Search Results

Search found 67619 results on 2705 pages for 'help documentation'.

Page 125/2705 | < Previous Page | 121 122 123 124 125 126 127 128 129 130 131 132  | Next Page >

  • Need help with implementing collision detection using the Separating Axis Theorem

    - by Eddie Ringle
    So, after hours of Googling and reading, I've found that the basic process of detecting a collision using SAT is: for each edge of poly A project A and B onto the normal for this edge if intervals do not overlap, return false end for for each edge of poly B project A and B onto the normal for this edge if intervals do not overlap, return false end for However, as many ways as I try to implement this in code, I just cannot get it to detect the collision. My current code is as follows: for (unsigned int i = 0; i < asteroids.size(); i++) { if (asteroids.valid(i)) { asteroids[i]->Update(); // Player-Asteroid collision detection bool collision = true; SDL_Rect asteroidBox = asteroids[i]->boundingBox; // Bullet-Asteroid collision detection for (unsigned int j = 0; j < player.bullets.size(); j++) { if (player.bullets.valid(j)) { Bullet b = player.bullets[j]; collision = true; if (b.x + (b.w / 2.0f) < asteroidBox.x - (asteroidBox.w / 2.0f)) collision = false; if (b.x - (b.w / 2.0f) > asteroidBox.x + (asteroidBox.w / 2.0f)) collision = false; if (b.y - (b.h / 2.0f) > asteroidBox.y + (asteroidBox.h / 2.0f)) collision = false; if (b.y + (b.h / 2.0f) < asteroidBox.y - (asteroidBox.h / 2.0f)) collision = false; if (collision) { bool realCollision = false; float min1, max1, min2, max2; // Create a list of vertices for the bullet CrissCross::Data::LList<Vector2D *> bullVerts; bullVerts.insert(new Vector2D(b.x - b.w / 2.0f, b.y + b.h / 2.0f)); bullVerts.insert(new Vector2D(b.x - b.w / 2.0f, b.y - b.h / 2.0f)); bullVerts.insert(new Vector2D(b.x + b.w / 2.0f, b.y - b.h / 2.0f)); bullVerts.insert(new Vector2D(b.x + b.w / 2.0f, b.y + b.h / 2.0f)); // Create a list of vectors of the edges of the bullet and the asteroid CrissCross::Data::LList<Vector2D *> bullEdges; CrissCross::Data::LList<Vector2D *> asteroidEdges; for (int k = 0; k < 4; k++) { int n = (k == 3) ? 0 : k + 1; bullEdges.insert(new Vector2D(bullVerts[k]->x - bullVerts[n]->x, bullVerts[k]->y - bullVerts[n]->y)); asteroidEdges.insert(new Vector2D(asteroids[i]->vertices[k]->x - asteroids[i]->vertices[n]->x, asteroids[i]->vertices[k]->y - asteroids[i]->vertices[n]->y)); } for (unsigned int k = 0; k < asteroidEdges.size(); k++) { Vector2D *axis = asteroidEdges[k]->getPerpendicular(); min1 = max1 = axis->dotProduct(asteroids[i]->vertices[0]); for (unsigned int l = 1; l < asteroids[i]->vertices.size(); l++) { float test = axis->dotProduct(asteroids[i]->vertices[l]); min1 = (test < min1) ? test : min1; max1 = (test > max1) ? test : max1; } min2 = max2 = axis->dotProduct(bullVerts[0]); for (unsigned int l = 1; l < bullVerts.size(); l++) { float test = axis->dotProduct(bullVerts[l]); min2 = (test < min2) ? test : min2; max2 = (test > max2) ? test : max2; } delete axis; axis = NULL; if ( (min1 - max2) > 0 || (min2 - max1) > 0 ) { realCollision = false; break; } else { realCollision = true; } } if (realCollision == false) { for (unsigned int k = 0; k < bullEdges.size(); k++) { Vector2D *axis = bullEdges[k]->getPerpendicular(); min1 = max1 = axis->dotProduct(asteroids[i]->vertices[0]); for (unsigned int l = 1; l < asteroids[i]->vertices.size(); l++) { float test = axis->dotProduct(asteroids[i]->vertices[l]); min1 = (test < min1) ? test : min1; max1 = (test > max1) ? test : max1; } min2 = max2 = axis->dotProduct(bullVerts[0]); for (unsigned int l = 1; l < bullVerts.size(); l++) { float test = axis->dotProduct(bullVerts[l]); min2 = (test < min2) ? test : min2; max2 = (test > max2) ? test : max2; } delete axis; axis = NULL; if ( (min1 - max2) > 0 || (min2 - max1) > 0 ) { realCollision = false; break; } else { realCollision = true; } } } if (realCollision) { player.bullets.remove(j); int numAsteroids; float newDegree; srand ( j + asteroidBox.x ); if ( asteroids[i]->degree == 90.0f ) { if ( rand() % 2 == 1 ) { numAsteroids = 3; newDegree = 30.0f; } else { numAsteroids = 2; newDegree = 45.0f; } for ( int k = 0; k < numAsteroids; k++) asteroids.insert(new Asteroid(asteroidBox.x + (10 * k), asteroidBox.y + (10 * k), newDegree)); } delete asteroids[i]; asteroids.remove(i); } while (bullVerts.size()) { delete bullVerts[0]; bullVerts.remove(0); } while (bullEdges.size()) { delete bullEdges[0]; bullEdges.remove(0); } while (asteroidEdges.size()) { delete asteroidEdges[0]; asteroidEdges.remove(0); } } } } } } bullEdges is a list of vectors of the edges of a bullet, asteroidEdges is similar, and bullVerts and asteroids[i].vertices are, obviously, lists of vectors of each vertex for the respective bullet or asteroid. Honestly, I'm not looking for code corrections, just a fresh set of eyes.

    Read the article

  • PHP Help with "if" statement to dynamically include files

    - by Adrian M.
    Hello, I have these files: "id_1_1.php", "id_1_2.php", "id_1_3.php" etc "id_2_1.php", "id_2_2.php", "id_2_3.php" etc the number of files is not known because will always grow.. all the files are in same directory.. I want to make a if statement: to include the files only if their name ends with "_1" another function to load all the files that start with "id_1" How can I do this? Thank you!

    Read the article

  • Help with infrequent segmentation fault in accessing struct

    - by Sarah
    I'm having trouble debugging a segmentation fault. I'd appreciate tips on how to go about narrowing in on the problem. The error appears when an iterator tries to access an element of a struct Infection, defined as: struct Infection { public: explicit Infection( double it, double rt ) : infT( it ), recT( rt ) {} double infT; // infection start time double recT; // scheduled recovery time }; These structs are kept in a special structure, InfectionMap: typedef boost::unordered_multimap< int, Infection > InfectionMap; Every member of class Host has an InfectionMap carriage. Recovery times and associated host identifiers are kept in a priority queue. When a scheduled recovery event arises in the simulation for a particular strain s in a particular host, the program searches through carriage of that host to find the Infection whose recT matches the recovery time (double recoverTime). (For reasons that aren't worth going into, it's not as expedient for me to use recT as the key to InfectionMap; the strain s is more useful, and coinfections with the same strain are possible.) assert( carriage.size() > 0 ); pair<InfectionMap::iterator,InfectionMap::iterator> ret = carriage.equal_range( s ); InfectionMap::iterator it; for ( it = ret.first; it != ret.second; it++ ) { if ( ((*it).second).recT == recoverTime ) { // produces seg fault carriage.erase( it ); } } I get a "Program received signal EXC_BAD_ACCESS, Could not access memory. Reason: KERN_INVALID_ADDRESS at address..." on the line specified above. The recoverTime is fine, and the assert(...) in the code is not tripped. As I said, this seg fault appears 'randomly' after thousands of successful recovery events. How would you go about figuring out what's going on? I'd love ideas about what could be wrong and how I can further investigate the problem.

    Read the article

  • Help with iphone dev - beyond bounds error

    - by dusk
    I'm just learning iphone development, so please forgive me for what is probably a beginner error. I've searched around and haven't found anything specific to my problem, so hopefully it is an easy fix. The book has examples of building a table from data hard coded via an array. Unfortunately it never really tells you how to get data from a URL, so I've had to look that up and that is where my problems show up. When I debug in xcode, it seems like the count is correct, so I don't understand why it is going out of bounds? This is the error message: 2010-05-03 12:50:42.705 Simple Table[3310:20b] *** Terminating app due to uncaught exception 'NSRangeException', reason: '*** -[NSCFArray objectAtIndex:]: index (1) beyond bounds (0)' My URL returns the following string: first,second,third,fourth And here is the iphone code with the book's working example commented out #import "Simple_TableViewController.h" @implementation Simple_TableViewController @synthesize listData; - (void)viewDidLoad { /* //working code from book NSArray *array = [[NSArray alloc] initWithObjects:@"Sleepy", @"Sneezy", @"Bashful", @"Bashful", @"Happy", @"Doc", @"Grumpy", @"Thorin", @"Dorin", @"Norin", @"Ori", @"Balin", @"Dwalin", @"Fili", @"Kili", @"Oin", @"Gloin", @"Bifur", @"Bofur", @"Bombur", nil]; self.listData = array; [array release]; */ //code from interwebz that crashes NSString *urlstr = [[NSString alloc] initWithFormat:@"http://www.mysite.com/folder/iphone-test.php"]; NSURL *url = [[NSURL alloc] initWithString:urlstr]; NSString *ans = [NSString stringWithContentsOfURL:url]; NSArray *listItems = [ans componentsSeparatedByString:@","]; self.listData = listItems; [urlstr release]; [url release]; [ans release]; [listItems release]; [super viewDidLoad]; } - (void)didReceiveMemoryWarning { // Releases the view if it doesn't have a superview. [super didReceiveMemoryWarning]; // Release any cached data, images, etc that aren't in use. } - (void)viewDidUnload { // Release any retained subviews of the main view. // e.g. self.myOutlet = nil; self.listData = nil; [super viewDidUnload]; } - (void)dealloc { [listData release]; [super dealloc]; } #pragma mark - #pragma mark Table View Data Source Methods - (NSInteger)tableView:(UITableView *)tableView numberOfRowsInSection:(NSInteger)section { return [self.listData count]; } - (UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath { static NSString *SimpleTableIdentifier = @"SimpleTableIdentifier"; UITableViewCell *cell = [tableView dequeueReusableCellWithIdentifier:SimpleTableIdentifier]; if (cell == nil) { cell = [[[UITableViewCell alloc] initWithStyle:UITableViewCellStyleDefault reuseIdentifier:SimpleTableIdentifier] autorelease]; } NSUInteger row = [indexPath row]; cell.textLabel.text = [listData objectAtIndex:row]; return cell; } @end

    Read the article

  • Row level user permissions, help with design

    - by bambam
    Hi, Say I am creating a forums application, I understand how to design a forum level permission system with Groups. i.e. you create a forum to group mapping, and assign users to a group to give them access to a particular forum. How can I refine the permissions to allow for row level permissions (or in forum terms, post level).

    Read the article

  • Help needed Using C File In Project, iPhone

    - by Stumf
    Hello all, I am new to all this, but here goes: There is an apple file that I would like to use parts of for my app. It is called BatteryTimeRemaining.c. http://www.opensource.apple.com/source/PowerManagement/PowerManagement-211/pmconfigd/BatteryTimeRemaining.c I want to be able to use some of the calculations in it, the problem being I don't to know how to add and use it properly. I get countless errors e.g. undeclared: first use of this function. Do I need to add all the header files which are included in the .c file? Do I compile it and then add? Many thanks, Stuart

    Read the article

  • Help needed in grokking password hashes and salts

    - by javafueled
    I've read a number of SO questions on this topic, but grokking the applied practice of storing a salted hash of a password eludes me. Let's start with some ground rules: a password, "foobar12" (we are not discussing the strength of the password). a language, Java 1.6 for this discussion a database, postgreSQL, MySQL, SQL Server, Oracle Several options are available to storing the password, but I want to think about one (1): Store the password hashed with random salt in the DB, one column Found on SO and elsewhere is the automatic fail of plaintext, MD5/SHA1, and dual-columns. The latter have pros and cons MD5/SHA1 is simple. MessageDigest in Java provides MD5, SHA1 (through SHA512 in modern implementations, certainly 1.6). Additionally, most RDBMSs listed provide methods for MD5 encryption functions on inserts, updates, etc. The problems become evident once one groks "rainbow tables" and MD5 collisions (and I've grokked these concepts). Dual-column solutions rest on the idea that the salt does not need to be secret (grok it). However, a second column introduces a complexity that might not be a luxury if you have a legacy system with one (1) column for the password and the cost of updating the table and the code could be too high. But it is storing the password hashed with a random salt in single DB column that I need to understand better, with practical application. I like this solution for a couple of reasons: a salt is expected and considers legacy boundaries. Here's where I get lost: if the salt is random and hashed with the password, how can the system ever match the password? I have theory on this, and as I type I might be grokking the concept: Given a random salt of 128 bytes and a password of 8 bytes ('foobar12'), it could be programmatically possible to remove the part of the hash that was the salt, by hashing a random 128 byte salt and getting the substring of the original hash that is the hashed password. Then re hashing to match using the hash algorithm...??? So... any takers on helping. :) Am I close?

    Read the article

  • Help passing reference to class subroutine in Perl.

    - by stephenmm
    I am trying to pass a routine to another subroutine within a Perl module. But when I pass the sub reference the passed in ref no longer has the object data. Maybe its not possible to do it this way. The line I have a question about is the "unless" lines below: sub get_flag_end { my $self = shift; return ( -e "$self->{file}" ); } sub wait_for_end { my $self = shift; my $timeout = shift; my $poll_interval = shift; # Is it even possible to pass the oject subroutine and retain the objects data? #unless ( $self->timeout( $timeout, $poll_interval, $self->get_flag_end ) ) { # does not work unless ( $self->timeout( $timeout, $poll_interval, \&get_flag_end ) ) { # call happens but members are empty die "!!!ERROR!!! Timed out while waiting for wait_for_end: timeout=$timeout, poll_interval=$poll_interval \n"; } } sub timeout { my $self = shift; my $timeout = shift; my $poll_interval = shift; my $test_condition = shift; until ($test_condition->() || $timeout <= 0) { $timeout -= $poll_interval; sleep $poll_interval; } return $timeout > 0; # condition was met before timeout } I know that I could change the "get_flag_end" routine to take the value as an argument to the subroutine but what if there was a bunch of stuff done in "get_flag_end" and I needed more members from the object. I simplified the code a bit to make it a little easier to follow.

    Read the article

  • Help with animating an element in jQuery

    - by alex
    I have an unordered list with a few list elements. #tags { width: 300px; height: 300px; position: relative; border: 1px solid red; list-style: none none; } #tags li { position: absolute; background: gray; } I have also started writing a jQuery plugin to animate the list elements. So far, I place the list elements randomly in the parent container, and choose a random font size for the text. My next step (which I am a bit stuck on) is to animate the list elements... essentially, I want the list elements to do something like this Slide from left to right whilst getting slightly larger up to the middle and then dropping in size back to normal when it hits the right border. Then, it should do the same in reverse, however it should also set a negative 'z-index' and maybe fade in opacity a bit. The first bit I'm really stuck on, is how to determine if the element is near the middle, in a way that I can have a value that starts at 0.1 on the far left hand size and is 1 in the middle and then back to 0.1 on the far right hand size. Basically, I want them to appear as if they are going around in a faux 3D circle into the page. Then I could do something like this $(this).css({ fontSize: percentageTowardsMiddle * 14, }); Do you know how I could do this? Thanks

    Read the article

  • WCF Troubleshooting from ASP.NET Client -- Help!

    - by Kobojunkie
    I am trying to call a method in my service that is as below, from an ASP.NET application. public bool ValidateUser(string username, string password) { try { // String CurrentLoggedInWindowsUserName = WindowsIdentity.GetCurrent().Name; // //primary identity of the call // String CurrentServiceSecurityContextPrimaryIdentityName = // ServiceSecurityContext.Current.PrimaryIdentity.Name; // } catch (Exception ex) { FaultExceptionFactory fct = new FaultExceptionFactory(); throw new FaultException<CustomFaultException>(fct.CreateFaultException(ex)); } return false; } The Config for the client end of my service is as below <binding name="WSHttpBinding_IMembershipService" closeTimeout="00:01:00" openTimeout="00:01:00" receiveTimeout="00:10:00" sendTimeout="00:01:00" bypassProxyOnLocal="false" transactionFlow="false" hostNameComparisonMode="StrongWildcard" maxBufferPoolSize="524288" maxReceivedMessageSize="65536" messageEncoding="Text" textEncoding="utf-8" useDefaultWebProxy="false" allowCookies="false"> <readerQuotas maxDepth="32" maxStringContentLength="8192" maxArrayLength="16384" maxBytesPerRead="4096" maxNameTableCharCount="16384" /> <reliableSession ordered="true" inactivityTimeout="00:10:00" enabled="false" /> <security mode="Message"> <transport clientCredentialType="Windows" proxyCredentialType="None" realm="" /> <message clientCredentialType="Windows" negotiateServiceCredential="true" algorithmSuite="Default" establishSecurityContext="true" /> </security> </binding> Problem I keep having is when I call it; I get the following exception message. Server Error in '/' Application. The communication object, System.ServiceModel.Channels.ServiceChannel, cannot be used for communication because it is in the Faulted state. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.ServiceModel.CommunicationObjectFaultedException: The communication object, System.ServiceModel.Channels.ServiceChannel, cannot be used for communication because it is in the Faulted state. Stack Trace: [CommunicationObjectFaultedException: The communication object, System.ServiceModel.Channels.ServiceChannel, cannot be used for communication because it is in the Faulted state.] System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg) +7596735 System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type) +275 System.ServiceModel.ICommunicationObject.Close(TimeSpan timeout) +0 System.ServiceModel.ClientBase`1.System.ServiceModel.ICommunicationObject. Close(TimeSpan timeout) +142 System.ServiceModel.ClientBase`1.Close() +38 System.ServiceModel.ClientBase`1.System.IDisposable.Dispose() +4 Controls.Membership.accountLogin.ValidateUserCredentials(String UserName, String Password) in C:\ Petition.WebClient\Controls\ Membership\accountLogin.ascx.cs:49 Controls.Membership.accountLogin.Login1_Authenticate(Object sender, AuthenticateEventArgs e) in C:\ WebClient\ Controls\Membership \accountLogin.ascx.cs:55 I am not entirely sure why I keep getting this. Just in case, here is how I call my service from the client private bool ValidateUserCredentials(string UserName, string Password) { bool boolReturnValue = false; using(Members.MembershipServiceClient client = new Controls.Members.MembershipServiceClient()) { try { boolReturnValue = client.ValidateUser(UserName, Password); } catch (FaultException<CustomFaultException> ex) { throw ex; } } return boolReturnValue; } Anyone have any idea what I need to do in this case?

    Read the article

  • Union and If Exists - not working together - Please help

    - by needshelp
    I need to get dummy values if they do no rows returned from table. The If exists works by itself, but gives error with a Union. Can someone please guide me with a solution or a workaround? create table test1 (col1 varchar(10)) create table test2 (col1 varchar(10)) create table test3 (col1 varchar(10)) insert test1 values ('test1-row1') insert test1 values ('test1-row2') insert test2 values ('test2-row1') insert test2 values ('test2-row2') select col1 from test1 union select col1 from test2 union if exists (select * from test3) select col1 from test3 else select 'dummy'

    Read the article

  • help me pick the right iPhone audio class - MPMoviePlayer vs AVAudioPlayer vs MPMusicPlayer

    - by huevos de oro
    Does anyone know of a good tutorial on the distinction between the MPMoviePlayer vs AVAudioPlayer vs MPMusicPlayer? I want to play audio from an mp3 file available at an external URL. Ideally it is played in an iPod-like audio view. I toyed with MPMoviePlayer but it appears to be more suitable for video, as when audio starts a "movie playing" message displays, the controls disappear and a white quicktime splash page displays. I would like the standard ipod audio controls to display all the time, and to customize the image behind them.

    Read the article

  • Help Reading Binary Image Data from SQL Server into PHP

    - by Joe Majewski
    I cannot seem to figure out a way to read binary data from SQL server into PHP. I am working on a project where I need to be able to store the image directly in the SQL table, not on the file system. Currently, I have been using a query like this one: INSERT INTO myTable(Document) SELECT * FROM OPENROWSET(BULK N'C:\image.jpg', SINGLE_BLOB) as BLAH This works fine to actually insert the image into the table, but I haven't yet figured a way to retrieve it and get my image back. I am doing this with PHP, and ultimately will have to make a stored procedure out of it, but can anyone enlighten me on a way to get that binary data (varbinary(MAX)) and generate an image on the fly. I expected it to be simple to use a SELECT statement and add a content-type to the headers that indicated it was an image, but it's simply not working. Instead, the page will just display the name of the file, which I have encountered in the past and understand it to be an error with the image data.

    Read the article

  • Help Finding Memory Leak

    - by Neal L
    Hi all, I am writing an iPad app that downloads a rather large .csv file and parses the file into objects stored in Core Data. The program keeps crashing, and I've run it along with the Allocations performance tool and can see that it's eating up memory. Nothing is alloc'ed or init'ed in the code, so why am I gobbling up memory? Code at: http://pastie.org/955960 Thanks! -Neal

    Read the article

  • Dynamic Form Help for PHP and MySQL

    - by Tony
    The code below works as far as inserting records from a file into MySQL, but it only does so properly if the columns in the file are already ordered the same way as in the database. I would like for the user to be able to select the drop down the corresponds to each column in their file to match it up with the columns in the database (the database has email address, first name, last name). I am not sure how to accomplish this. Any ideas? <?php $lines =file('book1.csv'); foreach($lines as $data) { list($col1[],$col2[],$col3[]) = explode(',',$data); } $i = count($col1); if (isset($_POST['submitted'])) { DEFINE ('DB_USER', 'root'); DEFINE ('DB_PASSWORD', 'password'); DEFINE ('DB_HOST', 'localhost'); DEFINE ('DB_NAME', 'csvimport'); // Make the connection: $dbc = @mysqli_connect (DB_HOST, DB_USER, DB_PASSWORD, DB_NAME); for($d=1; $d<$i; $d++) { $q = "INSERT into contacts (email, first, last) VALUES ('$col3[$d]', '$col1[$d]', '$col2[$d]')"; $r = @mysqli_query ($dbc, $q); } } echo "<form action =\"handle2.php\" method=\"post\">Email<br /> <select name =\"email\"> <option value='col1'>$col1[0]</option> <option value='col2'>$col2[0]</option> <option value='col3'>$col3[0]</option> </select><br /><br /> First Name <br /> <select name=\"field2\"> <option value='col1'>$col1[0]</option> <option value='col2'>$col2[0]</option> <option value='col3'>$col3[0]</option> </select><br /><br /> Last Name <br /> <select name=\"field3\"> <option value='col1'>$col1[0]</option> <option value='col2'>$col2[0]</option> <option value='col3'>$col3[0]</option> </select><br /><br /> <input type=\"submit\" name=\"submit\" value=\"Submit\" /> <input type=\"hidden\" name=\"submitted\" value=\"TRUE\" /> </form>"; ?>

    Read the article

  • ObjectDataSource DataObjectTypeName Help. Pass object as parameter

    - by Kettenbach
    I have a partial class (the main class is a LinqToSql generated class) <DataObject(True)> _ Partial Public Class MBI_Contract <DataObjectMethod(DataObjectMethodType.Select, True)> _ Public Shared Function GetCancelableContracts(ByVal dealer As Dealer) As List(Of MBI_Contract) Return Utilities.GetCancelableContractsForDealer(dealer) End Function End Class Here is the method it's calling Public Function GetCancelableContractsForDealer(ByVal dealer As Dealer) As List(Of MBI_Contract) Dim db As TestDataContext = TestDataContext.Create() Return (From mbi As MBI_Contract In db.MBI_Contracts _ Where mbi.MBI_DealerNumber = dealer.DealerNumber _ AndAlso mbi.MBI_PaidFor = True _ AndAlso mbi.MBI_Deleted = False).ToList() End Function I want to use the ObjectDataSource to drive a DropDownList. <asp:ObjectDataSource ID="contractOds" runat="server" TypeName="MBI_Contract" SelectMethod="GetCancelableContracts" DataObjectTypeName="Dealer"> </asp:ObjectDataSource> My aspx page has a Dealer property that is set in a BasePage. My question is how can I pass this property(object) to the ObjectDataSource, so it can be evaluated in my select method. Does anyone know how I can do this? Or am I totally doing this the wrong way? Thanks for any Advice, Cheers, ~ck in San Diego

    Read the article

  • Visual Studio Proj File Help

    - by Alex Baranosky
    I would like to reconfigure the StyleCop import path in my project file. Currently it looks like this: <Import Project="$(ProgramFiles)\MSBuild\Microsoft\StyleCop\v4.3\Microsoft.StyleCop.targets" /> I would like to include the Microsoft.StyleCop.targets file in my project directory, and thus do something like this: <Import Project="$(ProjectDir)\Microsoft.StyleCop.targets" /> Is something like this possible, if so what is the proper way to do it?

    Read the article

  • Help repaiting a Component

    - by serhio
    I am working with Microsoft.VisualBasic.PowerPacks.RectangleShape, but the question is common for components or controls in general. I added to a TextRectangleShape : RectangleShape a Text property: Protected Overrides Sub OnPaint(ByVal e As System.Windows.Forms.PaintEventArgs) MyBase.OnPaint(e) Dim f As Font = Me.Font Dim g As Graphics = e.Graphics Dim textRect As Rectangle = New Rectangle(Me.Location, Me.Size) Using br As New SolidBrush(Me._TextColor) g.DrawString(_Text, f, br, textRect) End Using End Sub Now when I move this control the text does not disappear from the former location. Maybe I could invalidate each time the Parent in the OnPaint, but if this is not a good solution if the parent has a time consuming repaint logic or I have a lot of my custom component moving at the same time. How do I properly repaint the component?

    Read the article

  • Help needed to resolve RMI RemoteException

    - by Gabriel Parenza
    Hello friends, Any idea why do I get RemoteException while trying to invoke methods on Unix machine from Windows. I am inside the network and dont think this is because of firewall problem as I can do "telnet" from Windows to Unix box after starting the RMI server at the unix box. I also could not understand why is it going to local loopback IP? Stack Trace:: RemoteException occured, details java.rmi.ConnectException: Connection refused to host: 127.0.0.1; nested exception is: java.net.ConnectException: Connection refused: connect java.rmi.ConnectException: Connection refused to host: 127.0.0.1; nested exception is: java.net.ConnectException: Connection refused: connect Many thanks in advance.

    Read the article

  • loops and array help

    - by dalton
    public void arrayCalculation(int[][]scores,float[]averages, int[]temp) { int total; for(int a=0; a<5; a++) { for (int b=0; b<5; b++) { scores[a][b] = temp[a+b*5]; } } for(int a = 0; a <5; a++) { total = total + scores[a]; } scores[5][0] = total; } i need to add up the values stored in the first row and store it in the 6th positon in the row

    Read the article

  • mysql query performance help

    - by Stefano
    Hi I have a quite large table storing words contained in email messages mysql> explain t_message_words; +----------------+---------+------+-----+---------+----------------+ | Field | Type | Null | Key | Default | Extra | +----------------+---------+------+-----+---------+----------------+ | mwr_key | int(11) | NO | PRI | NULL | auto_increment | | mwr_message_id | int(11) | NO | MUL | NULL | | | mwr_word_id | int(11) | NO | MUL | NULL | | | mwr_count | int(11) | NO | | 0 | | +----------------+---------+------+-----+---------+----------------+ table contains about 100M rows mwr_message_id is a FK to messages table mwr_word_id is a FK to words table mwr_count is the number of occurrencies of word mwr_word_id in message mwr_message_id To calculate most used words, I use the following query SELECT SUM(mwr_count) AS word_count, mwr_word_id FROM t_message_words GROUP BY mwr_word_id ORDER BY word_count DESC LIMIT 100; that runs almost forever (more than half an hour on the test server) mysql> show processlist; +----+------+----------------+--------+---------+------+----------------------+----------------------------------------------------- | Id | User | Host | db | Command | Time | State | Info +----+------+----------------+--------+---------+------+----------------------+----------------------------------------------------- processlist | 41 | root | localhost:3148 | tst_db | Query | 1955 | Copying to tmp table | SELECT SUM(mwr_count) AS word_count, mwr_word_id FROM t_message_words GROUP BY mwr_word_id | +----+------+----------------+--------+---------+------+----------------------+----------------------------------------------------- 3 rows in set (0.00 sec) Is there anything I can do to "speed up" the query (apart from adding more ram, more cpu, faster disks)? thank you in advance stefano

    Read the article

  • Help with pyHook error.

    - by Shady
    Hey, I'm trying to make a global hotkey with pyhook in python that is supposed to work only with the alt key pressed. here is the source: import pyHook import pythoncom hm = pyHook.HookManager() def OnKeyboardEvent(event): if event.Alt == 32 and event.KeyID == 49: print 'HERE WILL BE THE CODE' hm.KeyDown = OnKeyboardEvent hm.HookKeyboard() pythoncom.PumpMessages() but when I execute, only works with the second press of the second key (number 1 = 49)... and give this error: http://img580.imageshack.us/img580/1858/errord.png How can I solve it? For work at the first pressed time.

    Read the article

< Previous Page | 121 122 123 124 125 126 127 128 129 130 131 132  | Next Page >