Search Results

Search found 4690 results on 188 pages for 'k ran'.

Page 12/188 | < Previous Page | 8 9 10 11 12 13 14 15 16 17 18 19  | Next Page >

  • Can't (re)Install VLC (removed by update{again})

    - by David matthews
    I use VLC a lot, And When 2.0 came out Ubuntu did not update to that version, the REPO had the older version even months later, So I added the daily repo: http://ppa.launchpad.net/videolan/stable-daily/ubuntu and that worked for a while, after a few months later I received a 'Distribution upgrade' and when I installed it, it removed VLC. when I tried to re-install it gave me a bunch of unmet dependency's, so I disabled the source, ran apt-get update, and tried to install the older VLC, that did not work either. I eventually found a web page, and it helped me get it working, and I was also able to get the 'Stable Daily' working too But last night, I got another 'disto upgrade' and it uninstalled VLC again. when I try to reinstall from daily I get: The following packages have unmet dependencies: vlc : Depends: fonts-freefont-ttf but it is not installable Depends: vlc-nox (= 2.0.3+git20121005+r392-0~r42~precise1) but it is not going to be installed Depends: libvlccore5 (>= 2.0.0) but it is not going to be installed Recommends: vlc-plugin-notify (= 2.0.3+git20121005+r392-0~r42~precise1) but it is not going to be installed Recommends: vlc-plugin-pulse (= 2.0.3+git20121005+r392-0~r42~precise1) but it is not going to be installed E: Unable to correct problems, you have held broken packages. and from the default source: vlc : Depends: vlc-nox (= 2.0.3-0ubuntu0.12.04.1) but it is not going to be installed Depends: libvlccore5 (>= 2.0.0) but it is not going to be installed Recommends: vlc-plugin-notify (= 2.0.3-0ubuntu0.12.04.1) but it is not going to be installed vlc-plugin-pulse : Depends: vlc-nox (= 2.0.3-0ubuntu0.12.04.1) but it is not going to be installed Depends: libvlccore5 (>= 2.0.0) but it is not going to be installed E: Unable to correct problems, you have held broken packages. (and yes, I ran apt-get update after turning off daily) Any Ideas? (ubuntu 12.04 64bit)

    Read the article

  • "Bootmgr is missing...." Upon reboot [closed]

    - by Gabe
    Possible Duplicate: Install/running ubuntu on extarnal HDD with a windows laptop? Ill take you through the steps I did. Sorry if this question has already been resolved, I'm new to Ubuntu and forums in general. I have 2 internal HDDs in my computer, both with Win7. One HDD is my mothers, the other is mine. I did this because she didn't want my games on her computer, and my PCs motherboard took a crap on me, so I set up a dual boot. I also have an external HDD. This is what I am trying to install Ubuntu 12.04 on. I formatted the drive by right clicking it, then selecting "Format". It is now in NTSF format. I downloaded the Windows installer, ran it, and selected "I:/" (my externl hdd) as the install location. The download and installation ran smoothly, and it gave me the reboot prompt. I selected "Reboot now" and my PC rebooted. I was then interrupted by the "Bootmgr is missing. Press CTRL + ALT + DEL TO REBOOT" message. NOTE: I would like to use my HDD for a FULL Ubuntu installation, not the Live (i think thats what its called). I want all my files and settings from Ubuntu saved to the External drive as if it was my only drive. If you need more information just ask. Any help would be appreciated. Thanks in advance.

    Read the article

  • Lost files after installing Ubuntu

    - by Joshua Rosato
    I installed Ubuntu on my laptop over windows, I had 2 partitions on one hard disk. It seems like my second partition is gone with all my files. How can I recover the old files? They weren't on the same partition as Windows. I read that the partition has probably just not been mounted so ran sudo fdisk -l to find all the partitions and then ran sudo mount, however I can't tell from the results of sudo mount what is not mounted and I am also unsure how to mount it once I find the unmounted partition. sudo fdisk -l - Results Disk /dev/sda: 250.1 GB, 250059350016 bytes 255 heads, 63 sectors/track, 30401 cylinders, total 488397168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0002c6dc Device Boot Start End Blocks Id System /dev/sda1 * 2048 486322175 243160064 83 Linux /dev/sda2 486324222 488396799 1036289 5 Extended /dev/sda5 486324224 488396799 1036288 82 Linux swap / Solaris sudo mount - Results /dev/sda1 on / type ext4 (rw,errors=remount-ro) proc on /proc type proc (rw,noexec,nosuid,nodev) sysfs on /sys type sysfs (rw,noexec,nosuid,nodev) none on /sys/fs/cgroup type tmpfs (rw) none on /sys/fs/fuse/connections type fusectl (rw) none on /sys/kernel/debug type debugfs (rw) none on /sys/kernel/security type securityfs (rw) udev on /dev type devtmpfs (rw,mode=0755) devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620) tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755) none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880) none on /run/shm type tmpfs (rw,nosuid,nodev) none on /run/user type tmpfs (rw,noexec,nosuid,nodev,size=104857600,mode=0755) none on /sys/fs/pstore type pstore (rw) systemd on /sys/fs/cgroup/systemd type cgroup (rw,noexec,nosuid,nodev,none,name=systemd) gvfsd-fuse on /run/user/1000/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,user=joshy1)

    Read the article

  • /etc/resolv.conf nameserver fd00::1

    - by user88631
    My /etc/resolv.conf constantly get a mysterious entry, i run a home network with ipv6 provided by ravd, the interface is auto-configured by Network manager (all name server lookups are lost when this line is first in my /etc/resolv.conf) . Dynamic resolv.conf(5) file for glibc resolver(3) generated by resolvconf(8) **# DO NOT EDIT THIS FILE BY HAND -- YOUR CHANGES WILL BE OVERWRITTEN** nameserver fd00::1 nameserver 192.168.1.1 search home.int When ping is working cat /etc/resolv.conf # Dynamic resolv.conf(5) file for glibc resolver(3) generated by resolvconf(8) # DO NOT EDIT THIS FILE BY HAND -- YOUR CHANGES WILL BE OVERWRITTEN nameserver 192.168.1.1 search home.int So something is putting fd00::1 at start of file, not if I ping6 fd00::1 I get Destination unreachable: Administratively prohibited To diagnose this I ran the router with single cable to connected to ubuntu machine. Ran tcpdump + restarted network on ubuntu. "tcpdump ip6 -e -i eth0 | grep fd00" finds nothing, it's not being advertised via the network.. The only hit I got was when an upstream router refused a connection attempt from the ubuntu machine to fd00::1. I have also switched on debug for network manager & it appears to set the mystery line.. 15:22:14 storage-pc NetworkManager[349]: <info> Activation (eth0) Stage 5 of 5 (IPv4 Commit) complete. 15:22:14 storage-pc NetworkManager[349]: <warn> dnsmasq exited with error: Other problem (5) 15:22:14 storage-pc NetworkManager[349]: <debug> [1346822534.281528] [nm-dns-manager.c:598] update_dns(): updating resolv.conf 15:22:14 storage-pc NetworkManager[349]: <debug> [1346822534.281875] [nm-dns-manager.c:719] update_dns(): DNS: plugin dnsmasq ignored (caching disabled) 15:22:14 storage-pc NetworkManager[349]: <info> ((null)): writing resolv.conf to /sbin/resolvconf 15:22:14 storage-pc dbus[2184]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher' 15:22:14 storage-pc dnsmasq[2875]: reading /etc/resolv.conf 15:22:14 storage-pc dnsmasq[2875]: using nameserver 192.168.1.1#53 15:22:14 storage-pc dnsmasq[2875]: using nameserver fd00::1#53 Any suggestions on how to find out where this comes from?

    Read the article

  • How to get hp printer to select correct trays on samba shared printer

    - by dgermann
    My first post here. Clean install of 12.04.1. Previously 10.04. Have been running a p2035n printer without problem. Now, no matter what paper tray I select it prints to the top "by-pass" feeder--not the lower main tray. And when I select to print to manual feed, it does not wait for me to put in paper (like it used to), but prints immediately. The printer is on a samba share and is physically plugged into a WinXP machine. Its uri is smb:///computername/p2035n. I have tried several of the offered drivers for this hp machine, and even tried generic-laser. Same result on all. Here are some other things I have tried (losing 2-3 hours of my time!): hp-check -t reports “error: User needs to be member of group 'lp' to enable print, scan & fax. ” and “warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend to function in HPLIP.” needed to download HPLIP 3.12.11 followed http://hplipopensource.com/hplip-web/install/install/index.html sh hplip-3.12.11-run says that before setup logout and then on login run hp-setup hp-setup could not find the printer ran hp-check -t again, found I was not in group lp ran hp-check --fix and it fixed that problem, asks for reboot rebooted after running update manager (new kernel) and hp-check -t shows no errors this time all the tray selections end up on the bypass tray hp-setup still cannot find the printer So is there a way to make this work? Thanks! :- Doug.

    Read the article

  • Input/output error, when trying to install on netbook [closed]

    - by Ben
    Been trying to install ubuntu on my Samsung NB30 netbook, but I have been running into the same error over and over again. [Errno 5] Input/output error This particular error is often due to a faulty CD/DVD disk or drive, or a faulty hard disk. It may help to clean the CD/DVD, to burn the CD/DVD at a lower speed, to clean the CD/DVD drive lens (cleaning kits are often available from electronics suppliers), to check whether the hard disk is old and in need of replacement, or to move the system to a cooler environment. I'm installing from the USB bootable version, I get the exact same error at the exact same point when trying to install both ubuntu desktop and ubuntu desktop remix. I've tried redownloading both ISOs twice and I've tried two different USB sticks (one being completely new). I've tried installing from with in an ubuntu live session and I get the exact same problem. I've ran a bootable memtest and everything passes with no errors, I've also ran a dmesg in terminal after the installer fails here's what it reported - http://bit.ly/exAQRR Thanks in advance! EDIT: I know this was ages ago, but to anyone out there with the same issue, the problem turned out to be the downloaded image, my internet is poor at the best of times and the ISO failed the MD5sum check, if this happens to you I recommend you download the ISO image by torrent, it'll check the integrity of the file is maintained.

    Read the article

  • Ubuntu 12.04 Freezes at Bootup

    - by Ryan Yu
    I have an Acer Aspire One Model AO722, that has a dual-boot configuration with Windows 7 Home Premium and Ubuntu 12.04. Processor: AMD C-50, 1.00GHz 2.00GB ram, 64-bit, AMD Radeon HD 6250 Graphics. I installed Ubuntu two days ago, and since then, loading it has been sporadic. Windows 7 still loads just fine, but Ubuntu will sometimes freeze. First time I booted Ubuntu up, it ran no problem. Worked with it for half an hour, then shut down the computer. The second time I booted it up, it froze after ten minutes when I was trying to set up Thunderbird. Third time, same thing. Fourth time, it froze about 5 minutes after bootup when I was trying to connect to my wifi. Fifth time, it ran no problems for about 5~ hours. Then, three consecutive times I've restarted (what is it, the 6th, 7th, and 8th times?) it has gotten to the login screen, I've entered my password, all the text on the page disappears as if its going to load my desktop, and it freezes. A minute ago when I booted Ubuntu up for the 9th time, it loaded the desktop fine. Who knows if it'll crash soon; probably, though. Any ideas?

    Read the article

  • "The protocol 'net.msmq' is not supported."

    - by Randolpho St. John
    OMG, a new lesson! Will wonders never cease? So I ran into an interesting issue setting up a WCF service to consume an MSMQ queue. I won't bother you with the details of how to actually build a WCF/MSMQ service; there are plenty of tutorials on the subject. I want to share with you an interesting error that I ran into and the surprisingly simple fix. The error occurs when attempting to generate a Service Reference or even simply browsing to the WSDL of your WCF/MSMQ service in the form of a YSOD with the following error: "The protocol 'net.msmq' is not supported." After a lot of Googling on the subject turning up plenty of questions with the same error but no answers. So I went digging into some application level config files on a server that already had a WCF/MSMQ service successfully set up by the network admin, and the answer was amazingly simple: If you are hosting an MSMQ/WCF service in IIS, you have to tell IIS to allow net.msmq protocol. It's in the advanced settings for the application or site in which you are hosting the service. .... aaaand, that's it.

    Read the article

  • Installing Ubuntu along with windows 7 on shrunk partition

    - by Thabo
    I am new to Ubuntu OS and ask Ubuntu community. First this is not a duplicate question. Actually this a question which is a summery of all solutions and questions were posted in this community, related to Install Ubuntu along with Windows 7. I have bought a new Hp laptop with its original windows 7.I want to install Ubuntu along with windows 7 64 bit. I ran the Ubuntu 12.4 Desktop installation CD. But Ubuntu installer doesn't show the "along with windows 7 option"only it is showing two options. I read some questions and answers posted on this community. Specially following link Ubuntu 12.04 does not see windows already install on my computer (dual installation) I tried following thinks, I ran the terminal in live CD and tried sudo dmraid -rE command and dmraid remove command .But terminals says there is no dmraid partitions. So I tried another scenario checked my partitions with g parted.There are some partitions labeled C,HP tools,Recovery and System. C is containing windows 7 Files. So I shrank the volume of C Drive. Now I have 50000Mb of unallocated disk. I tried with Gparted to create a partition on that allocated space.It says some thing that you can't create more than four primary partition.Of course all other four partitions were created on widows are actually type of primary partition. So I went back to Windows 7 and tried to create a new volume on unallocated space.But unfortunately it says,If i create a new volume it will be the type of Dynamic partition.It says we cant boot another OS from that partition. So i cancelled that step. Now i have 50000Mb unallocated space but how can i install Ubuntu on that partition without harming the existing Windows 7? Because still I have only two options: Erase and install Ubuntu. Try something else. (I can see my unallocated space by going to "something else" option.)

    Read the article

  • Data Center Modernization: Harness the power of Oracle Exalogic and Exadata with PeopleSoft

    - by Michelle Kimihira
    Author: Latha Krishnaswamy, Senior Manager, Exalogic Product Management   Allegis Group - a Hanover, MD-based global staffing company is the largest privately held staffing company in the United States with more than 10,000 internal employees and 90,000 contract employees. Allegis Group is a $6+ billion company, offering a full range of specialized staffing and recruiting solutions to clients in a wide range of industries.   The company processes about 133,000 paychecks per week, every week of the year. With 300 offices around the world and the hefty task of managing HR and payroll, the PeopleSoft system at Allegis  is a mission-critical application. The firm is in the midst of a data center modernization initiative. Part of that project meant moving the company's PeopleSoft applications (Financials and HR Modules as well as Custom Time & Expense module) to a converged infrastructure.     The company ran a proof of concept with four different converged architectures before deciding upon Exadata and Exalogic as the platform of choice.   Performance combined with High availability for running mission-critical payroll processes drove this decision.  During the testing on Exadata and Exalogic Allegis applied a particular (11-F) tax update in production environment. What job ran for roughly six hours completed in less than 1.5 hours. With additional tuning the second run of the Tax update 11-F reduced to 33 minutes - a 90% improvement!     Not only that, the move will help the company save money on middleware by consolidating use of Oracle licensing in a single platform.   Summary With a modern data center powered by Exalogic and Exadata to run mission-critical PeopleSoft HR and Financial Applications, Allegis is positioned to manage business growth and improve employee productivity. PeopleSoft applications run on engineered systems platform minimizing hardware and software integration risks. Additional Information Product Information on Oracle.com: Oracle Fusion Middleware Follow us on Twitter and Facebook Subscribe to our regular Fusion Middleware Newsletter

    Read the article

  • Ubuntu 12.04 Frequent Kernel Panics

    - by Jordan Johns
    Dealing with what seems to be quantum behavior here. I'm having frequent Kernel panics and the problem is very hard to locate. To cut to the chase of what is going on I am essentially getting this screen: This occurs always after login (login screen is fine, can go into my TTY's and everything). But once I log in I have anywhere from 0 (instant) to 10 seconds before everything grinds to a halt and freezes. The only way I found out that it was a kernel panic was going into a TTY while it happens. At first, I figured something must be wrong with memory. Ran memtest86, full standard test. No errors. OK. CPU problem? Windows works fine, ran prime95 and a bunch of other torture tests for many hours. Drive problem? Nope. fsck reports no problems and the smart status is ok. Overclocking problem? Nope. Windows is working fine, and I also reset the bios to prove the point it was not the cause. At a loss here, even trying to reinstall the thing it gives me the same problem even attempting to install ubuntu (like right after you try to select "install ubuntu" or "try ubuntu first before installing"). Anyone have any thoughts? Its very bizarre, its as if my system hates linux and is trying to tell me not to use it (that would be a terrible reality). Thanks!

    Read the article

  • File doesn't exist when trying to change permissions following the avasys image scan manual

    - by Howard Graham
    I was finally able to connect to avasys.jp and downloaded and installed iscan_2.28.1-3.ltdl7_amd64.deb iscan-data_1.13.0-1_all.deb. The programs appeared to install correctly. I then ran sane-find-scanner and got back: found USB scanner (vendor=0x04b8, product=0x012d) at libusb:001:003 I then ran lsusb and got back: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 003: ID 04b8:012d Seiko Epson Corp. Perfection V10/V100 (GT-S600/F650) Bus 001 Device 004: ID 03f0:4817 Hewlett-Packard Bus 002 Device 002: ID 093a:2510 Pixart Imaging, Inc. Optical Mouse the avasys image scan manual instructed me to run chmod 0666 /proc/bus/usb/001/003 which returned chmod: cannot access `/proc/bus/usb/001/003': No such file or directory In 12.04, no such directory exists. 12.04 appears to deal with USB in another way. What must I do to get the usb port 001/003 recognized by xsane and sane as the port where the scanner can be located? What must I do to continue installing the scanner?

    Read the article

  • Laptop runs HOT after 12.10 upgrade!

    - by dinkelk
    I was running 12.04 for 6 months, my laptop ran almost silently and cool enough to hold on my lap. I updated to 12.10 and now my computer gets too hot to hold on my lap and the fan is constantly running on full blast. This is the output of sensors: acpitz-virtual-0 Adapter: Virtual device temp1: +84.0°C (crit = +99.0°C) coretemp-isa-0000 Adapter: ISA adapter Physical id 0: +84.0°C (high = +86.0°C, crit = +100.0°C) Core 0: +74.0°C (high = +86.0°C, crit = +100.0°C) Core 1: +72.0°C (high = +86.0°C, crit = +100.0°C) Core 2: +75.0°C (high = +86.0°C, crit = +100.0°C) Core 3: +84.0°C (high = +86.0°C, crit = +100.0°C) radeon-pci-0100 Adapter: PCI adapter temp1: +76.0°C I have an HP Pavilion dv6, i7, amd radeon graphics. Please let me know if you need additional information. What could be different between the two Ubuntu additions that caused such a drastic change? Edit 1: Per @Paul's suggestion, I ran htop to try to narrow down the problem. Here is the result! This is about 10 minutes after boot-up, htop, yakuake, and a chrome page with 1 tab opened to this question are all that I have manually opened. The most taxing program to the CPU is htop itself. I think that the problem must lie elsewhere; my temps are already up to ~65C for the CPU and ~69C for the GPU, with nearly 0% CPU usage.

    Read the article

  • MVC: Nasty __o not declared

    - by xamlnotes
    I ran into this little error with MVC where a bunch of errors showed up about  __o  not declared. This was driving me nuts. Then I ran across this link that solved it. http://stackoverflow.com/questions/750902/how-do-i-get-rid-of-o-is-not-declared So, the solution is to put this into the top of the page like VS does for your site.master. <%-- The following line works around an ASP.NET compiler warning --%> <%: ""%> But what about other pages? Lets say you have a view that’s using your site master and that view is throwing this error. Just add the items into the content section where the error occurs like so: <asp:Content ID="indexContent" ContentPlaceHolderID="MainContent" runat="server"> <%-- The following line works around an ASP.NET compiler warning --%> <%: ""%>   Then add the rest of your code. That seems to fix it and its pretty simple too.

    Read the article

  • OUCH! Laptop running SUPER HOT after 12.10 upgrade!

    - by dinkelk
    I was running 12.04 for 6 months, my laptop ran almost silently and cool enough to hold on my lap. I updated to 12.10 and now my computer gets too hot to hold on my lap and the fan is constantly running on full blast. This is the output of sensors: acpitz-virtual-0 Adapter: Virtual device temp1: +84.0°C (crit = +99.0°C) coretemp-isa-0000 Adapter: ISA adapter Physical id 0: +84.0°C (high = +86.0°C, crit = +100.0°C) Core 0: +74.0°C (high = +86.0°C, crit = +100.0°C) Core 1: +72.0°C (high = +86.0°C, crit = +100.0°C) Core 2: +75.0°C (high = +86.0°C, crit = +100.0°C) Core 3: +84.0°C (high = +86.0°C, crit = +100.0°C) radeon-pci-0100 Adapter: PCI adapter temp1: +76.0°C I have an HP Pavilion dv6, i7, amd radeon graphics. Please let me know if you need additional information. What could be different between the two Ubuntu editions that caused such a drastic change? Edit 1: Per @Paul's suggestion, I ran htop to try to narrow down the problem. Here is the result! (left side of terminal) (right side of terminal) This is about 10 minutes after boot-up, htop, yakuake, and a chrome page with 1 tab opened to this question are all that I have manually opened. The most taxing program to the CPU is htop itself. I think that the problem must lie elsewhere; my temps are already up to ~65C for the CPU and ~69C for the GPU, with nearly 0% CPU usage.

    Read the article

  • Ubuntu 14.04 stalling. Problem with LightDM. Plymouth (and logging out) switches over to a black screen w/ white cursor

    - by Kage
    if its a duplicate, sorry. Couldn't find anything that fits my issue, much less that was on 14.04. I changed a few things recently. Switched to the Numix theme (from PPA), installed lm-sensors and psensor (ran all the I/O probes), Ubuntu Tweak, Pinta, and well, Team Fortress 2 on Steam. :P The system will get to the Plymouth 'ubuntu' screen, load load, all dots filled, switches over to LightDM, but wait! No LightDM. :I Just a blank screen with that white cursor. Can't switch out to tty1-6 - not sure if the Ctrl-Alt-F1 is disabled in 14.04 or if its literally just locked down. If I change any files, I have access to the filesystem from my Windows 8 partition. That's it. :/ I'm pretty familiar with Linux, especially Ubuntu, but I think I'm still at the point I know just enough to break things and not always how to fix 'em. Any help would be greatly appreciated. Thanks! UPDATE I was just able to get into my desktop briefly. I booted Ubuntu. When the black screen froze, I hit Ctrl-Alt-Del. When it started switching off, I hit Ctrl-Alt-Backspace. It rebooted. I plugged the second monitor in I had been using before the issue ever came about. Plymouth displayed on both. LightDM came up, displayed on both (it used to show only the ubuntu logo on the unfocused monitor though). I logged in just fine. Even ran some pending software updates. I logged out of the desktop though, and LightDM refused to show again. xP

    Read the article

  • &quot;The protocol 'net.msmq' is not supported.&quot;

    - by John Breakwell
    The “Lessons Learned” blog has an update covering the error message "The protocol 'net.msmq' is not supported." "The protocol 'net.msmq' is not supported." OMG, a new lesson! Will wonders never cease? So I ran into an interesting issue setting up a WCF service to consume an MSMQ queue. I won't bother you with the details of how to actually build a WCF/MSMQ service; there are plenty of tutorials on the subject. I want to share with you an interesting error that I ran into and the surprisingly simple fix. The error occurs when attempting to generate a Service Reference or even simply browsing to the WSDL of your WCF/MSMQ service in the form of a YSOD with the following error: "The protocol 'net.msmq' is not supported." After a lot of Googling on the subject turning up plenty of questions with the same error but no answers. So I went digging into some application level config files on a server that already had a WCF/MSMQ service successfully set up by the network admin, and the answer was amazingly simple: If you are hosting an MSMQ/WCF service in IIS, you have to tell IIS to allow net.msmq protocol. It's in the advanced settings for the application or site in which you are hosting the service. .... aaaand, that's it.

    Read the article

  • Setting console resolution in Ubuntu Server 13.10 within VMware

    - by user205625
    I've completed an install of Ubuntu Server 13.10 within VMware and am running into a problem configuring the console (non-graphical) resolution. When I was running Ubuntu Server 13.04, I ran into the same problem... posted the question here, which I later solved by editing /etc/default/grub thus: GRUB_CMDLINE_LINUX_DEFAULT="splash vga=789" I then ran sudo update-grub, sudo reboot and 13.04 stuck in a larger-size console mode... just what I wanted. BUT when I run the same commands in 13.10, during the reboot it changes to the new screen-res, BUT the screen stays black and I can't interact with it. I power down the VM, go back to a previous snapshot, and try again... and again. Since the hwinfo package is no longer available, I can't run sudo hwinfo --framebuffer to see what options are available. Ideas anyone? Here are the uncommented settings in my /etc/default/grub file at this moment: GRUB_DEFAULT=0 GRUB_HIDDEN_TIMEOUT=0 GRUB_HIDDEN_TIMEOUT_QUIET=false GRUB_TIMEOUT=10 GRUB_DISTRIBUTOR=lsb_release -i -s 2> /dev/null || echo Debian GRUB_CMDLINE_LINUX_DEFAULT="splash" GRUB_CMDLINE_LINUX="find_preseed=/preseed.cfg" GRUB_DISABLE_LINUX_RECOVERY=false GRUB_GFXMODE=800x600

    Read the article

  • How to properly uninstall/reinstall Ubuntu One on Windows XP?

    - by user73303
    I had previously installed an Ubuntu One client as a test on a Windows XP machine. Now I wanted to change the account for the client to a production one but had problems changing the email address so decided to do a reinstall. Ran uninstall. Downloaded ubuntuone-3.0.2-windows-installer.exe. It downloads, goes through the unpacking/install – strangely some of the messages say updating as if it was replacing something that was already there. I do not get the setup/signin screen. There is no ubuntu% processes running. The Program files/ubuntuone directory exists with data and dist folders. The U icon is on the desktop – pointing at ubuntuone/dist/ubuntuone-control-panel-qt.exe but this does not run. Ran uninstall again, deleted Program files/ubuntuone directory, removed any ubuntu entries for registry, rebooted. Downloaded install again - exactly the same as above. How can I uninstall Ubuntu One to get a clean reinstall? Or force the install to continue after downloading/unpacking?

    Read the article

  • No operating system found even when grub2 was reinstalled

    - by Cruzer
    I know there have been many variations on this question and have certainly tried to do my research. I don't really know what I'm doing so I would rather not take risks. I am trying to dual boot xubuntu and windows 7. I started out with xubuntu and just installed windows. Of course, the mbr got overwritten and windows didn't seem to recognize linux. So I booted to the live cd and rewrote the mbr. And of course, now I get the error "No Operating System Found" on startup. I have been following these tutorials to help me out. community.linuxmint.com/tutorial/view/245 unix.stackexchange.com/questions/96977/grub-wont-install ubuntuforums.org/showthread.php?t=2036730 Specifically, I ran these commands: # sdb2 is the partition with xubuntu sudo mount /dev/sdb2 /mnt # sdb1 is my boot partition sudo mount /dev/sdb1 /mnt/boot # not sure what this does, but ran it anyway... for i in /dev /dev/pts /proc /sys /run; do sudo mount -B $i /mnt$i; done sudo chroot /mnt #once chrooted grub-install /dev/sdb update-grub here's a link to my gparted https://www.dropbox.com/s/zpbbzh9z7k1l3pj/gparted.png EDIT--- didn't realize that the drive letters are different in the picture than in my code (its sda in the pic instead of sdb). I have been restarting a lot and sometimes the drive letters change and make my usb into sda.

    Read the article

  • No wubildr, No spaceleft, Boot Error and A previous installation was detected in D:\ubuntu. Please uninstall that before continuing

    - by tdc2bdc
    At first I was downloading Ubuntu 12.10 using Windows Installer, but I cancelled it after just 2-3 minutes and dowloaded 32-Bit ISO (ubuntu-12.10-desktop-i386). Then I created bootable USB Stick (new HP 210 v210 w) using Pendrivelinux (Universal-USB-Installer-1.9.1.4). I Formatted D Drive. (Both by Windows & EaseUS) I've set boot priority correctly. But after getting message "Boot Error", I ran wubi.exe directly from USB drive. Now the message is "A previous installation was detected in D:\ubuntu. Please uninstall that before continuing." I formatted D: again and performed disk check, surface test using EaseUS. It shows no error or bad sectors. Formatted & checked my pendrive too. Directly ran .iso. But same error keeps coming. I found way around above problems, by copying extracted .iso on D:\ and installing Ubuntu using wubi.exe and though on boot it was shown with Windows 7, selecting it caused following error Try hd(0,0): NTFS5 : No wubildr Try hd(0,1): NTFS5 : So, I uninstalled it and Reeinstalled it Now installation fails at around 7mins saying " An error occurred. No space left on device. For more info please see log file " My D: is a 9 GB partition. (99% Free) Ubuntu Site 12.10 says it needs around 4.5 GB. Now Trying it by extendin D: to 10 GB... Got No wubildr. Please help. tdc2bdc

    Read the article

  • Updating to linux-image-3.2.0-26-generic occupies all disk space

    - by user42228
    I just ran a normal update through the update manager that wanted to update me to linux-image-3.2.0-26-generic. The installation paused halfway with a message that the root was full. I checked the disk usage, and noticed that one of the newly installed files: /lib/modules/3.2.0-26-generic/modules.ccwmap took up 63GB(!). Compared to the previous version: /lib/modules/3.2.0-24-generic/modules.ccwmap that took up only 4KB it seems like something went awfully wrong! As mentioned the update was paused when i ran out of disk space. There is no option in the update dialog to cancel or perform rollback on the update. Is it asking for trouble to kill the update manager? Any ideas as to what went wrong, and what I can do to remedy it? It's only minimal how much space I can free on that partition (without deleting the above mentioned file). If it is any help, the update was paused after this: Examining /etc/kernel/postinst.d. run-parts: executing /etc/kernel/postinst.d/dkms 3.2.0-26-generic /boot/vmlinuz-3.2.0-26-generic

    Read the article

  • Ubuntu 14.04:LTS , HPLIP loses USB connection to HP laserjet

    - by Gareth
    This is my first post, so please let me know if i have inadvertanly broken any rules. Problem There seems to be a problem with HPLIP and USB connections in ubuntu 14.04LTS. After upgrading i managed to get the printing to work but today it has broken. Initial Issue (Solved) After upgrading to unbutntu 14.04 LTS my printer lHP LaserJet 1018 stopped printing (code=12) Looking through the Forumsthere are several issues with printitng and HPLIP so I was able to troubleshoot this. The steps I took were : Reran HPdoctor Ran hp-check Un-installed and installed the latest version of HPLIP (3.14.4) Checked the USB connections lsusb and lsusb-v Re-ran hpcheck Removed the printer from HPLIP Re-ran hpcheck Manually configued HPLIP to the printer hp-setup-g <xxx:yyy> And this worked HPLIP was able to see the printer in the USB , test page printed and was happily working for a few weeks. Current Issue Printer Not working However today my wife complains the printer is not working and checking see that although HPLIP has the same error code and did not seem to be able to see the printer although running lsusb could see the printer. Initially thought this may be due to usb given a new bus/device after being turned on and off and went to repeat the steps above at the moment still seeing an error in that the HPLIP is complaining that it cannot see the device **error: Device not found. Please make sure your printer is properly connected and powered-on.** current Observations lsusb output ## Bus 002 Device 007: ID 03f0:4117 Hewlett-Packard LaserJet 1018 sudo hp-check output *> "duan@duan-Lenovo-B550:~$ sudo hp-check [sudo] password for duan: Saving output in log file: /home/duan/hp-check.log HP Linux Imaging and Printing System (ver. 3.14.4) Dependency/Version Check Utility ver. 15.1 Copyright (c) 2001-13 Hewlett-Packard Development Company, LP This software comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to distribute it under certain conditions. See COPYING file for more details. Note: hp-check can be run in three modes: 1. Compile-time check mode (-c or --compile): Use this mode before compiling the HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies are installed to successfully compile HPLIP. Run-time check mode (-r or --run): Use this mode to determine if a distro supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball has the proper dependencies installed to successfully run. Both compile- and run-time check mode (-b or --both) (Default): This mode will check both of the above cases (both compile- and run-time dependencies). Full Output output of hp-setup -g 002:007 window box "device not found please make sure your printer is properly connected and powered on" duan@duan-Lenovo-B550:~$ sudo hp-setup -g 002:007 [sudo] password for duan: > HP Linux Imaging and Printing System (ver. 3.14.4) Printer/Fax Setup > Utility ver. 9.0 > > Copyright (c) 2001-13 Hewlett-Packard Development Company, LP This > software comes with ABSOLUTELY NO WARRANTY. This is free software, and > you are welcome to distribute it under certain conditions. See COPYING > file for more details. > > hp-setup[18461]: debug: param=002:007 hp-setup[18461]: debug: > selected_device_name=None Fontconfig error: > "/etc/fonts/conf.d/65-khmer.conf", line 14: out of memory Fontconfig > error: "/etc/fonts/conf.d/65-khmer.conf", line 23: out of memory > Fontconfig error: "/etc/fonts/conf.d/65-khmer.conf", line 32: out of > memory hp-setup[18461]: debug: Sys.argv=['/usr/bin/hp-setup', '-g', > '002:007'] printer_name=None param=002:007 jd_port=1 device_uri=None > remove=False Searching for device... hp-setup[18461]: debug: Trying > USB with bus=002 dev=007... hp-setup[18461]: debug: Not found. > hp-setup[18461]: debug: Trying serial number 002:007 hp-setup[18461]: > debug: Probing bus: usb hp-setup[18461]: debug: Probing bus: par > error: Device not found. Please make sure your printer is properly > connected and powered-on. hp-setup[18461]: debug: Starting GUI loop. .. USB lead Works with the Windows 7 laptop Printer Works with windows 7 laptop Questions Is this a Bug with HPLIP or an issue with laptop/printer? Supplementary question if it is a bug what information is needed and where should it be sent ? Any suggestions on how to get the printer to work correctly with Ubuntu 14.04LTS/HPLIP 13.4.3 so that it stays working ?

    Read the article

  • SQL SERVER – Service Broker and CAP_CPU_PERCENT – Limiting SQL Server Instances to CPU Usage

    - by pinaldave
    I have mentioned several times on this blog that the best part of blogging is the questions I receive from readers. They are often very interesting. The questions from readers give me a good idea what other readers might be thinking as well. After reading my earlier article Simple Example to Configure Resource Governor – Introduction to Resource Governor – I received an email from a reader and we exchanged a few emails. After exchanging emails we both figured out what is going on. It was indeed interesting and reader suggested to that I should blog about it.  I asked for permission to publish his name but he does not like the attention so we will just call him Jeff. I have converted our emails into chat for easy consumption. Jeff: Your script does not work at all. I think either there is a bug in SQL Server. Pinal: Would you please explain in detail? Jeff: Your code does not limit the CPU usage? Pinal: How did you measure it? Jeff: Well, we have third party tools for it but let us say I have limited the resources for Reporting Services and used your script described in your blog. After that I ran only reporting service workload the CPU is still used more than 100% and it is not limited to 30% as described in your script. Clearly something is wrong somewhere. Pinal: Did you say you ONLY ran reporting server load? Jeff: Yeah, to validate I ran ONLY reporting server load and CPU did not throttle at 30% as per your script. Pinal: Oh! I get it here is the answer - CAP_CPU_PERCENT = 30. Use it. Jeff: What is that, I think your earlier script says it will throttle the Reporting Service workload and Application/OLTP workload and balance it. Pinal: Exactly, that is correct. Jeff: You need to write more in email buddy! Just like your blogs, your answers do not make sense! No Offense! Pinal: Hmm…feedback well taken. Let me try again. In SQL Server 2012 there are a few enhancements with regards to SQL Server Resource Governor. One of the enhancement is how the resources are allocated. Let me explain you with examples. Configuration: [Read Earlier Post] Reporting Workload: MIN_CPU_PERCENT=0, MAX_CPU_PERCENT=30 Application/OLTP Workload: MIN_CPU_PERCENT=50, MAX_CPU_PERCENT=100 Example 1: If there is only Reporting Workload on the server: SQL Server will not limit usage of CPU to only 30% workload but SQL Server instance will use all available CPU (if needed). In another word in this scenario it will use more than 30% CPU. Example 2: If there is Reproting Workload and heavy Application/OLTP workload: SQL Server will allocate a maximum of 30% CPU resources to Reporting Workload and allocate remaining resources to heavy application/OLTP workload. The reason for this enhancement is for better utilization of the resources. Let us think, if there is only single workload, which we have limited to max CPU usage to 30%. The other unused available CPU resources is now wasted. In this situation SQL Server allows the workload to use more than 30% resources leading to overall improved/optimized performance. However, in the case of multiple workload where lots of resources are needed the limits specified in MAX_CPU_PERCENT are acknowledged. Example 3: If there is a situation where the max CPU workload has to be enforced: This is a very interesting scenario, in the case when the max CPU workload has to be enforced irrespective of the workload and enhanced algorithm, the keyword CAP_CPU_PERCENT is essential. It specifies a hard cap on the CPU bandwidth that all requests in the resource pool will receive. It will never let CPU usage for reporting workload to go over 30% in our case. You can use the key word as follows: -- Creating Resource Pool for Report Server CREATE RESOURCE POOL ReportServerPool WITH ( MIN_CPU_PERCENT=0, MAX_CPU_PERCENT=30, CAP_CPU_PERCENT=40, MIN_MEMORY_PERCENT=0, MAX_MEMORY_PERCENT=30) GO Notice that there is MAX_CPU_PERCENT=30 and CAP_CPU_PERCENT=40, what it means is that when SQL Server Instance is under heavy load under different workload it will use the maximum CPU at 30%. However, when the SQL Server instance is not under workload it will go over the 30% limit. However, as CAP_CPU_PERCENT is set to 40, it will not go over 40% in any case by limiting the usage of CPU. CAP_CPU_PERCENT puts a hard limit on the resources usage by workload. Jeff: Nice Pinal, you should blog about it. [A day passes by] Pinal: Jeff, it is done! Click here to read it. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology Tagged: Service Broker

    Read the article

  • The JavaOne 2012 Sunday Technical Keynote

    - by Janice J. Heiss
    At the JavaOne 2012 Sunday Technical Keynote, held at the Masonic Auditorium, Mark Reinhold, Chief Architect, Java Platform Group, stated that they were going to do things a bit differently--"rather than 20 minutes of SE, and 20 minutes of FX, and 20 minutes of EE, we're going to mix it up a little," he said. "For much of it, we're going to be showing a single application, to show off some of the great work that's been done in the last year, and how Java can scale well--from the cloud all the way down to some very small embedded devices, and how JavaFX scales right along with it."Richard Bair and Jasper Potts from the JavaFX team demonstrated a JavaOne schedule builder application with impressive navigation, animation, pop-overs, and transitions. They noted that the application runs seamlessly on either Windows or Macs, running Java 7. They then ran the same application on an Ubuntu Linux machine--"it just works," said Blair.The JavaFX duo next put the recently released JavaFX Scene Builder through its paces -- dragging and dropping various image assets to build the application's UI, then fine tuning a CSS file for the finished look and feel. Among many other new features, in the past six months, JavaFX has released support for H.264 and HTTP live streaming, "so you can get all the real media playing inside your JavaFX application," said Bair. And in their developer preview builds of JavaFX 8, they've now split the rendering thread from the UI thread, to better take advantage of multi-core architectures.Next, Brian Goetz, Java Language Architect, explored language and library features planned for Java SE 8, including Lambda expressions and better parallel libraries. These feature changes both simplify code and free-up libraries to more effectively use parallelism. "It's currently still a lot of work to convert an application from serial to parallel," noted Goetz.Reinhold had previously boasted of Java scaling down to "small embedded devices," so Blair and Potts next ran their schedule builder application on a small embedded PandaBoard system with an OMAP4 chip set. Connected to a touch screen, the embedded board ran the same JavaFX application previously seen on the desktop systems, but now running on Java SE Embedded. (The systems can be seen and tried at four of the nearby JavaOne hotels.) Bob Vandette, Java Embedded Architect, then displayed a $25 Rasberry Pi ARM-based system running Java SE Embedded, noting the even greater need for the platform independence of Java in such highly varied embedded processor spaces. Reinhold and Vandetta discussed Project Jigsaw, the planned modularization of the Java SE platform, and its deferral from the Java 8 release to Java 9. Reinhold demonstrated the promise of Jigsaw by running a modularized demo version of the earlier schedule builder application on the resource constrained Rasberry Pi system--although the demo gods were not smiling down, and the application ultimately crashed.Reinhold urged developers to become involved in the Java 8 development process--getting the weekly builds, trying out their current code, and trying out the new features:http://openjdk.java.net/projects/jdk8http://openjdk.java.net/projects/jdk8/spechttp://jdk8.java.netFrom there, Arun Gupta explored Java EE. The primary themes of Java EE 7, Gupta stated, will be greater productivity, and HTML 5 functionality (WebSocket, JSON, and HTML 5 forms). Part of the planned productivity increase of the release will come from a reduction in writing boilerplate code--through the widespread use of dependency injection in the platform, along with default data sources and default connection factories. Gupta noted the inclusion of JAX-RS in the web profile, the changes and improvements found in JMS 2.0, as well as enhancements to Java EE 7 in terms of JPA 2.1 and EJB 3.2. GlassFish 4 is the reference implementation of Java EE 7, and currently includes WebSocket, JSON, JAX-RS 2.0, JMS 2.0, and more. The final release is targeted for Q2, 2013. Looking forward to Java EE 8, Gupta explored how the platform will provide multi-tenancy for applications, modularity based on Jigsaw, and cloud architecture. Meanwhile, Project Avatar is the group's incubator project for designing an end-to-end framework for building HTML 5 applications. Santiago Pericas-Geertsen joined Gupta to demonstrate their "Angry Bids" auction/live-bid/chat application using many of the enhancements of Java EE 7, along with an Avatar HTML 5 infrastructure, and running on the GlassFish reference implementation.Finally, Gupta covered Project Easel, an advanced tooling capability in NetBeans for HTML5. John Ceccarelli, NetBeans Engineering Director, joined Gupta to demonstrate creating an HTML 5 project from within NetBeans--formatting the project for both desktop and smartphone implementations. Ceccarelli noted that NetBeans 7.3 beta will be released later this week, and will include support for creating such HTML 5 project types. Gupta directed conference attendees to: http://glassfish.org/javaone2012 for everything about Java EE and GlassFish at JavaOne 2012.

    Read the article

< Previous Page | 8 9 10 11 12 13 14 15 16 17 18 19  | Next Page >