Search Results

Search found 6625 results on 265 pages for 'advice'.

Page 118/265 | < Previous Page | 114 115 116 117 118 119 120 121 122 123 124 125  | Next Page >

• How to run statically linked programs on a shell account?

  - by user1125872

  I have a shell account where I am not allowed to compile anything. There are however tools I need to run, some very simple ones like Midnight Commander, mcedit, most, jed I am trying to find a staically linked version that "just works" in my shell. Could anyone give me any advice on where I could find statically builds? I have not been able to find it with google. I could compile it myself, but I would have to find out which headers I need to compile for. I have never tried to do it before, so any help would be greatly apprechiated! My host uses CloudLinux, output of uname -a: Linux hostname.domain.com 2.6.18-408.el5.lve0.8.61.1 #1 SMP Wed Apr 18 07:47:15 EDT 2012 x86_64 x86_64 x86_64 GNU/Linux

  Read the article

• WindowsXP+7 on C:/D: :moving the System Partition

  - by user938921

  I had installed Windows 7 on a separate 20gig partition, and I'm absolutely loving it! Plus I can now dual-boot, with my original WinXP residing on the C: drive. But I'm running out of disk space on D:, and I was able to shrink C: and expand D:. But now I would like to make D: not just a Boot Partition, but an Active System Partition, without losing my ability to boot into Windows 7 (since it was created on a separate D: partition, not the current Active System C: Partition). Any advice?

  Read the article

• Ubuntu 9.10 Dowload Speed Very Slow

  - by Don

  I'm running Ubuntu 9.10 desktop and I'm new to the Linux world, so bear with me. I'm on a corporate network of 3 T1s shared across 50-60 users. I typically get about 300 KB/sec for downloads, but for whatever reason, the Linux box will start out in that range, then drop to less than 1KB/Sec sometimes. Doesn't seen to matter where I'm downloading from. Right now I'm trying to get Eclipse for PHP and it's running at 3-6KB/sec. Getting the updates for the system will also drop to very slow rates. Our IT person has set up the machine to get the same 10.0.0.x address when it starts, and moved this IP to bypass our Proxy/Firewall going out, so that shouldn't be the issue. Can anyone recommend something I can try to better diagnose the problem. Again, I'm new to the Linux world and the hardware/OS setup side in general (coming form more of a coding background). Thanks for any advice.

  Read the article

• Reset my windows server 2003

  - by Tim Thoirp

  I was recently given an HP Proliant Server from a friend as a gift. It has Windows Server 2003 installed on it. When I go to boot the system however to log in to Windows Server 2003 it requires an Admin password. I can't figure out the password and my friend doesn't know it either as it has been years since hes used the machine. I don't care about any of the data on the machine I just want to have a new clean version of Windows server 2003 running on it. Any advice would be helpful? And no I don't want to pay for a password cracking tool. Thanks

  Read the article

• What do I put on my developers box in regard to SharePoint 2010

  - by Jisaak

  So we are venturing out into the world of SharePoint and it seems that I have to install SharePoint Server directly on each developer's box. Is this correct? I have SharePoint up and running on a separate sever so it seems redundant to have to install it on each box. Not to mention installing SharePoint on Windows 7 is a pain in the ars. I'm just trying to clarify how to correctly set the environment up. I've been using this link as a guide so far: http://msdn.microsoft.com/en-us/library/ee554869(office.14).aspx Any advice is greatly appreciated!

  Read the article

• Remote desktop connection over internet without port forwarding?

  - by hellbell.myopenid.com

  Hello, let's say that we have this situation. I want to remote desktop connection to my friend over the internet, but I don't have premission for port forwarding on the router, and my friend also can't configure his router. So the question is how to connect to computer without port forwarding, I know that is out there some programs like teamviewer, or some else that solve that task, but what I looking for is the some free site that can make "bridge" between are two computer, or is it possible to install on computer some program that simulate virtual router or something like this http://www.youtube.com/watch?v=SIof7kFTgJE .... I need this cause I have my own simple remote desktop connection program, but I can't connect to other computer outside network cause don't have premission to configure router :( any comment, link, advice, or tutorials will be very helpful :)

  Read the article

• ubuntu server refusing connections via port forwarding

  - by Matt

  Getting some really weird behavior from our Ubuntu server... it's behind a Verizon router firewall with port forwarding (port 8080 to port 80 on the server), and we've been having issues accessing it via this external IP. From within the network, it appears to respond normally (I can access it via web browser and SSH), but refuses connections through port forwarding (using our static external IP). The strangest thing is that it actually responds to external port-forwarded connections right after being restarted, but quickly lapses back into this pattern of refusing external connections. I'm a bit of a server newbie (I'm actually a programmer in a small startup that just lost their server ops guy, urgh) so this is all trial by fire for me. Does anyone have any advice on what could be going wrong here? Any help would be appreciated, thanks.

  Read the article

• VPN server on Windows Server 2008 for a small office

  - by cmbrnt

  I'm going to refurbish the IT-infrastructure for a small organization with one single office, and I'm not sure what VPN server to use. In your opinion, would the built-in Windows Server 2008 VPN server suffice or are there any specific problems with it as opposed to, for example, OpenVPN? I'd rather run a Windows native VPN server, but if there are few (preferably free) good alternatives, I could install VMware ESXi and virtualize both Windows and an OpenVPN-server. By the way, because of a low budget this office runs a solution with only one physical server. Any advice would be great to help me grasp this field of which I'm quite a novice. Thank you!

  Read the article

• Cannot delete folder - Content seems to be nested recursively

  - by RikuXan

  I cannot delete a folder located on my hard disk by any means. I don't quite know how it was created, all I know is, that it is a pretty deep structure of folders (too deep to delete it at once, since Windows restriction path name too long), but the problem in the end is, that I can't "pull out" the inner folders, because they don't seem to be folders anymore (Context menu lacks things like "Properties", "Cut", "Copy", "Delete" etc.) Here a picture of how a right click looks like on one of these "folders": As you can see, the current folder is in very deep, but that is not the problem, rather the one I left-clicked on. Has anyone any advice on how to get rid of these? I tried a chkdsk, said no errors. I also tried deleting those folder via a VMWare Ubuntu, to no success. I also tried a batch file from a volunteer at MS boards, that should automatically de-nest such folders, but I guess mine is a special case, since the tool only created more such folders.

  Read the article

• How are Linux files and applications organized?

  - by doup

  Hi there, I'm a newbie Linux (Ubuntu) user and I'll like to know if someone can give some advices of where to install stuff, which folders don't touch, which is the meaning of each folder and so on. My first concern is, should everything go into my home folder? I've installed "manually" Komodo Edit (it's an IDE) and it has gone to my home folder, I really don't like the idea of having an application there. (in windows I used to have my workfiles/pictures/downloads... partition and then the OS partition with all the apps). So, is there any place where I could install this software? Any advice for having my home folder ordered? Maybe I should create an apps folder in my home dir? Thanks in advance. :) pd: most of the time I use apt to install stuff, but I don't always found the software I want there...

  Read the article

• Crontab + .sh + php

  - by Kristaps Karlsons

  Hi. I'm trying to call a shell script every 5 minutes, witch executes php file under root. # crontab -l */5 * * * * /home/regularuser/call.sh permissions: -rw-rw-rw- 1 root root 162 Jun 6 23:40 call.php -rwxr-xr-x 1 root root 66 Jun 7 01:20 call.sh call.sh contents: #!/bin/bash php -q /home/regularuser/call.php echo "request processed" My problem is that my php file doesn't get executed via crontab. However, if I call call.sh - everything works perfectly. I'm new to crontab and shell scripting, so any advice/resources are welcome.

  Read the article

• Jail user to home directory while still allowing permission to create and delete files/folders

  - by Sevenupcan

  I'm trying to give a client SFTP access to the root directory of their site on my server (Ubuntu 10.10) so they can manager their website themselves. While I have been successful in jailing a user to a directory and giving them SFTP access; they are only allowed to create and delete new files in sub directories (the directories they own). This means that I must give them access to the parent directory to the root of their site. How can I limit them to the root of their site (for example public_html) while still allowing them the ability create and delete files. All the tutorials I have read suggest that the root must be the owner of the user's home directory, which prevents them from write access inside that directory. I'm relatively new to managing my own server so any advice would be very grateful. Many thanks.

  Read the article

• solaris + match the network device name according to IP address

  - by yael

  how to find the device name as ( e1000g2 , e1000g3 , etc ) according to his IP address on Solaris machine for example ifconfig -a | grep 10.106.134.133 inet 10.106.134.133 netmask ffffff00 broadcast 10.106.134.255 ifconfig with grep command view only the line with the IP address , and the device name appears before the IP address so my target is to match the device name according to the IP address on Solaris machine , and then insert the device name in to parameter ( ksh ) please advice? full example: from ifconfig -a ( I get the IP and device name , what I need is to find the device name according to IP address , and insert the device name in to parameter ) e1000g2: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 inet 10.106.134.133 netmask ffffff00 broadcast 10.106.134.255

  Read the article

• Import EML emails into Outlook 2010 64-bit

  - by nness

  Evening everyone. I'm helping setup a small office network, where a number of old PC's are being replaced with new ones with a 64-bit copy of Outlook 2010. The old emails were stored in Windows Live Email, and were exported as .eml files (since we were replacing the machines). All the support I can find indicates that .eml files could simply be dragged-and-dropped into a folder in Outlook 2010, and it will import them correctly. However, it seems this is not the case in the 64-bit versioin, where dropping in .eml files results in a new message being created with these files as attachments. We can re-download the most of the emails off the server if need be, but there were user folders which were not on the server which we were hoping to import. Any advice would be fantastic at this point!

  Read the article

• 3 Monitors on a Notebook

  - by Rihan Meij

  I would like to use 3 screens on my Dell Inspiron 1720 So On the laptop built in screen have that as one, and then have 2 more screens. The catch is, that I want to play racing games with this set-up. So that my main screen is the focus area (the front window if you will) and the other 2 screens will be used for peripheral vision, on the side. The software that I use (LFS.net) does support multiple screens. However the notebook can have the main screen on, and another external screen. So I would need to split this "second" monitor output, to 2 screens, the one to the left of the main monitor, and the other one to the right. Is this possible? Is there perhaps a external card / docking station solution that could help with this? Any advice or ideas is greatly appreciated. Best Regards Rihan

  Read the article

• WD Elements Desktop External - Not recognised on a single computer

  - by Aelexe

  My WD Elements Desktop External is no longer recognised on my main computer. It has worked fine in the past, but now all of a sudden is not detected. It does not prompt when plugged in, nor does it show up in the disc management interface or the device manager. It appears to be aware that it is plugged in however as the light on the external blinks rapidly for a short while after being plugged in. The strangest thing however is that it works fine on other computers, including my family computers and my laptop. I have attempted to troubleshoot the issue by trying various USB devices in multiple ports on each system to see if there is any correlation with the issue, but have come up with nothing that gives me an idea of what is going on. I have also attempted to format the external using my laptop, but that has not helped either. If anyone has had a similar issue, or knows of any potential solutions, please post your advice. Thanks for your time.

  Read the article

• In place SQL 2008 upgrade vs. Side by side?

  - by Jim

  I have a SQL 2005 Std edition server with 5 databases in production, 4 db's are used by web-based apps the 5th is a desktop application. My question is should I perform an in-place upgrade or a side-by-side by creating an sql2008 instance on the same box? The machine is a VM on vmware and I'm planning on taking a snapshot before the upgrade and having a 'blackout' window during the upgrade so that I could roll back to the snapshot if things go really bad. Any previous experience and advice is appreciated.

  Read the article

• PostgreSQL, update existing rows with pg_restore

  - by woky

  Hello. I need to sync two PostgreSQL databases (some tables from development db to production db) sometimes. So I came up with this script: [...] pg_dump -a -F tar -t table1 -t table2 -U user1 dbname1 | \ pg_restore -a -U user2 -d dbname2 [...] The problem is that this works just for newly added rows. When I edit non-PK column I get constraint error and row isn't updated. For each dumped row I need to check if it exists in destination database (by PK) and if so delete it before INSERT/COPY. Thanks for your advice. (Previously posted on stackoverflow.com, but IMHO this is better place for this question).

  Read the article

• What is name server of my domain, pointing to hosted site on Github Pages?

  - by nournia

  I've got one domain name and I want to set it up for my hosted site on Github Pages service. In the documentation this point is mentioned that If you are using a top-level domain like example.com, you must use an A record pointing to 204.232.175.78. But my domain registrar doesn't permit me to add a DNS Record. But only asks me to fill one table like this: Name Server (NS Record) Server Name ......... | Server IP ns53.parsihost.com | 94.232.173.52 ns2.parsihost.com | 206.223.171.254 I asked the registrar about this problem and they said to me "You must put Github's name server in those cells". So, what is the mapping from this table to DNS Records, and what is your advice for filling this kind of table?

  Read the article

• Force RAID to read exiled disk?

  - by user198847

  user user197015 asked on 1th of November the following question: "We have a RAID 6 array (Infortrend EonStor DS S16F) that recently had two disks fail. Immediately prior to replacing these two disks, a third, good, disk was accidentally ejected from the array. After reinserting this disk it is marked as "exiled" by the array's firmware, and so even after replacing the two failed disks with new ones the array refuses to rebuild the logical volume and remains inaccessible. Since the temporarily-ejected disk is still functional and nothing has been written to the array since it was ejected, it seems that it should theoretically be possible to recover all the data on the array, but how can we convince the array to use the data from the "exiled" disk? Thanks for any help or advice you can offer." Now I've got quite the same problem. The post has been deleted by the user, so I don#t know if he was successful. Is there anybody who can help me? Thank you!

  Read the article

• How can I improve the rendering performance of this old DOS application?

  - by MicTech

  I have very old DOS Application (CadSoft Eagle - PCB Designer) and I want to work with it on my workstation with Windows 7. Then I install Windows 98 and that software into VmWare Player. But that software has serious problem with redrawing screen. It's very slow in comparison with my Intel Celeron 333MHz with Windows 98. I have same problem if I try to use DOSBox on Windows XP (same Celeron 333MHz). I also trying run this application directly on Windows XP (same Celeron 333MHz) with compatibility mod set to "Windows 98", but I get "(0Dh): General Protection Fault". Can someone give me good advice how I solve that?

  Read the article

• Set up a "relay" service

  - by trikks

  Hi! I'm trying to create a 'left client' server < 'right client' setup but need some advice and tips. Let's say that I have a server-daemon on the left side, like a vnc-server that connects to the middle server. On the right side I've got a client that want to connect to the left server-daemon, but it has to be done through the middle server. I assume this should be done with some tunneling service. The server environment is a fully featured Debian Linux or Mac OS X Server host. Any idéas? Thanks / Trikks

  Read the article

• Additional Hard Drives for Servers

  - by Abs

  Hello all, I am developing a web app where I will have to save lots of files and I am just trying to work out the directory structure and where things should be saved to. I have had a look at the dedicated server I want to buy and for storage it shows this: 2x 1TB SATA in RAID1 The space is enough but I am guessing this will not be on one hard drive? I will have to save files on one hard drive and when that fills up, I have to use the other? For the Fedora distro - what is the path for the second drive? Is there a primary drive where I will be able to setup my webroot? I am sorry, this is all new to me. It would be great to links and advice on how things actually work when it comes to additional hard drives etc. Thanks all

  Read the article

• how to communicate in typical router switch router scenario?

  - by Kossel

  I'm learning routing using packet tracer simulation and I think this is a very commun scenario: let's say pc4 is the server... why I can't ping from PC1 to 192.168.2.253 (router1) but I can ping 192.168.2.2 (pc0) aren't they the same subnet? what am I missing or have to do in order to reach pc4? (192.168.100.254) from pc 1 (192.168.1.1) is there something like "default gateway" for router? thanks for advice PS: during the simulation it shows error "The routing table does not have a route to the destination IP address. The router drops the packe (from 192.168.2.253 to 192.168.1.1)"

  Read the article

• Why does 'dd' not work for creating bootable USB?

  - by jdowner

  Recently I wanted to create a bootable USB of Linux mint. I found that there was a lot of conflicting advice/experience about whether the 'dd' command could be used to create a bootable USB. I decided to download an ISO and try. While dd definitely put the image on the USB stick it was not bootable. So my question is what is the magic ingredient that will make this work or why has this approach persisted if it does not work? This is the command I used, dd if=/mint/iso/image of=/dev/sdb1 oflag=direct

  Read the article

< Previous Page | 114 115 116 117 118 119 120 121 122 123 124 125  | Next Page >