Search Results

Search found 373 results on 15 pages for 'acpi'.

Page 12/15 | < Previous Page | 8 9 10 11 12 13 14 15  | Next Page >

  • 64-bit 13.10 shows 1GB less RAM than 64-bit 13.04 did

    - by kiloseven
    Multiple 64-bit versions (Kubuntu, Lubuntu and Xubuntu) once installed on my ThinkPad R60 show 3GB of RAM, not the correct 4GB of RAM. Last week with 13.04, I had 4GB of RAM (which matches the BIOS) and this week I have 3GB available. Inquiring minds want to know. Details follow: Linux R60 3.11.0-12-generic #19-Ubuntu SMP Wed Oct 9 16:20:46 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux r60 free -m reports: _ total used free shared buffers cached Mem: 3001 854 2146 0 22 486 -/+ buffers/cache: 346 2655 Swap: 0 0 0 . . . . . . lshw shows: description: Notebook product: 9459AT8 () vendor: LENOVO version: ThinkPad R60/R60i serial: redacted width: 64 bits capabilities: smbios-2.4 dmi-2.4 vsyscall32 configuration: administrator_password=disabled boot=normal chassis=notebook family=ThinkPad R60/R60i frontpanel_password=unknown keyboard_password=disabled power-on_password=disabled uuid=126E4001-48CA-11CB-9D53-B982AE0D1ABB *-core description: Motherboard product: 9459AT8 vendor: LENOVO physical id: 0 version: Not Available *-firmware description: BIOS vendor: LENOVO physical id: 0 version: 7CETC1WW (2.11 ) date: 01/09/2007 size: 144KiB capacity: 1984KiB capabilities: pci pcmcia pnp upgrade shadowing escd cdboot bootselect socketedrom edd acpi usb biosbootspecification {snip} *-memory description: System Memory physical id: 29 slot: System board or motherboard size: 4GiB *-bank:0 description: SODIMM DDR2 Synchronous physical id: 0 slot: DIMM 1 size: 2GiB width: 64 bits *-bank:1 description: SODIMM DDR2 Synchronous physical id: 1 slot: DIMM 2 size: 2GiB width: 64 bits dpkg -l linux-* returns: Desired=Unknown/Install/Remove/Purge/Hold | Status=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait/Trig-pend |/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad) ||/ Name Version Description +++-======================================-=======================================-========================================================================== un linux-doc-3.2.0 (no description available) ii linux-firmware 1.79.6 Firmware for Linux kernel drivers ii linux-generic 3.2.0.52.62 Complete Generic Linux kernel un linux-headers (no description available) un linux-headers-3 (no description available) un linux-headers-3.0 (no description available) un linux-headers-3.2.0-23 (no description available) un linux-headers-3.2.0-23-generic (no description available) ii linux-headers-3.2.0-52 3.2.0-52.78 Header files related to Linux kernel version 3.2.0 ii linux-headers-3.2.0-52-generic 3.2.0-52.78 Linux kernel headers for version 3.2.0 on 64 bit x86 SMP ii linux-headers-generic 3.2.0.52.62 Generic Linux kernel headers un linux-image (no description available) un linux-image-3.0 (no description available) ii linux-image-3.2.0-52-generic 3.2.0-52.78 Linux kernel image for version 3.2.0 on 64 bit x86 SMP ii linux-image-generic 3.2.0.52.62 Generic Linux kernel image un linux-initramfs-tool (no description available) un linux-kernel-headers (no description available) un linux-kernel-log-daemon (no description available) ii linux-libc-dev 3.2.0-52.78 Linux Kernel Headers for development un linux-restricted-common (no description available) ii linux-sound-base 1.0.25+dfsg-0ubuntu1.1 base package for ALSA and OSS sound systems un linux-source-3.2.0 (no description available) un linux-tools (no description available)

    Read the article

  • How to (un)dock IBM Thinkpad X41 from X4 Dock(ing station) successfully?

    - by nutty about natty
    I'd like to start using my docking station again; however, it still doesn't work as it should, see the following bug descriptions (with special focus on Thinkpad X41 & the X4 Dock). Given that it still doesn't work (effective April 2012), my hope is fading that it will start working all of a sudden with Precise Pangolin at the end of the month. This issue is VERY important to me and I would be MOST grateful to anyone being able to sieve through the following links (some of which are actually quite recent) and translate their meaning into reliable and concrete simple (?) steps. I've read briefly about hal and udev, and can imagine that they are somewhat related to this, see links below. I don't want to fire at random. I don't want to tinker around with bash scripts if avoidable... Problem description (more or less ;-) Pressing the undock button on a "ThinkPad X4 Dock" with a ThinkPad X40 does not cause any udev events. And the lights on the dock never change to indicate it is safe to undock. and IBM Thinkpad X41 & docking station no joy :-( ... when pressing the blue undock button on the docking station: - The screen goes blank (with backlight remaining on), - with some SSD/HDD activity; - ctrl alt del causes a shut down after ... seconds, indicating that the system itself hasn't "crashed" but is still (somewhat ?) responsive. and With recent distributions, docking and undocking should function out of the box. You can monitor this by running # udevadm monitor and when you dock or press the undock button you should see a flurry of events. There are some issues though: No event on undock. - In some cases you may not get any events on undock. This is due to the ACPI dock drivers only registering the first logical Dock port they encounter and in some rare cases there may be more then one, such as on a ThinkPad X40 with ThinkPad X4 Dock. Patches are available, and are merged in 2.6.34. Now, if patches are available and merged into 2.6.34 - why isn't (un)docking simply working / fully supported in the latest version of Natty (which to my humble understanding has surpassed kernel version 2.6.34 a while ago)? More relevant links: ThinkPad X41 Docking Station issues and [HOWTO] Run scripts for laptop lid open/close and dock/undock events and finally Symptoms corrected by the latest BIOS Update - ThinkPad X41 - (Fix) USB devices connected to UltraBase X4 or ThinkPad X4 Dock may not be recognized in Boot Menu by pressing F12 during POST. Thanks!!

    Read the article

  • Lubuntu: neither shut-down nor restart works

    - by Rantanplan
    aI have a freshly installed Lubuntu 14.04.1 (installed with forcepae option on a laptop with Pentium M processor). The only problem that I have found so far is that I cannot shut-down or restart the laptop. It always continues showing "Lubuntu" and some dots. Pressing Esc it says wait-for-state stop/waiting * Stopping rsync daemon rsync [OK] * Asking all remaining processes to terminate… [OK] * Killing all remaining processes… [fail] ModemManager [597] : <info> Caught signal, shutting down… ModemManager [597] : <info> ModemManager is shut down nm-dispatcher.action: Could not get the system bus. Make sure the message bus daemon is running! Message: Did not receive a reply. Possible causes: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken. * Deactivating swap… [OK] * Will now halt The cursor remains blinking but the only way to switch it off is to hold the power-off key pressed for some seconds. I tried sudo shutdown -h now, sudo halt and sudo poweroff resulting in the same problem. I also tried to add acpi=force in GRUB_CMDLINE_LINUX_DEFAULT="quiet splash" in /etc/default/grub and run sudo update-grub; then, using the taskbar's shot-down button lead to a direct stop of the laptop equal to holding the power-off key pressed for some seconds. Next I followed the answer http://askubuntu.com/a/202481/288322. Now, I directly receive some messages during shut-down starting wait-for-state stop/waiting * Stopping rsync daemon rsync [OK] * Asking all remaining processes to terminate… [OK] [ 240.944277] INFO: task kworker/0:2:24: block for more than 120 seconds. [ 240.944461] Tainted: G S 3.13.0-34-generic #60-Ubuntu [ 240.944623] "echo 0 > /proc/sys/kernel/hung_tasks_timeout_secs" disables this message. followed by some more similar lines and then: * Killing all remaining processes… [fail] ModemManager [576] : <info> Caught signal, shutting down… nm-dispatcher.action: Caught signal 15, shutting down... ModemManager [576] : <info> ModemManager is shut down * Deactivating swap… [OK] * Will now halt [ 600.944276] INFO: task kworker/0:2:24: block for more than 120 seconds. [ 600.944458] Tainted: G S 3.13.0-34-generic #60-Ubuntu [ 600.944619] "echo 0 > /proc/sys/kernel/hung_tasks_timeout_secs" disables this message. Then, nothing more was coming during the next 5 minutes. If you know where can I find relevant error information, I will be happy to search for them.

    Read the article

  • Ubuntu 14.04 : Lost my sound randomly tried a few commands and I think I failed

    - by Marc-Antoine Théberge
    I lost my sound the other day and I tried to delete pulseaudio then reinstall, then I tried to delete it and install alsa, It did not work and I had to reinstall everything; overall bad idea... now I can't have any sound. Should I do a fresh install? I don't know how to boot an usb drive with GRUB... Here's my sysinfo System information report, generated by Sysinfo: 2014-05-28 05:45:58 http://sourceforge.net/projects/gsysinfo SYSTEM INFORMATION Running Ubuntu Linux, the Ubuntu 14.04 (trusty) release. GNOME: 3.8.4 (Ubuntu 2014-03-17) Kernel version: 3.13.0-27-generic (#50-Ubuntu SMP Thu May 15 18:08:16 UTC 2014) GCC: 4.8 (i686-linux-gnu) Xorg: 1.15.1 (16 April 2014 01:40:08PM) (16 April 2014 01:40:08PM) Hostname: mark-laptop Uptime: 0 days 11 h 43 min CPU INFORMATION GenuineIntel, Intel(R) Atom(TM) CPU N270 @ 1.60GHz Number of CPUs: 2 CPU clock currently at 1333.000 MHz with 512 KB cache Numbering: family(6) model(28) stepping(2) Bogomips: 3192.13 Flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx constant_tsc arch_perfmon pebs bts aperfmperf pni dtes64 monitor ds_cpl est tm2 ssse3 xtpr pdcm movbe lahf_lm dtherm MEMORY INFORMATION Total memory: 2007 MB Total swap: 1953 MB STORAGE INFORMATION SCSI device - scsi0 Vendor: ATA Model: ST9160310AS HARDWARE INFORMATION MOTHERBOARD Host bridge Intel Corporation Mobile 945GSE Express Memory Controller Hub (rev 03) Subsystem: ASUSTeK Computer Inc. Device 8340 PCI bridge(s) Intel Corporation NM10/ICH7 Family PCI Express Port 1 (rev 02) (prog-if 00 [Normal decode]) Intel Corporation NM10/ICH7 Family PCI Express Port 2 (rev 02) (prog-if 00 [Normal decode]) Intel Corporation NM10/ICH7 Family PCI Express Port 4 (rev 02) (prog-if 00 [Normal decode]) Intel Corporation 82801 Mobile PCI Bridge (rev e2) (prog-if 01 [Subtractive decode]) Intel Corporation NM10/ICH7 Family PCI Express Port 1 (rev 02) (prog-if 00 [Normal decode]) Intel Corporation NM10/ICH7 Family PCI Express Port 2 (rev 02) (prog-if 00 [Normal decode]) Intel Corporation NM10/ICH7 Family PCI Express Port 4 (rev 02) (prog-if 00 [Normal decode]) Intel Corporation 82801 Mobile PCI Bridge (rev e2) (prog-if 01 [Subtractive decode]) ISA bridge Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02) Subsystem: ASUSTeK Computer Inc. Device 830f IDE interface Intel Corporation 82801GBM/GHM (ICH7-M Family) SATA Controller [IDE mode] (rev 02) (prog-if 80 [Master]) Subsystem: ASUSTeK Computer Inc. Device 830f GRAPHIC CARD VGA controller Intel Corporation Mobile 945GSE Express Integrated Graphics Controller (rev 03) (prog-if 00 [VGA controller]) Subsystem: ASUSTeK Computer Inc. Device 8340 SOUND CARD Multimedia controller Intel Corporation NM10/ICH7 Family High Definition Audio Controller (rev 02) Subsystem: ASUSTeK Computer Inc. Device 831a NETWORK Ethernet controller Qualcomm Atheros AR8121/AR8113/AR8114 Gigabit or Fast Ethernet (rev b0) Subsystem: ASUSTeK Computer Inc. Device 8324

    Read the article

  • New computer hangs on shutdown/reboot, how to troubleshoot?

    - by torbengb
    Summary: My machine hangs on shutdown/restart: all windows and the menu bar disappear but the desktop wallpaper remains, and it stays like that without disk activity forever (hours). It doesn't even show the shutdown screen (the one with the animated dots) where I could hit ESC and watch the shutdown text. How can I troubleshoot this? Details: I've just received a new nettop computer (Acer Aspire Revo 3700: CPU:Atom D525, GPU:Nvidia ION2). I've just made a clean install of Ubuntu 10.10 using the standard USB pendrive method. The machine boots okay and works OK including WLAN and audio, but the graphics are not OK. Ubuntu offered to install&activate the current recommended Nvidia driver, but the machine hangs on shutdown/restart which prevents the installation of the proper Nvidia driver. I have to cycle the power to reboot. I ran the Update Manager in the hope that the updates would fix the hang-up. At the end of the update-installation it asked to reboot - and got stuck just like before. I see no obvious cause of the freeze and I don't know if it's caused by graphics problems or anything else. The only USB attachment is a mouse/keyboard; I don't have any external storage attached; and I don't have any programs running (the machine freezes even when doing restart right after login). How can I determine what is causing the freeze? How can I fix this? I'm frankly rather disappointed because I bought this new machine in the hopes of getting the graphics to work, which failed miserably on my old machine, even though Ubuntu is supposed to be good with Nvidia. Being a fresh convert from Windows, I was hoping for a happier experience this time, so I'm very much looking forward to your suggestions! ... After posting this question, I see related questions in the right sidebar: this, this, and this. Don't know why these didn't show up while I composed by question. Those questions suggest some ACPI settings but I am not experienced enough to find/change those settings. I'll try the sudo shutdown -h now command when I get home and see if that works, then update this question. I did check the system BIOS but didn't see anything out of the ordinary.

    Read the article

  • Thinkpad brightness steps error using FN+Home/End

    - by petermolnar
    I've met the following problem: normally my T400 (Lenovo Thinkpad) has 16 steps of brightness, and Windows utilizes it correctly. After a fresh install & minor tweaks Mint 12 (which is based on 11.10 Ubuntu) I only had 6 steps which was way to few. Listing /sys/class/backlight showed 3 entried. I removed the acpi-tools package, one of the disapperared - and I now have 10 steps! Therefore I think if I can reduce the entries to 1 I'm going to have 16 steps, since the stepping will be 1 instead of 2 (or 3). /sys/class/backlight/ intel_backlight -> ../../devices/pci0000:00/0000:00:02.0/drm/card0/card0-LVDS-1/intel_backlight thinkpad_screen -> ../../devices/virtual/backlight/thinkpad_screen The problem is that I'm unable to trace back what are the configs / daemons / kernel options triggers these two. More strangely, I discovered a strange behaviour. I monitored watch -n1 "cat /sys/class/backlight/thinkpad_screen/actual_brightness" and watch -n1 "cat /sys/class/backlight/intel_backlight/actual_brightness" while changing the brightness with FN+home/end combinations from max to min. The outcome is the following: brighness intel thinkpad --------- ----- -------- MAX 2408475 7 | 1955115 5 | 1435640 3 | 1246740 1 | 1086175 0 | 1010615 6 | 859495 4 | 689485 2 v 481695 0 MIN 217235 0 brighness intel thinkpad --------- ----- -------- MIN 217235 0 | 481695 2 | 689485 4 | 859495 6 | 1010615 7 | 1086175 1 | 1246740 3 | 1435640 5 v 1955115 7 MAX 2408475 0 When stepping from MIN to MAX, there's no difference between the last 2 steps. Also, the OSD icon (Cinnamon desktop, default theme) goes from full to min in 4 steps and from full to min once again in 4 steps. So... it seems that the intel entry is working correctly, showing correct values. The thinkpad entry however twists the things and even showing incorrect values. Does anyone have any idea how to get rid of the thinkpad entry? System data: Linux Mint 12 3.0.0-16 kernel Lenovo ThinkPad T400 Cinnamon 1.4 desktop For any additional info, please tell me what do you need. EDIT I'm sorry, I forgot to mention, I added acpi_backlight=vendor to GRUB cmdline as well, this is the result of the semi-better working than the default.

    Read the article

  • Live-Ubuntu 12.04 ran fine, now stopped booting!

    - by user89743
    I've seen similar problems to this several times in the forum, but mine is a bit different, so the other posts I saw were no help to me. When I boot Ubuntu 12.04 64-bit from live-SD-card (3GB persistence) I suddenly get this error: (initramfs) mount: mounting /dev/loop0 on //filesystem.squashfs failed: Invalid argument Can not mount /dev/loop/0 (/cdrom/casper/filesystem.squashfs) on //filesystem.squashfs (it says I can type "help" for commands, but I don't know anything about how to go from there, totally new to linux) The reason I say my case is different is because my Ubuntu worked fine for over a week, even pretty fast, and now this problem happened. Before that I used to run my live ubuntu from USB sticks but that was slower (especially when booting which took 15 minutes from USB stick!). Also I kept getting the same above problem after a while when booting and had to re-create a live USB linux several times. Installing on harddrive is not an option because my harddrive has physical damage and getting a replacement will take a while, therefore I can only use live-USB or live-SD-card Ubuntu. As I said I used Ubuntu without problems for more than a week, before that as well for several weeks on USB sticks, but the above problem occured sooner or later. This time I paid attention to when it happened: I was rebooting my computer (HP 620 laptop, 4 GB RAM, 64 bit system) from SD flash card and when I was booting I selected F6 and then the first option "no acpi" or something like that...I had used it before and noticed it slowed down the time it took Linux to use. This time it caused this error. Now even when I boot normally/default I get this error. Now I'm accessing Ubuntu from my USB stick without persistence file, when I check my SD card, all the files mentioned in the error message are there and the filesystem.squashfs is 691.2 MB so nothing seems to have been deleted by accident. (I have already made many changes/downloaded programs to my SD card persistent Ubuntu and would hope to loose them, since downloading is expensive for me, and since the problem seems to re-occur...) Can anyone help me, preferably without having to create another startup disk on my SD card? I'm totally new to this. Sorry for the long posts, just didn't know what info is relevant and what isnt! Kon

    Read the article

  • vga_switcheroo and Intel HD 3000 on Ubuntu 12.04

    - by Ikalou
    I'm trying to get vga_switcheroo to enable my integrated Intel HD 3000 instead of my ATI card. My problem is that there is no vgaswitcheroo directory in /sys/kernel/debug/ on my system. > grep -i switcheroo /boot/config-3.2.0-26-generic CONFIG_VGA_SWITCHEROO=y And yet: > sudo ls /sys/kernel/debug/ acpi bdi bluetooth dri extfrag gpio ieee80211 kprobes mce mmc0 regmap regulator sched_features suspend_stats tracing usb wakeup_sources x86 I am NOT using the fglrx driver. Here is the output of lspci; glxinfo | grep renderer: 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) 00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09) 00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04) 00:19.0 Ethernet controller: Intel Corporation 82579LM Gigabit Network Connection (rev 04) 00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 04) 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 04) 00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b4) 00:1c.1 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 (rev b4) 00:1c.2 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 3 (rev b4) 00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b4) 00:1c.7 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 8 (rev b4) 00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 04) 00:1f.0 ISA bridge: Intel Corporation QM67 Express Chipset Family LPC Controller (rev 04) 00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 04) 01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Seymour [Radeon HD 6400M Series] 01:00.1 Audio device: Advanced Micro Devices [AMD] nee ATI Caicos HDMI Audio [Radeon HD 6400 Series] 24:00.0 FireWire (IEEE 1394): JMicron Technology Corp. IEEE 1394 Host Controller (rev 30) 24:00.1 System peripheral: JMicron Technology Corp. SD/MMC Host Controller (rev 30) 24:00.2 SD Host controller: JMicron Technology Corp. Standard SD Host Controller (rev 30) 25:00.0 Network controller: Intel Corporation Centrino Advanced-N 6205 (rev 34) 26:00.0 USB controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 04) OpenGL renderer string: Gallium 0.4 on AMD CAICOS Both xserver-xorg-video-intel and xserver-xorg-video-radeon packages are installed. I know there are tons of posts about hybrid-graphics already but I couldn't quite find a solution to my problem. Does anyone know why is /sys/kernel/debug/vgaswitcheroo not showing?

    Read the article

  • Can my machine run Ubuntu( kubuntu | xubuntu | mint ) 12.04 WELL?

    - by Steve
    I have a 9 year old computer packing the hardware listed below. My question is, can I run 12.04 ( Ubuntu, Kubuntu, MINT or Xubuntu ) WELL? I was running Ubuntu 10.10 and I upgraded to 12.04 by going through each release via the update manager: 11.04 - 11.10 -12.04 During the installation process for 12.04 I saw an error message that there was an error installing and setting up part of the kernel. Later, when I tried installing a package in synaptic, I got another error message mentioning the kernel. When I rebooted, I got told somehting about my video and graphics was not configured properly and that I would have to do it manually ( like I know ). It gave me the option to enter the system in low graphics mode, but it just hanged. I had an old livecd of Xubuntu 10.10 around so I used that to get into my computer and copy data over to an external hard drive. I think tried to install Xubuntu 10.10 from the livecd, with the option "download updates" checked. The install process moved along a bit, then halted for about 5 hours. I rebooted my machine and tried the Xubuntu 10.10 installer WITHOUT the option to "download updates". The install completed in about 15 minutes. So, all of that is making me wonder if there is someting about 12.04 that does not like my hardware. I'm willing to try again, but only if I know I will not have to spend hours just to get to an error message and a hosed up system like I did last night. I also think I have a lot more RAM than is being reported in the output below. I had extra ram installed last year. I'm not good with the command line readouts, but there seems like there should be a lot more. I wasn't thrilled with Unity. I am willing to try Kubuntu 12.04. Will I run into the same problems? What is the highest version of a *ubuntu can I upgrade to? Thanks CPU Model: Intel(R) Pentium(R) 4 CPU 2.53GHz Frequency: 2533.223 MHz L2 Cache: 512 KB Bogomips: 5066.44 Numbering: family(15) model(2) stepping(7) Flags: fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe up pebs bts cid RAM ~$ free -mt total used free shared buffers cached Mem: 1506 891 615 0 91 521 -/+ buffers/cache: 278 1227 Swap: 1609 0 1609 Total: 3116 891 2225 Video Card 01:00.0 VGA compatible controller: nVidia Corporation NV18 [GeForce4 MX 440 AGP 8x] (rev a2) (prog-if 00 [VGA controller]) Subsystem: ASUSTeK Computer Inc. V9180 Magic Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 16 Memory at fd000000 (32-bit, non-prefetchable) [size=16M] Memory at f0000000 (32-bit, prefetchable) [size=64M] Expansion ROM at fe9e0000 [disabled] [size=128K] Kernel driver in use: nouveau Kernel modules: nouveau, nvidiafb Motherboard Intel 845PE ATX 533FSB DDR333 USB2

    Read the article

  • RHEL hangs after starting virt-who succesfully

    - by Nick
    Idea #1: Is there a way to REPAIR an RHEL 6.2 installation? During the start-up procedure, after a recent forced reboot, my Linux machine (RHEL 6.2) hangs right after successfully starting virt-who. I can use login screens (Alt + F2/F3...) in text mode. I am clueless -- how can I find out what is the next step in the startup sequence? That step is most likely what is causing it to hang. These are the last lines saved to /var/log/boot.log: Starting RPC idmapd: [60G[[0;32m OK [0;39m] Starting cups: [60G[[0;32m OK [0;39m] Starting acpi daemon: [60G[[0;32m OK [0;39m] Starting HAL daemon: [60G[[0;32m OK [0;39m] Starting PC/SC smart card daemon (pcscd): [60G[[0;32m OK [0;39m] Retrigger failed udev events[60G[[0;32m OK [0;39m] Loading autofs4: [60G[[0;32m OK [0;39m] Starting automount: [60G[[0;32m OK [0;39m] Enabling Bluetooth devices: Starting sshd: [60G[[0;32m OK [0;39m] Starting ntpd: [60G[[0;32m OK [0;39m] Starting mysqld: [60G[[0;32m OK [0;39m] Starting postfix: [60G[[0;32m OK [0;39m] Starting abrt daemon: [60G[[0;32m OK [0;39m] Starting ksm: [60G[[0;32m OK [0;39m] Starting ksmtuned: [60G[[0;32m OK [0;39m] Starting Qpid AMQP daemon: [60G[[0;32m OK [0;39m] Starting crond: [60G[[0;32m OK [0;39m] Starting atd: [60G[[0;32m OK [0;39m] Starting libvirtd daemon: [60G[[0;32m OK [0;39m] Starting rhsmcertd 240 1440[60G[[0;32m OK [0;39m] Starting virt-who: [60G[[0;32m OK [0;39m]

    Read the article

  • Remote RIB iLO on Proliant via RIBCL

    - by Wudang
    I'm trying to automate a process for our Ops. The process requires that some windows servers running on blades are shut down, left down for a few hours, the restarted when some other processes complete. This is done by an op logging on to each blade's iLO web interface to stop and start. I've been trying to automate this with HP's cpqlocfg program with partial success. I can issue the GET_POWER, GET_USER_INFO, etc commands but SET_HOST_POWER fails in a specific way. Using the cpqlocfg GET_EVENTLOG command I can see the events XML login and the power comand being issued from the iLO interface but then nothing happens. Some hints from googling suggest ACPI isn't configured properly but I can't find any hits on how to verify this. Am I even using the right command? There's also a few other options like PRESS_PWR_BUTTON etc. Problem is I have nowhere to test this, all I can do at the moment is give a script to ops and ask them to try it as 4am on a Sunday when they try the proc. The shutdown is trivial as I can use the windows "shutdown" command, it's the power on that I need help on. Anyone done this? I'd tag this "rib ribcl ilo" but lack the rep points, sorry.

    Read the article

  • Xen HVM networking wont work

    - by Nathan
    I'm trying to get a Xen HVM network working using route however I am failing. Xen PV works fine using Ubuntu but when installing Ubuntu on HVM it fails to pick up the network. I'll let you know now that I'm not that experienced with Xen so I would appreciate any help. vm104 is the HVM thats causing me the problems, here is the configs that I believe should help resolve the problem. [root@eros vm104]# cat vm104.cfg import os, re arch = os.uname()[4] if re.search('64', arch): arch_libdir = 'lib64' else: arch_libdir = 'lib' kernel = '/usr/lib/xen/boot/hvmloader' builder = 'hvm' memory = 6000 shadow_memory = '8' cpu_weight = 256 name = 'vm104' vif = ['type=ioemu, ip=85.25.x.y, vifname=vifvm104.0, mac=00:16:3e:52:3d:fe, bridge=xenbr0'] acpi = 1 apic = 1 vnc = 1 vcpus = 4 vncdisplay = 3 vncviewer = 0 vncconsole = 1 vnclisten = '217.118.x.y' vncpasswd = 'kCfb5S4tE7' serial = 'pty' disk = ['phy:/dev/vpsvg/vm104_img,hda,w', 'file:/home/solusvm/xen/iso/Windows-Server-2008-RC2.iso,hdc:cdrom,r'] device_model = '/usr/' + arch_libdir + '/xen/bin/qemu-dm' boot = 'cd' sdl = '0' usbdevice = 'tablet' pae=1 [root@eros /]# cat /etc/xen/xend-config.sxp | egrep -v "(^#.*|^$)" (xend-unix-server yes) (xend-unix-path /var/lib/xend/xend-socket) (xend-relocation-hosts-allow '^localhost$ ^localhost\\.localdomain$') (network-script network-route) (vif-script vif-route) (network-script 'network-route netdev=eth0') (dom0-min-mem 256) (dom0-cpus 0) (vnc-listen '0.0.0.0') (vncpasswd '') (keymap 'en-us') The Windows install will not pick up the network - I've tried setting the IP manually by using the Xen servers IP as the gateway and setting the main IP in Windows but no luck. If anyone needs any more information let me know and I appreciate any input!

    Read the article

  • Disabling CPU management

    - by Tiffany Walker
    If I add the following processor.max_cstate=0 to the kernel command line for boot up, does that disable all CPU power management and throttling? I also found: http://www.experts-exchange.com/OS/Linux/Administration/A_3492-Avoiding-CPU-speed-scaling-in-modern-Linux-distributions-Running-CPU-at-full-speed-Tips.html The link talks of Change CPU governor from 'ondemand' to 'performance' for all CPUs/cores and disabling kondemand from kernel. Server is for web hosting UPDATES: 2.6.32-379.1.1.lve1.1.7.6.el6.x86_64 #1 SMP Sat Aug 4 09:56:37 EDT 2012 x86_64 x86_64 x86_64 GNU/Linux . # dmidecode 2.11 SMBIOS 2.6 present. 74 structures occupying 2878 bytes. Table at 0x0009F000. Handle 0x0000, DMI type 0, 24 bytes BIOS Information Vendor: American Megatrends Inc. Version: 1.0c Release Date: 05/27/2010 Address: 0xF0000 Runtime Size: 64 kB ROM Size: 4096 kB Characteristics: ISA is supported PCI is supported PNP is supported BIOS is upgradeable BIOS shadowing is allowed ESCD support is available Boot from CD is supported Selectable boot is supported BIOS ROM is socketed EDD is supported 5.25"/1.2 MB floppy services are supported (int 13h) 3.5"/720 kB floppy services are supported (int 13h) 3.5"/2.88 MB floppy services are supported (int 13h) Print screen service is supported (int 5h) 8042 keyboard services are supported (int 9h) Serial services are supported (int 14h) Printer services are supported (int 17h) CGA/mono video services are supported (int 10h) ACPI is supported USB legacy is supported LS-120 boot is supported ATAPI Zip drive boot is supported BIOS boot specification is supported Targeted content distribution is supported BIOS Revision: 8.16 Handle 0x0001, DMI type 1, 27 bytes System Information Manufacturer: Supermicro Product Name: X8SIE Version: 0123456789 Serial Number: 0123456789 UUID: 49434D53-0200-9033-2500-33902500D52C Wake-up Type: Power Switch SKU Number: To Be Filled By O.E.M. Family: To Be Filled By O.E.M. Handle 0x0002, DMI type 2, 15 bytes Base Board Information Manufacturer: Supermicro Product Name: X8SIE Version: 0123456789 Serial Number: VM11S61561 Asset Tag: To Be Filled By O.E.M. Features: Board is a hosting board Board is replaceable Location In Chassis: To Be Filled By O.E.M. Chassis Handle: 0x0003 Type: Motherboard Contained Object Handles: 0 Handle 0x0003, DMI type 3, 21 bytes Chassis Information Manufacturer: Supermicro Type: Sealed-case PC Lock: Not Present Version: 0123456789 Serial Number: 0123456789 Asset Tag: To Be Filled By O.E.M. Boot-up State: Safe Power Supply State: Safe Thermal State: Safe Security Status: None OEM Information: 0x00000000 Height: Unspecified Number Of Power Cords: 1 Contained Elements: 0

    Read the article

  • Munin node not listing any plugins on new Fedora 14 installation

    - by Dave Forgac
    I have just installed munin-node from the base repo on Fedora 14 and then started it. I found that my munin server is not able to collect data from this node so I tried connecting via telnet to test. When connecting via telnet I see that no plugins are listed: [dave@host ~]# telnet localhost 4949 Trying 127.0.0.1... Connected to localhost. Escape character is '^]'. # munin node at host.example.com list quit Connection closed by foreign host. [dave@host ~]# I did not modify anything after the installation. The munin-node.conf is allowing connections from 127.0.0.1 and the default set of plugins in /etc/munin/plugins/ are symlinked to the plugins in /usr/share/munin/plugins/. Here is the working output of the telnet test of the 'list' command should look like (this is on a Fedora 13 host): [dave@www ~]$ telnet localhost 4949 Trying 127.0.0.1... Connected to localhost. Escape character is '^]'. # munin node at www.example.com list apache_accesses apache_processes apache_volume cpu df df_inode entropy forks fw_packets if_err_eth0 if_err_eth1 if_eth0 if_eth1 interrupts iostat iostat_ios irqstats load memory munin_stats mysql_ mysql_bytes mysql_innodb mysql_queries mysql_slowqueries mysql_threads netstat open_files open_inodes postfix_mailqueue postfix_mailvolume proc_pri processes swap threads uptime users vmstat yum quit Connection closed by foreign host. [dave@www ~]$ Edited to show output of munin-node-configure: [root@host ~]# munin-node-configure Plugin | Used | Extra information ------ | ---- | ----------------- acpi | no | amavis | no | ... http_loadtime | no | if_ | yes | eth1 eth0 if_err_ | yes | eth0 eth1 ifx_concurrent_sessions_ | no | interrupts | yes | ... uptime | yes | users | yes | varnish_ | no | vserver_resources | no | yum | yes | zimbra_ | no | Any suggestions on what to check next?

    Read the article

  • HTPC/DVR computer won't go into standby

    - by Robert
    When I select Start-Turn off computer-Standby the 'turn off computer' option window closes, and then nothing else happens. I can start new applications, and Windows acts like I never selected standby. I ran it for several hours after that. If I have a TV program scheduled to record when I select standby I get a window (the Pinnacle TV software) asking if I'm sure, there are programs scheduled to record - and the computer just keeps running after I select yes, never going into standby. I added that detail as it shows the standby process is starting. [This problem also happens if a TV program is not scheduled, so the scheduler task in not running/in memory. This problem happens regardless of whether I'm not watching TV. This problem happens regardless of whether Media Center is running (it usually isn't, I'm using Pinnacle to watch TV).] I looked at "How to troubleshoot hibernation and standby issues in Windows XP" http://support.microsoft.com/kb/907477 - ACPI is enabled, and "standby" is an option in "Power Options Properties." So it appears to be setup correctly. Windows XP SP3 Media Center Edition, all current updates installed.

    Read the article

  • Chmod 644 on /etc/ any way to fix?

    - by DazSlayer
    I tried to tab complete something and I guess it wasnt there. I know you are not supposed to set the permissions to /etc/ like that, but my permissions seem to be all messed up. whoami prints out cannot find name for user ID 1002 and I cannot cd into /etc/ anymore. passwd and shadow use 640 and 644 so I am not sure why this is a problem. Regardless, is there any way to fix this? The command run was sudo chmod 644 /etc/ I have no name!@vpn-server:/$ whoami whoami: cannot find name for user ID 1002 I have no name!@vpn-server:/$ cd etc bash: cd: etc: Permission denied I have no name!@vpn-server:/$ ls -al etc d????????? ? ? ? ? ? . d????????? ? ? ? ? ? .. d????????? ? ? ? ? ? acpi -????????? ? ? ? ? ? adduser.conf I have no name!@vpn-server:/$ sudo su sudo: can't open /etc/sudoers: Permission denied

    Read the article

  • Overclock Failed

    - by John
    This morning when I tried to turn on my computer, the monitor would not display anything. The computer is on, but no UI on the monitor and no beep. I turned off the computer and turn it back on again. This time, the computer was on for about 2 seconds and automatically turned itself off for about 2 second and automatically turned itself back on. This happened two times without the monitor displaying any UI. On the third try, the computer did the same thing but when it turned itself back on, the monitor displayed this: American Megatrends Asus P8P67 Le ACPI bios Revision 1011 CPU Intel Core i5 2500K CPU @ 3.30GHz Speed: 3300MHz Total Memory 4096 MB (DDR3-1333) USB Devices Total: 0 Drive, 1 Keyboard, 1 Mouse, 2 Hubs Detected ATA/ATAPI Deivces SATA6G_2 Hitachi HDs821010CLA 332 SATA3G_1 Corsair force 3 SSD SATA3G_2 HL-DT-ST DB-RE UH12CS28 Overclocking Failed! Please enter setup to reconfigure your system. Press F1 to Run Setup. After I pressed F1, it went into the Asus EF1 Bios Utility. I couldn't do anything in there so I just exited. After which, the computer auto turned off and on again and I was able to use the PC like regular. This has never happened to this computer before and the day before, nothing seemed wrong, just regular use and some gaming.

    Read the article

  • Setting up Windows SBS 2008 network on Xen

    - by samyboy
    I'm trying to install a Windows SBS 2008 server in a Xen environment. The OS is booting fine. Unfortunately I can't figure out how to set up the network settings. Dom0 is a Debian Lenny hosting around 10 virtual servers. Here are the settings I'm using in the hosted Windows SBS: IP address: 10.20.0.8 Network mask: 255.255.0.0 Gateway: 10.20.0.1 Note that during the installation stage, Windows set the net mask at 255.255.255.0 without letting me choose. Gross. Windows SBS tells me I have a "limited connection". I can't ping the gateway nor any other IP except localhost and it's own IP (10.20.0.8). Here is the Xen config file: kernel = '/usr/lib/xen-3.2-1/boot/hvmloader' builder = 'hvm' memory = '4096' device_model='/usr/lib/xen-3.2-1/bin/qemu-dm' acpi=1 apic=1 pae=1 vcpus=1 name = 'winexchange' # Disks disk = [ 'phy:/dev/wnghosts/exchange-disk,ioemu:hda,w', 'file:/mnt/freespace/ISO/DVD1_Installation.iso,ioemu:hdc:cdrom,r' ] # Networking vif = [ 'mac=00:16:3E:0A:D0:1B, type=ioemu, bridge=xenbr0'] # video stdvga=0 serial='pty' ne2000=0 # Behaviour boot='c' sdl=0 # VNC vfb = [ 'type=vnc' ] vnc=1 vncdisplay=1 vncunused=1 usbdevice='tablet' This config is working with others Windows XP domU's. I tried to change the ne2000 values with 0 and 1 with no effect. I am far from having good Windows administration skills so I guess I definitely need some help on this case. Thanks.

    Read the article

  • lm-sensors - always returns 32 degrees (celsius) for temperature

    - by mopoke
    On my VIA EPIA motherboard (using VIA VT8231 ISA bridge), I get strange output for the lm-sensors temperature reading. It always returns 32 degrees (celsius). I have previously had correct output for temperature (my munin graphs show temperatures typically in the range of 50 to 60 degrees. I've tried uninstalling (and purging) the lm-sensors package, have re-run sensors-detect a number of times and rebooted but nothing seems to change the output. I am running Ubuntu Karmic Koala (9.10). Anyone got any bright ideas on what I might have missed? uname -a: Linux george 2.6.31-16-386 #53-Ubuntu SMP Tue Dec 8 06:39:34 UTC 2009 i686 GNU/Linux cpuinfo: processor : 0 vendor_id : CentaurHauls cpu family : 6 model : 7 model name : VIA Samuel 2 stepping : 3 cpu MHz : 399.000 cache size : 64 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 1 wp : yes flags : fpu de tsc msr cx8 mtrr pge mmx 3dnow up bogomips : 800.04 clflush size : 32 power management: lspci: 00:00.0 Host bridge: VIA Technologies, Inc. VT8601 [Apollo ProMedia] (rev 05) 00:01.0 PCI bridge: VIA Technologies, Inc. VT8601 [Apollo ProMedia AGP] 00:11.0 ISA bridge: VIA Technologies, Inc. VT8231 [PCI-to-ISA Bridge] (rev 10) 00:11.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) 00:11.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 1e) 00:11.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 1e) 00:11.4 Bridge: VIA Technologies, Inc. VT8235 ACPI (rev 10) 00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT82C686 AC97 Audio Controller (rev 40) 00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 51) 01:00.0 VGA compatible controller: Trident Microsystems CyberBlade/i1 (rev 6a) sensors: acpitz-virtual-0 Adapter: Virtual device temp1: +32.0°C (crit = +60.0°C)

    Read the article

  • I/O APIC on Virtualbox

    - by RidDeBakTiYar
    I'm trying to use the PIT to do APIC timer calibration, and I want to use the PIT through I/O APIC instead of PIC. On Bochs I get interrupts from the PIT at the asked frequency from the I/O APIC, while on Virtualbox I can't receive a single interrupt. It must be an I/O APIC configuration problem because as I unmask the first PIC entry, the IRQ fires. However that's not what I want. Can you imagine any possible condition that wouldn't make Virtualbox fire the IRQ? I'm not assuming single I/O APIC configuration (even though Virtualbox has only 1). I'm not assuming identity mappings between ISA IRQs and I/O APIC GSIs (using ACPI MADT table to get I/O APIC base address and Int override). I'm setting the Trigger Mode and Polarity bits correctly (on Virtualbox they are set as '00 - default' which means edge high right?). I'm putting the BSP APIC ID into the Destination field (using Physical destination) and vector 0x20. Being the BSP APIC ID 0 on Virtualbox, it ends up with 0x0000000000000020 written to the IOREDTBL. And, just in case I'm getting the wrong values from the Interrupt Override descriptor, I'm setting this value to all the IOREDTBL entries (I know this is very very bad, and it wont be kept as I understand what's going on). The only thing I didn't check out is Local APIC configuration. Actually I'm not writing any value to the BSP LAPIC. Just reading the APIC ID and using it to boot APs through IPIs. And obviously I'm setting bit 11 in the IA32_APIC_BASE MSR to enable the LAPIC. Any ideas? Thanks in advance.

    Read the article

  • TV won't go into standby

    - by Robert
    When I select Start-Turn off computer-Standby the 'turn off computer' option window closes, and then nothing else happens. I can start new applications, and Windows acts like I never selected standby. I ran it for several hours after that. If I have a TV program scheduled to record when I select standby I get a window (the Pinnacle TV software) asking if I'm sure, there are programs scheduled to record - and the computer just keeps running after I select yes, never going into standby. I added that detail as it shows the standby process is starting. [This problem also happens if a TV program is not scheduled, so the scheduler task in not running/in memory. This problem happens regardless of whether I'm not watching TV. This problem happens regardless of whether Media Center is running (it usually isn't, I'm using Pinnacle to watch TV).] I looked at "How to troubleshoot hibernation and standby issues in Windows XP" http://support.microsoft.com/kb/907477 - ACPI is enabled, and "standby" is an option in "Power Options Properties." So it appears to be setup correctly. Windows XP SP3 Media Center Edition, all current updates installed.

    Read the article

  • Can't set screen brightness in Gentoo system

    - by Real Yang
    My system: Linux gentoo 3.10.7-gentoo-r1 VGA compatible controller: NVIDIA Corporation GT216M [GeForce GT 240M] (rev a2) output of xbacklight: No outputs have backlight property output of xrandr: xrandr: Failed to get size of gamma for output default Screen 0: minimum 640 x 480, current 1280 x 720, maximum 1280 x 768 default connected 1280x720+0+0 0mm x 0mm 1280x720 0.0* 1024x768 61.0 800x600 61.0 640x480 60.0 1280x768 0.0 output of ls /proc/acpi: button/ event When I'm in kernel 3.8.13, I can change my brightness using xbacklight. I compiled 3.10.7-r1 using genkernel all. Before the upgrade I did get a notice of "compatible issues for Nvdia users" from emerge but I still don't know the details. It there anyway to let me set the brightness? Then i found a ebuild app-laptop/nvdiabl-0.81 and tried to emerege nvidabl, I got this message: Your kernel does not support FB_BACKLIGHT. To enable you it you can enable any frame buffer with backlight control or nouveau. Note that you cannot use FB_NVIDIA with nvidia's proprietary driver Please check to make sure these options are set correctly. Failure to do so may cause unexpected problems. Once you have satisfied these options, please try merging this package again. ERROR: app-laptop/nvidiabl-0.81::gentoo failed (pretend phase): Incorrect kernel configuration options Call stack: ebuild.sh, line 93: Called pkg_pretend nvidiabl-0.81.ebuild, line 31: Called linux-mod_pkg_setup linux-mod.eclass, line 559: Called linux-info_pkg_setup linux-info.eclass, line 911: Called check_extra_config linux-info.eclass, line 805: Called die The specific snippet of code: die "Incorrect kernel configuration options" [SOLVED] I enter the menuconfig again and check the Device Drivers -> Graphics support -> Support for frame buffer devices, then i found this: <*> nVidia Framebuffer Support [*] Support for backlight control (NEW) What can i say. Recompiling...

    Read the article

  • Computer won't go into standby

    - by Robert
    When I select Start-Turn off computer-Standby the 'turn off computer' option window closes, and then nothing else happens. I can start new applications, and Windows acts like I never selected standby. I ran it for several hours after that. If I have a TV program scheduled to record when I select standby I get a window (the Pinnacle TV software) asking if I'm sure, there are programs scheduled to record - and the computer just keeps running after I select yes, never going into standby. I added that detail as it shows the standby process is starting. [This problem also happens if a TV program is not scheduled, so the scheduler task in not running/in memory. This problem happens regardless of whether I'm not watching TV. This problem happens regardless of whether Media Center is running (it usually isn't, I'm using Pinnacle to watch TV).] I looked at "How to troubleshoot hibernation and standby issues in Windows XP" http://support.microsoft.com/kb/907477 - ACPI is enabled, and "standby" is an option in "Power Options Properties." So it appears to be setup correctly. Windows XP SP3 Media Center Edition, all current updates installed.

    Read the article

  • Xen Windows Guest spawn doesn't spawn a vnc display

    - by Henrik P. Hessel
    I'm using this HVM File to create a new guest kernel = "/usr/lib/xen-3.2-1/boot/hvmloader" builder='hvm' memory = 4096 # Should be at least 2KB per MB of domain memory, plus a few MB per vcpu. shadow_memory = 64 name = "hessel-windows2008" vif = [ 'ip=188.40.xx.xx,mac=00:16:3E:C1:8F:CE' ] acpi = 1 apic = 1 disk = [ 'file:/home/xen/disks/hessel/win2008/win2008.img,hda,w', 'file:/home/xen/isopool/win2008_32.iso,hdc:cdrom,r' ] device_model = '/usr/lib/xen/bin/qemu-dm' #----------------------------------------------------------------------------- # boot on floppy (a), hard disk (c) or CD-ROM (d) # default: hard disk, cd-rom, floppy boot="dc" sdl=0 vnc=1 vncdisplay=1 vnclisten="0.0.0.0" vncconsole=1 vncpasswd='howtoforge' stdvga=0 serial='pty' usbdevice='tablet' The guest is created without an error. But no vnc display is created. Any ideas, how to fix that? prometheus:~# netstat -ant Active Internet connections (servers and established) Proto Recv-Q Send-Q Local Address Foreign Address State tcp 0 0 127.0.0.1:615 0.0.0.0:* LISTEN tcp 0 0 0.0.0.0:111 0.0.0.0:* LISTEN tcp 0 0 0.0.0.0:8080 0.0.0.0:* LISTEN tcp 0 0 0.0.0.0:53 0.0.0.0:* LISTEN tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN tcp 0 0 127.0.0.1:6010 0.0.0.0:* LISTEN tcp 0 232 188.40.xx.xx:8080 195.36.75.26:54032 ESTABLISHED tcp 0 0 188.40.xx.xx:8080 195.36.75.26:53085 ESTABLISHED tcp6 0 0 :::8080 :::* LISTEN tcp6 0 0 :::53 :::* LISTEN tcp6 0 0 :::22 :::* LISTEN tcp6 0 0 ::1:6010 :::* LISTEN

    Read the article

  • No audio in my ubuntu system

    - by hap497
    Hi, I am running ubuntu 9.10. But there is no sound in my environment. When I go to System-Preference, there is no 'sound' entry there. $ aplay -l **** List of PLAYBACK Hardware Devices **** card 0: I82801AAICH [Intel 82801AA-ICH], device 0: Intel ICH [Intel 82801AA-ICH] Subdevices: 1/1 Subdevice #0: subdevice #0 $ lsmod Module Size Used by usb_storage 52576 3 binfmt_misc 8356 1 vboxvfs 34620 0 vboxvideo 1884 1 drm 159584 2 vboxvideo agpgart 34988 1 drm snd_intel8x0 30168 2 snd_ac97_codec 101216 1 snd_intel8x0 ac97_bus 1532 1 snd_ac97_codec snd_pcm_oss 37920 0 snd_mixer_oss 16028 1 snd_pcm_oss snd_pcm 75296 3 snd_intel8x0,snd_ac97_codec,snd_pcm_oss snd_seq_dummy 2656 0 snd_seq_oss 28576 0 iptable_filter 3100 0 snd_seq_midi 6432 0 ip_tables 11692 1 iptable_filter x_tables 16544 1 ip_tables snd_rawmidi 22208 1 snd_seq_midi snd_seq_midi_event 6940 2 snd_seq_oss,snd_seq_midi ppdev 6688 0 snd_seq 50224 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_mid i_event snd_timer 22276 2 snd_pcm,snd_seq snd_seq_device 6920 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi ,snd_seq psmouse 56500 0 serio_raw 5280 0 snd 59204 14 snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_ oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_ti mer,snd_seq_device i2c_piix4 9932 0 parport_pc 31940 0 soundcore 7264 1 snd snd_page_alloc 9156 2 snd_intel8x0,snd_pcm vboxguest 143836 7 vboxvfs lp 8964 0 parport 35340 3 ppdev,parport_pc,lp pcnet32 32644 0 mii 5212 1 pcnet32 floppy 54916 0 ~:987:2$ lspci 00:00.0 Host bridge: Intel Corporation 440FX - 82441FX PMC [Natoma] (rev 02) 00:01.0 ISA bridge: Intel Corporation 82371SB PIIX3 ISA [Natoma/Triton II] 00:01.1 IDE interface: Intel Corporation 82371AB/EB/MB PIIX4 IDE (rev 01) 00:02.0 VGA compatible controller: InnoTek Systemberatung GmbH VirtualBox Graphics Adapter 00:03.0 Ethernet controller: Advanced Micro Devices [AMD] 79c970 [PCnet32 LANCE] (rev 40) 00:04.0 System peripheral: InnoTek Systemberatung GmbH VirtualBox Guest Service 00:05.0 Multimedia audio controller: Intel Corporation 82801AA AC'97 Audio Controller (rev 01) 00:06.0 USB Controller: Apple Computer Inc. KeyLargo/Intrepid USB 00:07.0 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ACPI (rev 0 00:0b.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller ~:988:3$

    Read the article

< Previous Page | 8 9 10 11 12 13 14 15  | Next Page >