Search Results

Search found 4376 results on 176 pages for 'drivers'.

Page 12/176 | < Previous Page | 8 9 10 11 12 13 14 15 16 17 18 19  | Next Page >

  • How do I install the Intel Graphics driver in my system?

    - by John
    Can someone help me out and explain or point me in the right direction on how to check video drivers and see if my video card running okay? I had 10.04 installed on my Thinkpad r61 with Compiz Manager and life was great, until the machine took water damage. I bought an ASUS (X54H) since and am trying out 12.04, but the desktop just doesn't look right. I always struggled with video driver installation. There are no proprietary drivers available in the hardware manager. When I run lspci | grep VGA: 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) I will greatly appreciate your help. I want to use Linux more, but like I said video drivers appear to be my biggest concern. I have also tried 12.04 on my desktop PC, but again failed to configure video card, so switched back to Windows 7.

    Read the article

  • Wireless USB Adapter driver configuration

    - by Jones
    First I would like agree one thing that this is fully for Ubuntu, not for BackTrack. However I'm posting my BackTrack question here since I find similar problems in backtrack forum are being unanswered and Linux/Unix site of StackExchange has very low attraction. I'm having USB wifi adapter (iBall Baton), having chipset RTL8191SU. It displays available wifi networks in Wicd manager. But while trying to connect it gives me bad password. When I'm trying to run airmon-ng it didn't returned me the monitor mode. I tried to replace with Ubuntu 12.10 drivers. But it totally nulled the device functionality. However I restored the drivers. I'm interested to compile drivers as if anyone indicate the methods. Awaiting ideas!

    Read the article

  • What video graphic card would permit ubuntu's standard driver to work well?

    - by Rick
    I installed ubuntu 12.04. All seemed well until I installed the nvidia driver. Then crashola! This situation is untenable. It seems I cannot trust nvidia, and it seems that I cannot rely on ubuntu gurus to test 3rd party drivers. So, apparently some video card manufacturers do not care enough about the linux market to test their drivers, or are there too many 3rd party video cards so that ubuntu folks do not test any 3rd party video drivers? Hence the question: What video graphic card would permit me to use ubuntu's standard driver so that I do not have to rely on nvidia's or any other 3rd-party driver? Perhaps I could then install THAT card and have things work? The ubuntu standard driver actually worked prior to installing the nvidia driver, but not well, and that was because the display flickered, and flickering gives me a headache.

    Read the article

  • How can I install ATI Catalyst Video driver of Ubuntu 12.04.3?

    - by Eastsun
    EDIT My computer is Thinkpad E420 with Intel HD3000 and ATI 6630m. I have reinstalled my Ubuntu12.04.3 yesterday. I had successfully installed Ubuntu and ATI Catalyst Video driver many times about half year ago following these links: How do I get AMD/Intel Hybrid Graphics drivers to work? What is the correct way to install ATI Catalyst Video Drivers (fglrx)? However, this time I have no luck with installing ATI Catalyst Video driver. I have tried version 13.4, 13.1, 12.8 of ATI Catalyst Video driver. It seemed that 13.4 doesn't support 12.04 any more, following this link , the lowest Ubuntu version supported by ATI 13.4 is 12.10 and for the reset of the ATI drivers, the kernel version and xorg version of Ubuntu 12.04.3 is too high to be supported. So, should I stay on ubuntu 12.04.1 with ATI 12.8, or there is any way to install ATI driver on Ubuntu 12.04.3?

    Read the article

  • Wi-Fi Connection Issues.. tried a lot.. pls help

    - by nikvana
    I am posting a question for the first time, do not know coding and am relatively new to ubuntu, but a quick learner. I have an Acer Aspire One D270 notebook that came originally with Windows 7 starter installed. I have removed that and installed Ubuntu 12.04 I have chronic issues with connecting to the wi-fi. I figure it is due to issues with the driver(s) I think this is the driver I have- BCM4313 802.11bgn Wireless Network Adapter (on entering this in the terminal- lshw -C) I also installed the software Windows wireless drivers and it shows currently installed drivers as blank- but when i choose install new drivers, it asks me to select inf file which I do not know where to find. Please help with this, coders. Thanks a ton

    Read the article

  • What to do when a device has no driver for Windows 7 but it has Vista, XP drivers

    - by Mehper C. Palavuzlar
    This has always been a bothersome matter for me. Some devices (printers, scanners, etc.) have drivers for older versions of Windows (Vista, XP, 2000, NT) but no driver for Windows 7. What are my chances to install such devices on Windows 7? Example case: I have a Sharp printer & scanner (Sharp AR-122E N) which I have used for my old Windows XP based PC. Now I want to install it on a Windows 7 x64 based PC. Windows 7 cannot load its driver. I used the original driver CD but when I run the setup.exe (which is included in AR122EN111.exe, 6713KB), it says Cannot install driver on this operating system. Supported operating systems are: Windows 2000, XP, Vista. I tried to install the driver using compatibility settings. I tried Windows Vista and Windows XP SP3, but to no avail. The setup gave the same error. I also googled for Windows 7 driver for "Sharp AR-122E N" but it only listed the original driver that I tried. The official site of Sharp does not even list the driver for this product. In the past, the compatibility setting workaround did work for some devices, but this time it failed. What else can I do to overcome this problem?

    Read the article

  • System Settings -> Additional Drivers is empty. How then do I install proprietary drivers?

    - by learner
    I use Ubuntu 12.04. My graphics card is Geforce GT540M. I opened Synaptic Package manager and installed the following: nvidia-common nvidia-settings-update nvidia-common nvidia-current nvidia-current-updates The following were installed before(when unity launcher looked normal): jockey-common psensor nvidia-settings jockey-gtk xserver-xorg-video-nouveau My intention was to use the right Nvidia drivers. But apparently it didn't rightly install the drivers and now I have Unity 2D running!

    Read the article

  • AMD graphics drivers

    - by user284659
    I have a new laptop with dedicated graphics card and I decided I will go with Ubuntu 14.04. All is just fine and I love it but the repos for graphics drivers from Canonical are just well... old .Is there any problem if I install my graphics drivers from AMD's official website and not from Software Updater? It's just that from there i get the latest and greatest.I read the realease notes and 14.04 is supported.

    Read the article

  • Sound through HDMI with the NVIDIA drivers

    - by William
    I am running a media center setup with the display through HDMI, powered by a NVIDIA card. I am using the proprietary NVIDIA drivers availabler through the additional drivers utility, on Xubuntu 11.10. In the mixer, I have all the volumes unmuted and turned up to 100%, but no sound through the HDMI. If I plug in speakers the nd comes through just fine. What can I do to make the sound go through the HDMI and to the TV?

    Read the article

  • old kernel uninstall select video drivers

    - by Zero
    On synaptic selected my old kernel to uninstall: linux-generic linux-headers-3.2.0-31-generic linux-image-3.2.0-31-generic linux-image-3.2.0-33-generic linux-image-generic But if i select to uninstall linux-headers-3.2.0-33-generic it select my display drivers and after that wanna install pae kernel. It's possible delete header files without loosing my video drivers and without installing pae kernel ?

    Read the article

  • SATA Driver for Acer Aspire One D257

    - by Robert Niestroj
    i have a Acer Aspire One D257. In this netbook the hard disk is defect so i bought a new one. Now i want to reinstall Windows 7. Im using an external DVD Drive plugged into USB. The Windows 7 DVD is staring, Win7 setup is starting and when it comes to Hard Drive options it says that no drive was detected and i should try search for drivers. It shows me this window: Screenshot from web Now i cant find the right drivers for this netbook to continue with the installation. The laptop has the newest BIOS - 1.15, it is reset to factory default settings except that i enabled the Boot Menu prompt with F12. From the Acer Support Website i've downloaded the SATA AHCI Driver and the Chipset Driver. I unpacked both to a USB flashdrive in seperate folders. When i select the SATA AHCI Driver it does not find any drivers. When i uncheck the checkbox "Hide drivers that are not compatible with hardware on this computer" it shows one driver: Acer HWID (path_to\1.inf). When i continue with this driver i got an error message that says something like: No new devices found. Check if the driver files are on the installation disk. When i show him the Chipset Driver it sees a lot more driver. When i uncheck the checkbox "Hide drivers that are not compatible with hardware on this computer" it show some drivers: Intel N10 Family DMI Bridge Intel N10/ICH7 Family PCI Express Root Port Intel N10/ICH7 SMBUS Controller Intel N10/ICH7 Family USB Universal Host Controller Intel N10/ICH7 Family USB2 Enhanced Host Controller Intel N10/ICH7 Family Interface LPC Controller When i uncheck this checkbox i get a lot more drivers, and some SATA Drivers but the also do not work. I get the same error message as before. Can someone help me find a driver that should work or am i doing anything else wrong?

    Read the article

  • Laptop Most Likely to Have Good Driver Support

    - by ShabbyDoo
    Through numerous bad experiences, I have learned that the most likely cause of laptop "failure" is the lack of updated drivers for new operating systems. As an example, I have a perfectly good Thinkpad T42 at home which runs Windows 7 just fine for my purposes except that no compatible ATI video drivers are available, and the generic drivers have flicker effects. I recently saw an ASUS laptop which looked quite nice except that I would be beholden to them to release ATI video driver updates customized for it. And, I can't trust them to do that for more than six months. What laptops (manufacturer/line) should I consider so that I could expect at least a couple years of frequent updates? I plan on running Windows 7 and installing whatever successor comes out. I like Intel components (especially WiFi) because I can install their drivers directly from them, and they have a long history of providing updates for years after shipping a particular component. More generally, components from companies which are likely to update drivers frequently are good as long as I can install the component manufacturer-provided drivers without laptop-specific customization (like the ATI drivers). Also, if a component can be replaced easily, I am less concerned. For example, Dell stopped pumping out updated drivers for one of its mini-PCI WiFi cards. The solution was to buy an Intel replacement on eBay for $12! That's fine. I can deal with that. So, what laptops should I consider so that I'm not likely to be stuck between a rock and a hard place?

    Read the article

  • Windows Update broke Wirless driver - Can't get it working again

    - by private_meta
    I naively installed a driver update incoming from Windows Updates yesterday. That caused my Wifi on my Notebook (HP ELitebook 2740p) to break. The network is working as I tried it with my other mobile devices. When installing said driver, it told me that the installation failed. I tried to do a system restore, which did not help getting wifi connectivity back. The device said it was working, but did not get any wifi connection and did not discover any networks. What I tried next was to uninstall the device from my Device Manager and install either the current drivers found through windows, then I tried the same with the current drivers on the HP driver page. both of those attempts failed. It always tells me that installation failed when I uninstall and reinstall drivers. If I try to update the broken driver via internet, it tells me it is up to date, and in the device manager it still views as broken. Next, I 'played' around a bit and reinstalled drivers, and I managed to install drivers from 2012, and when trying to update drivers manually and picking drivers that match the device, it lets me choose between drivers from 2010 and 2014. 2014 would be the current one, picking the 2010 driver leads to the driver being accepted. However, no wireless network can be found. I'm pretty much out of ideas by now, short of reinstalling. The only option I can still think of was that the device broke at the exact moment I installed the new windows driver, but I find that a bit unlikely. Any help would be appreciated fixing this issue.

    Read the article

  • How to install OpenCV without nVidia drivers

    - by Subhamoy Sengupta
    I have a laptop with on-board Intel graphics. I have been using OpenCV for years with this machine and I have managed to avoid manual compilation so far. But in Ubuntu 13.10, when I try to install libopencv-dev from the repositories, it brings along libopencv-ocl, which seems to be dependent on nvidia drivers. Letting the driver install messes up my xserver completely and when I do glxinfo afterwards, I get this: name of display: :0.0 Xlib: extension "GLX" missing on display ":0.0". Xlib: extension "GLX" missing on display ":0.0". Xlib: extension "GLX" missing on display ":0.0". Xlib: extension "GLX" missing on display ":0.0". Xlib: extension "GLX" missing on display ":0.0". Error: couldn't find RGB GLX visual or fbconfig Xlib: extension "GLX" missing on display ":0.0". Xlib: extension "GLX" missing on display ":0.0". Xlib: extension "GLX" missing on display ":0.0". Xlib: extension "GLX" missing on display ":0.0". Xlib: extension "GLX" missing on display ":0.0". Xlib: extension "GLX" missing on display ":0.0". Xlib: extension "GLX" missing on display ":0.0". To solve this, I purge all nVidia drivers and reinstall xserver, much like it has been suggested here, and when I purge the nvidia drivers, OpenCV development libraries are also removed, as apt-get tells me they are no longer needed. This is foreign to me, because I expected a warning that I have installed packages that depend on this, but how can removing a dependency automatically remove the package I installed without warnings or asking? I understand it has something to do with nVidia being the provider of the libopencv-ocl in the repo. How could I get around it? I would rather not compile OpenCV if I can help it. I have seen similar questions, but not a suitable answer.

    Read the article

  • Installed Ubuntu on a Intel I5 3330 (over a dh 77eb motherboard), networking fails

    - by Siddharth
    To my surprise network fails after Ubuntu installs. modprobe e1000, did not get networking to kick off modprobe e1000e, too did not load Searched for the drivers on the intel site, no linux drivers listed. lspci reports 00:19.0 Ethernet controller [0200]: Intel Corporation Device [8086:1503] (rev 04) Any idea on how to proceed ? Is there a place where I can map driver names (like e1000, e1000e) with the model numbers ?

    Read the article

  • Accidentally deleted /etc/X11/xorg.conf.original, and now log in no longer works

    - by Cester Nilap
    I accidentally deleted xorg.conf.original-0; xorg.conf.fglrx xorg.conf.fglrx-0-1, after I tried to install fglrx drivers on the graphics card, which in fact worked on 13.04 and now as I went to 13.10 has not worked. Now I can just switch to a new TTY with: Ctrl + Alt + F2 I found this which is for nVidia cards TO install the fglrx drivers for graphic card I used this tutorial Is there any possibility that I can recover, replace, rebuilb that xorg.conf.original-0, and if exists any possibility where I could start from.

    Read the article

  • Can a version update (from 12.04 to 12.10) give driver problems?

    - by Ruben
    I'm new here. I recently installed Ubuntu 12.04 even though I'm not completely new to the Linux World, but I wanted to ask a thing: I had a problem in video drivers, and I fixed it by a complete reinstallation of the whole operating system. If I install the new version using the update manager (so without a complete reinstallation), will my drivers be the same as they are? And what about my data? Thanks, and sorry for my very bad english .<

    Read the article

  • Cannot install "ATI/AMD proprietary FGLRX graphics driver" (SystemError)

    - by Fisherman John
    I have just installed a fresh copy of 12.04.1 64bit. I formatted my PC completely and enabled updates during the installation. After the installation was complete, I went on updating my software. However, when I wanted to install the additional drivers using the Additional Drivers tool (namely "ATI/AMD proprietary FGLRX graphics driver"), it gave me this error: SystemError: E:Unable to correct problems, you have held broken packages. The same error shows up if I try installing the post-release updates driver. Installing the drivers from the terminal results in this output: XXXXXX:~$ sudo apt-get install fglrx [sudo] password for XXXXX: Reading package lists... Done Building dependency tree Reading state information... Done Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: fglrx : Depends: lib32gcc1 but it is not going to be installed Depends: libc6-i386 but it is not going to be installed E: Unable to correct problems, you have held broken packages." I get this using "sudo apt-get update": http://pastebin.com/AWAtDXjY But "sudo apt-get install fglrx" still get me this error: http://pastebin.com/RYM55bVN & "sudo apt-get -f install fglrx" gives me this error: http://pastebin.com/xxekajvP Any help would be greatly appreciated. (Please note that I'm new to Linux, coming directly from Windows. I have tried Ubuntu twice or so before, but it was not for a long period of time. The drivers got installed smoothly the few times I've tried Ubuntu, but post-release updates never worked for me.) [I am going to work now, so I can only answer from my phone. Can't really test any new solutions you may give me until ~10 hours from now on. Maybe more.] @stonedsquirrel When I try to run that command, I get this error: "XXXXXX:~$ sudo apt-get install fglrx [sudo] password for XXXXX: Reading package lists... Done Building dependency tree Reading state information... Done Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: fglrx : Depends: lib32gcc1 but it is not going to be installed Depends: libc6-i386 but it is not going to be installed E: Unable to correct problems, you have held broken packages." ie. I get the same error. ( I am Fisherman John, dunno how to login & thereby respond to your comment again _ )

    Read the article

  • Accidentally deleted /etc/X11/xorg.conf.original, and now login no longer works

    - by Cester Nilap
    I accidentally deleted xorg.conf.original-0; xorg.conf.fglrx xorg.conf.fglrx-0-1, after I tried to install fglrx drivers on the graphics card, which in fact worked on 13.04 and now as I went to 13.10 has not worked. Now I can just switch to a new TTY with: Ctrl + Alt + F2 I found this which is for nVidia cards TO install the fglrx drivers for graphic card I used this tutorial Is there any possibility that I can recover, replace, rebuilb that xorg.conf.original-0, and if exists any possibility where I could start from.

    Read the article

  • Should I install the proprietary (Restricted) driver?

    - by Hailwood
    I have a Sony Vaio E series laptop with the AMD Radeon™ HD 7650M. Everything seems to be working fine, but ubuntu is telling me that I could install the restricted driver. My basic question is, what would I gain/lose from installing this driver? Also, It lists two drivers: The fglrx driver, and then the post-release updates fglrx driver. if I was to use the restricted drivers which one would I use?

    Read the article

  • ubuntu switched back to ubuntu-2d in 12.04

    - by ved2254
    This problem may have been reported earlier but I was unable to find a solution to this. after trying to install Nvidia drivers my Ubuntu session changed to ubuntu-2d and I am unable to restore it to Ubuntu 3d. Which drivers I may need to install/remove to solve this problem? For further reference, heres a pic of how my workspace switcher looks like when changing workspaces. I would like it to be as it was when Ubuntu was first installed.

    Read the article

  • About to smash my keyboard!! Ubuntu 13.1 issues with AMD driver & Audio

    - by DNex
    Let me preface with saying that this is my 2nd day on Linux. I really want to make it work but these issues are driving me up the wall! I've done exhaustive google searches but have not been able to figure anything out. I am on Ubuntu 13.10, my graphics card is AMD Radeon HD4200. My sound card is a realtek HDMI. I've tried downloading and installing both drivers but nothing works. Graphics card: When I run the .run file (from http://www2.ati.com/drivers/legacy/amd-driver-installer-catalyst-13.1-legacy-linux-x86.x86_64.zip) I get an error. I check the fglrx-install log and it says this: Check if system has the tools required for installation. fglrx installation requires that the system have kernel headers. /lib/modules/3.11.0-12-generic/build/include/linux/version.h cannot be found on this system. One or more tools required for installation cannot be found on the system. Install the required tools before installing the fglrx driver. Optionally, run the installer with --force option to install without the tools. Forcing install will disable AMD hardware acceleration and may make your system unstable. Not recommended. Audio: Since my first install I've had no audio. I've tried everything outlined in this site: http://itsfoss.com/fix-sound-ubuntu-1304-quick-tip/ to no avail. I've download the linux drivers from Realtek HDMI audio but have had no luck. Any help would be extremely appreciated.

    Read the article

  • Screen Resolution stuck at 640x480 after installing Bumblebee

    - by Saurabh Agarwal
    I have a Dell XPS 15z laptop. As you can see here, there are some issues with NVidia drivers. The site recommends installation of Bumblebee (instructions given in the link). I am posting it again for ease: $ sudo add-apt-repository ppa:bumblebee/stable $ sudo apt-get update && sudo apt-get upgrade $ sudo apt-get install bumblebee bumblebee-nvidia $ sudo usermod -a -G bumblebee $USER After restarting the computer however, the screen resolution was stuck at 640x480 and I got the following error message as soon as I logged in: **Could not apply the stored configuration for monitors** none of the selected modes were compatible with the possible modes: Trying modes for CRTC 63 CRTC 63: trying mode 640x480@60Hz with output at 1366x768@60Hz (pass 0) CRTC 63: trying mode 640x480@60Hz with output at 1366x768@60Hz (pass 1) Trying modes for CRTC 64 CRTC 64: trying mode 640x480@60Hz with output at 1366x768@60Hz (pass 0) CRTC 64: trying mode 640x480@60Hz with output at 1366x768@60Hz (pass 1) Prior to the update, the display was absolutely normal and thus there is no doubt about the cause. Albeit, there was no support for graphic drivers. In case it helps, some features of graphics drivers seem to be functional after bumblebee, ie, all features are in order except for the resolution. And if the resolution can't be fixed, please suggest a way to retract the changes so that atleast the prior state may be reachieved. Any help in the matter would be highly appreciated.

    Read the article

  • BCM4306, b43 legacy driver installed, but "firmware missing" error

    - by ScrollerBlaster
    I have the following wireless hardware on a Compaq evo N600c laptop running lubuntu latest. ciaran@compaq:~$ lspci -vvnn | grep 14e4 03:00.0 Network controller [0280]: Broadcom Corporation BCM4306 802.11b/g Wireless LAN Controller [14e4:4320] (rev 03) Following the instructions from here : http://www.linuxwireless.org/en/users/Drivers/b43#b43_and_b43legacy I opted for the legacy firmware installer, following instructions for internet install to the letter (with no errors). i.e. I successfully installed sudo apt-get install firmware-b43legacy-installer In the nm-applet I now get Wireless networks device not ready (firmware missing) I open up Additional Drivers, but the list is empty. I have commented out this line in /etc/modprobe.d/blacklist.conf #blacklist bcm43xx Contents of firmware dir: ciaran@compaq:/etc/modprobe.d$ sudo ls /lib/firmware/b43legacy/ [sudo] password for ciaran: a0g0bsinitvals2.fw a0g0initvals5.fw b0g0bsinitvals2.fw b0g0initvals5.fw ucode11.fw ucode5.fw a0g0bsinitvals5.fw a0g1bsinitvals5.fw b0g0bsinitvals5.fw pcm4.fw ucode2.fw a0g0initvals2.fw a0g1initvals5.fw b0g0initvals2.fw pcm5.fw ucode4.fw Edit: from dmesg: [ 4460.193382] b43-phy0 ERROR: Firmware file "b43/ucode5.fw" not found [ 4460.193393] b43-phy0 ERROR: Firmware file "b43-open/ucode5.fw" not found [ 4460.193401] b43-phy0 ERROR: You must go to http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware and download the correct firmware for this driver version. Please carefully read all instructions on this website. Yours in hope.

    Read the article

< Previous Page | 8 9 10 11 12 13 14 15 16 17 18 19  | Next Page >