Search Results

Search found 1617 results on 65 pages for 'digital'.

Page 12/65 | < Previous Page | 8 9 10 11 12 13 14 15 16 17 18 19  | Next Page >

  • In a digital photo, how can I detect if a mountain is obscured by clouds?

    - by Gavin Brock
    The problem I have a collection of digital photos of a mountain in Japan. However the mountain is often obscured by clouds or fog. What techniques can I use to detect that the mountain is visible in the image? I am currently using Perl with the Imager module, but open to alternatives. All the images are taken from the exact same position - these are some samples. My naïve solution I started by taking several horizontal pixel samples of the mountain cone and comparing the brightness values to other samples from the sky. This worked well for differentiating good image 1 and bad image 2. However in the autumn it snowed and the mountain became brighter than the sky, like image 3, and my simple brightness test started to fail. Image 4 is an example of an edge case. I would classify this as a good image since some of the mountain is clearly visible. UPDATE 1 Thank you for the suggestions - I am happy you all vastly over-estimated my competence. Based on the answers, I have started trying the ImageMagick edge-detect transform, which gives me a much simpler image to analyze. convert sample.jpg -edge 1 edge.jpg I assume I should use some kind of masking to get rid of the trees and most of the clouds. Once I have the masked image, what is the best way to compare the similarity to a 'good' image? I guess the "compare" command suited for this job? How do I get a numeric 'similarity' value from this?

    Read the article

  • Thank you Geeks With Blogs for letting me join your community!

    - by GreeNTUG
    First, a link to the blog I can no longer edit because Office Live blew away my digital identity and so I can no longer log into it (the source of a loooong blog about protecting your digital identity sometime when I have more time and after it has played out to the end) http://greentug.spaces.live.com/ The following are the communities I participate in: Green & Sustainability.  I run a virtual user group on Green and Sustainability as it relates to developers and software architects.  It was located at greentug.groups.live.com, and we will need to find a new digital location for it, because I am locked out of that site as well. BizSpark Tampa Bay:  I run a BizSpark group for Microsoft technologists (meetup.com, search for BizSpark Tampa Bay) and speak at Code Camps about "No Better Time to Start Your Own Tech Business".  The meetup group facilitates a balanced presentation that is respectful to anyone wanting to start their own business, whether part-time or full-time, whether micro (just you), sustainable (grow to 2-25-ish, self-funded), high growth (get venture capital or other funding, grow it, sell it within 5 years, do it again), or hybrid (the new model going forward).  It is an "action" group, with assignments and homework if you want to get the most out of it.   At the end of a year you will either have your business on the path to where you want it to be, or you will know the steps you need to do to get it there. Women in Technology Have been participating in the Women in Technology community since 2008, my main interests in this area are mentoring women in the workplace to have them believe they can become geeks and double their income, and to mentor them with respect to starting and running their own business. Access 2010/SharePoint 2010.  This is a game-changer with respect to the Access community (the ap both devs and IT Pros love to hate, the other a-word that's not a fruit).  I conducted Lunch n Learns and Brunch n Learns around this topic before the Office 2010/SharePoint 2010 launch, and spoke on the topic at SharePoint Saturday Tampa in Nov 2009. Interested in learning more about: Using Silverlight HD Streaming out in the non-technical world (horses and equestrian sport).  Migrating to Access Web Services and VB .Net from VBA (see the Access 2010/SharePoint 2010 interest above) Windows Phone 7!  Exciting opportunities both for Green and Sustainability and for my "day job" of Environmental, Health & Safety (EHS). My day job is Environmental, Health & Safetey (EHS) consulting and software solutions, where that interfaces with the developer world is with respect to opportunities around Green and Sustainability, The SmartGrid and Juval Lowy's EnergyNet, both of which will require a lot of technology and software to make them work, The new Microsoft Partner competency for "Digital Home", and The Y2K kind of deadline around how managing chemicals in ERP systems is changing because of Global Harmonization, which hits the EU with a hard deadline on 11/30/10 (yes, this year), and hits the USA about 15 months later. Hope you enjoy my contributions to the digital geek community, and feel free to email me, [email protected] (the email leftover after my digital identity was blown away), and [email protected] (this one could go away at some future point) Best, Kathy Malone

    Read the article

  • Lubuntu upgrade to 13.04 killed sound with ALSA. How to troubleshoot?

    - by Sven
    After upgrading to 13.04 from 12.10 Lubuntu lost audio playback after unplugging usb soundcard (Polycom) and plugging it back in. Volume control was gray and leading to pulseaudio mixer (not installed) so I uninstalled the pulseaudio package. I also removed and reinstalled the alsa-base package. After restart I have the alsamixer back everything seemingly as usual(volume 100%, unmute) but every sound program gets me errors no matter what device I select. aplay -L: null Discard all samples (playback) or generate zero samples (capture) pulse PulseAudio Sound Server default:CARD=NVidia HDA NVidia, ALC662 rev1 Analog Default Audio Device sysdefault:CARD=NVidia HDA NVidia, ALC662 rev1 Analog Default Audio Device front:CARD=NVidia,DEV=0 HDA NVidia, ALC662 rev1 Analog Front speakers surround40:CARD=NVidia,DEV=0 HDA NVidia, ALC662 rev1 Analog 4.0 Surround output to Front and Rear speakers surround41:CARD=NVidia,DEV=0 HDA NVidia, ALC662 rev1 Analog 4.1 Surround output to Front, Rear and Subwoofer speakers surround50:CARD=NVidia,DEV=0 HDA NVidia, ALC662 rev1 Analog 5.0 Surround output to Front, Center and Rear speakers surround51:CARD=NVidia,DEV=0 HDA NVidia, ALC662 rev1 Analog 5.1 Surround output to Front, Center, Rear and Subwoofer speakers surround71:CARD=NVidia,DEV=0 HDA NVidia, ALC662 rev1 Analog 7.1 Surround output to Front, Center, Side, Rear and Woofer speakers iec958:CARD=NVidia,DEV=0 HDA NVidia, ALC662 rev1 Digital IEC958 (S/PDIF) Digital Audio Output hdmi:CARD=NVidia,DEV=0 HDA NVidia, HDMI 0 HDMI Audio Output dmix:CARD=NVidia,DEV=0 HDA NVidia, ALC662 rev1 Analog Direct sample mixing device dmix:CARD=NVidia,DEV=1 HDA NVidia, ALC662 rev1 Digital Direct sample mixing device dmix:CARD=NVidia,DEV=3 HDA NVidia, HDMI 0 Direct sample mixing device dsnoop:CARD=NVidia,DEV=0 HDA NVidia, ALC662 rev1 Analog Direct sample snooping device dsnoop:CARD=NVidia,DEV=1 HDA NVidia, ALC662 rev1 Digital Direct sample snooping device dsnoop:CARD=NVidia,DEV=3 HDA NVidia, HDMI 0 Direct sample snooping device hw:CARD=NVidia,DEV=0 HDA NVidia, ALC662 rev1 Analog Direct hardware device without any conversions hw:CARD=NVidia,DEV=1 HDA NVidia, ALC662 rev1 Digital Direct hardware device without any conversions hw:CARD=NVidia,DEV=3 HDA NVidia, HDMI 0 Direct hardware device without any conversions plughw:CARD=NVidia,DEV=0 HDA NVidia, ALC662 rev1 Analog Hardware device with all software conversions plughw:CARD=NVidia,DEV=1 HDA NVidia, ALC662 rev1 Digital Hardware device with all software conversions plughw:CARD=NVidia,DEV=3 HDA NVidia, HDMI 0 Hardware device with all software conversions default:CARD=Communicator Default Audio Device sysdefault:CARD=Communicator Default Audio Device front:CARD=Communicator,DEV=0 Polycom Communicator, USB Audio Front speakers surround40:CARD=Communicator,DEV=0 Polycom Communicator, USB Audio 4.0 Surround output to Front and Rear speakers surround41:CARD=Communicator,DEV=0 Polycom Communicator, USB Audio 4.1 Surround output to Front, Rear and Subwoofer speakers surround50:CARD=Communicator,DEV=0 Polycom Communicator, USB Audio 5.0 Surround output to Front, Center and Rear speakers surround51:CARD=Communicator,DEV=0 Polycom Communicator, USB Audio 5.1 Surround output to Front, Center, Rear and Subwoofer speakers surround71:CARD=Communicator,DEV=0 Polycom Communicator, USB Audio 7.1 Surround output to Front, Center, Side, Rear and Woofer speakers iec958:CARD=Communicator,DEV=0 Polycom Communicator, USB Audio IEC958 (S/PDIF) Digital Audio Output dmix:CARD=Communicator,DEV=0 Polycom Communicator, USB Audio Direct sample mixing device dsnoop:CARD=Communicator,DEV=0 Polycom Communicator, USB Audio Direct sample snooping device hw:CARD=Communicator,DEV=0 Polycom Communicator, USB Audio Direct hardware device without any conversions plughw:CARD=Communicator,DEV=0 Polycom Communicator, USB Audio Hardware device with all software conversions etc/asound.conf: defaults.ctl.card 1 defaults.pcm.card 1 defaults.pcm.device 1 Following gets same result with both devices. aplay -vv -D front:CARD=NVidia,DEV=0 "Release the Pressure.wav": Playing WAVE 'Release the Pressure.wav' : Signed 16 bit Little Endian, Rate 44100 Hz, Mono aplay: set_params:1087: Channels count non available Guayadeque mp3 playback: AL lib: alsa_open_playback: Could not open playback device 'default': No such file or directory 21:32:14: Error: Gstreamer error 'Configured audiosink playbackbin is not working.' Audacious: ALSA error: snd_mixer_attach failed: No such file or directory. ALSA error: snd_pcm_open failed: No such device. So How do I fix my audio? UPDATE: I removed the usb soundcard and got rid of all alsa config. Everything is working as before the install but it sure feels fragile.

    Read the article

  • 1 Zettabyte Is Equal to 1 Million Petabytes

    - by Gopinath
    Geeks recently coined a new English term, Zettabyte, to measure the rapidly growing digital information footprint. So what is a Zettabyte? A Zettabyte is equal to 1 million Petabytes or 1 trillion terabytes and 1 quadrillion gigabytes. Symbol To Represent Zettabyte According to wikipedia the symbol ZB is used to represent a Zettabyte. So we can write 10 ZB to represent 10 Zettabytes. Human’s Digital Output Will be 1.2 Zettabytes By End Of 2010 Are you wondering why do we need a term to measure digital data? Tech research firm IDC has recently published a report that estimates current digital footprint created by us so far at 8 million Petabytes – the equivalent of 8,000,000,000,000 GB. This foot print is expected to pass 1.2 Zettabytes by the end of 2010. cc image credit:flickr Join us on Facebook to read all our stories right inside your Facebook news feed.

    Read the article

  • Find if a user is facing a certain Location using Digital Compass by constructing a triangle and usi

    - by Aidan
    Hi Guys, I'm constructing a geolocation based application and I'm trying to figure out a way to make my application realise when a user is facing the direction of the given location (a particular long / lat co-ord). I've done some Googling and checked the SDK but can't really find anything for such a thing. Does anyone know of a way? To clarify Android knows my location, the second location and my orientation. What I want is a way for Android to recognise when my orientation is "facing" the second location (e.g within 90 Degrees or so). We're also assuming that the user is stationary and needs updates every second or so therefore getBearing(); is useless. Alright so we get it has to be math, there appears to be no simple SDK stuff we can use. I did some searching of my own and found Barycentric Co-ords http://www.blackpawn.com/texts/pointinpoly/default.html . So what I'm trying to do now is map the camera's field of view. For Example if the person is facing a certain direction the program should construct a triangle around that field of view, e.g it should make one vertices the phone's position and then go out either side for a set distance making the 2 end points vertices constructing a triangle. If I had this I could then apply Barycentric co-ords to see if the point lay within the newly constructed triangle. Idea's anyone? Example. I could get my current orientation, add 45 to it and go up X distance one side and subtact 45 and go up X distance the other side to find my 2 other points. Though, how would I make android know which way it should go "up" I guess? It would know its baring as this stage so I need it to recognise it's bearing and go out that direction.

    Read the article

  • How do digital certificates prove the identity of a device?

    - by StackedCrooked
    I understand how the relation between issuer and subject certificates enables verification of the subject's authenticity. If I connect to a networked device, and it sends me its certificate to identify itself, then I can verify that it was issued by a trusted party and that it has not been tampered with in any way. However, suppose I simply upload this certificate onto another device. Then what prevents me from having this device identify itself with the copied certificate?

    Read the article

  • what is the best mid/high-end class audio/music creation audio sound card?

    - by Chris
    Hello, I have a computershop myself, and I repair computers. But one of the things I really don't know (yet) is the performace od audio cards for music creation with midi. I have searched and searched and came up with some good reviews, but after browsing for a couple of hours I could't see the trees trough the forrest :-D (it's a dutch expression) At one moment I thought the M-Audio - Delta 1010LT would be a good PCIe card, later on I read that this card was released years ago. (but that could be false information) Also any personal expierence would be great, but not necessairy. I have searched a few cards, and I hope someone can help me make a choice for a friend of mine. He's buget is between $100 and $350 I know there are audio cards from $ 500 - $1850,- this is just too expensive. The following specs are crucial: ASIO Midi Mic in minimal 5.1, 7.1 recommended it's not for airplay, but just to compose music at home. using Ableton and midi keyboard. 1. M-Audio - Delta 1010LT: 8 x 8 analog I/O 2 mic preamps or line inputs S/PDIF digital I/O (coaxial) with 2-channel PCM SCMS copy protection control digital I/O supports surround-encoded AC-3 and DTS pass-through 1 x 1 MIDI I/O directly drive up to 7.1 surround (bass management software included) software controlled 36-bit internal DSP digital mixing/routing +4dbu/-10dBV operation individually switched in software word clock I/O for sample accurate device synchronization 2. RME HDSP 9632: * Stereo Analog Ein- und Ausgang, symmetrisch*, 24-Bit/192kHz, > 110 dB SNR * Optionale Erweiterungsboards mit je 4 symmetrischen Ein- und Ausgängen * Alle analogen I/Os voll 192 kHz-fähig, also keine Reduzierung der Kanalzahl * 1 x ADAT Digital In/Out, 96 kHz-fähig (S/MUX) * 1 x SPDIF Digital In/Out, 192 kHz-fähig * 1 x Breakout Kabel für koaxialen SPDIF-Betrieb* * Also bis zu 16 Ein-und Ausgänge gleichzeitig nutzbar! * 1 x Stereo Kopfhörerausgang, parallel zum analogen Ausgang, aber eigene Pegelanpassung * 1 x MIDI I/O für 16 Kanäle Hi-Speed MIDI über Breakout Kabel * DIGICheck, RMEs einzigartiges Meter- und Analysetool mit Spectral Analyser, Professionelle Level Meter 2/8/16-Kanalig, Vector Audio Scope und diversen weiteren Analysefunktionen * HDSP Meter Bridge: Frei skalierbare Levelmeter mit Peak- und RMS Berechnung in Hardware * TotalMix: 512-Kanal Mischer mit 40 Bit interner Auflösung 3. EMU 1212M (1212 M) PCIe: * Top kwaliteit convertors 24-bit/192kHz convertors. * Hardware gestuurde effecten. * DSP zero-latency hardware mixen en monitoring. * Analoge en digitale I/O plus MIDI. * EMU Production Tools Software Bundle - Cakewalk SONAR , Steinberg Cubase LE, Ableton Live E-MU Edition **EMU 1212M PCI-e inputs/outputs:** * 2 balanced jack inputs. * 2 balanced jack outputs. * 24-bit/192kHz ADAT I/O. * 24-bit/192kHz Coaxiale S/PDif I/O switchable to AES/EBU. * MIDI I/O. 4. M-Audio Audiophile 192: - Up to 24-bit/192kHz audio - 2 balanced analog inputs (1/4” TRS) - 2 balanced analog outputs (1/4” TRS) - S/PDIF digital I/O (coaxial RCA connectors) with 2-channel PCM - SCMS copy protection control - Digital I/O supports surround-encoded AC-3 and DTS pass-through - Direct hardware input monitoring via separate balanced 1/4” TRS monitor outputs - Software routing of inputs and outputs - Digital I/O can be routed to/from external effects - 16-channel MIDI I/O - ASIO, WDM, GSIF 2 and Core Audio driver support for compatibility with most applications - 64-bit driver support for Windows - PCI 2.2 compatibility - Apple G5 compatible - Incompatible exceptions - Includes Ableton Live Lite music production software, so you can make music right away - Works with other Delta cards Technical Specifcations: - Compatibility - ASIO - WDM - GSIF 2 - Core Audio

    Read the article

  • WinQual: Why would WER not accept code-signing certificates?

    - by Ian Boyd
    In 2005 i tried to establish a WinQual account with Microsoft, so i could pick up our (if any) crash dump files submitted automatically through Windows Error Reporting (WER). i was not allowed to have my crash dumps, because i don't have a Verisign certificate. Instead i have a cheaper one, generated by a Verisign subsidiary: Thawte. The method in which you join is: you digitally sign a sample exe they provide. This proves that you are the same signer that signed apps that they got crash dumps from in the wild. Cryptographically, the private key is needed to generate a digital signature on an executable. Only the holder of that private key can create a signature with for the matching public key. It doesn't matter who generated that private key. That includes certificates that are generated from: self-signing Wells Fargo DigiCert SecureTrust Trustware QuoVadis GoDaddy Entrust Cybertrust GeoTrust GlobalSign Comodo Thawte Verisign Yet Microsof's WinQual only accepts digital certificates generated by Verisign. Not even Verisign's subsidiaries are good enough (Thawte). Can anyone think of any technical, legal or ethical reason why Microsoft doesn't want to accept code-signing certificates? The WinQual site says: Why Is a Digital Certificate Required for Winqual Membership? A digital certificate helps protect your company from individuals who seek to impersonate members of your staff or who would otherwise commit acts of fraud against your company. Using a digital certificate enables proof of an identity for a user or an organization. Is somehow a Thawte digital certificate not secure? Two years later, i sent a reminder notice to WinQual that i've been waiting to be able to get at my crash dumps. The response from WinQual team was: Hello, Thanks for the reminder. We have notified the appropriate people that this is still a request. In 2008 i asked this question in a Microsoft support forum, and the response was: We are only setup to accept VeriSign Certificates at this point. We have not had an overwhelming demand to support other types of certificates. What can it possibly mean to not be "setup" to accept other kinds of certificates? If the thumbprint of the key that signed the WinQual.exe test app is the same as the thumbprint that signed the executable who's crash dump you got in the wild: it is proven - they are my crash dumps, give them to me. And it's not like there's a special API to check if a Verisign digital signature is valid, as opposed to all other digital signatures. A valid signature is valid no matter who generated the key. Microsoft is free to not trust the signer, but that's not the same as identity. So that is my question, can anyone think of any practical reason why WinQual isn't setup to support digital signatures? One person theorized that the answer is that they're just lazy: Not that I know but I would assume that the team running the winQual system is a live team and not a dev team - as in, personality and skillset geared towards maintenance of existing systems. I could be wrong though. They don't want to do work to change it. But can anyone think of anything that would need to be changed? It's the same logic no matter what generated the key: "does the thumbprint match". What am i missing?

    Read the article

  • Static background noise while using new headset Ubuntu 13.04

    - by ThundLayr
    Today I bought a new gaming headset (Gx-Gaming Lychas), and when I tried to record some gameplay-comentary I noticed that there always is a static background noise, I just recorded an example so you guys can listen it (no downloaded needed): http://www47.zippyshare.com/v/65167832/file.html I'm using Kubuntu 13.04 and Kernel version is 3.8.0-19, my laptop is an Acer Travelmate 5760Z, I tried tons of configurations on Alsamixer and none of them made result, I really need to get this working so any kind of help will be very aprecciated. cat /proc/asound/cards: 0 [PCH ]: HDA-Intel - HDA Intel PCH HDA Intel PCH at 0xc6400000 irq 44 cat /proc/asound/card0/codec#0 Codec: Conexant CX20588 Address: 0 AFG Function Id: 0x1 (unsol 1) Vendor Id: 0x14f1506c Subsystem Id: 0x10250574 Revision Id: 0x100003 No Modem Function Group found Default PCM: rates [0x160]: 44100 48000 96000 bits [0xe]: 16 20 24 formats [0x1]: PCM Default Amp-In caps: N/A Default Amp-Out caps: N/A State of AFG node 0x01: Power states: D0 D1 D2 D3 D3cold CLKSTOP EPSS Power: setting=D0, actual=D0 GPIO: io=4, o=0, i=0, unsolicited=1, wake=0 IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[2]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[3]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 Node 0x10 [Audio Output] wcaps 0xc1d: Stereo Amp-Out R/L Control: name="Headphone Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Control: name="Headphone Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Device: name="CX20588 Analog", type="Audio", device=0 Amp-Out caps: ofs=0x4a, nsteps=0x4a, stepsize=0x03, mute=1 Amp-Out vals: [0x4a 0x4a] Converter: stream=8, channel=0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Node 0x11 [Audio Output] wcaps 0xc1d: Stereo Amp-Out R/L Control: name="Speaker Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Control: name="Speaker Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Amp-Out caps: ofs=0x4a, nsteps=0x4a, stepsize=0x03, mute=1 Amp-Out vals: [0x80 0x80] Converter: stream=8, channel=0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Node 0x12 [Audio Output] wcaps 0x611: Stereo Digital Converter: stream=0, channel=0 Digital: Digital category: 0x0 IEC Coding Type: 0x0 PCM: rates [0x160]: 44100 48000 96000 bits [0xe]: 16 20 24 formats [0x5]: PCM AC3 Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Node 0x13 [Beep Generator Widget] wcaps 0x70000c: Mono Amp-Out Control: name="Beep Playback Volume", index=0, device=0 ControlAmp: chs=1, dir=Out, idx=0, ofs=0 Control: name="Beep Playback Switch", index=0, device=0 ControlAmp: chs=1, dir=Out, idx=0, ofs=0 Amp-Out caps: ofs=0x07, nsteps=0x07, stepsize=0x0f, mute=0 Amp-Out vals: [0x00] Node 0x14 [Audio Input] wcaps 0x100d1b: Stereo Amp-In R/L Control: name="Capture Volume", index=0, device=0 ControlAmp: chs=3, dir=In, idx=0, ofs=0 Control: name="Capture Switch", index=0, device=0 ControlAmp: chs=3, dir=In, idx=0, ofs=0 Device: name="CX20588 Analog", type="Audio", device=0 Amp-In caps: ofs=0x4a, nsteps=0x50, stepsize=0x03, mute=1 Amp-In vals: [0x50 0x50] [0x80 0x80] [0x80 0x80] [0x80 0x80] Converter: stream=4, channel=0 SDI-Select: 0 PCM: rates [0x160]: 44100 48000 96000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 4 0x17* 0x18 0x23 0x24 Node 0x15 [Audio Input] wcaps 0x100d1b: Stereo Amp-In R/L Amp-In caps: ofs=0x4a, nsteps=0x50, stepsize=0x03, mute=1 Amp-In vals: [0x4a 0x4a] [0x4a 0x4a] [0x4a 0x4a] [0x4a 0x4a] Converter: stream=0, channel=0 SDI-Select: 0 PCM: rates [0x160]: 44100 48000 96000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 4 0x17* 0x18 0x23 0x24 Node 0x16 [Audio Input] wcaps 0x100d1b: Stereo Amp-In R/L Amp-In caps: ofs=0x4a, nsteps=0x50, stepsize=0x03, mute=1 Amp-In vals: [0x4a 0x4a] [0x4a 0x4a] [0x4a 0x4a] [0x4a 0x4a] Converter: stream=0, channel=0 SDI-Select: 0 PCM: rates [0x160]: 44100 48000 96000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 4 0x17* 0x18 0x23 0x24 Node 0x17 [Audio Selector] wcaps 0x30050d: Stereo Amp-Out Control: name="Mic Boost Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Amp-Out caps: ofs=0x00, nsteps=0x04, stepsize=0x27, mute=0 Amp-Out vals: [0x04 0x04] Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 4 0x1a 0x1b* 0x1d 0x1e Node 0x18 [Audio Selector] wcaps 0x30050d: Stereo Amp-Out Amp-Out caps: ofs=0x00, nsteps=0x04, stepsize=0x27, mute=0 Amp-Out vals: [0x00 0x00] Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 4 0x1a* 0x1b 0x1d 0x1e Node 0x19 [Pin Complex] wcaps 0x400581: Stereo Control: name="Headphone Jack", index=0, device=0 Pincap 0x0000001c: OUT HP Detect Pin Default 0x04214040: [Jack] HP Out at Ext Right Conn = 1/8, Color = Green DefAssociation = 0x4, Sequence = 0x0 Pin-ctls: 0xc0: OUT HP Unsolicited: tag=01, enabled=1 Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 2 0x10* 0x11 Node 0x1a [Pin Complex] wcaps 0x400481: Stereo Control: name="Internal Mic Phantom Jack", index=0, device=0 Pincap 0x00001324: IN Detect Vref caps: HIZ 50 80 Pin Default 0x90a70130: [Fixed] Mic at Int N/A Conn = Analog, Color = Unknown DefAssociation = 0x3, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x24: IN VREF_80 Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Node 0x1b [Pin Complex] wcaps 0x400581: Stereo Control: name="Mic Jack", index=0, device=0 Pincap 0x00011334: IN OUT EAPD Detect Vref caps: HIZ 50 80 EAPD 0x0: Pin Default 0x04a19020: [Jack] Mic at Ext Right Conn = 1/8, Color = Pink DefAssociation = 0x2, Sequence = 0x0 Pin-ctls: 0x24: IN VREF_80 Unsolicited: tag=02, enabled=1 Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 2 0x10* 0x11 Node 0x1c [Pin Complex] wcaps 0x400581: Stereo Pincap 0x00000014: OUT Detect Pin Default 0x40f001f0: [N/A] Other at Ext N/A Conn = Unknown, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x40: OUT Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 2 0x10* 0x11 Node 0x1d [Pin Complex] wcaps 0x400581: Stereo Pincap 0x00010034: IN OUT EAPD Detect EAPD 0x0: Pin Default 0x40f001f0: [N/A] Other at Ext N/A Conn = Unknown, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x40: OUT Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 2 0x10* 0x11 Node 0x1e [Pin Complex] wcaps 0x400481: Stereo Pincap 0x00000024: IN Detect Pin Default 0x40f001f0: [N/A] Other at Ext N/A Conn = Unknown, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x00: Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Node 0x1f [Pin Complex] wcaps 0x400501: Stereo Control: name="Speaker Phantom Jack", index=0, device=0 Pincap 0x00000010: OUT Pin Default 0x92170110: [Fixed] Speaker at Int Front Conn = Analog, Color = Unknown DefAssociation = 0x1, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x40: OUT Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 2 0x10 0x11* Node 0x20 [Pin Complex] wcaps 0x400781: Stereo Digital Pincap 0x00000010: OUT Pin Default 0x40f001f0: [N/A] Other at Ext N/A Conn = Unknown, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x00: Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 1 0x12 Node 0x21 [Audio Output] wcaps 0x611: Stereo Digital Converter: stream=0, channel=0 Digital: Digital category: 0x0 IEC Coding Type: 0x0 PCM: rates [0x160]: 44100 48000 96000 bits [0xe]: 16 20 24 formats [0x5]: PCM AC3 Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Node 0x22 [Pin Complex] wcaps 0x400781: Stereo Digital Pincap 0x00000010: OUT Pin Default 0x40f001f0: [N/A] Other at Ext N/A Conn = Unknown, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x00: Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 1 0x21 Node 0x23 [Pin Complex] wcaps 0x40040b: Stereo Amp-In Amp-In caps: ofs=0x00, nsteps=0x04, stepsize=0x2f, mute=0 Amp-In vals: [0x00 0x00] Pincap 0x00000020: IN Pin Default 0x40f001f0: [N/A] Other at Ext N/A Conn = Unknown, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x00: Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Node 0x24 [Audio Mixer] wcaps 0x20050b: Stereo Amp-In Amp-In caps: ofs=0x4a, nsteps=0x4a, stepsize=0x03, mute=1 Amp-In vals: [0x00 0x00] [0x00 0x00] Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 2 0x10 0x11 Node 0x25 [Vendor Defined Widget] wcaps 0xf00000: Mono

    Read the article

  • .com domain transfer failing

    - by digital
    Hi, I'm trying to transfer one of my .com addresses between registrars. I'm down as the owner contact (confirmed working) and the losing registrar is down as the tech and admin contact. Last week I received an email stating that the domain transfer had been rejected by the losing registrar. I contacted the losing registrar and they denied that. My money from the winning registrar was refunded and I was told to try again. I've initiated the transfer again and received confirmation of pending transfer, I gave the correct EPP code and confirmed the transfer. Currently the status on the domain is set as OK, should it not be transfer pending? According to my name.com transfer page if the transfer is not authd in 5 days it will auto transfer anyway. I don't believe this will happen. Name.com have been really helpful but they can't really do much more now. The losing registrar is not being helpful hence me turning here. What can I do to make sure the domain transfers? The domain transfer is set to expire on the 17th. Any help would be greatly appreciated.

    Read the article

  • Google webmaster tools: parameters that only apply on one page

    - by Imagine digital
    I'm trying to get my e-commerce website on google and still figuring out how it all works. Now, I have seen this feature named URL-parameters, allowing me to set different parameters that affect page content to be indexed (one can also set parameters that do not affect the page, but for me that does not apply..). The question I have about this is whether and how I should add parameters that I only have on some pages of my site. example: The homepage of my site is www.mysite.nl. no parameters at all. But when a user clicks the navigation bar, it links to www.mysite.nl/itemList.php?category=&....subCategory=.... The parameters category and subCategory define whether there is content on my itemList page and what content that is. It gets matching products out of my database based on those 2 variables. The question: How do I make sure that I apply the google URL Parameters function decently for my website?

    Read the article

  • NRF Big Show 2011 -- Part 2

    - by David Dorf
    One of the things I love about attending NRF is visiting the smaller booths to see what new innovative ideas have sprung up. After all, by watching emerging technologies we can get a sense of how the retail experience might change. After NRF I'm hoping to write a post on what I found, if anything, so be sure to check back. At the Oracle Retail booth we'll be demonstrating some of the aspects of the changing retail experience. These demos use a mix of GA and experimental components. Here are some highlights: 1. Checkin We wrote a consumer iPhone app we call Store Gateway that lets consumers access information from the store. They'll start by doing a checkin when they arrive that will alert the store manager via another iPhone app we wrote called Mobile Manager. Additionally, we display a welcome messaging using Starmount's digital sign. 2. Receive Offers There are three interaction points where a store can easily make an offer to a consumer: checkin, product scans, and checkout. For this demo we're calling our Universal Offer Engine at checkin to determine the best offer for this particular consumer. This offer is then displayed on the consumer's phone as well as on the digital sign. 3. Scan Products To thwart consumers from scanning product barcodes, we used Store Inventory Management to print QRCodes on shelf label then provided access to a scanner in the Store Gateway iphone app. When the consumer scans the shelf label they are shown product information provided by the retailer. 4. Checkout While we don't have a NFC-enabled mobile phone, we have a NFC chip that can attach to a phone. We're using this to checkout using a reader provided by ViVOTech. Tap the phone on the reader, and the POS accesses the customer#, coupons, and payment information. This really speeds the checkout process. 5. Digital Receipt After the transaction is complete, a digital copy of the receipt is sent to Intuit's QuickReceipts where consumers to store all their digital receipts. There's even an iPhone app that provides easy access to the receipts. This covers about half of what what we'll be showing, so be sure to stop by. I'll also be talking about how mobile is impacting the retail experience at the Wednesday morning session NRF Mobile Retail Initiative: a Blueprint for Action. See you at the Big Show!

    Read the article

  • TDC: The Developer's Conference Day One

    - by Tori Wieldt
    The Developer's Conference (TDC) kicked off Wednesday in São Paulo, Brazil. With over 3000 developers in attendance over five days, it is the premier multi-community developer conference in Brazil, organized by Globalcode. Yara Senger, one of the organizers said, "We like to say multi-community rather than multi-technology because it is interesting and benefical when various communities get together. They learn so much from each other!" TDC includes tracks on Java and several other technologies, including SOA, Python, Ruby, mobile and digital TV. In the mobile track, developers who create a Java ME app will get a Nokia S40 phone!New this year at TDC is the Java University track, sponsored by Oracle.  It is aimed at university students and professionals who are new to Java. The lectures are introductory level, with an educational focus and practical exercises. The Java track and other tracks, such as SOA, mobile and Digital TV, are getting lots of help from the expertise of Brazilian JUGS members. Thanks to GoJava, JavaBahia, JavaNoroeste and SouJava!Carlos Fernando, one of the coordinators on the Digital TV track, said "My goal is to teach developers the basics of digital TV, and show them the tools used to build interactive TV applications." Fernando explained the concept of "the second screen:" that many people watch TV and have second smart device (tablet or smartphone) with them, and this creates many opportunities for developers. For example, while watching TV, a viewer can get extra content (interviews, behind the scenes) on their tablet. More interestingly, while watching their favorite TV show a viewer likes an outfit one of the actors is wearing, their smartphone can tell them where they can buy it nearby, or they can order it online immediately. Fernando exclaimed, "The opportunities for developers are nearly infinite in the area of digital TV!" At the TDC opening keynote, Debora Palermo, Oracle University country manager for Brazil, reminded attendees that Java is present in many devices, from simple to complex, and knowledge of this platform can open many doors in the labor market. She explained Oracle's Workforce Development Program (WDP), managed by Oracle University, which allows educational institutions to deliver Oracle training. WDP allows for easy and low-cost access to Oracle training in local communities across the world. "Oracle University is committed to creating the next generation of Java developers, and WDP can make that happen," Palermo said. As of March 2012, Oracle University is partnering with Globalcode to offer WDP. Students can earn official Oracle Course Certifications, a great way to learn Java.Brazilian developers that cannot attend TDC can watch live streaming.

    Read the article

  • Webcast

    - by bwalstra
    v\:* {behavior:url(#default#VML);} o\:* {behavior:url(#default#VML);} w\:* {behavior:url(#default#VML);} .shape {behavior:url(#default#VML);} Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Calibri","sans-serif";} Invites You To: Monetizing Digital Media From Clicks To Cash Digital goods and services are booming, and smart businesses are transforming the way they sell and deliver their offerings in the exploding digital marketplace. Using information-services, credit-card, and digital-media examples Oracle’s Mustafa Oyumi and Tripp Partain will show the Oracle Digital Media solution - from clicks to cash: · Design, Model, and Launch New Products · Review Real Time Market Effectiveness and Respond · Rate, Bill, Invoice, Revenue Rec, and Collect · Determine Rights, Royalties, Licensing, and Commissions · Analyze Enterprise Results Friday, July 6, 2012 11:00 a.m. – 11:45 a.m. <Webcast Details> <Webcast Details> Agenda 11:00 a.m. Overview 11:10 a.m. Demo 11:30 a.m. Q&A Copyright © 2012, Oracle. All rights reserved. Contact Us | Legal Notices and Terms of Use | Privacy Statement 36526 Oracle Corporation - Worldwide Headquarters, 500 Oracle Parkway, OPL - E-mail Services, Redwood Shores, CA 94065, United States Create or update your profile to receive customized e-mail about Oracle products and services. If you do not wish to receive any further electronic marketing communications from Oracle you can Opt-Out completely, please note you will no longer receive newsletters and product information you may have subscribed to.

    Read the article

  • PC BluRay - Multichannel HD Audio output

    - by sheepsimulator
    When playing a BluRay movie on a PC (any OS, Mac/Win/Linux), I have some questions about audio output: When playing a BluRay disc on the PC using a BluRay player program, can it decode the multichannel (7.1) LPCM/ Dolby Digital Plus / Dolby TrueHD / DTS-HD / DTS-HDMA soundtracks in their HD formats (ie, without downmixing to Dolby Digital or DTS or PCM) and output the audio directly to the soundcard's 7.1 line-level analog outputs? Is it possible to bitstream the the multichannel (7.1) LPCM/ Dolby Digital Plus / Dolby TrueHD / DTS-HD / DTS-HDMA soundtracks in their HD formats (ie, without downmixing to Dolby Digital or DTS or PCM) over the HDMI output to a receiver when using a BluRay player program? I'd kinda like to know. I'm contemplating building a home theater PC, and the above functionality is important. I'd prefer that #1 is possible, actually, because it would mean I wouldn't have to buy a receiver.

    Read the article

  • Making sense of S.M.A.R.T

    - by James
    First of all, I think everyone knows that hard drives fail a lot more than the manufacturers would like to admit. Google did a study that indicates that certain raw data attributes that the S.M.A.R.T status of hard drives reports can have a strong correlation with the future failure of the drive. We find, for example, that after their first scan error, drives are 39 times more likely to fail within 60 days than drives with no such errors. First errors in re- allocations, offline reallocations, and probational counts are also strongly correlated to higher failure probabil- ities. Despite those strong correlations, we find that failure prediction models based on SMART parameters alone are likely to be severely limited in their prediction accuracy, given that a large fraction of our failed drives have shown no SMART error signals whatsoever. Seagate seems like it is trying to obscure this information about their drives by claiming that only their software can accurately determine the accurate status of their drive and by the way their software will not tell you the raw data values for the S.M.A.R.T attributes. Western digital has made no such claim to my knowledge but their status reporting tool does not appear to report raw data values either. I've been using HDtune and smartctl from smartmontools in order to gather the raw data values for each attribute. I've found that indeed... I am comparing apples to oranges when it comes to certain attributes. I've found for example that most Seagate drives will report that they have many millions of read errors while western digital 99% of the time shows 0 for read errors. I've also found that Seagate will report many millions of seek errors while Western Digital always seems to report 0. Now for my question. How do I normalize this data? Is Seagate producing millions of errors while Western digital is producing none? Wikipedia's article on S.M.A.R.T status says that manufacturers have different ways of reporting this data. Here is my hypothesis: I think I found a way to normalize (is that the right term?) the data. Seagate drives have an additional attribute that Western Digital drives do not have (Hardware ECC Recovered). When you subtract the Read error count from the ECC Recovered count, you'll probably end up with 0. This seems to be equivalent to Western Digitals reported "Read Error" count. This means that Western Digital only reports read errors that it cannot correct while Seagate counts up all read errors and tells you how many of those it was able to fix. I had a Seagate drive where the ECC Recovered count was less than the Read error count and I noticed that many of my files were becoming corrupt. This is how I came up with my hypothesis. The millions of seek errors that Seagate produces are still a mystery to me. Please confirm or correct my hypothesis if you have additional information. Here is the smart status of my western digital drive just so you can see what I'm talking about: james@ubuntu:~$ sudo smartctl -a /dev/sda smartctl version 5.38 [x86_64-unknown-linux-gnu] Copyright (C) 2002-8 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Device Model: WDC WD1001FALS-00E3A0 Serial Number: WD-WCATR0258512 Firmware Version: 05.01D05 User Capacity: 1,000,204,886,016 bytes Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 8 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Thu Jun 10 19:52:28 2010 PDT SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0 3 Spin_Up_Time 0x0027 179 175 021 Pre-fail Always - 4033 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 270 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0 9 Power_On_Hours 0x0032 098 098 000 Old_age Always - 1468 10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0 11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 262 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 46 193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 223 194 Temperature_Celsius 0x0022 105 102 000 Old_age Always - 42 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0

    Read the article

  • Loose component cables causing HDMI video problems

    - by jwir3
    I'm not sure this is the correct forum, but I'll ask anyway. I have an A/V setup at home that has something like the following: Five Components (actually a few more, like a CD player, but they don't really relate to this question): Older Pioneer Receiver Digital Set Top Box Sony BluRay Player Samsung Plasma TV Speakers The reason for the receiver is so that all the sound can go through the speakers, rather than some going to the TV speakers and some to the external speakers. They are connected as follows: Digital Set Top Box connects via component video to Samsung TV directly via Component 2 (audio goes to Older Pioneer Receiver). Sony BluRay player is connected via HDMI 1 to TV, but audio goes to the receiver. Now, the problem I'm having is that when I have the digital set top box connected, there are times when the Netflix or Hulu streams I watch through the Sony BluRay player (it's connected to a router for internet access) will lose video. What I mean by this is that the sound of the episode will keep playing, but the screen will go black. If I jiggle the component cables, it will often come back. If I disconnect the component cables, it will always come back. I've noticed that one of the connections (the red component cable) doesn't like to sit very well in the component socket in the back of the digital set top box. It seems like there is a bad connection here, but it doesn't seem like this should be affecting the HDMI input at all. What I've noticed, though, is that when I disconnect the digital set top box completely (i.e. remove the component cable from the back of the TV), the problem seems to resolve itself. I'm not talking about actually removing the cable physically, because I thought perhaps the cables were mashing against one another, and possibly jiggling each other loose. To correct this possible problem, I took the component cable completely out of the cable ties it was in in the back of my entertainment center, as well as pulled the digital set top box out from the entertainment center altogether. It's now connected directly to the TV, without any other cables touching it to cause some kind of weird interference or just physical pulling on the cable. Same problem. If, however, I disconnect the component cable and just leave it sitting behind the TV, then the problem goes away. So, my question is this - what could be causing this? Is it a case where it's an improperly shielded component cable that's causing interference with the HDMI input, or something that's wrong with the TV? It's an intermittent problem, so it's difficult to track down. The TV isn't that old, so it's probably still under warranty. I'm just wondering if there is something else I can do that might reduce this problem without having to haul a massive television set out of my house to get repaired/replaced.

    Read the article

  • How to give wife emergency access to logins, passwords, etc.?

    - by Torben Gundtofte-Bruun
    I'm the digital guru in my household. My wife is good with email and forum websites but she trusts me with all our important digital stuff -- such as online banking and other things that require passwords, but also family photos and the plethora of other digital things in a modern home. We discuss relevant actions but it's always me that executes the actions. If I should get "hit by a bus" then my wife would be thoroughly stranded -- she would have no idea what digital stuff is where on our computer, how to access it, what online accounts we have, and their login credentials are. It would also leave my many public appearances (personal websites, email accounts, social networks, etc.) unresolved. To complicate things, I'm one of those people who don't use password as my password everywhere; I use a mix of SuperGenPass and LastPass, and also two-factor authentication whenever possible. I don't have much hope that she would find her way through a written explanation of all that in a stressful situation. I could just tell her that she should ask my tech-savvy twin brother and then entrust him with my LastPass master passphrase. I feel that would have a high chance of success, but it's inelegant and leaves my wife without control of the information. How can I ensure that my wife has access to my digital remains?

    Read the article

  • When spliting MP4s with ffmpeg how do I include metadata?

    - by Josh
    I have a few MP4s that i want to upload to my flickr account but they have a maximum size of 500mb as mine is only about 550 i was planing to simply split them in half then upload them, but i want to make sure all the meta data is included but it does not seem to be. I have tried each of the following with no luck, (at the end of this post i have the original and the new ffprobe outputs): ffmpeg -ss 00:00:00.00 -t 00:04:19.35 -i SANY0069.MP4 -acodec copy -vcodec copy -map_metadata 0:0 SANY0069A.MP4 ffmpeg -ss 00:00:00.00 -t 00:04:19.35 -i SANY0069.MP4 -acodec copy -vcodec copy -map_meta_data SANY0069.MP4:SANY0069A.MP4 SANY0069A.MP4 with the this one I manually produced the individual meta tags that i took from this command ffmpeg -i SANY0069A.MP4 -f ffmetadata meta.txt ffmpeg -ss 00:00:00.00 -t 00:04:19.35 -i SANY0069.MP4 -acodec copy -vcodec copy -metadata major_brand="mp42" -metadata minor_version="1" -metadata compatible_brands="mp42avc1" -metadata creation_time="2012-09-29 09:05:50" -metadata comment="SANYO DIGITAL CAMERA CA9" -metadata comment-eng="SANYO DIGITAL CAMERA CA9" SANY0069A.MP4 using the output of the former command i also tried this: ffmpeg -ss 00:00:00.00 -t 00:04:19.35 -i SANY0069.MP4 -acodec copy -vcodec copy -f ffmetadata -i meta.txt SANY0069A.MP4 Output: sample output from my first command: ffmpeg -ss 00:00:00.00 -t 00:04:19.35 -i SANY0069.MP4 -acodec copy -vcodec copy -map_metadata 0:0 SANY0069A.MP4 ffmpeg version 0.8.12, Copyright (c) 2000-2011 the FFmpeg developers built on Jun 13 2012 09:57:38 with gcc 4.6.3 20120306 (Red Hat 4.6.3-2) configuration: --prefix=/usr --bindir=/usr/bin --datadir=/usr/share/ffmpeg --incdir=/usr/include/ffmpeg --libdir=/usr/lib64 --mandir=/usr/share/man --arch=x86_64 --extra-cflags='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -m64 -mtune=generic' --enable-bzlib --enable-libcelt --enable-libdc1394 --enable-libdirac --enable-libfreetype --enable-libgsm --enable-libmp3lame --enable-libopenjpeg --enable-librtmp --enable-libschroedinger --enable-libspeex --enable-libtheora --enable-libvorbis --enable-libvpx --enable-libx264 --enable-libxvid --enable-x11grab --enable-avfilter --enable-postproc --enable-pthreads --disable-static --enable-shared --enable-gpl --disable-debug --disable-stripping --shlibdir=/usr/lib64 --enable-runtime-cpudetect libavutil 51. 9. 1 / 51. 9. 1 libavcodec 53. 8. 0 / 53. 8. 0 libavformat 53. 5. 0 / 53. 5. 0 libavdevice 53. 1. 1 / 53. 1. 1 libavfilter 2. 23. 0 / 2. 23. 0 libswscale 2. 0. 0 / 2. 0. 0 libpostproc 51. 2. 0 / 51. 2. 0 Input #0, mov,mp4,m4a,3gp,3g2,mj2, from 'SANY0069.MP4': Metadata: major_brand : mp42 minor_version : 1 compatible_brands: mp42avc1 creation_time : 2012-09-29 09:05:50 comment : SANYO DIGITAL CAMERA CA9 comment-eng : SANYO DIGITAL CAMERA CA9 Duration: 00:08:38.71, start: 0.000000, bitrate: 9142 kb/s Stream #0.0(eng): Video: h264 (Constrained Baseline), yuv420p, 1280x720 [PAR 1:1 DAR 16:9], 9007 kb/s, 29.97 fps, 29.97 tbr, 30k tbn, 59.94 tbc Metadata: creation_time : 2012-09-29 09:05:50 Stream #0.1(eng): Audio: aac, 48000 Hz, stereo, s16, 127 kb/s Metadata: creation_time : 2012-09-29 09:05:50 File 'SANY0069A.MP4' already exists. Overwrite ? [y/N] y Output #0, mp4, to 'SANY0069A.MP4': Metadata: major_brand : mp42 minor_version : 1 compatible_brands: mp42avc1 creation_time : 2012-09-29 09:05:50 comment : SANYO DIGITAL CAMERA CA9 comment-eng : SANYO DIGITAL CAMERA CA9 encoder : Lavf53.5.0 Stream #0.0(eng): Video: libx264, yuv420p, 1280x720 [PAR 1:1 DAR 16:9], q=2-31, 9007 kb/s, 30k tbn, 29.97 tbc Metadata: creation_time : 2012-09-29 09:05:50 Stream #0.1(eng): Audio: aac, 48000 Hz, stereo, 127 kb/s Metadata: creation_time : 2012-09-29 09:05:50 Stream mapping: Stream #0.0 -> #0.0 Stream #0.1 -> #0.1 Press [q] to stop, [?] for help frame= 7773 fps=4644 q=-1.0 Lsize= 289607kB time=00:04:19.35 bitrate=9147.4kbits/s video:285416kB audio:4033kB global headers:0kB muxing overhead 0.054571% and finaly, when i compare the ffprobe of the original and the first split part i get the 2 following outputs: original ffprobe version 0.8.12, Copyright (c) 2007-2011 the FFmpeg developers built on Jun 13 2012 09:57:38 with gcc 4.6.3 20120306 (Red Hat 4.6.3-2) configuration: --prefix=/usr --bindir=/usr/bin --datadir=/usr/share/ffmpeg --incdir=/usr/include/ffmpeg --libdir=/usr/lib64 --mandir=/usr/share/man --arch=x86_64 --extra-cflags='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -m64 -mtune=generic' --enable-bzlib --enable-libcelt --enable-libdc1394 --enable-libdirac --enable-libfreetype --enable-libgsm --enable-libmp3lame --enable-libopenjpeg --enable-librtmp --enable-libschroedinger --enable-libspeex --enable-libtheora --enable-libvorbis --enable-libvpx --enable-libx264 --enable-libxvid --enable-x11grab --enable-avfilter --enable-postproc --enable-pthreads --disable-static --enable-shared --enable-gpl --disable-debug --disable-stripping --shlibdir=/usr/lib64 --enable-runtime-cpudetect libavutil 51. 9. 1 / 51. 9. 1 libavcodec 53. 8. 0 / 53. 8. 0 libavformat 53. 5. 0 / 53. 5. 0 libavdevice 53. 1. 1 / 53. 1. 1 libavfilter 2. 23. 0 / 2. 23. 0 libswscale 2. 0. 0 / 2. 0. 0 libpostproc 51. 2. 0 / 51. 2. 0 Input #0, mov,mp4,m4a,3gp,3g2,mj2, from 'SANY0069.MP4': Metadata: major_brand : mp42 minor_version : 1 compatible_brands: mp42avc1 creation_time : 2012-09-29 09:05:50 comment : SANYO DIGITAL CAMERA CA9 comment-eng : SANYO DIGITAL CAMERA CA9 Duration: 00:08:38.71, start: 0.000000, bitrate: 9142 kb/s Stream #0.0(eng): Video: h264 (Constrained Baseline), yuv420p, 1280x720 [PAR 1:1 DAR 16:9], 9007 kb/s, 29.97 fps, 29.97 tbr, 30k tbn, 59.94 tbc Metadata: creation_time : 2012-09-29 09:05:50 Stream #0.1(eng): Audio: aac, 48000 Hz, stereo, s16, 127 kb/s Metadata: creation_time : 2012-09-29 09:05:50 Split ffprobe version 0.8.12, Copyright (c) 2007-2011 the FFmpeg developers built on Jun 13 2012 09:57:38 with gcc 4.6.3 20120306 (Red Hat 4.6.3-2) configuration: --prefix=/usr --bindir=/usr/bin --datadir=/usr/share/ffmpeg --incdir=/usr/include/ffmpeg --libdir=/usr/lib64 --mandir=/usr/share/man --arch=x86_64 --extra-cflags='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -m64 -mtune=generic' --enable-bzlib --enable-libcelt --enable-libdc1394 --enable-libdirac --enable-libfreetype --enable-libgsm --enable-libmp3lame --enable-libopenjpeg --enable-librtmp --enable-libschroedinger --enable-libspeex --enable-libtheora --enable-libvorbis --enable-libvpx --enable-libx264 --enable-libxvid --enable-x11grab --enable-avfilter --enable-postproc --enable-pthreads --disable-static --enable-shared --enable-gpl --disable-debug --disable-stripping --shlibdir=/usr/lib64 --enable-runtime-cpudetect libavutil 51. 9. 1 / 51. 9. 1 libavcodec 53. 8. 0 / 53. 8. 0 libavformat 53. 5. 0 / 53. 5. 0 libavdevice 53. 1. 1 / 53. 1. 1 libavfilter 2. 23. 0 / 2. 23. 0 libswscale 2. 0. 0 / 2. 0. 0 libpostproc 51. 2. 0 / 51. 2. 0 Input #0, mov,mp4,m4a,3gp,3g2,mj2, from 'SANY0069A.MP4': Metadata: major_brand : isom minor_version : 512 compatible_brands: isomiso2avc1mp41 creation_time : 1970-01-01 00:00:00 encoder : Lavf53.5.0 comment : SANYO DIGITAL CAMERA CA9 Duration: 00:04:19.37, start: 0.000000, bitrate: 9146 kb/s Stream #0.0(eng): Video: h264 (Constrained Baseline), yuv420p, 1280x720 [PAR 1:1 DAR 16:9], 9015 kb/s, 29.97 fps, 29.97 tbr, 30k tbn, 59.94 tbc Metadata: creation_time : 1970-01-01 00:00:00 Stream #0.1(eng): Audio: aac, 48000 Hz, stereo, s16, 127 kb/s Metadata: creation_time : 1970-01-01 00:00:00 I know this is incredibly long but its actually a quite simple question. I thought it would be best to provide as much detail as possible. any advice here would be great, Thanks

    Read the article

< Previous Page | 8 9 10 11 12 13 14 15 16 17 18 19  | Next Page >