Search Results

Search found 4335 results on 174 pages for 'wait'.

Page 121/174 | < Previous Page | 117 118 119 120 121 122 123 124 125 126 127 128  | Next Page >

  • Will wear induced by turning computers off in the evening be offset by energy savings?

    - by sharptooth
    I'm asking this here because this is primarily a huge office scenario and administrators will more likely have the answer I'm looking for. Employees' desktop computers can be either left turned on for the whole night or switched off in the evening and turned back on in the morning. The latter will surely save energy. In the same time turning on and off is very harmful for the equipment - hardware often breaks specifically when turned on. Both energy and hardware replacements cost money. With energy it's quite obvious - you pay every month according to what your power meter shows. With hardware replacements it's worse - you need qualified stuff to quickly diagnose the problems and once something breaks the affected employee will have to wait for some time while his computer is fixed/replaced and the data is recovered. So the company has to choose between saving money on energy and saving money on computer maintaince and lost hours. Such decisions must be well though. Is there any detailed study of how turning computers off each evening affects their lifetime?

    Read the article

  • MacBook Pro with OSX 10.6.3 (Snow Leopard) Wi-Fi network connection breaks after few minutes

    - by Yanick Landry
    I have a MacBook Pro with OSX 10.6.3 (Snow Leopard). After connecting on a Wi-Fi network, the connection "breaks" after a few minutes. What I mean by "breaking" is that all requests, whether it is loading a web page, connecting to a share folder, connecting to my local router at 192.168.0.1, or pinging anything doesn't get through (time out). When in a "break" situation, I can see in the Network Settings panel that I still have an active IP, which I can successfully ping. I have this problem at home with a router D-Link DI-624 and at work with a D-Link WBR-2310, all with updated firmwares. I thought DHCP was the issue. So I tried assigning a fixed IP address (192.168.0.166). It successfully connects, but after a few minutes, the connection still breaks. The solution I'm currently using is that I disable the AirPort (on the Network icon menu in the top bar), wait a few seconds then re-enable it. It then quickly works, but the connection still breaks after a few minutes. I tried Googling my problem but I think I can't find any good keywords ! It's my first question here, so sorry if I don't respect some rules.

    Read the article

  • Computer hangs at BIOS screen. Cannot enter setup.

    - by d2jxp
    I have an HP Pavilion a6500f (it's a year out of warranty) and it's hanging on the blue HP BIOS screen. If I mash F10 while it's starting up, it will say "Entering Setup..." but I will see no results. It will hang there and not do anything. If I actually wait until I can see the screen and then hit F10, there's no response at all and the computer will sit at the BIOS menu. I've dusted and cleaned it out, reseated the memory, switched the RAM slots, and reset the CMOS battery using the reset jumper. I'm out of ideas. I'm pretty sure it's not a hard drive issue, since my problem is at the BIOS. After this post, I'll disconnect the hard drive and try to just boot without it. Anyone have any other ideas? Edit: Okay, so I tried disconnecting the hard drive and now I can get back into the BIOS. I reconnected it and I'm locked out again. So the problem is my hard drive.. I guess I should delete this post unless someone has any ideas as to what's wrong with the drive?

    Read the article

  • computer freezes but music continues

    - by Danny
    Recently I have had a problem where my computer will freeze completely but if I happen to be streaming Pandora in a tab that will continue playing. If I wait about 2-5 minutes it will eventually come back and start working normally. I also noticed that during the period that it is unresponsive that the HDD activity light stays lit the whole time, not flashing. I've ran memtest86+ and a diagnostic from Western Digital for my HDD model and none of them reported any errors. The specs for my computer are 1 x ASRock H55M/USB3 R2.0 LGA 1156 Intel H55 HDMI USB 3.0 Micro ATX Intel Motherboard 1 x CORSAIR Enthusiast Series CMPSU-550VX 550W ATX12V V2.2 SLI Ready CrossFire Ready 80 PLUS Certified Active PFC Compatible with Core i7 Power Supply 1 x Intel Core i3-540 Clarkdale 3.06GHz LGA 1156 73W Dual-Core Desktop Processor Intel HD Graphics BX80616I3540 1 x G.SKILL 4GB (2 x 2GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Dual Channel Kit Desktop Memory Model F3-12800CL9D-4GBNQ 1 x ASUS PCE-N13 PCI Express 150/300Mbps Transfer/Receive Rate Wireless Adapter 1 x EVGA 01G-P3-1556-KR GeForce GTX 550 Ti (Fermi) FPB 1GB 192-bit GDDR5 PCI Express 2.0 x16 HDCP Ready SLI Support Video Card I can't imagine what would be causing these problems.

    Read the article

  • IBM WebSphere Host On-Demand (HoD): Cannot run program with "runprogram" command. What can I do?

    - by kokbira
    I access a system that uses an IBM Host on Demand client. I am tryig to create a macro to do a hard task (more than 90,000 keys must be pressed to complete it), but to do it easier I need to call some "external" aplications using "runprogram" tag. But I don't know why it does not function (following IBM help - http://publib.boulder.ibm.com/infocenter/hodhelp/v11r0/index.jsp?topic=/com.ibm.hod.doc/doc/macro/macro.html - did not help...). I am running in Firefox 3.6 and my Java version is jdk1.6.0_20. Below, an example of macro that should function, but didn't. <HAScript name="TEST4" description="" timeout="60000" pausetime="300" promptall="true" blockinput="false" author="wingman" creationdate="05/05/2011 16:14:31" supressclearevents="false" usevars="false" ignorepauseforenhancedtn="true" delayifnotenhancedtn="0" ignorepausetimeforenhancedtn="true"> <vars> <create name="$intReturn$" type="integer" value="0" /> </vars> <screen name="Tela1" entryscreen="true" exitscreen="false" transient="false"> <description > <oia status="NOTINHIBITED" optional="false" invertmatch="false" /> </description> <actions> <runprogram exe= "'c:\\Program Files\\Windows NT\\Accessories\\Wordpad.exe'" param="'c:\\a.txt'" wait="true" assignexitvalue="$intReturn$" /> <message title="" value="'Return value is '+$intReturn$" /> </actions> <nextscreens timeout="0" > </nextscreens> </screen> </HAScript>

    Read the article

  • is there a man in the middle attacking to my server machine?

    - by GongT
    My server works well about half a year. But a strange thing happened (several hours before). This server has two IP-address 58.17.85.19 & 117.21.178.19 When I navigate to http://58.17.85.19, nothing different as before. But http://117.21.178.19 will return a "302 Object moved" and become a "redirect loop" I do some test: ($cmd = "wget http://117.21.178.19/?xx=$RANDOM --max-redirect 0 -S --no-cache -O -") Step by step: run $cmd on my PC and my firend's one (we live in two side of China, far away). - got 302 run $cmd on this server - got 200 OK (content is correct result of index.php) run $cmd on another server in same computer room - got 200 OK telnet from my PC and build an HTTP request (type by hand) - got 200 OK shutdown php-fpm, run $cmd on my PC - got 302 run $cmd on server - 502 Bad Gateway shutdown nginx, run $cmd on both the server and my PC - Connection refused. create iptables rule, refuse any connection to 58.17.85.19:80. run nc -l 80 -k -vvv on server and run $cmd on my PC NC show me that.... Server accept connection (Connection from [my ip]) My connection closed ! (Remove fd xx from list) wget dump out response - got 302 I know that, normaly, NC will accept connection, then dump HTTP request from client, and client will wait for response. this connection will open forever(infact client will close connection becouse timeout), becouse NC can't give any response. So... where my request gone? who send an response to the client? some virus on my server system? If so, why 58.17.85.19 didn't has this error? or... I was attacked by a middleman?

    Read the article

  • Strange File-Server I/O Spikes - What Is Causing This?

    - by CruftRemover
    I am currently having a problem with a small Linux server that is providing file-sharing services to four Windows 7 32-bit clients. The server is an AMD PhenomX3 with two Western Digital 10EADS (1TB) drives, attached to a Gigabyte GA-MA770T-UD3 mainboard and running Ubuntu Server 10.04.1 LTS. The client machines are taking an extremely long time to access/transfer data on the file server. Applications often become non-responsive while trying to open files located remotely, or one program attempting to open a file but having to wait will prevent other software from accessing network resources at all. Other examples include one image taking 20 seconds or more to open, and in one instance a user waited 110 seconds for Microsoft Word 2007 to save a document. I had initially thought the problem was network-related, but this appears not to be the case. All cables and switches have been tested (one cable was replaced) for verification. This was additionally confirmed when closing down all client machines and rebooting the server resulted in the hard-drive light staying on solid during the startup process. For the first 15 minutes during boot, logon and after logging on (with no client machines attached), the system displayed a load average of 4 or higher. Symptoms included waiting several minutes for the logon prompt to appear, and then several minutes for the password prompt to appear after typing in a user name. After logon, it also took upwards of 45 seconds for the 'smartctl' man page to appear after the command 'man smartctl' was issued. After 15 minutes of this behaviour, the load average dropped to around 0.02 and the machine behaved normally. I have also considered that the problem is hard-drive-related, however diagnostic programs reveal no drive problems. Western Digital DLG, Spinrite and SMARTUDM show no abnormal characteristics - the drives are in perfect health as far as the hardware is concerned. I have thus far been completely unable to track down the cause of this problem, so any help is greatly appreciated. Requested Information: Output of 'free' hxxp://pastebin.com/mfsJS8HS (stupid spam filter) The command 'hdparm -d /dev/sda1' reports: HDIO_GET_DMA failed: Inappropriate ioctl for device (the BIOS is set to AHCI - I probably should have mentioned that).

    Read the article

  • SQL - an error occurred during the pre-login handshake

    - by Rivka
    Until yesterday evening, I was able to connect to my server from my local machine. Now, I get the following error: A connection was successfully established with the server, but then an error occurred during the pre-login handshake. (provider: SSL Provider, error: 0 - The wait operation timed out.) (.Net SqlClient Data Provider) Note, I can log on to the actual server with no problem. Yesterday, I installed IIS on my machine and set up a site using my IP address - don't know if this has anything to do. I did come across this article, followed the steps, but didn't seem to help. http://www.escapekeys.com/blog/index.cfm/2011/1/26/Microsoft-SQL-Server-Error-64-A-connection-was-successfully-established-with-the-server I also went through the following article, changed TC/IP settings, restarted, but nothing. http://blog.sqlauthority.com/2009/05/21/sql-server-fix-error-provider-named-pipes-provider-error-40-could-not-open-a-connection-to-sql-server-microsoft-sql-server-error/ Started trying suggestions from comments too but stopped when I realized I might be messing things up more. So, why is this happening / how can I fix?

    Read the article

  • ssh hangs on "Last login" line

    - by Pavel H
    This happened for the first time three days ago - I ssh to the server, authenticate using a password, get the welcome message but it remains hanging on the "Last login:..." line. The command line doesn't show and the server doesn't react to my input. Other services on the server keep working ok (apache, tomcat, database, ..). The box has an out-of-band management using which I was able to restart it. After the restart the ssh worked ok again and I didn't find anything suspicious in the logs. Three days later the same problem occurs on this box again, and newly on yet another server in the cluster - 100% same symptoms. Both servers have about 2 month old installation of Debian Squeeze (6.0.2) and the problem never occurred before despite frequent ssh-ing, so it should not be a problem of settings. We haven't been installing anything new for quite some time now. I also made sure there is enough disk space on both servers. Since it started to happen all of a sudden on two servers at about the same time, I suspect some bug may have been introduced via Debian updates, yet I haven't been able to find anyone with the same problem. Most similar issues I have found: ssh freezes at the "Last Login Line" - in our case everything worked fine until recently, so nothing related to settings should be our problem. Diskspace checked, I couldn't check the memory but I would expect something would be in the logs if the system had been running out of it. Remote Fedora system unresponsive, odd but consistent behavior when trying to log in - problem with high load on the server; unlike in this case, nothing changes even if I wait for 10+ minutes

    Read the article

  • glassfish timeout

    - by Stefano
    Environment: Windows 2008 Server Edition Netbeans 6.7.1 Glassfish 2.1 Apache 2.2.15 for win32 Original problem (almost fixed): The HTTP/1.1 GET method to send data fails if I wait for more than 30 seconds. What I did: I added to the http.conf file of Apache these lines: # # Timeout: The number of seconds before receives and sends time out. # Timeout 9000 # # KeepAlive: Whether or not to allow persistent connections (more than # one request per connection). Set to "Off" to deactivate. # KeepAlive On I went to the Glassfish panel (localhost:4848) and in Configuration HTTP services and I put: Timeout request: 9000 seconds (it was 30) Standby time: -1 (it was 30 seconds) Problem: I am not able to put for glassfish a timeout bigger than 2 minutes to send a GET method. I found this article about glassfish settings, but i'm not able to find WHERE I should put those parameters, and if they could work. Can anybody help try to set this timeout to a higher limit? Maybe it's even a different setting? New tried solution: I went to the glassfish panel control, and to Configuration Subprocesses "Thread-pool-name" and changed the idle timeout from 120 seconds to 1200 seconds. Then I restarted the glassfish service (both from the administrative tools and from asadmin), but still it waits 120 seconds to go idle. I even tried restarting the whole server, still no results. Maybe some setting in postgres? Or the connection of netbeans to postgres through glassfish?

    Read the article

  • How can I automate or script daily downloads for any new anti- virus databases, and then have the program scan my drive?

    - by Macgrimm
    Howdy all Super Users" I humbly ask if any Super User can direct this long time, gray haired Apple Tech in the right direction on this issue. I believe there probably are many ways to skin this cat. But I am looking to find simply the best, most unattended way to get it done. Any help will be greatly appreciated. also (I know there are much better softwares out there for the Mac so please don't go there! The politics of this company dictate which Anti virus we have to use) anyway without any further wait: basically I am trying to automate 2 very important functions of Mc'Afee anti-virus for Mac. First I want to automate the process of retrieving new virus definition files, and second I want to automate the process of scanning for viruses. It turns out that Using Mc'Afee Anti-Virus for the Mac are both manual functions. And they left up to the user (per user account) to perform. Depending on all of about 150 MAc users to perform these 2 tasks themselves is around 65% compliance. My question then is: If I wanted to use the command line such as (open /Applications/McAfee\ Security.app) It will open up the Security Console. But how can I make command Mc'Afee go out and grab the definition files and scan the computer? I have to admit I am at a crossroad and Macaltimers has set in. I would really appreciate it if any of you "Super ~ Users" can help me out with this MacAltimers loss of how to what to do. Thanks to All up Front Macgrimm

    Read the article

  • sql server 2005 instance unresponsive and all db's are 'in recovery'

    - by user44650
    we've got a sql server 2005 instance that one of our guys messed up, i believe they killed the sql server service and restarted the computer, and when it came back all of our databases are "in recovery" and it times out every time we try to connect to it. it's been 'in recovery'and unable to connect to 'msbd' (also in recovery) whenever we try to use SSMC, for the last 4 days now. i'm unsure how to use the DBCC CHECKDB command to check the db integrity. we have backups(which we can't recover from because it keeps timing out), and it's a testing server, so nothing in production is really lost. is there any way to get it out of recovery mode? we have another sqlserver instance running that's just fine, but this instance keeps timing out. the errors i keep seeing are database msdb is being recovered. wait until recovery is finished and an exception occurred while executing a transact-sql statement or batch Timeout expired. any thoughts? we don't really have a DBA here, or anyone with much sql experience.

    Read the article

  • Heavy write to Galera cluster - table locked, cluster practically unusable

    - by Joe
    I set up Galera Cluster on 3 nodes. It works perfectly for reading data. I have done simple application to make some test on the cluster. Unfortunately I have to say that the Cluster fails totally when I try to do some writing. Maybe it can be configured differently or I do sth wrong? I have a simple stored procedure: CREATE PROCEDURE testproc(IN p_idWorker INTEGER) BEGIN DECLARE t_id INT DEFAULT -1; DECLARE t_counter INT ; UPDATE test SET idWorker = p_idWorker WHERE counter = 0 AND idWorker IS NULL limit 1; SELECT id FROM test WHERE idWorker = p_idWorker LIMIT 1 INTO t_id; SELECT ABS(MAX(counter)/MIN(counter)) FROM TEST INTO t_counter; SELECT COUNT(*) FROM test WHERE counter = 0 INTO t_counter; IF t_id >= 0 THEN UPDATE test SET counter = counter + 1 WHERE id = t_id; UPDATE test SET idWorker = NULL WHERE id = t_id; SELECT t_counter AS res; ELSE SELECT 'end' AS res; END IF; END $$ Now my simple C# application creates for example 3 MySQL clients in separate threads and each one executes the procedure every 100ms until there is no record where column 'counter' = 0. Unfortunately - after about 10 seconds sth is going bad. On servers there is process 'query_end' that never ends. After that - you cannot make update on the test table, MySQL returns: ERROR 1205 (HY000): Lock wait timeout exceeded; try restarting transaction . You cant even restart mysql. What you can do is to restart server, sometimes whole cluster. Is Galera Cluster so unreliable when you do massive concucurrent writing/updates? Hard to believe.

    Read the article

  • 2012 R2 services will not start after promotion to Domain Controller

    - by Cybersylum
    Having a peculiar issue promoting a Windows 2012 R2 server in a domain at 2003 domain/forest functional level. Built a new 2012 R2 server, added the following software (labtech, appassure, eset A/V, & Teamviewer). It activated and appeared to be working fine. I added the Active Directory Domain Services role, and completed the configuration (Domain/Forest Prep, and DC promotion). All appeared to go well. I rebooted the server, and that's where the peculiar stuff began. I noticed the server indicated it needed activated again; but would not accept the key. I verified the key was good. That's when I noticed the Software Protection service (as well as many other core services - Base Filtering engine, DHCP client, firewall, etc) would not start. The error message for all of them was "Access Denied". I called MS, and they wanted to troubleshoot at a service level. Their fix was to use procmon and identify the resource that needed permissions (registry key, file or folder) and add "everyone" with full control). That got the services to start; but the problem re-appeared after a reboot. Thinking the issue might have been with the anti-virus package during the promotion process, I rebuilt the DCs from scratch and removed the metadata from AD (as I could not demote the machines "rpc server unavailble"). I tried to promote the newly built machines again. The only changes to the brand new machines being critical updates. Again the promotion appeared to work fine; but upon reboot (and a long wait to allow replication to occur) similar problems began to re-appear. I have verified that the schema updates are correct (schema version is 69 - for Windows 2012 R2). I am not finding much about this issue through my own searches, so I thought I would post this to see if anyone else has seen anything similar...

    Read the article

  • Something like Dropbox for local use

    - by Casper
    I am looking for a solution to sync folder pairs between a NAS and multiple local macs. Each of the macs could edit files and the other macs should then get synced automatically. Basically my own local version of Dropbox without using "cloud-storage". I have looked into solutions using rsync. As I understand it rsync is not really capable of doing a bi-directional sync. I also do not want to necessarily invoke the sync process. I would prefer a daemon running in the background - waiting and checking for changes and then syncing them "live". The program should also be flexible enough to recognize that it sometimes (in the case with laptops) can not reach the NAS. It should then just wait for the connection to be back again, without bugging me ever few minutes. I have looked into synk, folderwatch, rsync and a few others, but I haven't really found a solution. Isn't there something like "offline folders" from microsoft for the mac? Thanks PS: just for clarification - I don't want to sync for backup purposes, instead I am wanting to sync so that all macs have a local copy of the most recent changes to files.

    Read the article

  • WINDOWS: Your computer hangs. You can windows + R (run dialog) but performance is so halted taskMGR

    - by John Sullivan
    The question is, what process are available to try to recover from total system instability before pulling the plug when we can do nothing but programs or batches in the path from the run dialog (windows + r key), and performance is so dead that taskMGR / procEXP / other programs with visual guis are not usable? I am not a windows expert, but ideally someone out there has written a program that does more or less stuff like this: Immediately set (or perhaps I can set from the run prompt) its priority to extremely high, evaluate performance bottlenecks. E.g. is CPU 100%? If so identify offending program(s) or problems. Attempt / log fixes, then provide crude feedback asking the user if his performance has stabilized enough to abort, wait a few seconds, if no feedback continue, etc. etc. Eventually try to do any "system cleanup" if the program decides it cannot recover and perhaps finally provide a series of beeps to the user, or what have you, to say "OK, I give up, time to pull the plug". Ideally create a log, when able. These kinds of horrible hangs are a situation where surely trying something, anything, is better than nothing -- as long as that something is intelligent -- when the alternative is ripping out the power coord. Again, I am not a windows expert, so perhaps there is a much more elegant "hands on" approach I am not aware of.

    Read the article

  • Static IP addressing issue in Ubuntu on BeagleBoneBlack Rev C

    - by Stringfellow
    I have my BBB configured to use a static IP address using the following in the file /etc/network/interfaces: allow-hotplug eth0 iface eth0 inet static address 192.168.0.1 netmask 255.255.255.0 network 192.168.0.0 This seems to work ok on boot, but when the ethernet cable is unplugged and then plugged back in, I lose the IP address. Any ideas what's going on here? Another weird symptom: If I boot the BBB with the network cable unplugged, but the switch it's plugged into off, I'll get my static IP. But, when I turn the switch on, I'll get a DHCP-assigned address. This is even though I have it configured with a static IP address. One last thing. If I ifdown etho, the interface will be gone when I do an ifconfig. If I wait a few seconds, though, and then re-run ifconfig, it will reappear, without an IP address. (Before I disabled IPv6, I used to get a IPv4 DHCP address in this case... weird). When that happens, I get a message like this in /var/log/messages: Apr 23 20:32:06 beaglebone kernel: [ 737.170172] libphy: 4a101000.mdio:00 - Link is Up - 100/Full Apr 23 20:32:06 beaglebone kernel: [ 737.170304] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Here's my uname -a: root@beaglebone:/etc# uname -a Linux beaglebone 3.8.13-bone47 #1 SMP Fri Apr 11 01:36:09 UTC 2014 armv7l GNU/Linux Any ideas what's going on here?

    Read the article

  • Connecting to a subdomain severs the connection to the domain itself. What's going on?

    - by TheAgent
    Hi all. We have a website on a third-party server (server leased and shared with other websites) and the server provides access to our SQL Server database through a subdomain in the form of mssql.DomainName.com. I was told to use SQL Management Studio Express to connect to this subdomain in order to manage the database. After a few tries and getting many "Timeout" messages, I finally manage to connect to the server; everything's fine. But now I can't connect to DomainName.com anymore. Trying to browse DomainName.com using Firefox, it tries to "lookup" DomainName.com address and fails, telling me "the server was not found". I have to disconnect Management Studio from the server and wait a couple of hour for DomainName.com to become available again, and after that, trying to reconnect to the SQL Server again repeats the scenario. While I can't browse DomainName.com directly, I can use a proxy to connect to it, meaning that the problem is somehow related to a DNS my computer tries to ask to translate the name to the corresponding IP. Anyone seen anything like this before? Any ideas? Thanks in advance.

    Read the article

  • Windows 7 boot animation slows down startup by default?

    - by kngofwrld
    I just upgraded my HDD to an SSD drive. I am running a completely fresh install and enjoy the short boot time. I tweaked the startup to be as fast as I could by removing unneeded apps and such. Nor am I running a solid desktop background (which causes a 30-sec startup delay). I have a 2.1ghz 64 bit laptop with 4 gigs of ram, so it's not a liquid-cooled speed monster, but I checked some super high end PC boot vids on YouTube and noticed that they startup in almost the same time as my machine. I also noticed that the glowing Windows 7 animation plays all the way no matter how fast the PC is. I turned off the animation, and the startup time is unchanged. I turned on verbose startup info and noticed that it runs until the very end, where it looks like it just sits there for no reason waiting for something to happen for a few seconds. So now I think that the Windows 7 startup animation has a timer built into it that forces the computer to wait for no other reason than to play the full animation. Super-fast XP boot vids on YouTube seem to start much faster (and not just because they "have less to load"). Am I imagining things? My question is: How can I turn off not just the animation, but the timer for the animation. Here is a vid that tipped me off, I have no relation to the poster. (warning: soundtrack might be loud) http://www.youtube.com/watch?v=T5LkX3xejJ4

    Read the article

  • How to delete removed devices from a mdadm RAID1?

    - by Kabuto
    I had to replace two hard drives in my RAID1. After adding the two new partitions the old ones are still showing up as removed while the new ones are only added as spare. I've had no luck removing the partitions marked as removed. Here's the RAID in question. Note the two devices (0 and 1) with state removed. $ mdadm --detail /dev/md1 mdadm: metadata format 00.90 unknown, ignored. mdadm: metadata format 00.90 unknown, ignored. /dev/md1: Version : 00.90 Creation Time : Thu May 20 12:32:25 2010 Raid Level : raid1 Array Size : 1454645504 (1387.26 GiB 1489.56 GB) Used Dev Size : 1454645504 (1387.26 GiB 1489.56 GB) Raid Devices : 3 Total Devices : 3 Preferred Minor : 1 Persistence : Superblock is persistent Update Time : Tue Nov 12 21:30:39 2013 State : clean, degraded Active Devices : 1 Working Devices : 3 Failed Devices : 0 Spare Devices : 2 UUID : 10d7d9be:a8a50b8e:788182fa:2238f1e4 Events : 0.8717546 Number Major Minor RaidDevice State 0 0 0 0 removed 1 0 0 1 removed 2 8 34 2 active sync /dev/sdc2 3 8 18 - spare /dev/sdb2 4 8 2 - spare /dev/sda2 How do I get rid of these devices and add the new partitions as active RAID devices? Update I seem to have gotten rid of them. My RAID is resyncing, but the two drives are still marked as spares and are number 3 and 4, which looks wrong. I'll have to wait for the resync to finish. All I did was to fix the metadata error by editing my mdadm.conf and rebooting. I tried rebooting before, but this time it worked for whatever reason. Number Major Minor RaidDevice State 3 8 2 0 spare rebuilding /dev/sda2 4 8 18 1 spare rebuilding /dev/sdb2 2 8 34 2 active sync /dev/sdc2

    Read the article

  • How to redirect or rewrite IIS site with port in URL to URL without port?

    - by user2573690
    I'm not 100% sure if this is the right part of StackOverflow to post this but to me it made the most sense. Sorry if its not! Currently I have a site in IIS configured on HTTPS with port 7500. I can access this site by using the URL: https://portal.company.com:7500. What I would like to do is remove the port number at the end of the URL so users can access this site using https://portal.company.com... I am a complete beginner with IIS, but what I have tried is the HTTP Redirect, which if I used on this IIS site, would redirect a user that hits portal.company.com:7500 to some other site, which is not what I need. Another thing I have though about is creating another IIS site which serves the purpose of being at the URL portal.company.com and when its hit, it redirects to my portal.company.com:7500, but I don't know if this is the best approach. So my question is, what are my options for achieving the behavior mentioned above and what is the best/recommended approach? I haven't played with URL Rewriting before but I will look into that now while I wait for a reply. Thanks!! Using IIS Manager on a Windows Server 2008 machine.

    Read the article

  • Amazon EC2 - Free memory

    - by Damo
    We have an amazon ec2 small instance running and over the past few days we noticed that the memory is going down and down. On the small instance, we are running apache and tomcat6 Tomcat is started with the following JVM parameters -Xms32m -Xmx128m -XX:PermSize=128m -XX:MaxPermSize=256m We use nagios to monitor stuff like updates to apply, free disk space and memory. Everything else is behaving as expected but our memory is going down all the time. Our app receives approx half a million hits a day When I shutdown apache and tomcat, and ran free -m, we had only 594mb of memory free out out of the 1.7gb of memory. Not much else is running on the small instance and when running the top command I cannot see where the memory is going. The app we run on tomcat is a grails webapp. Could there be a possibility that there is a memory leak within our application? I read online and folks say that a small amazon instance is perfect for running apach and tomcat. I found a few posts online that showed how to setup apache and tomcat to limit the memory usage and I have already performed those steps. The memory is not being used up as quick but the memory is still decreasing over time. We have other amazone ec2 small instances running grails apps and the memory is fairly standard on those nodes. But they would not be receiving as much traffic Just to add, when I run the top command on the problem server, I cannot see where all the memory is being used Any help with this is greatly appreciated The output of free -m when run on my server is as follows total used free shared buffers cached Mem: 1657 1380 277 0 158 773 -/+ buffers/cache: 447 1209 Swap: 895 0 895 In your opinion, does this look ok? At what stage would the OS give back memory, would it wait to the memory reaches 0% or is this OS dependent?

    Read the article

  • Internet compression proxy for low speed broadband?

    - by user23150
    I live in a rural location, using high-latency wireless off a local ISP's tower. My speed tests vary day to day, but I can get around 1Mb up/down. The problem is, I work with large files, uploading and downloading (HD videos, development software, etc.). It can be painful to wait sometimes. Plus I do some side contract game development, and it can be very difficult to playtest with other developers (200ms ping is a good day for me). Now, obviously it's not going to be easy to solve the latency problem without different wireless hardware. But speedwise, I am wondering if I can use some kind of compression technology on a proxy. For instance, my work computer has full access to a 26Mb down, 10Mb up connection, that is totally unused at night and the weekends. If I could run some kind of compression technology on our server, and use it as a proxy to route to my home computer, I could stand to gain some major speed. I realize that by bogging down a system with compression, I could potentially lose whatever speed gain I had. But the proxy server is a quad core xeon, and the receiving computer is a pretty decent i7 computer, so that shouldn't be a concern. I found http://toonel.net/ but it seems more geared toward very slow narrowband users, like dial-up. Plus, I would prefer to just be able to point my browser to a proxy server, rather then install software on my client machine. EDIT I thought about my question a little more, and realize I am going to need to install software on my client in order to decompress, and possible compress (for uploading). That's not a huge deal.

    Read the article

  • Log backups "stalling" on SQL 2008?

    - by MattK
    I have interited a box running SQL Server 2008 and Windows 2003, and have had a few events where largeish (35GB) log backups "stall", both before and after the installation of SQL 2008 SP1. The server log ships to a standby, so regular log backups are taken at 15 minute intervals. However, after an index reorg causes the log to grow to about 35GB (on a DB with about 17GB of data), the next log backup runs to ~95% completion, then seems to stop. The process shows as suspended, with a wait state of BACKUPIO. CPU, read, and write activity on the SPID also does not change, and the process stays in this state for hours, when normally a backup of this size should complete in about 20 minutes. This server has a single RAID-1 volume, thus the source database files and destination backup files are on the same volume. However, I cannot determine if another process is blocking the backup. The backup SPID cannot be killed, and the only way to terminate the log backup and clear the lock on the backup file is to cycle the SQL Server service. There was one event where the backup terminated completely, with an error that another process had locked the backup file, but no details about what that process was. Can anyone suggest a cause or diagnostic process to this situation?

    Read the article

  • SQL Server log backups “stalling”

    - by MattK
    I have interited a box running SQL Server 2008 and Windows 2003, and have had a few events where largeish (35GB) log backups "stall", both before and after the installation of SQL 2008 SP1. The server log ships to a standby, so regular log backups are taken at 15 minute intervals. However, after an index reorg causes the log to grow to about 35GB (on a DB with about 17GB of data), the next log backup runs to ~95% completion, then seems to stop. The process shows as suspended, with a wait state of BACKUPIO. CPU, read, and write activity on the SPID also does not change, and the process stays in this state for hours, when normally a backup of this size should complete in about 20 minutes. This server has a single RAID-1 volume, thus the source database files and destination backup files are on the same volume. However, I cannot determine if another process is blocking the backup. The backup SPID cannot be killed, and the only way to terminate the log backup and clear the lock on the backup file is to cycle the SQL Server service. There was one event where the backup terminated completely, with an error that another process had locked the backup file, but no details about what that process was. Can anyone suggest a cause or diagnostic process to this situation?

    Read the article

< Previous Page | 117 118 119 120 121 122 123 124 125 126 127 128  | Next Page >