Search Results

Search found 16622 results on 665 pages for 'known issues'.

Page 12/665 | < Previous Page | 8 9 10 11 12 13 14 15 16 17 18 19  | Next Page >

• Acer Allionone Z5810 Touchscreen Issues 12.04

  - by Johannes

  I have an Acer Allionone Z5810, and I can't get the touchscreen to work after I install 12.04. Here is the lsusb output: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 003: ID 0596:0508 MicroTouch Systems, Inc. Bus 001 Device 004: ID 04b8:0005 Seiko Epson Corp. Printer Bus 001 Device 005: ID 07ca:1336 AVerMedia Technologies, Inc. Bus 002 Device 003: ID 04ca:0058 Lite-On Technology Corp. Bus 002 Device 004: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode) Bus 002 Device 005: ID 04f2:b23f Chicony Electronics Co., Ltd xinput --list Virtual core pointer id=2 [master pointer (3)] ? ? Virtual core XTEST pointer id=4 [slave pointer (2)] ? ? Lite-On Technology Corp. Wireless Device id=9 [slave pointer (2)] ? ? Lite-On Technology Corp. Wireless Device id=10 [slave pointer (2)] ? Virtual core keyboard id=3 [master keyboard (2)] ? Virtual core XTEST keyboard id=5 [slave keyboard (3)] ? Power Button id=6 [slave keyboard (3)] ? Power Button id=7 [slave keyboard (3)] ? Lite-On Technology Corp. Wireless Device id=8 [slave keyboard (3)] ? USB 2.0 camera id=11 [slave keyboard (3)] ? AT Translated Set 2 keyboard id=12 [slave keyboard (3)] My xorg.conf contains: nvidia-xconfig: X configuration file generated by nvidia-xconfig nvidia-xconfig: version 304.48 (buildmeister@swio-display x86-rhel47-04.nvidia.com) Sun Sep 9 21:31:39 PDT 2012 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" InputDevice "TouchScreen" EndSection Section "Files" EndSection Section "InputDevice" Identifier "TouchScreen" Driver "microtouch" Option "Type" "finger" Option "Device" "/dev/ttyS3" Option "ScreenNo" "0" Option "MinX" "0" Option "MaxX" "16383" Option "MinY" "0" Option "MaxY" "16383" Option "SendCoreEvents" "yes" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Unknown" ModelName "Unknown" HorizSync 28.0 - 33.0 VertRefresh 43.0 - 72.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 SubSection "Display" Depth 24 EndSubSection EndSection

  Read the article

• Those Pesky Migration Issues

  <b>Linux Journal:</b> "I hate having to change. I do not know a lot of people that really enjoy it, but there are just certain aspects to change that bug me"

  Read the article

• Tackle Wi-Fi Security Issues Proficiently

  In today?s world, Wi-Fi has become a convention and as a matter of fact, many big business giants are coming forward for offering service and gadgets for wireless communication. As an immediate effec... [Author: Susan Brown - Computers and Internet - March 21, 2010]

  Read the article

• Unity 5.1 audio issues (no sound in back channels)

  - by N0xus

  I've trying to bring in surround sound audio into my project. I've set my computer up to run in 5.1 and when I play a 6 channel audio through windows media player (it's a test audio that does left speaker, right speaker etc) it works fine. However, when I run it through Unity, all I get is the front 3 channels. I've set it in the Edit - project settings - audio to be 5.1 in there. I even set it in code with following: void Start() { AudioSettings.speakerMode = AudioSpeakerMode.Mode5point1; } How ever, when I run a debug line of: print ( AudioSettings.driverCaps); It tells me that Unity is only playing in stereo. Is there something I'm still not doing? I should also add I've ran 10 different tests using the 3D audio pan and spread options. I've set both to either being fully off, half way on and full. Still the same results.

  Read the article

• Power management issues on an Asus N55

  - by Andrea Borga

  I noticed that with respect to Win7 on my Asus N55 Ubuntu 12.04 tend to overheat the system. After startup the fan controller takes control of the fan, I could here it slowing down, after a few second following a login the fan increases its speed again. Though there are no processor hungry process: top shows only Xorg consuming 4%. Even with the system monitor the CPUs load look ok. Is it a power management related problem? This can cause battery life troubles in general, and electronics is never happy to be overheated. Is there a better tool to root the cause of the issue?

  Read the article

• HP Pavilion g6 1190sm laptop has overheat/hibernation/graphics issues

  - by Jan

  Every time I reboot or shutdown my laptop, while the laptop is booting again I get a screen (before loading the OS) that HP discovered overheating and system went into hibernation. But the point is that the laptop is not overheating nor going into hibernation by itself. Also, because of the hybrid graphics card I cannot install additional drivers. Desktop resolution and all works perfectly but I cannot use Unity 3D. Also, OpenGL doesn't work as it should (with Cairo Dock). As I've read some posts, people say that vgaswitcheroo doesn't work on 12.04 so I haven't tried it.

  Read the article

• Google Authorship issues

  - by user29107

  I am facing the same issue , tried lots of time followed whols process after that also I am getting the same issue. Email verification has not established authorship for this webpage. Email address on the sanjeebpanda.com domain has been verified on this profile: Yes Public contributor-to link from Google+ profile to sanjeebpanda.com: Yes Automatically detected author name on webpage: Not Found. What to do. Please help

  Read the article

• Exchange Cached Mode (Exchange 2010) with Outlook 2003 and Outlook 2010 Causing Sync Issues

  - by Jason N. Gaylord

  We have Exchange 2010 and a mix of Outlook 2003 and Outlook 2010 clients. When Exchange Cached Mode is enabled, clients are receiving sync issues. In Outlook 2010, the sync issues are mainly with the Deleted Items. In Outlook 2003, they are mainly around the Offline Address Book. When Exchange Cached Mode is disabled, the clients notice a 3 second delay in deleting email in list view within the Inbox. Anyway that these two issues can be resolved? It's a big pain especially to the frustrated end users. TIA!!!!

  Read the article

• Google analytics goal funnel visualization issues

  - by Lauren

  This is the goal funnel for checkout. Does anyone have any idea where the "/" is coming from? The cart page is at site: game on glove dot com (I don't want this stackoverflow page being indexed in google particularly well). Go to the site, click on the order button, make your selection, and click the button to enter the cart (it resolves to /Cart and /Shop-Cart). I believe I used the regular expression matching to match "cart". So why the "/" (I don't know what is causing the home page to reload when users are on the Cart page within a Colorbox lightbox where the only way back to home or "/" is to hit the exit button in the top right of the lightbox)? Here's my one guess for the former question but it doesn't seem likely: See the "check out with paypal" button? If you hovered over it, it does default to the home page which is what might be the "/"... but it really redirects the user to the paypal.com page so it shouldn't also load the home page.

  Read the article

• lubuntu issues with desktop directory

  - by Hongxu Chen

  My lubuntu 12.04 is upgraded from the 11.10 version and I'm a Chinese user. What surprises me is that the directory shown on the initial screen is always changing! recently It seems to be mapped with the directory called w in my home directory(~). However when using pcmanfm to open the directory it usually shows odd string as to the name of the folder that cannot be print, which I think may be some Chinese characters.The directory also sometimes fails to appear in the window appeared first when logged in. I know the lxde has no conception of the shown folder and I think the lubuntu team has done some optimization. Can someone tell me what's happening?Thanks in advance.

  Read the article

• Top 25 security issues for developers of web sites

  - by BizTalk Visionary

  Sourced from: CWE This is a brief listing of the Top 25 items, using the general ranking. NOTE: 16 other weaknesses were considered for inclusion in the Top 25, but their general scores were not high enough. They are listed in the On the Cusp focus profile. Rank Score ID Name [1] 346 CWE-79 Failure to Preserve Web Page Structure ('Cross-site Scripting') [2] 330 CWE-89 Improper Sanitization of Special Elements used in an SQL Command ('SQL Injection') [3] 273 CWE-120 Buffer Copy without Checking Size of Input ('Classic Buffer Overflow') [4] 261 CWE-352 Cross-Site Request Forgery (CSRF) [5] 219 CWE-285 Improper Access Control (Authorization) [6] 202 CWE-807 Reliance on Untrusted Inputs in a Security Decision [7] 197 CWE-22 Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') [8] 194 CWE-434 Unrestricted Upload of File with Dangerous Type [9] 188 CWE-78 Improper Sanitization of Special Elements used in an OS Command ('OS Command Injection') [10] 188 CWE-311 Missing Encryption of Sensitive Data [11] 176 CWE-798 Use of Hard-coded Credentials [12] 158 CWE-805 Buffer Access with Incorrect Length Value [13] 157 CWE-98 Improper Control of Filename for Include/Require Statement in PHP Program ('PHP File Inclusion') [14] 156 CWE-129 Improper Validation of Array Index [15] 155 CWE-754 Improper Check for Unusual or Exceptional Conditions [16] 154 CWE-209 Information Exposure Through an Error Message [17] 154 CWE-190 Integer Overflow or Wraparound [18] 153 CWE-131 Incorrect Calculation of Buffer Size [19] 147 CWE-306 Missing Authentication for Critical Function [20] 146 CWE-494 Download of Code Without Integrity Check [21] 145 CWE-732 Incorrect Permission Assignment for Critical Resource [22] 145 CWE-770 Allocation of Resources Without Limits or Throttling [23] 142 CWE-601 URL Redirection to Untrusted Site ('Open Redirect') [24] 141 CWE-327 Use of a Broken or Risky Cryptographic Algorithm [25] 138 CWE-362 Race Condition Cross-site scripting and SQL injection are the 1-2 punch of security weaknesses in 2010. Even when a software package doesn't primarily run on the web, there's a good chance that it has a web-based management interface or HTML-based output formats that allow cross-site scripting. For data-rich software applications, SQL injection is the means to steal the keys to the kingdom. The classic buffer overflow comes in third, while more complex buffer overflow variants are sprinkled in the rest of the Top 25.

  Read the article

• Shared Library Issues In Linux

  <b>Innovations:</b> "Shared libraries are one of the many strong design features of Linux, but can lead to headaches for inexperienced users, and even experienced users in certain situations."

  Read the article

• 3D/perspective Top down shooter bullet issues

  - by Tseng

  I'm developing a top-down shooter with multiple levels (ground for ground units, middle level for buildings, top level for air unity). The problem is the collision. Though I can make the collider box of a bullet be long enough to reach the ground (and collide with it), the real issue is optical. When the bullet is fired from a aircraft and collides with some object on the ground (building, ground unit) it will be optically offset due to the perspective camera, because it looks like the shot "by-passed" the target as seen below Is there any way to make the bullets collide perspectively correct? I'm using Unity3d Engine and it offers only simple colliders (box, sphere, cylinder, mesh and wheel), though I don't think a cone-formed collider would solve this issue. I'd need a (cheap) way to check if it's overlapping a destructible object? I thought of casting a ray from the camera through the bullet and if it hits something destructible, trigger an action, but that's quite punctual and maybe to performance heavy on certain number of bullets

  Read the article

• HP Envy 15 3040nr sound issues

  - by Lenny

  I have successfully set up my Envy 15" for Ubuntu 12.04 except for the sound, anyone have any ideas about how to get it working? I had to blacklist snd-usb-audio to my alsa to stop pulseaudio from freezing on login and logout, but now no sound plays. Could anyone provide me with some guidance? lspci info 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) 00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09) 00:01.1 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09) 00:01.2 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09) 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04) 00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05) 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05) 00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5) 00:1c.2 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 3 (rev b5) 00:1c.4 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 (rev b5) 00:1c.7 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 8 (rev b5) 00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05) 00:1f.0 ISA bridge: Intel Corporation HM65 Express Chipset Family LPC Controller (rev 05) 00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 05) 00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05) 01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Whistler [AMD Radeon HD 6600M Series] 09:00.0 Network controller: Intel Corporation Centrino Advanced-N 6230 (rev 34) 0a:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5116 PCI Express Card Reader (rev 01) 10:00.0 Ethernet controller: Atheros Communications Inc. AR8151 v2.0 Gigabit Ethernet (rev c0) 11:00.0 USB controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 04)

  Read the article

• Issues while trying to install Xsane

  - by Sebastian

  :) I am sort of new in the world of Linux. I installed Zorin OS and I am very happy with it. My only problem is that I would like to be able to use my scanner. My Kodak printer works fine, but the scanner is not detected; therefore, I am trying to install Xsane. The issue remains, every time that I try to install it, and error message comes up saying; "Package dependencies cannot be resolved" What can I do? thanks!

  Read the article

• sprite animation system height recalculating has some issues

  - by Nicolas Martel

  Basically, the way it works is that it update the frame to show every let's say 24 ticks and every time the frame update, it recalculates the height and width of the new sprite to render so that my gravity logics and stuff works well. But the problem i am having now is a bit hard to explain in words only, therefore i will use this picture to assist me The picture So what i need basically is that if let's say i froze the sprite at the first frame, then unfreeze it and freeze it at the second frame, have the second frame's sprite (let's say it's a prone move) simply stand on the foothold without starting the gravity and when switching back, have the first sprite go back on the foothold like normal without being under the foothold. I had 2 ideas on doing this but I'm not sure it's the most efficient ways to do it so i wanna hear your inputs.

  Read the article

• Solving 2D Collision Detection Issues with Relative Velocities

  - by Jengerer

  Imagine you have a situation where two objects are moving parallel to one-another and are both within range to collide with a static wall, like this: A common method used in dynamic collision detection is to loop through all objects in arbitrary order, solve for pair-wise collision detection using relative velocities, and then move the object to the nearest collision, if any. However, in this case, if the red object is checked first against the blue one, it would see that the relative velocity to the blue object is -20 m/s (and would thereby not collide this time frame). Then it would see that the red object would collide with the static wall, and the solution would be: And the red object passes through the blue one. So it appears to be a matter of choosing the right order in which you check collisions; but how can you determine which order is correct? How can this passing through of objects be avoided? Is ignoring relative velocity and considering every object as static during pair-wise checks a better idea for this reason?

  Read the article

• boot issues - long delay, then "gave up waiting for root device"

  - by chazomaticus

  I've had this issue on and off for about two years now. I noticed it on a new (custom built) machine running 10.04 when that first came out, but then it went away until a few months ago. I've gone through a number of hard drive changes but I can't say specifically what if anything I changed hardware-wise to make it stop or start happening. I had assumed upgrading to a modern Ubuntu version would fix the issue, so I installed 12.04 beta on a spare partition last night, but it's still happening. Here's the issue. After grub loads and I select a kernel to boot, the screen goes blank save for a blinking cursor. It sits in this state for many long minutes before it finally gives up and gives me an initramfs shell with the message gave up waiting for root device (and lists the /dev/disk/by-uuid/... path it was waiting for) but no other specific diagnostic information. Now, here's the tricky part. For one, the problem is intermittent - sometimes it progresses from the blinking cursor to the Ubuntu splash boot screen in a few seconds, and once it gets that far it always continues booting fine. The really bizarre thing is that I can "force" it to "find" the root device by repeatedly pressing the space bar and hitting the machine's power button. If I tap those enough, eventually I will notice the hard drive light coming on, at which point it will always continue the boot process after a few seconds. Interestingly, if I wait slightly too long before pressing the power button (30s?), as soon as I press it I get the gave up waiting message and the initramfs shell. I've tried setting up /etc/fstab (and the grub menu.lst or whatever it's called nowadays) to use device names (e.g. /dev/sda1) instead of UUIDs, but I get the same effect just with the device name, not UUID, in the error message. I should also mention that when I boot to Windows 7, there is no issue. It boots slowly all the time just by virtue of being Windows, but it never hangs indefinitely. This would seem to indicate it's a problem in Ubuntu, not the hardware. It's pretty annoying to have to babysit the computer every time it boots. Any ideas? I'm at a loss. Not even sure how to diagnose the issue. Thanks! EDIT: Here's some dmesg output from 10.04. The 15 second gap is where it was doing nothing. I pressed the power button and space bar a few times, and the stuff at 16 seconds happened. Not sure what any of it means. [ 1.320250] scsi18 : ahci [ 1.320294] scsi19 : ahci [ 1.320320] ata19: SATA max UDMA/133 abar m8192@0xfd4fe000 port 0xfd4fe100 ir q 18 [ 1.320323] ata20: SATA max UDMA/133 abar m8192@0xfd4fe000 port 0xfd4fe180 ir q 18 [ 1.403886] usb 2-4: new high speed USB device using ehci_hcd and address 4 [ 1.562558] usb 2-4: configuration #1 chosen from 1 choice [ 16.477824] ata16: SATA link down (SStatus 0 SControl 300) [ 16.477843] ata19: SATA link down (SStatus 0 SControl 300) [ 16.477857] ata3: SATA link down (SStatus 0 SControl 300) [ 16.477895] ata15: SATA link down (SStatus 0 SControl 300) [ 16.477906] ata20: SATA link down (SStatus 0 SControl 300) [ 16.477977] ata17: SATA link down (SStatus 0 SControl 300) [ 16.478003] ata12: SATA link down (SStatus 0 SControl 300) [ 16.478046] ata13: SATA link down (SStatus 0 SControl 300) [ 16.478063] ata14: SATA link down (SStatus 0 SControl 300) [ 16.478108] ata11: SATA link down (SStatus 0 SControl 300) [ 16.478123] ata18: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 16.478127] ata6: SATA link down (SStatus 0 SControl 300) [ 16.478157] ata5: SATA link down (SStatus 0 SControl 300) [ 16.478193] ata18.00: ATAPI: MARVELL VIRTUALL, 1.09, max UDMA/66 After that, it took its sweet time, and I had to keep hitting space bar to coax it along. Here's some more dmesg output from a little later in the boot process: [ 17.982291] input: BTC USB Multimedia Keyboard as /devices/pci0000:00/0000:00 :13.0/usb5/5-2/5-2:1.0/input/input4 [ 17.982335] generic-usb 0003:046E:5506.0002: input,hidraw1: USB HID v1.10 Key board [BTC USB Multimedia Keyboard] on usb-0000:00:13.0-2/input0 [ 18.005211] input: BTC USB Multimedia Keyboard as /devices/pci0000:00/0000:00 :13.0/usb5/5-2/5-2:1.1/input/input5 [ 18.005274] generic-usb 0003:046E:5506.0003: input,hiddev96,hidraw2: USB HID v1.10 Device [BTC USB Multimedia Keyboard] on usb-0000:00:13.0-2/input1 [ 22.484906] EXT4-fs (sda6): INFO: recovery required on readonly filesystem [ 22.484910] EXT4-fs (sda6): write access will be enabled during recovery [ 22.548542] EXT4-fs (sda6): recovery complete [ 22.549074] EXT4-fs (sda6): mounted filesystem with ordered data mode [ 32.516772] Adding 20482832k swap on /dev/sda5. Priority:-1 extents:1 across:20482832k [ 32.742540] udev: starting version 151 [ 33.002004] Bluetooth: Atheros AR30xx firmware driver ver 1.0 [ 33.008135] parport_pc 00:09: reported by Plug and Play ACPI [ 33.008186] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 33.012076] lp: driver loaded but no devices found [ 33.037271] ppdev: user-space parallel port driver [ 33.090256] lp0: using parport0 (interrupt-driven). Any clues in there?

  Read the article

• Mozilla Issues Last Firefox 3.0 Security Update

  As it plans to wind down the 3.0.x iterations of Firefox, open source browser backer Mozilla offers a wave of security patches to address a variety of threats.

  Read the article

• Sign In With Facebook - Business Issues

  - by Joshiatto

  I've got an issue where this company wants to provide all sorts of whiz bang features to their users that require an insane number of facebook permissions for their FB app. Being that my name is going to be attached to this, I would rather give them a solution which allows for easy sign in and asks for the minimum permissions up front. This would give them a huge boost in registrations and activity publishing across the site with the potential to "go viral". If we ask for a ton of permissions up front I know for a fact we will not go viral and will probably incur much wrath from the blogosphere. What would you do?

  Read the article

• How can I debug VNC screen repainting issues?

  - by stevecoh1

  I have what some might consider a trivial use for VNC, but I'd like to get it to work and it's technically interesting to me. My use case is that I'd like sometimes to be able to control my desktop from my living room while watching tv. The desktop runs Ubuntu, currently 12.04, but that may change soon. I'm using the default Vino server. I'd like to control it from my IPad and I have a nicely performing WiFi. I got the well-regarded (if reviews can be believed) app Vnc Viewer for the iPad. It's not working as well as I'd hoped. The problem is the speed of repainting. It's abysmally slow. I can click a close button, walk over to the desktop and see that the window has closed, but on the iPad, the VNC Client won't show the close for minutes if ever. I've noticed that CLOSING windows takes a lot longer to update than to open them. So the question is is this primarily client or server-caused? And if server-caused what can be done about it? Is Vino the best client or is something else better? Thanks

  Read the article

• MAAS/Juju architecture and issues

  - by Massimo

  I recently deployed a MAAS/Juju environment based on a six nodes cluster, using Ubuntu 12.04 LTS, to run a "proof of concept". I could appreciate how interesting the architecture is, and I'd like to understand if I can really base my future business on this technology. Therefore I'd like to understand more about any involved limitations, constraints and necessities. In particular I'd like to understand: 1) how can MAAS be made reliable, i.e. deployed over two or more physical nodes able to fail-over ? 2) can the same physical cluster host multiple juju environments, under the assumption openstack/virtualization is not used ? 3) can the same physical node host different charms of the same juju environment, deployed in a standard, reliable way by juju ?

  Read the article

• Ubuntu openGL issues

  - by Dank101

  my OpenGL doesn't work at all i get Xlib: extension "GLX" missing on display ":0". lspci output 00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0126] (rev 09) (prog-if 00 [VGA controller]) 01:00.0 VGA compatible controller [0300]: NVIDIA Corporation Device [10de:1246] (rev a1) (prog-if 00 [VGA controller]) dmesg | grep -i nvid [ 9.469068] nvidia: module license 'NVIDIA' taints kernel. [ 9.538786] nvidia 0000:01:00.0: power state changed by ACPI to D0 [ 9.538792] nvidia 0000:01:00.0: power state changed by ACPI to D0 [ 9.538796] nvidia 0000:01:00.0: enabling device (0006 -> 0007) [ 9.538803] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 9.538809] nvidia 0000:01:00.0: setting latency timer to 64 [ 9.538942] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 304.48 Sun Sep 9 [10300.955799] nvidia 0000:01:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [10300.955803] nvidia 0000:01:00.0: restoring config space at offset 0xc (was 0x0, writing 0xfff80000) [10300.955807] nvidia 0000:01:00.0: restoring config space at offset 0x9 (was 0x1, writing 0x4001) [10300.955811] nvidia 0000:01:00.0: restoring config space at offset 0x7 (was 0xc, writing 0xd000000c) [10300.955814] nvidia 0000:01:00.0: restoring config space at offset 0x5 (was 0xc, writing 0xc000000c) [10300.955817] nvidia 0000:01:00.0: restoring config space at offset 0x4 (was 0x0, writing 0xf0000000) [10300.955820] nvidia 0000:01:00.0: restoring config space at offset 0x3 (was 0x800000, writing 0x10) [10300.955823] nvidia 0000:01:00.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100007) my computer is a dell XPS l702x

  Read the article

• Ubuntu and Surface Pro, wifi issues not fixed?

  - by Confused or too stupid

  Just a quick question, from the numerous other threads I found, is the wifi still a no go straight out of installing Ubuntu? I tried this Dual boot Surface Pro with Ubuntu? with 13.04, the wifi is sporadic in working. From that and other threads I gathered that 13.10 would include the fix, so I tossed that onto the Surface as well, with the same results. Is there anything I am missing? Is there any other distro that has better luck with the Marvell chip?

  Read the article

• Client-Server connection response timeout issues

  - by Srikar

  User creates a folder in client and in the client-side code I hit an API to the server to make this persistent for that user. But in some cases, my server is so busy that the request timesout. The server has executed my request but timedout before sending a response back to client. The timeout set is 10 seconds in client. At this point the client thinks that server has not executed its request (of creating a folder) and ends up sending it again. Now I have 2 folders on the server but the user has created only 1 folder in the client. How to prevent this? One of the ways to solve this is to use a unique ID with each new request. So the ID acts as a distinguisher between old and new requests from client. But this leads to storing these IDs on my server and do a lookup for each API call which I want to avoid. Other way is to increase the timeout duration. But I dont want to change this from 10 seconds. Something tells me that there are better solutions. I have posted this question in stackoverflow but I think its better suited here. UPDATE: I will make my problem even more explicit. The client is a webbrowser and the server is running nginx+django+mysql (standard stack). The user creates a folder in webbrowser. As a result I need to hit a server API. The API call responds back, thereby client knows API call was success. This is normal scenario. Sometimes though, server successfully completes the API request but the client-side (webbrowser) connection timesout before server can respond back. The client has no clue at this point. The user thinks the request was a fail & clicks again. This time it was a success but when the UI refreshes he sees 2 folders. I want to remedy this situation.

  Read the article

< Previous Page | 8 9 10 11 12 13 14 15 16 17 18 19  | Next Page >