Search Results

Search found 1744 results on 70 pages for 'steven don'.

Page 12/70 | < Previous Page | 8 9 10 11 12 13 14 15 16 17 18 19  | Next Page >

  • screen saver issue

    - by Steven
    When i leave my pc alone for while the screens turns black which is fine, when i return and move my mouse it comes back on but my second screen stays black and my first screen has a blue overlay over the top of the unlock screen. I believe this is to do with my dual screens on gts450. screen 1 is 1920*1080 screen 2 is 1024*768 the blue over lay is on screen one and looks to be the size of screen 2 I can out the password in and press enter and then everything goes back to normal, but how do i fix this issue of a blue overlay stopping me seeing whats on screen.

    Read the article

  • secure boot windows 8 issues it hates ubuntu :(

    - by Steven Brown
    im running into issues with windows 8. ok so i disabled secure boot from my laptop. i tell it to launch from my USB with ubuntu installed on it and it wont boot. just simply light my screen and darken it. iv google the fire out of this and no use so im asking for help. im useing ubuntu 13.04. more details: well i have tryed to boot another OS (zorin) and it hates it too. i dont know why my secure boot wont shut off. if it helps i have a HP 2000.

    Read the article

  • From Bluehost to WP Engine, My WordPress Story

    - by thatjeffsmith
    This is probably the longest blog post I’ve written in a LONG time. And if you’re used to coming here for the Oracle stuff, this post is not about that. It’s about my blog, and the stuff under the hood that makes it run, AKA WordPress. If you want to skip to the juicy stuff, then use these shortcuts: My Site Slowed Down How I Moved to WP Engine How WP Engine ‘Hooked’ Me Why WP Engine? I started thatJeffSmith.com on May 28th, 2010. I had been already been blogging for several years, but a couple of really smart people I respected (Andy, Brent – thanks again!) suggested that I take ownership of my content and begin building my personal brand. I thought that was a good idea, and so I signed up for service with bluehost. Bluehost makes setting up a WordPress site very, very easy. And, they continued to be easy to work with for the past 2 years. I would even recommend them to anyone looking to host their own WordPress install/site. For $83.40, I purchased a year’s worth of service and my domain name registration – a very good value. And then last year I paid $107.40 for another year’s services. And when that year expired I paid another $190.80 for an additional two year’s service in advance. I had been up to that point, getting my money’s worth. And then, just a few weeks ago… My Site Slowed to a Crawl That spike was from an April Fool's Day Post, I think Why? Well, when I first started blogging, I had the same problem that most beginner bloggers have – not many readers. In my first year of blogging, I think the highest number of readers on a single day was about 125. I remember that day as I was very excited to break 100! Bluehost was very reliable, serving up my content with maybe a total of 3-4 outages in the past 2 years. Support was usually very prompt with answers and solutions, and I love their ‘Chat now’ technology – much nicer than message boards only or pay-to-talk phone support. In the past 6 months however, I noticed a couple of things: daily traffic was increasing – woohoo! my service was experiencing severe CPU throttling – doh! To be honest, I wasn’t aware the throttling was occuring, but I did know that the response time of my blog was starting to lag. Average load times were approaching 20-30 seconds. Not good when good sites are loading in 5 seconds or less. And just this past week, in getting ready to launch a new website for work that sucked in an RSS feed from my blog, the new page was left waiting for more than a minute. Not good! In fact my boss asked, why aren’t you blogging on Blogger? Ugh. I tried a few things to fix the problem: I paid for a premium WordPress theme – Themify’s Grido (thanks to @SQLRockstar for the heads-up) I installed a couple of WP caching plugins I read every WP optimization blog post I could get my greedy little eyes on However, at the same time I was also getting addicted to WordPress bloggers talking about all the cool things you could do with your blog. As a result I had at one point about 30 different plugins installed. WordPress runs on MySQL, and certain queries running via these plugins were starving for CPU. Plugins that would be called every page load meant that as more people clicked on my site, the more CPU I needed. I’m not stupid, so I eventually figured out that maybe less plugins was better, and was able to go down to just 20. But still, the site was running like a dog. CPU Throttling, makes MySQL wait to run a query Bluehost runs shared servers. Your site runs on the same box that several hundred (or thousand?) other services are running on. If you take more CPU than they think you should have, they will limit your service by making you stand in line for CPU, AKA ‘throttling.’ This is not bad. This business model allows them to serve many, many users for a very fair price. It works great until, well, until it doesn’t. I noticed in the last week that for every minute of service, I was being throttled between 60 and 300 seconds. If there were 5 MySQL processes running, then every single one of them were being held in check. The blog visitor notice this as their page requests would take a minute or more to be answered. Bluehost unfortunately doesn’t offer dedicated server hosting, so there was no real upgrade path for me follow and remain one of their customers. So what was I to do? Uninstall every plugin and hope the site sped up? Ask for people to take turns on my blog? I decided to spend my way out of the problem. I signed up for service with WP Engine and moved ThatJeffSmith.com The first 2 months are free, and after that it’s about $29/month to run my site on their system. My math tells me that’s a good bit more expensive than what Bluehost was charging me – to the tune of about 300% more a month. Oh, and I should just say that my blog is a personal blog even though I talk about work stuff here. I don’t get paid for blogging, I don’t sell ads, and I don’t expense the service fees – this is my personal passion. So is it worth it? In the first 4 days, it seems to be totally worth it. Load times have gone from 20-30 seconds to less than 5 seconds. A few folks have told me via Twitter that they notice faster page loads. I anticipate this will indirectly lead to more traffic as Google penalizes you in search results if your site is too slow, and of course some folks won’t even bother waiting more than 5-10 seconds. I noticed right away that writing posts, uploading pictures, and just using the WordPress dashboard in general was much more responsive. So writing is less of a chore now, which means I won’t have a good reason not to write How I Moved to WP Engine I signed up for the service and registered my domain. I then took a full export of my ‘old’ site by doing a FTP GET of all my files, then did a MySQL database backup, exported my WordPress Theme settings to a .zip file, and then finally used the WordPress ‘Export’ feature. I then used the WordPress ‘Import’ on the new site to load up my posts. Then I uploaded the theme .zip package from Themify. Then I FTP’d the ‘wp-content’ directory up to my new server using SFTP (WP Engine only supports secure FTP – good on them!) Using a temporary URL to see my new site, I was able to confirm that everything looked mostly OK – I’ll detail the challenges and issues of fixing the content next – but then it was time to ‘flip the switch.’ I updated the IP address that the DNS lookup tables use to route traffic to my new server. In a matter of minutes the DNS servers around the world were updated and it was time to see the new site! But It Was ‘Broken’ I had never moved a website before, and in my rush to update the DNS, I had changed the records without really finding out what I was supposed to do first. After re-reading the directions provided by WP Engine and following the guidance of their support engineer, I realized I had needed to set the CNAME (Alias) ‘www’ record to point to a different URL than the ‘www.thatjeffsmith.com’ entry I had set. Once corrected the site was up and running in less than a minute. Then It Was Only Mostly Broken Many of my plugins weren’t working. Apparently just ftp’ing the wp-content directory up wasn’t the proper way to re-install the plugin. I suspect file permissions or file ownership wasn’t proper. Some plug-ins were working, many had their settings wiped to the defaults, and a few just didn’t work again. I had to delete the directory of the plug-in manually via SFTP, and then use the WP Dashboard to install it from scratch. And here was my first ‘lesson’ – don’t switch the DNS records until you’ve completely tested your new site. I wasn’t able to navigate the old WP console to review my plug-in settings. Thankfully I was able to use the Wayback Machine to reverse engineer some things, and of course most plug-ins aren’t that complicated to setup to begin with. An example of one that I had to redo from scratch is the ‘Twitter @Anywhere Plus’ plugin that I use to create the form that allows folks to tweet a post they enjoyed at the end of each story. How WP Engine ‘Hooked’ Me I actually signed up with another provider first. They ranked highly in Google searches and a few Tweeps recommended them to me. But hours after signing up and I still didn’t have sever reyady, I was ready to give up on them. They offered no chat or phone support – only mail and message boards. And the message boards were rife with posts about how the service had gone downhill in the past 6 months. To their credit, they did make it easy to cancel, although I did have to do so via email as their website ‘cancel’ button was non-existent. Within minutes of activating my WP Engine account I had received my welcome message and directions on how to get started. I was able to see my staged website right away. They also did something very cool before I even got started – they looked at my existing site and told me by how much they could improve its performance. The proof is in the web pudding. I like this for a few reasons, but primarily I liked their business model. It told me they knew what they were doing, and that they were willing to put their money where their mouth was. This was further evident by their 60-day money back guarantee. And if I understand it correctly, they don’t even take your money until after that 60 day period is over. After a day, I was welcomed by the WP Engine social media team, and was given the opportunity to subscribe to their newsletter and follow their account on Twitter. I noticed their Twitter team is sure to post regular WordPress tips several times a day. It’s not just an account that’s setup for the sake of having a Twitter presence. These little things add up and give me confidence in my decision to choose them as my hosting partner. ‘Partner’ – that’s a lot nicer word than just ‘service provider,’ isn’t it? Oh, and they offered me a t-shirt. Don’t ever doubt the power of a ‘free’ t-shirt! How awesome is this e-mail, from a customer perspective? I wasn’t really expecting any of this. Exceeding expectations before I have even handed over a single dollar seems like a pretty good business plan. This is how you treat customers. Love them to death, and they reward you with loyalty. But Jeff, You Skipped a Piece Here, Why WP Engine? I found them on one of those ‘Top 10′ list posts, and pulled up their webpage. I noticed they offered a specialized service – they host WordPress installs, and that’s it. Their servers are tuned specifically for running WordPress. They had in bolded text, things like ‘INSANELY FAST. INFINITELY SCALABLE.’ and ‘LIGHTNING SPEED.’ And then they offered insurance against hackers and they took care of automatic backups and restores. The only drawbacks I have noticed so far relate to plugins I used that have been ‘blacklisted.’ In order to guarantee that ‘lightning’ speed, they have banned the use of the CPU-suckiest plugins. One of those is the ‘Related Posts’ plugin. So if you are a subscriber and are reading this in your email, you’ll notice there’s no links back to my blog to continue reading other related stories. Since that referral traffic is very small single-digit for my site, I decided that I’m OK with that. I’d rather have the warp-speed page loads. Again, I think that will lead to higher traffic down the road. In 50+ days I will need to decide if WP Engine is a permanent solution. I’ll be sure to update this post when that time comes and let y’all know how it turns out.

    Read the article

  • Dreamweaver Delete Space to Word, Not Word

    - by Don
    There's a built in DW keyboard shortcut (Ctrl + Del) that deletes up to AND INCLUDING the first word to the right. I used to use the ColdFusion Studio app for coding and it would just remove the space UP TO the word (left the word or bracket, or whatever alone.) Any DW users know if this is a setting that can be changed? I'm really used to the old behavior and keep deleting the first word, hitting Ctrl + Z to put it back and then having to manually delete all the spaces to leave the word... Hoping one of you geniuses can help! Thanks, D.

    Read the article

  • Exchange Server is rejecting message after "MAIL FROM" with "500 5.3.3" with tarpit despite being a Trusted Receiver

    - by Don Rhummy
    I'm getting the message: "500 5.3.3 Unrecognized command" from Exchange server and seeing in the Exchange Server logs that it's tarpitting my smtp sender despite the fact that: I added a Receive Connector for my ip that allows connection, uses "Externally Secure" I ran the commands (with the actual server name): CODE: Set-ReceiveConnector "MyTrusted connector (Servername)" -MaxAcknowledgementDelay 0 Set-ReceiveConnector "MyTrusted connector (Servername)" -TarpitInterval 0 Despite all that, it STILL fails! Any idea what's wrong?

    Read the article

  • How to give a user NTFS rights to a folder, via Powershell

    - by Don
    I'm trying to build a script that will create a folder for a new user on our file server. Then take the inherited rights away from that folder and add specific rights back in. I have it successfully adding the folder (if i give it a static entry in the script), giving domain admin rights, removing inheritance, etc...but i'm having trouble getting it to use a variable I set as the user. I don't want there to be a static user each time, I want to be able to run this script, have it ask me for a username, it then goes out and creates the folder, then gives that same user full rights to that folder based on the username i've supplied it. I can use Smithd as a user, like this: New-Item \\fileserver\home$\Smithd –Type Directory But can't get it to reference the user like this: New-Item \\fileserver\home$\$username –Type Directory Here's what i have: Creating a new folder and setting NTFS permissions. $username = read-host -prompt "Enter User Name" New-Item \\\fileserver\home$\$username –Type Directory Get-Acl \\\fileserver\home$\$username $acl = Get-Acl \\\fileserver\home$\$username $acl.SetAccessRuleProtection($True, $False) $rule = New-Object System.Security.AccessControl.FileSystemAccessRule("Administrators","FullControl", "ContainerInherit, ObjectInherit", "None", "Allow") $acl.AddAccessRule($rule) $rule = New-Object System.Security.AccessControl.FileSystemAccessRule("Domain\Domain Admins","FullControl", "ContainerInherit, ObjectInherit", "None", "Allow") $acl.AddAccessRule($rule) $rule = New-Object System.Security.AccessControl.FileSystemAccessRule("Domain\"+$username,"FullControl", "ContainerInherit, ObjectInherit", "None", "Allow") $acl.AddAccessRule($rule) Set-Acl \\\fileserver\home$\$username $acl I've tried several ways to get it to work, but no luck. Any ideas or suggestions would be welcome, thanks.

    Read the article

  • Possible to get SSD TRIM (discard) working on ext4 + LVM + software RAID in Linux?

    - by Don MacAskill
    We use RAID1+0 with md on Linux (currently 2.6.37) to create an md device, then use LVM to provide volume management on top of the device, and then use ext4 as our filesystem on the LVM volume groups. With SSDs as the drives, we'd like to see the TRIM commands propagate through the layers (ext4 - LVM - md - SSD) to the devices. It looks like recent 2.6.3x kernels have had a lot of new SSD-related TRIM support added, including lots more coverage of Device Mapper scenarios, but we still can't seem to get it to cascade down properly. Is this possible yet? If so, how? If not, is any progress being made?

    Read the article

  • Possible to get SSD TRIM (discard) working on ext4 + LVM + software RAID in Linux?

    - by Don MacAskill
    We use RAID1+0 with md on Linux (currently 2.6.37) to create an md device, then use LVM to provide volume management on top of the device, and then use ext4 as our filesystem on the LVM volume groups. With SSDs as the drives, we'd like to see the TRIM commands propagate through the layers (ext4 - LVM - md - SSD) to the devices. It looks like recent 2.6.3x kernels have had a lot of new SSD-related TRIM support added, including lots more coverage of Device Mapper scenarios, but we still can't seem to get it to cascade down properly. Is this possible yet? If so, how? If not, is any progress being made?

    Read the article

  • What is some good lossless video codec for recording gameplay?

    - by Don Salva
    I'm an avid gamer and I like to record my gameplay. Usually I've been using Fraps to do it, however I'm thinking of switching to Dxtory as it allows to write on multiple HDDs at once. Say I have 3 HDDs with the following write speeds: HDD1 with 50 mb/s, HDD2 with 22 mb/s and HDD3 with 45 mb/s. Combined write speed would be: 117 mb/s. Dxtory allows you to utilize all 3 HDD's at once while recording your gameplay. Using this formula: RGB24 YUV24: Width x Height x 3 x fps = bitrate (byte/sec) YUV420: Width x Height x 3 / 2 x fps = bitrate (byte/sec) YUV410: Width x Height x 9 / 8 x fps = bitrate (byte/sec) And recording in YUV420 colorspace at 1920x1080 with 30 fps I'd need about 95 mb/s write speed. Dxtory is good because it allows me to play with constant 60 fps while recording in 30 fps. Fraps does not (even though they say it does), once you start recording with Fraps, the game's fps drops. So I'm looking for a codec that doesn't need a very high write speed (bitrate) yet records in good (lossless) quality. Dxtory comes with its own codec, the Dxtory codec. Which allows me some experimentation. Fraps has it's own codec which I can use in Dxtory to expirement around. I also came across http://lags.leetcode.net/codec.html . Are there more lossless codecs out there (besides Fraps' and Dxtory's) which are good for what I want to do? Edit: To clarify, yes, I'm aware a lossless codec always has "good" quality. But that's not what I'm looking for. Let me take the Fraps codec and Dxtory codec to clarify what I'm looking for. When I record with the Dxtory codec in RGB colorspace at 1920x1080 with targeted 30 fps, I can play the game at 60 fps, BUT I'm recording with 10-15 fps, that's because RGB with Dxtory needs much, much more write speed than my hdd can handle. When recording with Dxtory codec in YUV410 colorspace at 1920x1080 with targeted 30 fps, I can play at 60 fps and record at 30 fps, again, that's because YUV410 in Dxtory's codec takes much, much less write speed than RGB When recording with Fraps codec in ??? (I dunno the color space Fraps records in, I guess YUV420), I can play with 60 fps and record with 30 fps. What I'm looking for is a lossless codec that can record in YUV420 (or even RGB??) which does not exceed a write speed (or bitrate if you will) of 100 mb/s in 1920x1080 or in other words, which will allow me to record in constant 30fps. Obviously the best solution would be to buy an SDD, but that's not what I'm after.

    Read the article

  • Screen is greyed out after power failure shutdown: Mac OSX

    - by Don MacLachlan
    When the battery power is down and the unit not plugged in the computer is forced into a sleep mode requiring pushing the start button when power is re-connected. The initial desktop screen appears to be greyed out and is unresponsive with a timer bar which, when the timing sequence is complete restores an active desktop. I can't find any reference to this phenomenon in the OSX literature I have. Any pointers to where I can get more information? Perhaps I am using the wrong search criteria?

    Read the article

  • I want to install an MSI twice

    - by don.vince
    I have a peculiar wish to install an msi twice on a machine. The purpose of the double install is to first install under the pre-production folder, run the deployment in a safe environment prior to deploying in the production folder. We typically use separate machines to represent these different environments however in this case I need to use the same box. The two scenarios I get are as follows: I've installed pre-production, I'm happy, I want to install production, I run the msi, it asks whether I want to repair or remove the installation I've production installed, I want to install the new version of the msi, it tells me I already have a version of the product installed and I must first un-install the current version The first scenario isn't too bad as we can at that point sensibly un-install and re-install under the production folder, but the second scenario is a pain as we don't want to un-install the live production deployment. Is there a setting I can give to msiexec that will allow this? Is there a more suitable different approach I could use?

    Read the article

  • Determining a realistic measure of requests per second for a web server

    - by Don
    I'm setting up a nginx stack and optimizing the configuration before going live. Running ab to stress test the machine, I was disappointed to see things topping out at 150 requests per second with a significant number of requests taking 1 second to return. Oddly, the machine itself wasn't even breathing hard. I finally thought to ping the box and saw ping times around 100-125 ms. (The machine, to my surprise, is across the country). So, it seems like network latency is dominating my testing. Running the same tests from a machine on the same network as the server (ping times < 1ms) and I see 5000 requests per second, which is more in-line with what I expected from the machine. But this got me thinking: How do I determine and report a "realistic" measure of requests per second for a web server? You always see claims about performance, but shouldn't network latency be taken into consideration? Sure I can serve 5000 request per second to a machine next to the server, but not to a machine across the country. If I have a lot of slow connections, they will eventually impact my server's performance, right? Or am I thinking about this all wrong? Forgive me if this is network engineering 101 stuff. I'm a developer by trade. Update: Edited for clarity.

    Read the article

  • Homework with allocate subnet IP address

    - by Don Lun
    I'm having difficulty solving a subnet allocation homework problem. Assume that a university has an address block 128.205.224.0/19. It has to allocate addresses for 2 departments' networks, each of size 1800, and for 4 offices, of sizes 550, 600, 650, and 750 nodes respectively. Assuming that the university network allocates addresses sequentially from the beginning of the allocated allocated address space, what are the prefix allocations for these subnetworks? I first thought in this way: There should be 6 subnets in the network. So I need 3 bits for the subnets. So 3 + 19 = 22 bits should be the network bits. Then there are only 10 bits left. 2^10 = 1024 < 1800, so this cannot work. Could you guys give me a hint or some thoughts for solving this problem?

    Read the article

  • IIS URl Rewrite working inconsistently?

    - by Don Jones
    I'm having some oddness with the URL rewriting in IIS 7. Here's my Web.config (below). You'll see "imported rule 3," which grabs attempts to access /sitemap.xml and redirects them to /sitemap/index. That rule works great. Right below it is imported rule 4, which grabs attempts to access /wlwmanifest.xml and redirects them to /mwapi/wlwmanifest. That rule does NOT work. (BTW, I do know it's "rewriting" not "redirecting" - that's what I want). So... why would two identically-configured rules not work the same way? Order makes no different; Imported Rule 4 doesn't work even if it's in the first position. Thanks for any advice! EDIT: Let me represent the rules in .htaccess format so they don't get eaten :) RewriteEngine On # skip existing files and folders RewriteCond %{REQUEST_FILENAME} -s [OR] RewriteCond %{REQUEST_FILENAME} -l [OR] RewriteCond %{REQUEST_FILENAME} -d RewriteRule ^.*$ - [NC,L] # get special XML files RewriteRule ^(.*)sitemap.xml$ /sitemap/index [NC] RewriteRule ^(.*)wlwmanifest.xml$ /mwapi/index [NC] # send everything to index RewriteRule ^.*$ index.php [NC,L] The "sitemap" rewrite rule works fine; the 'wlwmanifest' rule returns a "not found." Weird.

    Read the article

  • Can I use dmraid instead of md (mdadm) to make software RAID-1 and RAID-1+0 volumes?

    - by Don MacAskill
    On a related question about SSDs and TRIM (see: Possible to get SSD TRIM (discard) working on ext4 + LVM + software RAID in Linux? ), it turns out that dmraid may now (or shortly) support TRIM on RAID-1. Typically, we've used md (via mdadm) to create our RAID-1 volumes, then used LVM to create volume groups, then formatted with the file system of our choice (ext4 lately). We've been doing this for years, and Google & ServerFault searches seem to confirm this is the most common way of doing software RAID with volume management. Google searches seem to suggest that dmraid is use for so-called 'fakeRAID' configurations where there's some level of hardware 'help' in the form of RAID BIOS in the controller, which we don't have (and don't want to use - we'd like a fully software solution). Since we'd like to use TRIM on our SSDs, and since md doesn't seem to (yet?) support TRIM, I'm wondering if it's possible to use dmraid instead of md to create RAID-1 (and RAID-1+0) volumes in software, with no hardware support (ie, just plugged into a dumb SATA/SAS bus)?

    Read the article

  • command prompt DIR with wildcard returns unexpected results

    - by Don Dickinson
    I am running 2003 server (latest service pack). When i type this on the command line: dir 2010* or dir 2010*.* i receive this as the result: 02/01/2011 02:34 PM 2,460 2011-02-01-14-34-23-807.mdn 02/02/2011 08:59 AM 3,757 2011-02-02-08-59-32-604.req 02/01/2011 09:16 AM 235 2011-02-01-09-16-35-104.dat 02/02/2011 05:06 PM 460 2011-02-02-17-06-05-166.log 02/01/2011 03:31 PM 66,570 2011-02-01-15-31-27-838.dat 02/01/2011 03:16 PM 145 2011-02-01-15-16-51-135.log 02/01/2011 08:52 PM 1,608,916 2011-02-01-20-52-57-416.req 7 File(s) 1,682,543 bytes 0 Dir(s) 42,891,452,416 bytes free can anyone tell me why? i was expecting to see a list of only files that begin with "2010". there are no such files in the directory, so i wasn't expecting to see anything. i must either misunderstand how DIR handles wildcards or i'm doing something stupid.

    Read the article

  • How do I keep multiple copies of Outlook in sync when using RPC over HTTP?

    - by Don
    I use Outlook 2007 at work with our Exchange 2003 server. I just setup my home system with Outlook 2007 so that I could use the RPC over HTTP to access Exchange without having to use a VPN. It works fine. I can get mail, send mail, etc. What it doesn't seem to be doing is staying in sync. For example, I read a few messages at home, moved them into different folders from the Inbox, etc. That all seemed fine. When I login to my work machine and look at the copy of Outlook there, the mail is still unread and nothing has been moved. Am I missing something simple here? I would have to assume that my home machine should be telling Exchange where these messages belong and that they've been read. Both machines are running Windows 7, if that matters. Ideas?

    Read the article

  • How long does badblocks take on a 1TB drive?

    - by Steven Don
    I'm running badblocks (or rather "e2fsck -c") on a 1TB drive and if the progress indicator is any indication (no pun intended), it's going to take almost forever to complete. Right now it says 0.01% done, 30:20 elapsed which would mean the thing would take 17 weeks or so to complete, which seems rather excessive in my book. Is that a normal amount of time for such a check to take or it simply that my suspicions are correct in that the drive is failing, thus causing the check to take only slightly shorter than eternity? I found this question here, but that pertains to the amount of passes done.

    Read the article

  • RD Gateway reporting features/capabilities

    - by Don
    We have just implemented RD Gateway for our own department in preparation for a push to the whole agency for telecommuting. It is all setup and working great, but I was trying to figure out how best to go about monitoring/reporting of users. I see third party software out there that will do it, but is there anything built-in or via powershell/scripting that I could use that would give me a report of the daily activity of users? Something to say, "User A connected at this time, was on for this long, sent/received this much data"? Basically some of the same stuff you can see in event viewer. Ideally I'd like to be able to have this setup so that once a day it emails me with the daily usage for when a supervisor asks about if their person is actually working (or at least online sending and receiving x amount of data), I'll have some metrics to give them. I realize that actual work output is relevant and more of a managerial issue, but I would like to be able to offer as much as I can from my end when asked. Thoughts? Thanks!

    Read the article

  • How to import a text file into powershell and email it, formatted as HTML

    - by Don
    I'm trying to get a list of all Exchange accounts, format them in descending order from largest mailbox and put that data into an email in HTML format to email to myself. So far I can get the data, push it to a text file as well as create an email and send to myself. I just can't seem to get it all put together. I've been trying to use ConvertTo-Html but it just seems to return data via email like "pageFooterEntry" and "Microsoft.PowerShell.Commands.Internal.Format.AutosizeInfo" versus the actual data. I can get it to send me the right data if i don't tell it to ConvertTo-Html, just have it pipe the data to a text file and pull from it, but it's all ran together with no formatting. I don't need to save the file, i'd just like to run the command, get the data, put it in HTML and mail it to myself. Here's what I have currently: #Connects to Database and returns information on all users, organized by Total Item Size, User $body = Get-MailboxStatistics -database "Mailbox Database 0846468905" | where {$_.ObjectClass -eq “Mailbox”} | Sort-Object TotalItemSize -Descending | ft @{label=”User”;expression={$_.DisplayName}},@{label=”Total Size (MB)”;expression={$_.TotalItemSize.Value.ToMB()}} -auto | ConvertTo-Html #Pause for 5 seconds for Exchange write-host -foregroundcolor Green "Pausing for 5 seconds for Exchange" Start-Sleep -s 5 $toemail = "[email protected]" # Emails report to this address. $fromemail = "[email protected]" #Emails from this address. $server = "Exchange.company.com" #Exchange server - SMTP. #Email the report. $email = New-Object System.Net.Mail.MailMessage $email.IsBodyHtml = $True $email.To.Add($toemail) $email.From = $fromemail $email.Subject = "Exchange Mailbox Sizes" $email.Body = $body $client = New-Object System.Net.Mail.SmtpClient $server $client.UseDefaultCredentials = $true $client.Send($email) Any thoughts would be helpful, thanks!

    Read the article

  • When can an FTP server close its passive connections?

    - by Don Kirkby
    Does the FTP protocol allow the server to close any of its passive connections while the client is still connected? Can it tell when the client is finished receiving and then close the connection? I'm including an FTP server in my application using the pyftpdlib Python project. I've got it to work in active and passive mode, but I'm a bit concerned about when it closes its passive connections. I've tried connecting to it with both FileZilla and the default ftp command in Ubuntu, and in both cases, I get a new passive port for every request. That is, if I sit in the root folder and type ls 10 times, I use up 10 ports. This means that I have to allocate a big block of passive ports for the FTP server to use so it won't run out. As soon as the client disconnects, the server releases all the passive connections associated with that client and those ports can be reused. However, a long-running connection could use up a lot of ports.

    Read the article

  • Untar with date filter

    - by Don
    Is there any way to untar and only extract those files that are above a certain date including directory structure?? I restored a backup on a play server but it was a few days old. However I have a tar archive of the entire structure that is more up to date and healthy so now I want to extract all files (including directory structure) based on a date filter on the files if possible?

    Read the article

< Previous Page | 8 9 10 11 12 13 14 15 16 17 18 19  | Next Page >