Search Results

Search found 15295 results on 612 pages for 'gwt hosted mode'.

Page 127/612 | < Previous Page | 123 124 125 126 127 128 129 130 131 132 133 134  | Next Page >

  • Cisco Catalyst 3550 + Alteon 184 Load-Balancing Issues

    - by upkels
    I have just deployed a couple Cisco Catalyst 3550 switches, and a couple Alteon 184 Web Switches for load-balancing. I can ping all RIPs and VIPs to/from the Alteon. Topology Before: (server) <- (Alteon) <- (Internet) Topology Now: (server) <- (3550) <- Alteon <- (Internet) Cisco Port Configuration (Alteon Uplink Port): description LB_1_PORT_9_PRIMARY switchport access vlan 10 switchport mode access switchport nonegotiate speed 100 duplex full Alteon Port 9 Configuration (VLAN 10 WAN): >> Main# /c/port 9/cur Current Port 9 configuration: enabled pref fast, backup gig, PVID 10, BW Contract 1024 name UPLINK >> Main# /c/port 9/fast/cur Current Port 9 Fast link configuration: speed 100, mode full duplex, fctl none, auto off Cisco Configuration (Load-Balanced Servers Port): description LB_1_PORT_1_PRIMARY switchport access vlan 30 switchport mode access switchport nonegotiate speed 100 duplex full Alteon Port 1 Configuration (VLAN 30 LOAD-BALANCED LAN): >> Main# /c/port 1/cur Current Port 1 configuration: enabled pref fast, backup gig, PVID 30, BW Contract 1024 name LB_PORT_1 >> Main# /c/port 1/fast/cur Current Port 1 Fast link configuration: speed 100, mode full duplex, fctl both, auto on Each of my servers are on vlan 10 and 30, properly communicating. I have tried to turn on VLAN tagging on the Alteon, however it seems to cause all communications to stop working. When I tcpdump -i vlan30 on any of the webservers, I see normal ARP communications, and some STP communications, which may or may not be part of the problem: ... 15:00:51.035882 STP 802.1d, Config, Flags [none], bridge-id 801e.00:11:5c:62:fe:80.8041, length 42 15:00:51.493154 IP 10.1.1.254.33923 > 10.1.1.1.http: Flags [S], seq 707324510, win 8760, options [mss 1460], length 0 15:00:51.493336 IP 10.1.1.1.http > 10.1.1.254.33923: Flags [S.], seq 3981707623, ack 707324511, win 65535, options [mss 1460], len gth 0 15:00:51.493778 ARP, Request who-has 10.1.3.1 tell 10.1.3.254, length 46 etc... I'm not sure if I've provided enough information, so please let me know if any more is necessary. Thank you!

    Read the article

  • SSH Keys Authentication keeps asking for password

    - by Rhyuk
    Im trying to set access from ServerA(SunOS) to ServerB(Some custom Linux with Keyboard Interactive login) with SSH Keys. As a proof of concept I was able to do it between 2 virtual machines. Now in my real life scenario it isnt working. I created the keys in ServerA, copied them to ServerB, chmod'd .ssh folders to 700 on both ServerA,B. Here is the log of what I get. debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-ctr hmac-md5 none debug1: kex: client->server aes128-ctr hmac-md5 none debug1: Peer sent proposed langtags, ctos: debug1: Peer sent proposed langtags, stoc: debug1: We proposed langtags, ctos: en-US debug1: We proposed langtags, stoc: en-US debug1: SSH2_MSG_KEX_DH_GEX_REQUEST sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug1: dh_gen_key: priv key bits set: 125/256 debug1: bits set: 1039/2048 debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug1: Host 'XXX.XXX.XXX.XXX' is known and matches the RSA host key. debug1: Found key in /XXX/.ssh/known_hosts:1 debug1: bits set: 1061/2048 debug1: ssh_rsa_verify: signature correct debug1: newkeys: mode 1 debug1: set_newkeys: setting new keys for 'out' mode debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: newkeys: mode 0 debug1: set_newkeys: setting new keys for 'in' mode debug1: SSH2_MSG_NEWKEYS received debug1: done: ssh_kex2. debug1: send SSH2_MSG_SERVICE_REQUEST debug1: got SSH2_MSG_SERVICE_ACCEPT debug1: Authentications that can continue: publickey,keyboard-interactive debug1: Next authentication method: publickey debug1: Trying private key: /XXXX/.ssh/identity debug1: Trying public key: /xxx/.ssh/id_rsa debug1: Authentications that can continue: publickey,keyboard-interactive debug1: Trying private key: /xxx/.ssh/id_dsa debug1: Next authentication method: keyboard-interactive Password: Password: ServerB has pretty limited actions since its a custom propietary linux. What could be happening? EDIT WITH ANSWER: Problem was that I didnt have those settings enabled in the sshd_config (Refer to accepted answer) AND that while pasting the key from ServerA to ServerB it would interpret the key as 3 separate lines. What I did was, in case you cant use ssh-copy-id like I couldnt. Paste the first line of your key in your "ServerB" authorized_keys file WITHOUT the last 2 characters, then type yourself the missing characters from line 1 and the first one from line 2, this will prevent adding a "new line" between the first and second line of the key. Repeat with the 3d line.

    Read the article

  • Save and restore multiple layers within a Photoshop action that flattens

    - by SuitCase
    I'm editing comic pages with layers - "background", "foreground", "lineart" and "over lineart". I have a Photoshop action that includes a Mode-Bitmap command, which requires the image to be flattened. I need this part of the action because I use the Halftone Screen method of reducing the greyscale image to bitmap on the "background" layer, creating a certain effect. I am pretty sure there is no filter or anything else that gives the same effect. After the mode is changed to bitmap, my action changes things back to greyscale for further changes. This poses a problem. I only want to do the bitmap mode change on the background layer, and after I do the change I want to restore the layer structure as it was - with the foreground, lineart and over lineart layers back above the now-halftoned background. My current method of saving these layers and restoring them is clumsy. My action is able to automatically save the "foreground" layer by selecting it, cutting it, then pasting it back in after the mode changing is over. But, for the "ink" and "over ink" layers, I have to manually cut these layers, paste them into a new document, and later re-cut and re-paste after running my action. This is so clunky! What I would like to know is if it's possible to set aside my layers in an automated way, and then bring them back in, also in an automated way. An ugly (but functional) solution would be to replicate my actions of creating new documents and pasting them temporarily there, but I don't think Photoshop allows you to do things outside of your current document with an action. It seems to me that the only way to do what I want is to use the "hack" of incorporating the clipboard into the action as a clever hack, but that leaves me stuck as I have two more layers that can't fit onto that same clipboard. Help or suggestions would be appreciated. I can keep on doing it manually, but to have a comprehensive action would save me a ton of time.

    Read the article

  • Removing HttpModule for specific path in ASP.NET / IIS 7 application?

    - by soccerdad
    Most succinctly, my question is whether an ASP.NET 4.0 app running under IIS 7 integrated mode should be able to honor this portion of my Web.config file: <location path="auth/windows"> <system.webServer> <modules> <remove name="FormsAuthentication"/> </modules> </system.webServer> </location> I'm experimenting with mixed mode authentication (Windows and Forms). Using IIS Manager, I've disabled Anonymous authentication to auth/windows/winauth.aspx, which is within the location path above. I have Failed Request Tracing set up to trace various HTTP status codes, including 302s. When I request the winauth.aspx page, a 302 HTTP status code is returned. If I look at the request trace, I can see that a 401 (unauthorized) was originally generated by the AnonymousAuthenticationModule. However, the FormsAuthenticationModule converts that to a 302, which is what the browser sees. So it seems as though my attempt to remove that module from the pipeline for pages in that path isn't working. But I'm not seeing any complaints anywhere (event viewer, yellow pages of death, etc.) that would indicate it's an invalid configuration. I want the 401 returned to the browser, which presumably would include an appropriate WWW-Authenticate header. A few other points: a) I do have <authentication mode="Forms"> in my Web.config, and that is what the 302 redirects to; b) I got the "name" of the module I'm trying to remove from the inetserv\config\applicationHost.config file; c) I have this element in my Web.config file: <modules runAllManagedModulesForAllRequests="false">; d) I tried a <location> element for the path in which I set the authentication mode to "None", but that gave a yellow exception page that the property can't be set below the application level. Anyone had any luck removing modules in this fashion?

    Read the article

  • Why am I unable to mount my USB drive (unknown partition table)?

    - by Pat
    I'm a real newbie to linux. Anyway the problem is that my USB doesn't get recognized anymore which is really annoying because I need information from it. I've read like a zillion threads how to manually mount it but I really can't it to work. I hope it's just some easy, stupid problem where any of you could help me out quickly.. Here is the syslog: kernel: [ 6872.420125] usb 2-2: new high-speed USB device number 11 using ehci_hcd mtp-probe: checking bus 2, device 11: "/sys/devices/pci0000:00/0000:00:1d.7/usb2/2-2" kernel: [ 6872.556295] scsi8 : usb-storage 2-2:1.0 mtp-probe: bus: 2, device: 11 was not an MTP device kernel: [ 6873.558081] scsi 8:0:0:0: Direct-Access SanDisk Cruzer 8.01 PQ: 0 ANSI: 0 CCS kernel: [ 6873.559964] sd 8:0:0:0: Attached scsi generic sg3 type 0 kernel: [ 6873.562833] sd 8:0:0:0: [sdc] 15682559 512-byte logical blocks: (8.02 GB/7.47 GiB) kernel: [ 6873.564867] sd 8:0:0:0: [sdc] Write Protect is off kernel: [ 6873.564878] sd 8:0:0:0: [sdc] Mode Sense: 45 00 00 08 kernel: [ 6873.565485] sd 8:0:0:0: [sdc] No Caching mode page present kernel: [ 6873.565495] sd 8:0:0:0: [sdc] Assuming drive cache: write through kernel: [ 6873.568377] sd 8:0:0:0: [sdc] No Caching mode page present kernel: [ 6873.568387] sd 8:0:0:0: [sdc] Assuming drive cache: write through kernel: [ 6873.574330] sdc: unknown partition table kernel: [ 6873.576853] sd 8:0:0:0: [sdc] No Caching mode page present kernel: [ 6873.576863] sd 8:0:0:0: [sdc] Assuming drive cache: write through kernel: [ 6873.576871] sd 8:0:0:0: [sdc] Attached SCSI removable disk Thanks in advance

    Read the article

  • Disk operations in windows 7 are slow

    - by Skadlig
    My computer started lagging last Sunday. I tried to reboot it and it failed. Trying to boot into failsafe mode takes around two hours. It mainly freezes on two files: scsiport.sys and classpnp.sys When it finally has started all disc operations are really slow. When it has run for a while it goes faster, probably due to data moved into RAM instead. It froze on an other file before that was associated with Avast but uninstalling it didn't really help. A critical windows update was installed on Sunday but rolling back the update didn't help. I had a guess about the sound card but disabling the sound card drivers also didn’t help. I have an inkling of an idea that it might be Intel rapid storage technology that might be acting up but it doesn't allow me to reinstall it from failsafe mode and I haven't been able to log into normal mode for a while. I would appreciate suggestions regarding how to get into normal mode again and/or what can be the root cause.

    Read the article

  • FTP timeout but SSH is working?

    - by nmarti
    I have a problem in my server, when I try to connect via FTP to a domain, the connexion is VERY slow, and I get timeouts just listing files in a directory. When I try to connect to the domain folder using the root user account via SSH, it works fine, and I can download the files without problem. What can be wrong? I tried to reboot the server, also the office router, and nothing... It is a fedora core 7 server with proftpd. Can it be a filesystem problem? Thanks. CONNECTION LOG: Cmd: MLST about.php 250: Start of list for about.php modify=20120910092528;perm=adfrw;size=2197;type=file;UNIX.group=505;UNIX.mode=0644;UNIX.owner=10089; about.php End of list Cmd: PASV 227: Entering Passive Mode (***hidden***). Data connection timed out. Falling back to PORT instead of PASV mode. Connection falling back to port (PORT) mode. Cmd: PORT ***hidden*** 200: PORT command successful Cmd: RETR about.php Could not accept a data connection: Operation timed out.

    Read the article

  • Horrorble performance using ListViews with nested objects in WPF

    - by Christian
    Hi community, like mentioned in the title I get a horrible performance if I use ListViews with nested objects. My scenario is: Each row of a ListView presents an object of the class Transaction with following attributes: private int mTransactionID; private IBTTransactionSender mSender; private IBTTransactionReceiver mReceiver; private BTSubstrate mSubstrate; private double mAmount; private string mDeliveryNote; private string mNote; private DateTime mTransactionDate; private DateTime mCreationTimestamp; private BTEmployee mEmployee; private bool mImported; private bool mDescendedFromRecurringTransaction; Each attribute can be accessed by its corresponding property. An ObservableCollection<Transaction> is bound to the ItemsSource of a ListView. The ListView itself looks like the following: </ListView.GroupStyle> <ListView.View> <GridView> <GridViewColumn core:SortableListView.SortPropertyName="Transaction.ToSave" Width="80"> <GridViewColumnHeader Name="GVCHLoadedToSave" Style="{StaticResource ListViewHeaderStyle}">Speichern</GridViewColumnHeader> <GridViewColumn.CellTemplate> <DataTemplate> <Grid> <CheckBox Name="CBListViewItem" IsChecked="{Binding Path=Transaction.ToSave, Mode=TwoWay, UpdateSourceTrigger=PropertyChanged}"></CheckBox> </Grid> </DataTemplate> </GridViewColumn.CellTemplate> </GridViewColumn> <GridViewColumn core:SortableListView.SortPropertyName="Transaction.TransactionDate" Width="80"> <GridViewColumnHeader Name="GVCHLoadedDate" Style="{StaticResource ListViewHeaderStyle}">Datum</GridViewColumnHeader> <GridViewColumn.CellTemplate> <DataTemplate> <Grid> <TextBlock Text="{Binding ElementName=DPDate, Path=Text}" Style="{StaticResource GridBlockStyle}"/> <toolkit:DatePicker Name="DPDate" Width="{Binding ElementName=GVCHDate, Path=ActualWidth}" SelectedDateFormat="Short" Style="{StaticResource GridEditStyle}" SelectedDate="{Binding Path=Transaction.TransactionDate, Mode=TwoWay}" SelectedDateChanged="DPDate_SelectedDateChanged"/> </Grid> </DataTemplate> </GridViewColumn.CellTemplate> </GridViewColumn> <GridViewColumn core:SortableListView.SortPropertyName="Transaction.Sender.Description" Width="120"> <GridViewColumnHeader Name="GVCHLoadedSender" Style="{StaticResource ListViewHeaderStyle}">Von</GridViewColumnHeader> <GridViewColumn.CellTemplate> <DataTemplate> <Grid> <TextBlock Text="{Binding Path=Transaction.Sender.Description}" Style="{StaticResource GridBlockStyle}"/> <ComboBox Name="CBSender" Width="{Binding ElementName=GVCHSender, Path=ActualWidth}" SelectedItem="{Binding Path=Transaction.Sender}" DisplayMemberPath="Description" Text="{Binding Path=Sender.Description, Mode=OneWay}" ItemsSource="{Binding ElementName=Transaction, Path=SenderList}" Style="{StaticResource GridEditStyle}"> </ComboBox> </Grid> </DataTemplate> </GridViewColumn.CellTemplate> </GridViewColumn> <GridViewColumn core:SortableListView.SortPropertyName="Transaction.Receiver.Description" Width="120"> <GridViewColumnHeader Name="GVCHLoadedReceiver" Style="{StaticResource ListViewHeaderStyle}">Nach</GridViewColumnHeader> <GridViewColumn.CellTemplate> <DataTemplate> <Grid> <TextBlock Text="{Binding Path=Transaction.Receiver.Description}" Style="{StaticResource GridBlockStyle}"/> <ComboBox Name="CBReceiver" Width="{Binding ElementName=GVCHReceiver, Path=ActualWidth}" SelectedItem="{Binding Path=Transaction.Receiver}" DisplayMemberPath="Description" Text="{Binding Path=Receiver.Description, Mode=OneWay}" ItemsSource="{Binding ElementName=Transaction, Path=ReceiverList}" Style="{StaticResource GridEditStyle}"> </ComboBox> </Grid> </DataTemplate> </GridViewColumn.CellTemplate> </GridViewColumn> <GridViewColumn core:SortableListView.SortPropertyName="Transaction.Substrate.Description" Width="140"> <GridViewColumnHeader Name="GVCHLoadedSubstrate" Style="{StaticResource ListViewHeaderStyle}">Substrat</GridViewColumnHeader> <GridViewColumn.CellTemplate> <DataTemplate> <Grid> <TextBlock Text="{Binding Path=Transaction.Substrate.Description}" Style="{StaticResource GridBlockStyle}"/> <ComboBox Name="CBSubstrate" Width="{Binding ElementName=GVCHSubstrate, Path=ActualWidth}" SelectedItem="{Binding Path=Transaction.Substrate}" DisplayMemberPath="Description" Text="{Binding Path=Substrate.Description, Mode=OneWay}" ItemsSource="{Binding ElementName=Transaction, Path=SubstrateList}" Style="{StaticResource GridEditStyle}"> </ComboBox> </Grid> </DataTemplate> </GridViewColumn.CellTemplate> </GridViewColumn> <GridViewColumn core:SortableListView.SortPropertyName="Transaction.Amount" Width="80"> <GridViewColumnHeader Name="GVCHLoadedAmount" Style="{StaticResource ListViewHeaderStyle}">Menge [kg]</GridViewColumnHeader> <GridViewColumn.CellTemplate> <DataTemplate> <Grid> <TextBlock Text="{Binding Path=Transaction.Amount}" Style="{StaticResource GridBlockStyle}"/> <TextBox Name="TBAmount" Text="{Binding Path=Transaction.Amount, Mode=TwoWay, UpdateSourceTrigger=PropertyChanged}" Width="{Binding ElementName=GVCHAmount, Path=ActualWidth}" Style="{StaticResource GridTextBoxStyle}" /> </Grid> </DataTemplate> </GridViewColumn.CellTemplate> </GridViewColumn> <GridViewColumn core:SortableListView.SortPropertyName="Transaction.DeliveryNote" Width="100"> <GridViewColumnHeader Name="GVCHLoadedDeliveryNote" Style="{StaticResource ListViewHeaderStyle}">Lieferschein Nr.</GridViewColumnHeader> <GridViewColumn.CellTemplate> <DataTemplate> <Grid> <TextBlock Text="{Binding Path=Transaction.DeliveryNote}" Style="{StaticResource GridBlockStyle}"/> <TextBox Name="TBDeliveryNote" Text="{Binding Path=Transaction.DeliveryNote, Mode=TwoWay, UpdateSourceTrigger=PropertyChanged}" Width="{Binding ElementName=GVCHDeliveryNote, Path=ActualWidth}" Style="{StaticResource GridEditStyle}" /> </Grid> </DataTemplate> </GridViewColumn.CellTemplate> </GridViewColumn> <GridViewColumn core:SortableListView.SortPropertyName="Transaction.Note" Width="190"> <GridViewColumnHeader Name="GVCHLoadedNote" Style="{StaticResource ListViewHeaderStyle}">Bemerkung</GridViewColumnHeader> <GridViewColumn.CellTemplate> <DataTemplate> <Grid> <TextBlock Text="{Binding Path=Transaction.Note}" Style="{StaticResource GridBlockStyle}"/> <TextBox Name="TBNote" Text="{Binding Path=Transaction.Note, Mode=TwoWay, UpdateSourceTrigger=PropertyChanged}" Width="{Binding ElementName=GVCHNote, Path=ActualWidth}" Style="{StaticResource GridEditStyle}" /> </Grid> </DataTemplate> </GridViewColumn.CellTemplate> </GridViewColumn> <GridViewColumn core:SortableListView.SortPropertyName="Transaction.Employee.LastName" Width="100"> <GridViewColumnHeader Name="GVCHLoadedEmployee" Style="{StaticResource ListViewHeaderStyle}">Mitarbeiter</GridViewColumnHeader> <GridViewColumn.CellTemplate> <DataTemplate> <Grid> <TextBlock Text="{Binding Path=Transaction.Employee.LastName}" Style="{StaticResource GridBlockStyle}"/> <ComboBox Name="CBEmployee" Width="{Binding ElementName=GVCHEmployee, Path=ActualWidth}" SelectedItem="{Binding Path=Transaction.Employee}" DisplayMemberPath="LastName" Text="{Binding Path=Employee.LastName, Mode=OneWay}" ItemsSource="{Binding ElementName=Transaction, Path=EmployeeList}" Style="{StaticResource GridEditStyle}"> </ComboBox> </Grid> </DataTemplate> </GridViewColumn.CellTemplate> </GridViewColumn> </GridView> </ListView.View> </ListView> As you can see in the screenshot the user got the possibility to change the values of the transaction attributes with comboboxes. Ok now to my problem. If I click on the "Laden" button the application will load about 150 entries in the ObservableCollection<Transaction>. Before I fill the collection I set the ItemsSource of the ListView to null and after filling I bind the collection to the ItemsSource once again. The loading itself takes a few milliseconds, but the rendering of the filled collection takes a long time (150 entries = about 20 sec). I tested to delete all Comboboxes out of the xaml and i got a better performance, because I don't have to fill the ComboBoxes for each row. But I need to have these comboboxes for modifing the attributes of the Transaction. Does anybody know how to improve the performance? THX

    Read the article

  • Website displays in chrome perfectly, but not in mozilla or IE

    - by Atharul Khan
    here are the code snippets for the html and css. It works finds in Google chrome, but when I try to display it in mozilla or IE, it shows something completely different. I cannot attach images as I do not have the required reputation. I really appreciate the help. Thank you! HTML <!DOCTYPE html> <html> <head> <meta charset="utf-8" /> <meta http-equiv="Content-type" content="text/html; charset=utf-8" /> <meta name="viewport" content="width=device-width, initial-scale=1" /> <link rel="stylesheet" type="text/css" href="style.css"> <link rel="shortcut icon" href="ak.png"> <title>Home</title> </head> <body> <div class="Nav"> <nav> <ul class="navigation fade-in2"> <li><a href="#home">Home</a></li> <li><a href="#about">About</a></li> <li><a href="#portfolio">Portfolio</a></li> <li><a href="#shop">Shop</a></li> <li><a href="#blog">Blog</a></li> <li><a href="#contact">Contact</a></li> </ul> </nav> </div> <div class="logo"><a href="#home"><img class="ak fade-in2" src="ak.png"></a></div> <div class="background"><img class="beauty" src="beauty.jpg"></div> <div class="header"> <h1 class="headerName fade-in">DESIGN | DEVELOP | BRAND</h1> <h4 class="service fade-in3"><a href="#portfolio">VIEW PORTFOLIO</a></h4> <h4 class="service fade-in3"><a href="#services">VIEW SERVICES</a></h4> </div> <!--<div class="mainbody"><p>safsdaf</p></div>--> </body> </html> CSS @-webkit-keyframes fadeIn { from { opacity:0; } to { opacity:1; } } @-moz-keyframes fadeIn { from { opacity:0; } to { opacity:1; } } @keyframes fadeIn { from { opacity:0; } to { opacity:1; } } * { padding: 0; margin: 0; } li { display: inline; font-size: 15px; font-family: verdana; } nav { width: 100%; text-align: right; background-color: #222222; padding: 0; margin: 0px; line-height: 47px; position: fixed; z-index: 100; } .ak{ width: 90px; height: 55px; z-index: 101; position: fixed; background: transparent; color: transparent; background-color: transparent; } .Nav a{ text-decoration: none; padding: 15px; } .Nav a:link{ color: #A7A7A7; } .Nav a:visited{ color: #A7A7A7; } .Nav a:hover{ color: #DBDBDB; transition: all 0.3s ease-out 0s; transition-property: all; transition-duration: 0.3s; transition-timing-function: ease-out; transition-delay: 0s; } .header { background-color: rgba(0,0,0, 0.25); width: 100%; height: 626px; text-align: center; position: fixed; z-index: 10; } .background { position: fixed; z-index: 8; } .beauty { width: 100%; height: 626px; } .headerName { font-size: 2.5em; text-align: center; color: #D3D3D3; padding: 180px; padding-bottom: 50px; margin: 0px; letter-spacing: 4px; font-weight: 100; font-family: 'Lato', sans-serif; } .fade-in { opacity:0; /* make things invisible upon start */ -webkit-animation:fadeIn ease-in 1; /* call our keyframe named fadeIn, use animation ease-in and repeat it only 1 time */ -moz-animation:fadeIn ease-in 1; animation:fadeIn ease-in 1; -webkit-animation-fill-mode:forwards; /* this makes sure that after animation is done we remain at the last keyframe value (opacity: 1)*/ -moz-animation-fill-mode:forwards; animation-fill-mode:forwards; -webkit-animation-duration:1s; -moz-animation-duration:1s; animation-duration:1s; -webkit-animation-delay: 0.3s; -moz-animation-delay:0.3s; animation-delay: 0.3s; } .fade-in2 { opacity:0; /* make things invisible upon start */ -webkit-animation:fadeIn ease-in 1; /* call our keyframe named fadeIn, use animation ease-in and repeat it only 1 time */ -moz-animation:fadeIn ease-in 1; animation:fadeIn ease-in 1; -webkit-animation-fill-mode:forwards; /* this makes sure that after animation is done we remain at the last keyframe value (opacity: 1)*/ -moz-animation-fill-mode:forwards; animation-fill-mode:forwards; -webkit-animation-duration:1s; -moz-animation-duration:1s; animation-duration:1s; -webkit-animation-delay: 0.6s; -moz-animation-delay:0.6s; animation-delay: 0.6s; } .fade-in3 { opacity:0; /* make things invisible upon start */ -webkit-animation:fadeIn ease-in 1; /* call our keyframe named fadeIn, use animation ease-in and repeat it only 1 time */ -moz-animation:fadeIn ease-in 1; animation:fadeIn ease-in 1; -webkit-animation-fill-mode:forwards; /* this makes sure that after animation is done we remain at the last keyframe value (opacity: 1)*/ -moz-animation-fill-mode:forwards; animation-fill-mode:forwards; -webkit-animation-duration:1s; -moz-animation-duration:1s; animation-duration:1s; -webkit-animation-delay: 0.9s; -moz-animation-delay:0.9s; animation-delay: 0.9s; } .service{ font-size: 14px; width: 190px; text-align: center; font-family: 'Lato', sans-serif; color: #D3D3D3; border: 2px #A7A7A7 solid; border-color: rgba(255, 255, 255, 0.5); display: inline-block; border-radius: 5px; background-color: transparent; letter-spacing: 2px; } .service a{ text-decoration: none; display: block; padding: 15px 20px; } .service a:link{ color: #D3D3D3; } .service a:visited{ color: #D3D3D3; } .service a:hover{ background-color: rgba(255, 255, 255, 0.15); transition: background-color .15s ease-in; -webkit-transition: background-color .15s ease-in; -moz-transition: background-color .15s ease-in; -o-transition: background-color .15s ease-in; } UPDATE 1: I updated both browsers and it seems the css3 animations work perfectly fine on both browsers. What seems to be the problem is the positioning of the pages UPDATE 2: Here are the links to the different browser screen shots Chrome: https://www.dropbox.com/s/jlpa4vu51kdnews/Chrome.JPG InternetExplorer: https://www.dropbox.com/s/zbchs3su9ahxr0n/IE.JPG Mozilla Firefox: dropbox(.)com/s/fyalnhsha9ktadz/Mozilla.JPG (I can't post the third link because I don't have enough reputation)

    Read the article

  • SQL SERVER – PAGEIOLATCH_DT, PAGEIOLATCH_EX, PAGEIOLATCH_KP, PAGEIOLATCH_SH, PAGEIOLATCH_UP – Wait Type – Day 9 of 28

    - by pinaldave
    It is very easy to say that you replace your hardware as that is not up to the mark. In reality, it is very difficult to implement. It is really hard to convince an infrastructure team to change any hardware because they are not performing at their best. I had a nightmare related to this issue in a deal with an infrastructure team as I suggested that they replace their faulty hardware. This is because they were initially not accepting the fact that it is the fault of their hardware. But it is really easy to say “Trust me, I am correct”, while it is equally important that you put some logical reasoning along with this statement. PAGEIOLATCH_XX is such a kind of those wait stats that we would directly like to blame on the underlying subsystem. Of course, most of the time, it is correct – the underlying subsystem is usually the problem. From Book On-Line: PAGEIOLATCH_DT Occurs when a task is waiting on a latch for a buffer that is in an I/O request. The latch request is in Destroy mode. Long waits may indicate problems with the disk subsystem. PAGEIOLATCH_EX Occurs when a task is waiting on a latch for a buffer that is in an I/O request. The latch request is in Exclusive mode. Long waits may indicate problems with the disk subsystem. PAGEIOLATCH_KP Occurs when a task is waiting on a latch for a buffer that is in an I/O request. The latch request is in Keep mode. Long waits may indicate problems with the disk subsystem. PAGEIOLATCH_SH Occurs when a task is waiting on a latch for a buffer that is in an I/O request. The latch request is in Shared mode. Long waits may indicate problems with the disk subsystem. PAGEIOLATCH_UP Occurs when a task is waiting on a latch for a buffer that is in an I/O request. The latch request is in Update mode. Long waits may indicate problems with the disk subsystem. PAGEIOLATCH_XX Explanation: Simply put, this particular wait type occurs when any of the tasks is waiting for data from the disk to move to the buffer cache. ReducingPAGEIOLATCH_XX wait: Just like any other wait type, this is again a very challenging and interesting subject to resolve. Here are a few things you can experiment on: Improve your IO subsystem speed (read the first paragraph of this article, if you have not read it, I repeat that it is easy to say a step like this than to actually implement or do it). This type of wait stats can also happen due to memory pressure or any other memory issues. Putting aside the issue of a faulty IO subsystem, this wait type warrants proper analysis of the memory counters. If due to any reasons, the memory is not optimal and unable to receive the IO data. This situation can create this kind of wait type. Proper placing of files is very important. We should check file system for the proper placement of files – LDF and MDF on separate drive, TempDB on separate drive, hot spot tables on separate filegroup (and on separate disk), etc. Check the File Statistics and see if there is higher IO Read and IO Write Stall SQL SERVER – Get File Statistics Using fn_virtualfilestats. It is very possible that there are no proper indexes on the system and there are lots of table scans and heap scans. Creating proper index can reduce the IO bandwidth considerably. If SQL Server can use appropriate cover index instead of clustered index, it can significantly reduce lots of CPU, Memory and IO (considering cover index has much lesser columns than cluster table and all other it depends conditions). You can refer to the two articles’ links below previously written by me that talk about how to optimize indexes. Create Missing Indexes Drop Unused Indexes Updating statistics can help the Query Optimizer to render optimal plan, which can only be either directly or indirectly. I have seen that updating statistics with full scan (again, if your database is huge and you cannot do this – never mind!) can provide optimal information to SQL Server optimizer leading to efficient plan. Checking Memory Related Perfmon Counters SQLServer: Memory Manager\Memory Grants Pending (Consistent higher value than 0-2) SQLServer: Memory Manager\Memory Grants Outstanding (Consistent higher value, Benchmark) SQLServer: Buffer Manager\Buffer Hit Cache Ratio (Higher is better, greater than 90% for usually smooth running system) SQLServer: Buffer Manager\Page Life Expectancy (Consistent lower value than 300 seconds) Memory: Available Mbytes (Information only) Memory: Page Faults/sec (Benchmark only) Memory: Pages/sec (Benchmark only) Checking Disk Related Perfmon Counters Average Disk sec/Read (Consistent higher value than 4-8 millisecond is not good) Average Disk sec/Write (Consistent higher value than 4-8 millisecond is not good) Average Disk Read/Write Queue Length (Consistent higher value than benchmark is not good) Note: The information presented here is from my experience and there is no way that I claim it to be accurate. I suggest reading Book OnLine for further clarification. All of the discussions of Wait Stats in this blog is generic and varies from system to system. It is recommended that you test this on a development server before implementing it to a production server. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Pinal Dave, PostADay, SQL, SQL Authority, SQL Query, SQL Scripts, SQL Server, SQL Tips and Tricks, SQL Wait Stats, SQL Wait Types, T SQL, Technology

    Read the article

  • SQL SERVER – PAGELATCH_DT, PAGELATCH_EX, PAGELATCH_KP, PAGELATCH_SH, PAGELATCH_UP – Wait Type – Day 12 of 28

    - by pinaldave
    This is another common wait type. However, I still frequently see people getting confused with PAGEIOLATCH_X and PAGELATCH_X wait types. Actually, there is a big difference between the two. PAGEIOLATCH is related to IO issues, while PAGELATCH is not related to IO issues but is oftentimes linked to a buffer issue. Before we delve deeper in this interesting topic, first let us understand what Latch is. Latches are internal SQL Server locks which can be described as very lightweight and short-term synchronization objects. Latches are not primarily to protect pages being read from disk into memory. It’s a synchronization object for any in-memory access to any portion of a log or data file.[Updated based on comment of Paul Randal] The difference between locks and latches is that locks seal all the involved resources throughout the duration of the transactions (and other processes will have no access to the object), whereas latches locks the resources during the time when the data is changed. This way, a latch is able to maintain the integrity of the data between storage engine and data cache. A latch is a short-living lock that is put on resources on buffer cache and in the physical disk when data is moved in either directions. As soon as the data is moved, the latch is released. Now, let us understand the wait stat type  related to latches. From Book On-Line: PAGELATCH_DT Occurs when a task is waiting on a latch for a buffer that is not in an I/O request. The latch request is in Destroy mode. PAGELATCH_EX Occurs when a task is waiting on a latch for a buffer that is not in an I/O request. The latch request is in Exclusive mode. PAGELATCH_KP Occurs when a task is waiting on a latch for a buffer that is not in an I/O request. The latch request is in Keep mode. PAGELATCH_SH Occurs when a task is waiting on a latch for a buffer that is not in an I/O request. The latch request is in Shared mode. PAGELATCH_UP Occurs when a task is waiting on a latch for a buffer that is not in an I/O request. The latch request is in Update mode. PAGELATCH_X Explanation: When there is a contention of access of the in-memory pages, this wait type shows up. It is quite possible that some of the pages in the memory are of very high demand. For the SQL Server to access them and put a latch on the pages, it will have to wait. This wait type is usually created at the same time. Additionally, it is commonly visible when the TempDB has higher contention as well. If there are indexes that are heavily used, contention can be created as well, leading to this wait type. Reducing PAGELATCH_X wait: The following counters are useful to understand the status of the PAGELATCH: Average Latch Wait Time (ms): The wait time for latch requests that have to wait. Latch Waits/sec: This is the number of latch requests that could not be granted immediately. Total Latch Wait Time (ms): This is the total latch wait time for latch requests in the last second. If there is TempDB contention, I suggest that you read the blog post of Robert Davis right away. He has written an excellent blog post regarding how to find out TempDB contention. The same blog post explains the terms in the allocation of GAM, SGAM and PFS. If there was a TempDB contention, Paul Randal explains the optimal settings for the TempDB in his misconceptions series. Trace Flag 1118 can be useful but use it very carefully. I totally understand that this blog post is not as clear as my other blog posts. I suggest if this wait stats is on one of your higher wait type. Do leave a comment or send me an email and I will get back to you with my solution for your situation. May the looking at all other wait stats and types together become effective as this wait type can help suggest proper bottleneck in your system. Read all the post in the Wait Types and Queue series. Note: The information presented here is from my experience and there is no way that I claim it to be accurate. I suggest reading Book OnLine for further clarification. All the discussions of Wait Stats in this blog are generic and vary from system to system. It is recommended that you test this on a development server before implementing it to a production server. Reference: Pinal Dave (http://blog.SQLAuthority.com)   Filed under: Pinal Dave, PostADay, SQL, SQL Authority, SQL Query, SQL Scripts, SQL Server, SQL Tips and Tricks, SQL Wait Stats, SQL Wait Types, T SQL, Technology

    Read the article

  • How to UEFI install Ubuntu 12.10?

    - by Geezanansa
    Running a newer FM1 motherboard which is using an AMD 3870k APU with a new 1TB HDD. Following the advice in the motherboard manual and https://help.ubuntu.com/community/UEFI have now got to grub option screen for UEFI install. see http://imgur.com/VW5vz The dvd.iso being used is Ubuntu 12.10 desktop amd64 from ubuntu .com. The hdd has had a gpt partition table made for, by using gparted when in a live desktop session when booted in bios mode. (*edit/update: Although the old cd updates on running it is an old kernel and it did make a gpt but that version of gparted uses fdisk whereas gdisk is required to make gpt. Think am going to have to spend more time here http://www.dedoimedo.com/computers/gparted.html lol Using the gparted from 12.10 live session to make partitions; following the guidance regarding this at https://help.ubuntu.com/community/UEFI#Creating_an_EFI_partition, but can only boot to grub option screen http://imgur.com/VW5vz when 12.10 options to "try ubuntu" or "install ubuntu" are selected they give errors as described below*) but after making the gpt decided to leave it unformatted/unallocated space with the intention of using installer to set up partitions. update-originally but gparted now sees hdd as http://imgur.com/hFIvm as described above. *Booting live dvd in EFI mode gives "Secure Boot not installed" just before grub kernel option list with the option to "install ubuntu" but get "can not read cd/0" and "the kernel must be loaded first" errors; when that option is selected. Any pointers on how to get installer going for UEFI install would be good. Thanks in advance. update: Hopefully these screenshots can help better highlight where i am going wrong or if there is something else going on http://imgur.com/g30RB, http://imgur.com/VW5vz, http://imgur.com/31E0q, http://imgur.com/bnuaG, http://imgur.com/y4KGu, http://imgur.com/3u2QE, http://imgur.com/n9lN3, http://imgur.com/FEKvz, http://imgur.com/hFIvm, update: Thank you fernando garcia for pointing me in the right direction to start the process of elimantion. What i have done since asking question is a little home work starting here http://askubuntu.com/faq#bounty and here http://askubuntu.com/questions/how-to-ask. Looking at other similar questions was good fun and found this 12.10 UEFI Secure Boot install the most relative in helping getting ubuntu to uefi install on my system. In response to wolverine's question this article was referred to http://web.dodds.net/~vorlon/wiki/blog/SecureBoot_in_Ubuntu_12.10/ This article in the first sentence gives a link to http://www.ubuntu.com/download which is where i downloaded the 12.10 desktop amd64 .iso(and others) but have been unable to do a efi install of ubuntu on this system and as this is a new system have ended up just going with bios installer running which at least puts my mind at ease that i have not bricked my new mobo.(had to do a clrcmos and flash to latest bios version) So it possibly could be the bios settings or the bios version being used that is problem. To try and eliminate bios version i can not get to post screen in order to id bios version being used. Pressing tab to show post instead of logo and trying to pausebreak to catch post is proving difficult. If logo screen in bios is disabled just get black screen no post shown and pressing tab does not show post. Appreciate using appropriate bios settings and latest 12.10 release should simply get uefi installer running when selected from the grub list (nice graphic details in Identifying if computer boots the cd in efi mode section at https://help.ubuntu.com/community/UEFI#Identifying_if_the_computer_boots_the_CD_in_EFI_mode) And to confirm the hdd is booting in efi mode https://help.ubuntu.com/community/UEFI#Identifying_if_the_computer_boots_the_HDD_in_EFI_mode running the command [ -d /sys/firmware/efi ] && echo "EFI boot on HDD" || echo "Legacy boot on HDD" gave Legacy boot on HDD This is as expected because i allowed the bios installer (which was 12.04 desktop amd64 after trying 12.10 desktop amd64 in efi mode) to run to get a working installation. Which is not what was intended or wished for but wanted to get a working os to bench test new mobo i.e. prove it is working. There are other options as in installing other bootmanagers/loaders but do not wish to do so as shim should get grub2 going that is after secure boot has been signed.(Now got rough idea what should happen just it aint happening. Is it possible ahci drivers are required?) Will post boot info script url of the updated config/setup. The original question asked seems irrelevant to what is being said in this update but as the problem is not resolved will keep on trying efi installing! i.e the problem is same as when question asked just trying to update. Have tried to edit and update the best i can!

    Read the article

  • Can not print after upgrading from 12.x to 14.04

    - by user318889
    After upgrading from V12.04 to V14.04 I am not able to print. I am using an HP LaserJet 400 M451dn. The printer troubleshooter told me that there is no solution to the problem. This is the output of the advanced diagnositc output. (Due to limited space I cut the output!) Can anybody tell me what is going wrong. I am using the printer via USB ? Page 1 (Scheduler not running?): {'cups_connection_failure': False} Page 2 (Is local server publishing?): {'local_server_exporting_printers': False} Page 3 (Choose printer): {'cups_dest': , 'cups_instance': None, 'cups_queue': u'HP-LaserJet-400-color-M451dn', 'cups_queue_listed': True} Page 4 (Check printer sanity): {'cups_device_uri_scheme': u'hp', 'cups_printer_dict': {'device-uri': u'hp:/usb/HP_LaserJet_400_color_M451dn?serial=CNFF308670', 'printer-info': u'Hewlett-Packard HP LaserJet 400 color M451dn', 'printer-is-shared': True, 'printer-location': u'Pinatubo', 'printer-make-and-model': u'HP LJ 300-400 color M351-M451 Postscript (recommended)', 'printer-state': 4, 'printer-state-message': u'', 'printer-state-reasons': [u'none'], 'printer-type': 8556636, 'printer-uri-supported': u'ipp://localhost:631/printers/HP-LaserJet-400-color-M451dn'}, 'cups_printer_remote': False, 'hplip_output': (['', '\x1b[01mHP Linux Imaging and Printing System (ver. 3.14.6)\x1b[0m', '\x1b[01mDevice Information Utility ver. 5.2\x1b[0m', '', 'Copyright (c) 2001-13 Hewlett-Packard Development Company, LP', 'This software comes with ABSOLUTELY NO WARRANTY.', 'This is free software, and you are welcome to distribute it', 'under certain conditions. See COPYING file for more details.', '', '', '\x1b[01mhp:/usb/HP_LaserJet_400_color_M451dn?serial=CNFF308670\x1b[0m', '', '\x1b[01mDevice Parameters (dynamic data):\x1b[0m', '\x1b[01m Parameter Value(s) \x1b[0m', ' ---------------------------- ----------------------------------------------------------', ' back-end hp ', " cups-printers ['HP-LaserJet-400-color-M451dn'] ", ' cups-uri hp:/usb/HP_LaserJet_400_color_M451dn?serial=CNFF308670 ', ' dev-file ', ' device-state -1 ', ' device-uri hp:/usb/HP_LaserJet_400_color_M451dn?serial=CNFF308670 ', ' deviceid ', ' error-state 101 ', ' host ', ' is-hp True ', ' panel 0 ', ' panel-line1 ', ' panel-line2 ', ' port 1 ', ' serial CNFF308670 ', ' status-code 5002 ', ' status-desc ', '\x1b[01m', 'Model Parameters (static data):\x1b[0m', '\x1b[01m Parameter Value(s) \x1b[0m', ' ---------------------------- ----------------------------------------------------------', ' align-type 0 ', ' clean-type 0 ', ' color-cal-type 0 ', ' copy-type 0 ', ' embedded-server-type 0 ', ' fax-type 0 ', ' fw-download False ', ' icon hp_color_laserjet_cp2025.png ', ' io-mfp-mode 1 ', ' io-mode 1 ', ' io-support 6 ', ' job-storage 0 ', ' linefeed-cal-type 0 ', ' model HP_LaserJet_400_color_M451dn ', ' model-ui HP LaserJet 400 Color m451dn ', ' model1 HP LaserJet 400 Color M451dn ', ' monitor-type 0 ', ' panel-check-type 0 ', ' pcard-type 0 ', ' plugin 0 ', ' plugin-reason 0 ', ' power-settings 0 ', ' ppd-name lj_300_400_color_m351_m451 ', ' pq-diag-type 0 ', ' r-type 0 ', ' r0-agent1-kind 4 ', ' r0-agent1-sku CE410A/CE410X ', ' r0-agent1-type 1 ', ' r0-agent2-kind 4 ', ' r0-agent2-sku CE411A ', ' r0-agent2-type 4 ', ' r0-agent3-kind 4 ', ' r0-agent3-sku CE413A ', ' r0-agent3-type 5 ', ' r0-agent4-kind 4 ', ' r0-agent4-sku CE412A ', ' r0-agent4-type 6 ', ' scan-src 0 ', ' scan-type 0 ', ' status-battery-check 0 ', ' status-dynamic-counters 0 ', ' status-type 3 ', ' support-released True ', ' support-subtype 2202411 ', ' support-type 2 ', ' support-ver 3.12.2 ', " tech-class ['Postscript'] ", " tech-subclass ['Normal'] ", ' tech-type 4 ', ' usb-pid 3882 ', ' usb-vid 1008 ', ' wifi-config 0 ', '\x1b[01m', 'Status History (most recent first):\x1b[0m', '\x1b[01m Date/Time Code Status Description User Job ID \x1b[0m', ' -------------------- ----- ---------------------------------------- -------- --------', ' 08/21/14 00:07:25 5012 Device communication error richard 0 ', ' 08/20/14 13:42:44 500 Started a print job richard 4214 ', '', '', 'Done.', ''], ['\x1b[35;01mwarning: No display found.\x1b[0m', '\x1b[31;01merror: hp-info -u/--gui requires Qt4 GUI support. Entering interactive mode.\x1b[0m', '\x1b[31;01merror: Unable to communicate with device (code=12): hp:/usb/HP_LaserJet_400_color_M451dn?serial=CNFF308670\x1b[0m', '\x1b[31;01merror: Error opening device (Device not found).\x1b[0m', ''], 0), 'is_cups_class': False, 'local_cups_queue_attributes': {'charset-configured': u'utf-8', 'charset-supported': [u'us-ascii', u'utf-8'], 'color-supported': True, 'compression-supported': [u'none', u'gzip'], 'copies-default': 1, 'copies-supported': (1, 9999), 'cups-version': u'1.7.2', 'device-uri': u'hp:/usb/HP_LaserJet_400_color_M451dn?serial=CNFF308670', 'document-format-default': u'application/octet-stream', 'document-format-supported': [u'application/octet-stream', u'application/pdf', u'application/postscript', u'application/vnd.adobe-reader-postscript', u'application/vnd.cups-command', u'application/vnd.cups-pdf', u'application/vnd.cups-pdf-banner', u'application/vnd.cups-postscript', u'application/vnd.cups-raw', u'application/vnd.samsung-ps', u'application/x-cshell', u'application/x-csource', u'application/x-perl', u'application/x-shell', u'image/gif', u'image/jpeg', u'image/png', u'image/tiff', u'image/urf', u'image/x-bitmap', u'image/x-photocd', u'image/x-portable-anymap', u'image/x-portable-bitmap', u'image/x-portable-graymap', u'image/x-portable-pixmap', u'image/x-sgi-rgb', u'image/x-sun-raster', u'image/x-xbitmap', u'image/x-xpixmap', u'image/x-xwindowdump', u'text/css', u'text/html', u'text/plain'], 'finishings-default': 3, 'finishings-supported': [3], 'generated-natural-language-supported': [u'en-us'], 'ipp-versions-supported': [u'1.0', u'1.1', u'2.0', u'2.1'], 'ippget-event-life': 15, 'job-creation-attributes-supported': [u'copies', u'finishings', u'ipp-attribute-fidelity', u'job-hold-until', u'job-name', u'job-priority', u'job-sheets', u'media', u'media-col', u'multiple-document-handling', u'number-up', u'output-bin', u'orientation-requested', u'page-ranges', u'print-color-mode', u'print-quality', u'printer-resolution', u'sides'], 'job-hold-until-default': u'no-hold', 'job-hold-until-supported': [u'no-hold', u'indefinite', u'day-time', u'evening', u'night', u'second-shift', u'third-shift', u'weekend'], 'job-ids-supported': True, 'job-k-limit': 0, 'job-k-octets-supported': (0, 470914416), 'job-page-limit': 0, 'job-priority-default': 50, 'job-priority-supported': [100], 'job-quota-period': 0, 'job-settable-attributes-supported': [u'copies', u'finishings', u'job-hold-until', u'job-name', u'job-priority', u'media', u'media-col', u'multiple-document-handling', u'number-up', u'output-bin', u'orientation-requested', u'page-ranges', u'print-color-mode', u'print-quality', u'printer-resolution', u'sides'], 'job-sheets-default': (u'none', u'none'), 'job-sheets-supported': [u'none', u'classified', u'confidential', u'form', u'secret', u'standard', u'topsecret', u'unclassified'], 'jpeg-k-octets-supported': (0, 470914416), 'jpeg-x-dimension-supported': (0, 65535), 'jpeg-y-dimension-supported': (1, 65535), 'marker-change-time': 0, 'media-bottom-margin-supported': [423], 'media-col-default': u'(unknown IPP value tag 0x34)', 'media-col-supported': [u'media-bottom-margin', u'media-left-margin', u'media-right-margin', u'media-size', u'media-source', u'media-top-margin', u'media-type'], 'media-default': u'iso_a4_210x297mm', 'media-left-margin-supported': [423], 'media-right-margin-supported': [423],

    Read the article

  • Steganography : Encoded audio and video file not being played, getting corrupted. What is the issue

    - by Shantanu Gupta
    I have made a steganography program to encrypt/Decrypt some text under image audio and video. I used image as bmp(54 byte header) file, audio as wav(44 byte header) file and video as avi(56 byte header) file formats. When I tries to encrypt text under all these file then it gets encrypted successfully and are also getting decrypted correctly. But it is creating a problem with audio and video i.e these files are not being played after encrypted result. What can be the problem. I am working on Turbo C++ compiler. I know it is super outdated compiler but I have to do it in this only. Here is my code to encrypt. int Binary_encode(char *txtSourceFileName, char *binarySourceFileName, char *binaryTargetFileName,const short headerSize) { long BinarySourceSize=0,TextSourceSize=0; char *Buffer; long BlockSize=10240, i=0; ifstream ReadTxt, ReadBinary; //reads ReadTxt.open(txtSourceFileName,ios::binary|ios::in);//file name, mode of open, here input mode i.e. read only if(!ReadTxt) { cprintf("\nFile can not be opened."); return 0; } ReadBinary.open(binarySourceFileName,ios::binary|ios::in);//file name, mode of open, here input mode i.e. read only if(!ReadBinary) { ReadTxt.close();//closing opened file cprintf("\nFile can not be opened."); return 0; } ReadBinary.seekg(0,ios::end);//setting pointer to a file at the end of file. ReadTxt.seekg(0,ios::end); BinarySourceSize=(long )ReadBinary.tellg(); //returns the position of pointer TextSourceSize=(long )ReadTxt.tellg(); //returns the position of pointer ReadBinary.seekg(0,ios::beg); //sets the pointer to the begining of file ReadTxt.seekg(0,ios::beg); //sets the pointer to the begining of file if(BinarySourceSize<TextSourceSize*50) //Minimum size of an image should be 50 times the size of file to be encrypted { cout<<"\n\n"; cprintf("Binary File size should be bigger than text file size."); ReadBinary.close(); ReadTxt.close(); return 0; } cout<<"\n"; cprintf("\n\nSize of Source Image/Audio File is : "); cout<<(float)BinarySourceSize/1024; cprintf("KB"); cout<<"\n"; cprintf("Size of Text File is "); cout<<TextSourceSize; cprintf(" Bytes"); cout<<"\n"; getch(); //write header to file without changing else file will not open //bmp image's header size is 53 bytes Buffer=new char[headerSize]; ofstream WriteBinary; // writes to file WriteBinary.open(binaryTargetFileName,ios::binary|ios::out|ios::trunc);//file will be created or truncated if already exists ReadBinary.read(Buffer,headerSize);//reads no of bytes and stores them into mem, size contains no of bytes in a file WriteBinary.write(Buffer,headerSize);//writes header to 2nd image delete[] Buffer;//deallocate memory /* Buffer = new char[sizeof(long)]; Buffer = (char *)(&TextSourceSize); cout<<Buffer; */ WriteBinary.write((char *)(&TextSourceSize),sizeof(long)); //writes no of byte to be written in image immediate after header ends //to decrypt file if(!(Buffer=new char[TextSourceSize])) { cprintf("Enough Memory could not be assigned."); return 0; } ReadTxt.read(Buffer,TextSourceSize);//read all data from text file ReadTxt.close();//file no more needed WriteBinary.write(Buffer,TextSourceSize);//writes all text file data into image delete[] Buffer;//deallocate memory //replace Tsize+1 below with Tsize and run the program to see the change //this is due to the reason that 50-54 byte no are of colors which we will be changing ReadBinary.seekg(TextSourceSize+1,ios::cur);//move pointer to the location-current loc i.e. 53+content of text file //write remaining image content to image file while(i<BinarySourceSize-headerSize-TextSourceSize+1) { i=i+BlockSize; Buffer=new char[BlockSize]; ReadBinary.read(Buffer,BlockSize);//reads no of bytes and stores them into mem, size contains no of bytes in a file WriteBinary.write(Buffer,BlockSize); delete[] Buffer; //clear memory, else program can fail giving correct output } ReadBinary.close(); WriteBinary.close(); //Encoding Completed return 0; } Code to decrypt int Binary_decode(char *binarySourceFileName, char *txtTargetFileName, const short headerSize) { long TextDestinationSize=0; char *Buffer; long BlockSize=10240; ifstream ReadBinary; ofstream WriteText; ReadBinary.open(binarySourceFileName,ios::binary|ios::in);//file will be appended if(!ReadBinary) { cprintf("File can not be opened"); return 0; } ReadBinary.seekg(headerSize,ios::beg); Buffer=new char[4]; ReadBinary.read(Buffer,4); TextDestinationSize=*((long *)Buffer); delete[] Buffer; cout<<"\n\n"; cprintf("Size of the File that will be created is : "); cout<<TextDestinationSize; cprintf(" Bytes"); cout<<"\n\n"; sleep(1); WriteText.open(txtTargetFileName,ios::binary|ios::out|ios::trunc);//file will be created if not exists else truncate its data while(TextDestinationSize>0) { if(TextDestinationSize<BlockSize) BlockSize=TextDestinationSize; Buffer= new char[BlockSize]; ReadBinary.read(Buffer,BlockSize); WriteText.write(Buffer,BlockSize); delete[] Buffer; TextDestinationSize=TextDestinationSize-BlockSize; } ReadBinary.close(); WriteText.close(); return 0; } int text_encode(char *SourcefileName, char *DestinationfileName) { ifstream fr; //reads ofstream fw; // writes to file char c; int random; clrscr(); fr.open(SourcefileName,ios::binary);//file name, mode of open, here input mode i.e. read only if(!fr) { cprintf("File can not be opened."); getch(); return 0; } fw.open(DestinationfileName,ios::binary|ios::out|ios::trunc);//file will be created or truncated if already exists while(fr) { int i; while(fr!=0) { fr.get(c); //reads a character from file and increments its pointer char ch; ch=c; ch=ch+1; fw<<ch; //appends character in c to a file } } fr.close(); fw.close(); return 0; } int text_decode(char *SourcefileName, char *DestinationName) { ifstream fr; //reads ofstream fw; // wrrites to file char c; int random; clrscr(); fr.open(SourcefileName,ios::binary);//file name, mode of open, here input mode i.e. read only if(!fr) { cprintf("File can not be opened."); return 0; } fw.open(DestinationName,ios::binary|ios::out|ios::trunc);//file will be created or truncated if already exists while(fr) { int i; while(fr!=0) { fr.get(c); //reads a character from file and increments its pointer char ch; ch=c; ch=ch-1; fw<<ch; //appends character in c to a file } } fr.close(); fw.close(); return 0; }

    Read the article

  • SBS domain name choice

    - by sandymac
    We are about to set up SBS 2011 at my small company < 10 users. My collaborator wants to name the SBS domain "example.local" . I'm of the opinion we should name the SBS domain "corp.example.com" and setup DNS so the "corp" record is a NS record to the SBS server's private IP. FYI: "Example.com" isn't the real domain name and while the website is hosted outside our office, email will be stored on the SBS server in our office after passing though a spam filtering smart host hosted elsewhere too.

    Read the article

  • Distinction between an extranet and a DMZ

    - by Markus Yrjölä
    I've been reading about intranets, extranets, DMZs and VPNs now, and I'd need some clarifications related to extranets and DMZs. I understand that they are different types of concepts - extranet allows limited access to some intranet resources, while DMZ is a subnet that sits between the internet and intranet and hosts the external-faced services. However, I'd like to know what is their distinction in practice in a usual setup? The Wikipedia article on extranets says that extranets are similar to DMZs because they are used for the same purpose (providing access to some services/resources without exposing the whole intranet). The article also states that an extranet is a part of a VPN, and this TechNet article also states that extranet access is often implemented similarly to remote intranet access, e.g. with a VPN. The TechNet article also says that commonly the extranet is hosted inside the DMZ. This Pearson article says "Although [the DMZ] is technically located within the intranet, [it] can serve as the extranet as well". This is slightly confusing. Consider this scenario: A company has a B2C website hosted in the DMZ. The website can be accessed from anywhere, but requires user authentication. The underlying web app has its database inside the intranet and also interacts with some web services that are hosted inside the intranet (i.e. it accesses intranet resources). The way I see it, the website does effectively offer a restricted access to the intranet. But can it be considered an extranet? If we take the Wikipedia definition of an extranet literally - "An extranet is a computer network that allows controlled access from outside of an organization's intranet" - I think it can. Let's say that the above can't be considered an extranet. What if we change the scenario slightly, and say it's a B2B website, where the access is e.g. limited to connections coming from a specific business partner (by using site-to-site VPN, for example). In this case it surely is an extranet, right? If this is the case, then the difference between extranet services and any other services hosted in the DMZ is simply access restrictions?

    Read the article

  • How to setup multiple Apache SSL sites using multiple IP addresses

    - by Jeff
    How do you setup a single Apache2 config to host multiple HTTPS sites each on their own IP address? There will also be multiple HTTP sites on just a single IP address. I do not want to use Server Name Indication (SNI) as described here, and I'm only concerned with the important top-level Apache directives. That is, I just need to know the skeleton of how my config should look. The basic setup looks like this: Hosted on 1.1.1.1:80 (HTTP) - example.com - example.net - example.org Hosted on 2.2.2.2:443 (HTTPS) - secure.com Hosted on 3.3.3.3:443 (HTTPS) - secure.net Hosted on 4.4.4.4:443 (HTTPS) - secure.org And here are the important config directives I have so far, which is the closest I've come to a working iteration, but still no dice. I know I'm close, just need a little push in the right direction. Listen 1.1.1.1:80 Listen 2.2.2.2:443 Listen 3.3.3.3:443 Listen 4.4.4.4:443 NameVirtualHost 1.1.1.1:80 NameVirtualHost 2.2.2.2:443 NameVirtualHost 3.3.3.3:443 NameVirtualHost 4.4.4.4:443 # HTTP VIRTUAL HOSTS: <VirtualHost 1.1.1.1:80> ServerName example.com DocumentRoot /home/foo/example.com </VirtualHost> <VirtualHost 1.1.1.1:80> ServerName example.net DocumentRoot /home/foo/example.net </VirtualHost> <VirtualHost 1.1.1.1:80> ServerName example.org DocumentRoot /home/foo/example.org </VirtualHost> # HTTPS VIRTUAL HOSTS: <VirtualHost 2.2.2.2:443> ServerName secure.com DocumentRoot /home/foo/secure.com SSLEngine on SSLCertificateFile /home/foo/ssl/secure.com.crt SSLCertificateKeyFile /home/foo/ssl/secure.com.key SSLCACertificateFile /home/foo/ssl/ca.txt </VirtualHost> <VirtualHost 3.3.3.3:443> ServerName secure.net DocumentRoot /home/foo/secure.net SSLEngine on SSLCertificateFile /home/foo/ssl/secure.net.crt SSLCertificateKeyFile /home/foo/ssl/secure.net.key SSLCACertificateFile /home/foo/ssl/ca.txt </VirtualHost> <VirtualHost 4.4.4.4:443> ServerName secure.org DocumentRoot /home/foo/secure.org SSLEngine on SSLCertificateFile /home/foo/ssl/secure.org.crt SSLCertificateKeyFile /home/foo/ssl/secure.org.key SSLCACertificateFile /home/foo/ssl/ca.txt </VirtualHost> For what it's worth, I prefer to have each of my SSL sites on their own IP instead of including one of them on the primary VHOST IP. Any links which show a standard setup would be more than welcome!

    Read the article

  • Exchange 2007 and migrating only some users under a shared domain name

    - by DomoDomo
    I'm in the process of moving two law firms to hosted Exchange 2007, a service that the consulting company I work for offers. Let's call these two firms Crane Law and Poole Law. These two firms were ONE firm just six months ago, but split. So they have three email domains: Old Firm: craneandpoole.com New Firm 1: cranelaw.com New Firm 2: poolelaw.com Both Firm 1 & Firm 2 use craneandpoole.com email addresses, as for the other two domains, only people who work at the respective firm use that firm's domain name, natch. Currently these two firms are still using the same pre-split internal Exchange 2007 server, where MX records for all three domains point. Here's the problem. I'm not moving both companies at the same time. I'm moving Crane Law two weeks before Poole Law. During this two weeks, both companies need to be able to: Continue to receive emails addressed to craneandpoole.com Send emails between firms, using cranelaw.com and poolelaw.com accounts I also have a third problem: I'd like to setup all three domains in my hosting infrastructure way ahead of time, to make my own life easier What would solve all my problems would be, if there is some way I can tell Exchange 2007, even though this domain exists locally forward on the message to the outside world using public MX record as a basis for where to send it (or if I could somehow create a route for it statically that would work too). If this doesn't work, to address points #1 when I migrate Crane Law, I will delete all references locally to cranelaw.com on their current Exchange server, and setup individual forwards for each of their craneandpool.com mailboxes to forward to our hosted exchange server. This will also take care of point #2, since the cranelaw.com won't be there locally, when poolelaw.com tries to send to cranelaw.com, public MX records will be used for mail routing decisions and go to my hosted exchange. The bummer of that though is, I won't be able to setup poolelaw.com ahead of time in hosted Exchange, will have to wait to do it day of :( Sorry for the long and confusing post. Just wondering if there is a better or simpler way to do what I want? Three tier forests and that kind of thing are out, this is just a two week window where they won't be in the same place.

    Read the article

  • grouping two sites under domain and sub domain

    - by Dave
    I have 2 websites a main website hosted at fasthosts and an e-commerce website hosted at Vidahost. I want to combine both websites under the same domain set. Main site would be www.mydomain.com Store site would be shop.mydomain.com I want to keep the directory path showing on the shop subdomain so what was previously www.mystore.com/product/hat would become shop.mydomain.com/product/hat How can I accomplish this, have already created the subdomain on fasthosts and setup web forwarding to the store but the directory paths do not show.

    Read the article

  • Can Azure host ColdFusion?

    - by mbursill
    A friend has a site developed in ColdFusion with MySQL and is looking for better cost-effective hosting as the traffic scales up rapidly. Azure comes to mind. I haven't used Azure myself, however, I believe it is possible to setup and interact with the web-server via RDP into a hosted Virtual Machine? I am curious if ColdFusion can be installed in the hosted Azure VM. Also, would the site have to be tweaked to run on Azure SQL, or could it continue to use MySQL? Thanks.

    Read the article

  • Linux server became extremely slow

    - by Ariel Aharonson
    I have a file sharing website, and my files hosted in a server with those system specifications: 32GB RAM 12x3TB 2x Intel Quad Core E5620 I have files in this server up to 4gb for each file. 446gb is full (/36TB) [root@hosted-by ~]# df -h Filesystem Size Used Avail Use% Mounted on /dev/sda2 50G 2.7G 44G 6% / tmpfs 16G 0 16G 0% /dev/shm /dev/sda1 97M 57M 36M 62% /boot /dev/mapper/VolGroup01-LogVol00 33T 494G 33T 2% /home And take a look at this: Why is the wa% so high? (I think that what makes the server to be so slow)

    Read the article

  • How to integrate a mirror WS without client reconfiguration?

    - by tzup
    I have a web service hosted by IIS server 1 and another web service hosted by IIS server 2. Is there a way to have the WS on server 2 automatically pick up when the WS on server 1 is unavailable, without having to reconfigure the clients (which are desktop applications in this case). There must be some tools that perform such tasks, please help. Thank you. EDIT The two web services expose the same functionality, so basically I am trying to setup a high-availability cluster (ie failover cluster)

    Read the article

  • Windows 7 accounts on a 2008r2 DC keep getting locked out randomly

    - by Matt
    As the title states, this happens randomly to Windows 7 accounts on our Windows 2008R2 domain controller. We just had this start happening after changing from 123together hosted exchange to Rackspace hosted exchange. Also around this time our passwords on the DC started expiring, but not the exact day, and everyone has different days they need to change it before. It has only affected 10 out of 30 accounts, and I see no link between them. What are some fixes I should run or things to look for?

    Read the article

  • In Windows 7, is there a way to know how much memory a service is using?

    - by tigrou
    In windows 7, is there a way (by using common interface or a custom utility) to know how much memory a specific windows service is using ? It seems most services are hosted by svchost.exe processes ( some svchosts.exe processes seems to host tons of services). While it is possible to know which services are hosted by a specific process, I found no way to get information about how much memory a service take.

    Read the article

  • How to transision from exchange 2003 to 2010

    - by John
    I want to upgrade exchange from 2003 to 2010, but now i have just one server having exchange 2003 mailbox, and its just working with internal network. for receiving and sending email to outside, we have hosted mail server and we use Native POP3 to download mails from hosted server to our exchange server. and now we want to have 2 server. and also want to deploy edge transport role to send and receive mail from outside so what will be the best to upgrade to 2010 ?

    Read the article

< Previous Page | 123 124 125 126 127 128 129 130 131 132 133 134  | Next Page >