Search Results

Search found 34826 results on 1394 pages for 'valid html'.

Page 1189/1394 | < Previous Page | 1185 1186 1187 1188 1189 1190 1191 1192 1193 1194 1195 1196  | Next Page >

• Apache SSO through Kerberos using Machine Account

  - by watkipet

  I'm attempting to get Apache on Ubuntu 12.04 to authenticate users via Kerberos SSO to a Windows 2008 Active Directory server. Here are a few things that make my situation different: I don't have administrative access to the Windows Server (nor will I ever have access). I also cannot have any changes to the server made on my behalf. I've joined Ubuntu server to the Active Directory using PBIS open. Users can log into the Ubuntu server using their AD credentials. kinit also works fine for each user. Since I can't change AD (except for adding new machines and SPNs), I cannot add a service account for Apache on Ubuntu. Since I can't add I service account, I have to use the machine keytab (/etc/krb5.keytab), or at least use the machine password in another keytab. Right now I'm using the machine keytab and giving Apache readonly access (bad idea, I know). I've already added the SPN using net ads keytab add HTTP -U Since I'm using Ubuntu 12.04, the only encoding types that get added during "net ads keytab add" are arcfour-hmac, des-cbc-crc, and des-cbc-md5. PBIS adds the AES encoding types to the host and cifs principals when it joins the domain, but I have yet to get "net ads keytab add" to do this. ktpass and setspn are out of the question because of #1 above. I've configured (for Kerberos SSO) and tested both IE 8 Firefox. I'm using the following configuration in my Apache site config: <Location /secured> AuthType Kerberos AuthName "Kerberos Login" KrbMethodNegotiate On KrbMethodK5Passwd On KrbAuthRealms DOMAIN.COM Krb5KeyTab /etc/krb5.keytab KrbLocalUserMapping On require valid-user </Location> When Firefox tries to connect get the following in Apache's error.log (LogLevel debug): [Wed Oct 23 13:48:31 2013] [debug] src/mod_auth_kerb.c(1628): [client 192.168.0.2] kerb_authenticate_user entered with user (NULL) and auth_type Kerberos [Wed Oct 23 13:48:31 2013] [debug] mod_deflate.c(615): [client 192.168.0.2] Zlib: Compressed 477 to 322 : URL /secured [Wed Oct 23 13:48:37 2013] [debug] src/mod_auth_kerb.c(1628): [client 192.168.0.2] kerb_authenticate_user entered with user (NULL) and auth_type Kerberos [Wed Oct 23 13:48:37 2013] [debug] src/mod_auth_kerb.c(994): [client 192.168.0.2] Using HTTP/[email protected] as server principal for password verification [Wed Oct 23 13:48:37 2013] [debug] src/mod_auth_kerb.c(698): [client 192.168.0.2] Trying to get TGT for user [email protected] [Wed Oct 23 13:48:37 2013] [debug] src/mod_auth_kerb.c(609): [client 192.168.0.2] Trying to verify authenticity of KDC using principal HTTP/[email protected] [Wed Oct 23 13:48:37 2013] [debug] src/mod_auth_kerb.c(652): [client 192.168.0.2] krb5_rd_req() failed when verifying KDC [Wed Oct 23 13:48:37 2013] [error] [client 192.168.0.2] failed to verify krb5 credentials: Decrypt integrity check failed [Wed Oct 23 13:48:37 2013] [debug] src/mod_auth_kerb.c(1073): [client 192.168.0.2] kerb_authenticate_user_krb5pwd ret=401 user=(NULL) authtype=(NULL) [Wed Oct 23 13:48:37 2013] [debug] mod_deflate.c(615): [client 192.168.0.2] Zlib: Compressed 477 to 322 : URL /secured When IE 8 tries to connect I get: [Wed Oct 23 14:03:30 2013] [debug] src/mod_auth_kerb.c(1628): [client 192.168.0.2] kerb_authenticate_user entered with user (NULL) and auth_type Kerberos [Wed Oct 23 14:03:30 2013] [debug] mod_deflate.c(615): [client 192.168.0.2] Zlib: Compressed 477 to 322 : URL /secured [Wed Oct 23 14:03:30 2013] [debug] src/mod_auth_kerb.c(1628): [client 192.168.0.2] kerb_authenticate_user entered with user (NULL) and auth_type Kerberos [Wed Oct 23 14:03:30 2013] [debug] src/mod_auth_kerb.c(1240): [client 192.168.0.2] Acquiring creds for HTTP@apache_server [Wed Oct 23 14:03:30 2013] [debug] src/mod_auth_kerb.c(1385): [client 192.168.0.2] Verifying client data using KRB5 GSS-API [Wed Oct 23 14:03:30 2013] [debug] src/mod_auth_kerb.c(1401): [client 192.168.0.2] Client didn't delegate us their credential [Wed Oct 23 14:03:30 2013] [debug] src/mod_auth_kerb.c(1420): [client 192.168.0.2] GSS-API token of length 9 bytes will be sent back [Wed Oct 23 14:03:30 2013] [debug] src/mod_auth_kerb.c(1101): [client 192.168.0.2] GSS-API major_status:000d0000, minor_status:000186a5 [Wed Oct 23 14:03:30 2013] [error] [client 192.168.0.2] gss_accept_sec_context() failed: Unspecified GSS failure. Minor code may provide more information (, ) [Wed Oct 23 14:03:30 2013] [debug] mod_deflate.c(615): [client 192.168.0.2] Zlib: Compressed 477 to 322 : URL /secured Let me know if you'd like additional log and config files--the initial question is getting long enough.

  Read the article

• AWS Cloud Formation.Requires capabilities : [CAPABILITY_IAM] (Child Stack)

  - by Drew Khoury

  I'm running a CloudFormation template in the AWS Console. Running Stack Directly I started with a template that used IAM resources, and the console prompts me to acknowledge IAM capabilities when running the stack directly. Running Stack as a child I then tried to call the same stack from a parent stack and did not receive the same prompt. The stack then failed with the message: Requires capabilities : [CAPABILITY_IAM] Research The docs indicate that I can run CF scripts in a number of ways. There's plenty of docs around CLI/API and supplying the capability parameter, but there appears to be no information about how to make sure it's applied when running through the console. http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/using-iam-template.html IAM Resources in AWS CloudFormation Templates CF Console CLI API What I've done / What I think I've raised an issue via the forum for now, but no response (yet): https://forums.aws.amazon.com/thread.jspa?threadID=139160 I suspect this is a bug in the Console, as there doesn't appear to be any documentation of how to change the behaviour via the console and as far as I'm aware this should just work. Anyone came across the same problem, or can report that it's working fine for them?

  Read the article

• How to solve "Warning: mail() [function.mail]: SMTP server response: 530 Relaying not allowed - sender domain not local in D:\\... " Error?

  - by Kiran Rs

  I have a contact page where users can contact me via that form. But I'm getting this error, Warning: mail() [function.mail]: SMTP server response: 530 Relaying not allowed - sender domain not local in D:\INETPUB\VHOSTS\nextoption.in\httpdocs\auto-replay\contact.php on line 33 My Php code is, if(isset($_POST['send'])) //if "email" is filled out, send email { //send email $email1=$_POST['email']; $headers = "From: My site\r\n"; $headers .= "Reply-To: [email protected]\r\n"; $headers .= "Return-Path: [email protected]\r\n"; $headers .= "X-Mailer: Drupal\n"; $headers .= 'MIME-Version: 1.0' . "\n"; $headers .= 'Content-type: text/html; charset=iso-8859-1' . "\r\n"; $to = "[email protected]"; $subject = "Test mail"; $message = "Hello!This is a simple email message $from = $email1; mail($to,$subject,$message,$headers); ? alert ("Enquiry form submited successfully ! We'll get back you soon "); What will be my fault..... What is the Fault in SMTP Server?

  Read the article

• Plesk Postfix SMTP 550 5.7.1 "Command rejected" for one external sender

  - by Mnebuerquo

  My server is rejecting emails from one external sender. I suspect this might be misconfiguration on the sending server, but I'm not sure from these error messages. The non-delivery report message the sender gets contains this text: #5.7.1 smtp;550 5.7.1 Command rejected> #SMTP# I also see this message in /var/messages at about the same time as the rejection message was sent, though I'm not sure if it's actually related: Nov 29 12:29:28 localhost postfix/smtpd[31829]: sql_sqlite3 plugin: no result found I'm using Plesk 10.4.4 Update #47, Centos 6.2, Postfix 2.8.4-11100615 on my mail server. This is only happening for one sender so far, but I found a Google result on experts-exchange.com which seemed to identify the same problem and with the same sending domain. This was posted back in June, and currently has no answers, so even if I was a paying customer it wouldn't be answered. (http://www.experts-exchange.com/Software/Server_Software/Email_Servers/Q_27760746.html) The generating server is bigfish.com. What I need to determine is if this is a problem on my server or a problem with bigfish.com. Is there more information I can find in config files, logs, etc. to figure this out?

  Read the article

• Mounting an Azure blob container in a Linux VM Role

  - by djechelon

  I previously asked a question about this topic but now I prefer to rewrite it from scratch because I was very confused back then. I currently have a Linux XS VM Role in Azure. I basically want to create a self-managed and evoluted hosting service using VMs rather than Azure's more-expensive Web Roles. I also want to take advantage of load balancing (between VM Roles) and geo-replication (of Storage Roles), making sure that the "web files" of customers are located in a defined and manageable place. One way I found to "mount" a drive in Linux VM is described here and involves mounting a VHD onto the virtual machine. From what I could learn, the VHD is reliably-stored in a storage role, and is exclusively locked by the VM that uses it. Once the VM Role has its drive I can format the partition to any size I want. I don't want that!! I would like each hosted site to have its own blob directory, then each replicated/load-balanced VM Role to rw mount like in NFS that blob directory to read HTML and script files. The database is obviously courtesy of Microsoft :) My question is Is it possible to actually mount a blob storage into a directory in the Linux FS? Is it possible in Windows Server 2008?

  Read the article

• Mod Rewrite Help - Pseudo-Subdirectories

  - by Gimpyfuzznut

  I am dealing with a frustrating problem with Joomla that is going to require some url trickery. The idea is straight-forward but after reading a bunch of guides for mod-rewrite, I still can't seem to get it work. Let's say my site is www.mysite.com. Joomla is already performing some rewriting for SEF urls so I have links like www.mysite.com/home and www.mysite.com/news and so on. I want to be able to have (4) pseudo-subdirectories like www.mysite.com/mode1/ and www.mysite.com/mode2/ and so on. These subdirectories should work as if the subdirectory isn't there, ie both www.mysite.com/mode1/home and www.mysite.com/mode2/home should pull up the same www.mysite.com/home. It should point any www.mysite.com/mode1/anypagehere to www.mysite.com/anypagehere. The reason I am asking for this is because I will be reading the url for mode1, mode2, etc, to modify the template page. There will be a landing page that will direct people to /mode1/ and /mode2/ etc and the template will change based on that. Note, that I don't want to actually pass a parameter to the url accessible by a GET or whatever because Joomla removes it (perhaps because of my current mod_rewrite settings). I've pasted the current .htaccess file. RewriteBase /joomla ##########Rewrite rules to block out some common exploits RewriteCond %{QUERY_STRING} mosConfig_[a-zA-Z_]{1,21}(=|\%3D) [OR] # Block out any script trying to base64_encode crap to send via URL RewriteCond %{QUERY_STRING} base64_encode.*\(.*\) [OR] # Block out any script that includes a <script> tag in URL RewriteCond %{QUERY_STRING} (\<|%3C).*script.*(\>|%3E) [NC,OR] # Block out any script trying to set a PHP GLOBALS variable via URL RewriteCond %{QUERY_STRING} GLOBALS(=|\[|\%[0-9A-Z]{0,2}) [OR] # Block out any script trying to modify a _REQUEST variable via URL RewriteCond %{QUERY_STRING} _REQUEST(=|\[|\%[0-9A-Z]{0,2}) # Send all blocked request to homepage with 403 Forbidden error! RewriteRule ^(.*)$ index.php [F,L] ########## Begin - Joomla! core SEF Section RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteCond %{REQUEST_URI} !^/index.php RewriteCond %{REQUEST_URI} (/|\.php|\.html|\.htm|\.feed|\.pdf|\.raw|/[^.]*)$ [NC] RewriteRule (.*) index.php #RewriteRule .* - [E=HTTP_AUTHORIZATION:%{HTTP:Authorization},L] ########## End - Joomla! core SEF Section

  Read the article

• VLC (Server) re-stream Security Camera Feed

  - by Aaron

  I purchased a Swann Home Security DVR system and was hoping for some help on how to duplicate the streaming video on my server. In order to get their web view (streaming video in the browser) to work, I had to install the following plugins: HiDvrPlugin.dmg for mac. Hidvrocx.cab for Windows. I was originally thinking it was a sign of some form of DRM? Maybe. Maybe not. HTML wise, the following code is in the source of the safari version of the web view: <embed pluginspage="SurveilClient.dmg" width="10px" height="10px" type="application/x-scplugin" id="MacDiv" style="height: 592px; width: 720px; left: 278px; top: 61px; "> It seems to be the main display area. Using wireshark, I am able to see that the video stream is on port 9000. However, I have no idea what type of stream it is. I've tried opening it in VLC with no such luck. http://dvr_ip:9000 tcp://dvr_ip:9000 My hope was to do the following to redistribute the feed vlc dvr_ip:9000 --sout h264-version-on-localhost:3000 TLDR; Trying to re-distribute a stream from a security camera (can't tell the format) using vlc (re-distribute via h.264 / HTML5). Not sure how to accomplish this. Is it possible that the software has some type of DRM that only the plugins can decode?

  Read the article

• Fetching e-mails into Redmine via IMAP

  - by Danilo Bargen

  I'm trying to fetch e-mails into Redmine via IMAP. The e-mails I'm generating look like this: FooBar Ltd 123456 http://example.com/Foobar-Ltd-123456.html Project: backend Tracker: Dataerror Beschreibung: This is the description =========================== CLIENT_IP: 192.168.1.215 HTTP_USER_AGENT: mozilla/asdfjköl I try to fetch them into Redmine via this command: rake -f /var/www/projects/redmine/Rakefile redmine:email:receive_imap \ RAILS_ENV="production" host=example.com port=993 ssl=true username=redmine \ password=1234 project=myproject tracker=other \ allow_override=project,tracker,category,priority \ move_on_success=read move_on_failure=failed But the e-mails get moved into the failed folder. I had this setup running some time ago with a different e-mail generator but pretty much the same template, and I can't figure out why it's not working. The permissions seem to be OK too. In order to further debug this issue, I need some logfiles. Are there any logfiles written by this command? Or are there any other suggestions to solve this issue? My environment: danilo@jabba:/var/www/projects/redmine$ RAILS_ENV=production script/about About your application's environment Ruby version 1.8.7 (i486-linux) RubyGems version 1.3.5 Rack version 1.0 Rails version 2.3.5 Active Record version 2.3.5 Active Resource version 2.3.5 Action Mailer version 2.3.5 Active Support version 2.3.5 Application root /var/www/projects/redmine Environment production Database adapter mysql Database schema version 20100819172912

  Read the article

• How do you import CA certificates onto an Android phone?

  - by f50driver

  Hi all, I want to connect to my University's wireless using my Nexus One. When I go to "Add Wi-Fi network" in Wireless Settings I fill in the Network SSID and select 802.1x Enterprise for the security and fill everything out. The problem is that our university's wireless uses Thawte Premium Server CA certificate for certification. When I click the drop down list for CA certificate I get nothing in the list (just N/A) Now I have the certificate (Thawte Premium Server CA.pem) and have moved it to my SD card, but it doesn't look like Android automatically detects it. Where should I put the certificate so that the Android wireless manager recognizes it. In other words, how can I import a CA certificate so that Android recognizes that it is on the phone and displays it in the CA Certificate drop down list. Thanks for any help, Tomek P.S. My phone is not rooted EDIT: After doing some research it looks like you are able to install certificates by going to your phone's settings Location & Security Install from SD card Unfortunately it looks like the only accepted file extension is .p12. It does not look like there is a way to import .cer or .pem files (which are the only two files that come with the Thawte certificates) at this moment. It does look like you can use a converter to convert your .cer or .pem files to .p12, however a key file is needed. https://www.sslshopper.com/ssl-converter.html I do not know where to get this key file for the Thawte certificates.

  Read the article

• HP SmartArray P400: How to repair failed logical drive?

  - by TegtmeierDE

  I have a HP Server with SmartArray P400 controller (incl. 256 MB Cache/Battery Backup) with a logicaldrive with replaced failed physicaldrive that does not rebuild. This is how it looked when I detected the error: ~# /usr/sbin/hpacucli ctrl slot=0 show config Smart Array P400 in Slot 0 (Embedded) (sn: XXXX) array A (SATA, Unused Space: 0 MB) logicaldrive 1 (698.6 GB, RAID 1, OK) physicaldrive 1I:1:1 (port 1I:box 1:bay 1, SATA, 750 GB, OK) physicaldrive 1I:1:2 (port 1I:box 1:bay 2, SATA, 750 GB, OK) array B (SATA, Unused Space: 0 MB) logicaldrive 2 (2.7 TB, RAID 5, Failed) physicaldrive 1I:1:3 (port 1I:box 1:bay 3, SATA, 750 GB, OK) physicaldrive 1I:1:4 (port 1I:box 1:bay 4, SATA, 750 GB, OK) physicaldrive 2I:1:5 (port 2I:box 1:bay 5, SATA, 750 GB, OK) physicaldrive 2I:1:6 (port 2I:box 1:bay 6, SATA, 750 GB, Failed) physicaldrive 2I:1:7 (port 2I:box 1:bay 7, SATA, 750 GB, OK) unassigned physicaldrive 2I:1:8 (port 2I:box 1:bay 8, SATA, 750 GB, OK) ~# I thought that I had drive 2I:1:8 configured as a spare for Array A and Array B, but it seems this was not the case :-(. I noticed the problem due to I/O errors on the host, even if only 1 physicaldrive of the RAID5 is failed. Does someone know why this could happen? The logicaldrive should go into "Degraded" mode but still be fully accessible from the host os!? I first tried to add the unassigned drive 2I:1:8 as a spare to logicaldrive 2, but this was not possible: ~# /usr/sbin/hpacucli ctrl slot=0 array B add spares=2I:1:8 Error: This operation is not supported with the current configuration. Use the "show" command on devices to show additional details about the configuration. ~# Interestingly it is possible to add the unassigned drive to the first array without problems. I thought maybe the controller put the array into "failed" state due to the missing spare and protects failed arrays from modification. So I tried was to reenable the logicaldrive (to add the spare afterwards): ~# /usr/sbin/hpacucli ctrl slot=0 ld 2 modify reenable Warning: Any previously existing data on the logical drive may not be valid or recoverable. Continue? (y/n) y Error: This operation is not supported with the current configuration. Use the "show" command on devices to show additional details about the configuration. ~# But as you can see, re-enabling the logicaldrive this was not possible. Now I replaced the failed drive by hotswapping it with the unassigned drive. The status now looks like this: ~# /usr/sbin/hpacucli ctrl slot=0 show config Smart Array P400 in Slot 0 (Embedded) (sn: XXXX) array A (SATA, Unused Space: 0 MB) logicaldrive 1 (698.6 GB, RAID 1, OK) physicaldrive 1I:1:1 (port 1I:box 1:bay 1, SATA, 750 GB, OK) physicaldrive 1I:1:2 (port 1I:box 1:bay 2, SATA, 750 GB, OK) array B (SATA, Unused Space: 0 MB) logicaldrive 2 (2.7 TB, RAID 5, Failed) physicaldrive 1I:1:3 (port 1I:box 1:bay 3, SATA, 750 GB, OK) physicaldrive 1I:1:4 (port 1I:box 1:bay 4, SATA, 750 GB, OK) physicaldrive 2I:1:5 (port 2I:box 1:bay 5, SATA, 750 GB, OK) physicaldrive 2I:1:6 (port 2I:box 1:bay 6, SATA, 750 GB, OK) physicaldrive 2I:1:7 (port 2I:box 1:bay 7, SATA, 750 GB, OK) ~# The logical drive is still not accessible. Why is it not rebuilding? What can I do? FYI, this is the configuration of my controller: ~# /usr/sbin/hpacucli ctrl slot=0 show Smart Array P400 in Slot 0 (Embedded) Bus Interface: PCI Slot: 0 Serial Number: XXXX Cache Serial Number: XXXX RAID 6 (ADG) Status: Enabled Controller Status: OK Chassis Slot: Hardware Revision: Rev E Firmware Version: 5.22 Rebuild Priority: Medium Expand Priority: Medium Surface Scan Delay: 15 secs Surface Analysis Inconsistency Notification: Disabled Raid1 Write Buffering: Disabled Post Prompt Timeout: 0 secs Cache Board Present: True Cache Status: OK Accelerator Ratio: 25% Read / 75% Write Drive Write Cache: Disabled Total Cache Size: 256 MB No-Battery Write Cache: Disabled Cache Backup Power Source: Batteries Battery/Capacitor Count: 1 Battery/Capacitor Status: OK SATA NCQ Supported: True ~# Thanks for you help in advance.

  Read the article

• Slow login to load-balanced Terminal Server 2008 behind Gateway Server

  - by Frans

  I have a small load-balanced (using Session Broker) Terminal Server 2008 farm behind a Gateway Server which is accessed from the Internet. The problem I have is that there is a delay of 20-30 seconds if the session broker switches the user to another server during login. I think this is related to the fact that I am forcing the security layer to be RDP rather than SSL. The background The Gateway server has a public routeable IP addres and DNS name so it can be accessed from the Internet and all users come in via this route (the system is used to provide access to hosted applications to external customers). The actual terminal servers only have internal IP addresses. This works really well, except that with a Vista or Windows 7 client, the Remote Desktop client will negotiate with the server to use SSL for the security layer. This then exposes the auto-generated certificate that TS1 or TS2 has - but since they are internal, auto-generated certificates, the client will get a stern warning that the certificate is not valid. I can't give the servers a properly authorised certificate as the servers do not have public routeable IP address or DNS name. Instead, I am using Group Policy to force the connections to be over RDP instead of SSL. \Computer Configuration\Policies\Administrative Templates\Windows Components\Terminal Services\Terminal Server\Security\Require use of specific security layer for remote (RDP) connections The Windows 7 user now gets a much less stern warning that "the server's identity cannot be confirmed" which I can live with. I don't have enough control over the end-user's machines to ask them to install a new root certificate either. TS1 and TS2 are also load-balanced using the Session Broker, which is installed on the Gateway Server. I am using round-robin DNS, so the user's initial connection will go via Gateway1 to either TS1 or TS2. TS1/TS2 will then talk to the session broker and may pass the user to the other server. I.e. the user may get connected to TS2, but after talking to the session broker the user may be passed to TS1, which is where they will run their session. When this switching of servers happens, in my setup, the screen sits with the word "Welcome" for 20-30 seconds after which it flickers, Welcome is shown again and then flashing through nthe normal login screens (i.e. "wait for user profile manager" etc). Having done some research, I think what is happening is that the user is being fully logged on to TS2 (while "Welcome" is shown) before being passed to TS1, where they are then logged in again. It is interesting that normally when you see the ""Welcome" word, the little circle to left rotates. However, it does not rotate during this delay - the screen just looks frozen. This blog post leads me to think that this is because CredSSP is not being used, probably because I am disallowing SSL and forcing RDP. What I have tried I enabled SSL again which removes the "Welcome" delay. However, it seems to introduc a new delay much earlier in the process. Specifically, when the RDP client is saying "initialising connection" - this is now much slower. Quite apart from the fact that my certificate problem precludes me using that solution without considerable difficulty. I tried disabling the load balancing (just remove the servers from the session broker farm) and the connections do not have any delay. The problem is also intermittent in the sense that it only happens when the user gets bumped from one server to another. I tested this by trying to connect directly to TS1 (via the Gateway, of course) and then checking which server I actually got connected to. Just to be sure, I also by-passed the round-robin DNS to see if it had any impact and it doesn't. The setup is essentially in line with MS recommendations here: TS Session Broker Load Balancing Step-by-Step Guide I tried changing to using a dedicated redirector. Basically, rather than using a round-robin DNS, I pointed my DNS to the Gateway server and configured it to be a dedicated redirector (disallow logons, add it to the farm). Same problem, alas. Any ideas or suggestions gratefully received.

  Read the article

• How to avoid lftp Certificate verification error?

  - by pattulus

  I'm trying to get my Pelican blog working. It uses lftp to transfer the actual blog to ones server, but I always get an error: mirror: Fatal error: Certificate verification: subjectAltName does not match ‘blogname.com’ I think lftp is checking the SSL and the quick setup of Pelican just forgot to include that I don't have SSL on my FTP. This is the code in Pelican's Makefile: ftp_upload: $(OUTPUTDIR)/index.html lftp ftp://$(FTP_USER)@$(FTP_HOST) -e "mirror -R $(OUTPUTDIR) $(FTP_TARGET_DIR) ; quit" which renders in terminal as: lftp ftp://[email protected] -e "mirror -R /Volumes/HD/Users/me/Test/output /myblog_directory ; quit" What I managed so far is, denying the SSL check by changing the Makefile to: lftp ftp://$(FTP_USER)@$(FTP_HOST) -e "set ftp:ssl-allow no" "mirror -R $(OUTPUTDIR) $(FTP_TARGET_DIR) ; quit" Due to my incorrect implementation I get logged in correctly (lftp [email protected]:~>) but the one line feature doesn't work anymore and I have to enter the mirror command by hand: mirror -R /Volumes/HD/Users/me/Test/output/ /myblog_directory This works without an error and timeout. The question is how to do this with a one liner. In addition I tried: set ssl:verify-certificate/ftp.myblog.com no This trick to disable certificate verification in lftp: $ cat ~/.lftp/rc set ssl:verify-certificate no However, it seems there is no "rc" folder in my lftp directory - so this prompt has no chance to work.

  Read the article

• Internet Explorer 8 crashes on Citrix, Windows 2003

  - by Workshop Alex

  Difficult to decide where this Q fits best. It's server-related and programming-related. But it's a user-problem so I'll put it here, first... I work on a (Delphi) application that uses an Internet Explorer component to show information to the user. It's not a web application, just a desktop application which creates HTML pages to display them within a browser component. Some of the information on these webpages are retrieved from a web server, while other information is provided "live" by the application itself. It works quite well, but it adds an IE-process (child process) next to my application. And this IE process seems to eat a lot of system resources. For normal users, this is not a real problem, so it's not an issue that I want to fix in the code. But one customer of this application uses it with about 100 users on a Citrix/Windows 2003 environment and they complain about problems with the application. IE8 tends to crash, not show, hang or cause other mayhap. Then again, I've warned them that -officially- I won't support any Citrix environment. But I'm willing to help them to find a solution to fix this, and if need be I could make minor changes to my code to help fix this issie. (If possible.) But basically, I need a solution that any user/administrator on this Citrix environment can follow/use. Any ideas on how to resolve this resource problem?

  Read the article

• Nginx: Rewrite rule for subfolder

  - by gryzzly

  Hello, I have a subdomain where I want to keep projects I am working on, in order to show these projects to clients. Here is the configuraion file from /etc/nginx/sites-available/projects: server { listen 80; server_name projects.example.com; access_log /var/log/nginx/projects.example.com.access.log; error_log /var/log/nginx/projects.example.com.error.log; location / { root /var/www/projects; index index.html index.htm index.php; } location /example2.com { root /var/www/projects/example2.com; auth_basic "Stealth mode"; auth_basic_user_file /var/www/projects/example2.com/htpasswd; } location /example3.com/ { index index.php; if (-f $request_filename) { break; } if (!-f $request_filename) { rewrite ^/example3\.com/(.*)$ /example3\.com/index.php?id=$1 last; break; } } location ~ \.php { root /var/www/mprojects; fastcgi_pass 127.0.0.1:9000; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; include /etc/nginx/fastcgi_params; } } I want to be able to place different php engines (wordpress, getsimple etc.) in subfolders. These engines have different querry parameters (id, q, url etc.) so in order to make preety URLs work I have to make a rewrite. However, above doesn't work. This is the response I get: Warning: Unknown: Filename cannot be empty in Unknown on line 0 Fatal error: Unknown: Failed opening required '' (include_path='.:/usr/local/lib/php') in Unknown on line 0 If I take out "location /example3.com/" rule, then everything works but with no preety URLs. Please help. The configuration is based on this post: http://stackoverflow.com/questions/2119736/cakephp-in-a-subdirectory-using-nginx-rewrite-rules I am using Ubuntu 9.10 and nginx/0.7.62 with php-fpm.

  Read the article

• mod perl in apache 2.2 not parsing perl scripts

  - by futureelite7

  Hi, I've set up a fresh Apache 2.2.15 server on windows server 2008 R2 with mod_perl (mod perl v2.0.4 / perl v5.10.1). Mod_perl and Perl 5.10 has been installed and loaded without problems. However, despite my configuration, the mod_perl module is failing to recognize and execute my .pl file, instead opting to print out the perl source instead. What did I do wrong, and how do I make perl process my pl script instead of sending it to the client? My configuration: <VirtualHost *:80> ServerAdmin [email protected] DocumentRoot "C:\Program Files (x86)\AWStats\wwwroot" ServerName analysis.example.com ServerAlias analysis.example.com ErrorLog "logs/analysis.example.com-error.log" CustomLog "logs/analysis.example.com-access.log" common DirectoryIndex index.php index.htm index.html PerlSwitches -T <Directory "C:\Program Files (x86)\AWStats\wwwroot"> Options Indexes FollowSymLinks AllowOverride None Order allow,deny Allow from all </Directory> <Directory "C:\Program Files (x86)\AWStats\wwwroot\cgi-bin"> AllowOverride None Options None Order allow,deny Allow from all <FilesMatch "\.pl$"> SetHandler perl-script # #PerlResponseHandler ModPerl::Registry PerlOptions +ParseHeaders Options +ExecCGI </FilesMatch> </directory> </VirtualHost> Many many thanks for the help!

  Read the article

• How many bits for sequence number using Go-Back-N protocol.

  - by Mike

  Hi Everyone, I'm a regular over at Stack Overflow (Software developer) that is trying to get through a networking course. I got a homework problem I'd like to have a sanity check on. Here is what I got. Q: A 3000-km-long T1 trunk is used to transmit 64-byte frames using Go-Back-N protocol. If the propagation speed is 6 microseconds/km, how many bits should the sequence numbers be? My Answer: For this questions what we need to do is lay the base knowledge. What we are trying to find is the size of the largest sequence number we should us using Go-Back-N. To figure this out we need to figure out how many packets can fit into our link at a time and then subtract one from that number. This will ensure that we never have two packets with the same sequence number at the same time in the link. Length of link: 3,000km Speed: 6 microseconds / km Frame size: 64 bytes T1 transmission speed: 1544kb/s (http://ckp.made-it.com/t1234.html) Propagation time = 6 microseconds / km * 3000 km = 18,000 microseconds (18ms). Convert 1544kb to bytes = 1544 * 1024 = 1581056 bytes Transmission time = 64 bytes / 1581056bytes / second = 0.000040479 seconds (0.4ms) So then if we take the 18ms propagation time and divide it by the 0.4ms transmission time we will see that we are going to be able to stuff ( 18 / 0.4) 45 packets into the link at a time. That means that our sequence number should be 2 ^ 45 bits long! Am I going in the right direction with this? Thanks, Mike

  Read the article

• Trying to run chrooted suPHP with UserDir, getting 500 server error

  - by Greg Antowski

  I've managed to get suPHP working fine with UserDir (i.e. PHP files run from the /home/$username/public_html) directory, but I can't get it to work when I chroot it to the user's home directory. I've been following this guide: http://compilefailure.blogspot.co.nz/2011/09/suphp-chroot-gotchas.html And adapting it to my needs. I'm not creating vhosts, I just want PHP scripts to be jailed to the user's home directory. I've gotten to the part where you use makejail and set up a symlink. However even with the symlink set up correctly, PHP scripts won't run. This is what's shown in the Apache error log: SoftException in Application.cpp:537: Could not execute script "/home/jimmy/public_html/test.php" [error] [client 127.0.0.1] Caused by SystemException in API_Linux.cpp:444: execve() for program "/usr/bin/php-cgi" failed: No such file or directory The thing is, if I try running either of the following commands in the terminal it works without any issues: /home/jimmy/usr/bin/php-cgi /home/jimmy/public_html/test.php /usr/bin/php-cgi /home/jimmy/public_html/test.php I've been trying for hours to get this going and documentation for this kind of stuff is almost non-existent. If anyone could help me out with this, I'd be extremely grateful.

  Read the article

• Installing ikiwiki on nginx - fastcgi/fcgi wrapper

  - by meder

  My ultimate goal is to setup ikiwiki, my current goal is to get a fcgi wrapper working for nginx, so I can move on to the next step... The ikiwiki page points out this page as an example for a fcgi wrapper: http://technotes.1000lines.net/?p=23 So far I've installed the ikiwiki and libfcgi-perl modules through aptitude: aptitude install libfcgi-perl aptitude install ikiwiki It installed those packages as well as some minimal dependency packages. So the next step following the guide at technotes, I grabbed http://technotes.1000lines.net/fastcgi-wrapper.pl but I'm not sure where to actually place this file... do I run it as a service? The script makes a socket file in /var/run/nginx but that directory does not exist.. do I manually create it? So in addition to the .pl file for the cgi wrapper, I need to also define a separate cgi file for parameters. If my conf looks like this... server { listen 80; server_name notes.domain.org; access_log /www/notes/public_html/notes.domain.org/log/access.log; error_log /www/notes/public_html/notes.domain.org/log/error.log; location / { root /www/notes/public_html/notes.domain.org/public/; index index.html; } } And I don't have a cgi-bin directory, where exactly should I create it within my structure, and regarding that I'd obviously have to update the below before I include it in my conf, but I'm just not exactly sure how this would work out. # /cgi-bin configuration location ~ ^/cgi-bin/.*\.cgi$ { gzip off; fastcgi_pass unix:/var/run/nginx/perl_cgi-dispatch.sock; [1]* fastcgi_param SCRIPT_FILENAME /www/blah.com$fastcgi_script_name; [2]* include fastcgi_params; [3]* } Also since the user is www-data and /var/run is root owned, what's the proper way of giving it access? Any tips appreciated.

  Read the article

• Apache reverse-proxy intermittent error 113 - No route to host

  - by BonkaBonka

  I've got an Apache 2.0.52 server on CentOS 4 that front-ends a couple of App servers (mix of Jetty and Tomcat). Apache has a handful of virtual hosts configured like this: <VirtualHost www1.example.com:443> ServerName www1.example.com DocumentRoot "/mnt/app_web/html" SSLEngine on SSLCipherSuite ALL:!ADH:!EXPORT56:RC4+RSA:+HIGH:+MEDIUM:+LOW:+SSLv2:+EXP SSLCertificateFile /etc/httpd/conf/ssl.crt/server.crt SSLCertificateChainFile /etc/httpd/conf/ssl.crt/chain.crt SSLCertificateKeyFile /etc/httpd/conf/ssl.key/server.key SetEnvIf User-Agent ".*MSIE.*" nokeepalive ssl-unclean-shutdown downgrade-1.0 force-response-1.0 RewriteEngine on RewriteRule ^/app1/(.*)$ http://app1.example.com:8080/app1/$1 [P,L] RewriteRule ^/app2/(.*)$ http://app2.example.com:8080/app2/$1 [P,L] </VirtualHost> However, I'm getting the following errors in the logs intermittently: [Fri Dec 04 07:19:41 2009] [error] (113)No route to host: proxy: HTTP: attempt to connect to 10.0.0.1:8080 (app1.example.com) failed I initially tried turning off IPv6, and that seemed to largely cure it, but I still have sporadic bursts of these messages. Additionally, we're running memcache on same front-end and during the times when I'm getting those messages in Apache's log, the following command doesn't work: echo stats | nc 127.0.0.1 11211 No messages are printed, but neither are the stats printed. I am completely lost as to how to proceed with troubleshooting this. =(

  Read the article

• apache Client Certificate Authentication errors: Certificate Verification: Error (18): self signed certificate

  - by decoy

  So I have been following instructions on setting up Client Certificate Authentication in Apache2 w/ mod_ssl. This is solely for the purpose of testing an application against CAA, not for any sort of production use. So far I've followed http://www.impetus.us/~rjmooney/projects/misc/clientcertauth.html for advice on generating my CA, server, and client encryption information. I've put all three of them into /etc/ssl/ca/private. I've setup the following additional directives in my default_ssl site file: <IfModule mod_ssl.c> <VirtualHost _default_:443> ... SSLEngine on SSLCertificateFile /etc/ssl/ca/private/server.crt SSLCertificateKeyFile /etc/ssl/ca/private/server.key SSLVerifyClient require SSLVerifyDepth 2 SSLCACertificatePath /etc/ssl/ca/private SSLCACertificateFile /etc/ssl/ca/private/ca.crt <Location /> SSLRequireSSL SSLVerifyClient require SSLVerifyDepth 2 </Location> <FilesMatch "\.(cgi|shtml|phtml|php)$"> SSLOptions +StdEnvVars </FilesMatch> <Directory /usr/lib/cgi-bin> SSLOptions +StdEnvVars </Directory> ... </VirtualHost> </IfModule> I've install the p12 file into Chrome, but when I go to visit https://localhost, I get the following errors Chrome: Error 107 (net::ERR_SSL_PROTOCOL_ERROR): SSL protocol error. Apache: Certificate Verification: Error (18): self signed certificate If I had to guess, one of my directives is not setup right to load and verify the p12 w/ my self created CA. But I can't for the life of me figure out what it is. Would anyone have more experience here who could point me in the right direction?

  Read the article

• Router for creating site to site VPN to server provider using Cisco ASA 5540

  - by fondie

  We have dedicated servers hosted for us by a third party, we connect to these over a VPN. My server provider uses Cisco ASA 5540 as VPN devices. Currently we're using software clients on individual machines to connect to this VPN, either: Cisco VPN Client Shrew Soft VPN Connect However, I'm looking to purchase a new load balancing router for our office and thought this could be an opportunity to get VPN client duties taken over by hardware. We could then create a permanent VPN tunnel that could be used by anyone on the network with no software client necessary. Sadly I'm not the most knowledgeable on this kind of stuff so is: 1) This a realizable goal? Next I need to know what kind of hardware I will need. I'm not looking to spend lots of money on this (~$500), so doubtful I can afford any Cisco kit. Therefore, this is the most promising candidate I've seen (as far as my limited knowledge goes): Draytek Vigor 2955 - http://www.draytek.co.uk/products/vigor2955.html 2) Would this be compatible with the Cisco kit my server provider uses? 3) If not, are there any alternatives I should consider? Many thanks in advance.

  Read the article

• Squid external_acl_type Cannot run process

  - by Alex Rezistorman

  I want to restrict uploading for group of the users via squid. So I've choosen to use external_acl_type but after reload of the squid it returns error. WARNING: Cannot run '/usr/local/etc/squid/lists/newupload.sh' process. Permissions of newupload.sh and squid are the same. newupload.sh is executive. How can I solve this problem? Thnx in advance. newupload.sh #!/bin/sh while read line; do set -- $line length=$1 limit=$2 if [ -z "$length" ] || [ "$length" -le "$2" ]; then echo OK else echo ERR fi done Strings from squid.conf external_acl_type request_body protocol=2.5 %{Content-Lenght} /usr/local/etc/squid/lists/newupload.sh acl request_max_size external request_body 5000 http_access allow users request_max_size Squid version squid -v Squid Cache: Version 3.2.13 configure options: '--with-default-user=squid' '--bindir=/usr/local/sbin' '--sbindir=/usr/local/sbin' '--datadir=/usr/local/etc/squid' '--libexecdir=/usr/local/libexec/squid' '--localstatedir=/var' '--sysconfdir=/usr/local/etc/squid' '--with-logdir=/var/log/squid' '--with-pidfile=/var/run/squid/squid.pid' '--with-swapdir=/var/squid/cache/squid' '--enable-auth' '--enable-build-info' '--enable-loadable-modules' '--enable-removal-policies=lru heap' '--disable-epoll' '--disable-linux-netfilter' '--disable-linux-tproxy' '--disable-translation' '--enable-auth-basic=PAM' '--disable-auth-digest' '--enable-external-acl-helpers= kerberos_ldap_group' '--enable-auth-negotiate=kerberos' '--disable-auth-ntlm' '--without-pthreads' '--enable-storeio=diskd ufs' '--enable-disk-io=AIO Blocking DiskDaemon IpcIo Mmapped' '--enable-log-daemon-helpers=file' '--disable-url-rewrite-helpers' '--disable-ipv6' '--disable-snmp' '--disable-htcp' '--disable-forw-via-db' '--disable-cache-digests' '--disable-wccp' '--disable-wccpv2' '--disable-ident-lookups' '--disable-eui' '--disable-ipfw-transparent' '--disable-pf-transparent' '--disable-ipf-transparent' '--disable-follow-x-forwarded-for' '--disable-ecap' '--disable-icap-client' '--disable-esi' '--enable-kqueue' '--with-large-files' '--enable-cachemgr-hostname=proxy.adir.vbr.ua' '--with-filedescriptors=131072' '--disable-auto-locale' '--prefix=/usr/local' '--mandir=/usr/local/man' '--infodir=/usr/local/info/' '--build=amd64-portbld-freebsd8.3' 'build_alias=amd64-portbld-freebsd8.3' 'CC=cc' 'CFLAGS=-O2 -fno-strict-aliasing -frename-registers -fweb -fforce-addr -fmerge-all-constants -maccumulate-outgoing-args -pipe -march=core2 -I/usr/local/include -DLDAP_DEPRECATED' 'LDFLAGS= -L/usr/local/lib' 'CPPFLAGS=-I/usr/local/include' 'CXX=c++' 'CXXFLAGS=-O2 -fno-strict-aliasing -frename-registers -fweb -fforce-addr -fmerge-all-constants -maccumulate-outgoing-args -pipe -march=core2 -I/usr/local/include -DLDAP_DEPRECATED' 'CPP=cpp' --enable-ltdl-convenience Related post: Restrict uploading for groups in squid http://squid-web-proxy-cache.1019090.n4.nabble.com/flexible-managing-of-request-body-max-size-with-squid-2-5-STABLE12-td1022653.html

  Read the article

• Debugging UI Problems in IE8 (Was IE8 on Windows 7 Authentication Mess)

  - by alharaka

  UPDATE: I think the real question I need to ask here is: how does a technician debug UI problems with Internet Explorer, and not HTML rendering issues that have pretty good tools? I am aware of the SysInternals tools and others mentioned below, but maybe I am not harnessing their power properly. Someone else in the TechNet forum I mentioned had a similar issue. Again, I have lots of data, I am not sure how to properly interpret it. ORIGINAL POST: So I tried the venerable Technet Forums to solve this isse. In short, the Windows Security dialog has no place to put credentials, rendering pretty much useless. This happens to apply for a whole bunch of our intranet websites, and only a select number of users with a few laptops have this problem. It ends up looking like this. Things I have tried so far: Disabling local Group Policy (not domain connected) Disabling local Security Policy Resetting IE settings A few system restores Re-registering a bunch of IE DLL's and all other steps here Reinstalling IE8 (dism /online /disable-feature /featurename:"internet-explorer-optional-x86, reboot, dism /online /enable-feature /featurename:"internet-explorer-optional-x86, and reboot) And SFC scan, which found nothing Still, nothing. Not only am I fed up, but I have begun to really work with APIExplorer and Procmon as mentioned in the Technet original because I want to know WHAT is happening, not just fix it. Any thoughts?

  Read the article

• IIS6 Wildcard Mapping to ASP.NET - no file extension results in IIS 404

  - by Ian Robinson

  I'm trying to perform what I understand to be a relatively simple task. I'd like to remove the extensions from the URLs on my website. I have the proper set up in my application to handle and rewrite the URLs - the trouble is I can't get past IIS to actually get to my application without the extensions. The details: I'm running IIS6 on Windows Server 2003. I've gone into the web site for my application, gone to the home directory tab, clicked "Configuration" and added a wildcard map to the following file: c:\windows\microsoft.net\framework\v2.0.50727\aspnet_isapi.dll Which I verified is the same as what is used above in the application extensions portion by .ascx, etc. If I navigate to http://mywebsite.com/Blogs the result is as follows: HTTP/1.1 404 Not Found Content-Length: 1635 Content-Type: text/html Server: Microsoft-IIS/6.0 X-Powered-By: ASP.NET Date: Thu, 14 Jan 2010 15:04:49 GMT Which seems to be a standard IIS 404 message. If I navigate to http://mywebsite.com/Blogs.aspx I get my ASP.NET app.... How can I troubleshoot this? I feel like I've double checked everything a dozen times but to no avail. I must be missing something obvious. Update: Here are the exact instructions given by the asp.net url rewriter that I'm using: IIS 6.0 - Windows 2003 Server open property page for website / virtual directory. click the 'home directory' tab click the 'configuration' button, select the 'mappings' tab click 'insert' next to the 'Wildcard application maps' section browse to the aspnet_isapi.dll (normally at c:\windows\microsoft.net\framework\v2.0.50727\aspnet_isapi.dll) Ensure that 'check that file exists' is unchecked Click OK, OK, OK to close and apply changes Update 2: I have yet to find a resolution for this. The application does not seem to be receiving the request from IIS, any further ideas?

  Read the article

• Active FTP client blocked by Windows Firewall on Windows 7

  - by Eli

  I have an application that runs as a service and contains an FTP client. It needs to connect to an FTP server that only supports Active FTP. When I attempt to get a list of files or download a file, Windows Firewall is dropping the incoming connection from the FTP server. (I don't believe we had this problem in Windows XP or Windows Vista.) Active FTP is the protocol that requires the the server to open a connection to the client on a port that the client specified. (http://slacksite.com/other/ftp.html) I know I could open up a large port range in Windows Firewall and force my FTP client to only use those ports, but I would have guessed that Windows Firewall would support Active FTP natively. Is there some setting that needs to be made in order to have Windows Firewall automatically detect Active FTP and open up the necessary ports as needed? Can I change that setting programmatically? Thanks. PS- I asked this question on StackOverflow, but was told I should probably ask here as well.

  Read the article

< Previous Page | 1185 1186 1187 1188 1189 1190 1191 1192 1193 1194 1195 1196  | Next Page >