Search Results

Search found 108728 results on 4350 pages for 'project server'.

Page 12/4350 | < Previous Page | 8 9 10 11 12 13 14 15 16 17 18 19  | Next Page >

  • OpenVPN, Server 12.04, connect to machines in home LAN behind VPN server

    - by inexion
    Problem: I've set up a working OpenVPN server, and am able to connect to it from anywhere using my mac laptop and tunnelblick. When I connect in, I'm assigned an IP address of 10.8.0.x, the server is 10.8.0.1, so I have no problems SSHing into it. Once SSHd in, I can even ping other machines (obviously) on my home network (192.168.1.x). Desired outcome: What I want, is, to connect to the VPN server, and instead of getting a 10.8.0.x address, I get a 192.168.1.x on my home network. I can't figure out how to talk to the OTHER machines on my home network WITHOUT being SSHd in to the VPN server. I'd like to just connect to my VPN server, then be a part of my home network. Attempted solutions: I've read that I need to set up routes, and/or enable IP forwarding. I enabled IP forwarding using sudo sysctl -w net.ipv4.ip_forward=1 and that doesn't seem to have done anything. I've also uncommented a line in the OpenVPN's server.conf file: # Push routes to the client to allow it # to reach other private subnets behind # the server. Remember that these # private subnets will also need # to know to route the OpenVPN client # address pool (10.8.0.0/255.255.255.0) # back to the OpenVPN server. push "route 192.168.1.0 255.255.255.0" ;push "route 192.168.20.0 255.255.255.0" But still no luck, I still get a 10.8.0.x address... I've also read I may have to add routes to the router itself, but haven't tried that. Any help appreciated, thanks!

    Read the article

  • SQL SERVER – 2014 Announced and SQL Server 2014 Datasheet

    - by Pinal Dave
    Earlier this week Microsoft has announced SQL Server 2014. The release date of Trial of SQL Server to be believed later this year. Here are few of the improvements which I was looking forward are there in this release. Please note this is not the exhaustive list of the features of SQL Server 2014. This is the a quick note on the features which I was looking forward and now will be available in this release. Always On supports now 8 secondaries instead of 4 Online Indexing at partition level – this is a good thing as now index rebuilding can be done at a partition level Statistics at the partition level – this will be a huge improvement in performance In-Memory OLTP works by providing in-application memory storage for the most often used tables in SQL Server. (Read More Here) Columnstore Index can be updated – I just can’t wait for this feature (Columnstore Index) Resource Governor can control IO along with CPU and Memory Increase performance by extending SQL Server in-memory buffer pool to SSDs Backup to Azure Storage You can additionally download SQL Server 2014 Datasheet from here. Which is your favorite new feature of SQL Server 2014? Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

    Read the article

  • Folders in SQL Server Data Tools

    - by jamiet
    Recently I have begun a new project in which I am using SQL Server Data Tools (SSDT) and SQL Server Integration Services (SSIS) 2012. Although I have been using SSDT & SSIS fairly extensively while SQL Server 2012 was in the beta phase I usually find that you don’t learn about the capabilities and quirks of new products until you use them on a real project, hence I am hoping I’m going to have a lot of experiences to share on my blog over the coming few weeks. In this first such blog post I want to talk about file and folder organisation in SSDT. The predecessor to SSDT is Visual Studio Database Projects. When one created a new Visual Studio Database Project a folder structure was provided with “Schema Objects” and “Scripts” in the root and a series of subfolders for each schema: Apparently a few customers were not too happy with the tool arbitrarily creating lots of folders in Solution Explorer and hence SSDT has gone in completely the opposite direction; now no folders are created and new objects will get created in the root – it is at your discretion where they get moved to: After using SSDT for a few weeks I can safely say that I preferred the older way because I never used Solution Explorer to navigate my schema objects anyway so it didn’t bother me how many folders it created. Having said that the thought of a single long list of files in Solution Explorer without any folders makes me shudder so on this project I have been manually creating folders in which to organise files and I have tried to mimic the old way as much as possible by creating two folders in the root, one for all schema objects and another for Pre/Post deployment scripts: This works fine until different developers start to build their own different subfolder structures; if you are OCD-inclined like me this is going to grate on you eventually and hence you are going to want to move stuff around so that you have consistent folder structures for each schema and (if you have multiple databases) each project. Moreover new files get created with a filename of the object name + “.sql” and often people like to have an extra identifier in the filename to indicate the object type: The overall point is this – files and folders in your solution are going to change. Some version control systems (VCSs) don’t take kindly to files being moved around or renamed because they recognise the renamed/moved file simply as a new file and when they do that you lose the revision history which, to my mind, is one of the key benefits of using a VCS in the first place. On this project we have been using Team Foundation Server (TFS) and while it pains me to say it (as I am no great fan of TFS’s version control system) it has proved invaluable when dealing with the SSDT problems that I outlined above because it is integrated right into the Visual Studio IDE. Thus the advice from this blog post is: If you are using SSDT consider using an Visual-Studio-integrated VCS that can easily handle file renames and file moves I suspect that fans of other VCSs will counter by saying that their VCS weapon of choice can handle renames/file moves quite satisfactorily and if that’s the case…great…let me know about them in the comments. This blog post is not an attempt to make people use one particular VCS, only to make people aware of this issue that might rise when using SSDT. More to come in the coming few weeks! @jamiet

    Read the article

  • Can't view database on SQL Server 2008 with domain user

    - by abatishchev
    I created a login for a domain user (domain admin) and added it to role serveradmin, but after logging in I still can't list databases getting next error: The database MyDB is not accessible. (ObjectExplorer) Program Location: at Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.DatabaseNavigableItem.get_CanGetChildren() at Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.NavigableItem.GetChildren(IGetChildrenRequest request) at Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.ExplorerHierarchyNode.BuildChildren(WaitHandle quitEvent) How can I fix that?

    Read the article

  • Project Server 2007 install issue - ProjectEventService won't start

    - by Brian Meinertz
    Trying to install PS2007 with SP1 on Server 2003. The install goes fine, but when running the SharePoint Configuration Wizard, it fails at stage 6 of 12 with the error: Failed to register SharePoint Services. An exception of type System.InvalidOperationException was thrown. Additional exception information: Cannot start service ProjectEventService on computer '.'. From the PSCDiagnostics log: Exception: System.InvalidOperationException: Cannot start service ProjectEventService on computer '.'. --- System.ComponentModel.Win32Exception: The service did not respond to the start or control request in a timely fashion. The ProjectEventService (Microsoft Office Project Server Event) won't even start manually using the Network Service account. Starting the service with a domain account works, but subsequently running the Config Wizard causes the service to be removed and re-provisioned to run using the Network Service account, which again fails. Presumably Network Service needs elevated permissions, but even adding it to the local Admin group makes no difference. Anyone come across this sort of issue before?

    Read the article

  • Project Server 2007 install issue - ProjectEventService won't start

    - by Brian Meinertz
    Trying to install PS2007 with SP1 on Server 2003. The install goes fine, but when running the SharePoint Configuration Wizard, it fails at stage 6 of 12 with the error: Failed to register SharePoint Services. An exception of type System.InvalidOperationException was thrown. Additional exception information: Cannot start service ProjectEventService on computer '.'. From the PSCDiagnostics log: Exception: System.InvalidOperationException: Cannot start service ProjectEventService on computer '.'. --- System.ComponentModel.Win32Exception: The service did not respond to the start or control request in a timely fashion. The ProjectEventService (Microsoft Office Project Server Event) won't even start manually using the Network Service account. Starting the service with a domain account works, but subsequently running the Config Wizard causes the service to be removed and re-provisioned to run using the Network Service account, which again fails. Presumably Network Service needs elevated permissions, but even adding it to the local Admin group makes no difference. Anyone come across this sort of issue before?

    Read the article

  • Proper Settings for SQL Server 2005 Profiler User Auditing

    - by Irwin M. Fletcher
    I have been tasked with creating a catalog of all users\applications that access a particular database at our company. The issue is that we have no idea what users are using the database and what they are doing (what queries they are using or stored procedures). I would like to run this over a few days, but want to minimize the amount of information that is returned in the trace, could anyone please advise me on what the minimal settings for Profiler are for this.

    Read the article

  • Deleted user default database - SQL Server 2008

    - by RadiantHex
    Hi folks, I cannot connect to the database anymore, I'm getting: Cannot open user default database. Login failed. I have deleted the database during a previous session and then tried to recreate it. But the recreate failed. Now I am stuck with this error, what can I do? Edit: I'm using Windows Authentication Any ideas? Fixed: use the command: sqlcmd -E -d master then type: ALTER LOGIN [Your Windows Login] WITH DEFAULT_DATABASE=master GO :)

    Read the article

  • Server Restart's and Respective Orders

    - by TheD
    EDIT:Not meaning to be disrespectful to any of the answers, but, the main question was whether rebooting a DC at the beginning of a cycle, then all the other servers, or rebooting it at the end once all the others are back online - is there a reason for doing it either way? I'm still not sure based on current responses. This will most likely seem like a fairly, maybe even stupid, question, but it's something I have been wondering about. As part of a regular process for clients servers are restarted remotely after patches and every client tends to have a similar order - but there always seems to be a small debate when it comes down to when do you reboot your DC. For example, 4 servers, 1 DC, 1xExchange, 1xBESX and 1xRandom, lets say it has some CRM software installed, is it best to reboot the DC first, then Exchange, then BESX and so on - or reboot all the servers, then reboot the DC last? - Perhaps it doesn't matter at all and it's just a case of how you have always done it. Would it change in a Hyper-V environment for example, with a physical DC, 1 VHost with all your servers virtualised on that Host? Rebooting the VHost and Virtual Machines first, then the DC at the end, or vice versa? Thanks!

    Read the article

  • How to deploy the advanced search page using Module in SharePoint 2013

    - by ybbest
    Today, I’d like to show you how to deploy your custom advanced search page using module in Visual Studio 2012.Using a module is the way how SharePoint deploy all the publishing pages to the search centre. Browse to the template under 15 hive of SharePoint2013, then go to the SearchCenterFiles under Features(as shown below).Then open the Files.xml it shows how SharePoint using module to deploy advanced search.You can download the solution here. Now I am going to show you how to deploy your custom advanced search page.The feature is located  in the C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\TEMPLATE\FEATURES\SearchCenterFiles . To deploy SharePoint advanced Search pages, you need to do the following: 1. Create SharePoint2013 project and then create a module item. 2. Find how Out of box SharePoint deploy the Advanced Search Page from Files.xml and copy and paste it into the elements.xml <File Url="advanced.aspx" Type="GhostableInLibrary"> <Property Name="PublishingPageLayout" Value="~SiteCollection/_catalogs/masterpage/AdvancedSearchLayout.aspx, $Resources:Microsoft.Office.Server.Search,SearchCenterAdvancedSearchTitle;" /> <Property Name="Title" Value="$Resources:Microsoft.Office.Server.Search,Search_Advanced_Page_Title;" /> <Property Name="ContentType" Value="$Resources:Microsoft.Office.Server.Search,contenttype_welcomepage_name;" /> <AllUsersWebPart WebPartZoneID="MainZone" WebPartOrder="1"> <![CDATA[ <WebPart xmlns="http://schemas.microsoft.com/WebPart/v2"> <Assembly>Microsoft.Office.Server.Search, Version=15.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c</Assembly> <TypeName>Microsoft.Office.Server.Search.WebControls.AdvancedSearchBox</TypeName> <Title>$Resources:Microsoft.Office.Server.Search,AdvancedSearch_Webpart_Title;</Title> <Description>$Resources:Microsoft.Office.Server.Search,AdvancedSearch_Webpart_Description;</Description> <FrameType>None</FrameType> <AllowMinimize>true</AllowMinimize> <AllowRemove>true</AllowRemove> <IsVisible>true</IsVisible> <SearchResultPageURL xmlns="urn:schemas-microsoft-com:AdvancedSearchBox">results.aspx</SearchResultPageURL> <TextQuerySectionLabelText xmlns="urn:schemas-microsoft-com:AdvancedSearchBox">$Resources:Microsoft.Office.Server.Search,AdvancedSearch_FindDocsWith_Title;</TextQuerySectionLabelText> <ShowAndQueryTextBox xmlns="urn:schemas-microsoft-com:AdvancedSearchBox">true</ShowAndQueryTextBox> <ShowPhraseQueryTextBox xmlns="urn:schemas-microsoft-com:AdvancedSearchBox">true</ShowPhraseQueryTextBox> <ShowOrQueryTextBox xmlns="urn:schemas-microsoft-com:AdvancedSearchBox">true</ShowOrQueryTextBox> <ShowNotQueryTextBox xmlns="urn:schemas-microsoft-com:AdvancedSearchBox">true</ShowNotQueryTextBox> <ScopeSectionLabelText xmlns="urn:schemas-microsoft-com:AdvancedSearchBox">$Resources:Microsoft.Office.Server.Search,AdvancedSearch_NarrowSearch_Title;</ScopeSectionLabelText> <ShowLanguageOptions xmlns="urn:schemas-microsoft-com:AdvancedSearchBox">true</ShowLanguageOptions> <ShowResultTypePicker xmlns="urn:schemas-microsoft-com:AdvancedSearchBox">true</ShowResultTypePicker> <ShowPropertiesSection xmlns="urn:schemas-microsoft-com:AdvancedSearchBox">true</ShowPropertiesSection> <PropertiesSectionLabelText xmlns="urn:schemas-microsoft-com:AdvancedSearchBox">$Resources:Microsoft.Office.Server.Search,AdvancedSearch_AddPropRestrictions_Title;</PropertiesSectionLabelText> </WebPart> ]]> </AllUsersWebPart> </File> 3. Customize your SharePoint advanced Search Page by modifying the Advanced Search Box and Export the webpart and copy the webpart file to the elements under module. 4. Export the web part and copy the content of the web part file to the elements.xml in the module. <File Path="AdvancedSearchPage\advanced.aspx" Url="employeeAdvanced.aspx" Type="GhostableInLibrary"> <Property Name="PublishingPageLayout" Value="~SiteCollection/_catalogs/masterpage/AdvancedSearchLayout.aspx, $Resources:Microsoft.Office.Server.Search,SearchCenterAdvancedSearchTitle;" /> <Property Name="Title" Value="$Resources:Microsoft.Office.Server.Search,Search_Advanced_Page_Title;" /> <Property Name="ContentType" Value="$Resources:Microsoft.Office.Server.Search,contenttype_welcomepage_name;" /> <AllUsersWebPart WebPartZoneID="MainZone" WebPartOrder="1"> <![CDATA[ <WebPart xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns="http://schemas.microsoft.com/WebPart/v2"> <Title>Advanced Search Box</Title> <FrameType>None</FrameType> <Description>Displays parameterized search options based on properties and combinations of words.</Description> <IsIncluded>true</IsIncluded> <ZoneID>MainZone</ZoneID> <PartOrder>1</PartOrder> <FrameState>Normal</FrameState> <Height /> <Width /> <AllowRemove>true</AllowRemove> <AllowZoneChange>true</AllowZoneChange> <AllowMinimize>true</AllowMinimize> <AllowConnect>true</AllowConnect> <AllowEdit>true</AllowEdit> <AllowHide>true</AllowHide> <IsVisible>true</IsVisible> <DetailLink /> <HelpLink /> <HelpMode>Modeless</HelpMode> <Dir>Default</Dir> <PartImageSmall /> <MissingAssembly>Cannot import this Web Part.</MissingAssembly> <PartImageLarge /> <IsIncludedFilter /> <Assembly>Microsoft.Office.Server.Search, Version=15.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c</Assembly> <TypeName>Microsoft.Office.Server.Search.WebControls.AdvancedSearchBox</TypeName> <SearchResultPageURL xmlns="urn:schemas-microsoft-com:AdvancedSearchBox">results.aspx</SearchResultPageURL> <TextQuerySectionLabelText xmlns="urn:schemas-microsoft-com:AdvancedSearchBox">Find documents that have...</TextQuerySectionLabelText> <ShowAndQueryTextBox xmlns="urn:schemas-microsoft-com:AdvancedSearchBox">true</ShowAndQueryTextBox> <AndQueryTextBoxLabelText xmlns="urn:schemas-microsoft-com:AdvancedSearchBox" /> <ShowPhraseQueryTextBox xmlns="urn:schemas-microsoft-com:AdvancedSearchBox">true</ShowPhraseQueryTextBox> <PhraseQueryTextBoxLabelText xmlns="urn:schemas-microsoft-com:AdvancedSearchBox" /> <ShowOrQueryTextBox xmlns="urn:schemas-microsoft-com:AdvancedSearchBox">true</ShowOrQueryTextBox> <OrQueryTextBoxLabelText xmlns="urn:schemas-microsoft-com:AdvancedSearchBox" /> <ShowNotQueryTextBox xmlns="urn:schemas-microsoft-com:AdvancedSearchBox">true</ShowNotQueryTextBox> <NotQueryTextBoxLabelText xmlns="urn:schemas-microsoft-com:AdvancedSearchBox" /> <ScopeSectionLabelText xmlns="urn:schemas-microsoft-com:AdvancedSearchBox">Narrow the search...</ScopeSectionLabelText> <ShowScopes xmlns="urn:schemas-microsoft-com:AdvancedSearchBox">false</ShowScopes> <ScopeLabelText xmlns="urn:schemas-microsoft-com:AdvancedSearchBox" /> <DisplayGroup xmlns="urn:schemas-microsoft-com:AdvancedSearchBox">Advanced Search</DisplayGroup> <ShowLanguageOptions xmlns="urn:schemas-microsoft-com:AdvancedSearchBox">false</ShowLanguageOptions> <LanguagesLabelText xmlns="urn:schemas-microsoft-com:AdvancedSearchBox" /> <ShowResultTypePicker xmlns="urn:schemas-microsoft-com:AdvancedSearchBox">true</ShowResultTypePicker> <ResultTypeLabelText xmlns="urn:schemas-microsoft-com:AdvancedSearchBox" /> <ShowPropertiesSection xmlns="urn:schemas-microsoft-com:AdvancedSearchBox">true</ShowPropertiesSection> <PropertiesSectionLabelText xmlns="urn:schemas-microsoft-com:AdvancedSearchBox">Add property restrictions...</PropertiesSectionLabelText> <Properties xmlns="urn:schemas-microsoft-com:AdvancedSearchBox">&lt;root xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"&gt;  &lt;LangDefs&gt;    &lt;LangDef DisplayName="Arabic" LangID="ar"/&gt;    &lt;LangDef DisplayName="Bengali" LangID="bn"/&gt;    &lt;LangDef DisplayName="Bulgarian" LangID="bg"/&gt;    &lt;LangDef DisplayName="Catalan" LangID="ca"/&gt;    &lt;LangDef DisplayName="Simplified Chinese" LangID="zh-cn"/&gt;    &lt;LangDef DisplayName="Traditional Chinese" LangID="zh-tw"/&gt;    &lt;LangDef DisplayName="Croatian" LangID="hr"/&gt;    &lt;LangDef DisplayName="Czech" LangID="cs"/&gt;    &lt;LangDef DisplayName="Danish" LangID="da"/&gt;    &lt;LangDef DisplayName="Dutch" LangID="nl"/&gt;    &lt;LangDef DisplayName="English" LangID="en"/&gt;    &lt;LangDef DisplayName="Finnish" LangID="fi"/&gt;    &lt;LangDef DisplayName="French" LangID="fr"/&gt;    &lt;LangDef DisplayName="German" LangID="de"/&gt;    &lt;LangDef DisplayName="Greek" LangID="el"/&gt;    &lt;LangDef DisplayName="Gujarati" LangID="gu"/&gt;    &lt;LangDef DisplayName="Hebrew" LangID="he"/&gt;    &lt;LangDef DisplayName="Hindi" LangID="hi"/&gt;    &lt;LangDef DisplayName="Hungarian" LangID="hu"/&gt;    &lt;LangDef DisplayName="Icelandic" LangID="is"/&gt;    &lt;LangDef DisplayName="Indonesian" LangID="id"/&gt;    &lt;LangDef DisplayName="Italian" LangID="it"/&gt;    &lt;LangDef DisplayName="Japanese" LangID="ja"/&gt;    &lt;LangDef DisplayName="Kannada" LangID="kn"/&gt;    &lt;LangDef DisplayName="Korean" LangID="ko"/&gt;    &lt;LangDef DisplayName="Latvian" LangID="lv"/&gt;    &lt;LangDef DisplayName="Lithuanian" LangID="lt"/&gt;    &lt;LangDef DisplayName="Malay" LangID="ms"/&gt;    &lt;LangDef DisplayName="Malayalam" LangID="ml"/&gt;    &lt;LangDef DisplayName="Marathi" LangID="mr"/&gt;    &lt;LangDef DisplayName="Norwegian" LangID="no"/&gt;    &lt;LangDef DisplayName="Polish" LangID="pl"/&gt;    &lt;LangDef DisplayName="Portuguese" LangID="pt"/&gt;    &lt;LangDef DisplayName="Punjabi" LangID="pa"/&gt;    &lt;LangDef DisplayName="Romanian" LangID="ro"/&gt;    &lt;LangDef DisplayName="Russian" LangID="ru"/&gt;    &lt;LangDef DisplayName="Slovak" LangID="sk"/&gt;    &lt;LangDef DisplayName="Slovenian" LangID="sl"/&gt;    &lt;LangDef DisplayName="Spanish" LangID="es"/&gt;    &lt;LangDef DisplayName="Swedish" LangID="sv"/&gt;    &lt;LangDef DisplayName="Tamil" LangID="ta"/&gt;    &lt;LangDef DisplayName="Telugu" LangID="te"/&gt;    &lt;LangDef DisplayName="Thai" LangID="th"/&gt;    &lt;LangDef DisplayName="Turkish" LangID="tr"/&gt;    &lt;LangDef DisplayName="Ukrainian" LangID="uk"/&gt;    &lt;LangDef DisplayName="Urdu" LangID="ur"/&gt;    &lt;LangDef DisplayName="Vietnamese" LangID="vi"/&gt;  &lt;/LangDefs&gt;  &lt;Languages&gt;    &lt;Language LangRef="en"/&gt;    &lt;Language LangRef="fr"/&gt;    &lt;Language LangRef="de"/&gt;    &lt;Language LangRef="ja"/&gt;    &lt;Language LangRef="zh-cn"/&gt;    &lt;Language LangRef="es"/&gt;    &lt;Language LangRef="zh-tw"/&gt;  &lt;/Languages&gt;  &lt;PropertyDefs&gt;    &lt;PropertyDef Name="Path" DataType="url" DisplayName="URL"/&gt;    &lt;PropertyDef Name="Size" DataType="integer" DisplayName="Size (bytes)"/&gt;    &lt;PropertyDef Name="Write" DataType="datetime" DisplayName="Last Modified Date"/&gt;    &lt;PropertyDef Name="FileName" DataType="text" DisplayName="Name"/&gt;    &lt;PropertyDef Name="Description" DataType="text" DisplayName="Description"/&gt;    &lt;PropertyDef Name="Title" DataType="text" DisplayName="Title"/&gt;    &lt;PropertyDef Name="Author" DataType="text" DisplayName="Author"/&gt;    &lt;PropertyDef Name="DocSubject" DataType="text" DisplayName="Subject"/&gt;    &lt;PropertyDef Name="DocKeywords" DataType="text" DisplayName="Keywords"/&gt;    &lt;PropertyDef Name="DocComments" DataType="text" DisplayName="Comments"/&gt;    &lt;PropertyDef Name="CreatedBy" DataType="text" DisplayName="Created By"/&gt;    &lt;PropertyDef Name="ModifiedBy" DataType="text" DisplayName="Last Modified By"/&gt;    &lt;PropertyDef Name="EmployeeNumber" DataType="text" DisplayName="EmployeeNumber"/&gt;    &lt;PropertyDef Name="EmployeeId" DataType="text" DisplayName="EmployeeId"/&gt;    &lt;PropertyDef Name="EmployeeFirstName" DataType="text" DisplayName="EmployeeFirstName"/&gt;    &lt;PropertyDef Name="EmployeeLastName" DataType="text" DisplayName="EmployeeLastName"/&gt;  &lt;/PropertyDefs&gt;  &lt;ResultTypes&gt;    &lt;ResultType DisplayName="Employee Document" Name="default"&gt;      &lt;KeywordQuery/&gt;      &lt;PropertyRef Name="EmployeeNumber" /&gt;      &lt;PropertyRef Name="EmployeeId" /&gt;      &lt;PropertyRef Name="EmployeeFirstName" /&gt;      &lt;PropertyRef Name="EmployeeLastName" /&gt;    &lt;/ResultType&gt;    &lt;ResultType DisplayName="All Results"&gt;      &lt;KeywordQuery/&gt;      &lt;PropertyRef Name="Author" /&gt;      &lt;PropertyRef Name="Description" /&gt;      &lt;PropertyRef Name="FileName" /&gt;      &lt;PropertyRef Name="Size" /&gt;      &lt;PropertyRef Name="Path" /&gt;      &lt;PropertyRef Name="Write" /&gt;      &lt;PropertyRef Name="CreatedBy" /&gt;      &lt;PropertyRef Name="ModifiedBy" /&gt;    &lt;/ResultType&gt;    &lt;ResultType DisplayName="Documents" Name="documents"&gt;      &lt;KeywordQuery&gt;IsDocument="True"&lt;/KeywordQuery&gt;      &lt;PropertyRef Name="Author" /&gt;      &lt;PropertyRef Name="DocComments"/&gt;      &lt;PropertyRef Name="Description" /&gt;      &lt;PropertyRef Name="DocKeywords"/&gt;      &lt;PropertyRef Name="FileName" /&gt;      &lt;PropertyRef Name="Size" /&gt;      &lt;PropertyRef Name="DocSubject"/&gt;      &lt;PropertyRef Name="Path" /&gt;      &lt;PropertyRef Name="Write" /&gt;      &lt;PropertyRef Name="CreatedBy" /&gt;      &lt;PropertyRef Name="ModifiedBy" /&gt;      &lt;PropertyRef Name="Title"/&gt;    &lt;/ResultType&gt;    &lt;ResultType DisplayName="Word Documents" Name="worddocuments"&gt;      &lt;KeywordQuery&gt;FileExtension="doc" OR FileExtension="docx" OR FileExtension="dot" OR FileExtension="docm" OR FileExtension="odt"&lt;/KeywordQuery&gt;      &lt;PropertyRef Name="Author" /&gt;      &lt;PropertyRef Name="DocComments"/&gt;      &lt;PropertyRef Name="Description" /&gt;      &lt;PropertyRef Name="DocKeywords"/&gt;      &lt;PropertyRef Name="FileName" /&gt;      &lt;PropertyRef Name="Size" /&gt;      &lt;PropertyRef Name="DocSubject"/&gt;      &lt;PropertyRef Name="Path" /&gt;      &lt;PropertyRef Name="Write" /&gt;      &lt;PropertyRef Name="CreatedBy" /&gt;      &lt;PropertyRef Name="ModifiedBy" /&gt;      &lt;PropertyRef Name="Title"/&gt;    &lt;/ResultType&gt;    &lt;ResultType DisplayName="Excel Documents" Name="exceldocuments"&gt;      &lt;KeywordQuery&gt;FileExtension="xls" OR FileExtension="xlsx" OR FileExtension="xlsm" OR FileExtension="xlsb" OR FileExtension="ods"&lt;/KeywordQuery&gt;      &lt;PropertyRef Name="Author" /&gt;      &lt;PropertyRef Name="DocComments"/&gt;      &lt;PropertyRef Name="Description" /&gt;      &lt;PropertyRef Name="DocKeywords"/&gt;      &lt;PropertyRef Name="FileName" /&gt;      &lt;PropertyRef Name="Size" /&gt;      &lt;PropertyRef Name="DocSubject"/&gt;      &lt;PropertyRef Name="Path" /&gt;      &lt;PropertyRef Name="Write" /&gt;      &lt;PropertyRef Name="CreatedBy" /&gt;      &lt;PropertyRef Name="ModifiedBy" /&gt;      &lt;PropertyRef Name="Title"/&gt;    &lt;/ResultType&gt;    &lt;ResultType DisplayName="PowerPoint Presentations" Name="presentations"&gt;      &lt;KeywordQuery&gt;FileExtension="ppt" OR FileExtension="pptx" OR FileExtension="pptm" OR FileExtension="odp"&lt;/KeywordQuery&gt;      &lt;PropertyRef Name="Author" /&gt;      &lt;PropertyRef Name="DocComments"/&gt;      &lt;PropertyRef Name="Description" /&gt;      &lt;PropertyRef Name="DocKeywords"/&gt;      &lt;PropertyRef Name="FileName" /&gt;      &lt;PropertyRef Name="Size" /&gt;      &lt;PropertyRef Name="DocSubject"/&gt;      &lt;PropertyRef Name="Path" /&gt;      &lt;PropertyRef Name="Write" /&gt;      &lt;PropertyRef Name="CreatedBy" /&gt;      &lt;PropertyRef Name="ModifiedBy" /&gt;      &lt;PropertyRef Name="Title"/&gt;    &lt;/ResultType&gt;  &lt;/ResultTypes&gt;&lt;/root&gt;</Properties> </WebPart> ]]> </AllUsersWebPart> </File> 5.Deploy your custom solution and you will have a custom advanced search page.

    Read the article

  • New version of SQL Server Data Tools is now available

    - by jamiet
    If you don’t follow the SQL Server Data Tools (SSDT) blog then you may not know that two days ago an updated version of SSDT was released (and by SSDT I mean the database projects, not the SSIS/SSRS/SSAS stuff) along with a new version of the SSDT Power Tools. This release incorporates a an updated version of the SQL Server Data Tier Application Framework (aka DAC Framework, aka DacFX) which you can read about on Adam Mahood’s blog post SQL Server Data-Tier Application Framework (September 2012) Available. DacFX is essentially all the gubbins that you need to extract and publish .dacpacs and according to Adam’s post it incorporates a new feature that I think is very interesting indeed: Extract DACPAC with data – Creates a database snapshot file (.dacpac) from a live SQL Server or Windows Azure SQL Database that contains data from user tables in addition to the database schema. These packages can be published to a new or existing SQL Server or Windows Azure SQL Database using the SqlPackage.exe Publish action. Data contained in package replaces the existing data in the target database. In short, .dacpacs can now include data as well as schema. I’m very excited about this because one of my long-standing complaints about SSDT (and its many forebears) is that whilst it has great support for declarative development of schema it does not provide anything similar for data – if you want to deploy data from your SSDT projects then you have to write Post-Deployment MERGE scripts. This new feature for .dacpacs does not change that situation yet however it is a very important pre-requisite so I am hoping that a feature to provide declaration of data (in addition to declaration of schema which we have today) is going to light up in SSDT in the not too distant future. Read more about the latest SSDT, Power Tools & DacFX releases at: Now available: SQL Server Data Tools - September 2012 update! by Janet Yeilding New SSDT Power Tools! Now for both Visual Studio 2010 and Visual Studio 2012 by Sarah McDevitt SQL Server Data-Tier Application Framework (September 2012) Available by Adam Mahood @Jamiet

    Read the article

  • SQL SERVER – Get Date and Time From Current DateTime – SQL in Sixty Seconds #025 – Video

    - by pinaldave
    This is 25th video of series SQL in Sixty Seconds we started a few months ago. Even though this is 25th video it seems like we have just started this few days ago. The best part of this SQL in Sixty Seconds is that one can learn something new in less than sixty seconds. There are many concepts which are not new for many but just we all have 60 seconds to refresh our memories. In this video I have touched a very simple question which I receive very frequently on this blog. Q1) How to get current date time? Q2) How to get Only Date from datetime? Q3) How to get Only Time from datetime? I have created a sixty second video on this subject and hopefully this will help many beginners in the SQL Server field. This sixty second video describes the same. Here is a similar script which I have used in the video. SELECT GETDATE() GO -- SQL Server 2000/2005 SELECT CONVERT(VARCHAR(8),GETDATE(),108) AS HourMinuteSecond, CONVERT(VARCHAR(8),GETDATE(),101) AS DateOnly; GO -- SQL Server 2008 Onwards SELECT CONVERT(TIME,GETDATE()) AS HourMinuteSeconds; SELECT CONVERT(DATE,GETDATE()) AS DateOnly; GO Related Tips in SQL in Sixty Seconds: Retrieve Current Date Time in SQL Server CURRENT_TIMESTAMP, GETDATE(), {fn NOW()} Get Time in Hour:Minute Format from a Datetime – Get Date Part Only from Datetime Get Current System Date Time Get Date Time in Any Format – UDF – User Defined Functions Date and Time Functions – EOMONTH() – A Quick Introduction DATE and TIME in SQL Server 2008 I encourage you to submit your ideas for SQL in Sixty Seconds. We will try to accommodate as many as we can. If we like your idea we promise to share with you educational material. Image Credit: Movie Gone in 60 Seconds Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Database, Pinal Dave, PostADay, SQL, SQL Authority, SQL in Sixty Seconds, SQL Query, SQL Scripts, SQL Server, SQL Server Management Studio, SQL Tips and Tricks, T SQL, Technology, Video

    Read the article

  • SQL SERVER – Cardinality Estimation and Performance – SQL in Sixty Seconds #072

    - by Pinal Dave
    Yesterday I wrote blog post based on my latest Pluralsight course on learning SQL Server 2014. I discussed newly introduced cardinality estimation in SQL Server 2014 and how it improves the performance of the query. The cardinality estimation logic is responsible for quality of query plans and majorly responsible for improving performance for any query. This logic was not updated for quite a while, but in the latest version of SQL Server 2104 this logic is re-designed. The new logic now incorporates various assumptions and algorithms of OLTP and warehousing workload. I hope my earlier blog post clearly explained how new cardinality estimation logic improves performance. If not, I suggest you watch following quick video where I explain this concept in extremely simple words. You can download the code used in this course from Simple Demo of New Cardinality Estimation Features of SQL Server 2014. Action Item Here are the blog posts I have previously written. You can read it over here: Simple Demo of New Cardinality Estimation Features of SQL Server 2014 Pluralsight Course You can subscribe to my YouTube Channel for frequent updates. Reference: Pinal Dave (http://blog.sqlauthority.com)Filed under: PostADay, SQL, SQL Authority, SQL Performance, SQL Query, SQL Server, SQL Server Management Studio, SQL Tips and Tricks, T SQL, Video

    Read the article

  • SQL SERVER – Display Datetime in Specific Format – SQL in Sixty Seconds #033 – Video

    - by pinaldave
    A very common requirement of developers is to format datetime to their specific need. Every geographic location has different need of the date formats. Some countries follow the standard of mm/dd/yy and some countries as dd/mm/yy. The need of developer changes as geographic location changes. In SQL Server there are various functions to aid this requirement. There is function CAST, which developers have been using for a long time as well function CONVERT which is a more enhanced version of CAST. In the latest version of SQL Server 2012 a new function FORMAT is introduced as well. In this SQL in Sixty Seconds video we cover two different methods to display the datetime in specific format. 1) CONVERT function and 2) FORMAT function. Let me know what you think of this video. Here is the script which is used in the video: -- http://blog.SQLAuthority.com -- SQL Server 2000/2005/2008/2012 onwards -- Datetime SELECT CONVERT(VARCHAR(30),GETDATE()) AS DateConvert; SELECT CONVERT(VARCHAR(30),GETDATE(),10) AS DateConvert; SELECT CONVERT(VARCHAR(30),GETDATE(),110) AS DateConvert; SELECT CONVERT(VARCHAR(30),GETDATE(),5) AS DateConvert; SELECT CONVERT(VARCHAR(30),GETDATE(),105) AS DateConvert; SELECT CONVERT(VARCHAR(30),GETDATE(),113) AS DateConvert; SELECT CONVERT(VARCHAR(30),GETDATE(),114) AS DateConvert; GO -- SQL Server 2012 onwards -- Various format of Datetime SELECT CONVERT(VARCHAR(30),GETDATE(),113) AS DateConvert; SELECT FORMAT ( GETDATE(), 'dd mon yyyy HH:m:ss:mmm', 'en-US' ) AS DateConvert; SELECT CONVERT(VARCHAR(30),GETDATE(),114) AS DateConvert; SELECT FORMAT ( GETDATE(), 'HH:m:ss:mmm', 'en-US' ) AS DateConvert; GO -- Specific usage of Format function SELECT FORMAT(GETDATE(), N'"Current Time is "dddd MMMM dd, yyyy', 'en-US') AS CurrentTimeString; This video discusses CONVERT and FORMAT in simple manner but the subject is much deeper and there are lots of information to cover along with it. I strongly suggest that you go over related blog posts in next section as there are wealth of knowledge discussed there. Related Tips in SQL in Sixty Seconds: Get Date and Time From Current DateTime – SQL in Sixty Seconds #025 Retrieve – Select Only Date Part From DateTime – Best Practice Get Time in Hour:Minute Format from a Datetime – Get Date Part Only from Datetime DATE and TIME in SQL Server 2008 Function to Round Up Time to Nearest Minutes Interval Get Date Time in Any Format – UDF – User Defined Functions Retrieve – Select Only Date Part From DateTime – Best Practice – Part 2 Difference Between DATETIME and DATETIME2 Saturday Fun Puzzle with SQL Server DATETIME2 and CAST What would you like to see in the next SQL in Sixty Seconds video? Reference: Pinal Dave (http://blog.sqlauthority.com)   Filed under: Database, Pinal Dave, PostADay, SQL, SQL Authority, SQL in Sixty Seconds, SQL Query, SQL Scripts, SQL Server, SQL Server Management Studio, SQL Tips and Tricks, T SQL, Technology, Video Tagged: Excel

    Read the article

  • Android Studio Could not call IncrementalTask.taskAction() on task ':project:dexDebug'

    - by akenawell85x
    I recently decided to switch from Eclipse to Android Studio. I imported a project I was working on and am now getting this error when I try to run the project. Gradle: Execution failed for task ':project:dexDebug'. > Could not call IncrementalTask.taskAction() on task ':project:dexDebug' I've been cruising this site for 2 days now and trying different suggestions to no avail. I did run gradlew compileDebug --stacktrace and this is what I got: C:\Users\adam\AndroidStudioProjects\projectProject>gradlew compileDebug --stacktrace Relying on packaging to define the extension of the main artifact has been deprecated and is scheduled to be removed in Gradle 2.0 :project:preBuild UP-TO-DATE :project:preDebugBuild UP-TO-DATE :project:preReleaseBuild UP-TO-DATE :project:prepareComAndroidSupportAppcompatV71800Library UP-TO-DATE :project:prepareComGoogleAndroidGmsPlayServices3225Library UP-TO-DATE :project:prepareDebugDependencies :project:compileDebugAidl UP-TO-DATE :project:compileDebugRenderscript UP-TO-DATE :project:generateDebugBuildConfig UP-TO-DATE :project:mergeDebugAssets UP-TO-DATE :project:mergeDebugResources UP-TO-DATE :project:processDebugManifest UP-TO-DATE :project:processDebugResources UP-TO-DATE :project:generateDebugSources UP-TO-DATE :project:compileDebug UP-TO-DATE BUILD SUCCESSFUL Total time: 10.459 secs However I am still getting that error when I try to actually run the project. Here is my build.gradle (i do have a 'libs' folder in my project with all the jars for a google maps/places app): buildscript { repositories { mavenCentral() } dependencies { classpath 'com.android.tools.build:gradle:0.6.+' } } apply plugin: 'android' repositories { mavenCentral() } android { compileSdkVersion 18 buildToolsVersion "18.1.1" defaultConfig { minSdkVersion 8 targetSdkVersion 18 } } dependencies { compile fileTree(dir: 'libs') compile 'com.google.android.gms:play-services:3.2.25' compile 'com.android.support:support-v4:18.0.0' compile 'com.android.support:appcompat-v7:+' } and my settings.gradle: include ':project', ':project:libs:android-support-v4', ':project:libs:google-api-client-1.10.3-beta', ':project:libs:google-api-client-android2-1.10.3-beta', ':project:libs:google-http-client-1.10.3-beta', ':project:libs:google-http-client-android2-1.10.3-beta', ':project:libs:google-oauth-client-1.10.1-beta', ':project:libs:gson-2.1', ':project:libs:guava-11.0.1', ':project:libs:jackson-core-asl-1.9.4', ':project:libs:jsr305-1.3.9', ':project:libs:protobuf-java-2.2.0', ':project:libs:GoogleAdMobAdsSdk-6.4.1' As I said, I've tried pretty much everything I have read on here about this error and am having no luck. Any help would be greatly appreciated.

    Read the article

  • Keeping up with SQL Server cumulative updates

    - by AaronBertrand
    Yesterday, a conversation on twitter reminded me that I haven't been keeping up with posting cumulative updates. I missed these updates for SQL Server 2008 on March 15: Cumulative Update #7 for SQL Server 2008 SP1 (10.00.2766) Cumulative Update #10 for SQL Server 2008 RTM (10.00.1835) And yesterday Glenn Berry ( blog | twitter ) was the first I know of to blog about Cumulative Update #9 for SQL Server 2005 SP3 (9.00.4294). He also shares some interesting information about changes to the support policy...(read more)

    Read the article

  • SQL Server 2008 cluster freezing

    - by Ed Leighton-Dick
    We have run into a strange situation in which a SQL Server 2008 single-node cluster hangs. As background, we are rebuilding a Windows Server 2003/SQL Server 2005 two-node cluster using Windows 2008 and SQL Server 2008. Here's the timeline: Evicted the passive node (server B) from the Windows 2003/SQL 2005 cluster. The active node now functions as a single-node cluster with no problems. Wiped server B's disks and installed Windows 2008 and SQL Server 2008 as a single-node cluster. Since we do not want to the two clusters to communicate yet, we left the cluster's private network "heartbeat" adapter unconfigured. The cluster comes up and functions normally. Moved all databases to the new cluster. Cluster continues to function normally. Turned off server A (old cluster) in preparation for rebuilding as the second node of the new cluster. SQL Server instance on server B (new cluster) locks up, even though it should have no knowledge of or interaction with server A. Restarted server A. SQL Server instance on server B (new cluster) immediately begins working again. Things we have tried: The new cluster's name responds to ping and NETBIOS requests, even while the SQL Server is hung. We have confirmed that no IP address is assigned to the old heartbeat adapter, and it is not pulling an IP address from DHCP. Disabling the heartbeat's network card has the same effect. No errors were generated in any logs - Windows or SQL. When the error first occurred, it sat in the hung state for quite some time (well over 10 minutes) before anyone figured out what was going on. This would seem to eliminate any sort of normal cluster timeout in which it would have been searching for the other node (even if one had been configured). Server B is running Windows 2008 SP2, fully patched, and SQL Server 2008 SP1 CU7 (10.0.2775).

    Read the article

  • Fraud Detection with the SQL Server Suite Part 2

    - by Dejan Sarka
    This is the second part of the fraud detection whitepaper. You can find the first part in my previous blog post about this topic. My Approach to Data Mining Projects It is impossible to evaluate the time and money needed for a complete fraud detection infrastructure in advance. Personally, I do not know the customer’s data in advance. I don’t know whether there is already an existing infrastructure, like a data warehouse, in place, or whether we would need to build one from scratch. Therefore, I always suggest to start with a proof-of-concept (POC) project. A POC takes something between 5 and 10 working days, and involves personnel from the customer’s site – either employees or outsourced consultants. The team should include a subject matter expert (SME) and at least one information technology (IT) expert. The SME must be familiar with both the domain in question as well as the meaning of data at hand, while the IT expert should be familiar with the structure of data, how to access it, and have some programming (preferably Transact-SQL) knowledge. With more than one IT expert the most time consuming work, namely data preparation and overview, can be completed sooner. I assume that the relevant data is already extracted and available at the very beginning of the POC project. If a customer wants to have their people involved in the project directly and requests the transfer of knowledge, the project begins with training. I strongly advise this approach as it offers the establishment of a common background for all people involved, the understanding of how the algorithms work and the understanding of how the results should be interpreted, a way of becoming familiar with the SQL Server suite, and more. Once the data has been extracted, the customer’s SME (i.e. the analyst), and the IT expert assigned to the project will learn how to prepare the data in an efficient manner. Together with me, knowledge and expertise allow us to focus immediately on the most interesting attributes and identify any additional, calculated, ones soon after. By employing our programming knowledge, we can, for example, prepare tens of derived variables, detect outliers, identify the relationships between pairs of input variables, and more, in only two or three days, depending on the quantity and the quality of input data. I favor the customer’s decision of assigning additional personnel to the project. For example, I actually prefer to work with two teams simultaneously. I demonstrate and explain the subject matter by applying techniques directly on the data managed by each team, and then both teams continue to work on the data overview and data preparation under our supervision. I explain to the teams what kind of results we expect, the reasons why they are needed, and how to achieve them. Afterwards we review and explain the results, and continue with new instructions, until we resolve all known problems. Simultaneously with the data preparation the data overview is performed. The logic behind this task is the same – again I show to the teams involved the expected results, how to achieve them and what they mean. This is also done in multiple cycles as is the case with data preparation, because, quite frankly, both tasks are completely interleaved. A specific objective of the data overview is of principal importance – it is represented by a simple star schema and a simple OLAP cube that will first of all simplify data discovery and interpretation of the results, and will also prove useful in the following tasks. The presence of the customer’s SME is the key to resolving possible issues with the actual meaning of the data. We can always replace the IT part of the team with another database developer; however, we cannot conduct this kind of a project without the customer’s SME. After the data preparation and when the data overview is available, we begin the scientific part of the project. I assist the team in developing a variety of models, and in interpreting the results. The results are presented graphically, in an intuitive way. While it is possible to interpret the results on the fly, a much more appropriate alternative is possible if the initial training was also performed, because it allows the customer’s personnel to interpret the results by themselves, with only some guidance from me. The models are evaluated immediately by using several different techniques. One of the techniques includes evaluation over time, where we use an OLAP cube. After evaluating the models, we select the most appropriate model to be deployed for a production test; this allows the team to understand the deployment process. There are many possibilities of deploying data mining models into production; at the POC stage, we select the one that can be completed quickly. Typically, this means that we add the mining model as an additional dimension to an existing DW or OLAP cube, or to the OLAP cube developed during the data overview phase. Finally, we spend some time presenting the results of the POC project to the stakeholders and managers. Even from a POC, the customer will receive lots of benefits, all at the sole risk of spending money and time for a single 5 to 10 day project: The customer learns the basic patterns of frauds and fraud detection The customer learns how to do the entire cycle with their own people, only relying on me for the most complex problems The customer’s analysts learn how to perform much more in-depth analyses than they ever thought possible The customer’s IT experts learn how to perform data extraction and preparation much more efficiently than they did before All of the attendees of this training learn how to use their own creativity to implement further improvements of the process and procedures, even after the solution has been deployed to production The POC output for a smaller company or for a subsidiary of a larger company can actually be considered a finished, production-ready solution It is possible to utilize the results of the POC project at subsidiary level, as a finished POC project for the entire enterprise Typically, the project results in several important “side effects” Improved data quality Improved employee job satisfaction, as they are able to proactively contribute to the central knowledge about fraud patterns in the organization Because eventually more minds get to be involved in the enterprise, the company should expect more and better fraud detection patterns After the POC project is completed as described above, the actual project would not need months of engagement from my side. This is possible due to our preference to transfer the knowledge onto the customer’s employees: typically, the customer will use the results of the POC project for some time, and only engage me again to complete the project, or to ask for additional expertise if the complexity of the problem increases significantly. I usually expect to perform the following tasks: Establish the final infrastructure to measure the efficiency of the deployed models Deploy the models in additional scenarios Through reports By including Data Mining Extensions (DMX) queries in OLTP applications to support real-time early warnings Include data mining models as dimensions in OLAP cubes, if this was not done already during the POC project Create smart ETL applications that divert suspicious data for immediate or later inspection I would also offer to investigate how the outcome could be transferred automatically to the central system; for instance, if the POC project was performed in a subsidiary whereas a central system is available as well Of course, for the actual project, I would repeat the data and model preparation as needed It is virtually impossible to tell in advance how much time the deployment would take, before we decide together with customer what exactly the deployment process should cover. Without considering the deployment part, and with the POC project conducted as suggested above (including the transfer of knowledge), the actual project should still only take additional 5 to 10 days. The approximate timeline for the POC project is, as follows: 1-2 days of training 2-3 days for data preparation and data overview 2 days for creating and evaluating the models 1 day for initial preparation of the continuous learning infrastructure 1 day for presentation of the results and discussion of further actions Quite frequently I receive the following question: are we going to find the best possible model during the POC project, or during the actual project? My answer is always quite simple: I do not know. Maybe, if we would spend just one hour more for data preparation, or create just one more model, we could get better patterns and predictions. However, we simply must stop somewhere, and the best possible way to do this, according to my experience, is to restrict the time spent on the project in advance, after an agreement with the customer. You must also never forget that, because we build the complete learning infrastructure and transfer the knowledge, the customer will be capable of doing further investigations independently and improve the models and predictions over time without the need for a constant engagement with me.

    Read the article

  • SQLAuthority News – Feature Pack for Microsoft SQL Server 2005 SP4

    - by pinaldave
    If you are still using SQL Server 2005 – I suggest that you consider migrating to later version of the SQL Server 2008/2008 R2. Due to any reason, you wanted to continue using SQL Server 2005, I suggest that you take a look at the Feature Pack for Microsoft SQL Server 2005 SP4. There are many different tools and features available in pack, which can be very handy and can solve issues. Microsoft ADOMD.NET Microsoft Core XML Services (MSXML) 6.0 Microsoft OLEDB Provider for DB2 Microsoft SQL Server Management Pack for MOM 2005 Microsoft SQL Server 2000 PivotTable Services Microsoft SQL Server 2000 DTS Designer Components Microsoft SQL Server Native Client Microsoft SQL Server 2005 Analysis Services 9.0 OLE DB Provider Microsoft SQL Server 2005 Backward Compatibility Components Microsoft SQL Server 2005 Command Line Query Utility Microsoft SQL Server 2005 Datamining Viewer Controls Microsoft SQL Server 2005 JDBC Driver Microsoft SQL Server 2005 Management Objects Collection Microsoft SQL Server 2005 Compact Edition Microsoft SQL Server 2005 Notification Services Client Components Microsoft SQL Server 2005 Upgrade Advisor Microsoft .NET Data Provider for mySAP Business Suite, Preview Version Reporting Add-In for Microsoft Visual Web Developer 2005 Express Microsoft Exception Message Box Data Mining Managed Plug-in Algorithm API for SQL Server 2005 Microsoft SQL Server 2005 Reporting Services Add-in for Microsoft SharePoint Technologies Microsoft SQL Server 2005 Data Mining Add-ins for Microsoft Office 2007 SQL Server 2005 Performance Dashboard Reports SQL Server 2005 Best Practices Analyzer Download Feature Pack for Microsoft SQL Server 2005 SP4 Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: SQL, SQL Authority, SQL Documentation, SQL Download, SQL Query, SQL Server, SQL Service Pack, SQL Tips and Tricks, SQLAuthority News, T SQL, Technology

    Read the article

  • How to install SharePoint Server 2013 Preview

    - by ybbest
    The Office 2013 and SharePoint Server 2013 Preview is announced yesterday and as a SharePoint Developer, I am really excited to learn all the new features and capabilities. Today I will show you how to install the preview. 1. Create a service account called SP2013Install and give this account Dbcreator and SecurityAdmin in SQL Server 2012 2. You need to run the following script to set the ‘maxdegree of parellism’ setting to the required value of 1 in SQL Server 2012(using sysadmin privilege) before configure the SharePoint Farm. Otherwise , you might get the error ‘This SQL Server Instance does not have the required maxdegree of parellism setting of 1’ sp_configure 'show advanced options', 1; GO RECONFIGURE WITH OVERRIDE; GO sp_configure 'max degree of parallelism', 1; GO RECONFIGURE WITH OVERRIDE; GO 3. Download the SharePoint preview from here and I am going to install it on Windows Server 2008R2 with SQL2012. 4. Click the Install software prerequisites, this works fine with the internet connection. (However, if you do not have internet connection, it is a bit tricky to install window azure AppFabric as it has to be installed using the prerequisite installer. Your computer might reboot a few times in the process.) 5.After the prerequisites are installed `completely, you can then install the Preview. Click the Install SharePoint Server and Enter the Product key you get from the Preview download page. 6. Accept the License terms and Click Next. 7. Leave the default path for the file location. 8. You can now start the installation process 9. After binary files are installed, you then can configure your farm using the farm configuration wizard. 10.Specify the Database server and the install account 11. Specify SharePoint farm passphrase. 12 Specify the port number , you should choose your own favorite port number. 13. Choose Create a New Server Farm and click next. 14. Double-check with the settings and click Next to Configure the farm install. 15. Finally, your farm is configured successfully and you now are able to go to your Central Admin site http://sp2010:6666/ 16. You should configure the services manually or automate using PowerShell (If you like to understand why,you can read the blog post here) ,however I will use the wizard to configure automatically here  as  this is a test machine. After the configuration is complete, you now be able to see your SharePoint Site. 17.To start the evaluate the Preview , you need to install Visual Studio 2012 RC , Microsoft Office Developer Tools for Visual Studio 2012,SharePoint 2013 Designer Preview , Office 2013 Preview. References: Download SharePoint2013 Server 2013 Download Microsoft Visio Professional 2013 Preview Install SharePoint 2013 Preview Hardware and software requirements for SharePoint 2013 Preview SharePoint 2013 IT Pro and Developer training materials released Plan for SharePoint 2013 Preview Microsoft Office Developer Tools for Visual Studio 2012 SharePoint 2013 Preview Office365 for the SharePoint 2013 preview SharePoint Designer 2013 Download: Microsoft Office 2013 Preview Language Pack Try Office

    Read the article

  • How to install SharePoint Server 2013 Preview

    - by ybbest
    The Office 2013 and SharePoint Server 2013 Preview is announced yesterday and as a SharePoint Developer, I am really excited to learn all the new features and capabilities. Today I will show you how to install the preview. 1. Create a service account called SP2013Install and give this account Dbcreator and SecurityAdmin in SQL Server 2012 2. You need to run the following script to set the ‘maxdegree of parellism’ setting to the required value of 1 in SQL Server 2012(using sysadmin privilege) before configure the SharePoint Farm. Otherwise , you might get the error ‘This SQL Server Instance does not have the required maxdegree of parellism setting of 1’ sp_configure 'show advanced options', 1; GO RECONFIGURE WITH OVERRIDE; GO sp_configure 'max degree of parallelism', 1; GO RECONFIGURE WITH OVERRIDE; GO 3. Download the SharePoint preview from here and I am going to install it on Windows Server 2008R2 with SQL2012. 4. Click the Install software prerequisites, this works fine with the internet connection. (However, if you do not have internet connection, it is a bit tricky to install window azure AppFabric as it has to be installed using the prerequisite installer. Your computer might reboot a few times in the process.) 5.After the prerequisites are installed `completely, you can then install the Preview. Click the Install SharePoint Server and Enter the Product key you get from the Preview download page. 6. Accept the License terms and Click Next. 7. Leave the default path for the file location. 8. You can now start the installation process 9. After binary files are installed, you then can configure your farm using the farm configuration wizard. 10.Specify the Database server and the install account 11. Specify SharePoint farm passphrase. 12 Specify the port number , you should choose your own favorite port number. 13. Choose Create a New Server Farm and click next. 14. Double-check with the settings and click Next to Configure the farm install. 15. Finally, your farm is configured successfully and you now are able to go to your Central Admin site http://sp2010:6666/ 16. You should configure the services manually or automate using PowerShell (If you like to understand why,you can read the blog post here) ,however I will use the wizard to configure automatically here  as  this is a test machine. After the configuration is complete, you now be able to see your SharePoint Site. 17.To start the evaluate the Preview , you need to install Visual Studio 2012 RC , Microsoft Office Developer Tools for Visual Studio 2012,SharePoint 2013 Designer Preview , Office 2013 Preview. References: Download SharePoint2013 Server 2013 Download Microsoft Visio Professional 2013 Preview Install SharePoint 2013 Preview Hardware and software requirements for SharePoint 2013 Preview SharePoint 2013 IT Pro and Developer training materials released Plan for SharePoint 2013 Preview Microsoft Office Developer Tools for Visual Studio 2012 SharePoint 2013 Preview Office365 for the SharePoint 2013 preview SharePoint Designer 2013 Download: Microsoft Office 2013 Preview Language Pack Try Office

    Read the article

  • SQL SERVER – SSMS: Memory Usage By Memory Optimized Objects Report

    - by Pinal Dave
    At conferences and at speaking engagements at the local UG, there is one question that keeps on coming which I wish were never asked. The question around, “Why is SQL Server using up all the memory and not releasing even when idle?” Well, the answer can be long and with the release of SQL Server 2014, this got even more complicated. This release of SQL Server 2014 has the option of introducing In-Memory OLTP which is completely new concept and our dependency on memory has increased multifold. In reality, nothing much changes but we have memory optimized objects (Tables and Stored Procedures) additional which are residing completely in memory and improving performance. As a DBA, it is humanly impossible to get a hang of all the innovations and the new features introduced in the next version. So today’s blog is around the report added to SSMS which gives a high level view of this new feature addition. This reports is available only from SQL Server 2014 onwards because the feature was introduced in SQL Server 2014. Earlier versions of SQL Server Management Studio would not show the report in the list. If we try to launch the report on the database which is not having In-Memory File group defined, then we would see the message in report. To demonstrate, I have created new fresh database called MemoryOptimizedDB with no special file group. Here is the query used to identify whether a database has memory-optimized file group or not. SELECT TOP(1) 1 FROM sys.filegroups FG WHERE FG.[type] = 'FX' Once we add filegroup using below command, we would see different version of report. USE [master] GO ALTER DATABASE [MemoryOptimizedDB] ADD FILEGROUP [IMO_FG] CONTAINS MEMORY_OPTIMIZED_DATA GO The report is still empty because we have not defined any Memory Optimized table in the database.  Total allocated size is shown as 0 MB. Now, let’s add the folder location into the filegroup and also created few in-memory tables. We have used the nomenclature of IMO to denote “InMemory Optimized” objects. USE [master] GO ALTER DATABASE [MemoryOptimizedDB] ADD FILE ( NAME = N'MemoryOptimizedDB_IMO', FILENAME = N'E:\Program Files\Microsoft SQL Server\MSSQL12.SQL2014\MSSQL\DATA\MemoryOptimizedDB_IMO') TO FILEGROUP [IMO_FG] GO You may have to change the path based on your SQL Server configuration. Below is the script to create the table. USE MemoryOptimizedDB GO --Drop table if it already exists. IF OBJECT_ID('dbo.SQLAuthority','U') IS NOT NULL DROP TABLE dbo.SQLAuthority GO CREATE TABLE dbo.SQLAuthority ( ID INT IDENTITY NOT NULL, Name CHAR(500)  COLLATE Latin1_General_100_BIN2 NOT NULL DEFAULT 'Pinal', CONSTRAINT PK_SQLAuthority_ID PRIMARY KEY NONCLUSTERED (ID), INDEX hash_index_sample_memoryoptimizedtable_c2 HASH (Name) WITH (BUCKET_COUNT = 131072) ) WITH (MEMORY_OPTIMIZED = ON, DURABILITY = SCHEMA_AND_DATA) GO As soon as above script is executed, table and index both are created. If we run the report again, we would see something like below. Notice that table memory is zero but index is using memory. This is due to the fact that hash index needs memory to manage the buckets created. So even if table is empty, index would consume memory. More about the internals of how In-Memory indexes and tables work will be reserved for future posts. Now, use below script to populate the table with 10000 rows INSERT INTO SQLAuthority VALUES (DEFAULT) GO 10000 Here is the same report after inserting 1000 rows into our InMemory table.    There are total three sections in the whole report. Total Memory consumed by In-Memory Objects Pie chart showing memory distribution based on type of consumer – table, index and system. Details of memory usage by each table. The information about all three is taken from one single DMV, sys.dm_db_xtp_table_memory_stats This DMV contains memory usage statistics for both user and system In-Memory tables. If we query the DMV and look at data, we can easily notice that the system tables have negative object IDs.  So, to look at user table memory usage, below is the over-simplified version of query. USE MemoryOptimizedDB GO SELECT OBJECT_NAME(OBJECT_ID), * FROM sys.dm_db_xtp_table_memory_stats WHERE OBJECT_ID > 0 GO This report would help DBA to identify which in-memory object taking lot of memory which can be used as a pointer for designing solution. I am sure in future we will discuss at lengths the whole concept of In-Memory tables in detail over this blog. To read more about In-Memory OLTP, have a look at In-Memory OLTP Series at Balmukund’s Blog. Reference: Pinal Dave (http://blog.sqlauthority.com)Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Server Management Studio, SQL Tips and Tricks, T SQL Tagged: SQL Memory, SQL Reports

    Read the article

  • Getting started with Team Foundation Server

    - by joe
    At work, we recently started using Team Foundation Server to manage our source code, i have no idea how to use this system. I do not know even know how to check source code in and out. Does anyone know of a step-by-step tutorial on how to work with TFS? Just for basic operations e.g. get latest version, upload your changes, etc. I am accessing it from Visual Studio 2010. I also have access to the TFS web interface.

    Read the article

< Previous Page | 8 9 10 11 12 13 14 15 16 17 18 19  | Next Page >