Search Results

Search found 4311 results on 173 pages for 'unix utils'.

Page 120/173 | < Previous Page | 116 117 118 119 120 121 122 123 124 125 126 127  | Next Page >

  • Is Subversion(SVN) supported on Ubuntu 10.04 LTS 32bit?

    - by Chad
    I've setup subversion on Ubuntu 10.04, but can't get authentication to work. I believe all my config files are setup correctly, However I keep getting prompted for credentials on a SVN CHECKOUT. Like there is an issue with apache2 talking to svnserve. If I allow anonymous access checkout works fine. Does anybody know if there is a known issue with subversion and 10.04 or see a error in my configuration? below is my configuration: # fresh install of Ubuntu 10.04 LTS 32bit sudo apt-get install apache2 apache2-utils -y sudo apt-get install subversion libapache2-svn subversion-tools -y sudo mkdir /svn sudo svnadmin create /svn/DataTeam sudo svnadmin create /svn/ReportingTeam #Setup the svn config file sudo vi /etc/apache2/mods-available/dav_svn.conf #replace file with the following. <Location /svn> DAV svn SVNParentPath /svn/ AuthType Basic AuthName "Subversion Server" AuthUserFile /etc/apache2/dav_svn.passwd Require valid-user AuthzSVNAccessFile /etc/apache2/svn_acl </Location> sudo touch /etc/apache2/svn_acl #replace file with the following. [groups] dba_group = tom, jerry report_group = tom [DataTeam:/] @dba_group = rw [ReportingTeam:/] @report_group = rw #Start/Stop subversion automatically sudo /etc/init.d/apache2 restart cd /etc/init.d/ sudo touch subversion sudo cat 'svnserve -d -r /svn' > svnserve sudo cat '/etc/init.d/apache2 restart' >> svnserve sudo chmod +x svnserve sudo update-rc.d svnserve defaults #Add svn users sudo htpasswd -cpb /etc/apache2/dav_svn.passwd tom tom sudo htpasswd -pb /etc/apache2/dav_svn.passwd jerry jerry #Test by performing a checkout sudo svnserve -d -r /svn sudo /etc/init.d/apache2 restart svn checkout http://127.0.0.1/svn/DataTeam /tmp/DataTeam

    Read the article

  • Managing DroboShare SSH usernames and passwords

    - by user17067
    The default login for SSH on the droboshare is a user name of root with a password of giveit2me. With the command passwd the password can be changed. However I can't find anyway to change the default user name. Since any Unix based has a user named root this kinda bugs me as a minor security issue. Does anyone know how to change the user name for droboshare SSH logins? The SSH program being used is a variant of dropbear if that is any help.

    Read the article

  • Apache 2 Fails to Start After Upgrade with No Errors

    - by Mark Davidson
    Hi all Hoping someone can help me with a server issue. Recently we upgraded to the latest apache on 2 boxes within are organisation. One being the master box the other being for failover. The upgrade went fine on the master box but on the failover box apache fails to start with no errors, being output or logged. Both boxes have the exact same configuration so found this a bit strange. I've reinstalled apache and have been through checking the configs and did not find any obvious errors. Eventally I ran a syntax check on each config file being included and found that one of the files apparently has syntax errors. Invalid command 'Order', perhaps misspelled or defined by a module not included in the server configuration Invalid command 'php_value', perhaps misspelled or defined by a module not included in the server configuration Invalid command 'GeoIPEnable', perhaps misspelled or defined by a module not included in the server configuration I've trippled checked all the modules are enabled but it still fails. I've googled the subject of these errors loads but have been unable to fine a solution. I was wondering if anyone had encountered such a problem before and could point me towards a solution. Thanks for your help in advance. P.s: Apache related versions on server. ii apache2 2.2.3-4+etch10 Next generation, scalable, extendable web se ii apache2-mpm-prefork 2.2.3-4+etch10 Traditional model for Apache HTTPD 2.1 ii apache2-utils 2.2.3-4+etch10 utility programs for webservers ii apache2.2-common 2.2.3-4+etch10 Next generation, scalable, extendable web se ii libapache2-mod-geoip 1.1.8-2 GeoIP support for apache2 ii libapache2-mod-php5 5.2.0+dfsg-8+etch15 server-side, HTML-embedded scripting languag

    Read the article

  • Nginx RegEx to match a directory and file

    - by HTF
    I'm wondering if it's possible to match Wordpress directory and specific file in the same location, so at the moment I've got rule to match only the wp-admin directory: ## Restricted Access directory location ^~ /wp-admin/ { auth_basic "Access Denied!"; auth_basic_user_file .users; location ~ \.php$ { fastcgi_pass unix:/var/run/php-fpm/www.sock; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; include fastcgi_params; } } I would like to also match the wp-login.php file but I can't get to work, I've tried the following: location ^~ /(wp-admin/|wp-login.php) { ...

    Read the article

  • Distributing entropy to virtual machines.

    - by Louis
    Dear All, I'm interested in generating secret keys for SSL on virtual machines using true randomness. By true randomness I mean the same level of entropy that can be generated by UNIX's dev/random and entropy gathering daemon (EGD). Is there a "general knowledge" recipe to route entropy from the physical layer to the virtual machines via the hypervisor regardless of the Hypervisor/Guest OS combination? Example: suppose one "hypervises" with VMware VSphere and instantiates Windows Guest OS. Can this hypervisor collect entropy from its peripherals (like dev/random/ would) and distribute it to these guest Windows OS? When considering the big vendors (VMware, Hyper-V, Citrix, etc), do they have entropy pools that gather entropy that can easily be pushed to their respective virtual machines? Louis

    Read the article

  • Nginx: Rewriting entire URI to query string

    - by Doug
    Still pretty new to nginx here, trying to get a simple rewrite to work, but the server just responds '404 not found' My server block server { listen 80; listen [::]:80; server_name pics.example.com; root /home/pics; rewrite ^(.*)$ index.php?tag=$1; location / { try_files $uri $uri/ $uri.php /index.html $uri =404; #try_files $uri =404; fastcgi_split_path_info ^([a-z]+)(/.+)$; include fastcgi_params; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; fastcgi_pass unix:/tmp/php5-fpm.sock; fastcgi_index index.php; } location /doc/ { alias /usr/share/doc/; autoindex on; allow 127.0.0.1; deny all; } } pics.example.com/foobear should rewrite to pics.example.com/index.php?tag=foobear

    Read the article

  • Recommended Configuration to setup Tomcat 7 on windows OS

    - by yashbinani
    I have created a small web application using java/jee which will be deployed in LAN environment. I want to know the recommended hardware configuration. Details are as follows 1) Expected number of hits: 20 hits / hour 2) Number of clients 5-7 3) Application Server : Tomcat 7 4) Database server : MySql App and DB shall be deployed on same machine 5) OS Configuration : Windows XP or any unix flavour ? Can a simple p4/celeron machine with 1 gb ram 8-10 GB hard disk will be sufficient to cater client requests? Server will not be storing too many files/images/videos Client does not want to spend too much on infrastructure.

    Read the article

  • Why should I -minus flags of eselect profile? [closed]

    - by Xsi
    Why not just disable profile and add + + + , and thats it? Rationale. Could I ask ??? second question: where is there a short YES\NO Questions & Answers service? My questions were a subject to closing and deletion at Unix&Linux (as they were not real - we know perfectly admins can't answer and think to help others), but they were long forming in my head, since I'm a very novice user to Linux. My questions were some of that size and were from my point, all-specific, they were not fault ones, but knowledge q's (not to fault), although some not banned questions of others are as short as a line (U&L).

    Read the article

  • FreeNX Server w/ nxagent 3.5 not able to create shadow sessions

    - by Jenna Whitehouse
    I am running a FreeNX server on Ubuntu 11.10 and am unable to do session shadowing. I get the authorization prompt, but the shadow client crashes after. The NX server log in the user's .nx directory is as follows: Error: Aborting session with 'Server is already active for display 3000 If this server is no longer running, remove /tmp/.X3000-lock and start again'. Session: Aborting session at 'Mon Oct 1 14:26:44 2012'. Session: Session aborted at 'Mon Oct 1 14:26:44 2012'. This then deletes the lock file, which is the lock file for the initial Unix session and crashes out. Everything works for a normal session, and shadowing works up to the authorization prompt. I am using this software: Ubuntu 11.10 freenx-server 0.7.3.zgit.120322.977c28d-0~ppa11 nx-common 0.7.3.zgit.120322.977c28d-0~ppa11 nxagent 1:3.5.0-1-2-0ubuntu1ppa8 nxlibs 1:3.5.0-1-2-0ubuntu1ppa8 Any help is appreciated, thanks!

    Read the article

  • Ubuntu + latest samba version, symlinks no longer work on share mounted in windows

    - by Roy Rico
    I just apt-getted (apt-got?) the latest software for my Ubuntu 9.10 linux box, and I noticed that samba was the included in the update. After the install, the symlinks in my home directory no longer work when mounted as a drive in my linux box. They worked literally seconds before I did the update. All my normal directories work just fine. Viewing the directory listing on the command line, all the files, dirs & links have the exact same permissions, yet this is the error I get: Location is not available L:\LinkDir is not accessible. Access is denied. I looked on the forums, and i saw this option for the smb.conf follow symlinks = yes wide symlinks = yes unix extensions = no I put those in, but they had no effect. Has anyone had this problem yet?

    Read the article

  • Firefox Master Password (ssh-agent)

    - by BCable
    I use the master password feature of Firefox, and I also use SSH keys to login to a bunch of UNIX machines. For SSH, there is a very useful application called ssh-agent that runs in the background knowing the required information about unlocking the key so you don't have to type the question every single time you want to connect. I open and close Firefox a lot, so I was curious, is there a way to have Firefox run in the background (preferrably doing nothing, but the whole process would be fine I guess as well) so that I don't have to type my master password every single time I open Firefox? Thanks!

    Read the article

  • SVN check out to samba directory

    - by Jon H
    I'm trying to svn co to a directory on Ubuntu, shared via samba, to OS X, but I get the following error (in OS X). svn: In directory 'site/product/tests' svn: Can't open file 'site/product/tests/.svn/tmp/text-base/._base.py.svn-base': No such file or directory My smb.conf file includes the following changes: unix extensions = no browseable = yes public = yes writable = yes delete readonly = yes create mask = 0775 directory mask = 0775 valid users = %S read only = no The checkout works fine locally (on the Ubuntu machine). What am I missing? More detail: Later inspection showed that the svn error couldn't find the file with 3, then 2 underscores: .___init__.py.svn-base Whereas listing the directory in OS X showed 2, then 2 underscores: __init__.py.svn-base And listing the same directory in a successful checkout on Ubuntu shows nothing (because it's a temporary directory?) I've tried the mangled = no setting in share settings, to no effect.

    Read the article

  • LDAP (slapd) creating users with access to specific trees

    - by Josh
    I am setting up a CentOS server with Virtualmin and Postfix, and I am trying to use LDAP to store unix users, groups, Postfix aliases and virtual domains. I am following the instructions from Webmin's site. I have created an LDAP domain and configured Postfix to fetch Aliases and Virtual Domains from LDAP, but in order to do so I had to configure postfix to authenticate with the master LDAP account, cn=Manager,dc=mydomain,dc=com. This seems like a terrible idea because that account has access to the Users and Groups, which postfix does not need access to. How can I create a new LDAP account for Postfix which only has access to the LDAP trees Postfix needs?

    Read the article

  • Usermin (Webmin)- Users can't login

    - by Armadillo
    I've installed Webmin in my server. The users of my Unix server must be able to change their passwords. So, for that, they use Usermin. But users just can't login in Usermin module. I get always this message: Login failed. Please try again. What is the reason for this behavior? How can I give access to Usermin to my users? I'm able to login as any user when viewing "Current Login Sessions" - "Switch to Usermin user:", with the Admin user.

    Read the article

  • Sharing an external hard drive in Ubuntu using Samba

    - by cambraca
    /media/MYDISK is where my hard drive is mounted automatically. I created a symlink using: ln -s /media/MYDISK /home/camilo/MYDISK chmod 777 /home/camilo/MYDISK I'm setting up smb.conf like this: [myshare1] comment = external disk browsable = yes path = /home/camilo/MYDISK guest ok = yes read only = no create mask = 0775 Also, in the [global] section I tried adding the following lines: follow symlinks = yes wide links = yes unix extensions = no The problem is that when browsing the shared folder in Windows 7, I get a "\\etc\myshare1 is not accessible" error. When pointing the path to a regular folder it works fine. Also, when I point it directly to /media/MYDISK, it shows the same error. EDIT: to make it more interesting, I have no graphical interface, so I need to touch the config files directly..

    Read the article

  • How can I create persistent SSH connection to "stream" commands over a period of time?

    - by Darth
    Say that I have an application running on one PC that is sending commands via SSH to another PC on the network (both machines running Linux). For example every time something happens on #1, I want to run a task on #2. In this setup, I have to create SSH connection on every single command. Is there any simple way to do this with basic unix tools without programming custom client/server application? Basically all I want is to establish a connection over SSH and then send one command after another.

    Read the article

  • Match exactly (and only) the pattern I specify in a grep command

    - by palswim
    Usually, grep searches for all lines containing a match for the pattern/parameter I specify. I would like to match just the pattern (i.e. not the whole line). So, if a file contains the lines: We said that we'll come. Unfortunately, we were delayed. Now, we're on our way. I want to find all contractions starting with "we" (regex pattern: we\'[a-z]+/i). And I'm looking for the output: we'll we're How do I do this (with grep or another Unix/Windows command-line tool)?

    Read the article

  • ${extension} empty after catch-all alias in Postfix

    - by Paul Wagener
    I want a setup where an e-mailaddress like [email protected] redirects mail to the folder foo. I've already got dovecot configured and tested. It is called by postfix with this line in master.cf: dovecot unix - n n - - pipe flags=DRhu user=vmail:vmail argv=/usr/lib/dovecot/deliver -f ${sender} -d ${user}@${nexthop} -n -m ${extension} I expect ${extension} to expand to 'foo' but it is always empty. I've added recipient_delimiter = + to my main.cf. How can I get it to work? Update: I've got a catch-all alias that redirects @domain.com to [email protected]. It seems that the extension is empty because of this. So the question becomes: Can I have a catch-all so that [email protected] redirects to [email protected] without explicitly defining either the random or the ext part?

    Read the article

  • Sharing an external hard drive in Ubuntu using Samba

    - by cambraca
    /media/MYDISK is where my hard drive is mounted automatically. I created a symlink using: ln -s /media/MYDISK /home/camilo/MYDISK chmod 777 /home/camilo/MYDISK I'm setting up smb.conf like this: [myshare1] comment = external disk browsable = yes path = /home/camilo/MYDISK guest ok = yes read only = no create mask = 0775 Also, in the [global] section I tried adding the following lines: follow symlinks = yes wide links = yes unix extensions = no The problem is that when browsing the shared folder in Windows 7, I get a "\\etc\myshare1 is not accessible" error. When pointing the path to a regular folder it works fine. Also, when I point it directly to /media/MYDISK, it shows the same error. EDIT: to make it more interesting, I have no graphical interface, so I need to touch the config files directly..

    Read the article

  • Tips and tricks to make NX server more stable

    - by gareth_bowles
    My shop has been using the FreeNX server on Fedora 11 for a while now and mostly getting good results, especially with performance, but we have some annoying problems with client connections. There are two main issues: Client sessions sometimes freeze after a long time (seems to be at least 2 hours of having the session active) We often have to make multiple attempts to start a new client session, especially if a previous session was suspended rather than terminated. In qwuite a few cases, we've had to restart the NX server to get around this. Our NX server configuration is the default except that we've enabled logging level 7 to /var/log/nxserver.log, and set the font server to "unix:/7100" so that it uses xfs. Does anyone have any ideas for making things more stable ?

    Read the article

  • How can i use my local mysqldump through ssh tunnel

    - by Matthias Kleine
    I would like to dump a mysql-database with mysqldump. But: This command isn't installed on the remote server. It is possible to use my local mysqldump command, to connect via an ssh tunnel to achieve this? I found several solutions, but each one required the mysqldump command directly on the server. When I use Sequel Pro (an Mac OS X App), I can perform an export via an SSH tunnel. But this is not the fastest solution and cannot be used on a unix server...

    Read the article

  • Installing maven on Ubuntu by manual download

    - by WebDevHobo
    To install Maven, I downloaded the latest version from the website and then followed these steps: http://maven.apache.org/download.html#Installation The last step, the version control, does not work. It says that 'mvn' is currently not installed and that I should type sudo apt-get install maven2 If I go directly to the mvn file itself, it does work: root@ubuntu:~# /usr/local/apache-maven/apache-maven-2.2.1/bin/mvn --version Apache Maven 2.2.1 (r801777; 2009-08-06 12:16:01-0700) Java version: 1.6.0_21 Java home: /usr/java/jdk1.6.0_21/jre Default locale: en_US, platform encoding: UTF-8 OS name: "linux" version: "2.6.32-25-generic" arch: "i386" Family: "unix" So, what am I doing wrong here? Or what would and apt-get install do extra that I might have forgotten?

    Read the article

  • I run a command twice - I'm wondering if it'll be a problem

    - by Delirium tremens
    "In computing, tee is a command in various command-line interpreters (shells) such as Unix shells, 4DOS/4NT and Windows PowerShell, which displays or pipes the output of a command and copies it into a file or a variable. It is primarily used in conjunction with pipes and filters." I run echo FRAMEBUFFER=y | sudo tee /etc/initramfs-tools/conf.d/splash twice. I opened the conf.d folder in Nautilus, but there isn't a splash file nor directory. I expected a file to be there with FRAMEBUFFER=y inside but there isn't. Is this going to be a problem?

    Read the article

  • MySQL on Windows - how do I set the wait_timeout for connections using named pipes?

    - by gustafc
    I use a MySQL database running on a Windows box, and for performance reasons I'm connecting to it using named pipes. The (Java) application using the database (through Hibernate) can let the connection lie idle for quite a long time, which causes the connection to fail with the following message: com.mysql.jdbc.exceptions.jdbc4.CommunicationsException: The last packet successfully received from the server was 33 558 297 milliseconds ago. The last packet sent successfully to the server was 33 558 297 milliseconds ago. is longer than the server configured value of 'wait_timeout'. You should consider either expiring and/or testing connection validity before use in your application, increasing the server configured values for client timeouts, or using the Connector/J connection property 'autoReconnect=true' to avoid this problem. autoReconnect unfortunately has no effect (and neither does autoReconnectForPools), but the wait_timeout docs state that wait_timeout only applies "to TCP/IP and Unix socket file connections, not to connections made via named pipes, or shared memory". How can I change the wait_timeout for named pipes?

    Read the article

  • Bridging Wireless and Wired Interfaces in Linux

    - by The Daemons Advocate
    My network setup is something like: Wireless Router <---> Netbook <---> Ubuntu Desktop ...or, more verbosely (with interfaces): Wireless Router <--(wireless)--> (eth2) Ubuntu Netbook Ubuntu Netbook (eth0) <---(wired)----> (eth0) Ubuntu Desktop In a perfect world, I'd have the desktop wired, but weird circumstances combined with my wanting to understand more about networking in linux make me want to figure out how to bridge these two devices. A bit of googling has given me this example using bridge-utils, and here's how I'm (failing) to setup the bridge (on the netbook): sudo -i ifconfig eth0 0.0.0.0 ifconfig eth2 0.0.0.0 brctl addbr bridget brctl addif bridget eth0 brctl addif bridget eth2 ifconfig bridget up ...then, trying to make sure that the netbook can still get on the internets... route add default gateway 192.168.2.1 dhclient bridget What happens after this is that the dhclient command above (netbook) doesn't get served an IP, and the Desktop, if I run dhclient, it doesn't get served an IP. Some weird considerations might be that I'm running the Network Manager Applet that comes with Ubuntu. While I'm sure I can get a command line wireless configuration setup, it's a bit complex. Can someone give me a shout as to where I'm going wrong? I'd also like to note another related question titled 'Bridging my laptop’s wireless and wired adaptors', however the setup is different to mine.

    Read the article

< Previous Page | 116 117 118 119 120 121 122 123 124 125 126 127  | Next Page >