Search Results

Search found 19446 results on 778 pages for 'naive machine learner'.

Page 118/778 | < Previous Page | 114 115 116 117 118 119 120 121 122 123 124 125  | Next Page >

• Unable to access network resources through VPN

  - by fbueckert

  I'm currently attempting to connect one of our computers in the office to a client VPN. My development machine is running Windows 7, and can connect and see resources just fine. The problem computer is running Windows XP. They're both within the same network. Using the same credentials at both computers, the VPN connection (using the built in Windows network connections) works just fine. So far, so good. An IP address is assigned, and comparing both machines shows they're still in the same subnet. The problem is that the XP machine cannot see ANY of the computers in the client network. I tried a tracert to a target machine on the Windows 7 box, and the first item that comes up is the .0 address. Pinging it gives responses. Trying it on the Windows XP machine, however, comes up with just timeouts. Trying to trace to www.google.com allows the address to resolve (probably part of the cached resolutions), but results in just timeouts. I double-checked to make sure that the Windows firewall was not on, and trying to open the settings brings up a notification that the firewall service wasn't running, which leads me to believe that it's definitely not on. From my best guess, I've managed to connect the XP machine to a black hole of some sort. There's obviously something strange going on, but I'm not sure where I should be looking.

  Read the article

• How can I find a computer on my network that is doing mass mailings?

  - by Alex Ciarlill

  I was notified by my isp that one of my machines is sending out spam. This happened about 3 months ago on windows machine running cygwin that was hacked due to an SSH vuln. The hackers setup IIS and SMTP. I cleared out the machine and all the services are disabled so I think that machine is okay I am wondering if there is any other way to identify which machine it could be coming from? The ISP has NO useful information such as source port, destination port, destination IP... nothing. I am running DD-WRT on my router, Windows 7 PC and a Windows XP PC.

  Read the article

• Monitor not detected after booting without monitor attached (12.04)

  - by cawkie

  I had a stable 12.04 machine running perfectly. The machine was booted without the monitor connected - since then the system always boots to low graphics mode. Onboard graphics (from lspci): VGA compatible controller: Intel Corporation 4 Series Chipset Integrated Graphics Controller (rev 03) Monitor: AOC e2450Swh Display widget shows monitor as laptop(!?) and system details shows graphics as Gallium 0.4 on llvmpipe (LLVM 0x300) X-server log appears to show correct monitor detected. When I boot from a live CD I get full 3d graphics I've tried the monitor on a different machine - all OK. I've tried a different monitor on this machine - same problem. Between having a working system and a broken one there have been no updates and I have made no configuration changes... EDIT: I have come to the conclusion that the problem is caused by a known issue with lightDM hanging on battery check. I've managed to get 3D graphic working by switching to using GDM - not a solution but acceptable workaround. I would still like to know what is causing the problem and how I managed to get my system into this state!

  Read the article

• How to create a snapshot volume to a remote server?

  - by Purres

  I want to backup a few virtual machines to a backup server. Here're the backup steps. suspend a virtual machine create a snapshot of the virtual machine using lvcreate -s resume a virtual machine dd if=/virtual_machine_path | lzop > /temp/backup.lzo rsync /temp/backup.lzo -e "ssh " 1.2.3.4:/backup_path/ However, the hypervisor server doesn't have enough hard disk space to create a snapshot in step 2. Is there a way to create a logical volume snapshot to a remote server?

  Read the article

• Reconciling vmware memory vs windows memory usage

  - by RyanW

  I have a Windows 2008 R2 64 bit virtual machine on ESXi 4.1 host. The host reports that the virtual machine is actively using less than 1 GB of memory. But, in Windows it's reporting the machine is using 7 GB of memory, even though the total of the processes listed in task manager is less than 1 GB. The machine is rather unresponsive and I'm concerned this is impacting other applications (server's purpose is to run ASP.NET state server process, which has been having trouble and led me to spot the memory question). I just noticed High memory usage Windows Server 2008r2 on VMware and will be looking through those documents more, but what is causing this?

  Read the article

• Joining Samba to Active Directory with local user authentication

  - by Ansel Pol

  I apologise that this is somewhat incoherent, but hopefully someone will be able to make enough sense of this to understand what I'm trying to achieve and provide pointers. I have a machine with two network interfaces connected to two different networks (one of which it's providing several other services for, such as DNS), running two separate instances of Samba, one bound to each interface. One of the instances is just a workgroup-style setup using share-level authentication, which is all working fine. The problem is that I'm looking to join the other instance to an MS Active Directory domain (provided by MS Windows Small Business Server 2003) to enable a subset of the domain users to access the shares from Windows machines on the other network. The users who need access from the domain environment have accounts (whose names are all-lowercase versions of their domain usernames) on the machine running Samba, but I'm not sure about how to map the UIDs and everything I've read concerns authenticating accounts on that machine against either AD or another LDAP server. To clarify: I only want the credentials for AD users accessing the non-workgroup Samba instance to be authenticated against AD, not the accounts on the machine running Samba. I hope this is sufficiently clear. EDIT: In addition to being able to access the Samba shares from AD, I do also need to be able to access a share on the domain from the machine running Samba but would still like everything non-Samba-related to authenticate locally.

  Read the article

• Multicast in private LAN with different subnets

  - by Gobliins

  after i read Multicast IP Addresses and Multicast accross the subnets I am confused. Configuration: I have two devices in the same network. They may not be in the same Subnet, but always in the same physical network (beyond the same router, switch etc.) I want to communicate across IP multicast either 224.x.x.x or 239.x.x.x may be more fitting because we want it local, not beyond of forward through the router. Can one machine be the receiver and the other machine sender of the same multicast address? and can the receiving machine send an answer to the sending machine?

  Read the article

• How to get this printer working in Windows 7 over a network?

  - by George Edison

  Here is the setup: Router Windows XP 32-bit Windows 7 64-bit The XP machine has a Lexmark printer physically attached. I have installed the x64 drivers for the printer installed in Windows 7. When I try to print to the printer on the Windows 7 machine, it doesn't work - I get an error: Windows cannot connect to the printer. Error 0x0000000d I have made sure UDP/TCP ports 135-139 are unblocked on the Windows 7 machine.

  Read the article

• Current SPARC Architectures

  - by Darryl Gove

  Different generations of SPARC processors implement different architectures. The architecture that the compiler targets is controlled implicitly by the -xtarget flag and explicitly by the -arch flag. If an application targets a recent architecture, then the compiler gets to play with all the instructions that the new architecture provides. The downside is that the application won't work on older processors that don't have the new instructions. So for developer's there is a trade-off between performance and portability. The way we have solved this in the compiler is to assume a "generic" architecture, and we've made this the default behaviour of the compiler. The only flag that doesn't make this assumption is -fast which tells the compiler to assume that the build machine is also the deployment machine - so the compiler can use all the instructions that the build machine provides. The -xtarget=generic flag tells the compiler explicitly to use this generic model. We work hard on making generic code work well across all processors. So in most cases this is a very good choice. It is also of interest to know what processors support the various architectures. The following Venn diagram attempts to show this: A textual description is as follows: The T1 and T2 processors, in addition to most other SPARC processors that were shipped in the last 10+ years supported V9b, or sparcvis2. The SPARC64 processors from Fujitsu, used in the M-series machines, added support for the floating point multiply accumulate instruction in the sparcfmaf architecture. Support for this instruction also appeared in the T3 - this is called sparcvis3 Later SPARC64 processors added the integer multiply accumulate instruction, this architecture is sparcima. Finally the T4 includes support for both the integer and floating point multiply accumulate instructions in the sparc4 architecture. So the conclusion should be: Floating point multiply accumulate is supported in both the T-series and M-series machines, so it should be a relatively safe bet to start using it. The T4 is a very good machine to deploy to because it supports all the current instruction sets.

  Read the article

• How do UEFI and virtual machines relate to each other?

  - by Iterator

  I am trying to get my head around UEFI (Unified Extensible Firmware Interface) and it's not entirely clear to me how this affects virtual machines. Thus, there are three parts to this question: Is UEFI an advance in hardware support for virtualization? All other things being equal, would a machine with UEFI be more likely to run a virtual machine more efficiently than one without, or does UEFI cause any performance hits that negate any speed improvements from a virtual machine? Would the difference in execution be visible to code running in a virtual machine? (In theory, it shouldn't, but in practice?)

  Read the article

• Performance degrades for more than 2 threads on Xeon X5355

  - by zoolii

  Hi All, I am writing an application using boost threads and using boost barriers to synchronize the threads. I have two machines to test the application. Machine 1 is a core2 duo (T8300) cpu machine (windows XP professional - 4GB RAM) where I am getting following performance figures : Number of threads :1 , TPS :21 Number of threads :2 , TPS :35 (66 % improvement) further increase in number of threads decreases the TPS but that is understandable as the machine has only two cores. Machine 2 is a 2 quad core ( Xeon X5355) cpu machine (windows 2003 server with 4GB RAM) and has 8 effective cores. Number of threads :1 , TPS :21 Number of threads :2 , TPS :27 (28 % improvement) Number of threads :4 , TPS :25 Number of threads :8 , TPS :24 As you can see, performance is degrading after 2 threads (though it has 8 cores). If the program has some bottle neck , then for 2 thread also it should have degraded. Any idea? , Explanations ? , Does the OS has some role in performance ? - It seems like the Core2duo (2.4GHz) scales better than Xeon X5355 (2.66GHz) though it has better clock speed. Thank you -Zoolii

  Read the article

• How to add a song to the iPod or iPhone if it was sync'ed with another computer?

  - by Jian Lin

  I had a Vista machine and my iPhone was sync'ed to that machine. But after I got a new machine with Windows 7, I moved that old computer away and is not using it. So now I installed iTunes on this new Win 7 computer, and bought a new song from the iTune store, but I can't add this song to the iPhone. It seems I have to erase all songs on the iPhone in order to add this one song?

  Read the article

• About the External Graphics Card and CPU usage

  - by Balaji

  Hi, We are Rendering 16 live Streams at our client machine through one of our applications and the resolution of the video streams are as 4CIF/MPEG4/25FPS/4000Kbits. The configuration fo the client machine is below. HP Desktop Machine: Microsoft Windows XP Intel (R) Core2 Duo CPU E8400 @ 3.00 GHz 2.99 GHz, 1.94 GB of RAM Intel (R) Q45/Q43 Series Express Chipset (Inbuild) The CPU usage of the machine peaks 99% for 16 straems. After some discussion, we had decided to install external graphics card to reduce the CPU usage. So that, we have tried following graphics cards. NVIDIA Quadro NVS 440 - 128 MB Radeon HD 4350 - 512 MB GDDR2 Redeon HD 4350 - 1GB DDR2 ASUS EAH 4350 Silent 1GB DDR2 But the performance wise no difference, even worst. So, what is the pupuse of these external graphics cards? Really it will reduce the CPU usage? What parameters have to check, if we want to reduce the CPU usage? Please do the needful as soon as possible. Regards Balaji

  Read the article

• Issues with VPN functionality

  - by Xorandor

  I've been working on setting up VPN connectivity to our office location. We bought a Cisco WRV210 which have a builtin VPN server. Cisco has some software QuickVPN, which is not as quick and easy as I had thought. I've had mixed experiences on different machines with connecting. Instead I configured an IPSec VPN tunnel following a guide from TheGreenBow here http://www.thegreenbow.com/doc/tgbvpn_cg_linksys_wrv200_en.pdf I followed their instructions and tried out an evaluation of their software, and VPN connection should be working ok. I'm able to do RDP to a machine on the network (using IP address, not machine name) and ping the router etc. What I'm trying to solve are two things: It's not like I'm "really" on the network. Or at least I'm restricted to some degree when going through the VPN. I can't access a machine on the network using machine name, only IP. I can't ping a machine, but the router just fine. Could this be that something is not set up properly? If so, I can ofcourse supply additional information. Second, when I log onto the VPN, I would really like my outgoing connection to go through the internet connection of the remote location. Basically if I connect to the VPN I want my outgoing IP to be that of the remote location's (needed for some IP resctrictions on some of our servers). At a previous work location it worked like this when we connected to our office VPN over PPTP and the builtin windows VPN client. I'm not a huge expert on the topic, so any hints will be appreciated.

  Read the article

• 2 GPUs (for multi-monitor setup)

  - by A Dwarf

  I have a machine to which I need to connect a second monitor. This machine currently hosts a ATI Radeon HD 4770 with two DVI adapters. The second monitor to be hooked to this machine is a VGA monitor. Until I find a DVI-VGA adpater, I'm thinking installing a second graphics card which does have a VGA adapter, an NVidia card. Can I successfully run both AMD and NVidia cards on this machine? Any specifics I must be aware of, like how to ensure the ATI card to be the main card? Operating system is Windows 7

  Read the article

• Create an AWS AMI for Ubuntu with GUI which automatically launches web browser

  - by Rory MacDonald

  I've got an ubuntu AMI setup with ubuntu desktop installed and Chrome installed and set to boot on load (via the startup programmes menu within the ubuntu desktop) I've created an image of this AMI, but any time I launch a new instance running this, the Ubuntu GUI doesn't seem to load, until I SSH into the machine, enable VNC and then connect via Chicken VNC to the machine. At that point, the desktop appears to load + starts the browser. I really need the machine to boot and the browser to load without having to VNC into the machine.. Any help would be appreciated.

  Read the article

• Ubuntu 13.04 under Parallels Desktop - Black Desktop after X Windows Update

  - by Bob Reckhow

  I have been running Ubuntu 13.04 successfully on a MacBook Pro in a virtual machine in Parallels Desktop 9. Today (2013-10-17) after applying today's Ubuntu update, which included updates to X Windows, my Ubuntu 13.04 virtual machine launches, the launcher comes up, but the screen background is solid black, rather than the shaded orange colour of the default desktop background (and my desktop icons are "hidden behind this blackness", as well). I can launch applications from the launcher, and there is a very brief white flash on the screen, and then it returns to black. It's as if there is a "black blanket" covering the entire screen, so there is no way to interact with any application windows using the keyboard or mouse. The icons of the launcher are responsive to the mouse, so I can right-click and quit any application I have launched. But the rest of the screen is non-responsive to keyboard or mouse. This same behaviour happens with two different versions of Parallels Tools, so I am quite sure this is not a Parallels problem per se, although I could believe that it could be a paroblem with the interface between Parallels and this new updated X Windows code. Could anyone tell me what has happened, and how I might be able to fix this problem, so I can continue to use my Ubuntu 13.04 virtual machine? (I do have the option of reverting to a previous version of my virtual machine from before this update, but if possible I would prefer to keep my version of Ubuntu 13.04 up to date with the latest updates.) Thanks, Bob

  Read the article

• Target to browse in order to insert a file

  - by Abid

  I have created an application using PHP and HTML. I insert it in my Linux server. I open it from my windows machine using the browser. I should in this application insert a file. When i click "insert file", instead of i have a window that browse the Linux server , i get a window that browse my local machine. And when i click insert , nothing is copied to the server. The code to insert file is: Filename: <input type="file" name="file" id="file"> So what should i do to force this application to browse the Linux machine when i open it from my local machine?

  Read the article

• Selecting Interface for SSH Port Forwarding

  - by Eric Pruitt

  I have a server that we'll call hub-server.tld with three IP addresses 100.200.130.121, 100.200.130.122, and 100.200.130.123. I have three different machines that are behind a firewall, but I want to use SSH to port forward one machine to each IP address. For example: machine-one should listen for SSH on port 22 on 100.200.130.121, while machine-two should do the same on 100.200.130.122, and so on for different services on ports that may be the same across all of the machines. The SSH man page has -R [bind_address:]port:host:hostport listed I have gateway ports enabled, but when using -R with a specific IP address, server still listens on the port across all interfaces: machine-one: # ssh -NR 100.200.130.121:22:localhost:22 [email protected] hub-server.tld (Listens for SSH on port 2222): # netstat -tan | grep LISTEN tcp 0 0 100.200.130.121:2222 0.0.0.0:* LISTEN tcp 0 0 :::22 :::* LISTEN tcp 0 0 :::80 :::* LISTEN Is there a way to make SSH forward only connections on a specific IP address to machine-one so I can listen to port 22 on the other IP addresses at the same time, or will I have to do something with iptables? Here are all the lines in my ssh config that are not comments / defaults: Port 2222 Protocol 2 SyslogFacility AUTHPRIV PasswordAuthentication yes ChallengeResponseAuthentication no GSSAPIAuthentication no GSSAPICleanupCredentials no UsePAM yes AcceptEnv LANG LC_CTYPE LC_NUMERIC LC_TIME LC_COLLATE LC_MONETARY LC_MESSAGES AcceptEnv LC_PAPER LC_NAME LC_ADDRESS LC_TELEPHONE LC_MEASUREMENT AcceptEnv LC_IDENTIFICATION LC_ALL AllowTcpForwarding yes GatewayPorts yes X11Forwarding yes ClientAliveInterval 30 ClientAliveCountMax 1000000 UseDNS no Subsystem sftp /usr/libexec/openssh/sftp-server

  Read the article

• Virsh: Different XML with edit than dumpxml. Why?

  - by Dave Vogt

  I'm trying to fetch the VNC access data from a virtual machine managed by libVirt. However, when I run virsh dumpxml $machine, the vnc passwd is missing: <graphics type='vnc' port='-1' autoport='yes'/> Checking the same using virsh edit $machine, I see the password is actually there: <graphics type='vnc' port='-1' autoport='yes' passwd='asdf'/> Why is this? Is this intentional (what reason?), or could this be a bug?

  Read the article

• Domain: Netlogon event sequence

  - by Bob

  I'm getting really confused, reading tutorials from SAMBA howto, which is hell of a mess. Could you write step-by-step, what events happen upon NetLogon? Or in particular, I can't get these things: I really can't get the mechanism of action of LDAP and its role. Should I think of Active Directory LDS as of its superset? What're the other roles of AD and why this term is nearly a synonym of term "domain"? What's the role of LDAP in the remote login sequence? Does it store roaming user profiles? Does it store anything else? How it is called (are there any upper-level or lower-level services that use it in the course of NetLogon)? How do I join a domain. On the client machine I just use the Domain Controller admin credentials, but how do I prepare the Domain Controller for a new machine to join it. What's that deal of Machine trust accounts? How it is used? Suppose, I've just configured a machine to join a domain, created its machine trust, added its data to the domain controller. How would that machine find WINS server to query it for Domain Controller NetBIOS name? Does any computer name, ending with <1C type, correspond to domain controller? In what cases Kerberos and LM/NTLM are used for authentication? Where are password hashes stored in, say, Windows2000 domain controller? Right in the registry? What is SAM - is it a service, responsible for authentication and sending/storing those passwords and accompanying information, such as groups policies etc.? Who calls it? Does it use Active Directory? What's the role of NetBIOS except by name service? Can you exemplify a scenario of its usage as a "datagram distribution service for connectionless communication" or "session service for connection-oriented communication"? (quoted taken from http://en.wikipedia.org/wiki/NetBIOS_Frames_protocol description of NetBIOS roles) Thanks and sorry for many questions.

  Read the article

• mounts aren't case-sensitive

  - by Asi

  I mounted a few drives from Linux boxes in my network, but those mounts aren't case-sensitive. The mount command I used ( from the man mount.cifs, case-sensitive should be the default ): mount //10.0.1.10/remote_folder /local_folder -t cifs -o username=xxxx,password=xxxx but those mounts aren't sensitive. for example doing: ls -l /local_folder/testfile.txt ls -l /local_folder/TESTFILE.TXT give's the same result... instead of 'file not found' Couple of important points: All drives are running on Linux machines. My local machine is running Fedora 18 and it is case-sensitive for ANY folder/file expect the mounted drives. All drive/mounts are case-sensitive when when doing SSH. So if I SSH from my local machine to a remote machine, doing ls -l /local_folder/TESTFILE.TXT will say file not found as it should. So I believe the issue is in my local machine and not in the way I did the mount. but I'm not sure where to look next (I'm new to Linux)

  Read the article

• About the External Graphics Card and CPU usage

  - by Balaji

  We are Rendering 16 live Streams at our client machine through one of our applications and the resolution of the video streams are as 4CIF/MPEG4/25FPS/4000Kbits. The configuration of the client machine is below. HP Desktop Machine: Microsoft Windows XP Intel (R) Core2 Duo CPU E8400 @ 3.00 GHz 2.99 GHz, 1.94 GB of RAM Intel (R) Q45/Q43 Series Express Chipset (Inbuild) The CPU usage of the machine peaks 99% for 16 streams. After some discussion, we had decided to install external graphics card to reduce the CPU usage. So that, we have tried following graphics cards. NVIDIA Quadro NVS 440 - 128 MB Radeon HD 4350 - 512 MB GDDR2 Redeon HD 4350 - 1GB DDR2 ASUS EAH 4350 Silent 1GB DDR2 But the performance wise there has been no difference - even a drop in performance. So, what is the purpose of these external graphics cards? Really it will reduce the CPU usage? What parameters have to check, if we want to reduce the CPU usage?

  Read the article

• Free Developer Day - Hands-on Oracle 11g Applications Development

  - by [email protected]

  Spend a day with us learning the key tools, frameworks, techniques, and best practices for building database-backed applications. Gain hands-on experience developing database-backed applications with innovative and performance-enhancing methods. Meet, learn from, and network with Oracle database application development experts and your peers. Get a chance to win a Flip video camera and Oracle prizes, and enjoy post-event benefits such as advanced lab content downloads.Bring your own laptop (Windows, Linux, or Mac with minimum 2Gb RAM) and take away scripts, labs, and applications*.Space is limited. "Register Now"  for this FREE event. Don't miss your exclusive opportunity to meet with Oracle application development & database experts, win Oracle Trainings, and discuss today's most vital application development topics.          Win two Oracle Trainings valued in $2500 each. Offered by SDT Learning Corp·         Oracle Application Express: Developing Web Applications (duración de 4 días)·         Oracle Fusion Middleware 11g: Java Programming Ed 1.1 (duración de 5 días)You can also be registered Calling to Jamielle Gandía at 787-999-3187Requirements by TrackFor .Net Track1) A windows machine with 2 GB memory2) Attendees must in advance of the show, download and install VMWare player:       http://www.vmware.com/products/player/3) Attendees should test their machine to make sure they can run an executable on an external USB hard drive (some corporate machines are locked down so they cannot do this)For Java TrackYou will save time if you install these applications in advance:1) A windows machine with 2 GB memory2) VirtualBox must be installed in each laptopWhat is virtual box? Where can I download it?For APEX Track1) A windows machine with 2 GB memoryOracle Corporate agenda @  HereNote:  (Limited to 50 people per Track)

  Read the article

• Why can't anyone else access my website in IIS on Windows 7?

  - by Rod

  I've got an ASP.NET application that I have in IIS on my Windows 7 Ultimate machine. I've tested it from that machine and it works fine. This machine is in my home network, a simple peer-to-peer network. The strange thing is that no one else in my network can access that website. Why is that? There are other Windows 7 machines here, and they're all in the some homegroup. When I attempt to access the website on my machine from one of the other machines, it fails and that's it. So, what's wrong?

  Read the article

< Previous Page | 114 115 116 117 118 119 120 121 122 123 124 125  | Next Page >