Search Results

Search found 4320 results on 173 pages for 'vertex arrays'.

Page 118/173 | < Previous Page | 114 115 116 117 118 119 120 121 122 123 124 125  | Next Page >

  • Why does HDTune report better performing drives 2 months after installing them?

    - by Rolnik
    OK, so this is really weird. I ran HDTune on a newly set-up home-built computer and got the following readings from my drives in mid-November. SSD 154 MB/s RAID1 87 RAID0 198 (software installs) RAID0 98 Swap drive Today, in January, I run HDTune (same version) and get these results, in MB/s: SSD 186 RAID1 98 RAID0 241 RAID0 98 (Swap drive) Here are more details that HDTune reports on the SSD drive: HD Tune: OCZ-VERTEX Benchmark Blockquote Transfer Rate Minimum : 135.4 MB/sec Transfer Rate Maximum : 219.4 MB/sec Transfer Rate Average : 185.7 MB/sec Access Time : 0.1 ms Burst Rate : 187.3 MB/sec CPU Usage : -1.0% To get to my question: Why are my hard drives improving in performance? Most of my logical drives are in some form of RAID, except for the SSD. Will this performance ever deteriorate? Note, none of my drives are a hybrid drive that uses some form of SSD to enhance the write/reads on actual platters.

    Read the article

  • How to speak to a computer

    - by SalemSeven
    I am a self taught.. NEW..programmer. The language I chose was Objective-C so I can write for Apple products. I have learned the hard way that Objective-C has a steep learning curve but have forced myself to look at it over and over until I get it. I feel I am completing one major step and that is becoming very comfortable with the syntax and now as I enter the next big step...finding out what is possible with a computer language - I am thinking that all software is just developed within the confines of classes-loops-booleans-IF/OR statements-variables-etc. Is that a true assessment? When thinking of software in my head do I just need to learn to convert it all to arrays-loops/variables/classes - IF/OR statements - etc? Sorry if this question sounds funny but I am just learning how to take the language in my head and talk (what I think is) the language of a computer. Is there a good book or tutorial that helps illustrate how to speak computer speak?

    Read the article

  • Is using build-in sorting considered cheating in practice tests?

    - by user10326
    I am using one of the practice online judges where a practice problem is asked and one submits the answer and gets back if it is accepted or not based on test inputs. My question is the following: In one of the practice tests, I needed to sort an array as part of the solution algorithm. If it matters the problem was: find 2 numbers in an array that add up to a specific target. As part of my algorithm I sorted the array, but to do that I used Java's quicksort and not implement sorting as part of the same method. To do that I had to do: java.util.Arrays.sort(array); Since I had to use the fully qualified name I am wondering if this is a kind of "cheating". (I mean perhaps an online judge does not expect this) Is it? In a formal interview (since these tests are practice for interview as I understand) would this be acceptable?

    Read the article

  • SSD on Vmware ESXI 4 (TRIM? Good Idea?)

    - by nextgenneo
    Hi, I just posted about finding bottle necks and have narrowed it down to having way too many VMs on my machine on one 15K SAS drive. I have plenty of cores and plenty of ram. So I am planning on putting 6 VMs on one drive (so 5 drives for 30 VMs). I am thinking of using a 60GB Vertex 2 SSD. Each of my VMs will only need about 6GB of HDD space so this isn't a big deal. My questions are: does ESXI support Trim and do I really need it if I leave 25% of the drive as free space? If I need it should I get a diff drive that handles garbage collection differently? I have a RAID controller w/ write caching. I will still benefit from this? Will this effect my setup differently? Is there anything I need to consider regarding SSD's in virtualized environments. Thanks for any and all help!

    Read the article

  • Certain grid lines not rendering as expected

    - by row1
    I am drawing a simple quad (a triangle strip with 4 vertices) as the floor and then drawing an 8x8 grid over top (a collection of vertex pairs for a line list). The vertical grid lines work fine (apart from being very aliased), but some of the horizontal lines do not get rendered. The grid renders fine if I do not draw the quad. foreach (EffectPass pass in _Effect.CurrentTechnique.Passes) { pass.Apply(); CurrentGraphicsDevice.SetVertexBuffer(_VertexFloorBuffer); _Engine.CurrentGraphicsDevice.DrawPrimitives(PrimitiveType.TriangleStrip, 0, 2); //Some of the horizontal lines seems to disappear if we draw the above quad. CurrentGraphicsDevice.SetVertexBuffer(_VertexGridBuffer); CurrentGraphicsDevice.DrawPrimitives(PrimitiveType.LineList, 0, _VertexGridBuffer.VertexCount / 2); } What could be causing these lines to not be rendered? Update: I added the below code after I draw my quad and grid and it started working. But I am not sure why that works as I thought this code was to draw the WPF controls elementRenderer.Render(); spriteBatch.Begin(); spriteBatch.Draw(elementRenderer.Texture, Vector2.Zero, Color.White); spriteBatch.End();

    Read the article

  • Image caching when rendering the same images on different pages

    - by HelpNeeder
    I'm told to think about caching of images that will be displayed on the page. The images will be repeated throughout the website on different pages and I'm told to figure out the best way to cache these images. There could be few to dozen of images on single page. Here's few questions: Will browser caching work to display the same images across different web pages? Should I rather store images in stringified form in a memory instead, using JavaScript arrays? Store them on hard drive using 'localStorage'? What would be easiest yet best option for this? Are there any other alternatives? How to force cache? Any other information would be greatly appreciated...

    Read the article

  • Windows 7 strange boot issue

    - by JL
    Recently I installed an SSD drive, its now my primary boot drive (OCZ Vertex Turbo 60GB). I'm running Win 7 (64bit). Now I am not sure exactly where the fault lies, but when I do a restart from within Windows, the computer will boot and enter into the loading windows portion, however won't progress beyond there. My solution is to manually hit the reset switch, and then when it boots it enters into a windows menu that offers a start up repair or start windows normally. I select start windows normally, and then it boots fine. I am not entirely sure why I can't just restart the computer from windows normally though. The SSD drive works perfectly, and not even sure if it is the cause to this problem. Any ideas on this?

    Read the article

  • Workstation Build: Single 2.66ghz i-7 with overclock potential, OR Dual 5520 2.26ghz Xeons?

    - by jdc0589
    There are probably better places to ask this, but I am used to the excellent quality of responses on stack overflow. I am rebuilding my desktop in a few months. Aside from normal lightweight internet usage, I use it to run sqlServer, mySql, 1-2 Ubuntu VMs from time to time, lots of IDE's, and a media server for my PS3. The two possible setups cost the exact same amount (within $50) and would both have 12gb 1333mhz ddr3 ram and a 500gb RAID-0 array (250x2). Now, If I go with a single i-7 920 2.66ghz quadcore, I can easily overclock it to 3ghz, and would have cash leftover to get a 160gb ssd (either the ocz vertex or the 120gb intel) for the main OS/Program install drive. Else, I could get a dual lga1366 motherboard with two e5520 Xeon's (2.26ghz),just use the disks I already have. So, do I go for 8 physical/16 virtual cores at 2.26ghz (No overclocking on server boards) with normal disk I/O, or a 4 physical/8 virtual cores at 3.0ghz with really outstanding disk I/O?

    Read the article

  • Collision Detection within Player/Enemy Class

    - by user1264811
    I'm making a 2D platform game. Right now I'm just working on making a very generic Player class. I'm wondering if it would be more efficient/better practice to have an ActionListener within the Player class to detect collisions with Enemy objects (also have an ActionListener) or to handle all the collisions in the main world. Furthermore, I'm thinking ahead about how I will handle collisions with the platforms themselves. I've looked into the double boolean arrays to see which tiles players can go to and which they can't. I don't understand how to use this class and the player class at the same time. Thank you.

    Read the article

  • Accepting a numerical range in a function call

    - by dekpos
    I have encountered two ways of doing it: void foo(int from, int to); /* 'from' inclusive, 'to' exclusive */ void foo(int startIndex, int rangelength); Has one style historically been preferred over the other? If so, was it just a matter of convention or was it due to some deeper underlying reason? I'm currently programming in Java and noticed that the Arrays class uses the former style. The exclusivity of the to argument felt somewhat unintuitive to me, which led me to ask this question.

    Read the article

  • How to find a programming mentor?

    - by Dvole
    I decided to learn programming. I've been reading SO for few days, and I think I will start with C++, as I read some articles. I am aware of loops, arrays, program logic and objects a little and I need someone to look me over and help me with small questions I get when doing my first projects. So here is the question - where do I find such guy? I don't got any friends who program and all. EDIT: 2 years later, I am still looking for mentor. I did not actively code just started 3 months again. I work on Objective-C and iOS programming and game programming with Cocos2d. If you want to become my mentor, drop me a or comment.

    Read the article

  • 3D Box Collision Data Import

    - by cboe
    I'm trying to implement a collision system using oriented bounding boxes, using a center for the box, it's extents as a 3D Vector and a rotation matrix, which is all stuff I picked up online and seem to be somewhat the standard. Detecting the center is no problem so I'm gonna leave these out here. My problem however is importing the data from a 3D file. Say I've placed a box with 2 units length on each side aligned to the world axis. The logic results here are extents of 1,1,1 and I use an identity matrix for rotation - easy. However I'm stuck when I rotate the box in the 3D program, say 30 degrees each axis. How would I parse the box? I only have these 8 vertices as information, and I guess what I would need to do is to find out the rotation of said box, apply it to the vertices so they are aligned to world axes and then calculate the extents out of that. How do I get the rotation of the box when I only have the vertex information of the box available?

    Read the article

  • How to setup my texture cordinates correctly in GLSL 150 and OpenGL 3.3?

    - by RubyKing
    I'm trying to do texture mapping in GLSL 150 and OpenGL 3.3 Here are my shaders I've tried my best to get this correct as possible hopefully this is :) I'm guessing you want to know what the problem is well my texture shows but not in its fullest form just one section of it not the full texture on the quad. All I can think of is its the texture cordinates in the main.cpp which is at the bottom of this post. FRAGMENT SHADER #version 150 in vec2 Texcoord_VSPS; out vec4 color; // Values that stay constant for the whole mesh. uniform sampler2D myTextureSampler; //Main Entry Point void main() { // Output color = color of the texture at the specified UV color = texture2D( myTextureSampler, Texcoord_VSPS ); } VERTEX SHADER #version 150 //Position Container in vec3 position; //Container for TexCoords attribute vec2 Texcoord0; out vec2 Texcoord_VSPS; //out vec2 ex_texcoord; //TO USE A DIFFERENT COORDINATE SYSTEM JUST MULTIPLY THE MATRIX YOU WANT //Main Entry Point void main() { //Translations and w Cordinates stuff gl_Position = vec4(position.xyz, 1.0); Texcoord_VSPS = Texcoord0; } LINK TO MAIN.CPP http://pastebin.com/t7Vg9L0k

    Read the article

  • Windows 7 System Image Restore to SSD - SSD not detected?

    - by steviey
    I recently bought a new SSD (OCZ Vertex 2 120GB) as a replacement for my laptop HDD . I created a System Image on an external drive using the Win 7 backup and restore tool and then restored this image to the SSD using the Win 7 disk. AHCI is enabled in Win 7 and the BIOS, but it seems that windows is not detecting the disk as an SSD because, in the defragger, the disk is still available for defragging. Prefetch and Superfetch were also still enabled. I have manually disabled scheduled defragging, prefetch and superfetch. I have also checked that TRIM is enabled using: fsutil behavior query DisableDeleteNotify and the result is '0' (it is). Performance seems ok, but not quite as fast as I expected. Was restoring from a win7 generated system image a mistake? Am I getting optimal SSD performance?

    Read the article

  • What's wrong with this Open GL ES 2.0. Shader?

    - by Project Dumbo Dev
    I just can't understand this. The code works perfectly on the emulator(Which is supposed to give more problems than phones…), but when I try it on a LG-E610 it doesn't compile the vertex shader. This is my log error(Which contains the shader code as well): EDITED Shader: uniform mat4 u_Matrix; uniform int u_XSpritePos; uniform int u_YSpritePos; uniform float u_XDisplacement; uniform float u_YDisplacement; attribute vec4 a_Position; attribute vec2 a_TextureCoordinates; varying vec2 v_TextureCoordinates; void main(){ v_TextureCoordinates.x= (a_TextureCoordinates.x + u_XSpritePos) * u_XDisplacement; v_TextureCoordinates.y= (a_TextureCoordinates.y + u_YSpritePos) * u_YDisplacement; gl_Position = u_Matrix * a_Position; } Log reports this before loading/compiling shader: 11-05 18:46:25.579: D/memalloc(1649): /dev/pmem: Mapped buffer base:0x51984000 size:5570560 offset:4956160 fd:46 11-05 18:46:25.629: D/memalloc(1649): /dev/pmem: Mapped buffer base:0x5218d000 size:5836800 offset:5570560 fd:49 Maybe it has something to do with that men alloc? The phone is also giving a constant error while plugged: ERROR FBIOGET_ESDCHECKLOOP fail, from msm7627a.gralloc Edited: "InfoLog:" refers to glGetShaderInfoLog, and it's returning nothing. Since I removed the log in a previous edit I will just say i'm looking for feedback on compiling shaders. Solution + More questions: Ok, the problem seems to be that either ints are not working(generally speaking) or that you can't mix floats with ints. That brings to me the question, why on earth glGetShaderInfoLog is returning nothing? Shouldn't it tell me something is wrong on those lines? It surely does when I misspell something. I solved by turning everything into floats, but If someone can add some light into this, It would be appreciated. Thanks.

    Read the article

  • Alternative ways to construct maps

    - by sideways8
    I've searched around and it seems like most people are using tile-based map systems. I suppose this question is more theoretical than practical (I am not very concerned about memory or performance speed), but I want to know: what other ways can a map be created in a game? A map being a graphic representation of terrain that can be navigated, has entrances and exits, and boundares (no-go zones). Besides using text files to store and arrays to load tile data, one idea I had was to store a map entirely as a graphic file and use queries on the pixel colour to determine boundaries (ie, you can only move in a certain direction if the way is bright enough in that direction). What other creative map systems are out there?

    Read the article

  • HighPoint RAID Controller can't see drives

    - by Satellite
    I've just built a system with a HighPoint 2720 RAID controller. Everything appears to be OK, except that the controller doesn't see any of my drives - the RAID BIOS displays "ERROR. No Suitable disks". I have tried a WD SATA, Seagate SATA, and OCZ Vertex 3 SATA. I am using MiniSAS to 4x SATA breakout cables. How do I get this working? I've tried to sign up for HighPoint support, but their support site doesn't appear to be functioning correctly.

    Read the article

  • Output the total number of String Characters [migrated]

    - by Programmerwannabe
    My Question is what method should I use if I wanted to get the total number of characters a user inputs? without using arrays, i tried using .length() but it did not return all characters say from the first and lastname, it only returned the first name. Here's an example of my code. (Please dont laugh im really new in programming :) ) System.out.print("Enter your first and last name: "); String yourName = keyboard.next(); System.out.println("Your name has a total of " + yourName.length() + " numbers"); what happened was if i enter say "Neo Matrix" it would only return 3. I appreciate any help. thank you!

    Read the article

  • spliiting code in java-don't know what's wrong [closed]

    - by ???? ?????
    I'm writing a code to split a file into many files with a size specified in the code, and then it will join these parts later. The problem is with the joining code, it doesn't work and I can't figure what is wrong! This is my code: import java.io.*; import java.util.*; public class StupidSplit { static final int Chunk_Size = 10; static int size =0; public static void main(String[] args) throws IOException { String file = "b.txt"; int chunks = DivideFile(file); System.out.print((new File(file)).delete()); System.out.print(JoinFile(file, chunks)); } static boolean JoinFile(String fname, int nChunks) { /* * Joins the chunks together. Chunks have been divided using DivideFile * function so the last part of filename will ".partxxxx" Checks if all * parts are together by matching number of chunks found against * "nChunks", then joins the file otherwise throws an error. */ boolean successful = false; File currentDirectory = new File(System.getProperty("user.dir")); // File[] fileList = currentDirectory.listFiles(); /* populate only the files having extension like "partxxxx" */ List<File> lst = new ArrayList<File>(); // Arrays.sort(fileList); for (File file : fileList) { if (file.isFile()) { String fnm = file.getName(); int lastDot = fnm.lastIndexOf('.'); // add to list which match the name given by "fname" and have //"partxxxx" as extension" if (fnm.substring(0, lastDot).equalsIgnoreCase(fname) && (fnm.substring(lastDot + 1)).substring(0, 4).equals("part")) { lst.add(file); } } } /* * sort the list - it will be sorted by extension only because we have * ensured that list only contains those files that have "fname" and * "part" */ File[] files = (File[]) lst.toArray(new File[0]); Arrays.sort(files); System.out.println("size ="+files.length); System.out.println("hello"); /* Ensure that number of chunks match the length of array */ if (files.length == nChunks-1) { File ofile = new File(fname); FileOutputStream fos; FileInputStream fis; byte[] fileBytes; int bytesRead = 0; try { fos = new FileOutputStream(ofile,true); for (File file : files) { fis = new FileInputStream(file); fileBytes = new byte[(int) file.length()]; bytesRead = fis.read(fileBytes, 0, (int) file.length()); assert(bytesRead == fileBytes.length); assert(bytesRead == (int) file.length()); fos.write(fileBytes); fos.flush(); fileBytes = null; fis.close(); fis = null; } fos.close(); fos = null; } catch (FileNotFoundException fnfe) { System.out.println("Could not find file"); successful = false; return successful; } catch (IOException ioe) { System.out.println("Cannot write to disk"); successful = false; return successful; } /* ensure size of file matches the size given by server */ successful = (ofile.length() == StupidSplit.size) ? true : false; } else { successful = false; } return successful; } static int DivideFile(String fname) { File ifile = new File(fname); FileInputStream fis; String newName; FileOutputStream chunk; //int fileSize = (int) ifile.length(); double fileSize = (double) ifile.length(); //int nChunks = 0, read = 0, readLength = Chunk_Size; int nChunks = 0, read = 0, readLength = Chunk_Size; byte[] byteChunk; try { fis = new FileInputStream(ifile); StupidSplit.size = (int)ifile.length(); while (fileSize > 0) { if (fileSize <= Chunk_Size) { readLength = (int) fileSize; } byteChunk = new byte[readLength]; read = fis.read(byteChunk, 0, readLength); fileSize -= read; assert(read==byteChunk.length); nChunks++; //newName = fname + ".part" + Integer.toString(nChunks - 1); newName = String.format("%s.part%09d", fname, nChunks - 1); chunk = new FileOutputStream(new File(newName)); chunk.write(byteChunk); chunk.flush(); chunk.close(); byteChunk = null; chunk = null; } fis.close(); System.out.println(nChunks); // fis = null; } catch (FileNotFoundException fnfe) { System.out.println("Could not find the given file"); System.exit(-1); } catch (IOException ioe) { System.out .println("Error while creating file chunks. Exiting program"); System.exit(-1); }System.out.println(nChunks); return nChunks; } } }

    Read the article

  • Should my game handle collisions in the Player object?

    - by user1264811
    I'm making a 2D platform game. Right now I'm just working on making a very generic Player class. I'm wondering if it would be more efficient/better practice to have an ActionListener within the Player class to detect collisions with Enemy objects (also have an ActionListener) or to handle all the collisions in the main world. Furthermore, I'm thinking ahead about how I will handle collisions with the platforms themselves. I've looked into the double boolean arrays to see which tiles players can go to and which they can't. I don't understand how to use this class and the player class at the same time.

    Read the article

  • Array of pointers in C++.

    - by Theorem
    I am not understanding the output of this , #include <iostream> using namespace std; // pointers and arrays char ch1 = 'a' , ch2= 'b'; char ch3[6] = {'c', 'd', 'e', 'f', 'g' , 'h'}; char *ptr[3]; int main () { ptr[0] = &ch1 ; ptr[2] = ch3; cout << &ch1 << endl; } The out put is abcdefgh . isn't &ch1 supposed to give the address of ch1 ? I cannot make sense why the output should be abcdefgh.

    Read the article

  • Weird order when painting triangle outlines using GL_LINE_STRIP

    - by RayDeeA
    I'm developing an app for iOS-Plaftorms using OpenGL. Currently I'm having a weird issue when painting a plane (terrain) which consists of multiple subplanes, where each subplane consists of 2 triangles forming a rect. I'm painting this terrain as a wireframe by using a call to glDrawElements and provide the parameters GL_Line_Strip and the precalculated indices. The problem is that the triangles get painted in the wrong order or are rather vertically mirrored. They do not get painted in the order how I specified the indices, which is confusing. This is the simplified code to generate the vertices: for(NSInteger y = - gridSegmentsY / 2; y < gridSegmentsY / 2; y ++) { for(NSInteger x = - gridSegmentsX / 2; x < gridSegmentsX / 2; x ++) { vertices[pos++] = x * 5; vertices[pos++] = y * 5; vertices[pos++] = 0; } } This is how I generate the indices including degenerated ones (To use as IBO). pos = 0; for(int y = 0; y < gridSegmentsY - 1; y ++) { if (y > 0) { // Degenerate begin: repeat first vertex indices[pos++] = (unsigned short)(y * gridSegmentsY); } for(int x = 0; x < gridSegmentsX; x++) { // One part of the strip indices[pos++] = (unsigned short)((y * gridSegmentsY) + x); indices[pos++] = (unsigned short)(((y + 1) * gridSegmentsY) + x); } if (y < gridSegmentsY - 2) { // Degenerate end: repeat last vertex indices[pos++] = (unsigned short)(((y + 1) * gridSegmentsY) + (gridSegmentsX - 1)); } } So in this part... indices[pos++] = (unsigned short)((y * gridSegmentsY) + x); indices[pos++] = (unsigned short)(((y + 1) * gridSegmentsY) + x); ...I'm setting the first index in the indices array to point to the current (x,y) and the next index to (x,y+1). I'm doin' this for all x's in the current strip, then I'm handling degenerated triangles and repeat this procedure for the next strip (y+1). This method is taken from http://www.learnopengles.com/android-lesson-eight-an-introduction-to-index-buffer-objects-ibos/ So I expect the resulting mesh to get painted like: a----b----c | /| /| | / | / | | / | / | |/ |/ | d----e----f | /| /| | / | / | | / | / | |/ |/ | g----h----i by painting it as described using: glDrawElements(GL_LINE_STRIP, indexCount, GL_UNSIGNED_SHORT, 0); ...since I expect GL_Line_Strip to paint first a line from (a-d), then from (d-b), then (b, e)... and so on (as specified in the indices calculation) But what actually gets painted is: *----*----* |\ |\ | | \ | \ | | \ | \ | | \| \| *----*----* |\ |\ | | \ | \ | | \ | \ | | \| \| *----*----* So the triangles are somehow painted in the wrong order and I need to know why? ;). Does somebody know? Does the problem lie in using GL_Line_Strip or is there a bug in my code? My eye is at (0.0f, 0.0f, 20.0f) and looks at (0,0,0). The mesh is painted along the x-axis & y-axis from left to right with z = 0, so the mesh should not be flipped or anything.

    Read the article

  • One letter game problem?

    - by Alex K
    Recently at a job interview I was given the following problem: Write a script capable of running on the command line as python It should take in two words on the command line (or optionally if you'd prefer it can query the user to supply the two words via the console). Given those two words: a. Ensure they are of equal length b. Ensure they are both words present in the dictionary of valid words in the English language that you downloaded. If so compute whether you can reach the second word from the first by a series of steps as follows a. You can change one letter at a time b. Each time you change a letter the resulting word must also exist in the dictionary c. You cannot add or remove letters If the two words are reachable, the script should print out the path which leads as a single, shortest path from one word to the other. You can /usr/share/dict/words for your dictionary of words. My solution consisted of using breadth first search to find a shortest path between two words. But apparently that wasn't good enough to get the job :( Would you guys know what I could have done wrong? Thank you so much. import collections import functools import re def time_func(func): import time def wrapper(*args, **kwargs): start = time.time() res = func(*args, **kwargs) timed = time.time() - start setattr(wrapper, 'time_taken', timed) return res functools.update_wrapper(wrapper, func) return wrapper class OneLetterGame: def __init__(self, dict_path): self.dict_path = dict_path self.words = set() def run(self, start_word, end_word): '''Runs the one letter game with the given start and end words. ''' assert len(start_word) == len(end_word), \ 'Start word and end word must of the same length.' self.read_dict(len(start_word)) path = self.shortest_path(start_word, end_word) if not path: print 'There is no path between %s and %s (took %.2f sec.)' % ( start_word, end_word, find_shortest_path.time_taken) else: print 'The shortest path (found in %.2f sec.) is:\n=> %s' % ( self.shortest_path.time_taken, ' -- '.join(path)) def _bfs(self, start): '''Implementation of breadth first search as a generator. The portion of the graph to explore is given on demand using get_neighboors. Care was taken so that a vertex / node is explored only once. ''' queue = collections.deque([(None, start)]) inqueue = set([start]) while queue: parent, node = queue.popleft() yield parent, node new = set(self.get_neighbours(node)) - inqueue inqueue = inqueue | new queue.extend([(node, child) for child in new]) @time_func def shortest_path(self, start, end): '''Returns the shortest path from start to end using bfs. ''' assert start in self.words, 'Start word not in dictionnary.' assert end in self.words, 'End word not in dictionnary.' paths = {None: []} for parent, child in self._bfs(start): paths[child] = paths[parent] + [child] if child == end: return paths[child] return None def get_neighbours(self, word): '''Gets every word one letter away from the a given word. We do not keep these words in memory because bfs accesses a given vertex only once. ''' neighbours = [] p_word = ['^' + word[0:i] + '\w' + word[i+1:] + '$' for i, w in enumerate(word)] p_word = '|'.join(p_word) for w in self.words: if w != word and re.match(p_word, w, re.I|re.U): neighbours += [w] return neighbours def read_dict(self, size): '''Loads every word of a specific size from the dictionnary into memory. ''' for l in open(self.dict_path): l = l.decode('latin-1').strip().lower() if len(l) == size: self.words.add(l) if __name__ == '__main__': import sys if len(sys.argv) not in [3, 4]: print 'Usage: python one_letter_game.py start_word end_word' else: g = OneLetterGame(dict_path = '/usr/share/dict/words') try: g.run(*sys.argv[1:]) except AssertionError, e: print e

    Read the article

  • Plot numpy datetime64 with matplotlib

    - by enedene
    I have two numpy arrays 1D, one is time of measurement in datetime64 format, for example: array([2011-11-15 01:08:11, 2011-11-16 02:08:04, ..., 2012-07-07 11:08:00], dtype=datetime64[us]) and other array of same length and dimension with integer data. I'd like to make a plot in matplotlib time vs data. If I put the data directly, this is what I get: plot(timeSeries, data) Is there a way to get time in more natural units? For example in this case months/year would be fine.

    Read the article

  • Javascript Uncaught Error: INDEX_SIZE_ERR: DOM Exception 1

    - by Travis
    The site is: http://www.clubloc.com/ And it works in firefox but not in google chrome. Internet explorer also has problems but thats pretty much a given when using HTML5 Canvas. Anyways I'm trying to figure out why it throws the error: Uncaught Error: INDEX_SIZE_ERR: DOM Exception 1 When the arrays clearly have all those elements, I even logged their size and it says 100. Any help/guidance would be greatly appreciated.

    Read the article

< Previous Page | 114 115 116 117 118 119 120 121 122 123 124 125  | Next Page >