255.255.255.248 # This will allow Thelonious' private subnet to # access the VPN. This example will only work # if you are routing, not bridging, i.e. you are # using "dev tun" and "server" directives. # EXAMPLE: Suppose you want to give # Thelonious a fixed VPN IP address of 10.9.0.1. # First uncomment out these lines: ;client-config-dir ccd ;route 10.9.0.0 255.255.255.252 # Then add this line to ccd/Thelonious: # ifconfig-push 10.9.0.1 10.9.0.2 # Suppose that you want to enable different # firewall access policies for different groups # of clients. There are two methods: # (1) Run multiple OpenVPN daemons, one for each # group, and firewall the TUN/TAP interface # for each group/daemon appropriately. # (2) (Advanced) Create a script to dynamically # modify the firewall in response to access # from different clients. See man # page for more info on learn-address script. ;learn-address ./script # If enabled, this directive will configure # all clients to redirect their default # network gateway through the VPN, causing # all IP traffic such as web browsing and # and DNS lookups to go through the VPN # (The OpenVPN server machine may need to NAT # or bridge the TUN/TAP interface to the internet # in order for this to work properly). push "redirect-gateway def1 bypass-dhcp" push "dhcp-option DNS 8.8.8.8" # Certain Windows-specific network settings # can be pushed to clients, such as DNS # or WINS server addresses. CAVEAT: # http://openvpn.net/faq.html#dhcpcaveats # The addresses below refer to the public # DNS servers provided by opendns.com. ;push "dhcp-option DNS 8.8.8.8" push "dhcp-option DNS 8.8.4.4" # Uncomment this directive to allow different # clients to be able to "see" each other. # By default, clients will only see the server. # To force clients to only see the server, you # will also need to appropriately firewall the # server's TUN/TAP interface. ;client-to-client # Uncomment this directive if multiple clients # might connect with the same certificate/key # files or common names. This is recommended # only for testing purposes. For production use, # each client should have its own certificate/key # pair. # # IF YOU HAVE NOT GENERATED INDIVIDUAL # CERTIFICATE/KEY PAIRS FOR EACH CLIENT, # EACH HAVING ITS OWN UNIQUE "COMMON NAME", # UNCOMMENT THIS LINE OUT. ;duplicate-cn # The keepalive directive causes ping-like # messages to be sent back and forth over # the link so that each side knows when # the other side has gone down. # Ping every 10 seconds, assume that remote # peer is down if no ping received during # a 120 second time period. keepalive 10 120 # For extra security beyond that provided # by SSL/TLS, create an "HMAC firewall" # to help block DoS attacks and UDP port flooding. # # Generate with: # openvpn --genkey --secret ta.key # # The server and each client must have # a copy of this key. # The second parameter should be '0' # on the server and '1' on the clients. ;tls-auth ta.key 0 # This file is secret # Select a cryptographic cipher. # This config item must be copied to # the client config file as well. ;cipher BF-CBC # Blowfish (default) ;cipher AES-128-CBC # AES ;cipher DES-EDE3-CBC # Triple-DES # Enable compression on the VPN link. # If you enable it here, you must also # enable it in the client config file. comp-lzo # The maximum number of concurrently connected # clients we want to allow. ;max-clients 100 # It's a good idea to reduce the OpenVPN # daemon's privileges after initialization. # # You can uncomment this out on # non-Windows systems. ;user nobody ;group nogroup # The persist options will try to avoid # accessing certain resources on restart # that may no longer be accessible because # of the privilege downgrade. persist-key persist-tun # Output a short status file showing # current connections, truncated # and rewritten every minute. status openvpn-status.log # By default, log messages will go to the syslog (or # on Windows, if running as a service, they will go to # the "\Program Files\OpenVPN\log" directory). # Use log or log-append to override this default. # "log" will truncate the log file on OpenVPN startup, # while "log-append" will append to it. Use one # or the other (but not both). ;log openvpn.log ;log-append openvpn.log # Set the appropriate level of log # file verbosity. # # 0 is silent, except for fatal errors # 4 is reasonable for general usage # 5 and 6 can help to debug connection problems # 9 is extremely verbose verb 3 # Silence repeating messages. At most 20 # sequential messages of the same message # category will be output to the log. ;mute 20 I've tried on multiple computers by the way. The same result on all of them. What could be wrong? Thanks in advance, and if you need other information I'll gladly post it. Information for new comments root@vps:~# iptables -L -n -v Chain INPUT (policy ACCEPT 862K packets, 51M bytes) pkts bytes target prot opt in out source destination Chain FORWARD (policy ACCEPT 3 packets, 382 bytes) pkts bytes target prot opt in out source destination 0 0 ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED 4641 298K ACCEPT all -- * * 10.8.0.0/24 0.0.0.0/0 0 0 REJECT all -- * * 0.0.0.0/0 0.0.0.0/0 reject-with icmp-port-unreachable Chain OUTPUT (policy ACCEPT 1671K packets, 2378M bytes) pkts bytes target prot opt in out source destination And root@vps:~# iptables -t nat -L -n -v Chain PREROUTING (policy ACCEPT 17937 packets, 2013K bytes) pkts bytes target prot opt in out source destination Chain POSTROUTING (policy ACCEPT 8975 packets, 562K bytes) pkts bytes target prot opt in out source destination 1579 103K SNAT all -- * * 10.8.0.0/24 0.0.0.0/0 to:SERVERIP Chain OUTPUT (policy ACCEPT 8972 packets, 562K bytes) pkts bytes target prot opt in out source destination

Read the article

IIS Strategies for Accessing Secured Network Resources

- by Emtucifor

Problem: A user connects to a service on a machine, such as an IIS web site or a SQL Server database. The site or the database need to gain access to network resources such as file shares (the most common) or a database on a different server. Permission is denied. This is because the user the service is running as doesn't have network permissions in the first place, or if it does, it doesn't have rights to access the remote resource. I keep running into this problem over and over again and am tired of not having a really solid way of handling it. Here are some workarounds I'm aware of: Run IIS as a custom-created domain user who is granted high permissions If permissions are granted one file share at a time, then every time I want to read from a new share, I would have to ask a network admin to add it for me. Eventually, with many web sites reading from many shares, it is going to get really complicated. If permissions are just opened up wide for the user to access any file shares in our domain, then this seems like an unnecessary security surface area to present. This also applies to all the sites running on IIS, rather than just the selected site or virtual directory that needs the access, a further surface area problem. Still use the IUSR account but give it network permissions and set up the same user name on the remote resource (not a domain user, a local user) This also has its problems. For example, there's a file share I am using that I have full rights to for sharing, but I can't log in to the machine. So I have to find the right admin and ask him to do it for me. Any time something has to change, it's another request to an admin. Allow IIS users to connect as anonymous, but set the account used for anonymous access to a high-privilege one This is even worse than giving the IIS IUSR full privileges, because it means my web site can't use any kind of security in the first place. Connect using Kerberos, then delegate This sounds good in principle but has all sorts of problems. First of all, if you're using virtual web sites where the domain name you connect to the site with is not the base machine name (as we do frequently), then you have to set up a Service Principal Name on the webserver using Microsoft's SetSPN utility. It's complicated and apparently prone to errors. Also, you have to ask your network/domain admin to change security policy for the web server so it is "trusted for delegation." If you don't get everything perfectly right, suddenly your intended Kerberos authentication is NTLM instead, and you can only impersonate rather than delegate, and thus no reaching out over the network as the user. Also, this method can be problematic because sometimes you need the web site or database to have permissions that the connecting user doesn't have. Create a service or COM+ application that fetches the resource for the web site Services and COM+ packages are run with their own set of credentials. Running as a high-privilege user is okay since they can do their own security and deny requests that are not legitimate, putting control in the hands of the application developer instead of the network admin. Problems: I am using a COM+ package that does exactly this on Windows Server 2000 to deliver highly sensitive images to a secured web application. I tried moving the web site to Windows Server 2003 and was suddenly denied permission to instantiate the COM+ object, very likely registry permissions. I trolled around quite a bit and did not solve the problem, partly because I was reluctant to give the IUSR account full registry permissions. That seems like the same bad practice as just running IIS as a high-privilege user. Note: This is actually really simple. In a programming language of your choice, you create a class with a function that returns an instance of the object you want (an ADODB.Connection, for example), and build a dll, which you register as a COM+ object. In your web server-side code, you create an instance of the class and use the function, and since it is running under a different security context, calls to network resources work. Map drive letters to shares This could theoretically work, but in my mind it's not really a good long-term strategy. Even though mappings can be created with specific credentials, and this can be done by others than a network admin, this also is going to mean that there are either way too many shared drives (small granularity) or too much permission is granted to entire file servers (large granularity). Also, I haven't figured out how to map a drive so that the IUSR gets the drives. Mapping a drive is for the current user, I don't know the IUSR account password to log in as it and create the mappings. Move the resources local to the web server/database There are times when I've done this, especially with Access databases. Does the database have to live out on the file share? Sometimes, it was just easiest to move the database to the web server or to the SQL database server (so the linked server to it would work). But I don't think this is a great all-around solution, either. And it won't work when the resource is a service rather than a file. Move the service to the final web server/database I suppose I could run a web server on my SQL Server database, so the web site can connect to it using impersonation and make me happy. But do we really want random extra web servers on our database servers just so this is possible? No. Virtual directories in IIS I know that virtual directories can help make remote resources look as though they are local, and this supports using custom credentials for each virtual directory. I haven't been able to come up with, yet, how this would solve the problem for system calls. Users could reach file shares directly, but this won't help, say, classic ASP code access resources. I could use a URL instead of a file path to read remote data files in a web page, but this isn't going to help me make a connection to an Access database, a SQL server database, or any other resource that uses a connection library rather than being able to just read all the bytes and work with them. I wish there was some kind of "service tunnel" that I could create. Think about how a VPN makes remote resources look like they are local. With a richer aliasing mechanism, perhaps code-based, why couldn't even database connections occur under a defined security context? Why not a special Windows component that lets you specify, per user, what resources are available and what alternate credentials are used for the connection? File shares, databases, web sites, you name it. I guess I'm almost talking about a specialized local proxy server. Anyway, so there's my list. I may update it if I think of more. Does anyone have any ideas for me? My current problem today is, yet again, I need a web site to connect to an Access database on a file share. Here we go again...

Read the article

FreeBSD 8.1 unstable network connection

- by frankcheong

I have three FreeBSD 8.1 running on three different hardware and therefore consist of different network adapter as well (bce, bge and igb). I found that the network connection is kind of unstable which I have tried to scp some 10MB file and found that I cannot always get the files completed successfully. I have further checked with my network admin and he claim that the problem is being caused by the network driver which cannot support the load whereby he tried to ping using huge packet size (around 15k) and my server will drop packet consistently at a regular interval. I found that this statement may not be valid since the three server is using three different network drive and it would be quite impossible that the same problem is being caused by three different network adapter and thus different network driver. Since then I have tried to tune up the performance by playing around with the /etc/sysctl.conf figures with no luck. kern.ipc.somaxconn=1024 kern.ipc.shmall=3276800 kern.ipc.shmmax=1638400000 # Security net.inet.ip.redirect=0 net.inet.ip.sourceroute=0 net.inet.ip.accept_sourceroute=0 net.inet.icmp.maskrepl=0 net.inet.icmp.log_redirect=0 net.inet.icmp.drop_redirect=1 net.inet.tcp.drop_synfin=1 # Security net.inet.udp.blackhole=1 net.inet.tcp.blackhole=2 # Required by pf net.inet.ip.forwarding=1 #Network Performance Tuning kern.ipc.maxsockbuf=16777216 net.inet.tcp.rfc1323=1 net.inet.tcp.sendbuf_max=16777216 net.inet.tcp.recvbuf_max=16777216 # Setting specifically for 1 or even 10Gbps network net.local.stream.sendspace=262144 net.local.stream.recvspace=262144 net.inet.tcp.local_slowstart_flightsize=10 net.inet.tcp.nolocaltimewait=1 net.inet.tcp.mssdflt=1460 net.inet.tcp.sendbuf_auto=1 net.inet.tcp.sendbuf_inc=16384 net.inet.tcp.recvbuf_auto=1 net.inet.tcp.recvbuf_inc=524288 net.inet.tcp.sendspace=262144 net.inet.tcp.recvspace=262144 net.inet.udp.recvspace=262144 kern.ipc.maxsockbuf=16777216 kern.ipc.nmbclusters=32768 net.inet.tcp.delayed_ack=1 net.inet.tcp.delacktime=100 net.inet.tcp.slowstart_flightsize=179 net.inet.tcp.inflight.enable=1 net.inet.tcp.inflight.min=6144 # Reduce the cache size of slow start connection net.inet.tcp.hostcache.expire=1 Our network admin also claim that they see quite a lot of network up and down from their cisco switch log while I cannot find any up down message inside the dmesg. Have further checked the netstat -s but dont have concrete idea. tcp: 133695291 packets sent 39408539 data packets (3358837321 bytes) 61868 data packets (89472844 bytes) retransmitted 24 data packets unnecessarily retransmitted 0 resends initiated by MTU discovery 50756141 ack-only packets (2148 delayed) 0 URG only packets 0 window probe packets 4372385 window update packets 39781869 control packets 134898031 packets received 72339403 acks (for 3357601899 bytes) 190712 duplicate acks 0 acks for unsent data 59339201 packets (3647021974 bytes) received in-sequence 114 completely duplicate packets (135202 bytes) 27 old duplicate packets 0 packets with some dup. data (0 bytes duped) 42090 out-of-order packets (60817889 bytes) 0 packets (0 bytes) of data after window 0 window probes 3953896 window update packets 64181 packets received after close 0 discarded for bad checksums 0 discarded for bad header offset fields 0 discarded because packet too short 45192 discarded due to memory problems 19945391 connection requests 1323420 connection accepts 0 bad connection attempts 0 listen queue overflows 0 ignored RSTs in the windows 21133581 connections established (including accepts) 21268724 connections closed (including 32737 drops) 207874 connections updated cached RTT on close 207874 connections updated cached RTT variance on close 132439 connections updated cached ssthresh on close 42392 embryonic connections dropped 72339338 segments updated rtt (of 69477829 attempts) 390871 retransmit timeouts 0 connections dropped by rexmit timeout 0 persist timeouts 0 connections dropped by persist timeout 0 Connections (fin_wait_2) dropped because of timeout 13990 keepalive timeouts 2 keepalive probes sent 13988 connections dropped by keepalive 173044 correct ACK header predictions 36947371 correct data packet header predictions 1323420 syncache entries added 0 retransmitted 0 dupsyn 0 dropped 1323420 completed 0 bucket overflow 0 cache overflow 0 reset 0 stale 0 aborted 0 badack 0 unreach 0 zone failures 1323420 cookies sent 0 cookies received 1864 SACK recovery episodes 18005 segment rexmits in SACK recovery episodes 26066896 byte rexmits in SACK recovery episodes 147327 SACK options (SACK blocks) received 87473 SACK options (SACK blocks) sent 0 SACK scoreboard overflow 0 packets with ECN CE bit set 0 packets with ECN ECT(0) bit set 0 packets with ECN ECT(1) bit set 0 successful ECN handshakes 0 times ECN reduced the congestion window udp: 5141258 datagrams received 0 with incomplete header 0 with bad data length field 0 with bad checksum 1 with no checksum 0 dropped due to no socket 129616 broadcast/multicast datagrams undelivered 0 dropped due to full socket buffers 0 not for hashed pcb 5011642 delivered 5016050 datagrams output 0 times multicast source filter matched sctp: 0 input packets 0 datagrams 0 packets that had data 0 input SACK chunks 0 input DATA chunks 0 duplicate DATA chunks 0 input HB chunks 0 HB-ACK chunks 0 input ECNE chunks 0 input AUTH chunks 0 chunks missing AUTH 0 invalid HMAC ids received 0 invalid secret ids received 0 auth failed 0 fast path receives all one chunk 0 fast path multi-part data 0 output packets 0 output SACKs 0 output DATA chunks 0 retransmitted DATA chunks 0 fast retransmitted DATA chunks 0 FR's that happened more than once to same chunk 0 intput HB chunks 0 output ECNE chunks 0 output AUTH chunks 0 ip_output error counter Packet drop statistics: 0 from middle box 0 from end host 0 with data 0 non-data, non-endhost 0 non-endhost, bandwidth rep only 0 not enough for chunk header 0 not enough data to confirm 0 where process_chunk_drop said break 0 failed to find TSN 0 attempt reverse TSN lookup 0 e-host confirms zero-rwnd 0 midbox confirms no space 0 data did not match TSN 0 TSN's marked for Fast Retran Timeouts: 0 iterator timers fired 0 T3 data time outs 0 window probe (T3) timers fired 0 INIT timers fired 0 sack timers fired 0 shutdown timers fired 0 heartbeat timers fired 0 a cookie timeout fired 0 an endpoint changed its cookiesecret 0 PMTU timers fired 0 shutdown ack timers fired 0 shutdown guard timers fired 0 stream reset timers fired 0 early FR timers fired 0 an asconf timer fired 0 auto close timer fired 0 asoc free timers expired 0 inp free timers expired 0 packet shorter than header 0 checksum error 0 no endpoint for port 0 bad v-tag 0 bad SID 0 no memory 0 number of multiple FR in a RTT window 0 RFC813 allowed sending 0 RFC813 does not allow sending 0 times max burst prohibited sending 0 look ahead tells us no memory in interface 0 numbers of window probes sent 0 times an output error to clamp down on next user send 0 times sctp_senderrors were caused from a user 0 number of in data drops due to chunk limit reached 0 number of in data drops due to rwnd limit reached 0 times a ECN reduced the cwnd 0 used express lookup via vtag 0 collision in express lookup 0 times the sender ran dry of user data on primary 0 same for above 0 sacks the slow way 0 window update only sacks sent 0 sends with sinfo_flags !=0 0 unordered sends 0 sends with EOF flag set 0 sends with ABORT flag set 0 times protocol drain called 0 times we did a protocol drain 0 times recv was called with peek 0 cached chunks used 0 cached stream oq's used 0 unread messages abandonded by close 0 send burst avoidance, already max burst inflight to net 0 send cwnd full avoidance, already max burst inflight to net 0 number of map array over-runs via fwd-tsn's ip: 137814085 total packets received 0 bad header checksums 0 with size smaller than minimum 0 with data size < data length 0 with ip length > max ip packet size 0 with header length < data size 0 with data length < header length 0 with bad options 0 with incorrect version number 1200 fragments received 0 fragments dropped (dup or out of space) 0 fragments dropped after timeout 300 packets reassembled ok 137813009 packets for this host 530 packets for unknown/unsupported protocol 0 packets forwarded (0 packets fast forwarded) 61 packets not forwardable 0 packets received for unknown multicast group 0 redirects sent 137234598 packets sent from this host 0 packets sent with fabricated ip header 685307 output packets dropped due to no bufs, etc. 52 output packets discarded due to no route 300 output datagrams fragmented 1200 fragments created 0 datagrams that can't be fragmented 0 tunneling packets that can't find gif 0 datagrams with bad address in header icmp: 0 calls to icmp_error 0 errors not generated in response to an icmp message Output histogram: echo reply: 305 0 messages with bad code fields 0 messages less than the minimum length 0 messages with bad checksum 0 messages with bad length 0 multicast echo requests ignored 0 multicast timestamp requests ignored Input histogram: destination unreachable: 530 echo: 305 305 message responses generated 0 invalid return addresses 0 no return routes ICMP address mask responses are disabled igmp: 0 messages received 0 messages received with too few bytes 0 messages received with wrong TTL 0 messages received with bad checksum 0 V1/V2 membership queries received 0 V3 membership queries received 0 membership queries received with invalid field(s) 0 general queries received 0 group queries received 0 group-source queries received 0 group-source queries dropped 0 membership reports received 0 membership reports received with invalid field(s) 0 membership reports received for groups to which we belong 0 V3 reports received without Router Alert 0 membership reports sent arp: 376748 ARP requests sent 3207 ARP replies sent 245245 ARP requests received 80845 ARP replies received 326090 ARP packets received 267712 total packets dropped due to no ARP entry 108876 ARP entrys timed out 0 Duplicate IPs seen ip6: 2226633 total packets received 0 with size smaller than minimum 0 with data size < data length 0 with bad options 0 with incorrect version number 0 fragments received 0 fragments dropped (dup or out of space) 0 fragments dropped after timeout 0 fragments that exceeded limit 0 packets reassembled ok 2226633 packets for this host 0 packets forwarded 0 packets not forwardable 0 redirects sent 2226633 packets sent from this host 0 packets sent with fabricated ip header 0 output packets dropped due to no bufs, etc. 8 output packets discarded due to no route 0 output datagrams fragmented 0 fragments created 0 datagrams that can't be fragmented 0 packets that violated scope rules 0 multicast packets which we don't join Input histogram: UDP: 2226633 Mbuf statistics: 962679 one mbuf 1263954 one ext mbuf 0 two or more ext mbuf 0 packets whose headers are not continuous 0 tunneling packets that can't find gif 0 packets discarded because of too many headers 0 failures of source address selection Source addresses selection rule applied: icmp6: 0 calls to icmp6_error 0 errors not generated in response to an icmp6 message 0 errors not generated because of rate limitation 0 messages with bad code fields 0 messages < minimum length 0 bad checksums 0 messages with bad length Histogram of error messages to be generated: 0 no route 0 administratively prohibited 0 beyond scope 0 address unreachable 0 port unreachable 0 packet too big 0 time exceed transit 0 time exceed reassembly 0 erroneous header field 0 unrecognized next header 0 unrecognized option 0 redirect 0 unknown 0 message responses generated 0 messages with too many ND options 0 messages with bad ND options 0 bad neighbor solicitation messages 0 bad neighbor advertisement messages 0 bad router solicitation messages 0 bad router advertisement messages 0 bad redirect messages 0 path MTU changes rip6: 0 messages received 0 checksum calculations on inbound 0 messages with bad checksum 0 messages dropped due to no socket 0 multicast messages dropped due to no socket 0 messages dropped due to full socket buffers 0 delivered 0 datagrams output netstat -m 516/5124/5640 mbufs in use (current/cache/total) 512/1634/2146/32768 mbuf clusters in use (current/cache/total/max) 512/1536 mbuf+clusters out of packet secondary zone in use (current/cache) 0/1303/1303/12800 4k (page size) jumbo clusters in use (current/cache/total/max) 0/0/0/6400 9k jumbo clusters in use (current/cache/total/max) 0/0/0/3200 16k jumbo clusters in use (current/cache/total/max) 1153K/9761K/10914K bytes allocated to network (current/cache/total) 0/0/0 requests for mbufs denied (mbufs/clusters/mbuf+clusters) 0/0/0 requests for jumbo clusters denied (4k/9k/16k) 0/8/6656 sfbufs in use (current/peak/max) 0 requests for sfbufs denied 0 requests for sfbufs delayed 0 requests for I/O initiated by sendfile 0 calls to protocol drain routines Anyone got an idea what might be the possible cause?

Read the article

Windows periodically disconnects, reconnects to the network

- by einpoklum

My setup: I have a PC with a Gigabyte GA-MA78S2H motherboard (Realtek Gigabit wired Ethernet on-board). I have the latest drivers (at least the latest driver for the NIC. I'm connecting via an Edimax BR-6216Mg (again, wired connection). For some reason I experience short periodic disconnects and reconnects. Specifically, Skype disconnects, tries to connect, succeeds after a short while; incoming SFTP sessions get dropped; using a browser, I sometime get stuck in the DNS lookup or connection to the website and a page won't load. A couple of seconds later, a reload works. All this happens with Windows XP SP3. With Windows 7, it also happens. (When I initially wrote this question I didn't notice it.) ipconfig for my adapter: Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Realtek PCIe GBE Family Controller Physical Address. . . . . . . . . : 00-1D-7D-E9-72-9E Dhcp Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IP Address. . . . . . . . . . . . : 192.168.0.2 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.0.254 DHCP Server . . . . . . . . . . . : 192.168.0.254 DNS Servers . . . . . . . . . . . : 192.117.235.235 62.219.186.7 Lease Obtained. . . . . . . . . . : Saturday, March 10, 2012 8:28:20 AM Lease Expires . . . . . . . . . . : Friday, January 26, 1906 2:00:04 AM A result of some tests a couple of the disconnects: C:\Documents and Settings\eyalroz.BAKNUNIN>nslookup google.com DNS request timed out. timeout was 2 seconds. *** Can't find server name for address 192.117.235.235: Timed out DNS request timed out. timeout was 2 seconds. *** Can't find server name for address 62.219.186.7: Timed out *** Default servers are not available Server: UnKnown Address: 192.117.235.235 DNS request timed out. timeout was 2 seconds. DNS request timed out. timeout was 2 seconds. *** Request to UnKnown timed-out C:\Documents and Settings\eyalroz.BAKNUNIN>ping 194.90.1.5 Pinging 194.90.1.5 with 32 bytes of data: Control-C ^C C:\Documents and Settings\eyalroz.BAKNUNIN>tracert -d 194.90.1.5 Tracing route to 194.90.1.5 over a maximum of 30 hops 1 <1 ms <1 ms <1 ms 192.168.0.254 2 * * 11 ms 10.168.128.1 3 14 ms 13 ms 14 ms 212.179.160.142 4 * * * Request timed out. 5 * * * Request timed out. 6 * * 47 ms 62.219.189.169 7 31 ms 27 ms 32 ms 62.219.189.150 8 15 ms 14 ms 16 ms 192.114.65.202 9 15 ms 15 ms 11 ms 212.143.10.66 10 13 ms 29 ms 31 ms 212.143.12.234 11 35 ms 15 ms 18 ms 212.143.8.72 12 22 ms 22 ms 16 ms 194.90.1.5 I usually ping 194.90.1.5 (which is not at my ISP) with 15ms response time and no losses. Things I've done/tried: [2012-03-26] I replaced the cable; I thought that made a difference, but the disconnects were back a while later, so that wasn't it. Updated the NIC driver. Tried reducing the MTU (used a utility called Dr. TCP); there was no effect. I updated my board BIOS revision (which caused all the HW to be "reinstalled" or re-identified - successfully). I installed another NIC, and tried switching to it - same effect with the on-board NIC. A while back I tried another router (although it was an Edimax model) - same problem. Connected the computer directly, with no router. Same problem. ping -t to the router (192.168.0.254) gives pongs, nothing is lost, and time is < 1 ms almost always (sometimes it says 1 or 2 ms). This is the case also during the disconnects.

Read the article

puma init.d for centos 6 fails with runuser: user /var/log/puma.log does not exist

- by Rubytastic

Trying to get a init.d/puma to work on Centos 6. It throws error runuser: user /var/log/puma.log does not exist I run this from the /srv/books/current folder but it fails. I tried to debug the values but not quite get what is missing and why it throws this error. #! /bin/sh # puma - this script starts and stops the puma daemon # # chkconfig: - 85 15 # description: Puma # processname: puma # config: /etc/puma.conf # pidfile: /srv/books/current/tmp/pids/puma.pid # Author: Darío Javier Cravero <[email protected]> # # Do NOT "set -e" # Original script https://github.com/puma/puma/blob/master/tools/jungle/puma # It was modified here by Stanislaw Pankevich <[email protected]> # to run on CentOS 5.5 boxes. # Script works perfectly on CentOS 5: script uses its native daemon(). # Puma is being stopped/restarted by sending signals, control app is not used. # Source function library. . /etc/rc.d/init.d/functions # Source networking configuration. . /etc/sysconfig/network # Check that networking is up. [ "$NETWORKING" = "no" ] && exit 0 # PATH should only include /usr/* if it runs after the mountnfs.sh script PATH=/usr/local/bin:/usr/local/sbin/:/sbin:/usr/sbin:/bin:/usr/bin DESC="Puma rack web server" NAME=puma DAEMON=$NAME SCRIPTNAME=/etc/init.d/$NAME CONFIG=/etc/puma.conf JUNGLE=`cat $CONFIG` RUNPUMA=/usr/local/bin/run-puma # Skipping the following non-CentOS string # Load the VERBOSE setting and other rcS variables # . /lib/init/vars.sh # CentOS does not have these functions natively log_daemon_msg() { echo "$@"; } log_end_msg() { [ $1 -eq 0 ] && RES=OK; logger ${RES:=FAIL}; } # Define LSB log_* functions. # Depend on lsb-base (>= 3.0-6) to ensure that this file is present. . /lib/lsb/init-functions # # Function that performs a clean up of puma.* files # cleanup() { echo "Cleaning up puma temporary files..." echo $1; PIDFILE=$1/tmp/puma/puma.pid STATEFILE=$1/tmp/puma/puma.state SOCKFILE=$1/tmp/puma/puma.sock rm -f $PIDFILE $STATEFILE $SOCKFILE } # # Function that starts the jungle # do_start() { log_daemon_msg "=> Running the jungle..." for i in $JUNGLE; do dir=`echo $i | cut -d , -f 1` user=`echo $i | cut -d , -f 2` config_file=`echo $i | cut -d , -f 3` if [ "$config_file" = "" ]; then config_file="$dir/puma/config.rb" fi log_file=`echo $i | cut -d , -f 4` if [ "$log_file" = "" ]; then log_file="$dir/puma/puma.log" fi do_start_one $dir $user $config_file $log_file done } do_start_one() { PIDFILE=$1/puma/puma.pid if [ -e $PIDFILE ]; then PID=`cat $PIDFILE` # If the puma isn't running, run it, otherwise restart it. if [ "`ps -A -o pid= | grep -c $PID`" -eq 0 ]; then do_start_one_do $1 $2 $3 $4 else do_restart_one $1 fi else do_start_one_do $1 $2 $3 $4 fi } do_start_one_do() { log_daemon_msg "--> Woke up puma $1" log_daemon_msg "user $2" log_daemon_msg "log to $4" cleanup $1; daemon --user $2 $RUNPUMA $1 $3 $4 } # # Function that stops the jungle # do_stop() { log_daemon_msg "=> Putting all the beasts to bed..." for i in $JUNGLE; do dir=`echo $i | cut -d , -f 1` do_stop_one $dir done } # # Function that stops the daemon/service # do_stop_one() { log_daemon_msg "--> Stopping $1" PIDFILE=$1/tmp/puma/puma.pid STATEFILE=$1/tmp/puma/puma.state echo $PIDFILE if [ -e $PIDFILE ]; then PID=`cat $PIDFILE` echo "Pid:" echo $PID if [ "`ps -A -o pid= | grep -c $PID`" -eq 0 ]; then log_daemon_msg "---> Puma $1 isn't running." else log_daemon_msg "---> About to kill PID `cat $PIDFILE`" # pumactl --state $STATEFILE stop # Many daemons don't delete their pidfiles when they exit. kill -9 $PID fi cleanup $1 else log_daemon_msg "---> No puma here..." fi return 0 } # # Function that restarts the jungle # do_restart() { for i in $JUNGLE; do dir=`echo $i | cut -d , -f 1` do_restart_one $dir done } # # Function that sends a SIGUSR2 to the daemon/service # do_restart_one() { PIDFILE=$1/tmp/puma/puma.pid i=`grep $1 $CONFIG` dir=`echo $i | cut -d , -f 1` if [ -e $PIDFILE ]; then log_daemon_msg "--> About to restart puma $1" # pumactl --state $dir/tmp/puma/state restart kill -s USR2 `cat $PIDFILE` # TODO Check if process exist else log_daemon_msg "--> Your puma was never playing... Let's get it out there first" user=`echo $i | cut -d , -f 2` config_file=`echo $i | cut -d , -f 3` if [ "$config_file" = "" ]; then config_file="$dir/config/puma.rb" fi log_file=`echo $i | cut -d , -f 4` if [ "$log_file" = "" ]; then log_file="$dir/log/puma.log" fi do_start_one $dir $user $config_file $log_file fi return 0 } # # Function that statuss then jungle # do_status() { for i in $JUNGLE; do dir=`echo $i | cut -d , -f 1` do_status_one $dir done } # # Function that sends a SIGUSR2 to the daemon/service # do_status_one() { PIDFILE=$1/tmp/puma/pid i=`grep $1 $CONFIG` dir=`echo $i | cut -d , -f 1` if [ -e $PIDFILE ]; then log_daemon_msg "--> About to status puma $1" pumactl --state $dir/tmp/puma/state stats # kill -s USR2 `cat $PIDFILE` # TODO Check if process exist else log_daemon_msg "--> $1 isn't there :(..." fi return 0 } do_add() { str="" # App's directory if [ -d "$1" ]; then if [ "`grep -c "^$1" $CONFIG`" -eq 0 ]; then str=$1 else echo "The app is already being managed. Remove it if you want to update its config." exit 1 fi else echo "The directory $1 doesn't exist." exit 1 fi # User to run it as if [ "`grep -c "^$2:" /etc/passwd`" -eq 0 ]; then echo "The user $2 doesn't exist." exit 1 else str="$str,$2" fi # Config file if [ "$3" != "" ]; then if [ -e $3 ]; then str="$str,$3" else echo "The config file $3 doesn't exist." exit 1 fi fi # Log file if [ "$4" != "" ]; then str="$str,$4" fi # Add it to the jungle echo $str >> $CONFIG log_daemon_msg "Added a Puma to the jungle: $str. You still have to start it though." } do_remove() { if [ "`grep -c "^$1" $CONFIG`" -eq 0 ]; then echo "There's no app $1 to remove." else # Stop it first. do_stop_one $1 # Remove it from the config. sed -i "\\:^$1:d" $CONFIG log_daemon_msg "Removed a Puma from the jungle: $1." fi } case "$1" in start) [ "$VERBOSE" != no ] && log_daemon_msg "Starting $DESC" "$NAME" if [ "$#" -eq 1 ]; then do_start else i=`grep $2 $CONFIG` dir=`echo $i | cut -d , -f 1` user=`echo $i | cut -d , -f 2` config_file=`echo $i | cut -d , -f 3` if [ "$config_file" = "" ]; then config_file="$dir/config/puma.rb" fi log_file=`echo $i | cut -d , -f 4` if [ "$log_file" = "" ]; then log_file="$dir/log/puma.log" fi do_start_one $dir $user $config_file $log_file fi case "$?" in 0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;; 2) [ "$VERBOSE" != no ] && log_end_msg 1 ;; esac ;; stop) [ "$VERBOSE" != no ] && log_daemon_msg "Stopping $DESC" "$NAME" if [ "$#" -eq 1 ]; then do_stop else i=`grep $2 $CONFIG` dir=`echo $i | cut -d , -f 1` do_stop_one $dir fi case "$?" in 0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;; 2) [ "$VERBOSE" != no ] && log_end_msg 1 ;; esac ;; status) # TODO Implement. log_daemon_msg "Status $DESC" "$NAME" if [ "$#" -eq 1 ]; then do_status else i=`grep $2 $CONFIG` dir=`echo $i | cut -d , -f 1` do_status_one $dir fi case "$?" in 0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;; 2) [ "$VERBOSE" != no ] && log_end_msg 1 ;; esac ;; restart) log_daemon_msg "Restarting $DESC" "$NAME" if [ "$#" -eq 1 ]; then do_restart else i=`grep $2 $CONFIG` dir=`echo $i | cut -d , -f 1` do_restart_one $dir fi case "$?" in 0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;; 2) [ "$VERBOSE" != no ] && log_end_msg 1 ;; esac ;; add) if [ "$#" -lt 3 ]; then echo "Please, specifiy the app's directory and the user that will run it at least." echo " Usage: $SCRIPTNAME add /path/to/app user /path/to/app/config/puma.rb /path/to/app/config/log/puma.log" echo " config and log are optionals." exit 1 else do_add $2 $3 $4 $5 fi case "$?" in 0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;; 2) [ "$VERBOSE" != no ] && log_end_msg 1 ;; esac ;; remove) if [ "$#" -lt 2 ]; then echo "Please, specifiy the app's directory to remove." exit 1 else do_remove $2 fi case "$?" in 0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;; 2) [ "$VERBOSE" != no ] && log_end_msg 1 ;; esac ;; *) echo "Usage:" >&2 echo " Run the jungle: $SCRIPTNAME {start|stop|status|restart}" >&2 echo " Add a Puma: $SCRIPTNAME add /path/to/app user /path/to/app/config/puma.rb /path/to/app/config/log/puma.log" echo " config and log are optionals." echo " Remove a Puma: $SCRIPTNAME remove /path/to/app" echo " On a Puma: $SCRIPTNAME {start|stop|status|restart} PUMA-NAME" >&2 exit 3 ;; esac :

Read the article

Nginx 500 Internal Server error on subdirectory

- by juyoung518

I'm getting a 500 Internal Server error only on sub directories. For example, If my website is example.com, example.com/index.php works. But example.com/phpbb/index.php doesn't work. It just turns up a blank php page. The HTTP header shows HTTP error 500 Internal Server error. If I enter example.com/phpbb/index.php/somedirectory, the index.php of my root directory shows up. This is all very strange. I have tried searching etc but nothing worked. tried re-installing nginx but not fixed. I'm sure I got the DNS configured right. My Nginx Config /sites-available/example.com server { server_name www.example.com; return 301 https://example.com$request_uri; } server { listen 443; listen 80; #listen 80; ## listen for ipv4; this line is default and implied #listen [::]:80 default_server ipv6only=on; ## listen for ipv6 root /var/www/example.com/public_html; index index.html index.php index.htm; ssl on; ssl_certificate /etc/nginx/ssl/cert.pem; ssl_certificate_key /etc/nginx/ssl/ssl.key; ssl_session_timeout 5m; ssl_protocols TLSv1 TLSv1.1 TLSv1.2; ssl_ciphers ECDH+AESGCM:DH+AESGCM:ECDH+AES256:DH+AES256:ECDH+AES128:DH+AES:ECDH+3DES:DH+3DES:RSA+AESGCM:RSA+AES:RSA+3DES:!aNULL:!MD5:!DSS; ssl_prefer_server_ciphers on; ssl_stapling on; resolver 8.8.8.8; add_header Strict-Transport-Security max-age=63072000; # Make site accessible from http://localhost/ server_name example.com; location ~* \.(jpg|jpeg|png|gif|ico|css|js|bmp)$ { expires 365d; add_header Cache-Control public; } if ($scheme = http) { return 301 https://example.com$request_uri; } location / { # First attempt to serve request as file, then # as directory, then fall back to displaying a 404. try_files $uri $uri/ /index.php; # Uncomment to enable naxsi on this location # include /etc/nginx/naxsi.rules } if ($http_user_agent ~ (musobot|screenshot|AhrefsBot|picsearch|Gender|HostTracker|Java/1.7.0_51|Java) ) { return 403; } location /phpmyadmin { root /usr/share/; index index.php index.html index.htm; location ~ ^/phpmyadmin/(.+\.php)$ { try_files $uri =404; root /usr/share/; fastcgi_pass 127.0.0.1:9000; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; include /etc/nginx/fastcgi_params; } location ~* ^/phpmyadmin/(.+\.(jpg|jpeg|gif|css|png|js|ico|html|xml|txt))$ { root /usr/share/; } } location /phpMyAdmin { rewrite ^/* /phpmyadmin last; } location /doc/ { alias /usr/share/doc/; autoindex on; allow 127.0.0.1; allow ::1; deny all; } # Only for nginx-naxsi used with nginx-naxsi-ui : process denied requests #location /RequestDenied { # proxy_pass http://127.0.0.1:8080; #} #error_page 404 /404.html; # redirect server error pages to the static page /50x.html # error_page 500 502 503 504 /50x.html; location = /50x.html { root /usr/share/nginx/www; } # pass the PHP scripts to FastCGI server listening on 127.0.0.1:9000 # location ~ \.php$ { try_files $uri =404; fastcgi_split_path_info ^(.+\.php)(/.+)$; # NOTE: You should have "cgi.fix_pathinfo = 0;" in php.ini # With php5-cgi alone: fastcgi_pass 127.0.0.1:9000; # With php5-fpm: #fastcgi_pass unix:/var/run/php5-fpm.sock; fastcgi_index index.php; include /etc/nginx/fastcgi_params; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; fastcgi_buffer_size 128k; fastcgi_buffers 256 16k; fastcgi_busy_buffers_size 256k; fastcgi_temp_file_write_size 256k; fastcgi_read_timeout 240; # deny access to .htaccess files, if Apache's document root # concurs with nginx's one # location ~ /\.ht { deny all; } } } nginx.conf user www-data; worker_processes 1; pid /var/run/nginx.pid; events { worker_connections 768; # multi_accept on; } http { ## Block spammers and other unwanted visitors ## include /etc/nginx/blockips.conf; fastcgi_cache_path /var/cache/nginx levels=1:2 keys_zone=microcache:10m max_size=1000m inactive=60m; ## # Basic Settings ## sendfile on; tcp_nopush on; tcp_nodelay on; keepalive_timeout 100; types_hash_max_size 2048; server_tokens off; # server_names_hash_bucket_size 64; # server_name_in_redirect off; include /etc/nginx/mime.types; default_type application/octet-stream; ## # Logging Settings ## access_log off; error_log /var/log/nginx/error.log; ssl_session_cache shared:SSL:10m; ssl_session_timeout 10m; ssl_ciphers ECDH+AESGCM:DH+AESGCM:ECDH+AES256:DH+AES256:ECDH+AES128:DH+AES:ECDH+3DES:DH+3DES:RSA+AESGCM:RSA+AES:RSA+3DES:!aNULL:!MD5:!DSS; ssl_prefer_server_ciphers on; ## # File Cache Settings ## open_file_cache max=5000 inactive=5m; open_file_cache_valid 2m; open_file_cache_min_uses 1; open_file_cache_errors on; ## # Gzip Settings ## gzip on; gzip_disable "msie6"; gzip_vary on; gzip_proxied any; gzip_comp_level 6; gzip_buffers 16 8k; gzip_http_version 1.1; gzip_types text/plain text/x-js text/css application/json application/x-javascript text/xml application/xml application/xml+rss text/javascript; ## # nginx-naxsi config ## # Uncomment it if you installed nginx-naxsi ## #include /etc/nginx/naxsi_core.rules; ## # nginx-passenger config ## # Uncomment it if you installed nginx-passenger ## #passenger_root /usr; #passenger_ruby /usr/bin/ruby; ## # Virtual Host Configs ## include /etc/nginx/conf.d/*.conf; include /etc/nginx/sites-enabled/*;

Read the article

cannot access localhost using ip

- by Robert

I have done a small web development project using eclipse. It runs well when I try running it on browser with url localhost:8080/myproject/home.html. But if I want to access it on another machine (laptop, mobile, etc. using the same wifi) it is not possible; it is not able to connect. After Googling for a while found out that I have to use the IP address instead of 'localhost'. So I tried 10.0.0.4:8080/myproject/home.html, but still does not work. In fact i am unable to open that url on the same machine (where localhost:8080/myproject/home.html works fine). I also added a new Inbound rule in control panel firewall settings, allowing access to all ports for protocol TCP. Still have problem in running application with the url 10.0.0.4:8080/myproject/home.html (both on same machine as well as laptop and mobile). FYI i am using Eclipse Indigo, Apache tomcat 6.0 and server.xml file contents is as below: <?xml version="1.0" encoding="UTF-8"?> <Server port="8005" shutdown="SHUTDOWN">  <Listener SSLEngine="on" className="org.apache.catalina.core.AprLifecycleListener"/>  <Listener className="org.apache.catalina.core.JasperListener"/>  <Listener className="org.apache.catalina.core.JreMemoryLeakPreventionListener"/>  <Listener className="org.apache.catalina.mbeans.ServerLifecycleListener"/> <Listener className="org.apache.catalina.mbeans.GlobalResourcesLifecycleListener"/>  <GlobalNamingResources>  <Resource auth="Container" description="User database that can be updated and saved" factory="org.apache.catalina.users.MemoryUserDatabaseFactory" name="UserDatabase" pathname="conf/tomcat-users.xml" type="org.apache.catalina.UserDatabase"/> </GlobalNamingResources>  <Service name="Catalina">    <Connector port="8080" protocol="HTTP/1.1" address="10.0.0.4" connectionTimeout="20000" redirectPort="8443" />      <Connector port="8009" protocol="AJP/1.3" redirectPort="8443"/>   <Engine defaultHost="localhost" name="Catalina">      <Realm className="org.apache.catalina.realm.UserDatabaseRealm" resourceName="UserDatabase"/>  <Host appBase="webapps" autoDeploy="true" name="localhost" unpackWARs="true" xmlNamespaceAware="false" xmlValidation="false">     <Context docBase="myproject" path="/myproject" reloadable="true" source="org.eclipse.jst.jee.server:myproject"/></Host> </Engine> </Service> </Server>

Read the article

DNS resolution problems; dig SERVFAIL error

- by JustinP

I'm setting up a couple of dedicated servers, and having problems setting up my nameservers properly. One of these is a LEMP server (LAMP with nginx in place of Apache), and the other will function solely as an email server, running exim/dovecot/ASSP antispam (no Apache). The LEMP server is CentOS 5.5, with no control panel, while the email server is CentOS 5.5 as well, with cPanel/WHM. So, I've had problems getting DNS set up properly. I have two domains, each one pointing to one of these servers. The nameservers are registered correctly with the domain registrar, and the nameserver IPs are entered correctly as well. I've spoken to tech support at the registrar and they confirm that everything is set up on their end. Not knowing much about DNS, I googled nameservers and DNS until I nearly went blind, and spent hours messing with the configuration. Eventually, I got the LEMP server's DNS working properly (no cPanel). Pleased with this triumph, I'm trying to mimic that configuration and repeat the process with the email server, and it's just not happening. The nameserver starts and stops, but the domain doesn't resolve. Things I have tried Going through standard procedures to set up DNS in WHM Clearing all DNS information, uninstalling BIND, then reinstalling all of that and again going through WHM procedures for setting up DNS Clearing all DNS information, and setting up BIND via shell (completely outside of cPanel) by using my config and zone files from the LEMP server as a template named runs just fine, but nothing is resolving. When I "dig any example.com" I get a SERVFAIL message. Nslookups return no information. Here are my config and zone files. named.conf controls { inet 127.0.0.1 allow { localhost; } keys { coretext-key; }; }; options { listen-on port 53 { any; }; listen-on-v6 port 53 { ::1; }; directory "/var/named"; dump-file "/var/named/data/cache_dump.db"; statistics-file "/var/named/data/named_stats.txt"; memstatistics-file "/var/named/data/named_mem_stats.txt"; // Those options should be used carefully because they disable port // randomization // query-source port 53; // query-source-v6 port 53; allow-query { any; }; allow-query-cache { any; }; }; logging { channel default_debug { file "data/named.run"; severity dynamic; }; }; view "localhost_resolver" { match-clients { 127.0.0.0/24; }; match-destinations { localhost; }; recursion yes; //zone "." IN { // type hint; // file "/var/named/named.ca"; //}; include "/etc/named.rfc1912.zones"; }; view "internal" { /* This view will contain zones you want to serve only to "internal" clients that connect via your directly attached LAN interfaces - "localnets" . */ match-clients { localnets; }; match-destinations { localnets; }; recursion yes; zone "." IN { type hint; file "/var/named/named.ca"; }; // include "/var/named/named.rfc1912.zones"; // you should not serve your rfc1912 names to non-localhost clients. // These are your "authoritative" internal zones, and would probably // also be included in the "localhost_resolver" view above : zone "example.com" { type master; file "data/db.example.com"; }; zone "3.2.1.in-addr.arpa" { type master; file "data/db.1.2.3"; }; }; view "external" { /* This view will contain zones you want to serve only to "external" clients * that have addresses that are not on your directly attached LAN interface subnets: */ match-clients { any; }; match-destinations { any; }; recursion no; // you'd probably want to deny recursion to external clients, so you don't // end up providing free DNS service to all takers allow-query-cache { none; }; // Disable lookups for any cached data and root hints // all views must contain the root hints zone: //include "/etc/named.rfc1912.zones"; zone "." IN { type hint; file "/var/named/named.ca"; }; zone "example.com" { type master; file "data/db.example.com"; }; zone "3.2.1.in-addr.arpa" { type master; file "data/db.1.2.3"; }; }; include "/etc/rndc.key"; db.example.com $TTL 1D ; ; Zone file for example.com ; ; Mandatory minimum for a working domain ; @ IN SOA ns1.example.com. contact.example.com. ( 2011042905 ; serial 8H ; refresh 2H ; retry 4W ; expire 1D ; default_ttl ) NS ns1.example.com. NS ns2.example.com. ns1 A 1.2.3.4 ns2 A 1.2.3.5 example.com. A 1.2.3.4 localhost A 127.0.0.1 www CNAME example.com. mail CNAME example.com. ; db.1.2.3 $TTL 1D $ORIGIN 3.2.1.in-addr.arpa. @ IN SOA ns1.example.com contact.example.com. ( 2011042908 ; 8H ; 2H ; 4W ; 1D ; ) NS ns1.example.com. NS ns2.example.com. 4 PTR hostname.example.com. 5 PTR hostname.example.com. ; Also of note: both of these servers are managed. Tech support is very responsive, and largely useless. Hours go by with them asking me questions to narrow down what could be wrong, then they pass the ticket to the tech on the next shift, who ignores everything that's happened already and spend his whole shift asking all the same questions the last guy asked. So, in summary: *Nameservers, with IPs, are correctly registered with domain registrar *named is configured and running *...and must not be configured correctly, because nothing resolves. Any help would be great. I changed domains and IPs in the files to generics, but let me know if you need to know the domain in question. Thanks! UPDATE I found that I didn't have 127.0.0.1 in /etc/resolv.conf, so I added it, along with my two public IPs that I have named listening on. resolv.conf search www.example.com example.com nameserver 127.0.0.1 nameserver 7.8.9.10 ;Was in here by default, authoritative nameserver of hosting company nameserver 1.2.3.4 ;Public IP #1 nameserver 1.2.3.5 ;Public IP #2 Now when I DIG example.com from the host, it resolves. If I try to DIG from my other server (in the same datacenter), or from the internet, it times out or I get SERVFAIL.

Read the article

Why is Varnish not caching?

- by Justin

I am troubleshooting the setup of Varnish 3.x on my Ubuntu server. I'm running Drupal 7 on two sites set up on the box, via named-based vhosts. Before trying to get Varnish to play nice with Drupal I'm trying to just get Varnish to a PNG from cache. Here are the headers I get from a curl -I request of the PNG file: HTTP/1.1 200 OK Server: Apache/2.2.22 (Ubuntu) Last-Modified: Sun, 07 Oct 2012 21:18:59 GMT ETag: "a57c2-3850-4cb7ea73db6c0" Accept-Ranges: bytes Content-Length: 14416 Cache-Control: max-age=1209600 Expires: Thu, 25 Oct 2012 22:55:14 GMT Content-Type: image/png Accept-Ranges: bytes Date: Thu, 11 Oct 2012 22:55:14 GMT X-Varnish: 1766703058 Age: 0 Via: 1.1 varnish Connection: keep-alive X-Varnish-Cache: MISS Here is the Varnish VCL file I'm using (It's a default VCL configuration designed for Drupal): # Default backend definition. Set this to point to your content # server. # backend default { .host = "127.0.0.1"; .port = "8080"; } # Respond to incoming requests. sub vcl_recv { # Use anonymous, cached pages if all backends are down. if (!req.backend.healthy) { unset req.http.Cookie; } # Allow the backend to serve up stale content if it is responding slowly. set req.grace = 6h; # Pipe these paths directly to Apache for streaming. #if (req.url ~ "^/admin/content/backup_migrate/export") { # return (pipe); #} # Do not cache these paths. if (req.url ~ "^/status\.php$" || req.url ~ "^/update\.php$" || req.url ~ "^/admin$" || req.url ~ "^/admin/.*$" || req.url ~ "^/flag/.*$" || req.url ~ "^.*/ajax/.*$" || req.url ~ "^.*/ahah/.*$") { return (pass); } # Do not allow outside access to cron.php or install.php. #if (req.url ~ "^/(cron|install)\.php$" && !client.ip ~ internal) { # Have Varnish throw the error directly. # error 404 "Page not found."; # Use a custom error page that you've defined in Drupal at the path "404". # set req.url = "/404"; #} # Always cache the following file types for all users. This list of extensions # appears twice, once here and again in vcl_fetch so make sure you edit both # and keep them equal. if (req.url ~ "(?i)\.(pdf|asc|dat|txt|doc|xls|ppt|tgz|csv|png|gif|jpeg|jpg|ico|swf|css|js)(\?.*)?$") { unset req.http.Cookie; } # Remove all cookies that Drupal doesn't need to know about. We explicitly # list the ones that Drupal does need, the SESS and NO_CACHE. If, after # running this code we find that either of these two cookies remains, we # will pass as the page cannot be cached. if (req.http.Cookie) { # 1. Append a semi-colon to the front of the cookie string. # 2. Remove all spaces that appear after semi-colons. # 3. Match the cookies we want to keep, adding the space we removed # previously back. (\1) is first matching group in the regsuball. # 4. Remove all other cookies, identifying them by the fact that they have # no space after the preceding semi-colon. # 5. Remove all spaces and semi-colons from the beginning and end of the # cookie string. set req.http.Cookie = ";" + req.http.Cookie; set req.http.Cookie = regsuball(req.http.Cookie, "; +", ";"); set req.http.Cookie = regsuball(req.http.Cookie, ";(SESS[a-z0-9]+|SSESS[a-z0-9]+|NO_CACHE)=", "; \1="); set req.http.Cookie = regsuball(req.http.Cookie, ";[^ ][^;]*", ""); set req.http.Cookie = regsuball(req.http.Cookie, "^[; ]+|[; ]+$", ""); if (req.http.Cookie == "") { # If there are no remaining cookies, remove the cookie header. If there # aren't any cookie headers, Varnish's default behavior will be to cache # the page. unset req.http.Cookie; } else { # If there is any cookies left (a session or NO_CACHE cookie), do not # cache the page. Pass it on to Apache directly. return (pass); } } } # Set a header to track a cache HIT/MISS. sub vcl_deliver { if (obj.hits > 0) { set resp.http.X-Varnish-Cache = "HIT"; } else { set resp.http.X-Varnish-Cache = "MISS"; } } # Code determining what to do when serving items from the Apache servers. # beresp == Back-end response from the web server. sub vcl_fetch { # We need this to cache 404s, 301s, 500s. Otherwise, depending on backend but # definitely in Drupal's case these responses are not cacheable by default. if (beresp.status == 404 || beresp.status == 301 || beresp.status == 500) { set beresp.ttl = 10m; } # Don't allow static files to set cookies. # (?i) denotes case insensitive in PCRE (perl compatible regular expressions). # This list of extensions appears twice, once here and again in vcl_recv so # make sure you edit both and keep them equal. if (req.url ~ "(?i)\.(pdf|asc|dat|txt|doc|xls|ppt|tgz|csv|png|gif|jpeg|jpg|ico|swf|css|js)(\?.*)?$") { unset beresp.http.set-cookie; } # Allow items to be stale if needed. set beresp.grace = 6h; } # In the event of an error, show friendlier messages. sub vcl_error { # Redirect to some other URL in the case of a homepage failure. #if (req.url ~ "^/?$") { # set obj.status = 302; # set obj.http.Location = "http://backup.example.com/"; #} # Otherwise redirect to the homepage, which will likely be in the cache. set obj.http.Content-Type = "text/html; charset=utf-8"; synthetic {" <html> <head> <title>Page Unavailable</title> <style> body { background: #303030; text-align: center; color: white; } #page { border: 1px solid #CCC; width: 500px; margin: 100px auto 0; padding: 30px; background: #323232; } a, a:link, a:visited { color: #CCC; } .error { color: #222; } </style> </head> <body onload="setTimeout(function() { window.location = '/' }, 5000)"> <div id="page"> <h1 class="title">Page Unavailable</h1> <p>The page you requested is temporarily unavailable.</p> <p>We're redirecting you to the <a href="/">homepage</a> in 5 seconds.</p> <div class="error">(Error "} + obj.status + " " + obj.response + {")</div> </div> </body> </html> "}; return (deliver); } I'm getting a MISS and age 0 every time. If I'm understanding correctly, this means the file isn't being returned from Varnish's cache. Is there a problem with my Varnish config?

Read the article

Problem interfacing GSM USB modem to Java application

- by varun

I am working on an open-source application called FrontlineSMS which can be interfaced with GSM modems to send and receive SMS. The windows installer that is available through their website works fine. Since i wanted to modify it, I got the source code and built the jar and tried to launch it. When I plug in the GSM modem and launch the application, it sometimes detects the GSM device and i am even able to send and receive SMS. Or else 1.) I get the following error- Launching FrontlineSMS for Windows... Stable Library ========================================= Native lib Version = RXTX-2.1-7 Java lib Version = RXTX-2.1-7 Error 0x5 at /home/bob/foo/rxtx-devel/build/../src/termios.c(860): Access is de ied. Error 0x57 at /home/bob/foo/rxtx-devel/build/../src/termios.c(2352): The parame er is incorrect. Error 0x57 at /home/bob/foo/rxtx-devel/build/../src/termios.c(2352): The parame er is incorrect. Error 0x57 at /home/bob/foo/rxtx-devel/build/../src/termios.c(2352): The parame er is incorrect. Error 0x57 at /home/bob/foo/rxtx-devel/build/../src/termios.c(2352): The parame er is incorrect. Error 0x57 at /home/bob/foo/rxtx-devel/build/../src/termios.c(2352): The parame er is incorrect. Error 0x57 at /home/bob/foo/rxtx-devel/build/../src/termios.c(2352): The parame er is incorrect. Error 0x57 at /home/bob/foo/rxtx-devel/build/../src/termios.c(2352): The parame er is incorrect. Error 0x57 at /home/bob/foo/rxtx-devel/build/../src/termios.c(2352): The parame er is incorrect. Error 0x57 at /home/bob/foo/rxtx-devel/build/../src/termios.c(2352): The parame er is incorrect. Error 0x57 at /home/bob/foo/rxtx-devel/build/../src/termios.c(2352): The parame er is incorrect. Error 0x5 at /home/bob/foo/rxtx-devel/build/../src/termios.c(860): Access is de ied. Error 0x57 at /home/bob/foo/rxtx-devel/build/../src/termios.c(2352): The parame er is incorrect. Error 0x57 at /home/bob/foo/rxtx-devel/build/../src/termios.c(2352): The parame er is incorrect. Error 0x57 at /home/bob/foo/rxtx-devel/build/../src/termios.c(2352): The parame er is incorrect. Error 0x57 at /home/bob/foo/rxtx-devel/build/../src/termios.c(2352): The parame er is incorrect. Error 0x57 at /home/bob/foo/rxtx-devel/build/../src/termios.c(2352): The parame er is incorrect. Error 0x57 at /home/bob/foo/rxtx-devel/build/../src/termios.c(2352): The parame er is incorrect. Error 0x57 at /home/bob/foo/rxtx-devel/build/../src/termios.c(2352): The parame er is incorrect. Error 0x1 at /home/bob/foo/rxtx-devel/build/../src/termios.c(2497): Incorrect f nction. Error 0x1 at /home/bob/foo/rxtx-devel/build/../src/termios.c(2497): Incorrect f nction. Error 0x1 at /home/bob/foo/rxtx-devel/build/../src/termios.c(2497): Incorrect f nction. Error 0x1 at /home/bob/foo/rxtx-devel/build/../src/termios.c(2497): Incorrect f nction. Error 0x1 at /home/bob/foo/rxtx-devel/build/../src/termios.c(2497): Incorrect f nction. Error 0x1 at /home/bob/foo/rxtx-devel/build/../src/termios.c(2497): Incorrect f nction. Error 0x1 at /home/bob/foo/rxtx-devel/build/../src/termios.c(2497): Incorrect f nction. 2.) OR the application sometimes crashes by creating a log file which contains: # # A fatal error has been detected by the Java Runtime Environment: # # EXCEPTION_ACCESS_VIOLATION (0xc0000005) at pc=0x10009ccb, pid=4452, tid=3464 # # JRE version: 6.0_20-b02 # Java VM: Java HotSpot(TM) Client VM (16.3-b01 mixed mode, sharing windows-x86 ) # Problematic frame: # C [rxtxSerial.dll+0x9ccb] # # If you would like to submit a bug report, please visit: # http://java.sun.com/webapps/bugreport/crash.jsp # The crash happened outside the Java Virtual Machine in native code. # See problematic frame for where to report the bug. # --------------- T H R E A D --------------- Current thread (0x03433000): JavaThread "SmsModem :: COM18" daemon [_thread_in_native, id=3464, stack(0x070a0000,0x070f0000)] siginfo: ExceptionCode=0xc0000005, writing address 0x038cfa10 Registers: EAX=0x038cfa08, EBX=0x00000003, ECX=0x7c802413, EDX=0x00000001 ESP=0x070ef800, EBP=0x070ef9e8, ESI=0x3360b898, EDI=0x03433000 EIP=0x10009ccb, EFLAGS=0x00010202 Top of Stack: (sp=0x070ef800) 0x070ef800: 3360b8a0 6d9fbc40 6da2ed98 ffffffff 0x070ef810: 070ef848 6d8f0a2c 6d8f0340 070ef95c 0x070ef820: 070ef864 00000dfb 03433000 038cfa08 0x070ef830: 00000007 00000001 00000001 0000000a 0x070ef840: 03433bf4 fffffffe 070ef8f4 6d8f0b7a 0x070ef850: 070ef95c 03433bf8 6da6f210 6da6f538 0x070ef860: 070ef868 03433bf4 27f18708 27f18708 0x070ef870: 22eb9810 03433bc4 00000001 070ef898 Instructions: (pc=0x10009ccb) 0x10009cbb: 45 1c 7c 19 8b 85 44 fe ff ff 8b 95 4c fe ff ff 0x10009ccb: 89 50 08 8b 55 f4 89 d0 e9 f8 01 00 00 c7 85 50 Stack: [0x070a0000,0x070f0000], sp=0x070ef800, free space=13e070ef334k Native frames: (J=compiled Java code, j=interpreted, Vv=VM code, C=native code) C [rxtxSerial.dll+0x9ccb] C [rxtxSerial.dll+0xa05e] j gnu.io.RXTXPort.readByte()I+0 j gnu.io.RXTXPort$SerialInputStream.read()I+61 j org.smslib.CSerialDriver.getResponse()Ljava/lang/String;+36 j net.frontlinesms.smsdevice.SmsModem._doDetection()Z+172 j net.frontlinesms.smsdevice.SmsModem.run()V+18 v ~StubRoutines::call_stub V [jvm.dll+0xf049c] V [jvm.dll+0x17fcf1] V [jvm.dll+0xf0667] V [jvm.dll+0xf06dd] V [jvm.dll+0x11a2a0] V [jvm.dll+0x1ddb14] V [jvm.dll+0x17f96c] C [msvcr71.dll+0x9565] C [kernel32.dll+0xb729] Java frames: (J=compiled Java code, j=interpreted, Vv=VM code) j gnu.io.RXTXPort.readByte()I+0 j gnu.io.RXTXPort$SerialInputStream.read()I+61 j org.smslib.CSerialDriver.getResponse()Ljava/lang/String;+36 j net.frontlinesms.smsdevice.SmsModem._doDetection()Z+172 j net.frontlinesms.smsdevice.SmsModem.run()V+18 v ~StubRoutines::call_stub --------------- P R O C E S S --------------- Java Threads: ( => current thread ) =>0x03433000 JavaThread "SmsModem :: COM18" daemon [_thread_in_native, id=3464, stack(0x070a0000,0x070f0000)] 0x0344b800 JavaThread "D3D Screen Updater" daemon [_thread_blocked, id=4404, stack(0x03dd0000,0x03e20000)] 0x002b7800 JavaThread "DestroyJavaVM" [_thread_blocked, id=3236, stack(0x008c0000,0x00910000)] 0x03f6f400 JavaThread "AWT-EventQueue-0" [_thread_blocked, id=1888, stack(0x038e0000,0x03930000)] 0x03ec2400 JavaThread "AWT-Shutdown" [_thread_blocked, id=4300, stack(0x03740000,0x03790000)] 0x032d8c00 JavaThread "EmailServerHandler" [_thread_blocked, id=5708, stack(0x03830000,0x03880000)] 0x032f7000 JavaThread "Incoming message processor" [_thread_blocked, id=4184, stack(0x03650000,0x036a0000)] 0x03004c00 JavaThread "AWT-Windows" daemon [_thread_in_native, id=4828, stack(0x035a0000,0x035f0000)] 0x0303f400 JavaThread "Java2D Disposer" daemon [_thread_blocked, id=3768, stack(0x03500000,0x03550000)] 0x02b1e800 JavaThread "Low Memory Detector" daemon [_thread_blocked, id=4164, stack(0x02dd0000,0x02e20000)] 0x02b18c00 JavaThread "CompilerThread0" daemon [_thread_blocked, id=2936, stack(0x02d80000,0x02dd0000)] 0x02b17400 JavaThread "Attach Listener" daemon [_thread_blocked, id=5444, stack(0x02d30000,0x02d80000)] 0x02b15c00 JavaThread "Signal Dispatcher" daemon [_thread_blocked, id=4976, stack(0x02ce0000,0x02d30000)] 0x02b0d800 JavaThread "Finalizer" daemon [_thread_blocked, id=5876, stack(0x02c90000,0x02ce0000)] 0x02b0c400 JavaThread "Reference Handler" daemon [_thread_blocked, id=5984, stack(0x02c40000,0x02c90000)] Other Threads: 0x02b0ac00 VMThread [stack: 0x02bf0000,0x02c40000] [id=4508] 0x02b29800 WatcherThread [stack: 0x02e20000,0x02e70000] [id=6080] VM state:not at safepoint (normal execution) VM Mutex/Monitor currently owned by a thread: None Heap def new generation total 7808K, used 4003K [0x22990000, 0x23200000, 0x27ee0000) eden space 6976K, 45% used [0x22990000, 0x22ca8e90, 0x23060000) from space 832K, 100% used [0x23060000, 0x23130000, 0x23130000) to space 832K, 0% used [0x23130000, 0x23130000, 0x23200000) tenured generation total 17208K, used 15192K [0x27ee0000, 0x28fae000, 0x32990000) the space 17208K, 88% used [0x27ee0000, 0x28db6100, 0x28db6200, 0x28fae000) compacting perm gen total 13824K, used 13655K [0x32990000, 0x33710000, 0x36990000) the space 13824K, 98% used [0x32990000, 0x336e5f98, 0x336e6000, 0x33710000) ro space 10240K, 51% used [0x36990000, 0x36ebae00, 0x36ebae00, 0x37390000) rw space 12288K, 54% used [0x37390000, 0x37a272d8, 0x37a27400, 0x37f90000) Dynamic libraries: 0x00400000 - 0x00424000 C:\WINDOWS\system32\java.exe 0x7c900000 - 0x7c9b2000 C:\WINDOWS\system32\ntdll.dll 0x7c800000 - 0x7c8f6000 C:\WINDOWS\system32\kernel32.dll 0x77dd0000 - 0x77e6b000 C:\WINDOWS\system32\ADVAPI32.dll 0x77e70000 - 0x77f02000 C:\WINDOWS\system32\RPCRT4.dll 0x77fe0000 - 0x77ff1000 C:\WINDOWS\system32\Secur32.dll 0x7c340000 - 0x7c396000 C:\Program Files\Java\jre6\bin\msvcr71.dll 0x6d800000 - 0x6da97000 C:\Program Files\Java\jre6\bin\client\jvm.dll 0x7e410000 - 0x7e4a1000 C:\WINDOWS\system32\USER32.dll 0x77f10000 - 0x77f59000 C:\WINDOWS\system32\GDI32.dll 0x76b40000 - 0x76b6d000 C:\WINDOWS\system32\WINMM.dll 0x76390000 - 0x763ad000 C:\WINDOWS\system32\IMM32.DLL 0x6d7b0000 - 0x6d7bc000 C:\Program Files\Java\jre6\bin\verify.dll 0x6d330000 - 0x6d34f000 C:\Program Files\Java\jre6\bin\java.dll 0x6d290000 - 0x6d298000 C:\Program Files\Java\jre6\bin\hpi.dll 0x76bf0000 - 0x76bfb000 C:\WINDOWS\system32\PSAPI.DLL 0x6d7f0000 - 0x6d7ff000 C:\Program Files\Java\jre6\bin\zip.dll 0x6d000000 - 0x6d14a000 C:\Program Files\Java\jre6\bin\awt.dll 0x73000000 - 0x73026000 C:\WINDOWS\system32\WINSPOOL.DRV 0x77c10000 - 0x77c68000 C:\WINDOWS\system32\msvcrt.dll 0x774e0000 - 0x7761d000 C:\WINDOWS\system32\ole32.dll 0x773d0000 - 0x774d3000 C:\WINDOWS\WinSxS\x86_Microsoft.Windows.Common-Controls_6595b64144ccf1df_6.0.2600.5512_x-ww_35d4ce83\COMCTL32.dll 0x77f60000 - 0x77fd6000 C:\WINDOWS\system32\SHLWAPI.dll 0x5ad70000 - 0x5ada8000 C:\WINDOWS\system32\uxtheme.dll 0x74720000 - 0x7476c000 C:\WINDOWS\system32\MSCTF.dll 0x755c0000 - 0x755ee000 C:\WINDOWS\system32\msctfime.ime 0x7c9c0000 - 0x7d1d7000 C:\WINDOWS\system32\shell32.dll 0x6d230000 - 0x6d284000 C:\Program Files\Java\jre6\bin\fontmanager.dll 0x68000000 - 0x68036000 C:\WINDOWS\system32\rsaenh.dll 0x769c0000 - 0x76a74000 C:\WINDOWS\system32\USERENV.dll 0x5b860000 - 0x5b8b5000 C:\WINDOWS\system32\netapi32.dll 0x6d610000 - 0x6d623000 C:\Program Files\Java\jre6\bin\net.dll 0x71ab0000 - 0x71ac7000 C:\WINDOWS\system32\WS2_32.dll 0x71aa0000 - 0x71aa8000 C:\WINDOWS\system32\WS2HELP.dll 0x71a50000 - 0x71a8f000 C:\WINDOWS\System32\mswsock.dll 0x76f20000 - 0x76f47000 C:\WINDOWS\system32\DNSAPI.dll 0x76fb0000 - 0x76fb8000 C:\WINDOWS\System32\winrnr.dll 0x76f60000 - 0x76f8c000 C:\WINDOWS\system32\WLDAP32.dll 0x16080000 - 0x160a5000 C:\Program Files\Bonjour\mdnsNSP.dll 0x76d60000 - 0x76d79000 C:\WINDOWS\system32\Iphlpapi.dll 0x63560000 - 0x63568000 C:\Program Files\National Instruments\Shared\mDNS Responder\nimdnsNSP.dll 0x63550000 - 0x63559000 C:\WINDOWS\system32\nimdnsResponder.dll 0x78130000 - 0x781cb000 C:\WINDOWS\WinSxS\x86_Microsoft.VC80.CRT_1fc8b3b9a1e18e3b_8.0.50727.4053_x-ww_e6967989\MSVCR80.dll 0x76fc0000 - 0x76fc6000 C:\WINDOWS\system32\rasadhlp.dll 0x10000000 - 0x10012000 C:\Documents and Settings\bjz677\Desktop\client run\rxtxSerial.dll 0x73d90000 - 0x73db7000 C:\WINDOWS\system32\crtdll.dll 0x4fdd0000 - 0x4ff76000 C:\WINDOWS\system32\d3d9.dll 0x038d0000 - 0x038d6000 C:\WINDOWS\system32\d3d8thk.dll 0x77c00000 - 0x77c08000 C:\WINDOWS\system32\VERSION.dll 0x6d630000 - 0x6d639000 C:\Program Files\Java\jre6\bin\nio.dll 0x03930000 - 0x03977000 C:\Program Files\Iomega\DriveIcons\IMGHOOK.DLL 0x605d0000 - 0x605d9000 C:\WINDOWS\system32\mslbui.dll 0x77120000 - 0x771ab000 C:\WINDOWS\system32\OLEAUT32.DLL VM Arguments: java_command: net.frontlinesms.DesktopLauncher Launcher Type: SUN_STANDARD Environment Variables: JAVA_HOME=C:\Program Files\Java\jdk1.6.0_20\bin CLASSPATH=.;C:\Program Files\Java\jre6\lib\ext\QTJava.zip; PATH=C:\Program Files\Intel\MKL\10.0.2.019\ia32\bin;C:\Program Files\Intel\VTune\CGGlbCache;C:\Program Files\Intel\VTune\Analyzer\Bin;C:\Program Files\Intel\VTune\Shared\Bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;s:\datamart\bin;C:\Program Files\ATI Technologies\ATI.ACE\;C:\Program Files\IVI\bin;c:\Program Files\Microsoft SQL Server\90\Tools\binn\;C:\Program Files\MATLAB\R2007b\bin;C:\Program Files\MATLAB\R2007b\bin\win32;C:\VXIPNP\WinNT\Bin;C:\Program Files\Intel\Compiler\Fortran\10.1.021\\IA32\Lib;C:\Program Files\Intel\Compiler\Fortran\10.1.021\\EM64T\Lib;C:\VXIPNP\WinNT\Bin\;C:\WINDOWS\system32\WindowsPowerShell\v1.0;C:\WINDOWS\system32\WindowsPowerShell\v1.0;C:\Program Files\QuickTime\QTSystem\;C:\Program Files\Java\jdk1.6.0_20\bin USERNAME=xxx OS=Windows_NT PROCESSOR_IDENTIFIER=x86 Family 6 Model 15 Stepping 2, GenuineIntel --------------- S Y S T E M --------------- OS: Windows XP Build 2600 Service Pack 3 CPU:total 2 (2 cores per cpu, 1 threads per core) family 6 model 15 stepping 2, cmov, cx8, fxsr, mmx, sse, sse2, sse3, ssse3 Memory: 4k page, physical 2094960k(1063364k free), swap 4032536k(3038408k free) vm_info: Java HotSpot(TM) Client VM (16.3-b01) for windows-x86 JRE (1.6.0_20-b02), built on Apr 12 2010 13:52:23 by "java_re" with MS VC++ 7.1 (VS2003) time: Wed Jun 16 11:53:40 2010 elapsed time: 45 seconds Anyone knows what caused this? Please answer keeping in mind I am new to Java. Thanks, Varun

Read the article

eventmachine on debian fails install via rubygems

- by Max

this has been killing me for the last 5 hours. I don't seem to be able to get eventmachine running on my debian box. here this output: $ gem install thin Building native extensions. This could take a while... ERROR: Error installing thin: ERROR: Failed to build gem native extension. /home/eventhub/.rvm/rubies/ruby-1.9.3-p125/bin/ruby extconf.rb checking for rb_trap_immediate in ruby.h,rubysig.h... no checking for rb_thread_blocking_region()... yes checking for inotify_init() in sys/inotify.h... yes checking for writev() in sys/uio.h... yes checking for rb_wait_for_single_fd()... yes checking for rb_enable_interrupt()... yes checking for rb_time_new()... yes checking for sys/event.h... no checking for epoll_create() in sys/epoll.h... yes creating Makefile make compiling kb.cpp cc1plus: warning: command line option "-Wdeclaration-after-statement" is valid for C/ObjC but not for C++ cc1plus: warning: command line option "-Wimplicit-function-declaration" is valid for C/ObjC but not for C++ In file included from project.h:149, from kb.cpp:20: binder.h:35: warning: type qualifiers ignored on function return type In file included from project.h:150, from kb.cpp:20: em.h:84: warning: type qualifiers ignored on function return type em.h:85: warning: type qualifiers ignored on function return type em.h:86: warning: type qualifiers ignored on function return type em.h:88: warning: type qualifiers ignored on function return type em.h:89: warning: type qualifiers ignored on function return type em.h:90: warning: type qualifiers ignored on function return type em.h:91: warning: type qualifiers ignored on function return type em.h:93: warning: type qualifiers ignored on function return type em.h:99: warning: type qualifiers ignored on function return type em.h:116: warning: type qualifiers ignored on function return type em.h:125: warning: type qualifiers ignored on function return type In file included from project.h:154, from kb.cpp:20: eventmachine.h:46: warning: type qualifiers ignored on function return type eventmachine.h:47: warning: type qualifiers ignored on function return type eventmachine.h:48: warning: type qualifiers ignored on function return type eventmachine.h:50: warning: type qualifiers ignored on function return type eventmachine.h:65: warning: type qualifiers ignored on function return type eventmachine.h:66: warning: type qualifiers ignored on function return type eventmachine.h:67: warning: type qualifiers ignored on function return type eventmachine.h:68: warning: type qualifiers ignored on function return type In file included from project.h:154, from kb.cpp:20: eventmachine.h:103: warning: type qualifiers ignored on function return type eventmachine.h:105: warning: type qualifiers ignored on function return type eventmachine.h:108: warning: type qualifiers ignored on function return type compiling rubymain.cpp cc1plus: warning: command line option "-Wdeclaration-after-statement" is valid for C/ObjC but not for C++ cc1plus: warning: command line option "-Wimplicit-function-declaration" is valid for C/ObjC but not for C++ In file included from project.h:149, from rubymain.cpp:20: binder.h:35: warning: type qualifiers ignored on function return type In file included from project.h:150, from rubymain.cpp:20: em.h:84: warning: type qualifiers ignored on function return type em.h:85: warning: type qualifiers ignored on function return type em.h:86: warning: type qualifiers ignored on function return type em.h:88: warning: type qualifiers ignored on function return type em.h:89: warning: type qualifiers ignored on function return type em.h:90: warning: type qualifiers ignored on function return type em.h:91: warning: type qualifiers ignored on function return type em.h:93: warning: type qualifiers ignored on function return type em.h:99: warning: type qualifiers ignored on function return type em.h:116: warning: type qualifiers ignored on function return type em.h:125: warning: type qualifiers ignored on function return type In file included from project.h:154, from rubymain.cpp:20: eventmachine.h:46: warning: type qualifiers ignored on function return type eventmachine.h:47: warning: type qualifiers ignored on function return type eventmachine.h:48: warning: type qualifiers ignored on function return type eventmachine.h:50: warning: type qualifiers ignored on function return type eventmachine.h:65: warning: type qualifiers ignored on function return type eventmachine.h:66: warning: type qualifiers ignored on function return type eventmachine.h:67: warning: type qualifiers ignored on function return type eventmachine.h:68: warning: type qualifiers ignored on function return type In file included from project.h:154, from rubymain.cpp:20: eventmachine.h:103: warning: type qualifiers ignored on function return type eventmachine.h:105: warning: type qualifiers ignored on function return type eventmachine.h:108: warning: type qualifiers ignored on function return type compiling ssl.cpp cc1plus: warning: command line option "-Wdeclaration-after-statement" is valid for C/ObjC but not for C++ cc1plus: warning: command line option "-Wimplicit-function-declaration" is valid for C/ObjC but not for C++ In file included from project.h:149, from ssl.cpp:23: binder.h:35: warning: type qualifiers ignored on function return type In file included from project.h:150, from ssl.cpp:23: em.h:84: warning: type qualifiers ignored on function return type em.h:85: warning: type qualifiers ignored on function return type em.h:86: warning: type qualifiers ignored on function return type em.h:88: warning: type qualifiers ignored on function return type em.h:89: warning: type qualifiers ignored on function return type em.h:90: warning: type qualifiers ignored on function return type em.h:91: warning: type qualifiers ignored on function return type em.h:93: warning: type qualifiers ignored on function return type em.h:99: warning: type qualifiers ignored on function return type em.h:116: warning: type qualifiers ignored on function return type em.h:125: warning: type qualifiers ignored on function return type In file included from project.h:154, from ssl.cpp:23: eventmachine.h:46: warning: type qualifiers ignored on function return type eventmachine.h:47: warning: type qualifiers ignored on function return type eventmachine.h:48: warning: type qualifiers ignored on function return type eventmachine.h:50: warning: type qualifiers ignored on function return type eventmachine.h:65: warning: type qualifiers ignored on function return type eventmachine.h:66: warning: type qualifiers ignored on function return type eventmachine.h:67: warning: type qualifiers ignored on function return type eventmachine.h:68: warning: type qualifiers ignored on function return type In file included from project.h:154, from ssl.cpp:23: eventmachine.h:103: warning: type qualifiers ignored on function return type eventmachine.h:105: warning: type qualifiers ignored on function return type eventmachine.h:108: warning: type qualifiers ignored on function return type compiling cmain.cpp cc1plus: warning: command line option "-Wdeclaration-after-statement" is valid for C/ObjC but not for C++ cc1plus: warning: command line option "-Wimplicit-function-declaration" is valid for C/ObjC but not for C++ In file included from project.h:149, from cmain.cpp:20: binder.h:35: warning: type qualifiers ignored on function return type In file included from project.h:150, from cmain.cpp:20: em.h:84: warning: type qualifiers ignored on function return type em.h:85: warning: type qualifiers ignored on function return type em.h:86: warning: type qualifiers ignored on function return type em.h:88: warning: type qualifiers ignored on function return type em.h:89: warning: type qualifiers ignored on function return type em.h:90: warning: type qualifiers ignored on function return type em.h:91: warning: type qualifiers ignored on function return type em.h:93: warning: type qualifiers ignored on function return type em.h:99: warning: type qualifiers ignored on function return type em.h:116: warning: type qualifiers ignored on function return type em.h:125: warning: type qualifiers ignored on function return type In file included from project.h:154, from cmain.cpp:20: eventmachine.h:46: warning: type qualifiers ignored on function return type eventmachine.h:47: warning: type qualifiers ignored on function return type eventmachine.h:48: warning: type qualifiers ignored on function return type eventmachine.h:50: warning: type qualifiers ignored on function return type eventmachine.h:65: warning: type qualifiers ignored on function return type eventmachine.h:66: warning: type qualifiers ignored on function return type eventmachine.h:67: warning: type qualifiers ignored on function return type eventmachine.h:68: warning: type qualifiers ignored on function return type In file included from project.h:154, from cmain.cpp:20: eventmachine.h:103: warning: type qualifiers ignored on function return type eventmachine.h:105: warning: type qualifiers ignored on function return type eventmachine.h:108: warning: type qualifiers ignored on function return type cmain.cpp:96: warning: type qualifiers ignored on function return type cmain.cpp:107: warning: type qualifiers ignored on function return type cmain.cpp:117: warning: type qualifiers ignored on function return type cmain.cpp:127: warning: type qualifiers ignored on function return type cmain.cpp:269: warning: type qualifiers ignored on function return type cmain.cpp:279: warning: type qualifiers ignored on function return type cmain.cpp:289: warning: type qualifiers ignored on function return type cmain.cpp:299: warning: type qualifiers ignored on function return type cmain.cpp:309: warning: type qualifiers ignored on function return type cmain.cpp:329: warning: type qualifiers ignored on function return type cmain.cpp:678: warning: type qualifiers ignored on function return type compiling em.cpp cc1plus: warning: command line option "-Wdeclaration-after-statement" is valid for C/ObjC but not for C++ cc1plus: warning: command line option "-Wimplicit-function-declaration" is valid for C/ObjC but not for C++ In file included from project.h:149, from em.cpp:23: binder.h:35: warning: type qualifiers ignored on function return type In file included from project.h:150, from em.cpp:23: em.h:84: warning: type qualifiers ignored on function return type em.h:85: warning: type qualifiers ignored on function return type em.h:86: warning: type qualifiers ignored on function return type em.h:88: warning: type qualifiers ignored on function return type em.h:89: warning: type qualifiers ignored on function return type em.h:90: warning: type qualifiers ignored on function return type em.h:91: warning: type qualifiers ignored on function return type em.h:93: warning: type qualifiers ignored on function return type em.h:99: warning: type qualifiers ignored on function return type em.h:116: warning: type qualifiers ignored on function return type em.h:125: warning: type qualifiers ignored on function return type In file included from project.h:154, from em.cpp:23: eventmachine.h:46: warning: type qualifiers ignored on function return type eventmachine.h:47: warning: type qualifiers ignored on function return type eventmachine.h:48: warning: type qualifiers ignored on function return type eventmachine.h:50: warning: type qualifiers ignored on function return type eventmachine.h:65: warning: type qualifiers ignored on function return type eventmachine.h:66: warning: type qualifiers ignored on function return type eventmachine.h:67: warning: type qualifiers ignored on function return type eventmachine.h:68: warning: type qualifiers ignored on function return type In file included from project.h:154, from em.cpp:23: eventmachine.h:103: warning: type qualifiers ignored on function return type eventmachine.h:105: warning: type qualifiers ignored on function return type eventmachine.h:108: warning: type qualifiers ignored on function return type em.cpp: In member function 'bool EventMachine_t::_RunEpollOnce()': em.cpp:578: warning: 'int rb_thread_select(int, fd_set*, fd_set*, fd_set*, timeval*)' is deprecated (declared at /home/eventhub/.rvm/rubies/ruby-1.9.3-p125/include/ruby-1.9.1/ruby/intern.h:379) em.cpp:578: warning: 'int rb_thread_select(int, fd_set*, fd_set*, fd_set*, timeval*)' is deprecated (declared at /home/eventhub/.rvm/rubies/ruby-1.9.3-p125/include/ruby-1.9.1/ruby/intern.h:379) em.cpp: In member function 'bool EventMachine_t::_RunSelectOnce()': em.cpp:974: warning: 'int rb_thread_select(int, fd_set*, fd_set*, fd_set*, timeval*)' is deprecated (declared at /home/eventhub/.rvm/rubies/ruby-1.9.3-p125/include/ruby-1.9.1/ruby/intern.h:379) em.cpp:974: warning: 'int rb_thread_select(int, fd_set*, fd_set*, fd_set*, timeval*)' is deprecated (declared at /home/eventhub/.rvm/rubies/ruby-1.9.3-p125/include/ruby-1.9.1/ruby/intern.h:379) em.cpp: At global scope: em.cpp:1057: warning: type qualifiers ignored on function return type em.cpp:1079: warning: type qualifiers ignored on function return type em.cpp:1265: warning: type qualifiers ignored on function return type em.cpp:1338: warning: type qualifiers ignored on function return type em.cpp:1510: warning: type qualifiers ignored on function return type em.cpp:1593: warning: type qualifiers ignored on function return type em.cpp:1856: warning: type qualifiers ignored on function return type em.cpp:1982: warning: type qualifiers ignored on function return type em.cpp:2046: warning: type qualifiers ignored on function return type em.cpp:2070: warning: type qualifiers ignored on function return type em.cpp:2142: warning: type qualifiers ignored on function return type em.cpp:2361: fatal error: error writing to /tmp/ccdlOK0T.s: No space left on device compilation terminated. make: *** [em.o] Error 1 Gem files will remain installed in /home/eventhub/.rvm/gems/ruby-1.9.3-p125/gems/eventmachine-1.0.1 for inspection. Results logged to /home/eventhub/.rvm/gems/ruby-1.9.3-p125/gems/eventmachine-1.0.1/ext/gem_make.out Any thoughts? I read a lot of different ways to solve this issue, but none of them worked. Thanks

Read the article

RUN FUNCTION AFTER SOMETIME IN JQUERY & AUTOMATIC SLICING OF IMAGES

- by user2697032

I am not being able to start the automatic slicing of images, it is happening only after a click, how should i modify my code so that i get to change the slicing of the images automatically. <!DOCTYPE html> <html lang="en"> <head> <title>Slicebox - 3D Image Slider</title> <meta charset="UTF-8" /> <meta http-equiv="X-UA-Compatible" content="IE=edge,chrome=1"> <meta name="viewport" content="width=device-width, initial-scale=1.0"> <meta name="description" content="Slicebox - 3D Image Slider with Fallback" /> <meta name="keywords" content="jquery, css3, 3d, webkit, fallback, slider, css3, 3d transforms, slices, rotate, box, automatic" /> <meta name="author" content="Pedro Botelho for Codrops" /> <link rel="shortcut icon" href="../favicon.ico"> <link rel="stylesheet" type="text/css" href="css/demo.css" /> <link rel="stylesheet" type="text/css" href="css/slicebox.css" /> <link rel="stylesheet" type="text/css" href="css/custom.css" /> <script type="text/javascript" src="js/modernizr.custom.46884.js"></script> </head> <body onload="funct()"> <div class="container"> <div class="codrops-top clearfix"> <a href="http://tympanus.net/Development/AutomaticImageMontage/"><span>« Previous Demo: </span>Automatic Image Montage</a> <span class="right"> <a target="_blank" href="http://www.flickr.com/photos/strupler/">Images by <strong>ND Strupler</strong></a> <a href="http://tympanus.net/codrops/?p=5657"><strong>Back to the Codrops Article</strong></a> </span> </div> <h1>Slicebox <span>A fresh 3D image slider with graceful fallback</span></h1> <div class="more"> <ul id="sb-examples"> <li>More examples:</li> <li class="selected"><a href="index.html">Example 1</a></li> <li><a href="index2.html">Example 2</a></li> <li><a href="index3.html">Example 3</a></li> <li><a href="index4.html">Example 4</a></li> </ul> </div> <div class="wrapper" id="checkthis"> <ul id="sb-slider" class="sb-slider"> <li> <a href="http://www.flickr.com/photos/strupler/2969141180" target="_blank"><img src="images/1.jpg" alt="image1"/></a> <div class="sb-description"> <h3>Creative Lifesaver</h3> </div> </li> <li> <a href="http://www.flickr.com/photos/strupler/2968268187" target="_blank"><img src="images/2.jpg" alt="image2"/></a> <div class="sb-description"> <h3>Honest Entertainer</h3> </div> </li> <li> <a href="http://www.flickr.com/photos/strupler/2968114825" target="_blank"><img src="images/3.jpg" alt="image1"/></a> <div class="sb-description"> <h3>Brave Astronaut</h3> </div> </li> <li> <a href="http://www.flickr.com/photos/strupler/2968122059" target="_blank"><img src="images/4.jpg" alt="image1"/></a> <div class="sb-description"> <h3>Affectionate Decision Maker</h3> </div> </li> <li> <a href="http://www.flickr.com/photos/strupler/2969119944" target="_blank"><img src="images/5.jpg" alt="image1"/></a> <div class="sb-description"> <h3>Faithful Investor</h3> </div> </li> <li> <a href="http://www.flickr.com/photos/strupler/2968126177" target="_blank"><img src="images/6.jpg" alt="image1"/></a> <div class="sb-description"> <h3>Groundbreaking Artist</h3> </div> </li> <li> <a href="http://www.flickr.com/photos/strupler/2968945158" target="_blank"><img src="images/7.jpg" alt="image1"/></a> <div class="sb-description"> <h3>Selfless Philantropist</h3> </div> </li> </ul> <div id="shadow" class="shadow"></div> <div id="nav-arrows" class="nav-arrows"> <a href="#x">Next</a> <a href="#y">Previous</a> </div> <div id="nav-dots" class="nav-dots"> <span class="nav-dot-current"></span> <span></span> <span></span> <span></span> <span></span> <span></span> <span></span> </div> </div> <p class="info"><strong>Example 1:</strong> Default settings</p> </div> <script type="text/javascript" src="http://ajax.googleapis.com/ajax/libs/jquery/1.8.2/jquery.min.js"></script> <script type="text/javascript" src="js/jquery.slicebox.js"></script> <script type="text/javascript"> $(function() { var Page = (function() { var $navArrows = $( '#nav-arrows' ).hide(), $navDots = $( '#nav-dots' ).hide(), $nav = $navDots.children( 'span' ), $shadow = $( '#shadow' ).hide(), slicebox = $( '#sb-slider' ).slicebox( { onReady : function() { $navArrows.show(); $navDots.show(); $shadow.show(); }, onBeforeChange : function( pos ) { $nav.removeClass( 'nav-dot-current' ); $nav.eq( pos ).addClass( 'nav-dot-current' ); } } ), init = function() { initEvents(); }, initEvents = function() { // add navigation events $navArrows.children( ':first' ).on( 'click', function() { setInterval("callme()", 1000); return false; } ); //$(function(){ //callme(); //}); function callme(){ //$('#checkit').append("callme loaded<br />"); slicebox.next(); setInterval("callme()", 1000); } $navArrows.children( ':last' ).on( 'click', function() { slicebox.previous(); return false; } ); $nav.each( function( i ) { $( this ).on( 'click', function( event ) { var $dot = $( this ); if( !slicebox.isActive() ) { $nav.removeClass( 'nav-dot-current' ); $dot.addClass( 'nav-dot-current' ); } slicebox.jump( i + 1 ); return false; } ); } ); }; return { init : init }; })(); Page.init(); }); </script> <script> // make sure the "myContainer" id in the script is the same id of the div $(document).ready(function() { slicebox.next(); $('#nav-arrows').sbslider(); // this is the piece of code that will do the magic thing }); </script> </body> </html> I am not being able to start the automatic slicing of images, it is happening only after a click, how should i modify my code so that i get to change the slicing of the images automatically.

Read the article

Installation error: INSTALL_FAILED_OLDER_SDK in eclipse

- by user3014909

I have an unexpe`ted problem with my Android project. I have a real android device with ice_cream sandwich installed. My app was working fine during the development but after I added a class to the project, I got an error: Installation error: INSTALL_FAILED_OLDER_SDK The problem is that everything is good in the manifest file. The minSdkversion is 8. Here is my manifest file: <?xml version="1.0" encoding="utf-8"?> <manifest xmlns:android="http://schemas.android.com/apk/res/android" package="zabolotnii.pavel.timer" android:versionCode="1" android:versionName="1.0" > <uses-sdk android:minSdkVersion="8" android:targetSdkVersion="18 " /> <application android:allowBackup="true" android:icon="@drawable/ic_launcher" android:label="@string/app_name" android:theme="@style/AppTheme" > <activity android:name="zabolotnii.pavel.timer.TimerActivity" android:label="@string/app_name" > <intent-filter> <action android:name="android.intent.action.MAIN" /> <category android:name="android.intent.category.LAUNCHER" /> </intent-filter> </activity> </application> </manifest> I don't know, if there is any need to attach the new class ,but I didn't any changes to other code that should led to this error: package zabolotnii.pavel.timer; import android.app.AlertDialog; import android.content.Context; import android.content.DialogInterface; import android.graphics.Paint; import android.graphics.Point; import android.graphics.Rect; import android.graphics.drawable.Drawable; import android.os.Environment; import android.util.DisplayMetrics; import android.util.TypedValue; import android.view.*; import android.widget.*; import java.io.File; import java.io.FilenameFilter; import java.util.*; public class OpenFileDialog extends AlertDialog.Builder { private String currentPath = Environment.getExternalStorageDirectory().getPath(); private List<File> files = new ArrayList<File>(); private TextView title; private ListView listView; private FilenameFilter filenameFilter; private int selectedIndex = -1; private OpenDialogListener listener; private Drawable folderIcon; private Drawable fileIcon; private String accessDeniedMessage; public interface OpenDialogListener { public void OnSelectedFile(String fileName); } private class FileAdapter extends ArrayAdapter<File> { public FileAdapter(Context context, List<File> files) { super(context, android.R.layout.simple_list_item_1, files); } @Override public View getView(int position, View convertView, ViewGroup parent) { TextView view = (TextView) super.getView(position, convertView, parent); File file = getItem(position); if (view != null) { view.setText(file.getName()); if (file.isDirectory()) { setDrawable(view, folderIcon); } else { setDrawable(view, fileIcon); if (selectedIndex == position) view.setBackgroundColor(getContext().getResources().getColor(android.R.color.holo_blue_dark)); else view.setBackgroundColor(getContext().getResources().getColor(android.R.color.transparent)); } } return view; } private void setDrawable(TextView view, Drawable drawable) { if (view != null) { if (drawable != null) { drawable.setBounds(0, 0, 60, 60); view.setCompoundDrawables(drawable, null, null, null); } else { view.setCompoundDrawables(null, null, null, null); } } } } public OpenFileDialog(Context context) { super(context); title = createTitle(context); changeTitle(); LinearLayout linearLayout = createMainLayout(context); linearLayout.addView(createBackItem(context)); listView = createListView(context); linearLayout.addView(listView); setCustomTitle(title) .setView(linearLayout) .setPositiveButton(android.R.string.ok, new DialogInterface.OnClickListener() { @Override public void onClick(DialogInterface dialog, int which) { if (selectedIndex > -1 && listener != null) { listener.OnSelectedFile(listView.getItemAtPosition(selectedIndex).toString()); } } }) .setNegativeButton(android.R.string.cancel, null); } @Override public AlertDialog show() { files.addAll(getFiles(currentPath)); listView.setAdapter(new FileAdapter(getContext(), files)); return super.show(); } public OpenFileDialog setFilter(final String filter) { filenameFilter = new FilenameFilter() { @Override public boolean accept(File file, String fileName) { File tempFile = new File(String.format("%s/%s", file.getPath(), fileName)); if (tempFile.isFile()) return tempFile.getName().matches(filter); return true; } }; return this; } public OpenFileDialog setOpenDialogListener(OpenDialogListener listener) { this.listener = listener; return this; } public OpenFileDialog setFolderIcon(Drawable drawable) { this.folderIcon = drawable; return this; } public OpenFileDialog setFileIcon(Drawable drawable) { this.fileIcon = drawable; return this; } public OpenFileDialog setAccessDeniedMessage(String message) { this.accessDeniedMessage = message; return this; } private static Display getDefaultDisplay(Context context) { return ((WindowManager) context.getSystemService(Context.WINDOW_SERVICE)).getDefaultDisplay(); } private static Point getScreenSize(Context context) { Point screeSize = new Point(); getDefaultDisplay(context).getSize(screeSize); return screeSize; } private static int getLinearLayoutMinHeight(Context context) { return getScreenSize(context).y; } private LinearLayout createMainLayout(Context context) { LinearLayout linearLayout = new LinearLayout(context); linearLayout.setOrientation(LinearLayout.VERTICAL); linearLayout.setMinimumHeight(getLinearLayoutMinHeight(context)); return linearLayout; } private int getItemHeight(Context context) { TypedValue value = new TypedValue(); DisplayMetrics metrics = new DisplayMetrics(); context.getTheme().resolveAttribute(android.R.attr.listPreferredItemHeightSmall, value, true); getDefaultDisplay(context).getMetrics(metrics); return (int) TypedValue.complexToDimension(value.data, metrics); } private TextView createTextView(Context context, int style) { TextView textView = new TextView(context); textView.setTextAppearance(context, style); int itemHeight = getItemHeight(context); textView.setLayoutParams(new ViewGroup.LayoutParams(ViewGroup.LayoutParams.MATCH_PARENT, itemHeight)); textView.setMinHeight(itemHeight); textView.setGravity(Gravity.CENTER_VERTICAL); textView.setPadding(15, 0, 0, 0); return textView; } private TextView createTitle(Context context) { TextView textView = createTextView(context, android.R.style.TextAppearance_DeviceDefault_DialogWindowTitle); return textView; } private TextView createBackItem(Context context) { TextView textView = createTextView(context, android.R.style.TextAppearance_DeviceDefault_Small); Drawable drawable = getContext().getResources().getDrawable(android.R.drawable.ic_menu_directions); drawable.setBounds(0, 0, 60, 60); textView.setCompoundDrawables(drawable, null, null, null); textView.setLayoutParams(new ViewGroup.LayoutParams(ViewGroup.LayoutParams.MATCH_PARENT, ViewGroup.LayoutParams.WRAP_CONTENT)); textView.setOnClickListener(new View.OnClickListener() { @Override public void onClick(View view) { File file = new File(currentPath); File parentDirectory = file.getParentFile(); if (parentDirectory != null) { currentPath = parentDirectory.getPath(); RebuildFiles(((FileAdapter) listView.getAdapter())); } } }); return textView; } public int getTextWidth(String text, Paint paint) { Rect bounds = new Rect(); paint.getTextBounds(text, 0, text.length(), bounds); return bounds.left + bounds.width() + 80; } private void changeTitle() { String titleText = currentPath; int screenWidth = getScreenSize(getContext()).x; int maxWidth = (int) (screenWidth * 0.99); if (getTextWidth(titleText, title.getPaint()) > maxWidth) { while (getTextWidth("..." + titleText, title.getPaint()) > maxWidth) { int start = titleText.indexOf("/", 2); if (start > 0) titleText = titleText.substring(start); else titleText = titleText.substring(2); } title.setText("..." + titleText); } else { title.setText(titleText); } } private List<File> getFiles(String directoryPath) { File directory = new File(directoryPath); List<File> fileList = Arrays.asList(directory.listFiles(filenameFilter)); Collections.sort(fileList, new Comparator<File>() { @Override public int compare(File file, File file2) { if (file.isDirectory() && file2.isFile()) return -1; else if (file.isFile() && file2.isDirectory()) return 1; else return file.getPath().compareTo(file2.getPath()); } }); return fileList; } private void RebuildFiles(ArrayAdapter<File> adapter) { try { List<File> fileList = getFiles(currentPath); files.clear(); selectedIndex = -1; files.addAll(fileList); adapter.notifyDataSetChanged(); changeTitle(); } catch (NullPointerException e) { String message = getContext().getResources().getString(android.R.string.unknownName); if (!accessDeniedMessage.equals("")) message = accessDeniedMessage; Toast.makeText(getContext(), message, Toast.LENGTH_SHORT).show(); } } private ListView createListView(Context context) { ListView listView = new ListView(context); listView.setOnItemClickListener(new AdapterView.OnItemClickListener() { @Override public void onItemClick(AdapterView<?> adapterView, View view, int index, long l) { final ArrayAdapter<File> adapter = (FileAdapter) adapterView.getAdapter(); File file = adapter.getItem(index); if (file.isDirectory()) { currentPath = file.getPath(); RebuildFiles(adapter); } else { if (index != selectedIndex) selectedIndex = index; else selectedIndex = -1; adapter.notifyDataSetChanged(); } } }); return listView; } }

Read the article

Received memory warning. Level=2, Program received signal: “0”.

- by sabby

Hi friends I am getting images from webservice and loading these images in table view.But when i continue to scroll the program receives memory warning level1,level2 and then app exits with status 0.That happens only in device not in simulator. Here is my code which i am putting please help me out. - (void)viewDidLoad { [super viewDidLoad]; UIButton *infoButton = [[UIButton alloc] initWithFrame:CGRectMake(0, -4, 62, 30)]; [infoButton setBackgroundImage:[UIImage imageNamed: @"back.png"] forState:UIControlStateNormal]; [infoButton addTarget:self action:@selector(backButtonClicked) forControlEvents:UIControlEventTouchUpInside]; UIBarButtonItem *customBarButtomItem = [[UIBarButtonItem alloc] initWithCustomView:infoButton]; self.navigationItem.leftBarButtonItem = customBarButtomItem; [customBarButtomItem release]; [infoButton release]; UIButton *homeButton = [[UIButton alloc] initWithFrame:CGRectMake(0, 0, 62, 30)]; [homeButton setBackgroundImage:[UIImage imageNamed: @"home.png"] forState:UIControlStateNormal]; [homeButton.titleLabel setFont:[UIFont systemFontOfSize:11]]; //[homeButton setTitle:@"UPLOAD" forState:UIControlStateNormal]; [homeButton addTarget:self action:@selector(homeButtonClicked) forControlEvents:UIControlEventTouchUpInside]; UIBarButtonItem *rightBarButtom = [[UIBarButtonItem alloc] initWithCustomView:homeButton]; self.navigationItem.rightBarButtonItem = rightBarButtom; [rightBarButtom release]; [homeButton release]; sellerTableView=[[UITableView alloc]initWithFrame:CGRectMake(0, 0, 320, 416) style:UITableViewStylePlain]; sellerTableView.delegate=self; sellerTableView.dataSource=self; sellerTableView.backgroundColor=[UIColor clearColor]; sellerTableView.scrollEnabled=YES; //table.separatorColor=[UIColor grayColor]; //table.separatorColor=[UIColor whiteColor]; //[[table layer]setRoundingMode:NSNumberFormatterRoundDown]; [[sellerTableView layer]setBorderColor:[[UIColor darkGrayColor]CGColor]]; [[sellerTableView layer]setBorderWidth:2]; //[[productTable layer]setCornerRadius:10.3F]; [self.view addSubview:sellerTableView]; appDel = (SnapItAppAppDelegate*)[[UIApplication sharedApplication] delegate]; } -(void)viewWillAppear:(BOOL)animated { spinner = [[UIActivityIndicatorView alloc] initWithActivityIndicatorStyle:UIActivityIndicatorViewStyleGray]; spinner.center = self.view.center; [self.view addSubview:spinner]; [spinner startAnimating]; [[SnapItParsing sharedInstance]assignSender:self]; [[SnapItParsing sharedInstance]startParsingForShowProducts:appDel.userIdString]; [sellerTableView reloadData]; } -(void)showProducts:(NSMutableArray*)proArray { if (spinner) { [spinner stopAnimating]; [spinner removeFromSuperview]; [spinner release]; spinner = nil; } if ([[[proArray objectAtIndex:1]objectForKey:@"Success"]isEqualToString:@"True"]) { //[self.navigationController popViewControllerAnimated:YES]; //self.view.alpha=.12; if (productInfoArray) { [productInfoArray release]; } productInfoArray=[[NSMutableArray alloc]init]; for (int i=2; i<[proArray count]; i++) { NSAutoreleasePool *pool = [[NSAutoreleasePool alloc] init]; [productInfoArray addObject:[proArray objectAtIndex:i]]; NSLog(@"data fetch array is====> /n%@",productInfoArray); [pool release]; } } } #pragma mark (tableview methods) - (CGFloat)tableView:(UITableView *)tableView heightForRowAtIndexPath:(NSIndexPath *)indexPath{ return 100; } - (NSInteger)tableView:(UITableView *)tableView numberOfRowsInSection:(NSInteger)section { //return [resultarray count]; return [productInfoArray count]; } -(void)loadImagesInBackground:(NSNumber *)index{ NSAutoreleasePool *pool = [[NSAutoreleasePool alloc] init]; NSMutableDictionary *frame = [[productInfoArray objectAtIndex:[index intValue]] retain]; //NSLog(@"frame value ==>%@",[[frame objectForKey:@"Image"]length]); NSString *frameImagePath = [NSString stringWithFormat:@"http://apple.com/snapit/products/%@",[frame objectForKey:@"Image"]]; NSData *imageData = [NSData dataWithContentsOfURL:[NSURL URLWithString:frameImagePath]]; NSLog(@"FRAME IMAGE%d",[[frame valueForKey:@"Image" ]length]); if([[frame valueForKey:@"Image"] length] == 0){ NSString *imagePath = [[NSString alloc] initWithFormat:@"%@/%@",[[NSBundle mainBundle] resourcePath],@"no_image.png"]; UIImage *image = [UIImage imageWithContentsOfFile:imagePath]; [frame setObject:image forKey:@"friendImage"]; [imagePath release]; //[image release]; } else { //NSData *imageData = [NSData dataWithContentsOfURL:[NSURL URLWithString:frameImagePath]]; NSLog(@"image data length ==>%d",[imageData length]); if([imageData length] == 0){ NSString *imagePath = [[NSString alloc] initWithFormat:@"%@/%@",[[NSBundle mainBundle] resourcePath],@"no_image.png"]; UIImage *image = [UIImage imageWithContentsOfFile:imagePath]; [frame setObject:image forKey:@"friendImage"]; [imagePath release]; //[image release]; } else { //UIImage *image = [[UIImage alloc] initWithData:imageData]; UIImage *image = [UIImage imageWithData:imageData]; [frame setObject:image forKey:@"friendImage"]; //[image release]; } } [frame release]; frame = nil; [self performSelectorOnMainThread:@selector(reloadTable:) withObject:[NSArray arrayWithObject:[NSIndexPath indexPathForRow:[index intValue] inSection:0]] waitUntilDone:NO]; [pool release]; } -(void)reloadTable:(NSArray *)array{ NSLog(@"array ==>%@",array); [sellerTableView reloadRowsAtIndexPaths:array withRowAnimation:UITableViewRowAnimationNone]; } - (UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath { static NSString *celltype=@"cell"; UITableViewCell *cell = [tableView dequeueReusableCellWithIdentifier:celltype]; for (UIView *view in cell.contentView.subviews) { [view removeFromSuperview]; } if (cell == nil) { cell = [[[UITableViewCell alloc] initWithStyle:UITableViewCellStyleDefault reuseIdentifier:@"cell"] autorelease]; cell.accessoryType = UITableViewCellAccessoryDisclosureIndicator; cell.backgroundColor=[UIColor clearColor]; //cell.textLabel.text=[[resultarray objectAtIndex:indexPath.row] valueForKey:@"Service"]; /*UIImage *indicatorImage = [UIImage imageNamed:@"indicator.png"]; cell.accessoryView = [[[UIImageView alloc] initWithImage:indicatorImage] autorelease];*/ /*NSThread *thread=[[NSThread alloc]initWithTarget:self selector:@selector() object:nil]; [thread setStackSize:44]; [thread start];*/ cell.backgroundView=[[[UIImageView alloc]initWithImage:[UIImage imageNamed:@"cell.png"]]autorelease]; // [[[UIImageView alloc] initWithImage:[UIImage imageNamed:@"back.png"]] autorelease]; cell.selectionStyle=UITableViewCellSelectionStyleNone; } UIImageView *imageView= [[UIImageView alloc] initWithFrame:CGRectMake(19, 15, 75, 68)]; imageView.contentMode = UIViewContentModeScaleToFill; // @synchronized(self) //{ NSMutableDictionary *dict = [productInfoArray objectAtIndex:indexPath.row]; if([dict objectForKey:@"friendImage"] == nil){ imageView.backgroundColor = [UIColor clearColor]; if ([dict objectForKey:@"isThreadLaunched"] == nil) { [NSThread detachNewThreadSelector:@selector(loadImagesInBackground:) toTarget:self withObject:[NSNumber numberWithInt:indexPath.row]]; [dict setObject:@"Yes" forKey:@"isThreadLaunched"]; } }else { imageView.image =[dict objectForKey:@"friendImage"]; } //NSString *imagePath = [[NSString alloc] initWithFormat:@"%@/%@",[[NSBundle mainBundle] resourcePath],@"no_image.png"]; //imageView.layer.cornerRadius = 20.0;//vk //imageView.image=[UIImage imageWithContentsOfFile:imagePath]; //imageView.layer.masksToBounds = YES; //imageView.layer.borderColor = [UIColor darkGrayColor].CGColor; //imageView.layer.borderWidth = 1.0;//vk //imageView.layer.cornerRadius=7.2f; [cell.contentView addSubview:imageView]; //[imagePath release]; [imageView release]; imageView = nil; //} UILabel *productCodeLabel = [[UILabel alloc] initWithFrame:CGRectMake(105, 7, 60,20 )]; productCodeLabel.textColor = [UIColor whiteColor]; productCodeLabel.backgroundColor=[UIColor clearColor]; productCodeLabel.text=[NSString stringWithFormat:@"%@",@"Code"]; [cell.contentView addSubview:productCodeLabel]; [productCodeLabel release]; UILabel *CodeValueLabel = [[UILabel alloc] initWithFrame:CGRectMake(170, 7, 140,20 )]; CodeValueLabel.textColor = [UIColor whiteColor]; CodeValueLabel.backgroundColor=[UIColor clearColor]; CodeValueLabel.text=[NSString stringWithFormat:@"%@",[[productInfoArray objectAtIndex:indexPath.row]valueForKey:@"ID"]]; [cell.contentView addSubview:CodeValueLabel]; [CodeValueLabel release]; UILabel *productNameLabel = [[UILabel alloc] initWithFrame:CGRectMake(105, 35, 60,20 )]; productNameLabel.textColor = [UIColor whiteColor]; productNameLabel.backgroundColor=[UIColor clearColor]; productNameLabel.text=[NSString stringWithFormat:@"%@",@"Name"]; [cell.contentView addSubview:productNameLabel]; [productNameLabel release]; UILabel *NameValueLabel = [[UILabel alloc] initWithFrame:CGRectMake(170, 35, 140,20 )]; NameValueLabel.textColor = [UIColor whiteColor]; NameValueLabel.backgroundColor=[UIColor clearColor]; NameValueLabel.text=[NSString stringWithFormat:@"%@",[[productInfoArray objectAtIndex:indexPath.row]valueForKey:@"Title"]]; [cell.contentView addSubview:NameValueLabel]; [NameValueLabel release]; UILabel *dateLabel = [[UILabel alloc] initWithFrame:CGRectMake(105, 68, 60,20 )]; dateLabel.textColor = [UIColor whiteColor]; dateLabel.backgroundColor=[UIColor clearColor]; dateLabel.text=[NSString stringWithFormat:@"%@",@"Date"]; [cell.contentView addSubview:dateLabel]; [dateLabel release]; UILabel *dateValueLabel = [[UILabel alloc] initWithFrame:CGRectMake(170, 68, 140,20 )]; dateValueLabel.textColor = [UIColor whiteColor]; dateValueLabel.backgroundColor=[UIColor clearColor]; dateValueLabel.text=[NSString stringWithFormat:@"%@",[[productInfoArray objectAtIndex:indexPath.row]valueForKey:@"PostedDate"]]; dateValueLabel.font=[UIFont systemFontOfSize:14]; dateValueLabel.numberOfLines=3; dateValueLabel.adjustsFontSizeToFitWidth=YES; [dateValueLabel setLineBreakMode:UILineBreakModeCharacterWrap]; [cell.contentView addSubview:dateValueLabel]; [dateValueLabel release]; } Please-2 help me out ,where i am doing mistake.....

Read the article

Website displays in chrome perfectly, but not in mozilla or IE

- by Atharul Khan

here are the code snippets for the html and css. It works finds in Google chrome, but when I try to display it in mozilla or IE, it shows something completely different. I cannot attach images as I do not have the required reputation. I really appreciate the help. Thank you! HTML <!DOCTYPE html> <html> <head> <meta charset="utf-8" /> <meta http-equiv="Content-type" content="text/html; charset=utf-8" /> <meta name="viewport" content="width=device-width, initial-scale=1" /> <link rel="stylesheet" type="text/css" href="style.css"> <link rel="shortcut icon" href="ak.png"> <title>Home</title> </head> <body> <div class="Nav"> <nav> <ul class="navigation fade-in2"> <li><a href="#home">Home</a></li> <li><a href="#about">About</a></li> <li><a href="#portfolio">Portfolio</a></li> <li><a href="#shop">Shop</a></li> <li><a href="#blog">Blog</a></li> <li><a href="#contact">Contact</a></li> </ul> </nav> </div> <div class="logo"><a href="#home"><img class="ak fade-in2" src="ak.png"></a></div> <div class="background"><img class="beauty" src="beauty.jpg"></div> <div class="header"> <h1 class="headerName fade-in">DESIGN | DEVELOP | BRAND</h1> <h4 class="service fade-in3"><a href="#portfolio">VIEW PORTFOLIO</a></h4> <h4 class="service fade-in3"><a href="#services">VIEW SERVICES</a></h4> </div>  </body> </html> CSS @-webkit-keyframes fadeIn { from { opacity:0; } to { opacity:1; } } @-moz-keyframes fadeIn { from { opacity:0; } to { opacity:1; } } @keyframes fadeIn { from { opacity:0; } to { opacity:1; } } * { padding: 0; margin: 0; } li { display: inline; font-size: 15px; font-family: verdana; } nav { width: 100%; text-align: right; background-color: #222222; padding: 0; margin: 0px; line-height: 47px; position: fixed; z-index: 100; } .ak{ width: 90px; height: 55px; z-index: 101; position: fixed; background: transparent; color: transparent; background-color: transparent; } .Nav a{ text-decoration: none; padding: 15px; } .Nav a:link{ color: #A7A7A7; } .Nav a:visited{ color: #A7A7A7; } .Nav a:hover{ color: #DBDBDB; transition: all 0.3s ease-out 0s; transition-property: all; transition-duration: 0.3s; transition-timing-function: ease-out; transition-delay: 0s; } .header { background-color: rgba(0,0,0, 0.25); width: 100%; height: 626px; text-align: center; position: fixed; z-index: 10; } .background { position: fixed; z-index: 8; } .beauty { width: 100%; height: 626px; } .headerName { font-size: 2.5em; text-align: center; color: #D3D3D3; padding: 180px; padding-bottom: 50px; margin: 0px; letter-spacing: 4px; font-weight: 100; font-family: 'Lato', sans-serif; } .fade-in { opacity:0; /* make things invisible upon start */ -webkit-animation:fadeIn ease-in 1; /* call our keyframe named fadeIn, use animation ease-in and repeat it only 1 time */ -moz-animation:fadeIn ease-in 1; animation:fadeIn ease-in 1; -webkit-animation-fill-mode:forwards; /* this makes sure that after animation is done we remain at the last keyframe value (opacity: 1)*/ -moz-animation-fill-mode:forwards; animation-fill-mode:forwards; -webkit-animation-duration:1s; -moz-animation-duration:1s; animation-duration:1s; -webkit-animation-delay: 0.3s; -moz-animation-delay:0.3s; animation-delay: 0.3s; } .fade-in2 { opacity:0; /* make things invisible upon start */ -webkit-animation:fadeIn ease-in 1; /* call our keyframe named fadeIn, use animation ease-in and repeat it only 1 time */ -moz-animation:fadeIn ease-in 1; animation:fadeIn ease-in 1; -webkit-animation-fill-mode:forwards; /* this makes sure that after animation is done we remain at the last keyframe value (opacity: 1)*/ -moz-animation-fill-mode:forwards; animation-fill-mode:forwards; -webkit-animation-duration:1s; -moz-animation-duration:1s; animation-duration:1s; -webkit-animation-delay: 0.6s; -moz-animation-delay:0.6s; animation-delay: 0.6s; } .fade-in3 { opacity:0; /* make things invisible upon start */ -webkit-animation:fadeIn ease-in 1; /* call our keyframe named fadeIn, use animation ease-in and repeat it only 1 time */ -moz-animation:fadeIn ease-in 1; animation:fadeIn ease-in 1; -webkit-animation-fill-mode:forwards; /* this makes sure that after animation is done we remain at the last keyframe value (opacity: 1)*/ -moz-animation-fill-mode:forwards; animation-fill-mode:forwards; -webkit-animation-duration:1s; -moz-animation-duration:1s; animation-duration:1s; -webkit-animation-delay: 0.9s; -moz-animation-delay:0.9s; animation-delay: 0.9s; } .service{ font-size: 14px; width: 190px; text-align: center; font-family: 'Lato', sans-serif; color: #D3D3D3; border: 2px #A7A7A7 solid; border-color: rgba(255, 255, 255, 0.5); display: inline-block; border-radius: 5px; background-color: transparent; letter-spacing: 2px; } .service a{ text-decoration: none; display: block; padding: 15px 20px; } .service a:link{ color: #D3D3D3; } .service a:visited{ color: #D3D3D3; } .service a:hover{ background-color: rgba(255, 255, 255, 0.15); transition: background-color .15s ease-in; -webkit-transition: background-color .15s ease-in; -moz-transition: background-color .15s ease-in; -o-transition: background-color .15s ease-in; } UPDATE 1: I updated both browsers and it seems the css3 animations work perfectly fine on both browsers. What seems to be the problem is the positioning of the pages UPDATE 2: Here are the links to the different browser screen shots Chrome: https://www.dropbox.com/s/jlpa4vu51kdnews/Chrome.JPG InternetExplorer: https://www.dropbox.com/s/zbchs3su9ahxr0n/IE.JPG Mozilla Firefox: dropbox(.)com/s/fyalnhsha9ktadz/Mozilla.JPG (I can't post the third link because I don't have enough reputation)

Read the article

SOA PARTNER COMMUNITY NEWSLETTER JULY 2012

- by mseika

SOA PARTNER COMMUNITY NEWSLETTER JULY 2012 Dear SOA partner community member To provide our community members the best of our knowledge, we want your feedback on our SOA Partner community. Thus we are organizing SOA Partner Community Survey 2012. We request you to participate in the survey and give your valuable feedback on various areas of marketing, sales and education. To continue our successful BPM Suite, Oracle is launching together with you Process Accelerators initiative. It’s your opportunity to co-develop and market predefined processes. Oracle Fusion Applications Design Patterns are a great tool to develop your SOA or BPM solution or process accelerators. To promote your SOA & BPM Specialization we continue to offer several benefits. This month we would like to highlight our Specialization Plaques - make sure you request one for your office! Our Fusion Middleware Summer Camps are booked out, if could not get a seat you can attend the SOA & BPM track @ Virtual Developer Day: Oracle Fusion Development Oracle demo systems offer´s two new demos: Business Driven Development based on BPM Suite & SOA Lifecycle Management. Jürgen KressOracle SOA & BPM Partner Adoption EMEA NEW CONTENT Community SurveyProcess Accelerators KitPlaques SOA & BPM SpecializedSOA & BPM at Virtual Developer Day News from our Partners & CommunityOverview of SOA Diagnostics in 11.1.1.6 Business driven development(BDD) demo now available! SOA Lifecycle Management Oracle Fusion applications design patterns Updated material by Oracle Connect and Network SOA Blogs SOA on Facebook SOA on LinkedIn SOA on Twitter Mix SOA Forum COMMUNITY SURVEY Like every year we would like to get your feedback in our SOA Partner Community Survey 2012. Make sure that You attend to further develop our community and support our planning! It is key for us to get your feedback to prepare for the next fiscal year. Back to top PROCESS ACCELERATORS KIT Oracle is very interested to co-develop and market with you, our partners, pre-defined processes for BPM Suite.I am very happy to announce a new program called “Oracle BPM Partner Solution Catalog”. This program will provide a one-stop shop for our customers looking for Oracle BPM partner solutions available in the market today.The Oracle BPM Solution Catalog will be hosted on our very popular Oracle Technology Network (OTN). To give you an idea of the scale of customer visibility, OTN today receives over 1Million hits per day from our business and developer community. We would like to invite you to list your Oracle BPM 11g solutions available today.In order to participate in this program, you need to do the following: Fill in the attached slide templates - #3 and #4 for each Oracle BPM 11g solution you would like to list on OTN.Please add links to whitepapers , videos, references to the specific solution in the template slide. We recommend that you create a landing page on your website for these linked artifacts and just point to the same from within the PowerPoint template. This will give you the flexibility to update the information as frequently as needed. If you have the particular solution in production or a reference available, please list them as well. Send the PowerPoint template slides (1 set of slides for each Oracle BPM solution) to [email protected]. In addition to having the opportunity to list your solutions on OTN for Oracle customers, you will have the chance to advertise your new wins/implementations/solutions in an Oracle Sponsored PM Webinar held every quarter. This program is targeted to go live by the end of summer 2012. At this point, we are targeting a soft launch in July end 2012 so send on your BPM solutions information as soon as possible. We would love to have your solution(s) listed in the “Oracle BPM Partner Solution Catalog” at the time of the launch. This will be a live repository so you can keep adding more solutions as they become available. If you have any questions, please feel free to contact us [email protected], Product Strategy Director, Oracle BPM , Phone +1 650.506.5486.Thank you and look forward to hearing from you. Oracle BPM team Process Accelerators Overview.pdf ProcessAcceleratorsDataSheet.pdf Demos draUPK.zip & trmUPK.zip BPM Solution repository slides.ppt Additional BPM material BPM Process Development Lifecycle Document that describes recommended approach to collaborative process modeling across business and IT tools ADF 11g PS5 Application with Customized BPM Worklist Task Flow (MDS Seeded Customization) by Andrejus Baranovskis BPMN process editor problems in 11.1.1.6 by Mark Nelson BPM – Disable DBMS job to refresh B2B Materialized View by Mark Nelson For the complete kit please visit the BPM folder at our SOA Community Workspace (SOA Community membership required). For the complete presentation please visit our SOA Community Workspace (SOA Community membership required). Information is Oracle and Partner confidential! Back to top PLAQUES SOA & BPM SPECIALIZED We continue to offer you a nice SOA & BPM Specialization plaque with your logo to proof your success. If you are a SOA or BPM Specialized partner and would like to request the plaque please send Brigitte an e-mail with the following information: Partner Name Partner logo (preferred eps file) Partner Status gold or platinum Your shipping address Your Specialization: SOA or BPM We recommend to mount the plaque at your office reception in addition you can use the SOA Specialization logos at your website download Logo: Gold & Platinum or the BPM logos Gold & Platinum Back to top SOA & BPM AT VIRTUAL DEVELOPER DAY Register now for this FREE hands-on online workshop Get up to date and learn everything you wanted to know about Oracle ADF & Fusion Development plus live Q&A chats with Oracle technical staffOracle Application Development Framework (ADF) is the standards based, strategic framework for Oracle Fusion Applications and Oracle Fusion Middleware. Oracle ADF’s integration with the Oracle SOA Suite, Oracle WebCenter and Oracle BI creates a complete productive development platform for your custom applications.Join us at this FREE virtual event and learn the latest in Fusion Development including: Is Oracle ADF development faster and simpler than Forms, Apex or .Net? Mobile Application Development with ADF Mobile Oracle ADF development with Eclipse Oracle WebCenter Portal and ADF Development Application Lifecycle Management with ADF Building Process Centric Applications with ADF and BPM Oracle Business Intelligence and ADF Integration Live Q&A chats with Oracle technical staff Developer lead, manager or architect - this event has something for everyone. Don’t miss this opportunity.Tuesday, July 10, 2012. 9:00 a.m. PT -1:00 p.m. PT 11:00 a.m. CT - 3:00 p.m. CT 12:00 p.m. ET - 4:00 p.m. ET 1:00 p.m. BRT - 5:00 p.m. BRT Register online now! for this FREE event. Agenda: 09:00 am Opening 09:30 am Keynote: Oracle Fusion Development Track1Introduction to Fusion Development Track2What's New in Fusion Development Track3Fusion Development in the Enterprise 10:00 am Is Oracle ADF Development Faster and Simpler than Oracle Forms, APEX or .Net? Mobile Application Development with ADF Mobile Oracle WebCenter Portal and ADF Development 11:00 am Rich Web UI made simple - an ADF Faces Overview Oracle Enterprise Pack for Eclipse - ADF Development Building Process Centric Applications with ADF and BPM 12:00 noon Next Generation Controller for JSF Application Lifecycle Management for ADF Oracle Business Intelligence and ADF Integration *Hands On Lab – WebCenter and ADF Lab w/ JDeveloper - Lab materials will be provided ahead of the event to give you ample time to work through the lab and increase the productivity of the live chat sessions the day of the event. Sessions abstractsRegister online now! for this FREE event Read more on Community Events and post your comment here. Back to top NEWS FROM OUR PARTNERS AND COMMUNITY Send your tweets @soacommunity #soacommunity and follow us at http://twitter.com/soacommunity JDeveloper & ADF?Troubleshooting BPMN process editor problems in 11.1.1.6http://dlvr.it/1p0FfS SOA Community?SOA & BPM @ Virtual Developer Day: Oracle Fusion Development - July 10th 2012https://soacommunity.wordpress.com/2012/07/02/soa-bpm-virtual-developer-day- oracle-fusion-developmentjuly-10th-2012/#soacommunity #soa #bom #education orclateamsoa ?A-Team Blog #ateam: BAM design pointers - In working recently with a large Oracle customer on SOA and BAM, I discove.http://ow.ly/1kYqES SOA CommunitySOA Community Newsletter June 2012http://wp.me/p10C8u-qw SOA CommunityBPMN process editor problems in 11.1.1.6 by Mark Nelsonhttp://redstack.wordpress.com/2012/06/27/ bpmn-process-editor-problems-in-11-1-1-6 #soacommunity #bpm OTNArchBeat ?SOA Learning Library: free short, topic-focused training on Oracle SOA & BPM products | @SOACommunity http://pub.vitrue.com/NE1G Andrejus Baranovskis ?ADF 11g PS5 Application with Customized BPM Worklist Task Flow (MDS Seeded Customization)http://fb.me/1coX4r1X1 SOA CommunitySOA Learning Library provides a comprehensive curriculum for the SOA and BPM product suites https://soacommunity.wordpress.com/2012/06/27/soa-learning-library #soacommunity #soa #bpm OTNArchBeat ?A Universal JMX Client for Weblogic - Part 1: Monitoring BPEL Thread Pools in SOA 11g | Stefan Koserhttp://pub.vitrue.com/mQVZ OTNArchBeat ?BPM - Disable DBMS job to refresh B2B Materialized View | Mark Nelson http://pub.vitrue.com/3PR0Oracle SOA ?Learn how Choice Hotels Implements Innovative Google Maps Solution with #OracleSOA http://bit.ly/MTwIJ3 SOA Communitytop Tweets SOA Partner Community - June 2012 Send your tweets @soacommunity #soacommunity https://soacommunity.wordpress.com/2012/06/25/top-tweets-soa-partner-community-june-2012 Torsten Winterberg#OPITZ is pushing Oracle commitment to the next level: New Specializations done: ADF, BPM, WLS, Exadatahttp://bit.ly/KX1WVS ServiceTechSymposium ?Only 8 more days left until Super Early Bird Registration Discount expires! http://www.servicetechsymposium.com OracleBlogsSOA Management in 3 minutes - Video explainerhttp://ow.ly/1kN5pn SOA Community ?SOA, Cloud & Service Technology Symposium 2012 London - Enter Promo Code: Djmxz370https://soacommunity.wordpress.com/2012/06/22/soa-cloud-service-technology-symposium-2012-london #soasymposium #soacommunity #soa Heidi BuelowGreat course! w David Read RT @soacommunity: product management ADF for BPM training 5 seats left https://soacommunity.wordpress.com/2012/06/12/fusion-middleware-summer-campsadvanced-partner-trainings/ #bpm #soacommunity SOA Community ?product management ADF for BPM training 5 seats lefthttps://soacommunity.wordpress.com/2012/06/12/fusion-middleware-summer-campsadvanced-partner-trainings/ #bpm #soacommunity OTNArchBeat ?Oacle Fusion Applications Design Patterns Now Available For Developers | Ultan O'Broinhttp://pub.vitrue.com/UEiF OTNArchBeat ?SOA, Cloud & Service Technology Symposium 2012London - Special Oracle Discounthttp://pub.vitrue.com/8E0J SOA CommunityBecome a facebook fan of soacommunity http://www.facebook.com/soacommunity #soacommunity SOA Community ?SOA Suite HealthCare Integration Architecture https://blogs.oracle.com/SOAForHealthcare/entry/soa_suite_healthcare_integration_architecture #soacommunity #soa Andrejus Baranovskis ?Running Pre-built Virtual Machine for SOA Suite and BPM Suite 11g PS5 on Mac OS X Snow Leopard (10.6http://fb.me/vB8nO0Vg OracleBlogsPrinciples of Service-Oriented Architecture by Douwe P. van den Bos http://ow.ly/1kIcOP OTNArchBeatOracle Public Cloud Architecture | @TylerJewell http://ow.ly/bHAcL The SOA Network ?Business Process Management, Service-Oriented Architecture, and Web 2.0: Business Transformation or.http://bit.ly/LBgREL #ITNews #SOA OracleBlogs ?Oracle SOA Foundation Practitioner Certificationhttp://ow.ly/1kGYYg Frank Nimphius ?Learn Advanced ADF. ORACLE Fusion Middleware Summer Camps in Lisbon - July 9th - 13thhttp://bit.ly/KGCl3i SOA CommunityTransform Your Application Integration with Best Practices from Oracle Customershttps://blogs.oracle.com/SOA/entry/transform_your_application_integration_with #soacommunity #soa #bpm Simone GeibWhat you always wanted to know about #oraclesoa diagnostics: Shawn Bailey, Overview of SOA Diagnostics in 11.1.1.6,http://ow.ly/bxK0M Oracle SOA ?Save the date: Jun 21 10AM, SOA & BPM Customer Insight Series. Hear how Choice Hotels went from legacy to #oraclesoa http://bit.ly/LsNDGl OTNArchBeat ?New VirtualBox images for Oracle SOA Suite & Oracle BPM Suite 11.1.1.6.0http://ow.ly/bwDAl OracleBlogs ?Process development lifecycle in Oracle BPM 11g http://ow.ly/1ktesY Daniel AmadeiNew post: Oracle BPEL 11g Message Delivery & Recovery.http://amadei.com.br/blog/index.php /oracle-bpel-11g-message-delivery SOA Community ?Sending out the June edition of the #soacommunity newsletter - read it or become a member http://www.oracle.com/goto/emea/soa!#soa #bpm Arun Pareek ?For the past six months Ahmed Aboulnaga and me have been working on Oracle SOA Suite 11g Administrator's Handbook.http://lnkd.in/CAvpUQ SOA CommunitySun shine all day no clouds - solar eclipse is over... #sunshine #cloud http://www.infoq.com/presentations/Swarm-Computing Michel SchildmeijerWatch my blog Oracle Service Bus 11g: listing projects and services with WLST - part 1 http://lnkd.in/B7f3GQ @TITAN_GS @wlscommunity OTNArchBeatBook Review: Oracle Application Integration Architecture (AIA) Foundation Pack 11gR1: Essentials | Rajesh Rahejahttp://ow.ly/bn2cc OTNArchBeat ?Driving from Business Architecture to Business Process Services | @vghariharan http://ow.ly/bn5UB OTNArchBeat ?SOA Analysis within the Department of Defense Architecture Framework (DoDAF) 2.0 - Part II | Dawit Lessanu http://ow.ly/bn6sX Simone Geib ?Contact me directly for ideas how to improvehttp://bit.ly/advancedsoasuite and additional posts, presentations, white papers, ... #soasuite Simone Geib ?#soasuite advanced OTN page has become too cluttered. Broke it into separate pages to start with. http://bit.ly/advancedsoasuite OracleBlogs ?June Webcast: SOA Gateway Implementation and Troubleshooting (2 sessions) http://ow.ly/1kbRFA ServiceTechSymposium ?New session just posted to calendar: "NoSQL for Data Services, Data Virtualization & Big Data" by Guido Schmutz, Trivadis AG ://ow.ly/bjjOeDebra Lilley ?looks good - real proof people are using the apps ! RT @fteter: Very cool Fusion Applications Help site: http://bit.ly/L3nvOR #FusionApps demed ?rapid proliferation of cloud computing will drive convergence of SOA and cloud paradigms" http://ovum.com/2012/05/18/soa-paves-the-way-for-cloud/ SOA CommunityMiddleware Oracle Excellence Awards 2012-HAPPY NEW YEAR! https://soacommunity.wordpress.com/2012/05/31/middleware-oracle-excellence-awards-2012happy-new-year/ #soacommunity #opn #opnaward #specialization #oracle SOA CommunityHappy New Year #soacommunity thanks for the business! Time for a drink http://pic.twitter.com/zkK08KWB OTNArchBeat ?Who should ‘own’ the Enterprise Architecture? | Michael Glas http://bit.ly/K0ge0Q SOA Communitytop Tweets SOA Partner Community – May 2012 http://wp.me/p10C8u-pP ServiceTechSymposiumNew session just posted to Symposium calendar: "Elastic SOA in the Cloud" by Steve Millidge, C2B2 Consulting http://www.servicetechsymposium.com/agenda2012.php #elastic_soa_in_the_cloud orclateamsoa ?A-Team Blog #ateam: How to Set JVM Parameters in Oracle SOA 11Ghttp://ow.ly/1k2cnl ServiceTechSymposium ?New session just posted to Symposium calendar: "SOA Governance at EDP: A Global Energy Company" by Manuel Rosa, Linkhttp://www.servicetechsymposium.com/agenda2012.php#soa_governance_at_edp SOA Community ?VirtualBox image SOA Suite & BPM Suite 11.1.1.6.0–Your feedback?http://wp.me/p10C8u-qh Oracle MiddlewareSave the date: Jun 21 10AM, SOA & BPM Customer Insight Series. Hear how Choice Hotels went from legacy to#oraclesoa http://bit.ly/LU1y5N OTNArchBeat ?Goodbye, Silos. Hello SOA. | @stephanieoverbyhttp://pub.vitrue.com/NJJO SOA CommunityBPM Standard Edition - to start your BPM project http://wp.me/p10C8u-qj Please feel free to send us your news! And add your blog to our SOA blog wiki. Back to top OVERVIEW OF SOA DIAGNOSTICS IN 11.1.1.6 What tools are available for diagnosing SOA Suite issues? There are a variety of tools available to help you and Support diagnose SOA Suite issues in 11g but it can be confusing as to which tool is appropriate for a particular situation and what their relationships are. This blog post will introduce the various tools and attempt to clarify what each is for and how they are related. Let's first list the tools we'll be addressing: RDA: Remote Diagnostic Agent DFW: Diagnostic Framework Selective Tracing DMS: Dynamic Monitoring Service ODL: Oracle Diagnostic Logging ADR: Automatic Diagnostics Repository ADRCI: Automatic Diagnostics Repository Command Interpreter WLDF: WebLogic Diagnostic Framework This overview is not mean to be a comprehensive guide on using all of these tools, however, extensive reference materials are included that will provide many more details on their execution. Another point to note is that all of these tools are applicable for Fusion Middleware as a whole but specific products may or may not have implemented features to leverage them. A couple of the tools have a WebLogic Scripting Tool or 'WLST' interface. WLST is a command interface for executing pre-built functions and custom scripts against a domain. A detailed WLST tutorial is beyond the scope of this post but you can find general information here. There are more specific resources in the below sections.In this post when we refer to 'Enterprise Manager' or 'EM' we are referring to Enterprise Manager Fusion Middleware Control. read the full blog post here. Read more on Oracle and post your comment here. Back to top BUSINESS DRIVEN DEVELOPMENT (BDD) DEMO NOW AVAILABLE! For access to the Oracle demo systems please visit OPN and talk to your Partner Expert DSS is pleased to announce the availability of the demo “Business Driven Development“. This innovative demonstration uses a case-study approach to show business users how they can easily streamline their Business Processes - delivering greater efficiency, agility, visibility and collaboration with Oracle BPM and WebCenter. The BDD demonstration uses a case study-based approach to highlight a business problem at a fictional company, Avitek Corporation, and uses Oracle BPM and Oracle WebCenter to solve the business problem. This holistic approach has specifically been used to appeal to a non-technical business analyst user. This demo is NOT focused on product features, but aims to guide users through a complete BPM lifecycle. The scenario is based on improving a simple order process (scenario details are in the demo script). Avitek Corporation is sufferinng from a manual email-driven ordering process. Sales reps don’t know where the customer orders are stuck (no visibility) and finance users are unable to manually approve every order (no automation). There are several areas where this process can be improved with Business Process Management technology. This demo shows how improving following areas will ignificantly help resolve the business problems Avitek Corporation is facing. Areas for improvement include: Utilizing BPM for process management, rather than an unregulated, email-based process. Utilizing automated services, rather than requiring a human to key into a system. For example, Finance checking the customer’s credit rating is something that could be automated. Centralizing business rules that can be integrated into a business process, rather than requiring a human to process them. For example, Finance must determine when orders can be automatically approved. Provide insight and visibility into the process. For example, Sales Rep needs to know the status of their customer’s orders. The BDD Demo uses the following products. Oracle BPM Suite 11g PS4FP Oracle WebCenter 11g PS4FP (for Process Spaces) Oracle Business Activity Monitoring 11g Oracle Database 11g Back to top SOA LIFECYCLE MANAGEMENT For access to the Oracle demo systems please visit OPN and talk to your Partner Expert We are pleased to announce the availability of the SOA Management demo that showcases some of the key provisioning and lifecycle management capabilities of SOA Management Pack Enterprise Edition (EE). This demo specifically focuses on some of the lifecycle management solutions for Oracle SOA Suite and Oracle Service Bus (OSB). Demo Highlights The demo showcases the following capabilities. Provisioning of SOA Composites Provisioning of OSB Projects Provision SOA and OSB artifacts in a future maintenance window Back to top ORACLE FUSION APPLICATIONS DESIGN PATTERNS The Oracle Fusion Applications user experience design patterns are published! These new, reusable usability solutions and best-practices, which will join the Oracle dashboard patterns and guidelines that are already available online, are used by Oracle to artfully bring to life a new standard in the user experience, or UX, of enterprise applications. Now, the Oracle applications development community can benefit from the science behind the Oracle Fusion Applications user experience, too. These Oracle Fusion Applications UX Design Patterns, or blueprints, enable Oracle applications developers and system implementers everywhere to leverage professional usability insight when: tailoring an Oracle Fusion application, creating coexistence solutions that existing users will be delighted with, thus enabling graceful user transitions to Oracle Fusion Applications down the road, or designing exciting, new, highly usable applications in the cloud or on-premise. Based on the Oracle Application Development Framework (ADF) components, the Oracle Fusion Applications patterns and guidelines are proven with real users and in the Applications UX usability labs, so you can get right to work coding productivity-enhancing designs that provide an advantage for your entire business. What’s the best way to get started? We’ve made that easy, too. The Design Filter Tool (DeFT) selects the best pattern for your user type and task. Simply adapt your selection for your own task flow and content, and you’re on your way to a really great applications user experience. More Oracle applications design patterns and training are coming your way in the future. To provide feedback on the sets that are currently available, let me know in the comments! Read more on Fusionapps and post your comment here. Back to top UPDATED ORACLE MATERIAL Integrated SOA Gateway Documentation - Implementation Guide | Developer’s Guide Webcast Series: Oracle’s SOA and Oracle Business Process Management Solutions (Choice Hotels, Eaton, Farmers Insurance) BAM design pointers By Kavitha Srinivasan Seeking Oracle Fusion Middleware Go Live StoriesOracle Fusion Middleware product management is looking for recent go live stories to share with the Oracle sales team, sales consulting, product management and other internal groups. Customer contact details may remain anonymous. Your successful implementation will be featured in a quarterly report. The chance to present on an internal webcast is also available. Contact Maria Forney ([email protected]) if you have a noteworthy implementation success story. This is a good opportunity for partners interested in showcasing Oracle Fusion Middleware implementations, and gaining more exposure within Oracle. Performance tuning resources. All in one: docs, blogs, WPs, ppts: http://bit.ly/soa_resources Back to top HAVE YOU MISSED OUR LAST SOA PARTNER COMMUNITY WEBCASTS? UPK Webcast Business Driven Application Management & BPM11g & Application Grid & GoldenGate & Fusion Middleware Pricing & OC4J to WebLogic & Next Generation SOA & Fusion Middleware in Utility & Fusion Middleware in Communications & Fusion Middleware in Public Services & Fusion Middleware in Financial Services Please check your local OPN trainings calendar for additional training dates and locations. Back to top SOA PARTNER COMMUNITY CALENDAR On-Demand Trainings Event Name Language Type SOA Virtual Developers Day English Tech In-Class Trainings Date Event name Location / Country Contact person Type 09-13.07.2012 BPM Suite 11g advanced training by David Read Lisbon, Portugal Jürgen Kress Tech 09-13.07.2012 ADF 11g advanced training by Grant Ronald and Frank Nimphius Lisbon, Portugal Jürgen Kress Tech 09-13.07.2012 WebCenter Portal advanced training by Stefan Krantz and Angelo Santagata Lisbon, Portugal Jürgen Kress Tech 10.07.2012 Fusion Middleware Virtual Developer Day Online OTN Tech 10- 12.07.2012 WebLogic 12c training by Cosmin Tudor Lisbon, Portugal Jürgen Kress Tech 16-18.07.2012 SOA Suite 11g advanced training by Niall Commiskey Munich, Germany Jürgen Kress Tech 16-18.07.2012 ADF for BPM Suite 11g advanced training by David Read Munich, Germany Jürgen Kress Tech 16-18.07.2012 WebCenter Sites 11g advanced training by Product Management Munich, Germany Jürgen Kress Tech 17-20.07.2012 Oracle BPM 11g Implementation Bootcamp Live Virtual Class Oracle University Tech 23-26.07.2012 Oracle BPM 11g Implementation Bootcamp Utrecht, Netherlands Oracle University Tech 29-31.08.2012 Oracle BPM 11g Implementation Bootcamp Live Virtual Class Oracle University Tech 02-05.10.2012 Oracle BPM 11g Implementation Bootcamp Utrecht, Netherlands Oracle University Tech 15-18.10.2012 Oracle BPM 11g Implementation Bootcamp Utrecht, Netherlands Oracle University Tech 28-30.11.2012 Oracle AIA 11g Implementation Bootcamp Live Virtual Class Oracle University Tech 11-14.12.2012 Oracle BPM 11g Implementation Bootcamp Live Virtual Class Oracle University Tech 20-22.2.2013 Oracle AIA 11g Implementation Bootcamp Utrecht, Netherlands Oracle University Tech 14-17.1.2013 Oracle BPM 11g Implementation Bootcamp Utrecht, Netherlands Oracle University Tech 15-18.3.2013 Oracle BPM 11g Implementation Bootcamp Utrecht, Netherlands Oracle University Tech Please check your local OPN Training Calendar for additional training and locations here. Back to top SOASCHOOL.COM - SOA CERTIFIED PROFESSIONAL(SOACP) PROGRAM The SOASchool.com - SOA Certified Professional (SOACP) program is dedicated to excellence in the field of SOA and service-oriented computing. Through a series of seasoned course modules and exams, IT professionals have the opportunity to obtain a number of different certifications to recognize their accomplishment of gaining "project ready" SOA proficiency. This comprehensive and strictly vendor-neutral program was developed in cooperation with best-selling SOA author Thomas Erl and several major SOA organizations and academic institutions. Through the involvement of the SOA Education Committee, course contents and certification requirements are constantly reviewed and revised to stay current with developments in the service-oriented computing industry. The program is currently comprised of 12 course modules and 5 certifications and is expanding to 18 course modules and 8 certifications throughout 2009. For more information, visit www.soaschool.com and www.soacp.com. Blog Twitter LinkedIn Mix Forum Wiki Back to top YOUR CONTENT ON THE NEWSLETTER AND ON THE SOA COMMUNITY PORTAL Publishing Your StoriesWe would like to invite our partners to publish information in the newsletter or on our SOA Community portal. Especially we are looking for your real life experience with our SOA technology. Please send your documents to Jürgen Kress. We look forward to getting your suggestions! Back to top SOA DISCUSSION FORUM BECOMES INTERACTIVE AT THE SOA COMMUNITY! Do you want to chat to experts, including partners and Oracle SOA Product Development? Do you want to get the latest information about our SOA solutions and events?Attend our private online SOA Discussion Forum at OTN. Please send your OTN forums user name to Brigitte Felisaz. You must be a registered user to access the SOA Discussion Forum. Back to top INVITE YOUR COLLEAGUES TO JOIN THE SOA COMMUNITY Please feel free to invite your colleagues to join the SOA Community and to participate in the SOA Assessment tests. For registration please login the Oracle PartnerNetwork and go to: www.oracle.com/goto/emea/soa For any questions on the above or concerning SOA and Oracle in general please contact the Oracle EMEA Alliances & Channels SOA Team. Best regardsOracle EMEA SOA TeamJürgen Kress Jürgen KressSOA Partner Adoption EMEATel. +49 89 1430 1479E-Mail: [email protected]

Search Results

Search found 29317 results on 1173 pages for 'device control'.

Page 1168/1173 | < Previous Page | 1164 1165 1166 1167 1168 1169 1170 1171 1172 1173 | Next Page >

- by MasterRoot24

- by Yarin

- by cf16

- by aardvarkk

- by ErikE

- by stkdev248

- by Luis

- by MasterRoot24

- by Rick

- by Austin

- by Emtucifor

- by frankcheong

- by einpoklum

- by Rubytastic

- by juyoung518

- by Robert

- by JustinP

- by Justin

- by varun

- by Max

- by user2697032

- by user3014909

- by sabby

- by Atharul Khan

- by mseika

< Previous Page | 1164 1165 1166 1167 1168 1169 1170 1171 1172 1173 | Next Page >