Search Results

Search found 68566 results on 2743 pages for 'rich internet application'.

Page 124/2743 | < Previous Page | 120 121 122 123 124 125 126 127 128 129 130 131  | Next Page >

• cannot connect to vpn server (error 721)

  - by callmeblessed

  I got 2 internet connections in my computer. One is using 3.5G HSDPA modem (vodafone huawei e220) and the other using mobile phone (cdma zte c261). Both are using different ISP and i have both. at the moment, i can connect to my office vpn using the HSDPA modem one. But when i tried to use cdma modem (dial up - mobile phone modem), i am just able to get "verifying username and password" and then after a few minutes it display error : Error 721 The Remote Computer didn't respond. I tried to ping into my office ip address, it got good result but still cannot connect to the vpn. I tried to turn off all my firewall (i'm using commodo) and has no response as well. In my cdma mobile phone modem Network connections I tried to allow iNternet connection sharing as well ... and turn on all Internet Protocol TCP/IP, File & Printer Sharing & Client for microsoft networks. But all of my effort has no effect. How to fix this problem ? note: my office using windows vpn as well. thank you .

  Read the article

• Printing to a remote printer through the internet

  - by Lock

  I have a remote network (A) that is connected to a head office (B) through a private network. Network A only has 1 PC that requires the connection, and this is into a terminal server at network B. We want to save money by getting rid of the private network as only 1 PC now access it and it seems silly to pay ~$400 per month for something that is accessed by 1 PC. A VPN tunnel is out of the question as the provider wants to charge $600 a month for a VPN tunnel (more than a private network? I might get them to check these numbers). I was thinking of 2 options: 1) VPN client on the PC. This wouldn't cost a thing as we already have VPN users available. 2) Open up a port on the firewall of network B, forwarding to the terminal server. Now the problem is this: On the terminal server, the program that is accessed is for printing labels to the printer that is at network A. The program is setup to send all print jobs to a printer that is setup locally on the terminal server, which has its port mapped to the IP address of the printer that is at network A. If we got rid of the VPN tunnel and used clients/open up firewall port, the printer would no longer be able to find network A, and hence printing would not work. Any ideas to combat this issue? Can the printers at the remote network be setup as internet printers? I've never had any experience with internet printers. Can you open up ports and map to a public static IP address?

  Read the article

• Very strange networking problem in all computers in my house

  - by Anthony

  I have three computers in my house: One desktop (wired), and two laptops (wireless). I'm using Cox Communications (yes they suck), and yesterday they had a major outage. I know it was them because I called them up when I started losing connection to the internet. All the computers can connect just fine, but they don't have internet access. It just says "local only". The weird thing is, some of them work occasionally. For the first day my laptop was working perfectly, while all the other computers couldn't connect. Later on in the day it got reversed, and the desktop was the one with internet access. By the second day the problem on Cox's end was fixed, but we still had no access. I called them up and they reset my modem, and did the usual troubleshooting stuff. It never fixed the problem, but we found out that the problem had to do with conflicting IP addresses. My router was a Linksys WRT54G and it was about 5 years old. I figured it might have gotten damaged from the outage since it was so old, and now it's having trouble "fixing itself" and giving out the proper IP addresses. So I bought a new router, a Cisco Linksys E1000. I set everything up, and still the same problem. My computer has access right now (that's how I'm writing this), but no other computers seem to be able to get access. Is there possible damage to the modem? Can someone help me please? Sorry for this being so long.

  Read the article

• In an application, are there multiple permissions that acess internet?

  - by user164945

  In an application, are there multiple permissions that acess internet? Could only part of an application be denied a certain permission, such as internet? Could only the part of the application that is spyware be denied internet permissions, Such as through modifying the files that connect to the internet? spyware X no internet acess (internet) (read) (write) (sound or harware) | permission 1 | permission 2 | permission 3 | permission 4 |

  Read the article

• Application Event Log keeps getting corrupted

  - by yakatz

  I recently asked about repairing a corrupt event log, because it seemed to be a one-off event. The event log has since exhibited the same behavior 3 times. We have been trying to find patterns, but so far we have found nothing. The server runs several ASP.NET applications and three scheduled tasks written in .NET. The last modified date of the event log once happened to be the same time as one of the scheduled tasks, but the others have not been. Any suggestions of where to look next or a way we can get any information out of a corrupt evtx file? The server is running critical e-commerce applications, so we want to keep the number of restarts required to a minimum. Edit: I ran DUMPEL and got very strange results. 1/9/2012 4:14:05 PM 1 100 1000 Application Error N/A SERVERNAME Faulting application name: w3wp.exe, version: 7.5.7601.17514, time stamp: 0x4ce7a5f8 Faulting module name: ntdll.dll, version: 6.1.7601.17514, time stamp: 0x4ce7ba58 Exception code: 0xc0000374 Fault offset: 0x000ce653 Faulting process id: 0x1070 Faulting application start time: 0x01cccf1386d30991 Faulting application path: C:\Windows\SysWOW64\inetsrv\w3wp.exe Faulting module path: C:\Windows\SysWOW64\ntdll.dll Report Id: dbf4f691-3b06-11e1-9025-005056a602e6 1/9/2012 4:14:07 PM 4 0 1001 Windows Error Reporting N/A SERVERNAME Fault bucket , type 0 Event Name: APPCRASH Response: Not available Cab Id: 0 Problem signature: P1: w3wp.exe P2: 7.5.7601.17514 P3: 4ce7a5f8 P4: StackHash_79d9 P5: 6.1.7601.17514 P6: 4ce7ba58 P7: c0000374 P8: 000ce653 P9: P10: Attached files: C:\Windows\Temp\WER975.tmp.appcompat.txt C:\Windows\Temp\WERA03.tmp.WERInternalMetadata.xml C:\Windows\Temp\WERA13.tmp.hdmp C:\Windows\Temp\WERD21.tmp.mdmp These files may be available here: C:\ProgramData\Microsoft\Windows\WER\ReportQueue\AppCrash_w3wp.exe_cd7d09dfc84119d82a2ac6a789038bd5661acfb_cab_128f0e67 Analysis symbol: Rechecking for solution: 0 Report Id: dbf4f691-3b06-11e1-9025-005056a602e6 Report Status: 4 1/9/2012 4:14:07 PM 4 0 1001 Windows Error Reporting N/A SERVERNAME Fault bucket , type 0 Event Name: APPCRASH Response: Not available Cab Id: 0 Problem signature: P1: w3wp.exe P2: 7.5.7601.17514 P3: 4ce7a5f8 P4: StackHash_79d9 P5: 6.1.7601.17514 P6: 4ce7ba58 P7: c0000374 P8: 000ce653 P9: P10: Attached files: C:\Windows\Temp\WER975.tmp.appcompat.txt C:\Windows\Temp\WERA03.tmp.WERInternalMetadata.xml C:\Windows\Temp\WERA13.tmp.hdmp C:\Windows\Temp\WERD21.tmp.mdmp These files may be available here: C:\ProgramData\Microsoft\Windows\WER\ReportQueue\AppCrash_w3wp.exe_cd7d09dfc84119d82a2ac6a789038bd5661acfb_cab_128f0e67 Analysis symbol: Rechecking for solution: 0 Report Id: dbf4f691-3b06-11e1-9025-005056a602e6 Report Status: 0 1/9/2012 4:14:12 PM 1 100 1000 Application Error N/A SERVERNAME Faulting application name: w3wp.exe, version: 7.5.7601.17514, time stamp: 0x4ce7a5f8 Faulting module name: ntdll.dll, version: 6.1.7601.17514, time stamp: 0x4ce7ba58 Exception code: 0xc0000374 Fault offset: 0x000ce653 Faulting process id: 0x16ac Faulting application start time: 0x01cccf139f475c0c Faulting application path: C:\Windows\SysWOW64\inetsrv\w3wp.exe Faulting module path: C:\Windows\SysWOW64\ntdll.dll Report Id: e03bae70-3b06-11e1-9025-005056a602e6 1/9/2012 4:14:16 PM 4 0 1001 Windows Error Reporting N/A SERVERNAME Fault bucket , type 0 Event Name: APPCRASH Response: Not available Cab Id: 0 Problem signature: P1: w3wp.exe P2: 7.5.7601.17514 P3: 4ce7a5f8 P4: StackHash_9c6c P5: 6.1.7601.17514 P6: 4ce7ba58 P7: c0000374 P8: 000ce653 P9: P10: Attached files: C:\Windows\Temp\WER2579.tmp.appcompat.txt C:\Windows\Temp\WER25F7.tmp.WERInternalMetadata.xml C:\Windows\Temp\WER25F8.tmp.hdmp C:\Windows\Temp\WER28F6.tmp.mdmp These files may be available here: C:\ProgramData\Microsoft\Windows\WER\ReportQueue\AppCrash_w3wp.exe_c49a67649524ad11b64bbf809211bc5ba742a3d6_cab_0b63321b Analysis symbol: Rechecking for solution: 0 Report Id: e03bae70-3b06-11e1-9025-005056a602e6 Report Status: 4 1/9/2012 4:14:16 PM 4 0 1001 Windows Error Reporting N/A SERVERNAME Fault bucket , type 0 Event Name: APPCRASH Response: Not available Cab Id: 0 Problem signature: P1: w3wp.exe P2: 7.5.7601.17514 P3: 4ce7a5f8 P4: StackHash_9c6c P5: 6.1.7601.17514 P6: 4ce7ba58 P7: c0000374 P8: 000ce653 P9: P10: Attached files: C:\Windows\Temp\WER2579.tmp.appcompat.txt C:\Windows\Temp\WER25F7.tmp.WERInternalMetadata.xml C:\Windows\Temp\WER25F8.tmp.hdmp C:\Windows\Temp\WER28F6.tmp.mdmp These files may be available here: C:\ProgramData\Microsoft\Windows\WER\ReportQueue\AppCrash_w3wp.exe_c49a67649524ad11b64bbf809211bc5ba742a3d6_cab_0b63321b Analysis symbol: Rechecking for solution: 0 Report Id: e03bae70-3b06-11e1-9025-005056a602e6 Report Status: 0 1/9/2012 4:14:21 PM 1 100 1000 Application Error N/A SERVERNAME Faulting application name: w3wp.exe, version: 7.5.7601.17514, time stamp: 0x4ce7a5f8 Faulting module name: ntdll.dll, version: 6.1.7601.17514, time stamp: 0x4ce7ba58 Exception code: 0xc0000374 Fault offset: 0x000ce653 Faulting process id: 0x17f8 Faulting application start time: 0x01cccf13a4ba5126 Faulting application path: C:\Windows\SysWOW64\inetsrv\w3wp.exe Faulting module path: C:\Windows\SysWOW64\ntdll.dll Report Id: e57a0a85-3b06-11e1-9025-005056a602e6 1/9/2012 4:14:21 PM 4 0 1001 Windows Error Reporting N/A SERVERNAME Fault bucket , type 0 Event Name: APPCRASH Response: Not available Cab Id: 0 Problem signature: P1: w3wp.exe P2: 7.5.7601.17514 P3: 4ce7a5f8 P4: StackHash_9c6c P5: 6.1.7601.17514 P6: 4ce7ba58 P7: c0000374 P8: 000ce653 P9: P10: Attached files: These files may be available here: C:\ProgramData\Microsoft\Windows\WER\ReportQueue\AppCrash_w3wp.exe_c49a67649524ad11b64bbf809211bc5ba742a3d6_1cfb4872 Analysis symbol: Rechecking for solution: 0 Report Id: e57a0a85-3b06-11e1-9025-005056a602e6 Report Status: 4 1/9/2012 4:14:21 PM 4 0 1001 Windows Error Reporting N/A SERVERNAME Fault bucket , type 0 Event Name: APPCRASH Response: Not available Cab Id: 0 Problem signature: P1: w3wp.exe P2: 7.5.7601.17514 P3: 4ce7a5f8 P4: StackHash_9c6c P5: 6.1.7601.17514 P6: 4ce7ba58 P7: c0000374 P8: 000ce653 P9: P10: Attached files: These files may be available here: C:\ProgramData\Microsoft\Windows\WER\ReportQueue\AppCrash_w3wp.exe_c49a67649524ad11b64bbf809211bc5ba742a3d6_1cfb4872 Analysis symbol: Rechecking for solution: 0 Report Id: e57a0a85-3b06-11e1-9025-005056a602e6 Report Status: 0 None of the files referenced actually exist (not even in WER ReportArchive). These should not be the only events mentioned. The log file has been cleared twice since January 9, so those events should not even be listed at all.

  Read the article

• Proxy Settings per Machine not working on windows server 2008 R2 SP1

  - by Anirudh Goel

  i have a very interesting problem and would appreciate any help for it. In my scenario i have scripts which bring up a VM inside a domain. Now i want to enable internet access for all the VM's and they go through a proxy. I interact with the VM's using remote sessions and use the credentials of a user which belogs to the domain administrator group. Now problem is that, i create VM's on the fly and destroy them as well,and the scripts i run during their lifetime require internet access on them.So i cannot statically set the proxy settings thus i used the option of Active Directory Group Policy Management. I initially used the "User Configuration" option and set the proxy, which worked like a charm when ever i log inside the machine. However it doesn't work if i use to remote login to the machine with an account which has not yet logged in to the machine. So i used this link to configure it to work on Per Machine, the group policy has worked fine and it reflects in the browser too. But i am not able to resolve any dns name like http://www.google.com or any internet based site. Any idea what i can do?

  Read the article

• Debian can't connect to internet using LAN

  - by tampe125

  I have a headless Raspberry Pi using Debian Wheezy. I have a wifi dongle and if I connect my Raspberry using it, everything works fine: I can connect to the Internet, I can ping, I can update. However, if I get down my wifi and set up the lan interface, I lost my internet connection. I still can connect locally, using my laptop, but the connection doesn't exit (ie ping is not working). Some useful info: cat /etc/network/interfaces auto lo auto eth0 iface eth0 inet static address 192.168.0.105 netmask 255.255.255.0 gateway 192.168.0.1 ping www.google.com (nothing request timed out) ifconfig eth0 Link encap:Ethernet HWaddr b8:27:eb:a2:b5:20 inet addr:192.168.0.105 Bcast:192.168.0.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1130 errors:0 dropped:0 overruns:0 frame:0 TX packets:1116 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:97223 (94.9 KiB) TX bytes:146140 (142.7 KiB) ping 192.168.0.1 PING 192.168.0.1 (192.168.0.1) 56(84) bytes of data. ^C --- 192.168.0.1 ping statistics --- 19 packets transmitted, 0 received, 100% packet loss, time 18007ms cat /etc/resolv.conf nameserver 8.8.8.8 netstat -r Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface default 192.168.0.1 0.0.0.0 UG 0 0 0 eth0 192.168.0.0 * 255.255.255.0 U 0 0 0 eth0 well, I think that's all... Any ideas?

  Read the article

• Debian can't connect to internet using LAN

  - by tampe125

  I have a headless Raspberry Pi using Debian Wheezy. I have a wifi dongle and if I connect my Raspberry using it, everything works fine: I can connect to the Internet, I can ping, I can update. However, if I get down my wifi and set up the lan interface, I lost my internet connection. I still can connect to it locally, using my laptop, but the connection doesn't exit (ie ping is not working). Some useful info: cat /etc/network/interfaces auto lo auto eth0 iface eth0 inet static address 192.168.0.105 netmask 255.255.255.0 gateway 192.168.0.1 ping www.google.com (nothing request timed out) ifconfig eth0 Link encap:Ethernet HWaddr b8:27:eb:a2:b5:20 inet addr:192.168.0.105 Bcast:192.168.0.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1130 errors:0 dropped:0 overruns:0 frame:0 TX packets:1116 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:97223 (94.9 KiB) TX bytes:146140 (142.7 KiB) ping 192.168.0.1 PING 192.168.0.1 (192.168.0.1) 56(84) bytes of data. ^C --- 192.168.0.1 ping statistics --- 19 packets transmitted, 0 received, 100% packet loss, time 18007ms cat /etc/resolv.conf nameserver 8.8.8.8 netstat -r Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface default 192.168.0.1 0.0.0.0 UG 0 0 0 eth0 192.168.0.0 * 255.255.255.0 U 0 0 0 eth0 well, I think that's all... Any ideas?

  Read the article

• Software/hardware to build video streaming server?

  - by Sasha Yanovets

  I am looking for a video streaming server solution, something like online TV server, with ability to make live broadcasts in the internet. What software could you recommend for that? What kind of hardware it should run on, should be there anything special? I am looking for a solution that could be scaled up to at least 1000 simultaneous users online with good resolution of video. I think it is good to have general answer on what direction to choose. But here more details on my specific case: I just looking for a solution almost from scratch. We have some video content that we've produced, but it is not delivered over internet yet. We do not tied to any particular vendor for now. We want to make 24 hours of steaming three 8 hour blocks with change of content every day. We want the ability to make regular live broadcasts. I guess we will need to have several options of streaming quality (low ~56 kb/s mid ~273 kb/s). Some terms just foreign to me (like play-truncation rate), if you could point out what parameters we should avare of, it would be great. Uplink to the internet is to be determined. We plan to start from something and scale up on the way. If you are already have some kind of media streaming server, just describe its configuration here (hardware, OS, software), peak number of concurrent users it serves. I think it could help people approaching this task.

  Read the article

• Ubuntu - No gnome-panels, no right-click, no internet, no hotkeys

  - by Darthfett

  Hey guys, I've been using Ubuntu (Maverick 10.10) on my desktop (ATI Radeon 5830) for about 3 weeks now, but all of a sudden I am unable to even use my computer. As soon as I start up, I see my desktop, with icons, but I don't see any gnome-panels, and I'm unable to get any options if I right-click. I can start programs by double clicking them. I also cannot get an internet connection. I've tried restarting gnome-panel by killing it, using Ctrl+Alt+5 to switch to a terminal (I don't have a shortcut to one on my desktop, and no hotkeys will work), but no luck. Restarting my computer has no effect upon this (I have to manually cut the power, since I don't know the terminal command). As far as I know, I have not made any changes, and I've never had any problems in the past. This started when I was playing Minecraft, but my internet crapped out, and no amount of re-trying the connection would work. I know it was my computer, as my brother's was working fine in the other room. Any clues as to what's going on? I'm more than willing to troubleshoot.

  Read the article

• IP routing Solaris 9 access the internet from local network

  - by help_me

  I am trying to configure the NICS on the Solaris Sparc server. My problem lies in getting out to the "Internet" from the local network. I have requested the NIC to receive a DHCP server address #ifconfig -interface dhcp start. If anyone could guide me as to what I need to do next. I am not able to ping 4.2.2.2 or access the internet. Much appreciated, thank you #uname -a SunOS dev 5.9 Generic_122300-59 sun4u sparc SUNW,Sun-Fire-V210 ifconfig -a lo0: flags=1000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4> mtu 8232 index 1 inet 127.0.0.1 netmask ff000000 bge0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2 inet 10.100.0.3 netmask ffffc000 broadcast 10.100.63.255 bge0:2: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2 inet 10.100.0.22 netmask ffffc000 broadcast 10.100.63.255 bge3: flags=1004843<UP,BROADCAST,RUNNING,MULTICAST,DHCP,IPv4> mtu 1500 index 12 inet 169.14.60.37 netmask fffffe00 broadcast 169.14.61.255 cat /etc/defaultrouter 10.100.0.254 169.14.60.1 cat /etc/resolv.conf nameserver 169.14.96.73 nameserver 169.10.8.4 netstat -rn Routing Table: IPv4 Destination Gateway Flags Ref Use Interface -------------------- -------------------- ----- ----- ------ --------- 169.14.60.37 169.14.60.1 UGH 1 0 169.14.60.0 169.14.60.37 U 1 18 bge3 10.100.0.0 10.100.0.3 U 1 34940 bge0 10.100.0.0 10.100.0.22 U 1 0 bge0:2 224.0.0.0 10.100.0.3 U 1 0 bge0 default 10.100.0.254 UG 1 111 default 169.14.60.1 UG 1 26 127.0.0.1 127.0.0.1 UH 10 59464 lo0 bash-2.05$ sudo ndd -get /dev/ip bge0:ip_forwarding 1 bash-2.05$ sudo ndd -get /dev/ip bge3:ip_forwarding 1 bash-2.05$ sudo ndd -get /dev/ip ip_forwarding 1

  Read the article

• cannot connect to vpn server (error 721)

  - by callmeblessed

  Hi I got 2 internet connections in my computer. One is using 3.5G HSDPA modem (vodafone huawei e220) and the other using mobile phone (cdma zte c261). Both are using different ISP and i have both. at the moment, i can connect to my office vpn using the HSDPA modem one. But when i tried to use cdma modem (dial up - mobile phone modem), i am just able to get "verifying username and password" and then after a few minutes it display error : Error 721 The Remote Computer didn't respond. I tried to ping into my office ip address, it got good result but still cannot connect to the vpn. I tried to turn off all my firewall (i'm using commodo) and has no response as well. In my cdma mobile phone modem Network connections I tried to allow iNternet connection sharing as well ... and turn on all Internet Protocol TCP/IP, File & Printer Sharing & Client for microsoft networks. But all of my effort has no effect. How to fix this problem ? note: my office using windows vpn as well. thank you .

  Read the article

• How to set up daisy-chained routers for separate sub-nets?

  - by joe

  This question seems to be similar to others, but I'll take a shot anyway. A client recently switched ISPs from TDS to Comcast Business Class. Before the switch, they had 5 static IP addresses assigned. Now they'll have a single IP address that will change whenever Comcast decides to do so. The issue is that this internet connection will be shared among two companies, both having (and wanting to keep) their own private subnets. Because TDS was supplying multiple IP addresses to the one location, this allowed me to put each router on the switch. Now, with Comcast, they only get one IP address, meaning there has to be a main router before the subnet routers. Luckily, the cable modem has a built-in router, which I would like to connect to each company's router, and still have DHCP enabled on all accounts. Question: What do I need to do to the subnet routers to keep them separate from each other, but still allow internet access from the main router. I would love to say "I tried this", and give you links, but everything I find on the internet only mentions daisy-chaining routers with DCHP disabled.

  Read the article

• Chrome - Why am I automatically authenticated to a web app even after clearing browser cookies?

  - by Howiecamp

  I am accessing a web application using Chrome. If I sign out of the app and clear all Chrome history/cookies/etc (even Flash cookies which are now handled by Chrome in the same Clear History area) and then re-access the site, I am automatically logged in without being prompted for credentials. I then launched Chrome in Incognito mode and was able to reproduce the same behavior. However, the I was prompted upon the first logon while in Incognito mode. The web application behaves as expected in Internet Explorer 10. Some info about the application: It's a Sharepoint site using NTLM authentication The credentials are Active Directory-based, as the username is domain\username My connection is over the Internet and there is no AD relationship between my local Windows account, my Windows PC. In other words I (meaning my locally logged on user and my PC) are not in any way part of their AD domain. The site is running SSL on port 443 Why might Chrome be automatically authenticating me?

  Read the article

• unable to access Internet by wireless but can by cable

  - by Jeff King

  i'M GOING MAD! UNtil last friday I had been successfully using wifi with the supplier as VIRGIN through their Motorola SB 4200 cable Modem and the wireless router being the Linksys WRT 54G router. Supported were three lap tops and an EPSON 510W printer and this had been running with no issue for about 3 years. Back to last friday, we started suffering significant delays and then the network collapsed with no wireless access. I was able to connect a single laptop direct to the cable modem and internet access was restored to just that one device. I thought that the problem was the router so I tried a backup D-Link device with no success. I have subsequently bought another cable modem AND a netgear router plus addidtional ethernet cables but with no success. The best that happens is that the signal appears good but I cannot get access to the internet. A yellow question mark appears on the 'gradient' icon. Each laptop and router works elsewhere so I'm stumped. Mind you I am a real novice so I'm not surprised. Please can anyone tell me what I'm doing wrong?

  Read the article

• Intel Ethernet Bottlenecking Internet?

  - by Donald Darma

  I'm having trouble with my internet speeds. So I just recent build a pc and everything is fine. I installed the Intel drivers and connected to the internet. It connects but I'm only half the speed I should be getting. My normal speed is 20mbps but speedtest.net is only showing 10. It can't be my ISP (which is TWC if anyone is asking) because my other devices like my laptop and my smartphone are showing 20 down. Heres my system: CPU: i5 4430 HSF: Stock cooler Mobo: Gigabyte Z87MX-D3H GPU: x2 MSI R7950-3GD5/OC BE RAM: Crucial Ballistix Tactical Tracer 8GB dual channel PSU: Silencer High Performance Power Supply 750 Watt 80+ (It's a subdivision of OCZ) HDD: Seagate Barracuda 7200RPM 3TB SSD: Samsung 840 Evo 120 GB Case: Corsair Obsidian 350D Edit: I am using the stock adapter that is on the motherboard. I know for a fact that the cable is good because I used it on my laptop and it ran fine. Its a CAT5E cable. I also ran IPERF and its giving me the same results, 10 mbps.

  Read the article

• very slow internet with Linksys WRT54GL only in wireless mode (wired is OK)

  - by gojira

  I bought a new Cisco Linksys WRT54GL router to connect my laptop (running Windows 7) to the internet. I installed Tomato 1.28 firmware on the router. When I connect the laptop to the router via ethernet cable, everything is fine and I get extremely fast up- and download speeds. When I connect wirelesssly however, websites load extremely slow - it takes dozens of seconds to load a website! <-- This is my question, how can I fix the wireless speed issue? Gmail for example is unusable this way. I tried speedtest.net, but this always fails in the upload part of the test so I can't even test the bandwidth (could the fact that it fails in the upload part, not the download part, be an indication what the problem is?!). I have isolated the problem a bit, I am convinced it has to do either with the router itself, the router settings, or the settings of the wireless connection in Win 7. Because previously, I was using another router by Buffalo and I had no problems whatsoever. I have tried to reproduce the settings from the Bufallo router as closely as possible on the Linksys router (same channel, same encryption etc). The download speed problem only occurs with the Linksys router, and only in wireless mode! When I exchange the Linksys router with the Buffalo router I have here for testing, the wireless speed is up to normal again. Also, before I had installed the Tomato firmware I had exactly the same problem, so it has nothing to do with the firmware itself. Notes & things I already tried: Changing the channel: does not seem to affect anything, I am also on the same channel (10) which I was previously on when I had a Buffalo router. QoS is off. Ping to the router itself is OK, ~ 1 ms. Some current settings of the linksys router: WAN / Internet Type: DHCP Wirelesss Mode: Access Point B/G Mode: Mixed Broadcast: check Channel: 10 - 2.457 GHz Security: WPA2 Personal Encryption: AES

  Read the article

• Installing MFC (vs2005) application on Windows 2008 R2 64

  - by olich

  I've build an application that runs on Windows 2003, it is an old style MFC application. Today I need to install the application on a Windows 2008 R2 64 system. I have failures during installation and the application does not run. The application is build with VisualStudio2005, and uses COM objects. The MSI register the objects but it fails with the error code : HRESULT -2147010895. Any idea why the COM registration failed? I've tried to install the "Microsoft Visual C++ 2005 Redistributable Package (x86)" but it doesn't help. I've tried to register the COM objects with the regsvr32 after the installation but sadly it doesn't help. I've tries to install the application on Windows 2008 R2 32, and it works perfectly. I am quite new with 64 systems, so any help will be appreciated. tia olich

  Read the article

• Srvany Starts but Application doesn't

  - by mharran

  I used Instsrv and Srvany as to create a service on W2008; the Srvany service starts okay but the application does not start. The application is TeamSpeak 3 btw. I don't think it's an issue with my W2008 setup as I have a previous version of the application set up the exact same way and running perfectly. Also, I have no problem manually starting the application even when I copy and paste into the 'Run' box the path used for the application by Srvany. I looked at Events but nothing there except notification that the service has entered the running state, didn't really expect any errors as the service has started even though the application hasn't. Any suggestions on what could be the problem?

  Read the article

• How to use 2 or more internet connections on the same network?

  - by Rogue

  Living in a joint family we have 3 internet connections, each floor has one internet connection which is split per floor. Each internet connection is shared between 4-5 computers using a switch per floor. Each of these internet sharing networks are independent of each other. What I want to achieve here is a local network (for local messenger and file sharing) that can combine all the 3 independent networks, problem is that whenever I try to do that the whole network tends to use just one internet connection. I have all the necessary hardware. How do I solve this problem, one approach could be that I could get one PC to act as a server and bridge the internet connections and then the whole network would have to access the internet through this server. Theoretically this could be possible but I have never tried this approach in real life. Also if certain computers need be restricted from internet access how would this be possible on the same network?

  Read the article

• Software/hardware to build video streaming server?

  - by Sasha Yanovets

  I am looking for a video streaming server solution, something like online TV server, with ability to make live broadcasts in the internet. What software could you recommend for that? What kind of hardware it should run on, should be there anything special? I am looking for a solution that could be scaled up to at least 1000 simultaneous users online with good resolution of video. I think it is good to have general answer on what direction to choose. But here more details on my specific case: I just looking for a solution almost from scratch. We have some video content that we've produced, but it is not delivered over internet yet. We do not tied to any particular vendor for now. We want to make 24 hours of steaming three 8 hour blocks with change of content every day. We want the ability to make regular live broadcasts. I guess we will need to have several options of streaming quality (low ~56 kb/s mid ~273 kb/s). Some terms just foreign to me (like play-truncation rate), if you could point out what parameters we should avare of, it would be great. Uplink to the internet is to be determined. We plan to start from something and scale up on the way. If you are already have some kind of media streaming server, just describe its configuration here (hardware, OS, software), peak number of concurrent users it serves. I think it could help people approaching this task.

  Read the article

• Exchange 2003 Internet Mail Size Limits

  - by scampbell

  I have unsuccessfully tried to increase per user incoming mail size settings by editing their user account settings on our Exchange server, but large incoming mail from external domains is still blocked using the default global settings. After reading here: http://support.microsoft.com/default.aspx?scid=kb;en-us;322679 I see that All Internet e-mail messages use the global setting for limits on sending and on receiving. The message categorizer evaluates the sender's sending limit and the recipient's receiving limit. In example 2 earlier, a user with a user mailbox limit of 3 MB could receive messages from another user with a 3-MB sending limit. Because Internet users use the global setting, they can send only a 2-MB message. Which to me is madness! Surely if I want to allow a user to receive mail up to a certain size then I should be able to set it as such? Is there a specific way of getting round this? Would setting the global defaults high and setting a lower, say 10MB, limit on the SMTP connector do the trick? Thanks.

  Read the article

• Without an internet connection my computer loads programs slowly. With an internet connection they load quickly

  - by Peter pete

  Gday. I've a laptop, with 8gb of RAM and a Samsung 830 SSD with about 2/5th of free space out of its 256gb. Win7 64b. Laptop is a Toshiba T130. In the other day I noticed that it took a long time to load a program, for example the python interpreter at the time the computer didn't have access to the home network. In both cases the computer boots quickly. About 40 seconds. Without internet opening the python interpreter, or notepad2.exe, or any program individually takes around 10 seconds. With internet connection (through WiFi) opening the same programs takes about 2 seconds. In both cases, it becomes SSD-instant-quick to open a program from a cold boot. I don't have any network mapped drives. I've tried with AV off (Avast antivirus) and same effect. I've installed all MS updates. I've googled and googled and have found nothing of help. I've run the Samsung SSD magician to "optimise" ssd and that didn't help. What could I do to determine & fix this issue?

  Read the article

• Setup shared internet connection on virtualbox with fixed IP

  - by Tom

  I am a web developer and until recently I have been using ubuntu as my OS. For many reasons, I have switched back to windows. I still want to keep my server on linux platform, so I setup my local server as a virtual machine. Everything works great, but i have a little struggle with the networking. Since I am working in different places and going around clients, I connect to all sorts of network with different settings. That means the possible IP range is very dynamic which causes issues when I work on my local server. At the moment I have a dynamic IP on my host and static IP on my guest. That way I can access the server from my host (by adding record to hosts file). I also have internet connection on the guest. But once i change networks, it does not work (assuming the network has different configuration). My question is, how to setup host-guest networking, so no matter what network I connect to, I can keep my static IP on guest, which is registered in hosts file on my host so I can access the webserver and also I will have internet connection on the guest? Hope it make sense. Thank you

  Read the article

• Windows 7 migration: How to move application settings?

  - by FrustratedWithFormsDesigner

  Migrating from WindowsXP Home to Windows 7 Pro. The last bit that I'm stuck on is migrating application settings, such as the settings for Opera, Firefox, MSN Messenger, and others. On the XP system, this all seems to be in "user/Local Settings" and "user/Application Data". On the Windos 7 system, there is a "user/AppData" folder as well as "user/Application Data" and "user/Local Settings". When I try to access "Application Data" and "Local Settings" on Windows 7, I get an "Access Denied" error (even though my user is an admin). So... if I can't copy my application settings files to "Application Data" and "Local Settings" on Windows 7, where to I copy them to?

  Read the article

< Previous Page | 120 121 122 123 124 125 126 127 128 129 130 131  | Next Page >