Search Results

Search found 13047 results on 522 pages for 'np hard'.

Page 126/522 | < Previous Page | 122 123 124 125 126 127 128 129 130 131 132 133  | Next Page >

• Recovering a Windows XP License key

  - by Fortyrunner

  I threw out a Windows XP machine a while ago (the motherboard failed). I kept the hard drive and the XP installation media. Problem is the license key was on a sticker on the machine - doh! The original manufacturer has gone bust (Evesham) and I suspect that Microsoft will be of little help. Is there any easy way to get the license key off the hard disk? Can I just find the file with the registry data in it and get the key using a hex editor? I really need a spare XP key for use in a Windows VM.

  Read the article

• Allow WRITE access to local folders machine in 2003SBS AD

  - by Dan M.

  Have a SBS2003 client with a mess of a domain that is in process of being cleaned. But, for the life of me I cannot find a setting that will allow write access to the local hard disk for domain users with redirected profiles(to the server). This is needed only for one program that will not follow a symbolic link to the network path, instead it seems to be hard coded to the %appdata% folder but only on the c: drive.... So question is how can I allow "Domain users" write access to the local %appdata% directory? I have tried setting it manually on a machine but it kept resetting to RO no matter how many times I tried. Every time I would un-check the RO property it would reset sometime right after i hit OK. Thanks in advance! Dan

  Read the article

• Unable to boot fedora 11

  - by csunwold

  I have been running fedora 11 for several months without a hiccup, but two days ago I ran "yum update" and installed whatever updates were available (I didn't pay attention to what they were). I was having problems with mysql so I tried "yum remove mysql" and then it removed mysql as well as quite a few unexpected dependencies. I then "yum install mysql" without a hitch and went about my way. However, when I next booted up my machine it got to "Starting preload dameon [OK]" and then it hangs with a flashing cursor on the screen. I tried following http://dailypackage.fedorabook.com/i...ling-Grub.html but it didn't seem to make any difference. I put a new hard drive with WinXP on it into the same machine that I booted to, and I tried to use Ext2 Installable File System for Windows but when I run it, it only seems to see /boot and nothing else on the hard drive. Any ideas?

  Read the article

• Read/WRITE/Verify disk diagnostic tool for Mac OS X?

  - by Spiff

  It seems that there are many tools out there for Mac OS X that test a hard drive for bad blocks by doing a Read/Verify pass. That is, they read a block, then read it a second time, and verify that both reads yielded the same results. I need a tool that does a non-destructive Read/Write/Verify pass. It should read each block, write those same contents back out, and then read it again to verify. That way every block gets written, giving the hard drive a chance to spare out bad blocks. But since the same contents that were just read get written back out, it doesn't destroy data that wasn't already lost. I'm aware of several tools that can do Read/Verify, but I'm not aware of any that do Read/Write/Verify. Are there any tools that do what I want? Unix / open source tools that compile and run on Mac OS X are fair game too.

  Read the article

• Seasgate GoFlex NAS + Horrible Speed = Bad Experience

  - by Jon H

  I am having issues with transfer speeds from my desktop PC to my NAS. I have my NAS hooked up to a Gigabit Gateway as well as my Desktop with Cat 5e. I see up to 4.0 MB/Second Transfer Rates, the normal is about 2.5 MB/Seconds. There is 3 Partitions on my NAS, Public, Private, Backup. When I transfer from Private to Public I see the speeds above. If its under the same partition almost instant. I was wondering if the speeds I am seeing is in due to my Computer or the NAS. I was looking into building my own Media Server in due to these horrible speeds. Is their anything I can do in the mean time to speed this up? Motherboard = M3970AM-HP (Angelica) Processor = AMD FX 6100 Ram = 10GB PC3-10600 MB/sec Hard Drive (1) = 1.5TB SATA 3.0GB 5400RPM Hard Drive (2) = 120GB SATA SSD NAS = Seagate 3TB Go Flex Home Connection (1) = 1000 Base T Connection (2) = Wireless N

  Read the article

• How to properly store dotfiles in a centralized git repository

  - by asmeurer

  I'd like to put all my dotfiles (like .profile, .gitconfig, etc.) in a central git repository, so I can more easily keep track of the changes. I did this, but I would like to know how to properly handle keeping them in sync with the actual ones in ~/. I thought that you could just hard link the two using ln, but this does not seem to work as I expected, i.e., if I edit one file, the other does not change. Maybe I misused the ln command, or else I misunderstand how hard links work. How do people usually do this? Judging by GitHub, it's a pretty popular thing to do, so surely there's a seamless way to do it that someone has come up with. By the way, I'm on Mac OS X 10.6.

  Read the article

• Backup and restore.

  - by Xavierjazz

  I have a Thinkpad T60 with a 150GIg internal hard drive. XP Pro SP3. I also have a similar hard drive that used to be in another laptop connected via USB. It contains only data. I have cleared out a lot of duplicate files and now would like to back both up. I have Retrospect and a brand new 1Tbyte drive for this purpose. Can I back up the whole computer (both drives) but, in case only one fails, can I just restore that drive or do I have to restore both drives at the same time? I don't understand how partitions work so might I be able to partition the 1T drive and restore each smaller drive independently? Thanks.

  Read the article

• Viewing and deleting partitions using the BIOS?

  - by cluelesscoder

  I have an M4A785TD-M EVO Asus motherboard which uses Asus Express Gate for its motherboard (says American Megatrends, Inc at the bottom). I activate it by pressing Del; also says Tab activates BIOS Post but that doesn't seem to do anything. I went into this expecting to see a breakdown of the partitions. I have a 300GB hard-drive separated into 3 partitions. While it does show SATA for my main hard-drive and my disk drive, it doesn't show the partitions. Is this typical? Do I have to us an OS-based tool to delete the partitions or can I delete using my BIOS? I tried updating the BIOS through Asus's Update utility but it appears to be broken (connects/disconnects repeatedly). I used HWiNFO32 to get some information: BIOS Date: 06/30/10 BIOS Version: 2103 EFI BIOS: Not Capable Tried to update but it directs me to biosagentsplus.com which wants $30 for the download (another question would be how to avoid them).

  Read the article

• balancing loudest and quietest speaker noises

  - by Dan

  It is hard for me to find the right volume for my computer to watch my dvd's on because it seems like most reasonable volumes become overwhelming at the loudest parts of a movie and it is hard to even make out the dialog at the quietest parts. I find I'm constantly adjusting the volume during the course of a movie. Are there ways to make the difference between the louds and the quiets not so extreme? (both computer related solutions and non-computer related solutions welcome). Like moving my speakers across the room and increasing the volume? or the opposite? Or would would the extremes be less noticeable if I used headphones? Are there movie players that might have more complex sound adjustment features? If there is a software solution out there for linux that would be great too. Thanks, Dan

  Read the article

• NFS mount mounted inside another NFS mount disappears randomly

  - by espenfjo

  I have quite an odd issue where my nested NFS mounts just disappear randomly from time to time. The fstab entries look somewhat like this: nfs:/home /home/nfs rw,hard,intr,rsize=32768,noatime,nocto,proto=tcp 0 0 nfs:/bigdir /home/bigdir nfs rw,hard,intr,rsize=32768,noatime,nocto,proto=tcp,bg 0 0 The issue is that from time to time the "/home/bigdir" folder will be empty, even though mtab think that the share is still mounted. nfsstat et. al. do also think the share is still mounted. Only thing that works is by unmounting, and then (re)mounting the bigdir share. The server side is a NetApp. The client side is RHEL5.5, 2.6.18-194 kernel (Yes, I know 5.8 is out, but as far as I can see there are no erratas for this particular issue). I can use various hacks like automount, or mounting it to another path and then using --mount bind, but I would like to fix the underlying issue. -- Best regards Espen Fjellvær Olsen

  Read the article

• Home Server restore fails cannot find boot device

  - by Tim Heuer

  I am using Windows Home Server to backup my PCs. I recently had a hard drive failure on one of my WHS connected PCs and obtained an identical sized/speed drive for my laptop. I used the latest home server restore CD and did the restore. It said it completed successfully. Upon reboot, it says 'cannot find boot device' and lists all my drives (hard drive, cd, network book) indicating no valid operating system was found. I boot using the Win7 repair disk and while it doesn't see the operating system, it sees the drive and if I go into a command prompt, I can see all my data on the drive. My laptop is Windows 7 64-bit Ultimate. I've tried most everything I can think of. I'm a technical user (software developer) so I'm pretty aware of how things work (or should). I don't feel like I'm missing a simple step here.

  Read the article

• MacBook Refuses to Boot

  - by pas09

  I have a MacBook that has unfortunately died on me. I randomly got a pop up message that said I needed to restart my computer, and once I did, I was greeted with the blinking folder question mark start up screen. I've tried everything, including running Disk Utility repair and reformatting the hard drive and reinstalling OS X. All of my data is backed up and safe, I just need my computer to start again. Before I go off and buy a new hard drive, I wanted to see if there is anything I might have forgotten.

  Read the article

• Gparted: Copy Greyed Out

  - by David

  I booted my system to a gparted linux live CD and I have two partitions: /dev/sda1 /dev/sda2 I want to move both of them to my new physical hard drive (called /dev/sdb). When I right click on /dev/sda1, I can choose copy and then paste it onto /dev/sdb. When I right click on /dev/sda2, copy is greyed out and there is a yellow exclamation point to the left of the disk. I know that the disk works since I can boot my computer from it. Why won't gparted let me copy /dev/sda2 to my new hard disk? Since the option is greyed out, I don't even get an error message. Thanks!

  Read the article

• Planning to buy a server with at least 48GB Ram, are the blades way to go?

  - by varchar1

  We're planning to host our website for the first time for ourselves. We have currently have a linode of 8 gigs and the memory is going up to 90% most of the time. So I want to move my website to my own server with huge RAM. So this will be first time to manage any physical hardware of a server. So I came across IBM's BladeCenter, found them interesting. So can I just buy the blade and run it? Or do I have to buy the chassis for sure? Also, do I need to buy an UPS? So how hard is it to setup? How about the hard drives? Can I setup them easily? Please advice.

  Read the article

• ESXi 4.0u1 - backup/copy options

  - by Hanadarko

  I have a machine built using ESXi 4.0u1 and it has 3 hard drives. I have my hosts built on different hard drives but wondering about backup options. I do not have RAID but I have 3 drives and 1 is totally empty. I had been using it to store ISOs for loading. So what options do I have to either create a 1 time copy onto the spare drive or some sort of snapshot to the spare drive? - There must be some way to do this either via the vsphere client or ssh into the ESXi box and go from there. Thoughts? -JD

  Read the article

• increase performance of virtual machines on the 27" imac

  - by evan

  I'm using a 27" iMac (i7, 8GB RAM) at work and normally run two or three virtual machines at the same time, which hurts the performance of each virtual machine. I've learned on these forums the best way to increase virtual machine performance (aside from RAM) is to have them running on a separate hard drive from the one the OS is on. Of course with the iMac you can only have one hard drive and not even an SAS or solid state drive (well you could probably take it apart and put one in yourself but I wouldn't be permitted to do that). That being said, do you think it would help to run one or more virtual machines from a firewire external drive (or a usb 2.0)? Thanks for your input!

  Read the article

• Problem with USB drivers (Windows-XP)

  - by Carl

  I obtained the drivers from the manufacturer for my HT-Link NEC USB 2.0 2-port Cardbus card. When I plugged in the card before I got the drivers, 3 new entries showed up in the Device Manager - two "NEC PCI to USB Open Host Controller" and one "Standard Enhanced PCI to USB Host controller." With the card plugged in, I uninstalled those two drivers. I then removed the card. I copied the new drivers to c:\windows\system32\drivers and the .inf file to c:\windows\inf. I also copied the drivers & inf to a new directory called c:\windows\drivers\ousb2. I reinserted the card. Windows automatically installed the same drivers as before. I selected 'update driver' on the "NEC PCI to USB..." entry and didn't see any other options. I then selected 'have disk' and pointed to c:\windows\drivers\ousb2 and got a message "The specified location does not contain information about your hardware." I then selected 'update driver' on the "Standard Enhanced PCI to USB...," and manually selected "USB 2.0 Enhanced Host Controller" (OWC 4/15/2003 2.1.3.1). Windows then automatically found a USB root hub, and I manually selected "USB 2.0 Root Hub Device" (OWC 4/15/2003 2.1.3.1). Now there are two sections in the Device Manager titled "Universal Serial Bus controllers." I plugged in my external USB hard disk adapter, and "USB Mass Storage Device" was added to the first set. Here's how it looks (w/drivers from the properties): [Universal Serial Bus controllers] Intel(R) 82801DB/DBM USB 2.0 Enhanced Host Controller - 24CD (6/1/2002 5.1.2600.0) Intel(R) 82801DB/DBM USB Universal Host Controller - 24C2 (7/1/2001 5.1.2600.5512) Intel(R) 82801DB/DBM USB Universal Host Controller - 24C4 (7/1/2001 5.1.2600.5512) Intel(R) 82801DB/DBM USB Universal Host Controller - 24C7 (7/1/2001 5.1.2600.5512) NEC PCI to USB Open Host Controller (7/1/2001 5.1.2600.5512) NEC PCI to USB Open Host Controller (7/1/2001 5.1.2600.5512) USB Mass Storage Device USB Root Hub (7/1/2001 5.1.2600.5512) (5 more USB Root Hubs - same driver) [Universal Serial Bus controllers] USB 2.0 Enhanced Host Controller (OWC 4/15/2003 2.1.3.1) USB 2.0 Root Hub Device (OWC 4/15/2003 2.1.3.1) When I unplug the card the two "NEC PCI to USB..." entries in the first set disappear, and the whole second set disappears. (I unplugged the hard disk adapter first...) The hard disk adapter still doesn't work in that Cardbus card with the new drivers. I don't think the above looks right - a second set of USB controllers listed in the Device Manager, and the NEC entries still in the first set, and the the USB mass storage device still in the first set. Any help appreciated. (Windows XP PRO SP3 w/all current updates.)

  Read the article

• How to Disable secondary drive from booting upon restart - Windows

  - by DevCompany

  I had a Windows 2003 Hard Drive on my server and it went bad so I installed a new clean hard drive and installed Windows 2008 R2 on the new clean drive. I moved the old 2003 drive to be used only for general storage on the same computer. It usually boots into Windows 2008 upon a restart, but just sometimes it starts trying to boot the old 2003 drive and causes boot issues(NTDLR Bootloader, and other errors), even though the order of boot preference is set to boot 2008, and NOT 2003. I need to know how to remove any old code that keeps this old drive as a bootable drive. I still want to use it as a secondary drive just dont want to have any boot code on it. hopefully my situation is clear for everyone to get a good response. Thank you...

  Read the article

• Slow LAN transfer from 3rd party computer

  - by Chris

  Hi Everyone, I've got an odd problem that I'm not really sure where to start the troubleshooting process. I have a 'server' with Windows Server 2008R2 (64-bit) installed and it has a couple of hard drives. If I Remote Desktop into the server and transfer files from one HD to the other, all it fine. If however, I use my workstation (Windows 7 64bit) and open up a shared resource on the server and transfer a file from one hard drive on the server to another HD on the server (not using Remote Desktop, just Windows explorer/Network places), the transfer crawls... It takes about 5mins to discover files/calculate the transfer and then starts transferring at speeds like 56KB/s - 200KB/s. Both machines have Marvel GigE network ports with a TrendNet 8-port green GigE switch. I've set Jumbo packets to 9K on both machines...

  Read the article

• Allow READ access to local folders in 2003SBS AD

  - by Dan M.

  Have a SBS2003 client with a mess of a domain that is in process of being cleaned. But, for the life of me I cannot find a setting that will allow write access to the local hard disk for domain users with redirected profiles(to the server). This is needed only for one program that will not follow a symbolic link to the network path, instead it seems to be hard coded to the %appdata% folder but only on the c: drive.... So question is how can I allow "Domain users" write access to the local %appdata% directory? I have tried setting it manually on a machine but it kept resetting to RO no matter how many times I tried. Everytime I would uncheck the RO property it would reset sometime right after i hit OK. Thanks in advance! Dan

  Read the article

• Should server spare parts be stored in climate controlled storage?

  - by Shane Wealti

  What is a best practice for storing server spares (hard drives, RAM, power supplies, etc) with respect to how/where they are stored? Some options are storing them in climate controlled storage or just a standard warehouse-type stockroom? My understanding is that all other things being equal climate-controlled storage is preferred. What are the risks of storing that type of thing in a non-climate-controlled, somewhat dusty shelving area? Conversely are there risks to storing spares in a climate controlled area? If there are space limitations in climate controlled storage are there some parts, such as hard drives, which should be in climate controlled, while other parts such as power supplies will probably be ok in non climate controlled storage?

  Read the article

• How can I see logs in a server after a kernel panic hang?

  - by Low Kian Seong

  I am running a production gentoo Linux machine, and recently there was a situation where the server hung in my co-located premises and when I got there I noticed that the server was hung on what appeared to be a kernel panic hang. I rebooted the machine with a hard reboot and was disappointed to find out that I could not find a shred of evidence anywhere on why the machine hung. Is it true that when I do a hard reboot the messages itself will get lost or is there a setting I can do somewhere say in syslog-ng or maybe in sysctl to at least preserve the error log so that I can prevent such mishaps from happening in the future ? I am running a 2.6.x kernel by the way. Thanks in advance.

  Read the article

• Development environment for embedded system

  - by Howard Lee Harkness

  I need to develop software in C/C++ for an embedded system. I have Debian 6 running off of a USB hard drive. I would like to be able to generate a stripped-down kernel with modules, and install them either on a CF card or a USB 'thumb' drive. I succeeded in building a Linux 3.6 kernel and running it in Debian off of the USB hard drive, but I am having trouble figuring out how to install it on the thumb drive. I would like a build cycle that looks like this: 1) Build module or kernel with desired software 2) Install it on thumb drive 3) Boot and test I would like to use the same system for both development and testing, if that is feasible. I am looking for resources and tutorials that would help me understand how to do this.

  Read the article

• Windows XP , HP , IntelInside Trobelshooting

  - by Jamil Hneini

  My Windows XP PC has stopped booting. On start up, before Windows boots a screen appears saying: Windows Could Not Boot: Could Not Find or Corrupted file <Windows root>\Sytem32\Hal.dll Please Reinstall the file... From that I understand that I have to reinstall the OS but my computer is so old that I have lost the backup and recovery disk. My Computer's Info: 32Bit Computer Pentium 4 Windows XP Service Pack 2 HP History: My Computer has 4 hard drives 2 internal 40 GB drives (C And D) 2 external 8GB drives (E And F) Additional Info: I need the files inside C And E The computer reads my flash drive as a hard drive (8.45GB)(I have never booted while my USB pluged in while I was troubleshooting) With some test I discovered that the C drive wasn't detected by the computer I have already configured the boot order of BiOS I have Set The SATA to IDE The Question: I have a setup for windows 8 32 bit how can I boot from my USB to run that setup? If that isn't the proper way to handle this problem please tell me the proper way.

  Read the article

• Need help in making my new laptop dual boot with ubuntu 9.10

  - by michael

  Hi, I have a new laptop which comes with window 7. I want to dual-boot it with ubuntu 9.10. I have burned the install disk of 9.10. But during the install process, I am stuck in 'setup my partition'. It has 2 options: wipe out my whole hard disk' or 'manually configure' I don't want it to wipe out my whole hard disk (i want to keep my window 7). But how can I manually configure the partition to use the free space and create a partition so that I can install ubuntu 9.10 and swap space? Thank you.

  Read the article

< Previous Page | 122 123 124 125 126 127 128 129 130 131 132 133  | Next Page >