Search Results

Search found 4035 results on 162 pages for 'advanced queuing'.

Page 121/162 | < Previous Page | 117 118 119 120 121 122 123 124 125 126 127 128  | Next Page >

• Cannot install windows. Compaq Presario CQ62

  - by Matthew

  I bought a used Compaq Presario CQ62 for cheap, and went to install windows on it. I formatted the partition and went to install when I got this error.... Windows cannot install required files. The file may be corrupt or missing. Make sure all files required for installation are available and restart the installation. Error code: 0x80070017 I have used this disk before with no problems, but internet searching suggested I burn one at 2x speed because that helps for some reason... I'm burning one now, but my question is, why would I get this error, OTHER than the disc being bad? I'm pretty certain this one isn't as I have used it before... (ok so the slowly burned cd (using imgburn) didn't work either so it's DEFINITELY not the disc) Thanks in advanced for any answers Also I took one stick of ram out because internet searching also suggested that, but it didn't make a difference. Also I ran memory and hard drive checks and they passed fine. Also I reset the motherboard options to default What could it be!? Help I'm completely stumped...

  Read the article

• How to perform this Windows 7 permissions change on many files via GUI or command line

  - by hippietrail

  After using my external hard drive on another Windows 7 computer to tweak photos with Windows Live Photo Gallery then upload them to Facebook I found the modified images were now not visible on the original Windows 7 computer. I'm not sure if the things I tried to get it working subsequently changed anything, but I do know this is the sequence of actions that makes the permissions of the modified files match those of the unmodified files: Right click on broken image file, select "Properties" On the "Security" tab press the "Advanced" button In the "Permissions" tab press the "Continue" button with the shield icon on it Tick the box marked "Include inheritable permissions from this object's parent Click the "Remove" button to remove the only current entry "Type: Allow, Name: Administrators (XYZ\Administrators), Permission: Full control, Inherited From: OK on the "Permissions" tab. OK on the "Security" tab. Now this same procedure does not work at the folder level. It results in "access denied" dialogs. I'm looking for some way to perform this exact modification on all the images I edited on the other computer. I'm happy to use the Windows GUI in Explorer or any other included tools. I'm happy to use the Windows command line. I'd prefer not to use a third-party tool since I'd have to be satisfied it's not doing anything else. I'm not looking for a different way to change permissions to other settings to make an external drive full of photos editable on multiple computers. At least not in this question.

  Read the article

• Copying files to my laptop makes them locked

  - by John

  When I save files from e.g. remote desktop or from an email (outlook) attachments, or from skype even to my local machine they show a locked Icon on the file. Then e.g. SQL Server doesn't let me restore backups as it says the operating system doesn't have access to the file. I've had success fixing this by setting the ownership of the parent folder to my user and then let it apply to sub folders. Also sometimes I need to click - Proerties - Security - Advanced - Change Permmissions, then check "change child permissions..." and apply on the parent dir. I'm using Windows 7 64 bit Proffessional, on HP Probook 4530, and I have a administrator user. This is a real pain to do everytime. I suspect it might be because of HP software that came with the laptop, I think there is drive encryption as part of the protect tools. Although I'm hoping there's something in windows i can set to change the behaviour to not lock these files.

  Read the article

• How to resolve 'No internet connectivity issues' with a Virtualised 2008 R2 Server using Forefront UAG

  - by user684589

  I have spent some considerable time reading up on as many possible blogs and articles as I can to help me solve why my VM (Running on Hyper-V) for DirectAccess has suddenly stopped being able to access the internet. The VM setup shares the same internet connection on which I have written and submitted this question so I know that the actual underlying internet connection is fully functional. Previous to last week the DirectAccess was fully functional and had no issues. This is a recent problem which was led up to by a number of consistent crashes on the DA machine when access was attempted. Upon reboot all seemed well until recently. I am not certain whether it is relevant, but previously to this I had a number of power issues where the entire VM host shutdown unexpectedly leaving around 8 VM's in a bad way. Upon restart, the UAG DirectAccess machine was unable to access its configuration service (although the service was started) but this seemed to relate to the Light-Weight Active Directory Service AD LDS which had a corrupted database. Having repaired this database, I restarted the service and could subsequently reconnect to the configuration service again. For good measure I re-bound the network adapters (virtualised through Hyper-V) and DirectAccess claimed to be all happy again. However as it stands my machine is still unable to access the internet showing the "No internet connectivity" exclamation mark for the external facing NIC. I have also tried removing the adapters, disabling, re-enabling and the problem persists. The intranet part of the VM CorpNet seems to be fully functional as before and I'm running out of ideas. Any input would be greatly appreciated. I am not an advanced Domain Administrator so please be gentle.

  Read the article

• Anyone have a script to delete a specific local windows profile?

  - by Jordan Weinstein

  I'm looking for Powershell (preferred) script, or .CMD or .VBS, to delete a specific user profile on a workstation (WinXP) or terminal server (2000, '03 or '08). I know all about the delprof utility... That only allows you delete based on a period of inactivity. I want a script to: prompt admin for a username delete that username's profile and to delete the entire profile - registry hive too (not just the folder structure within Documents and Settings). The same way it would if you went to My Computer Properties Advanced tab User Profiles Settings and deleted profiles from there. Any ideas? All I can think of is doing an AD lookup to get the SID of the user specified, then using that to delete the correct registry hive too... something simpler would be nice though... Basically, my HelpDesk used to be local administrators on our Citrix servers and a common fix for various issues was for them to delete a user's profile on the citrix server(s) and have that user log back in - voila, whatever issue they had was resolved. Going forward, in new Citrix environment, they will no longer be local admins on those boxes, but still need to be able to delete profiles (deleting the entire profile: folder and reg hive is key). thanks.

  Read the article

• Windows Server 2003 (w/Exchange) move to new machine

  - by James Booker

  I have an ageing domain controller (the only one on a 10-pc network) which needs rebooting often. I have a Dell Poweredge 2850 server doing nothing, so I'd like to move the DC to that, but here's the catch - I don't have Win2k Server Std install media any more as it's been lost. I purchased "Easus Todo Backup Advanced Server" which claims to be able to recover to dissimilar metal, but it's not quite working (although I don't think it's the product's fault) I know the server and PERC RAID card are good because I installed Ubuntu on the logical drive (4 x 72GB disks RAID 5) no problems. I've booted frmo the Easus Todo backup CD (which is WinPE based) and recovered to the logical disk on the RAID (after installing driver inside the WinPE environment from a NAS drive) The problem is when I boot the server, I can get the OS selection menu, but any option results in a blank screen, with no errors. I figure this is probably because the driver wasn't installed on the old machine (which is IDE-based (i know, i know!) and doesn;t have a RAID controller) I've booted from the CD and copied the mraid35x.sys file to the c:\windows\system32\drivers folder on the recovered system, but it makes no difference. I made a boot.ini with rdisks 0-10 defined, and booting from each of these resulted in a file error (i.e. 'this isn't a real disk') - the only disk that gets any response (the blank screen) is multi(0)disk(0)rdisk(0)partition(1) which just gives me the blank black screen and no disk activity. Is there any way I can force the drvier to be installed on the source system (so i can do a full backup again), i've tried right-clicking the oemsetup.inf and clicking install, but it didn't actually do anything. I attempted to force it with the 'Add new hardware' wizard and forcing with the 'have disk' option but it still gave me no hardware to select. Also I've got an identical machine running WinXP which uses the PERC driver successfully (which was obviously done at install time) and the boot.ini settings are the same : multi(0)disk(0)rdisk(0)partition(1) Any ideas would be appreciated.

  Read the article

• How do I fully share a Hard Drive on my Local Network?

  - by GingerLee

  I have 4 computers connected to a router (DD-WRT) My main PC is Windows 7 (Home Premium). This machine has 2 Hard Disks: HD1 is used for my OS and the other (HD2) is used to store files. My 3 other machines are 1. Ubuntu Destop that I use to learn about linux, 2. A Mac OSX laptop, and 3. A netbook running windows 7. How do I easily share HD2 with my other machines? I would like all my machines to have full access & permissions to HD2 however I would like to RESTRICT access to only PCs that are connected to my router (either via LAN and WiFi) --- btw, I know this is not very secure due to WiFi vulnerability , however, I currently MAC address restrict WiFi connections my router. Extra Info: I have already tried to use the Windows Folder Sharing feature: i.e. I right click over the icon of HD2, and click on the Sharing Tab, but in sub-window labeled "Network File and Folder Sharing", the "Share" button is grayed out. I can click on "Advanced Shared" but that just takes me to a screen in which I have to set certain permissions. What is not clear to me is: How do I set a criteria that shares HD2 with all computer connected to my router?

  Read the article

• Best solution top keep data secure

  - by mrwooster

  What is the simplest and most elegant way of storing a small amount of data in a reasonably secure way? I am not looking for ridiculous levels of advanced encryption (AES-256 is more than enough) and I am only looking to encrypt a small number of files. The files I wish to encrypt are mostly comprised of password lists and SSH keys for servers. Unfortunately it is impossible to keep track of ever changing passwords for my servers (and SSH keys) and so need to keep a list of the passwords. Obviously this list needs to be secure, and also portable (I work from multiple locations). At the moment, I use a 10MB encrypted disk image on my mac (std .dmg AES-256) and just mount it whenever I need access to the data. To my knowledge this is very secure and I am very happy using it. However, the data is not very portable. I would like to be able to access my data from other machines (especially ones running linux), and I am aware that there are quite a few issues trying to mount an encrypted .dmg on linux. An alternative I have considered is to create a tar archive containing the files and use gpg --symmetric to encrypt it, but this is not a very elegant solution as it requires gpg to be installed on every system. So, what over solutions exist, and which ones would you consider to be the most elegant? Ty

  Read the article

• Exchange 2003 inbound routing issue

  - by user565712

  Just recently we started experiencing inbound routing issues. Email adddressed to [email protected] is intermittantly translated to [email protected]. This is happening for several users and, as stated, is intermittant. I don't know where to start looking for the solution. Is this an Exchange issue? A DNS issue? We have a single Exchange server inside our network with an FQDN of server.domain.local with a single SMTP Virtual Server. The Advanced properties of the Delivery tab of the Virt Server has an empty Masquerade Domain textbox and the value for the FDQN text-box is set to the domain itself, domain.com. The DNS record for domain.com is a CNAME entry referencing www.domain.com. Is this somehow related to the problem? I checked the headers of the inbound messages that generated NDRs as a result of being sent to [email protected] and nowhere in the header is www.domain.com mentioned. To make my life even more difficult, we use Postini as a third-party SPAM filtering service. Our MX records point to the Postini servers and Postini delivers the messages to our server. Perhaps it is Postini that is mucking things up? sigh I'm having trouble with this one and the intermittent aspect is making it that much more difficult for me. Any ideas?

  Read the article

• Wi-Fi won't automatically connect (box in Windows configuration gets unchecked)

  - by greg88

  The checkbox that says "Use windows to configure my wireless network settings" keeps getting unchecked (Wirless Network Connection - Change advanced settings - Wireless networks tab.) How do I stop that from happening? (So the wi-fi will reconnect.) When I manually re-check the box, it automatically connects.) I have a D-Link AirPremier DWL-G550 PCI adapter. I installed the newest driver, 5.3.0.46, and that didn't solve the problem. I took the "Atheros Client Utility" (the program window says "D-Link AirPremier Client Utility" when you run it) out of the start menu, rebooted, and that didn't solve the problem. (That utility puts a signal bar similiar to the one MS Windows puts there, and it's gone now.) The D-Link client utility has an option to automatically connect to preferred networks, but it is greyed out. It is also greyed out if I install the driver and utility right off the D-Link installation CD, so the problem isn't that the utility and driver are incompatible versions. I want to use Windows to handle the connection anyway, as the D-Link utility is garbage. Windows XP SP3 w/all current updates.

  Read the article

• Print job leaves queue but document isn't printed

  - by midnightstar

  I'm dealing with an HP Deskjet F380 All-in-One printer. It's connected via USB to a desktop running Windows 7 Enterprise x64. If I attempt to print something like a web page or a word document, the print job will show up in the print queue and the printer would stir. By stir, I mean, it would seem to prepare itself to print. However, the print job would then leave queue (I'm thinking the computer sees it as completed) and the printer would never actually print anything. However I went into Printers and Devices under the Windows start menu, into printer properties, and print a test page, the test page would print out successfully. I attempted to uninstall and re-install the printer drivers for the printer, but the printer would continue the same behavior afterwards. I also connected the printer to another computer and the printer will print just about anything. I also checked to make sure that the computer the printer needs to be connected to was update to date as far as the OS. The machine is fully up to date. I played with the way the computer handles printer spooling. Under the printer properties, under the "Advanced" tab, I had the print job print directly to the printer. In all these instances, the same behavior continues. I've restarted the printer spooling service. I've also gone under C:\Windows\System32\spool\PRINTERS and deleted files that were sitting in the folder. I have ran SFC /scannnow and the system found no errors in the system's integrity. I had the computer and printer make a cold reboot individually. The only lead I really have going for me is that since the printer prints on other PCs, I can only assume that there is something wrong with the way the PC is configured.

  Read the article

• How should an experienced Windows SysAdmin learn Linux? [closed]

  - by Systemspoet

  I have a new hire starting in a few weeks who is an experienced Windows SysAdmin. I think he's fairly senior on the Windows side, with a pretty deep AD understanding and experience with Exchange 2007, 2010, and exchange migrations. He's done a little PowerShell but I suspect more of the "run this command to do this" variety then "write a script to do this" sort. However, we are a mixed shop and (he knows this) I expect him to become a reasonably competent Linux SysAdmin over time. I'm looking for good starting points to bring him along. I have over ten years of Linux/UNIX experience, so it all sort of seems intuitive to me, but I've been thinking about the toolkit you actually need to be productive in the Linux CLI world. Just to be able to use the machines at all, off the top of my head... vi Basic CLI stuff -- move around, rename files, copy files, tar, gzip, changing passwords, finding relevant manpages, keep track of where you are, find things in your history, etc, etc. More advanced things that I take for granted but are actually pretty hard -- doing things with 'find', extracting relevant text via 'awk' and/or 'cut', knowing when to use 'grep' and when to use 'grep -e' or 'egrep'. Distribution specific stuff... compiling software, rpm, yum, apt-get, you name it. This all seems pretty basic to me, but when I think back to 1995 when I was first learning my way, some of those things took me years to master. So my question is -- where should I send him to pick up those skills? I'm not just thinking of classes, but rather also websites and books? Where do you all suggest as a starting point for picking up Linux skills?

  Read the article

• Ubuntu 12.04 can't boot after installing with software RAID 1

  - by Bill

  I've been trying to install Ubuntu with software RAID on my server and there is obviously something that I don't understand about the process. This is the guide that I followed: https://help.ubuntu.com/11.04/serverguide/advanced-installation.html I have two identical 1 TB disks in my server. I went through the initial install process and manually set up my partitions. On each disk I set up: (1) 100 MB partition for EFI boot (I didn't originally have this but added it based on a forum post I found after my original install failed to boot, I ended up with EFIboot since that was what the 'guided partitioning' decided to do) (1) 970 MB partition for / (1) 30 MB partition for swap I then created new RAID 1 disks combining the two partitions, one from each disk, such that each partition is mirrored. I then configured their usage as stated above. After saving the configuration I said yes to boot in a degraded state. The rest of the setup went normally, no errors of any kind. I saw GRUB being installed and again no errors. However, after rebooting the server I get the dreaded 'Insert boot media' and nothing happens. I loaded up the recovery disk and the mdadm configuration looks correct. md0 is my EFIBoot partition md1 is my \ partition using ext4 md2 is my swap partition Running file -s /dev/md0 doesn't indicate that GRUB is there and so I attempted to reinstall GRUB using the recovery disk. I selected the md0 disk and it appeared to install just fine. Running file -s /dev/md1 shows the error needs journal recovery, I'm not sure if that's related or not or how to fix that. Rebooting gives me the same problem, no boot media found. I've searched around the internet but can't figure out what to do next or more importantly how to troubleshoot what exactly is going wrong. Thanks!

  Read the article

• Trying to diagnose network problem: ping 127.0.0.1 (or any address) results in error code 1

  - by Mnebuerquo

  NIC seems to be working, as windows detects the hardware and has a driver and reports success. DHCP seems to have gotten an ip address, 192.168.1.101. I released and renewed it and it seemed to work normally. I tried ping 127.0.0.1 as first step of testing network configuration. Pinging 127.0.0.1 with 32 bytes of data: PING: transmit failed, error code 1. I read somewhere that net helpmsg [error code] would give a human readable name for the error code. net helpmsg 1 says "Incorrect function" I've tried disabling the firewall and antivirus in McAfee SecurityCenter and I still get the same error. Could the firewall/antivirus be breaking it even if disabled? Broadcom Advanced Control Suite 2 is installed, and its network test passes all tests, including ping 192.168.1.1 which is the default gateway. If I try ping 192.168.1.1 from the command prompt I get the error code 1 again. So does anyone have any theories that would explain this problem? Other tests I should try? Thanks!

  Read the article

• Windows - Decrypt encrypted file when user account is destroyed

  - by dc2

  I have a Virtual Machine running on my Windows Server 2008 computer that originally was received by me encryped, as the builder of the VM did it on a MAC, which decrypts files by default. I never thought to decrypt these files, as they automatically 'decrypt' when you have permission over them, so the VM has been running for over a year despite the encryption. I just upgraded my computer to Domain Controller (dcpromo.exe). Now when I try to access/run the VM, I can't because I don't have permission to decrypt the files as that was on another logon (local administrator) and now I am the domain administrator. Apparently the local admin is totally nuked when you upgrade to domain controller. I have tried EVERYTHING - taking ownership of the files, which works. Doesn't do anything for me. Adding full control to everyone on the files. I go to File Properties Advanced Details (under encryption) Users who can access this file. The only user is administrator@localcomputername, and there is a cert number. I try adding a new cert, I don't have permission. I don't have permission to: Decrypt the file (access is denied). Copy the file (to another computer) - access denied. I am totally stumped and this VM is a production machine and needs to get up right now. Does anyone have any ideas?

  Read the article

• Route all traffic of home network through VPN

  - by user436118

  I have a typical semi advanced home network scenario: A cable modem - eth A wireless router (netgear n600) eth and wlan A home server (Running ubuntu 12.04 LTS, connected over wlan) A bunch of wireless clients (wlan) Lying around I have anoher cheaper wlan router, and two different USB wlan NIC's that are known to work with Linux. ACTA struck. I want to route ALL of my WAN traffic through a remote server through a VPN. For sake of completition, lets say there is a remote server running debian sqeeze where a VPN server is to be installed. The network is then to behave so that if the VPN is not operative, it is separated from the outside world. I am familiar with general system/network practices, but lack the specific detailed knowledge to accomplish this. Please suggest the right approach, packages and configurations you'd use to reach said solution. I've also envisioned the following network configuration, please improve it if you see fit: ==LAN== Client ip:10.1.1.x nm:255.0.0.0 gw:10.1.1.1 reached via WLAN Wlan router 1: ip: 10.1.1.1 nm:255.0.0.0 gw: 10.10.10.1 reached via ETH Homeserver: <<< VPN is initiated here, and the other endpoint is somewhere on the internet. eth0: ip:10.10.10.1 nm: 0.0.0.0 gw:192.168.0.1 reached via WLAN Homeserver: wlan0: ip: 192.168.0.2 nm: 255.255.255.0 gw: 192.168.0.1 reached via WLAN ==WAN== Wlan router 2: ip: 192.168.0.1 nm: 0.0.0.0 gw: set via dhcp uplink connector: cable modem Cable Modem: Remote DHCP. Has on-board DHCP server for ethernet device that connects to it, and only works this way. All this WLAN fussery is because my home server is located in a part of the house where a cable link isnt possible unfortunately.

  Read the article

• Unable to delete a file or take ownership on Win7x64

  - by Basic

  I'm a developer and as part of the build process, a Microsoft dll is copied to a certain folder. That file copy is now failing as the target can't be overwritten. I decided to delete it by hand (using an admin account but a non-elevated explorer) so browsed to the folder and attempted a delete. This failed (Require permission from the Administrator). The same applies when using an elevated explorer. So I tried Properties-Security-Advanced-Ownership The current owner is showing as Unable to display current owner. I can't take ownership (a simple Access Denied message with no elaboration). Elevated Command Prompt/PowerShell don't help either (both give an Access Denied in their own way). Process explorer shows no open handles on the file. Eventually, I booted to linux and deleted the file but what I'd like to know is what caused it? Security Essentials had no issues with the file. It's digitally signed by MS and the signatures match.

  Read the article

• Creating MS Word 2010 Relative Links?

  - by leeand00

  Okay here is what I've tried so far for creating relative links in my MS Word Documents. In my document from the ribbon I select the File tab. I then select Info from the side bar. Click the properties drop down from the right hand column. (a bit difficult to find initially, since it looks like text not a drop down, but it's there). Click Advanced Properties The <document-name>.docx Properties Dialog Appears I enter .\ to specify that I want a relative path for the links in my document. I click OK. I go back into my document select some text and attempt to make a link out of it clicking the Insert tab of the ribbon, and then clicking Hyperlink. I then select a document from the current folder, and strip the full path from it, leaving just the name of the .docx file to which I wish to link. Then I click OK. The link appears, I try to click it using Ctrl+Click. I am informed that the address of the site is not valid. Check the address and try again. What could I possibly be doing wrong here? I just want a relative link. It's so easy in to do this in HTML.

  Read the article

• Apache downloads php files instead of running their source

  - by Devils Child

  I have just recently upgraded PHP 5.3 to 5.4 on my Debian Squeeze server. Now, instead of executing PHP files, Apache just downloads them, which is really bad. When I try to follow these steps, I get "broken packages" upon installing the libapache2-mod-php5 package. Also the answer tells me to add something to my httpd.conf, but it's empty. Question: How can I make apache execute php files again, instead of just passing them through as download? dpkg -l | grep php returns this rc libapache2-mod-php5 5.3.3-7+squeeze15 server-side, HTML-embedded scripting language (Apache 2 module) rc php5-cli 5.3.3-7+squeeze15 command-line interpreter for the php5 scripting language ii php5-common 5.4.15-1~dotdeb.2 Common files for packages built from the php5 source rc php5-gd 5.3.3-7+squeeze15 GD module for php5 rc php5-mcrypt 5.3.3-7+squeeze15 MCrypt module for php5 rc php5-mysql 5.3.3-7+squeeze15 MySQL module for php5 rc php5-suhosin 0.9.32.1-1 advanced protection module for php5 rc phpmyadmin 4:3.3.7-7 MySQL web administration tool And apt-get install libapache2-mod-php5 produces this error The following packages have unmet dependencies: libapache2-mod-php5 : Depends: libdb5.1 but it is not installable Depends: libssl1.0.0 (>= 1.0.0) but it is not installable Depends: libxml2 (>= 2.8.0) but 2.7.8.dfsg-2+squeeze7 is to be installed Recommends: php5-cli but it is not going to be installed E: Broken packages

  Read the article

• Route all traffic of home network through VPN [migrated]

  - by user436118

  I have a typical semi advanced home network scenario: A cable modem - eth A wireless router (netgear n600) eth and wlan A home server (Running ubuntu 12.04 LTS, connected over wlan) A bunch of wireless clients (wlan) Lying around I have anoher cheaper wlan router, and two different USB wlan NIC's that are known to work with Linux. ACTA struck. I want to route ALL of my WAN traffic through a remote server through a VPN. For sake of completition, lets say there is a remote server running debian sqeeze where a VPN server is to be installed. The network is then to behave so that if the VPN is not operative, it is separated from the outside world. I am familiar with general system/network practices, but lack the specific detailed knowledge to accomplish this. Please suggest the right approach, packages and configurations you'd use to reach said solution. I've also envisioned the following network configuration, please improve it if you see fit: Client ip:10.1.1.x nm:255.0.0.0 gw:10.1.1.1 reached via WLAN Wlan router 1: ip: 10.1.1.1 nm:255.0.0.0 gw: 10.10.10.1 reached via ETH Homeserver: <<< VPN is initiated here, and the other endpoint is somewhere on the internet. eth0: ip:10.10.10.1 nm: 0.0.0.0 gw:192.168.0.1 reached via WLAN Homeserver: wlan0: ip: 192.168.0.2 nm: 255.255.255.0 gw: 192.168.0.1 reached via WLAN Wlan router 2: ip: 192.168.0.1 nm: 0.0.0.0 gw: set via dhcp uplink connector: cable modem Cable Modem: Remote DHCP. Has on-board DHCP server for ethernet device that connects to it, and only works this way. All this WLAN fussery is because my home server is located in a part of the house where a cable link isnt possible unfortunately.

  Read the article

• Routing connections through VPN based on hostname (not IP range)

  - by Michal M

  This bugs me immensly. I need to connect to client's network through VPN. But I definitely do not want to send all the traffic through client's network so this option is out of question. What I need basically is for the OS to know that all client's network subdomains (*.example.com) need to go through the VPN connection. I tried a couple of options: Changing order of services and setting the VPN on top, but this works the same as "Send all traffic over VPN connection". Using "VPN on Demand" option from network advanced options, but this feature is quite rubbish to be honest. Seems to work only in Safari (?!) and it doesn't route the connection, but it basically triggers the OS to connect to the selected VPN. The reason I need it to work based on hostnames rather than IP range is simple - my client has a lot of servers inside his network and it's impossible for me to remember all IPs. They are all within a range, but this doesn't help me remembering. Another option would be to put the VPN connection on the bottom of network services and untick "Send all traffic..." and then put all known hostnames in hosts file, but considering there could be hundreds of servers (therefore hostnames and ips too) it ridiculous job. And if new server appears on the network I'd need to edit the hosts file again. Sisyphean labours. However this works on Windows very simply. If a hostname is not available through default network interface, then it seems to try VPN connection and this works brilliantly. So, how can I achieve that on Mac, then? I know client's internal DNS addresses if that is of any help (like directing a certain domains through a different DNS)? PS. Using latest version 10.6.6. PS2. I am using VPN to access intranet, version control servers (svn://), samba shares and for SSH access to servers.

  Read the article

• Some Portions of Computer Running Slow (Specifically Graphics)

  - by Mike Gates

  I noticed that a few things are running slow today on my Windows 7 laptop. Specifically, they are: Opening and closing windows takes several seconds for the animation to complete. Windows media player opens fine, but the movies are very laggy MMORPG's, such as RuneScape, are extremely laggy When waking my computer from sleep mode, after entering my password, my desktop takes about 3 seconds to fade in Other than those, everything runs at a normal speed. Things I've done that maybe contributed to this problem: Changed the graphics processor (by plugging in/unplugging the charger) [however, no matter how I change the graphics, I'm still getting this lagginess] Installed AdBlock, a Firefox addon [I recently removed it, and I'm still experiencing this problem] Went into Advanced System Settings, Clicked Settings, and unchecked a few visual things (such as the animation for opening and closing windows) [sure, this got rid of the opening/closing windows lag, but I like that little animation - plus that leaves all the other lag problems I'm experiencing] So, does anyone have any ideas/fixes? If so, please respond. Thank you. Some Other Information: I'm on a HP Pavillion dv7 laptop, 4285 Entertainment PC, with: intel CORE i5 inside, ATI Mobility Radeon Premium Graphics, Microsoft DirectX11 Opening and closing of windows: Defined as opening a program (i.e. Firefox) or closing it by hitting the X in the upper-right hand corner. Lately, the animation for opening and closing windows (which is simply either growing from the icon from the taskbar to fill the screen, or shrinking from the screen down towards the icon on the toolbar.) This problem also occurs for minimizing/maximizing windows. Very laggy movies: defined as .avi movie files saved to My Documents which skips several frames per second and seemingly slows down the movie as a whole Extremely laggy games: I tried RuneScape today, and movement in the game was at least 10x slower than it ever has been, even when playing on the lowest detail/graphics Desktop taking 3 seconds to fade in after sleep: in this scenario, I had no other programs running visibly. The computer generally fades to black from the password screen to the desktop in about 1 second, normally. However, it is now taking 3 or more seconds.

  Read the article

• Strange network issue (ZIP file fails CRC test over VPN)

  - by Joe Schmoe

  We have a server in the office running Windows Server 2003 Our office is connected to our datacenter via hardware VPN (Linksys RV082 router in the office to CISCO router in the datacenter). There is a job that runs on the server in the office that does following: ZIP certain files from the server using 7Zip, copy ZIP file to a network share in the office and verify ZIP integrity, copy ZIP file to a network share in the data center and verify ZIP integrity. Problem is - verifying ZIP integrity for the file in the data center always fails. However, if I run 7Zip on the server in data center that exposes that share ZIP file verifies just fine, so it is not actually corrupted during copy operation. Additionally, I tried running ZIP on other computers in the office to verify ZIP file on datacenter file share and it verifies OK. I tried plugging server to the same network port where my workstation is connected using different cable (my workstation doesn't exhibit this problem) and ZIP verification still fails. So the problem is local to that specific server. On network adapter properties for the server in question there is no "Advanced" tab where one can usually configure a lot of network settings. Network card driver is up to date (Windows Update doesn't find anything newer and Lenovo website doesn't have any drivers for Windows 2003 for this computer model). Is there any other way to configure network setting via command line? What settings could be relevant to this problem?

  Read the article

• How do I disable DirectDraw and Direct3D acceleration on Windows 8? [closed]

  - by Favourite Chigozie Onwuemene

  Some old games that i would really like to play run slowly on some graphic drivers when direct3d acceleration is enabled. I have tried many suggestions but none seems to work. The only thing i have not tried is disabling direct3d acceleration. Is it possible to disable DirectDraw and Direct3D acceleration on my Windows 8 pc? There are certain bad versions of GeForce drivers that cause this problem. This is a problem in the drivers themselves and is unfortunately completely outside our control. The recommended way to fix this problem is to update your graphics card drivers (go to NVIDIA's web site for this). Alternatively, there is a workaround that alleviates or solves the slowdown problem altogether. Try this: Right-click on your desktop and select "Properties". Go to the "Settings" tab and click on "Advanced...". Click on the "Troubleshooting" tab and move the slider to the left until it says that all DirectDraw and Direct3D accelerations have been disabled (around the middle of the range). Finally, click on "OK". Note that this workaround might cause other games on your computer to slow down, so you may have to switch back and forth between settings, but it's certainly worth a try if you can't obtain an updated graphics driver. -source: interactionstudios

  Read the article

• buagent process has been consuming 100% cpu for two days

  - by Maysam

  The buagent process has been using 100% of cpu since two days ago. I want to terminate this process but I don't know if it's something dangerous or not (I am not much advanced in working with linux, indeed I am very beginner). The only thing that I know is that this process is probably restoring some files. But I think it is not normal for that to take more than two days. Now, do you think it would be OK if I kill this process? What command could I use to do that? I appreciate any help :) p.s. We are hosting a few web sites there. This server is also our Name Server and Mail Server as well. A couple of months a go we had a problem with the server which made us to take a full-backup of all files and then reinstall linux. Yesterday, I selected one of the directories on the backup server and restored that directory to a tmp directory on our linux server. After that, I couldn't restore any other directory because every time I want to do that, it says that there is another restore job running and I have to wait for that. When I use the "top" command I can see that the buagent process is consuming 100% of cpu. So I guess that is the problem. I don't know why it has been taking too long to execute.

  Read the article

< Previous Page | 117 118 119 120 121 122 123 124 125 126 127 128  | Next Page >