Search Results

Search found 4679 results on 188 pages for 'oem computers'.

Page 120/188 | < Previous Page | 116 117 118 119 120 121 122 123 124 125 126 127  | Next Page >

• OpenSCAD keeps crashing when I raise my precision past $fn=29?

  - by Jeremy Quick

  Out of the blue, OpenSCAD decided to stop working for me on designs that previously rendered just fine. After playing around I found out that any time I use a precision greater than $fn=29 the program crashes with the message "openscad.exe has stopped working". I can use any precision 29 and below, but the second I adjust it to even 30 the program crashes. This is a major problem as before I was using a precision of 100, and without it the design's moving parts do not work on print. I have uninstalled and reinstalled the program several times and haven't been able to fix the problem. I have watched the CPU during the calculations and it never reaches more than 35%. Does anyone have any suggestions as to how to fix this problem? I also have not changed computers or even the code. Thanks! I am using Windows 32 bit, Version 2013.06. The default version from the website.

  Read the article

• unusual webpage access problem

  - by user28163

  This is one of the weirdest problems I've ever seen and I'm out of ideas. I cannot access a couple of websites from my home pc (for 3-4 days now), or at least they go really really slow ~700b/s I can access these same websites fine from my laptop from same IP address. - The websites originate from different countries and are huge popular sites. - I have tried both my PC's network cards. - I have reformatted my PC. - I have reset my router to factory settings. - I have created virtual computers on my PC, and from inside those I cannot access the webpages. - I have flushed my dns. - I tried specifying my dns server addresses to 8.8.8.8 and 8.8.4.4. I can only access the webpages using my PC, if I first connect to an outside VPN. Again, these sites work fine on the 2 other pcs in this house (same ISP and internet connection). help plz :)

  Read the article

• Port forwarding not working?

  - by rphello101

  I'm trying to set up an Apache Server to be accessed publicly. I'm using a Netgear R4500 router hooked up to a Motorola SB6121 modem. I can access my server on my computer by typing in my IP address. After following the instructions to forward port 80 so I can access the server from other computers, it does not work (see image). I get "This webpage is not available". I am forwarding to the IP address of my computer. Using this Network Port Scanner Tool, it says "80/tcp filtered http", which, as I understand it, means forwarding did not work correctly. In my Apache httpd file, I have: ServerName 192.168.1.13:80 and Listen 192.168.1.13:80 Anyone know what's wrong or have something I can try? click to enlarge

  Read the article

• Changing LDAP schema casts Confluence AD integration unoperable

  - by Maxim V. Pavlov

  I have had our instance of Atlassian Confluence configured to be integrated with our Active Directory. In AD, all the users were being created under default Users folder in Active Directory Users and Computers. We have decided to introduce cleaner separation and have created an Organizational Units structure in AD. Under root we have created Managed OU, and under it - Users OU and all user accounts were moved under Users OU. Now I though that to let the Confluence AD integration engine "know" where to look for user accounts now, I only need to adjust the BaseDN and prepand it with ou=Managed so it is aware that it is looking for cn=Users but under ou=Managed. That didn't work. How should I adjust LDAP schema root in a client application for it to be able to look for users in OU that then in a default folder.

  Read the article

• Why does MTP work on one machine, but not another?

  - by bobmcn

  I have two Dell computers, a laptop and a desktop. I reinstalled Windows XP home on both, from the same CD. Then I installed Service pack 3 and ran windows update. When I connect my Creative Zen media player to the desktop, the MTP software that is part of XP recognizes it, and I can copy file to and from it using Windows Explorer. But when I connect the same player with the same cable to the laptop, I can see it in Windows Explorer, but none of the folders that are visible via the desktop are available, and I can't copy anything to or from it. How can I get this working on the laptop?

  Read the article

• Strange noise from my laptop when it is closed

  - by gotqn

  I am fan of powerfull PCs with huge wide screen monitors but I have bought an laptop as gift to my parents. This is the description: "second-handed" lenovo (and there is a sign "ThinkPad" Intel Core Duo CPU T6570 2.10 GHz 64 bits Windows 7 Ultimate and the issue is that when the laptop is turn on and then closed, after a interval of time (I am not sure how much exactly but I believe it is several hours) a strange noise come from the laptop. The noise is something like a "start-up" noise of old computers. I first thought this is some hardware issue but everything seems to work fine. Has anyone an idea what can cause this type of noise or a what can I do in order to track the problem down? I am not sure if this is a important thing, but the laptop is always connected to the power. Note: I have just noticed that the sound is generated again when the laptop is closed and then opened. Note: This is link to the audio - http://yourlisten.com/channel/content/16934332/WindowsStrangeNoise

  Read the article

• TeamViewer: How to disable color dithering for low-bit-depth screen settings

  - by gogowitsch

  I am using Terminal Services and TeamViewer a lot to access other computers, partly over slow networks. The problem described below is not affected by which of the two remote access services I am using. When accessing Windows 7 Professional machines, a great deal of text is hard to read as the background is dithered. Even for exactly the same colors, Windows 2003 does not seem to dither at all, but to choose the closest available color. I strongly prefer the latter, as I don't care for the exact colors, I just want to be able to read easily. I am not sure whether this is operating system-related. The programs on the remote systems do not allow me to change the color choices for the various backgrounds to anything sane. Is there a way to disable this color dithering using some target operating system setting that will do the trick for both Terminal Services and TeamViewer?

  Read the article

• Cannot access any remote resource after connecting to Cisco VPN on Vista

  - by Deepak Singh Rawat

  I have installed Cisco vpn client version 5.0.07.0290 on Vista Business SP2. I am able to successfully connnect to the vpn. But after connecting I am not able to access any resource in the vpn (like database, other computers in the network etc.). I have tried the following without any success : Older versions of the client Other vpn clients like Shrewsoft : same issue as the cisco vpn client Disabled Internet Connection Sharing service Installed the client in the root administrator account Run the installer as administrator Run the vpngui and ipsecdialer in XP compatibility mode and as administrator I am not sure how to troubleshoot this issue. Can somebody please help me in troubleshooting this issue? P.S : I've Zonealarm firewall, can that be an issue?

  Read the article

• how to separate a network for traffic

  - by Student_CVO

  At the moment our all computers in one big LAN, it is the intention to separate the admin and edu (it's in a school) especially for traffic and less for security. How do this best? I have a drawing, but can't post it (a can send it in a mail) Firewall?, VLAN?, IPCop (no two green zones)?, pfsense? ... Should there be two scopes on the dhcp server (WIN 2008 R2), one for admin and one for edu or is one scope enough? I would like your advice, I am a student in training with this task as a project. Thanks

  Read the article

• What Commands Does Windows Startup Repair Run?

  - by user138284

  Background: I created a wim image that we are planning to deploy to some of our computers, but when I image a computer with it from a flash drive it continually reports that the BOOTMGR is missing (and no, it's not booting off the flash drive). I am able to resolve this by running Windows Startup Repair, but I would rather just add whatever command is resolving the issue to a script that runs after the image. I have already tried running fixmbr, fixboot, rebuildbcd, and nt60, but none of those resolve the issue. Basically, I would like to know what exactly is being done when I run Windows Startup Repair.

  Read the article

• Thunderbird: Synchronize tags

  - by fuenfundachtzig

  When I check my mail (via IMAP) on my laptop I'd like to see the same tags that I set when I checked my mail on my office computer. So the question is: Is it possible to synchronize user-specified mail tags between Thunderbird running on different computers? I've read that tags could be stored via IMAP on the server, so maybe it's just that the server of my mail provider does not support this IMAP feature? (Whichever it is...) Has anybody any experience with this? Related, but not my primary concern: Will there ever be a more flexible tagging system in Thunderbird which allows for an easier definition of new tags? (I.e. that a don't have to define new tags in the preferences menu, but can just type them in when reading a mail?)

  Read the article

• Permissionless external drive with NTFS

  - by user12889

  I have an external hard disk which has 1 partition, formatted in NTFS. I use this drive on multiple computers with a different logins on different machines, Windows XP and Windows 7. All files are plain old files, not OS encrypted or compressed. Every now and then Windows 7 does not let me access some files, citing permission problems. I can circumvent this per case by taking ownership and setting appropriate permissions. This, however, is tedious. Is there a simple way to tell Windows to not enforce or store any permissions on any file/directory on a partition?

  Read the article

• Outlook displaying sender incorrectly

  - by Devnull

  In one user mailbox anything sent from any distribution list in our domain shows up as being from 'System Administrator'. It only happens when they are viewing the inbox using outlook (OWA is not affected), and its persisted across computers (though it did not happen immediately). When other users view the inbox from their outlook install (ie open users folder), everything appears as normal. Other folders are not affected. if a message is moved into a subfolder, the sender displays properly. Because of the persistence, and it only affecting one user, I suspect some user behavior is causing this, but i cannot determine what. Ive checked the contact list, and its not that.

  Read the article

• Do you know of an online back up & sync solution for Windows that actually works?

  - by Hermann

  I've been looking for some time for a program that backups your data to the cloud and is also able to sync 2 or more computers. By syncing I mean, if I change something on one computer that it should also apply the same change on another computer. I've tried two solutions so far which looked good initially but ultimately failed because they were buggy or simply don't work, or both. Syncplicity has messed up my file structure several times and they don't fix fix bugs that are literally over a year old. I then switched to SpiderOak which looked promising but ultimately had the same problems. Messed up my file structure several times, sometimes sync simply doesn't work, it's extremely inefficient and they keep pushing out releases were they say they fixed the sync bugs I reported but they did't. Does anyone of you know of an online sync solution that actually works?

  Read the article

• Outlook 2010: using signatures stored on network

  - by Gregory MOUSSAT

  With Outlook before the 2010 version, it was possible to specify any path for the signatures. With Outlook 2010, the only way is to use those stored into C:\Documents and Setting\UserName\Local Settings\Application Datas\Microsoft\Signature\ I'd like to point the signatures to a network share. Allowing us to modify the signatures into the share, instead of login on every computers each time we are asked to modify them (and this is quite often because the signatures contain logos about current events). We currently use a script to copy the signatures from the share to the local disk when users login. Question: How to set Outlook 2010 to use signatures outside of the default signature folder ?

  Read the article

• Microsoft InTune in a SBS2008 Environment

  - by Richard Craddock

  I'm looking into using InTune and Office 365, mainly for the licensing benefits it brings but also because our company is moving to having more users based around the globe and I feel it will make managing the computers easier. Currently we have a SBS2008 (Premium) server running Exchange and File and Print which I need to keep for File and Print (Exchange can move to Office 365). I cant find any information on how the AD is synchronized between InTune and the SBS server (as users will still needs access control to file shares on the SBS server). Does anyone have any experience in doing this or even know if its possible? Richard

  Read the article

• Connected to internet but can't browse after trying to remove Covenant Eyes

  - by Joanna

  I recently got a MacBook Pro. It connects to ethernet\wifi and has internet but when I open Safari or Firefox, nothing happens. I get a timeout for all websites. I had Covenant Eyes on my Mac before and tried to remove it. My friends who work with computers have tried everything (ping, nslookup etc). Network diagnostics show no problems I can see I'm connected through ifconfig because I get an IP. I also get a response pinging www.google.gr. There are no proxies set in my Network preferences. Any ideas?

  Read the article

• Uploading with browser makes all other browser tabs and devices disconnect

  - by fabsenet

  Whenever I upload a video to YouTube all other browser tabs behave like there is no connection at all. It even affects my phone and other computers on the network therefor I think it has to do with my router. When the upload is done everything works normally again. I never observed this behavior with any other upload. My router is a Fritz!Box 7390 and my uploading PC is connected through a 1000mb/s switch (wired) to the router. Uploading through another browser does not change anything. I understand that other sites become slow as the network resources are limited, but stopping altogether feels wrong. speed.io measures for my internet connection: 40.894 Kbit/s down, 2.685 Kbit/s up, 29 ms ping, 2.048 con/m connects

  Read the article

• What if a computer with Ethernet

  - by George Nixon

  I'm just revising for an exam on Networks and Data Communications, and there's one thing I don't get about CSMA/CD and Ethernet. It's supposed to be fairly stable, for instance if a computer drops out of the network, it's not a problem like it might be in a token ring network (I think). But Ethernet works by all the other computers waiting for the currently transmitting computer to finish what it's doing, and then the others use CMSA/CD to determine who goes next. What if one computer malfunctioned and kept sending a continuous stream of data in an infinite loop? In fact, is there a standard time for pcs to transmit before they yield to others?

  Read the article

• Clean toshiba a300d 14r

  - by pask

  Hi all, i'm not able to open my notebook, a toshiba a300d-14r. Googling i don't find any useful information... This is official site: http://it.computers.toshiba-europe.com/innovation/jsp/SUPPORTSECTION/discontinuedProductPage.do?service=IT&PRODUCT_ID=1056713&DISC_MODEL=1#0 Anyone have an idea to open it. The fan goes crazy when power on and i suppose that is full of dusty. I need to clean the fan... Is there a guide or a useful information to do it? thanks, A

  Read the article

• Clean toshiba a300d 14r

  - by pask

  Hi all, i'm not able to open my notebook, a toshiba a300d-14r. Googling i don't find any useful information... This is official site: http://it.computers.toshiba-europe.com/innovation/jsp/SUPPORTSECTION/discontinuedProductPage.do?service=IT&PRODUCT_ID=1056713&DISC_MODEL=1#0 Anyone have an idea to open it. The fan goes crazy when power on and i suppose that is full of dusty. I need to clean the fan... Is there a guide or a useful information to do it? thanks, A

  Read the article

• script Disk Management configuration

  - by Joseph

  I have 10 workstations with large monitors that have USB slots and several card readers built in. The card readers cannot be disabled and will map to drive letters when I image the computers. I go into Disk Management and delete the drive mappings and add mappings to a single folder in C:\ with a folder for each slot. I have to do this because of scripts that run that are expecting specific letter drive mappings to network resources. Is there a way to script the deleting and adding of drive mappings instead of having to use the Disk Management GUI manually on each workstation? The workstations are running XP Professional.

  Read the article

• use network drives as mount points during installation?

  - by ajsie

  is it possible to use network storage locations as mount points during installation? cause i want to separate system (ubuntu) with data (personal files). eg. if i have 5 computers i don't want to recreate /home/david 5 times. so i want to mount networkdrive/home to /home in local ubuntu server. so ALL users home folders could be used and maybe also networkdrive/projects to /projects. in that way its ok if i by accident repartitioned the local ubuntu server cause all data is not there on that server, but in the data server. is separating "data" from "logic" good in this case? and is it possible? what protocol should i use for the mapping over internet? (maybe the server is in Sweden, and the data is in Norway). thanks.

  Read the article

• Exchange enrypted messages with a single recipient [portable]

  - by Andy

  I need to exchange encrypted messages with another party. These would be in the form of email like communication (not instant chat). The solution needs to be portable (USB stick). I've tried "Portable Thunderbird/Enigmail/Gnupg/Hotmail account" but it's just impossible to setup portable, countless meaningless error messages. Anyway, I would prefer something more straightforward. Notes: We won't know each others IP addresses. Our computers will often be switched off. Encryption would ideally be using a common password. Is there a solution to this?

  Read the article

• How to open Firefox's "organize bookmarks" from Vimperator?

  - by Igor Popov

  Before using Vimperator, I used Xmarks for organizing and synchronizing bookmarks between computers. Now I installed Vimperator and I can only bookmark a page from command mode with :bmark. How can I open Organize Bookmarks with Vimperator? Besides disabling Vimperator and choosing it from the menu what else can I do? Before, I had CTRL + SHIFT + b to open the organizer. Now, in Vimperator, this shortcut doesn't work anymore, even after temporarily disabling Vimperator with CTRL + z. EDIT After setting the main menu visible (with :set go+=m thanks to Hamish Downer), I saw the shortcut for opening the organize bookmarks dialog (CTRL + SHIFT + o). I recently switched to Ubuntu Linux and in this version of Firefox some keyboard shortcuts are different then in Windows (including the shortcut for opening organize bookmarks). Sorry for my ignorance.

  Read the article

< Previous Page | 116 117 118 119 120 121 122 123 124 125 126 127  | Next Page >