Search Results

Search found 4275 results on 171 pages for 'accept'.

Page 119/171 | < Previous Page | 115 116 117 118 119 120 121 122 123 124 125 126  | Next Page >

• eee box "drobpox" server 24/7

  - by microspino

  I'd like to create a mini dropbox and print server on a small soho network of 5 users (all of them use windows XP desktops). The device need to run 24/7 or at least 12/7 (I can accept just workday hours too but the other two options would be better). Dropbox mini server: I mean I will have a 90gb dropbox on every computer on my network LAN syncing with It and the one onto It syncing to the web. Print Server: I have a Samsung A4 small laser printer, a HP500 Designjet Plotter, a Samsung Multifunction Machine (fax/print/scan/copy), a modern HP color A3 Deskjet printer and a HP laserjet A4 color printer. All of them need to be connected to this mini server. Fax/Scan server: since I have the above mentioned fax/print/scan/copy machine I would like to make people use It from/to their computers through the mini server. I thought to a recent EEEBOX machine because I heard good things about ATOM cpus and because It seems that a recent BIOS version could switch It off and on autonomously. I'd like to listen some advice from You. Best of all would be: - If You have something similar running for a long time - If You disagree with this hardware choice and If You would suggest some other device. - If You see any issues with my printing setup - Anything else ;) My budget is from Zero (using right sw to build something on top on a old PC) to 500€ max.

  Read the article

• cURL hangs trying to upload file from stdin

  - by SidneySM

  I'm trying to PUT a file with cURL. This hangs: curl -vvv --digest -u user -T - https://example.com/file.txt < file This does not: curl -vvv --digest -u user -T file https://example.com/file.txt What's going on? * About to connect() to example.com port 443 (#0) * Trying 0.0.0.0... connected * Connected to example.com (0.0.0.0) port 443 (#0) * SSLv3, TLS handshake, Client hello (1): * SSLv3, TLS handshake, Server hello (2): * SSLv3, TLS handshake, CERT (11): * SSLv3, TLS handshake, Server key exchange (12): * SSLv3, TLS handshake, Server finished (14): * SSLv3, TLS handshake, Client key exchange (16): * SSLv3, TLS change cipher, Client hello (1): * SSLv3, TLS handshake, Finished (20): * SSLv3, TLS change cipher, Client hello (1): * SSLv3, TLS handshake, Finished (20): * SSL connection using DHE-RSA-AES256-SHA * Server certificate: * subject: serialNumber=jJakwdOewDicmqzIorLkKSiwuqfnzxF/, C=US, O=*.example.com, OU=GT01234567, OU=See www.example.com/resources/cps (c)10, OU=Domain Control Validated - ExampleSSL(R), CN=*.example.com * start date: 2010-01-26 07:06:33 GMT * expire date: 2011-01-28 11:22:07 GMT * common name: *.example.com (matched) * issuer: C=US, O=Equifax, OU=Equifax Secure Certificate Authority * SSL certificate verify ok. * Server auth using Digest with user 'user' > PUT /file.txt HTTP/1.1 > User-Agent: curl/7.19.4 (universal-apple-darwin10.0) libcurl/7.19.4 OpenSSL/0.9.8l zlib/1.2.3 > Host: example.com > Accept: */* > Transfer-Encoding: chunked > Expect: 100-continue > < HTTP/1.1 100 Continue

  Read the article

• Why can't I copy .zip files from a server to a server in a different domain?

  - by Kyralessa

  At work, we're using a Windows Server 2008 R2 VM as our build server. At the end of the build process for any of our projects, we copy the packaged deployment files to a folder on the server where they'll be deployed. (This is done in a batch command by a service account.) For most of our projects, which deploy to a Windows Server 2008 R2 VM, this step goes swimmingly. But for one project, which deploys to a Windows Server 2003 R2 VM which resides in a different domain on our network, the .zip files return "Access is denied" and don't copy, though all of the other files copy correctly. Our sysadmins say they haven't prevented this in group policy or by other means. If I'm logged in the build server as myself and run the copy in the command window, I can't copy the .zip files over either, so it's not just a matter of the service account's permissions. If I log into the 2003 server and then copy from the build server to the 2003 server, using the command window, it works, whether I run as myself or as our service account. Only .zip files cause the "Access is denied" problem. Even a (fake) .exe file copies correctly. All of our other projects have .zip files, and they copy to their 2008 R2 server correctly. Is there a way I can get the Windows Server 2003 R2 VM to accept .zip files copied from our build server?

  Read the article

• Windows errors, how do I find root cause and fix it? Getting several errors

  - by Eric Martin

  My server is having issues and not responding to customer's https requests. I checked the event viewer and found several errors. These two are listed a couple of times: WINS encountered a database error. This may or may not be a serious error. WINS will try to recover from it. You can check the database error events under 'Application Log' category of the Event Viewer for the Exchange Component, ESENT, source to find out more details about database errors. If you continue to see a large number of these errors consistently over time (a span of few hours), you may want to restore the WINS database from a backup. The error number is in the second DWORD of the data section. And this one: An error occured while using SSL configuration for socket address 0.0.0.0:444. The error status code is contained within the returned data. SQL Server is not ready to accept new client connections. Wait a few minutes before trying again. If you have access to the error log, look for the informational message that indicates that SQL Server is ready before trying to connect again. [CLIENT: xxx.xxx.xxxx.xxx] I also found this in the event viewer but the computer has been restarted since this message and I have not seen it again. Configuring the Page file for crash dump failed. Make sure there is a page file on the boot partition and that is large enough to contain all physical memory. This is my virtual memory settings: I'm not familiar with WINS so I wasn't sure if that is where I start or how to resolve it. Is the WINS error causing the other problems or should I be looking somewhere else?

  Read the article

• Line-length-tolerant XML diff

  - by Jon Skeet

  I've looked at the answers to this question, and unfortunately none of them has helped me so far. Not to beat about the bush, the second edition of C# in Depth is now in copy edit. I want to be able to see what the copy editor's done really easily, so I can reject or accept his changes. We're using a modified form of docbook, but I'm happy enough looking at the raw XML source. All fine so far - except that when the copy editor makes a change, that can change the line wrapping. So something that used to read: <para>Foo bar baz second line</para> now reads <para>Foo bar grontle baz second line</para> Now the real change here is the insertion of "grontle". I don't care that "baz" has moved from the first line to the second line... but all the diff tools I've seen do. I realise that one option would be to reformat the whole document (or possibly just whole paragraphs) into single lines... but that's then really hard to read, because diff tools don't wrap when they're displaying. I'm sure I can manage with the tools I've got, but if anyone knows of anything better, I'd be really glad to hear about it. I suspect my publishers would too :) (I've included the Windows tag here because I'd really need it to be available on Windows. I'd like to hear about any non-Windows software too, but only in case I could help to build it on Windows :)

  Read the article

• Postfix Whitelist before recipient restrictions

  - by GruffTech

  Alright. Some background. We have an anti-spam cluster trucking about 2-3 million emails per day, blocking somewhere in the range of 99% of spam email from our end users. The underlying SMTP server is Postfix 2.2.10. The "Frontline defense" before mail gets carted off to SpamAssassin/ClamAV/ ect ect, is attached below. ...basic config.... smtpd_recipient_restrictions = reject_unauth_destination, reject_rbl_client b.barracudacentral.org, reject_rbl_client cbl.abuseat.org, reject_rbl_client bl.mailspike.net, check_policy_service unix:postgrey/socket ...more basic config.... As you can see, standard RBL services from various companies, as well as a Postgrey service. The problem is, I have one client (out of thousands) who is very upset that we blocked an important email of theirs. It was sent through a russian freemailer who was currently blocked in two of our three RBL servers. I explained the situation to them, however they are insisting we do not block any of their emails. So i need a method of whitelisting ANY email that comes to domain.com, however i need it to take place before any of the recipient restrictions, they want no RBL or postgrey blocking at all. I've done a bit of research myself, http://www.howtoforge.com/how-to-whitelist-hosts-ip-addresses-in-postfix seemed to be a good guide at first, almost fixing my problem, But i want it to accept based on TO address, not originating server.

  Read the article

• What's wrong with this HTTP POST request?

  - by bigboy

  I'm trying to fuzz a server using the Sulley fuzzing framework. I observe the following stream in Wireshark. The error talks about a problem with JSON parsing, however, when I try the same HTTP POST request using Google Chrome's Postman extension, it succeeds. Can anyone please explain what could be wrong about this HTTP POST request? The JSON seems valid. POST /restconf/config HTTP/1.1 Host: 127.0.0.1:8080 Accept: */* Content-Type: application/yang.data+json { "toaster:toaster" : { "toaster:toasterManufacturer" : "Geqq", "toaster:toasterModelNumber" : "asaxc", "toaster:toasterStatus" : "_." }} HTTP/1.1 400 Bad Request Server: Apache-Coyote/1.1 Content-Type: */* Transfer-Encoding: chunked Date: Sat, 07 Jun 2014 05:26:35 GMT Connection: close 152 <?xml version="1.0" encoding="UTF-8" standalone="no"?> <errors xmlns="urn:ietf:params:xml:ns:yang:ietf-restconf"> <error> <error-type>protocol</error-type> <error-tag>malformed-message</error-tag> <error-message>Error parsing input: Root element of Json has to be Object</error-message> </error> </errors> 0

  Read the article

• Getting 502 instead of 503 when all backend servers are down running HAProxy behind Apache

  - by scarba05

  I'm testing running HAProxy as a dedicated load balancer behind Apache 2.2, replacing our current configuration where we use Apache's load balancer. In our current, Apache only, set-up if all the backend (origin) servers are down Apache will serve a 503 service unavailable message. With HAProxy I get a 502 bad gateway response. I'm using a simple reverse proxy rewrite rule in Apache RewriteRule ^/(.*) http://127.0.0.1:8000/$1 [last,proxy] In HAProxy I have the following (running in default tcp mode) defaults log global option tcp-smart-accept timeout connect 7s timeout client 60s timeout queue 120s timeout server 60s listen my_server 127.0.0.1:8000 balance leastconn server backend1 127.0.0.1:8001 check observe layer4 maxconn 2 server backend1 127.0.0.1:8001 check observe layer4 maxconn 2 Testing connecting directly to the load balancer when the backend servers are down: [root@dev ~]# wget http://127.0.0.1:8000/ test.html --2012-05-28 11:45:28-- http://127.0.0.1:8000/ Connecting to 127.0.0.1:8000... connected. HTTP request sent, awaiting response... No data received. So presumably this is down to the fact that HAProxy accepts the connection and then closes it.

  Read the article

• Binding to LDAPS using PHP failing

  - by Sean

  We've finally set-up our server to accept ldap SSL connections thanks to another question answered by a helpful member. Our problem now is that when attempting to bind to ldap using the below simple PHP script, we constantly fail. Binding using ldap instead of ldaps works just fine using the script so I know the ldap is enabled. The catcher is that while using LDP.exe, we can successfully connect and bind to ldap on port 636 using a secure connection. The script we are failing with is below: <?php $ldap = ldap_connect("ldaps://localhost"); $username="user"; $password="pass"; if($bind = ldap_bind($ldap, $username,$password )) echo "logged in"; else echo "fail"; echo "<br/>done"; ?> We've also attempted inputting the username as "user@domain" or "domain/user" with no success. It seems I'm forever having LDAP/Cert questions. Our environment is Server 2008.

  Read the article

• EEE PC dropbox server running 24/7

  - by microspino

  I'd like to create a mini dropbox and print server on a small soho network of 5 users (all of them use windows XP desktops). The device need to run 24/7 or at least 12/7 (I can accept just workday hours too but the other two options would be better). Dropbox mini server: I mean I will have a 90gb dropbox on every computer on my network LAN syncing with It and the one onto It syncing to the web. Print Server: I have Samsung SCX 4521F (fax/print/scan/copy), Samsung ML2010, HP Laser jet P1006, HP Color Laserjet CP1215, HP Office jet pro K8600, HP Design jet 500. All of them now are connected using little print servers and I want to get rid of them hooking everything to this mini server. The fax/print/scan/copy machine need to stay connected to a PC to make me able to use the software that comes with It. The mini server would save me on this too. Fax/Scan server: since I have the above mentioned fax/print/scan/copy machine I would like to make people use It from/to their computers through the mini server. I thought to a recent EEEBOX machine because I heard good things about ATOM cpus and because It seems that a recent BIOS version could switch It off and on autonomously. I'd like to listen some advice from You. Best of all would be: If You have something similar running for a long time If You disagree with this hardware choice and If You would suggest some other device. If You see any issues with my printing setup Anything else ;) My budget is from Zero (using right sw to build something on top on a old PC) to 500€ max.

  Read the article

• Two hosted servers, one public - VPN?

  - by Aquitaine

  Hello there, Web developer here who has to occasionally wear a system & network admin hat (small company). We currently have a single hosted server running Windows Server 2003 that runs both our web server (IIS/Coldfusion) and our database server (SQL Server 2008). We lock down the SQL server by allowing only specific IPs to connect to it. Not ideal but it's worked thus far. We're moving up to two distinct servers and I want to take the opportunity to 'get things right' and make only the web server face the public. What I need to be able to do is to allow only a handful of people to connect to the database server. Rather than using an IP allow list, I'd prefer to use a VPN to let people through so that access is based on the user and not simply the user's location. I'm leaning toward something like OpenVPN, just so I can stick with Server 2008 Web edition. Do I: Use the web server as a VPN server and set up the database server to only accept connections from the web server? Is there an extra step required to make connections to, say, db.mycompany.com route through the VPN rather than through a different connection? I'm ignorant of this part of network infrastructure stuff. Or, Set up a VPN server on the database server as the only public-facing server connection so that there aren't any routing issues to deal with? I know this is Network 101 stuff but I thought I'd ask before just blundering through it since it could affect the company a bit. Thanks very much!

  Read the article

• OpenBSD logins via SSH seem to be ignoring my configured radius server

  - by Steve Kemp

  I've installed and configured a radius server upon my localhost - it is delegating auth to a remote LDAP server. Initially things look good: I can test via the console: # export user=skemp # export pass=xxx # radtest $user $pass localhost 1812 $secret Sending Access-Request of id 185 to 127.0.0.1 port 1812 User-Name = "skemp" User-Password = "xxx" NAS-IP-Address = 192.168.1.168 NAS-Port = 1812 rad_recv: Access-Accept packet from host 127.0.0.1 port 1812, id=185, Similarly I can use the login tool to do the same thing: bash-4.0# /usr/libexec/auth/login_radius -d -s login $user radius Password: $pass authorize However remote logins via SSH are failing, and so are invokations of "login" started by root. Looking at /var/log/radiusd.log I see no actual log of success/failure which I do see when using either of the previous tools. Instead sshd is just logging: sshd[23938]: Failed publickey for skemp from 192.168.1.9 sshd[23938]: Failed keyboard-interactive for skemp from 192.168.1.9 port 36259 ssh2 sshd[23938]: Failed password for skemp from 192.168.1.9 port 36259 ssh2 In /etc/login.conf I have this: # Default allowed authentication styles auth-defaults:auth=radius: ... radius:\ :auth=radius:\ :radius-server=localhost:\ :radius-port=1812:\ :radius-timeout=1:\ :radius-retries=5:

  Read the article

• 2000 Server, User can't logon

  - by Mike I

  I hope you can help me. I recently upgraded a workstation at my office (to a whole new machine) and ran into a pretty serious problem. Friday until 5:00 PM, I could access my mail on 2000 Exchange server. When I shut the old workstation down and put in the new workstation, I tried to set up an account. When I put the server name in appropriate field and typed my username and hit check names, my username does not come up. So to troubleshoot, (It also is a SMB server) I try to logon to my file share. (My local credentials are the same as server credientials of user account) When I try to logon to share, I just get the Username/Password screen (Never had gotten that before since credentials are the same) Again, in troubleshooting mode, I try to log on to my user from another workstation. Still can't authenticate via my user. Every other user can authenticate and load up their shares/mailboxes. I have restored Exchange from the backup as of 3 days ago (Thursday) but the exact same issue is still there. I really do not understand what is wrong and what else I can do to troubleshoot. If anyone has some pointers for me, I will surely accept them. Thanks, Mike

  Read the article

• Remote Desktop *from* Windows 2008 R2 Server

  - by freefaller

  Summary: how do I create an RDC connection from a Windows 2008 server to another server? Our client will only allow us to connect to their server via a static IP address (which is fair enough), but unfortunately as we're a very small company we don't have one in the office. As a work around, we had the connection working through our old Windows 2003 server (dynamic-cloud from 1and1). .. however we have just rebuilt the server to run under Windows 2008 R2 (don't ask, but it was necessary), and now I simply cannot get the connection working. I have added an "Outbound Rule" to Windows Firewall with Advanced Security (TCP, All local ports, 3389 remote port - I have also tried the other way around). I have added a packet filter IP security rule with the same details. The 1and1 firewall rules (through their online control panel) allows for 3389 TCP and UDP. But it is simply not connecting (yes, the server is definitely on and able to accept connections) with the general error of... Remote Desktop can’t connect to the remote computer for one of these reasons: 1) Remote access to the server is not enabled 2) The remote computer is turned off 3) The remote computer is not available on the network Is there anything obvious I've missed - or something I can use to find out where the request is being blocked? The new server is using the exact same IP address as before, so I don't believe that would be an issue. Unless it's trying to use an IPv6 address rather than the old IPv4 address that it was before? I apologise that I am not a network person by trade, but I know more than anybody else in my office!!

  Read the article

• How should I manage VPS email?

  - by Xeoncross

  I have been slowly learning how to run a linux VPS for a while now. Since I build websites I'm confident with running and securing a web server like nginx... or at least there haven't been any casualties yet. However, email scares me. Almost all websites require email to communicate with users. Most of the time email is only needed on my sites during registration as a means of verification. I hardly ever need to accept incoming mail back. Nevertheless, my lack off understanding of how email servers can be abused is worrying me. Not only do you need to secure email servers - you also have to prove to the world that your emails are legit and constantly fight against being blacklisted. Insuring my emails 'good name' is not something I want to devote my life too. What should someone like me do to send emails from my VPS? Should I look for a company to send email through that can worry about this for me? Should I just use google apps until my sites are large enough to worry about? Or is all this just ignorant fear and running your own email server (that actually works) really is easy?

  Read the article

• Apache2 - Hosting two sites on the same domain with different ports

  - by user1026361

  I am hosting a staging site (test.mydomain.com) which currently work well on port 80 for two sites (test.mydomain.com and test.FRmydomain.com) I am working on a new backend and I would like to deploy a third site on this server for testing. My hope is that it will live at test.mydomain.com:4204. I've got some experience with apache and quickly added statements: Listen 4204 NameVirtualHost *:4204 and created a new config for my site. What I imagine are the relevant parts of my config: <VirtualHost *:4204 > ServerAdmin [email protected] ServerName test.mydomain.com:4204 However, the site is not publicly available, by name or ip. If i curl localhost:4204 from the server, I get the expected page content At this point, I'm a bit of a loss on how to go forwards. It seems like my config is correct but not available to be served. Am I better off defining a proxy definition so that, for instance: test.mydomain.com/4204 proxies to my localhost server or is there a way to make the site available via the internet? EDIT: I have added an iptable rule after further Googling with the command: iptables -I INPUT -p tcp --dport 4204 -j ACCEPT I can see apache listening on 4204 and the rule is definitely in place but cant reach the site

  Read the article

• Running multiple sites on a LAMP with secure isolation

  - by David C.

  Hi everybody, I have been administering a few LAMP servers with 2-5 sites on each of them. These are basically owned by the same user/client so there are no security issues except from attacks through vulnerable deamons or scripts. I am builing my own server and would like to start hosting multiple sites. My first concern is... ISOLATION. How can I avoid that a c99 script could deface all the virtual hosts? Also, should I prevent that c99 to be able to write/read the other sites' directories? (It is easy to "cat" a config.php from another site and then get into the mysql database) My server is a VPS with 512M burstable to 1G. Among the free hosting managers, is there any small one which works for my VPS? (which maybe is compatible with the security approach I would like to have) Currently I am not planning to host over 10 sites but I would not accept that a client/hacker could navigate into unwanted directories or, worse, run malicious scripts. FTP management would be fine. I don't want to complicate things with SSH isolation. What is the best practice in this case? Basically, what do hosting companies do to sleep well? :) Thanks very much! David

  Read the article

• Dynamic fowarding with SOCKS5 proxy [on hold]

  - by bh3244

  I'm building my own SOCKS5 client and HTTP library and am having trouble figuring out how things work with dynamic port forwarding. So far I can connect successfully with my SOCKS5 client, but from there on I am stuck. I am using the ssh -D command. Considering I have my local machine "home" and my server "server" and I wanted to use "server" as proxy for all connections I understand I would type ssh -D "localport" "serverhostname" on my local machine "home". This command I understand has ssh accept connections with the SOCKS5 protocol. So now if I want to connect to google.com(74.125.224.72:80) and issue a GET for the front page, I assume I would send the SOCKS5 client request and the server would respond back with a 0x00 "succeeded" and from then on I am connected and I would send the HTTP GET request and the server would respond back accordingly with the data. Now if I want to navigate to a different website, must I issue another SOCKS5 connection request for that sites IP/hostname? I'm confused if this is the way it is done, or if there is a program listening on the local port of the "server" and handling outgoing and incoming data. To reiterate: Do SOCKS5 proxies work by sending repeated SOCKS5 connection requests for different addresses or is there just one connection to a local port on "server" and another program on "server" handles the outgoing connection to the internet by using that local port to send and receive data to/from "home"?

  Read the article

• How to route to a secondary interface on the same physical ethernet?

  - by sjose3612611

  INTERNET<->(wan)BRIDGED_DEVICE(lan)<->ETH_ROUTER<->LAN Problem: Need to access web server on BRIDGED_DEVICE's LAN from INTERNET via ROUTER (BRIDGED_DEVICE's web server cannot be accessed form INTERNET since it has no Public management IP). Cannot configure bridged device. It has a static IP on its LAN to which its web server binds. Attempt: Create a secondary/alias WAN Interface on ETH_ROUTER (e.g Primary: eth0.1 (for internet access) and Secondary: eth0.2 (for accessing web server on BRIDGED_DEVICE), (No VLANs). eth0.1 has a public IP; eth0.2 has a static private IP in the BRIDGED_DEVICE's subnet (e.g 10.0.X.Y). Iptables on ETH_ROUTER: Added a port forward (DNAT) from eth0.1 to eth0.2: iptables -t nat -I PREROUTING -i eth0.1 -p tcp --dport 80 -j DNAT --to-destination 10.0.X.Y iptables -t nat -I POSTROUTING -o eth0.2 -s 10.0.X.0/24 -j MASQUERADE Stateful firewall w/ overall drop policy on FORWARD chain, hence: iptables -I FORWARD -i eth0.1 -d 10.0.X.Y -p tcp --dport 80 -j ACCEPT Can ping from ETH_ROUTER to BRIDGED_DEVICE but unable to reach the web server from Internet. I see packet cont increasing for the DNAT rule but not sure where it disappears in the ETH_ROUTER after that. ETH_ROUTER is the only device that can be configured to achieve this. If familiar with this scenario, please suggest what I may be missing or doing wrong here or suggest techniques to debug?

  Read the article

• postfix is unable to send emails to external domains

  - by BoCode

  Whenever i try to send an email from my server, i get the following error: Nov 13 06:37:21 xyz postfix/smtpd[6730]:connect from unknown[a.b.c.d] Nov 13 06:37:21 xyz postfix/smtp[6729]: warning: host X.com[x.y.z.d]:25 greeted me with my own hostname xyz.biz Nov 13 06:37:21 xyz postfix/smtp[6729]: warning: host X.com[x.y.z.d]:25 replied to HELO/EHLO with my own hostname xyz.biz Nov 13 06:37:21 xyz postfix/smtp[6729]: 2017F1B00C54: to=<[email protected]>, relay=X.com[x.y.z.d]:25, delay=0.98, delays=0.17/0/0.81/0, dsn=5.4.6, status=bounced (mail for X.com loops back to myself) this is the output of postconf -n: address_verify_poll_delay = 1s alias_database = hash:/etc/aliases alias_maps = body_checks_size_limit = 40980000 command_directory = /usr/sbin config_directory = /etc/postfix connection_cache_ttl_limit = 300000s daemon_directory = /usr/libexec/postfix data_directory = /var/lib/postfix debug_peer_level = 1 debugger_command = PATH=/bin:/usr/bin:/usr/local/bin:/usr/X11R6/bin ddd $daemon_directory/$process_name $process_id & sleep 5 default_delivery_slot_cost = 2 default_destination_concurrency_limit = 10 default_destination_recipient_limit = 1 default_minimum_delivery_slots = 3 default_process_limit = 10000 default_recipient_refill_delay = 1s default_recipient_refill_limit = 10 disable_dns_lookups = yes enable_original_recipient = no hash_queue_depth = 2 home_mailbox = Maildir/ html_directory = no in_flow_delay = 0 inet_interfaces = all inet_protocols = ipv4 initial_destination_concurrency = 100 local_header_rewrite_clients = mail_owner = postfix mailq_path = /usr/bin/mailq manpage_directory = /usr/share/man master_service_disable = milter_default_action = accept milter_protocol = 6 mydestination = $myhostname, localhost.localdomain, localhost, $mydomain mydomain = xyz.biz myhostname = xyz.biz mynetworks = 168.100.189.0/28, 127.0.0.0/8 myorigin = $mydomain newaliases_path = /usr/bin/newaliases non_smtpd_milters = $smtpd_milters qmgr_message_active_limit = 500 qmgr_message_recipient_limit = 500 qmgr_message_recipient_minimum = 1 queue_directory = /var/spool/postfix queue_run_delay = 300s readme_directory = /usr/share/doc/postfix.20.10.2/README_FILE receive_override_options = no_header_body_checks sample_directory = /usr/share/doc/postfix.2.10.2/examples sendmail_path = /usr/sbin/sendmail service_throttle_time = 1s setgid_group = postdrop smtp_always_send_ehlo = no smtp_connect_timeout = 1s smtp_connection_cache_time_limit = 30000s smtp_connection_reuse_time_limit = 30000s smtp_delivery_slot_cost = 2 smtp_destination_concurrency_limit = 10000 smtp_destination_rate_delay = 0s smtp_destination_recipient_limit = 1 smtp_minimum_delivery_slots = 1 smtp_recipient_refill_delay = 1s smtp_recipient_refill_limit = 1000 smtpd_client_connection_count_limit = 200 smtpd_client_connection_rate_limit = 0 smtpd_client_message_rate_limit = 100000 smtpd_client_new_tls_session_rate_limit = 0 smtpd_client_recipient_rate_limit = 0 smtpd_delay_open_until_valid_rcpt = no smtpd_delay_reject = no smtpd_discard_ehlo_keywords = silent-discard, dsn smtpd_milters = inet:127.0.0.1:8891 smtpd_peername_lookup = no unknown_local_recipient_reject_code = 550 what could be the issue?

  Read the article

• installing lots of perl modules

  - by Colin Pickard

  Hi, I've been landed with the job of documenting how to install a very complicated application onto a clean server. Part of the application requires a lot of perl scripts, each of which seem to require lots of different perl modules. I don't know much about perl, and I only know one way to install the required modules. This means my documentation now looks this: Type each of these commands and accept all the defaults: sudo perl -MCPAN -e 'install JSON' sudo perl -MCPAN -e 'install Date::Simple' sudo perl -MCPAN -e 'install Log::Log4perl' sudo perl -MCPAN -e 'install Email::Simple' (.... continues for 2 more pages... ) Is there any way I can do all this one line like I can with aptitude i.e. Type the following command and go get a coffee: sudo aptitude install openssh-server libapache2-mod-perl2 build-essential ... Thank you (on behalf of the long suffering people who will be reading my document) EDIT: The best way to do this is to use the packaged versions. For the modules which were not packaged for Ubuntu 10.10 I ended up with a little perl script which I found here ) #!/usr/bin/perl -w use CPANPLUS; use strict; CPANPLUS::Backend->new( conf => { prereqs => 1 } )->install( modules => [ qw( Date::Simple File::Slurp LWP::Simple MIME::Base64 MIME::Parser MIME::QuotedPrint ) ] ); This means I can put a nice one liner in my document: sudo perl installmodules.pl

  Read the article

• Squid with mikrotik router

  - by niren

  I tried to connect squid3 in my network to use high anonymity proxy. This is how my network is right now WAN LINK | ------------- ----------------------------- | Mikrotik Box | | Ubuntu Server with squid3 | ------------- ----------------------------- | / | / ---------------------- | Switch ( Cheap one ) | ---------------------- | | | Client1 Client2 Client3 etc. after this setup I changed squid.conf in Ubuntu server as http_port 8080 acl localhost src xxx.xxx.xxx.xxx(Ubuntu server IP) acl to_localhost dst xxx.xxx.xxx.xxx(Mikrotik router gateway) I assume that redirected http from Mikrotik router will be redirect again to Mikrotik router. uncomment access log /var/log/squid3/access.log add visible_hostname myname save squid.conf and restart squid3 server. Then I have added nat rule in Mikrotik router ip/firewall/nat 1. add chain=dstnat src_address=xxx.xxx.xxx.xxx(ununtu server IP) dst-port=80 protocol=tcp action=accept 2. add chain=dstnat src_address=xxx.xxx.xxx.xxx/28(LAN address) dst-port=80 protocol=tcp action=dst-nat to-address=xxx.xxx.xxx.xxx(ununtu server IP) to-port=8080 now I can not able to access internet from client1 system, If I remove these two nat rule then I can access internet. what is wrong I have made?

  Read the article

• mod_cache not working

  - by Pistos

  I have a PHP site that has many dynamically generated pages. I'm trying to turn to mod_cache to help boost performance, because in most cases, content does not change in a given day. I have configured mod_cache as best I could, following examples around the web, including the mod_cache page on apache.org. When I set LogLevel debug, I see a bit of information about the caching that is [not] happening. There are plenty of pairs of lines like this: [Fri Jun 01 17:28:18 2012] [debug] mod_cache.c(141): Adding CACHE_SAVE filter for /foo/bar [Fri Jun 01 17:28:18 2012] [debug] mod_cache.c(148): Adding CACHE_REMOVE_URL filter for /foo/bar Which is fine, because I've set CacheEnable disk /foo, to indicate that I want everything under /foo cached. I'm new to mod_cache, but my understanding about these lines is that it just means that mod_cache has acknowledged that the URL is supposed to be cached, but there are supposed to be more lines indicating that it is saving the data to cache, and then later retrieving them on subsequent hits to the same URL. I can hit the same URL till I'm blue in the face, whether with F5 refreshing, or not, or with different browsers, or different computers. It's always that pair of lines that shows in the logs, and nothing else. When I set CacheEnable disk /, then I see more activity. But I don't want to cache the entire site, and there are many, many different subpaths to the site, so I don't want to have to modify code to set no-cache headers in all the necessary places. I'll mention that mod_rewrite is in use here, rewriting /foo/bar to something like index.php?baz=/foo/bar, but my understanding is that mod_cache uses the pre-rewrite URL, not the post-rewrite URL. As far as I can tell, I have the response headers not getting in the way of caching. Here's an example from one hit: Cache-Control:must-revalidate, max-age=3600 Connection:Keep-Alive Content-Encoding:gzip Content-Length:16790 Content-Type:text/html Date:Fri, 01 Jun 2012 21:43:09 GMT Expires:Fri, 1 Jun 2012 18:43:09 -0400 Keep-Alive:timeout=15, max=100 Pragma: Server:Apache Vary:Accept-Encoding mod_cache config is as follows: CacheRoot /var/cache/apache2/ CacheDirLevels 3 CacheDirLength 2 CacheEnable disk /foo What is getting in the way of mod_cache doing its job of caching?

  Read the article

• Value of Itanium over x86_64 for Oracle Deployment

  - by Antitribu

  We are looking at a new environment to run our Oracle Database running on SUSE (potentially migrating to RedHat). Our database is approximately 100GB and performs adequately on our current hardware (x86_64) with approximately 6GB of ram allocated to it. We are growing quickly however and will require more performance shortly. Given the cost of Oracle licenses we would like to maximize the value from each license by choosing the most appropriate CPU to run the software on. The questions are: Are there substantial benefits to looking at Itanium hardware, are there any drawbacks? Is there a point where Itanium starts to scale out better? What are the long term support options for Itanium? Given the dominance of x86 would it be safer long term to stick with x86? On average what would be the performance benefit of implementing an Oracle database on Itanium over x86_64? Is this an issue at all or will other factors (IO/RAM) cap out first? If anyone can point me towards some solid documentation on comparisons between the two platforms that provides good case analysis of when to choose which I'm more than happy to accept that as an answer.

  Read the article

• gpg symmetric encryption using pipes

  - by Thomas

  I'm trying to generate keys to lock my drive (using DM-Crypt with LUKS) by pulling data from /dev/random and then encrypting that using GPG. In the guide I'm using, it suggests using the following command: dd if=/dev/random count=1 | gpg --symmetric -a >./[drive]_key.gpg If you do it without a pipe, and feed it a file, it will pop up an (n?)curses prompt for you to type in a password. However when I pipe in the data, it repeats the following message four times and sits there frozen: pinentry-curses: no LC_CTYPE known assuming UTF-8 It also says can't connect to '/root/.gnupg/S.gpg-agent': File or directory doesn't exist, however I am assuming that this doesn't have anything to do with it, since it shows up even when the input is from a file. So I guess my question boils down to this: is there a way to force gpg to accept the passphrase from the command line, or in some other way get this to work, or will I have to write the data from /dev/random to a temporary file, and then encrypt that file? (Which as far as I know should be alright due to the fact that I'm doing this on the LiveCD and haven't yet created the swap, so there should be no way for it to be written to disk.)

  Read the article

< Previous Page | 115 116 117 118 119 120 121 122 123 124 125 126  | Next Page >