Search Results

Search found 86974 results on 3479 pages for 'visualsvn server'.

Page 1249/3479 | < Previous Page | 1245 1246 1247 1248 1249 1250 1251 1252 1253 1254 1255 1256  | Next Page >

• IIS 7.5 stops serving requests for no apparent reason

  - by Steffen

  We're running a site on 4 virtual Win 2008 R2 64 bit servers. This is the only site on the IIS, and we use Windows Network Load Balancing to share the load between our 4 virtual servers. We've used these virtual servers for approximately a week, and we're starting to see some issues. For no apparent reason the IIS stops serving pages, and doesn't even respond with an error. So upon requesting a page from the server, the browser just waits infinitely (or until it decides to give up clientside) Sometimes an iisreset fixes the issue, other times we have to reboot the entire virtual server. There are no traces in the eventlog of why this happens, and there's no traces in our applications exception log neither. Furthermore this happens even when there's a very small load on the server, so it doesn't seem to be because it's flooded with requests. So frankly I'm at a loss here - I have no idea where to start debugging this issue :-( I'm quite certain we never had these issues on our physical servers, however they were running Win 2003 32bit, so there are quite a few differences between them and the virtual ones. (Which obviously makes it difficult to tell what exactly causes this)

  Read the article

• Exchange Connector Won't Send to External Domains

  - by sisdog

  I'm a developer trying to get my .Net application to send emails out through our Exchange server. I'm not an Exchange expert so I'll qualify that up front!! We've set up a receive Connector in Exchange that has the following properties: Network: allows all IP addresses via port 25. Authentication: Transport Layer Security and Externally Secured checkboxes are checked. Permission Groups: Anonymous Users and Exchange Servers checkboxes are checked. But, when I run this Powershell statement right on our Exchange server it works when I send to a local domain address but when I try to send to a remote domain it fails. WORKS: C:\Windows\system32Send-Mailmessage -To [email protected] -From [email protected] -Subject testing -Body testing -SmtpServer OURSERVER (BTW: my value for OURSERVER=boxname.domainname.local. This is the same fully-qualified name that shows up in our Exchange Management Shell when I launch it). FAILS: C:\Windows\system32Send-Mailmessage -To [email protected] -From [email protected] -Subject testing -Body testing -SmtpServer OURSERVER Send-MailMessage : Mailbox unavailable. The server response was: 5.7.1 Unable to relay At line:1 char:17 + Send-Mailmessage <<<< -To [email protected] -From [email protected] -Subject testing -Body himom -SmtpServer FTI-EX + CategoryInfo : InvalidOperation: (System.Net.Mail.SmtpClient:SmtpClient) [Send-MailMessage], SmtpFailed RecipientException + FullyQualifiedErrorId : SmtpException,Microsoft.PowerShell.Commands.SendMailMessage EDIT: From @TheCleaner 's advice, I ran the Add-ADPermission to the relay and it didn't help; [PS] C:\Windows\system32Get-ReceiveConnector "Allowed Relay" | Add-ADPermission -User "NT AUTHORITY\ANONYMOUS LOGON" -E xtendedRights "Ms-Exch-SMTP-Accept-Any-Recipient" Identity User Deny Inherited -------- ---- ---- --------- FTI-EX\Allowed Relay NT AUTHORITY\ANON... False False Thanks for the help. Mark

  Read the article

• finding the best network latency between two countries

  - by Yoav Aner

  I know there are many tools to test for bandwidth and latency, but they all rely on having at least one host from which you can run those tests. I wonder whether there's an online source or some other way to guestimate the latency or speed between two countries (in general). For example, would a customer in Japan get lower latency if the server is located in Singapore or Australia? Is a user in India likely to get higher download speed from a server in the UK or in the US? Are there any online resources or some clever ways to answer those questions with a reasonable degree of accuracy? [UPDATE]: Thanks for the great suggestions from Raffael Luthiger. I didn't know about those looking glass servers. The submarine cable maps were also really cool to discover (Thanks to Jesper Mortensen). Also seems really wise if I could ask those network professional in the area for their experience, but obviously I don't have access to those. At least some of them are on SF :) However, I'm still a little unsure how to combine those resources to give me some measurements. This is the information I have: Two countries (A,B). I do have IP addresses of customers in country A (I can obtain those from the web server log files for example). Presumably I can find some looking glass servers in country B and run a trace to those IPs. What's the best measurements to use? Are there any scripts that help automate at least some of this process?

  Read the article

• Why does redis report limit of 1024 files even after update to limits.conf?

  - by esilver

  I see this error at the top of my redis.log file: Current maximum open files is 1024. maxclients has been reduced to 4064 to compensate for low ulimit. I have followed these steps to the letter (and rebooted): Moreover, I see this when I run ulimit: ubuntu@ip-XX-XXX-XXX-XXX:~$ ulimit -n 65535 Is this error specious? If not, what other steps do I need to perform? I am running redis 2.8.13 (tip of the tree) on Ubuntu LTS 14.04.1 (again, tip of the tree). Here is the user info: ubuntu@ip-XX-XXX-XXX-XXX:~$ ps aux | grep redis root 1027 0.0 0.0 66328 2112 ? Ss 20:30 0:00 sudo -u ubuntu /usr/local/bin/redis-server /etc/redis/redis.conf ubuntu 1107 19.2 48.8 7629152 7531552 ? Sl 20:30 2:21 /usr/local/bin/redis-server *:6379 The server is therefore running as ubuntu. Here are my limits.conf file without comments: ubuntu@ip-XX-XXX-XXX-XXX:~$ cat /etc/security/limits.conf | sed '/^#/d;/^$/d' ubuntu soft nofile 65535 ubuntu hard nofile 65535 root soft nofile 65535 root hard nofile 65535 And here is the output of sysctl fs.file-max: ubuntu@ip-XX-XXX-XXX-XXX:~$ sysctl -a| grep fs.file-max sysctl: permission denied on key 'fs.protected_hardlinks' sysctl: permission denied on key 'fs.protected_symlinks' fs.file-max = 1528687 sysctl: permission denied on key 'kernel.cad_pid' sysctl: permission denied on key 'kernel.usermodehelper.bset' sysctl: permission denied on key 'kernel.usermodehelper.inheritable' sysctl: permission denied on key 'net.ipv4.tcp_fastopen_key' as sudo ubuntu@ip-10-102-154-226:~$ sudo sysctl -a| grep fs.file-max fs.file-max = 1528687 Also, I see this error at the top of the redis.log file, not sure if it's related. It makes sense that the ubuntu user isn't allowed to change max open files, but given the high ulimits I have tried to set he shouldn't need to: [1050] 23 Aug 21:00:43.572 # You requested maxclients of 10000 requiring at least 10032 max file descriptors. [1050] 23 Aug 21:00:43.572 # Redis can't set maximum open files to 10032 because of OS error: Operation not permitted.

  Read the article

• postfix smtp_fallback_relay for deferred messages to a single domain

  - by EdwardTeach

  I use Postfix to send messages to a mail server outside my organization which frequently rejects/defers my mail. My Postfix server sees that these messages are deferred and tries again, eventually getting through. Final delivery can take up to an hour, which makes my users unhappy. In comparison, mail from my Postfix server to other hosts works normally. I have now found out about a second, unofficial MX for this domain that does not reject/defer mail. This second MX does not appear when doing a DNS MX query for the domain. Therefore, for the problem domain I would like to use this second MX as a fallback. That is: whenever mail is deferred by the primary MX, try again on the unofficial second MX. I see that there is already a postfix configuration "smtp_fallback_relay". However the documentation seems to indicate that I can not restrict usage of the fallback to a single domain. The documentation also doesn't mention deferred message handling. So is there a way to configure a single-domain, deferred-retry fallback host in Postfix? For reference, I am including my postconf output (the host names and ip addresses are fake): alias_database = hash:/etc/aliases alias_maps = hash:/etc/aliases, hash:/etc/postfix/legacy_mailman, ldap:/etc/postfix/ldap-aliases.cf append_dot_mydomain = no biff = no config_directory = /etc/postfix default_destination_concurrency_limit = 2 inet_interfaces = all inet_protocols = all local_destination_concurrency_limit = 2 local_recipient_maps = $alias_maps mailbox_size_limit = 0 mydestination = myhost.my.network, localhost.my.network, localhost, my.network myhostname = myhost.my.network mynetworks = 127.0.0.0/8, [::ffff:127.0.0.0]/104, [::1]/128, 10.10.10.0/24 myorigin = my.network readme_directory = no recipient_delimiter = + relay_domains = $mydestination relayhost = smtp_fallback_relay = the.problem.host smtp_header_checks = smtpd_banner = $myhostname ESMTP $mail_name virtual_alias_maps = hash:/etc/postfix/virtual

  Read the article

• Apache error "child pid XXXX exit signal exceeded file size limit (25)"

  - by Stephen Melrose

  Morning all, Apache on our internal development server stopped working last night. It's running, but all we get is a blank screen, no server errors. Examing the error log shows the following, [Fri Apr 23 09:13:57 2010] [notice] child pid XXXX exit signal exceeded file size limit (25) [Fri Apr 23 09:14:03 2010] [notice] child pid XXXX exit signal exceeded file size limit (25) [Fri Apr 23 09:14:03 2010] [notice] child pid XXXX exit signal exceeded file size limit (25) [Fri Apr 23 09:14:06 2010] [notice] child pid XXXX exit signal exceeded file size limit (25) After some Googling, we found that this is due to Apache trying to handle a file greater than it's maximum allowed limit, which by default is 2GB and is usually an error log. I did a search using find . -size +1000000k -ls (find all files greater than 1GB) in our log and web folders, but nothing showed up. I've also restarted Apache and rebooted the server itself serveral times. I've completely wiped the log folder and started a fresh. Nothing is working. Any ideas as to what else might be causing this? Thank you

  Read the article

• VPN Client solution

  - by realtek

  I have several VPN's that I need to establish on a daily basis but from multiple workstations. What I would like to do it have either a server or vpn router that can perform this connection itself and that I can then route traffic through this device or server depending on the subnet I am trying to reach. The issue is that I only use VPN Clients to connect, so I am basically trying to achieve almost a site to site VPN but by using basically a VPN Client type connection from my network. The main VPN Client I use is the Sonicwall Global VPN Client where I initially use a Preshared Key and then it always prompts me for a username and password (not RSA key). My question is, is there any type of linux distro or even a hardware vpn router that can do this and connect to a Sonicwall device as if it were a client? I have tried pfSense which is very good but it fails to connect, probably due to a mismatch of settings. I have tried many others. Even dd-wrt on my router but it does not support whatever protocol Sonicwall uses. (I thought L2TP/IPSec) but it appears it may not be that. Any advice would be great! The other other thing I have thought of that I have not tried yet is Windows Server Routing and Remote Access but I have a feeling that won't work either. Thanks

  Read the article

• Facing application redirection issue on nginx+tomcat

  - by Sunny Thakur

  I am facing a strange issue on application which is deployed on tomcat and nginx is using in front of tomcat to access the application from browser. The issue is, i deployed the application on tomcat and now setup the virtual host on nginx under conf.d directory [File i created is virtual.conf] and below is the content i am using for the same. server { listen 81; server_name domain.com; error_log /var/log/nginx/domain-admin-error.log; location / { proxy_pass http://localhost:100; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_set_header Host $http_host; } error_page 500 502 503 504 /50x.html; location = /50x.html { root html; } Now the issue is this when i am using rewrite ^(.*) http://$server_name$1 permanent; in server section and access the URL then this redirects to https://domain.com and i am able to log in to app and able to access the links also [I am not using ssl redirection in this host file and i don't know why this is happening] Now when i removed this from server section then i am able to access the application from :81 and able to logged into the application but when i click on any link in app this redirect me to the login page. I am not getting any logs in application logs as well as tomcat logs. Please help on this if this is a redirection issue of nginx. Thanks, Sunny

  Read the article

• FastCGI Error when installing PHP on IIS7.5

  - by ytoledano

  I'm trying to install MediaWiki on a Win2008r2 server, but can't manage to install PHP. Here's what I did: Grabbed a Zip archive of PHP and unzipped it into C:\PHP. Created two subdirs: c:\PHP\sessiondata and c:\PHP\uploadtemp. Granted modify rights to the IUSR account for the subdirs. Copied php.ini-production as php.ini Edited php.ini and made the following changes: fastcgi.impersonate = 1 cgi.fix_pathinfo = 1 cgi.force_redirect = 0 open_basedir = "c:\inetpub\wwwroot;c:\PHP\uploadtemp;C:\PHP\sessiondata" extension = php_mysql.dll extension_dir = "./ext" upload_tmp_dir = C:\PHP\uploadtemp session.save_path = C:\php\sessiondata Install Web server role, selected CGI and HTTP Redirection options. In the Handler Mappings: Added Module Mapping. Entered the following values: Path = *.php, Module = FastCgiModule, Executable = c:\php\php-cgi.exe, Name = PHP via FastCGI. Created a test page into wwwroot directory: phpinfo.php and set the contents like this: < ?php phpinfo(); ? Browsed to http://localhost/phpinfo.php But then I get: HTTP Error 500.0 - Internal Server Error An unknown FastCGI error occured Detailed Error Information Module: FastCgiModule Notification: ExecuteRequestHandler Handler: PHP via FastCGI Error Code: 0x800736b1 Requested URL: http://localhost:80/phpinfo.php Physical Path: C:\inetpub\wwwroot\phpinfo.php Logon Method: Anonymous Logon User: Anonymous Does anyone know what I'm doing wrong here? Thanks.

  Read the article

• WebDav System Error 67 in Windows XP

  - by Nixphoe

  Issue: I'm having issues getting WebDav to work in the command line on Windows XP, both Service Pack 2 and Service Pack 3. C:\>net use z: https://mywebsite.com/software/ System error 67 has occurred. The network name cannot be found. I have tested this with two webdav server. Both Ubuntu Apache and I Windows Server 2003 IIS. Both get the same result. Things That Haven't Worked: I've installed the following Microsoft KB on my XP machines with no avail. I've also found the following reg key: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\WebClient\Parameters UseBasicAuth REG_DWORD 1 I try the following when trying to use a few work around I've dug up on the web, all producing the same result. net use z: https://mywebsite.com/software net use z: https://mywebsite.com/software# net use z: https://mywebsite.com/software/ net use z: https://mywebsite.com/software/# I've also tried all the above combinations adding a user into it /user:user and /user:user@domain. I've also tried using http:// rather than https://. I've tried "\\server.com@ssl:443\folder" I've gone over networking related issues as @WesleyDavid had pointed out. Things that do work: I can connect to the webdav folder via the URL and with mapping in Network Place, with XP. But the command line doesn't work (I need a drive letter). Windows 7 works perfectly with the same command. My Delemma: I need this to work with a drive letter. What else can I try to get this working?

  Read the article

• One-To-Many Powershell Scripts

  - by Matt

  I'm trying to create a script to run as a scheduled task, which will run against multiple servers and retrieve some information. To start with, I populate the list of servers by querying AD for all servers that match a certain set of criteria, using Get-ADComputer. The problem is, the list is returned as an object, which I can't then pass to the New-PSSession list. I have tried converting it to a comma-seperated string by doing the following: foreach ($server in $serverlist) {$newlist += $server.Name + ","} but this still doesn't work. the alternative is to iterate through the list and run the various commands against each server one at a time, but my preference would be to avoid this and run them using one-to-many remoting. UPDATE: To clarify what I want to end up being able to do is using -ComputerName $serverlist, so I want $serverlist to be a string rather than an object. UPDATE 2: Thanks for all the suggestions. Between them and my original method I'm starting to wonder whether -ComputerName can accept a string variable? I've got varying degrees of success getting the list of computers converted to a comma separated string, but no matter how I do it I always get invalid network address.

  Read the article

• Splitting build cross the network?

  - by Dandikas

  Is there a known solution for splitting build process cross the network machines? Use case: We are an average software development company. We own around 50 development workstations (Quad Core 2.66Ghz, 4 GB ram, 200 GB raid). No need to tell that at any single moment not every machine is loaded to the max. There are 5 to 15 projects running simultaneously at any single moment. Obviously all of them are continuously build on server, than deployed to proper environment. Single project build is taking from 3 to 15 minutes. The problem: Whenever we build 5 projects in a row the last project is going to be ready after around 25 - 50 minutes. Building in parallel does not solve the problem (build is only a part of the game, than you need to deploy, run tests etc.) YES the correct solution is to add another build server, but "That involves buying new Expensive hardware, and we already spent a lot!". Yea, right(damn them)! Anyway. What about splitting build among developers workstation? Lets say whenever we need to build project "A" we check 5 workstations and start build on all that are not overloaded. The build can be canceled by a developer if he really needs all the power of his machine as long as there is at least 1 machine that is still building. After build is finished deployment can be performed to a proper environment (hosted on some server, not on workstation :) ). The bigger the company the more this makes sense to me. Anyone tried something like this? Are there any good practices? Any helpful software?

  Read the article

• Website has become slower on a VPS, was much fast on a shared host. What's wrong?

  - by Arpit Tambi

  My shared host suspended my website stating system overload, so I moved my website to a VPS which has 4GB RAM. But for some reason the website has become very slow. This is the vmstat output - procs -----------memory---------- ---swap-- -----io---- --system-- -----cpu------ r b swpd free buff cache si so bi bo in cs us sy id wa st 1 0 0 3050500 0 0 0 0 0 1 0 0 0 0 100 0 0 Here's the Apache Benchmark output for a STATIC html page I ran on the server itself - Benchmarking www.ask-oracle.com (be patient)...apr_poll: The timeout specified has expired (70007) Total of 20 requests completed Update: Server Config: List item Centos 5.6 4 cores cpu 4 GB RAM LAMP stack with APC Wordpress Only one website It takes almost double time to load now, same website was much fast on shared hosting. I know I need to tweak some settings but have no clue where to start from? I have already tried to optimize apache, mysql etc. Update 2: CPU usage is low, see uptime output: 11:09:02 up 7 days, 21:26, 1 user, load average: 0.09, 0.11, 0.09 Update 3: When I load any webpage, browser shows "Waiting" for a long time and then page loads quickly. So I suspect server can accept only limited connections and holds extra connections in a waiting state. How to check this? Update 4: Following is the output on executing netperf TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to localhost.localdomain (127.0.0.1) port 0 AF_INET Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 87380 16384 16384 10.00 9615.40 [root@ip-118-139-177-244 j3ngn5ri6r01t3]# Here are the Apache MPM settings from httpd.conf, do they look okay? <IfModule worker.c> StartServers 5 MaxClients 100 MinSpareThreads 50 MaxSpareThreads 250 ThreadsPerChild 125 MaxRequestsPerChild 10000 ServerLimit 100 </IfModule>

  Read the article

• IIS 7.0 - responses throttled to 500ms blocks?

  - by Julia Hayward

  Scenario: ASP.NET MVC wep app sitting on my local machine (Vista Ultimate, IIS 7.0), nothing going on except one user (me) logged in and viewing an index page. The page includes 9 dynamic images drawn from the underlying DB and returned from a controller action. I have got the actual processing time for these images down to 15ms each. Turn on Firebug and watch the page load. What I see is 9 requests for images firing off together – no surprise – but four come back to me almost immediately; two more after 0.5s; another after 1s; then at 1.5s and 2s. Logging on the server side suggests the individual responses are still only taking 15ms. So it appears IIS is queueing things up into 500ms chunks. (Repeating the experiment produces different results, but each time the images return in similar blocks – you might get three in the first group, then three at 0.5s, two at 1s etc, for example – and it’s always at 500ms intervals, not anything else.) It’s also repeatable cross-browser, and it’s not repeatable with other forms of content. I haven't found any particular mention of this problem out there, so I'm sort of assuming it's not an IIS bug, so is it: i) IIS on desktop OSs deliberately does it, to make you use server OSs in production? ii) There is some magical setting that has eluded me for as long as I’ve known IIS? iii) Something peculiar to MVC or SQL Server 2008? or something else?

  Read the article

• postfix takes 60-90ms to queue email -- normal?

  - by Jeff Atwood

  We're seeing some (maybe?) strange delays when submitting individual emails to our local Postfix server. To help diagnose the issue, I wrote a little test program which sends 5 emails: get smtp 1ms ( 1 ms) email 0 677ms (676 ms) email 1 802ms (125 ms) email 2 890ms ( 88 ms) email 3 973ms ( 83 ms) email 4 1088ms (115 ms) Discounting the handshaking in the first email, that's about 90ms per email. These timings have also been corroborated with another test app written by someone else using a different codepath, so it appears to be server related. I turned on detailed logging and I can see that the delay is between the end of message \r\n\r\n and the receive: [16:31:29.95] [SEND] \r\n.\r\n [16:31:30.05] [RECV] 250 2.0.0 Ok: queued as B128E1E063\r\n [16:31:30.08] [SEND] \r\n.\r\n [16:31:30.17] [RECV] 250 2.0.0 Ok: queued as 4A7DE1E06E\r\n [16:31:30.19] [SEND] \r\n.\r\n [16:31:30.27] [RECV] 250 2.0.0 Ok: queued as 68ACC1E072\r\n [16:31:30.28] [SEND] \r\n.\r\n [16:31:30.34] [RECV] 250 2.0.0 Ok: queued as 7EFFE1E079\r\n [16:31:30.39] [SEND] \r\n.\r\n [16:31:30.45] [RECV] 250 2.0.0 Ok: queued as 9793C1E07A\r\n The time intervals tell the story (discounting the handshaking required for the initial email) -- each email is waiting about 60-90 milliseconds for postfix to queue! This seems .. excessive .. to me. Is it "normal" for postfix to take 60-90 ms for every email you send it? Or do I just have unreasonable expectations? I would expect the local postfix server to queue the email in about 20ms, tops!

  Read the article

• Windows EFS file sharing anomaly

  - by wbkang

  Fyi, I can confirm this happening in Windows Vista (Business) and Windows 7 Professional in WORKGROUP mode (as both a client and a server). I am not totally sure if this is a Superuser question or a ServerFault question. So there are two PCs, let's call them C (client) and S (server). Both servers have a user called U with the same password. Both C and S has the same private/public key pair for EFS. S shares a folder F with U given full permission. Also locally, the user U has the full permission on F. Now, U, from C, connects to F at the server S, everything works totally fine. I can read,write, delete files and create/delete folders in S. Things go weird from here. I encrypt the folder F in S. I can delete/modify files fine (so the files in F decrypted OK). However, U from C, cannot create a folder, or create a file getting Access Denied. But this Access Denied is very special. It takes over 10 seconds at C to receive the error and the explorer freezes while trying to create a folder, eventually returning error. In S, I can watch the folder created at the same time, and what I see is "New Folder" blinking like crazy and eventually disappearing when the client receives the error. i.e. it's created and deleted in a really rapid manner. What I do not understand is that permissions look fine, I can modify/delete files, and it looks like there is no problem with EFS because I can read/write files fine. Yet it fails to create a file or a folder. Any help is appreciated. Thanks, wbkang

  Read the article

• How do I get basic ProxyPass to work on Apache 2.2.17?

  - by Ansis Malins

  I'm trying to get around the ERR_UNSAFE_PORT restriction in Chrome by making Apache reverse proxy other HTTP servers on the machine. I load mod_proxy with sudo e2enmod proxy I add ProxyPass /znc/ http://localhost:6667/ to my httpd.conf I restart Apache with sudo /etc/init.d/apache2 restart When I open up /znc/, I get 500 Internal Server Error. I added LogLevel debug, restarted apache, tried again, and got nothing suspicous: [Fri Oct 19 18:55:17 2012] [debug] proxy_util.c(1818): proxy: grabbed scoreboard slot 0 in child 21528 for worker http://localhost:6667/ [Fri Oct 19 18:55:17 2012] [debug] proxy_util.c(1934): proxy: initialized single connection worker 0 in child 21528 for (localhost) [Fri Oct 19 18:55:17 2012] [debug] proxy_util.c(1818): proxy: grabbed scoreboard slot 1 in child 21528 for worker proxy:reverse [Fri Oct 19 18:55:17 2012] [debug] proxy_util.c(1934): proxy: initialized single connection worker 1 in child 21528 for (*) [Fri Oct 19 18:55:17 2012] [notice] Apache/2.2.17 (Ubuntu) PHP/5.3.8 configured -- resuming normal operations [Fri Oct 19 18:55:17 2012] [info] Server built: Feb 14 2012 17:59:20 [Fri Oct 19 18:55:17 2012] [debug] prefork.c(1018): AcceptMutex: sysvsem (default: sysvsem) [Fri Oct 19 18:55:22 2012] [debug] proxy_util.c(1818): proxy: grabbed scoreboard slot 0 in child 21532 for worker http://localhost:6667/ [Fri Oct 19 18:55:22 2012] [debug] proxy_util.c(1837): proxy: worker http://localhost:6667/ already initialized [Fri Oct 19 18:55:22 2012] [debug] proxy_util.c(1934): proxy: initialized single connection worker 0 in child 21532 for (localhost) [Fri Oct 19 18:55:22 2012] [debug] proxy_util.c(1818): proxy: grabbed scoreboard slot 1 in child 21532 for worker proxy:reverse [Fri Oct 19 18:55:22 2012] [debug] proxy_util.c(1837): proxy: worker proxy:reverse already initialized [Fri Oct 19 18:55:22 2012] [debug] proxy_util.c(1934): proxy: initialized single connection worker 1 in child 21532 for (*) So I'm stumped at this point. What to do? I'm running Ubuntu Server 11.10. ZNC responds with a correct 200 OK and HTML when queried directly both from the local machine and the Internet.

  Read the article

• Standalone WLST for both WebLogic 8.1 and 9.2?

  - by imiric

  Hi, I'm writing a simple script to facilitate changing JDBC connection URLs in several WL environments, among these both v8.1 and v9.2. I want to create a standalone script, outside of any WL installation, just including wlst.jar/jython.jar/weblogic.jar, that will work both on WL 8.1 and 9.2 (obviously by referencing different MBeans). Now, this works OK for WL 8.1. I copy weblogic.jar from the server, and have managed to get ahold of both wlst.jar and jython.jar (wasn't easy, Oracle doesn't host them anymore). Also I need to make sure to locally run under the same JRE as the server (WL8.1 runs on Java 1.4.2). But if I try to connect to WL 9.2 from this setup, I get a NullPointerException when trying to access any MBean (probably because I'm running on JRE 1.4.2 and WL 9.2 uses 1.5.0). Also, I am unable to create a standalone environment for WL 9.2. If I copy weblogic.jar from 9.2 and run WLST like so: java -cp "wlst.jar:jython.jar:weblogic-92.jar" weblogic.WLST I get a java.lang.NoClassDefFoundError: weblogic/management/configuration/RepositoryMBean error. I can't find this class in weblogic92/server/lib, but it IS inside weblogic.jar from WL 8.1. So I'm really losing my patience here... Is there any way to create a standalone WLST client that can connect to any version of WebLogic (8.1 & 9.2 in the meantime)? I really wouldn't want to have to ssh into the WL environment to run my WLST script... Any ideas/suggestions are welcome. Thanks, Ivan

  Read the article

• Kickstart: Serve dynamic kickstart images via a CGI or PHP script?

  - by Stefan Lasiewski

  I'd like to kickstart a couple dozen RHEL6/SL6 servers. However, some of these servers are different and I don't want to create a new ks.cfg file for each class of server. Are there any products which can generate a Kickstart file dynamically on the fly, from a template? For example, if I append a line like this to the KERNEL: APPEND ks=http://192.168.1.100/cgi-bin/ks.cgi Then the script ks.cgi can determine what host this is (Via the MAC address), and print out Kickstart options which are appropriate for that host. I could optionally override some options by passing parameters to the script, like this: APPEND ks=http://192.168.1.100/cgi-bin/ks.cgi?NODETYPE=production&IP=192.168.2.80 After we kickstart the server, we activate Cfengine/Puppet on this system and manage the system using our favorite Configuration Management product. We're experimenting with xCAT but it is proving too cumbersome. I've looked into Cobbler, but I'm not sure it does this. Update: A roll-your-own solution is discussed in the O'Reilly book: Managing RPM-Based Systems with Kickstart and Yum, Chapter 3. Customizing Your Kickstart Install Dynamic ks.cfg, which echos some of the comments in this thread: To implement such a tool is beyond the scope of this Short Cut, but I can walk through the high-level design. Any such solution would mix a data store (the things that change) with a templating solution (the things that don’t change). The data store would hold the per-machine data, such as the IP address and hostname. You would also need a unique identifier, perhaps the hostname, such that you could pick up a given machine’s data. The data store could be a flat file, XML data, or a relational database such as PostgreSQL or MySQL. In turn, to invoke the system, you pass a machine’s unique identifier as a URL parameter. For example: boot: linux ks=http://your.kickstart.server/gen_config?host-server25 In this example, the CGI (or servlet, or whatever) generates a ks.cfg for the machine server25. But where, oh where, is the code for ks.cgi?

  Read the article

• AD domain on web servers behind NAT - DNS issues?

  - by Ant

  I'm trying to setup an AD domain to manage the security between two Windows Server 2008 webservers that will sooner or later use NLB to balance website requests. I've hit a problem which I think is a simple solution and is down to DNS. My website domain is mydomain.com. The two servers are running behind a NAT firewall on the 10.0.0.0 IP range. I've setup the AD domain to be called ad.mydomain.com (as recommended by MS and a few other answers to questions on here). The second web server however doesn't want to join the domain, and gives an error pinning the problem on DNS - "ensure that the domain name is typed correctly" even though it queries the SRV record successfully and gets the correct DC back - dc.ad.mydomain.com. Doing a dcdiag /test:dns on the DC gives the Delegation error 'DNS Server dc.mydomain.com Missing glue A record'. I have a feeling I need to add something to the public DNS so that it in some way knows about ad.mydomain.com. Can anyone suggest whether I'm on the right track in adding something to the public DNS? Or whether it's something else? Many thanks

  Read the article

• Running a service with a user from a different domain not working

  - by EWood

  I've been stuck on this for a while, not sure what permission I'm missing. I've got domain A and domain B, A trusts B, but B does not trust A. I'm trying to run a service in domain A with a user account from domain B and I keep getting Access is Denied. I'm using the FQDN after the username and the password is correct. The user account from domain B is a local administrator on the domain A server, the user account has the logon locally, and as a service permissions. Must. Get. This. Working. Update: I found something interesting in the logs I must have missed. This ought to get me pointed in the right direction. Event ID: 40961 - LsaSrv : The Security System could not establish a secured connection with the server ldap/{server fqdn/fqdn@fqdn} No authentication protocol was available. I've found a few fixes for 40961 but nothing has worked so far. I've verified reverse lookup zones. nslookup resolves the correct dc properly. still workin' at it. Upadte: In response to Evan; I ran " runas /env /user:ftp_user@fqdn "notepad" " then entered the users password and notepad came up. It seems to work successfully. This issue is now resolved. The problem is visible in the screenshot. Windows tries to use the UPN for the user account if you dig your user out of AD with the Browse button. This fails every time even with the right user and password. Simply using the SAM format (Domain\User) works. So simple, yet so annoying. Can't believe I missed this. Thanks to everyone who helped.

  Read the article

• Provisioning DELL servers using only linux tools

  - by Krist van Besien

  We have taken delivery of a bunch off Dell Poweredge Rack servers. Unfortunately when ordering it was neglegted to ask for dhcp to be enabled in the built in iDRAC controlers... So they are all stuck on the same IP address. Which means that I'll have to go to each of them individually and configure a new IP in the console... In the future I want to avoid that. Now Dell proposes to deliver the next batch with auto discovery enabled. As I understand this means that when the machine wakes up for the first time the iDRAC will request a DHCP address. The DHCP server then supposedly also provides a "provisioning" server, that provides it with a username and password, and a configuration to be applied. This would allow us to for example configure things like RAID automatically. However, I can't seem to find a way to set up such a provisioning server that does not involve setting up a windows machine. I want to use Linux tools exclusively. Is there a way to do this? I want to just rack servers, switch them on, and then do everything remotely. And that using only linux tools?

  Read the article

• Can't connect to EC2 instance Permission denied (publickey)

  - by Assad Ullah

  I got this when I tried to connect my new instace (UBUNTU 12.01 EC2) with my newly generated key sh-3.2# ssh ec2-user@**** -v ****.pem OpenSSH_5.6p1, OpenSSL 0.9.8r 8 Feb 2011 debug1: Reading configuration data /etc/ssh_config debug1: Applying options for * debug1: Connecting to **** [****] port 22. debug1: Connection established. debug1: permanently_set_uid: 0/0 debug1: identity file /var/root/.ssh/id_rsa type -1 debug1: identity file /var/root/.ssh/id_rsa-cert type -1 debug1: identity file /var/root/.ssh/id_dsa type -1 debug1: identity file /var/root/.ssh/id_dsa-cert type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.9p1 Debian-5ubuntu1 debug1: match: OpenSSH_5.9p1 Debian-5ubuntu1 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.6 debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-ctr hmac-md5 none debug1: kex: client->server aes128-ctr hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug1: Host '****' is known and matches the RSA host key. debug1: Found key in /var/root/.ssh/known_hosts:4 debug1: ssh_rsa_verify: signature correct debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: Roaming not allowed by server debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey debug1: Next authentication method: publickey debug1: Trying private key: /var/root/.ssh/id_rsa debug1: Trying private key: /var/root/.ssh/id_dsa debug1: No more authentication methods to try.

  Read the article

• What's next for all of these Microsoft "overlapping" and "enhanced" products ?

  - by indyvoyage

  Recently I attended a road show, organised by MS Gold Partner company in the UK. The products discussed were: SharePoint server (2010 and 2007), Exchange server, Office Communication Server 2007, Exchange hosted services Office Live meeting, Office Communicator, System Center Configuration Manager and Operation Manager, VMware, Windows 7 etc. As Microsoft claims the enhancement in the each product against higher version, I felt that clients are not much interested in all these details. For example Office Communicator, surely they have improved a lot the product and first site all said 'WOW' great product, but nobody wish to pay money for all these extra features. Some argued, they are bogged down by all these increased number of menus. They don't need soft call feature included with mobile call. It apply for all other products as well such as MS office (next what 2 ribbons ?), windows OS and many more. Indeed there must be good features in all these products, but is it worth to spend money and time to update the older system ? Also sometimes these feature will decrease the productivity instead increase it. *So do you think what ever enhancement MS is doing in the products is only for selling purpose, not a real use ?? and I think also keep the developer busy learning the new tools and features. * I am sure some some people here will argue that some people need this sort of features. But I am not talking about NASA or MI5 guys. I am talking of usual businesses and joe public. Any ideas welcome.

  Read the article

• PHP sessions currupt

  - by Baversjo

  Using symfony framework 1.4 I have created a website. I'm using sfguard for authentication. Now, this is working great on WAMP (windows). I can login to several accounts on different browsers and use the website. I have ubuntu server 9.10 running apache (everything up to date and default configuration). On my server, when I login to the website in one browser it works great. When I on my other computer login with another user account on the public website, the login is successful. But when I refresh/go to another page the first user is shown as logged in instead! Also, when I press logout, It's not showing that I'm logged out after page load. When I press f5 again I'm logged out. As mentioned, all this works as expected on my local installation. I'm thinking there something wrong with my PHP session configuration on my ubuntu server, but I've never touched it.. Please help me. This is a school project and I'm presenting it today :(

  Read the article

< Previous Page | 1245 1246 1247 1248 1249 1250 1251 1252 1253 1254 1255 1256  | Next Page >