Search Results

Search found 428 results on 18 pages for 'thinkpad'.

Page 12/18 | < Previous Page | 8 9 10 11 12 13 14 15 16 17 18  | Next Page >

• Garbled display after Ubuntu upgrade to 2.6.32-2* kernel

  - by Matthias

  I was running Ubuntu 9 (Karmic Koala) with no problems. I recently upgraded to Ubuntu 10 (Lucid Lynx) and cannot use it normally. After I log in, the screen scrambles (a purple/green mess)--impossible to see anything, although I can get out by marking the spot on the screen to click for a restart, so Linux is working behind the scenes. If I start in recovery mode with basic graphics, I have no problems at all (other than limited functionality). If I start the old 2.6.31-22 kernel, I see a bunch of "unmountable" errors in the startup script, but I can use Linux normally with no apparent problems. I'm running an IBM ThinkPad A30 with ATI Mobility graphics. Just to reiterate, the screen looks normal until I log in, at which point it goes bonkers. What do I need to change in order to fix this?

  Read the article

• To mount NAS on a Laptop?

  - by deckoff

  So, I bought a NAS, which I configured successfully in /etc/fstab, on mu Kubuntu 10.10 Thinkpad x40. It works just fine when I am at home. A few days I went out with my laptop and the problem is, that when not at home, both suspend and hibernate functions seem forever to work. I commented out the entry on fstab and the laptop started to work as expected. I played with autofs, but it seems just dies at one moment and I cannot access anything. It works for some time, and then just goes off. Is there any consistent way, to make my laptop access the drive when at home and work OK when away? Probably a script that runs at startup, checks if the mount is there and mounts it if available... or a script that umount the drive at suspend|hibernate and loads it back at startup. Any useful ideas?

  Read the article

• Wireless/Bluetooth problems on t43p

  - by user75965

  I have been struggling to get my wireless mini pcmcia card recognised by 12.04. It suddenly stopped, mid session. I have taken it out and replaced with a couple of spares with slightly different serial numbers. One had no joy - 'unauathorised'. The other worked briefly for thunderbird but not firefox, it seemed. The network controller reads like this: 0b:02.0 Network controller: Intel Corporation PRO/Wireless 2200BG [Calexico2] Network Connection (rev 05) I have ordered a replacement from ebay, and hope I got the right one - used the the FRU number from the one that stopped working. But I have ALWAYS had no joy with my Thinkpad t43p Bluetooth and Ubuntu ( 12.04, and even 11.04 and 11.10, if I remember rightly). Do you think the Bluetooth problem will solve with a new mini pcmcia? Surely not, as it has never worked, whereas Wireless worked until a couple of weeks ago...

  Read the article

• xrandr shows VGA1 as disconnected

  - by Felix

  I have a Thinkpad W520 with Nvidia Optimus graphics. I have disabled the Nvidia card in BIOS (by selecting "integrated graphics"), so I'm running only on the integrated Intel graphics. I get full 3D acceleration, which would suggest the drivers are properly installed. However, I'm not able to use an external monitor. With the external monitor connected and turned on, running xrandr always gives: $ xrandr Screen 0: minimum 320 x 200, current 1920 x 1080, maximum 8192 x 8192 LVDS1 connected 1920x1080+0+0 (normal left inverted right x axis y axis) 344mm x 193mm 1920x1080 60.0*+ 59.9 50.0 1680x1050 60.0 59.9 1600x1024 60.2 1400x1050 60.0 1280x1024 60.0 1440x900 59.9 1280x960 60.0 1360x768 59.8 60.0 1152x864 60.0 1024x768 60.0 800x600 60.3 56.2 640x480 59.9 VGA1 disconnected (normal left inverted right x axis y axis) What gives? It sees the VGA1 port (to which the external display is connected), but it appears disconnected. I have tried forcing a resolution as per these instructions, but when I do that X becomes unresponsive and I have to Ctrl-Alt-F1 and restart it.

  Read the article

• Newly compiled (patched with -ck) 3.3 kernel won't boot up

  - by Shiki

  Screen is garbled. Reaaaally garbled. Like some sort of scrambling image from a movie. I can upload some pictures if needed. To be short with the description. Here is my 3.3 + ck .config file: http://pastebin.com/aP2F9RcH The dmesg log of the failed kernel: http://pastebin.com/esc2Rtka The computer is a ThinkPad T500 laptop. I have selected everything needed for the computer (as far as I can tell, but check the .config). The normal generic Ubuntu kernel boots and works perfect!

  Read the article

• How to permanently disable touchpad in 12.04?

  - by Andreas

  I'm looking for a way to permanently disable the touchpad in Ubuntu 12.04 (my computer is a Lenovo Thinkpad Edge on which it isn't possible to disable it in the BIOS). I tried the applications GPointingDeviceSettings and synaptiks 0.8.1 as well as the applets touchpad-indicator and Jupiter. None of these does the trick of disabling the touchpad permanently. Jupiter comes closest - it remembers that I have disabled the touchpad after restart - but when I login after the computer has been in suspend mode, the touchpad is enabled again. Can anyone help me in disabling the touchpad possibly at a lower level so it won't in any way be enabled unless I choose to enable it? I'm totally new to linux so a detailed explanation would be much appreciated ... The links, so far, doesn't address my question. I have no problem turning the touchpad off and making it stay off after reboot but when I login after the computer has been in an altered power mode it's on again. Isn't there a way to permanently disable a device like touchpad?

  Read the article

• How do I enable the GRUB splash screen in Xubuntu 12.10?

  - by user132060

  I have Xubuntu 12.10 running fine on a Thinkpad T60. Grub2 is installed as the boot manager and the GRUB....LINUX_DEFAULT is set as "quiet splash". Therefore, Grub should display its splash image until plymouth takes over, as I understand it. Unfortunately, it does not. If I hold down shift to get into the boot menu, my splash image shows up, but the screen remains black. I realise it's a minor cosmetic issue, but I have found no way to fix it.

  Read the article

• Can't connect to wireless network in Lubuntu

  - by mike

  I have a CISCO 802.11b WIFI Mini PCI LAN card in my IBM ThinkPad T30 laptop. Is this wireless card compatible with Lubuntu? I ran it off a Live CD and it showed the network I want to connect to – but it just won't connect. I tried installing Lubuntu and during installation it also tried to connect to the same network and still nothing. I know that the wireless network is working correctly because I can connect to it with all my other devices and it works on this very same laptop when I am running Windows.

  Read the article

• making "xwacom set" changes permanent

  - by Philippe

  On my Thinkpad X220 Tablet the touch-finger works flawlessly but the pen is terribly miscalibrated. The calibration tool in System settings - Wacom tablet does not work. Instead, whenever I wan't to use the pen I first need to sudo xsetwacom set 'Wacom ISDv4 E6 Pen stylus' Area 0 0 27760 15690 These changes do not remain permanent. That is, after every reboot they are gone. How can I make the change permanent - I'm not looking for a startup scrip, I'd like to set the right area once for all. Any idea?

  Read the article

• Gnome/X logs off immediately after login -- which logfiles are relevant?

  - by joebuntu

  I've been tinkering with fingerprint-gui as well as X/xrandr resolution settings. When I start my machine, it boots up normally. As soon as X and gnome have finished starting, it logs me off automatically and brings me back to the gdm login prompt with the user list. Then I am, however, able to log in using "Ubuntu Desktop Fail-safe". I've checked the list of start-up applications, but everything seems fine there. I can't yet put my finger on what exactly might be responsible for this: X, gnome or some messed up pam.d settings. So far I've checked /var/logs/X11/xorg.0.log, /var/logs/auth.log and ~/.xsession-errors. In addition, I don't quite seem to understand the "interplay" between X, GDM, GNOME, GNOME-policykit, PAM.d and all that. Are there any other relevant log files that could point me to what's broken? Specs: Ubuntu 10.10 Maverick Meerkat IBM/Lenovo Thinkpad R60, ATI Radeon x1400 Mobility all updates installed Linux User 1 year+,

  Read the article

• Paraview 3.98.1 takes too long to launch

  - by Alejo

  I have been used Ubuntu 12.10 with paraview 3.14.1 to run and visualise CFD simulations (OpenFoam and Eilmer3) and the experience has been really good up to date. When I wanted to try Ubuntu 13.01, I realised paraview 3.98.1 was the version to be installed in this distribution when running sudo apt-get install paraview. I noticed it takes way too long to launch, not to mention that paraFoam always produces an error so paraFoam -bulitin has to be used instead. Does anyone know the reason why paraview 3.98.1 takes so long to load?, is it because the new version has more feautures or Ubuntu 13.04 simply can't handle it smoother? My machine is a Thinkpad W530 with 16GB RAM 1600MHz and intel i7-3720QM. I am running Ubuntu under VMware player set-up with 4GB RAM, 2 cores and Automatic vitualization. Thanks.

  Read the article

• Installed thinkfan, should I keep it?

  - by FRC

  Well I did fixed my overheating problem on my Lenovo T500 with Ubuntu 12.04 LTS. At the same time I did install Thinkfan. But since I have a solution for overheating now, I would like to know if there is any really good reason to keep it? My fan speed without it was cca 3000 RPM. When it installed droped to 2500RPM in idle time. Thinkpad have very quiet fans, so I don't really hear the noise when is on 3000RPM (no difference between 2000 or 3000 RPM). Is it better for processor to have more air or more air brings just more dust? Silly question but I would REALLY want to know the reason of keeping thinkfan.

  Read the article

• What is the reason for high power consumption in 12.04?

  - by tom

  I haven't seen this exact question posted or any related answers, so I'm re-posting. Here is the problem: After upgrading to Ubuntu 12.04 Precise Pangolin, my t420s laptop idles above 20 watts (right now with only Chrome running, I'm using 25.4 W) I had a similar problem with Ubuntu 11.10, but after much tweaking the power consumption came down < 10 W on idle. The primary culprit to the 11.10 problem was supposedly fixed by default in 12.04. So my question is, what is happening now? Computer: Lenovo Thinkpad t420s, with Intel i5-2520M @2.5 Ghz - 2x 4gb ram - disk 0 HITACHI 320 Gb - disk 1 SATA SSD 128 Gb

  Read the article

• What command are my volume keys running?

  - by user2787904

  In Unity I use my ThinkPad hot keys to change the volume. I need to know the command that these keys run so that I can bind it in my window manager. I have tried using amixer but could not change the volume through command line amixer set Master 10%- amixer: Unable to find simple control 'Master',0 amixer scontrols: Simple mixer control 'IEC958',0 amixer set 'IEC958' 50%- amixer: Invalid command! So obviously this is not what Unity is running. I have tried changing the default sound card as well but that didn't help.

  Read the article

• Trouble installing 12.04 from cd, blank screen with cursor

  - by Master Morality

  I should preface this with saying that this is not my first rodeo. I started playing with Linux in 1999 (Red Hat) and I'm currently typing this on a ThinkPad running 12.04... When I put in the live cd, I boots, and I can get to the option menu to decide whether to install/run etc, but at any point beyond that I get only a single caret. I can type stuff in, but it goes no where. I've tried the usual stuff like running with nomodeset (thinking it was the intel HD400 graphics, but it is integrated graphics...) here is the setup: ASUS p8z77 pro (with the Atheros AR9485 wifi supposedly, but I'm not that far yet) i7 3370k 8gig X 2 G.Skill Crucial M4 (256 gig) LG Super-multi DVD re-writer no video card UPDATE: I though may be it was a bad image on the CD, so I downloaded another iso, and used a USB disk. now it boots to a blank screen. I can see the "press any key to get options" screen, but after that, it just goes to a blank screen.

  Read the article

• Compiz using 40% CPU on Ubuntu 13.10

  - by Olli

  After upgrading to 13.10, compiz process has started taking up to 40% of CPU resources. In addition, Unity is sluggish just like in this recent question Compiz at 30% of CPU on Thinkpad T420. My PC is HP Compaq NX6310 and Compiz version is 0.9.10.2. First I had error message during boot, but did find solution for that (Bug #1014289) by updating the kernel to newer 3.11.4, it did not change the CPU usage. For the CPU problem I tried solution for Bug #1221837 by adding the line MESA_GL_VERSION_OVERRIDE=1.4 in the file /etc/environment - that did not help me, so my problem seems not to be the same bug. Any suggestions on how to resolve this issue?

  Read the article

• Gnome/X logs off immediately after login -- which logfiles are relevant?

  - by joebuntu

  I've been tinkering with fingerprint-gui as well as X/xrandr resolution settings. When I start my machine, it boots up normally. As soon as X and gnome have finished starting, it logs me off automatically and brings me back to the gdm login prompt with the user list. Then I am, however, able to log in using "Ubuntu Desktop Fail-safe". I've checked the list of start-up applications, but everything seems fine there. I can't yet put my finger on what exactly might be responsible for this: X, gnome or some messed up pam.d settings. So far I've checked /var/logs/X11/xorg.0.log, /var/logs/auth.log and ~/.xsession-errors. In addition, I don't quite seem to understand the "interplay" between X, GDM, GNOME, GNOME-policykit, PAM.d and all that. Are there any other relevant log files that could point me to what's broken? Specs: Ubuntu 10.10 Maverick Meerkat IBM/Lenovo Thinkpad R60, ATI Radeon x1400 Mobility all updates installed Linux User 1 year+,

  Read the article

• Suggestions to Purchase a System76 Ubuntu Pre-Installed Laptop

  - by user2956795

  I am looking to buy a new laptop that well supports Ubuntu, and recently came across the Ubuntu laptop manufactured by System76. I am not familiar with this brand although it seems to me they produce Ubuntu laptop with good performance. The price listed on their website is also not that expensive as compared with a MacBook Pro, or ThinkPad T series, or the Dell XPS Developer Edition Has anyone used System76 Ubuntu Laptop? I'd like to ask for your opinions. How is the experience. Is it worth to put the money on?

  Read the article

• Resolution problems

  - by tampe125

  i'm having some troubles with screen resolution. First of all, i'm using a Lenovo Thinkpad E520, with BackTrack 5 R2 installed. As far as I know, BT is based on Ubuntu 3.2, so I hope this is the right place to ask for help. My natural resolution is 1366x768, but I'm stuck with 1024x768. This is my hardware: lspci | grep VGA 00:02.0 VGA compatible controller: Interl Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) How can I fix that? Is there a ready-to-use driver or I have to compile that from source? At least, is there a solution, at all? :(

  Read the article

• Compiz features stopped working when an external monitor is attached

  - by adjfac

  Running 12.04 on a thinkpad T520 with nVidia NVIDIA Quadro NVS 4200M graphics. Just updated to the lasted nvidia 310 driver. Everything works great. However, as soon as I attached an external monitor using nvidia twinview, compiz features such as scale (moves all the active windows in one page) stopped working, as well as alt-tab to list all opened programs. Any ideas how i can fix this? never had this problem with 11.04. I can post my xorg.conf if that's of use to you. Thanks much! edit 1: I am using gnome3 classic edit 2: alt-tab works -- compiz application switcher (by default for gnome3 / unity) will crash gnome-classic, by changing to "static application switcher" in compiz seemed to solve the problem, but the scale still does not work when an external monitor is attached.

  Read the article

• Can my computer run Ubuntu? [duplicate]

  - by Harry B

  This question already has an answer here: How do I find out which version and derivative of Ubuntu is right for my hardware in terms of minimal system requirements? 2 answers Just want to check if my computer can run Ubuntu. It is an old IBM ThinkPad, so here are the basic stats I could find: IBM 28832ZU Processor Intel(R) Celeron(R) M processor 1300MHz Processor Speed 1.27 GHz Memory (RAM) 2048 MB Operating System Microsoft Windows XP Professional Operating System Version 5.1.2600 Intel Extreme Graphics 2M And here is some info pulled from the graphics panel NTEL(R) EXTREME GRAPHICS 2 FOR MOBILE REPORT Report Date: 06/28/2013 Report Time[hr:mm:ss]: 17:53:20 Driver Version: 6.14.10.3943 Operating System: Windows NT* 5.1.2600 Service Pack 2 Default Language: English DirectX* Version: 9.0 Physical Memory: 2038 MB Min. Graphics Memory: 8 MB Max. Graphics Memory: 64 MB Graphics Memory in use: 7 MB Processor: x86 family 6 Model 9 Stepping 5 Processor Speed: 1296 MHZ Device Revision: 2 Output Devices Connected to Graphics Accelerator * Active Notebook Displays:1

  Read the article

• Installing Ubuntu before or after upgrading from Vista to Win 7?

  - by amh

  I just got a new SSD hard drive for my thinkpad laptop. I just installed Vista with the factory CDs. On my old OS, my main OS was Ubuntu but I do want to keep Windows on a separate partition as a dual booth system. I definitely want to upgrade to Win 7 though and I will get it in a few days. My question is: should I install Ubuntu now and then upgrade to Win 7 in a few days? or is that going to mess up with the grub (or something else)? If that is the case, then I'd rather wait to install Ubuntu until after I upgrade to Vista. P.S. I know that probably any kind of mess done by the Win upgrade could be fixed, but I just want to avoid wasting time.

  Read the article

• Secondary display showing Ubuntu logo, but is not detected

  - by user72873

  I recently installed Ubuntu using WUBI, and it worked perfectly. However, my laptop is showing the main desktop screen, and my secondary display is only showing the Ubuntu logo with its loading bar underneath, nothing more. When I go to 'displays' it is only detecting my laptop screen, and not my Asus monitor (connected with a vga). Things I've done so far: Unplug and replug vga cable. Reboot computer. Re-install Ubuntu. Checked to see if any drivers needed to be installed. None were needed. I have a Thinkpad W520, with a Nvidia Quadro 1000M Thanks for the help!

  Read the article

• Cannot connect to wifi after downloading 12.04, repeated prompts for password

  - by Daytown3487

  I have had this OS for a little bit but this is my first upgrade and my first issue I am trying to deal with without my buddy who got my on Ubuntu in the first place (who is on the other side of the country.) I am running an IBM Lenovo T400 Thinkpad that had 11.10 on it and worked flawless. I upgraded to 12.04 a few weeks back and I have not been able to connect to the wifi in my home or anywhere for that matter. I have been trying to mess with it through reading the forums and am not quite sure what my problem is. I am running off of Fios Internet and the wifi keep disconnecting and prompts me to retype the password for reconnecting. If you guys could give me a step by step process of how I should go about fixing this I would GREATLY appreciate it!

  Read the article

• Menu bar and launcher missing in new installation of ubuntu 13.04

  - by Assimiz

  I have just installed ubuntu 13.04 on my ThinkPad laptop. I am missing the launcher and upper bar. I only found references to the same problem for upgrades, so I tried everything written here, here and here with no success. However, referring to the second link, I ran ccsm and found my Ubuntu Unity Plugin unchecked. Checking it required to also enable the OpenGL and so I did. But, apparently I am unable to enable the OpenGL. Trying to enable it manually...and the checkbox gets automatically unchecked after few seconds. Please help. Update: I have Intel graphics driver, maybe the problem is specifically with it?. I also tried running ccsm after logging using CTRL+ALT+F1 like given here. I was able to enable OpenGL and the Ubuntu Unity Plugin there, but still, no effect on my display, also after reboot.

  Read the article

< Previous Page | 8 9 10 11 12 13 14 15 16 17 18  | Next Page >