Search Results

Search found 28159 results on 1127 pages for 'main thread'.

Page 127/1127 | < Previous Page | 123 124 125 126 127 128 129 130 131 132 133 134  | Next Page >

  • Python Tkinter after loop not working fast enough

    - by user2658538
    I am making a simple metronome where it plays a tick sound every few milliseconds depending on the bpm and plays the sound using the winsound module. I use tkinter because there will be a gui component later but for now the metronome code is working, it plays the sound at a constant rate, but even though I set the after loop to play the sound every few milliseconds, it waits longer and the beat is slower than it should be. Is it a problem with the code or a problem with the way I calculate the time? Thanks. Here is my code. from Tkinter import * import winsound,time,threading root=Tk() c=Canvas(root) c.pack() class metronome(): def __init__(self,root,canvas,tempo=100): self.root=root self.root.bind("<1>",self.stop) self.c=canvas self.thread=threading.Thread(target=self.play) self.thread.daemon=True self.pause=False self.tempo=tempo/60.0 self.tempo=1.0/self.tempo self.tempo*=1000 def play(self): winsound.PlaySound("tick.wav",winsound.SND_FILENAME) self.sound=self.c.after(int(self.tempo),self.play) def stop(self,e): self.c.after_cancel(self.sound) beat=metronome(root,c,120) beat.thread.start() root.mainloop()

    Read the article

  • [C++] Is it possible to use threads to speed up file reading ?

    - by Mister Mystère
    Hi there, I want to read a file as fast as possible (40k lines) [Edit : the rest is obsolete]. Edit: Andres Jaan Tack suggested a solution based on one thread per file, and I want to be sure I got this (thus this is the fastest way) : One thread per entry file reads it whole and stocks its content in a container associated (- as many containers as there are entry files) One thread calculates the linear combination of every cell read by the input threads, and stocks the results in the exit container (associated to the output file). One thread writes by block (every 4kB of data, so about 10 lines) the content of the output container. Should I deduce that I must not use m-mapped files (because the program's on standby waiting for the data) ? Thanks aforehand. Sincerely, Mister mystère.

    Read the article

  • g-wan - reproducing the performance claims

    - by user2603628
    Using gwan_linux64-bit.tar.bz2 under Ubuntu 12.04 LTS unpacking and running gwan then pointing wrk at it (using a null file null.html) wrk --timeout 10 -t 2 -c 100 -d20s http://127.0.0.1:8080/null.html Running 20s test @ http://127.0.0.1:8080/null.html 2 threads and 100 connections Thread Stats Avg Stdev Max +/- Stdev Latency 11.65s 5.10s 13.89s 83.91% Req/Sec 3.33k 3.65k 12.33k 75.19% 125067 requests in 20.01s, 32.08MB read Socket errors: connect 0, read 37, write 0, timeout 49 Requests/sec: 6251.46 Transfer/sec: 1.60MB .. very poor performance, in fact there seems to be some kind of huge latency issue. During the test gwan is 200% busy and wrk is 67% busy. Pointing at nginx, wrk is 200% busy and nginx is 45% busy: wrk --timeout 10 -t 2 -c 100 -d20s http://127.0.0.1/null.html Thread Stats Avg Stdev Max +/- Stdev Latency 371.81us 134.05us 24.04ms 91.26% Req/Sec 72.75k 7.38k 109.22k 68.21% 2740883 requests in 20.00s, 540.95MB read Requests/sec: 137046.70 Transfer/sec: 27.05MB Pointing weighttpd at nginx gives even faster results: /usr/local/bin/weighttp -k -n 2000000 -c 500 -t 3 http://127.0.0.1/null.html weighttp - a lightweight and simple webserver benchmarking tool starting benchmark... spawning thread #1: 167 concurrent requests, 666667 total requests spawning thread #2: 167 concurrent requests, 666667 total requests spawning thread #3: 166 concurrent requests, 666666 total requests progress: 9% done progress: 19% done progress: 29% done progress: 39% done progress: 49% done progress: 59% done progress: 69% done progress: 79% done progress: 89% done progress: 99% done finished in 7 sec, 13 millisec and 293 microsec, 285172 req/s, 57633 kbyte/s requests: 2000000 total, 2000000 started, 2000000 done, 2000000 succeeded, 0 failed, 0 errored status codes: 2000000 2xx, 0 3xx, 0 4xx, 0 5xx traffic: 413901205 bytes total, 413901205 bytes http, 0 bytes data The server is a virtual 8 core dedicated server (bare metal), under KVM Where do I start looking to identify the problem gwan is having on this platform ? I have tested lighttpd, nginx and node.js on this same OS, and the results are all as one would expect. The server has been tuned in the usual way with expanded ephemeral ports, increased ulimits, adjusted time wait recycling etc.

    Read the article

  • Accessing Identity.AuthenticationType

    - by Tewr
    While implementing a custom authentication type in a wcf service, I'm trying to read the property IIdentity.AuthenticationType using the call Thread.CurrentPrincipal.Identity.AuthenticationType. Unless the account running the service is local administrator, UnauthorizedAccessException is thrown when accessing this property, much like described in this support thread. I can however reset the Thread.CurrentPrincipalobject without hassle, thus altering the Authentication Type - But read it, I cannot. Is running as an administrator the only way here or is there some trick to let the user running the service "just" access this property?

    Read the article

  • [Netbeans 6.9] Java MethodOverloading error with double values

    - by Nimitips
    Here is a part of my code I'm having trouble with: ===Class Overload=== public class Overload { public void testOverLoadeds() { System.out.printf("Square of integer 7 is %d\n",square(7)); System.out.printf("Square of double 7.5 is %d\n",square(7.5)); }//..end testOverloadeds public int square(int intValue) { System.out. printf("\nCalled square with int argument: %d\n",intValue); return intValue * intValue; }//..end square int public double square(double doubleValue) { System.out.printf("\nCalled square with double argument: %d\n", doubleValue); return doubleValue * doubleValue; }//..end square double }//..end class overload ===Main=== public static void main(String[] args) { Overload methodOverload = new Overload(); methodOverload.testOverLoadeds(); } It compiles with no error, however when I try to run it the output is: Called square with int argument: 7 Square of integer 7 is 49 Exception in thread "main" java.util.IllegalFormatConversionException: d != java.lang.Double at java.util.Formatter$FormatSpecifier.failConversion(Formatter.java:3999) at java.util.Formatter$FormatSpecifier.printInteger(Formatter.java:2709) at java.util.Formatter$FormatSpecifier.print(Formatter.java:2661) at java.util.Formatter.format(Formatter.java:2433) at java.io.PrintStream.format(PrintStream.java:920) at java.io.PrintStream.printf(PrintStream.java:821) at methodoverload.Overload.square(Overload.java:19) at methodoverload.Overload.testOverLoadeds(Overload.java:8) at methodoverload.Main.main(Main.java:9) Called square with double argument:Java Result: 1 What am I doing wrong? I'm on Ubuntu 10.10, Netbeans 6.9. Thanks.

    Read the article

  • Problem inserting Pygames on a wxPython panel using Boa Constructor

    - by Kohwalter
    Hello, im new in Python so im hoping to to get some help to figure out what is going wrong. Im trying to run a Pygames from within wxPython panel (made on Boa Constructor). To do that i followed the instructions on the http://wiki.wxpython.org/IntegratingPyGame but still it isn't working. Here is the Panel code that was used to make the integration: class PG_panel(wx.Panel): def __init__(self, ID, name, parent, mypos, mysize): # pygame is imported in this class # make it globally available global pygame #self.Fit() wx.Panel.__init__(self, id=wxID_FRMMAINPANELTABULEIRO, name='panelTabuleiro', parent=self, pos=(16, 96), size=mysize) # pygame uses SDL, set the environment variables os.environ['SDL_WINDOWID'] = str(self.GetHandle()) os.environ['SDL_VIDEODRIVER'] = 'windib' # do the pygame stuff after setting the environment variables import pygame pygame.display.init() # create the pygame window/screen screen = pygame.display.set_mode(464, 464) #(424,450) # start the thread instance self.thread = PG_thread(screen) self.thread.start() def __del__(self): self.thread.stop() And im trying to use that panel on an interface from Boa Constructor, here is the code: class frmMain(wx.Frame): def _init_ctrls(self, prnt): # generated method, don't edit wx.Frame.__init__(self, id=wxID_FRMMAIN, name='frmMain', parent=prnt, pos=wx.Point(660, 239), size=wx.Size(815, 661), style=wx.DEFAULT_FRAME_STYLE, title='Grupo 1 - Jogo de Damas') self._init_utils() self.SetClientSize(wx.Size(799, 623)) self.SetBackgroundColour(wx.Colour(225, 225, 225)) self.SetMinSize(wx.Size(784, 650)) self.Center(wx.BOTH) self.SetMenuBar(self.menuBar1) #here begins my code mysize = (464, 464) mypos = (16, 96) self.panelTabuleiro = PG_panel(wxID_FRMMAINPANELTABULEIRO, 'panelTabuleiro', self, mypos, mysize) The original that was auto-made by the Boa Constructor is the following: self.panelTabuleiro = wx.Panel(id=wxID_FRMMAINPANELTABULEIRO, name='panelTabuleiro', parent=self, pos=wx.Point(16, 96), size=wx.Size(464, 464), style=wx.TAB_TRAVERSAL) self.panelTabuleiro.SetBackgroundColour(wx.Colour(232, 249, 240)) self.panelTabuleiro.SetThemeEnabled(True) self.panelTabuleiro.SetHelpText('Tabuleiro') The error that it gives is: Type error: in method 'new_Panel', expected argument 1 of type 'wxWindow*1 Exception AttributeError: "'PG_panel' object has no attribute 'thread' in ignored Any thoughts ? I appreciate any help. Thank you.

    Read the article

  • C++ catch constructor exception

    - by aaa
    hi. I do not seem to understand how to catch constructor exception. Here is relevant code: struct Thread { rysq::cuda::Fock fock_; template<class iterator> Thread(const rysq::cuda::Centers &centers, const iterator (&blocks)[4]) : fock_() { if (!fock_) throw; } }; Thread *ct; try { ct = new Thread(centers_, blocks); } catch(...) { return false; } // catch never happens, So catch statement do not execute and I get unhandled exception. What did I do wrong? this is straight C++ using g++.

    Read the article

  • force exit from readline() function.

    - by Sasun Hambardzumyan
    I am writing program in c++ which runs GNU readline in separate thread. When main thread is exited I need to finish the thread in which readline() function is called. The readline() function is returned only when standart input came (enter pressed). Is there any way to send input to application or explicitly return from readline function? Thanks in advance.

    Read the article

  • Getting problem in threading in JAVA

    - by chetans
    In this program i want to stop GenerateImage & MovingImage Thread both... And i want to start those threads from begining. Can u send me the solution? Here is the code........ package Game; import java.applet.Applet; import java.awt.Color; import java.awt.Dimension; import java.awt.Graphics; import java.awt.Image; import java.awt.MediaTracker; import java.awt.event.KeyEvent; import java.awt.event.KeyListener; import java.net.MalformedURLException; import java.net.URL; public class ThreadInApplet extends Applet implements KeyListener { private static final long serialVersionUID = 1L; Image[] asteroidImage; Image spaceshipImage; String levelstr="Easy Level"; int[] XPos,YPos; int number=0,XPosOfSpaceship,YPosOfSpaceship,NoOfObstacles=5,speed=1,level=1,spaceBtnPressdCntr=0; boolean gameStart=false,pauseGame=false,collideUp=false,collideDown=false,collideLeft=false,collideRight=false; private Image offScreenImage; private Dimension offScreenSize; private Graphics offScreenGraphics; Thread GenerateImages,MoveImages; public void init() { try { GenerateImages=new Thread () //thread to create obstacles { synchronized public void run () { for(int g=0;g<NoOfObstacles;g++) { try { sleep(1000); } catch (InterruptedException e) { e.printStackTrace(); } number++; // Temporary counter to count the no of obstacles created } } } ; MoveImages=new Thread () //thread to move obstacles { @SuppressWarnings("deprecation") synchronized public void run () { while(YPos[NoOfObstacles-1]!=600) { pauseGame=false; if(collide()==true) { GenerateImages.suspend(); repaint(); } else GenerateImages.resume(); for(int l=0;l<number;l++) { if(collide()==false) YPos[l]++; else GenerateImages.suspend(); } repaint(); try { sleep(speed); } catch (InterruptedException e) { e.printStackTrace(); } } if(YPos[NoOfObstacles-1]>=600) //level complete state { level++; try { levelUpdation(level); System.out.println("aahe"); } catch (MalformedURLException e) { e.printStackTrace(); } repaint(); } } }; initialPos(); spaceshipImage=getImage(new URL(getCodeBase(),"images/space.png")); for(int i=0;i<NoOfObstacles;i++) { asteroidImage[i]=getImage(new URL(getCodeBase(),"images/asteroid.png")); XPos[i]=(int) (Math.random()*700); YPos[i]=0; } MediaTracker tracker = new MediaTracker (this); for(int i=0;i<NoOfObstacles;i++) { tracker.addImage (asteroidImage[i], 0); } } catch (MalformedURLException e) { e.printStackTrace(); } setBackground(Color.black); addKeyListener(this); } //Sets initial positions of spaceship & obstacle images------------------------------------------------------ public void initialPos() throws MalformedURLException { asteroidImage=new Image[NoOfObstacles]; XPos=new int[NoOfObstacles]; YPos=new int[NoOfObstacles]; XPosOfSpaceship=getWidth()/2-35; YPosOfSpaceship=getHeight()-100; collideUp = false; collideDown=false; collideLeft=false; collideRight=false; } //level finished updations------------------------------------------------------------------------------ @SuppressWarnings("deprecation") public void levelUpdation(int level) throws MalformedURLException { NoOfObstacles=NoOfObstacles+20; speed=speed-3; System.out.println(NoOfObstacles+" "+speed); pauseGame=true; initialPos(); repaint(); } //paint method of graphics to print the messages--------------------------------------------------------- public void paint(Graphics g) { g.setColor(Color.white); if(gameStart==false) { g.drawString("SPACE to start", (getWidth()/2)-15, getHeight()/2); g.drawString(levelstr, (getWidth()/2), getHeight()/2+20); } if(level>1) { if(level==2) levelstr="Medium Level"; else levelstr="High Level"; g.drawString("Level Complete ", (getWidth()/2)-15, getHeight()/2); g.drawString(levelstr, (getWidth()/2), getHeight()/2+20); //g.drawString("SPACE to start", (getWidth()/2)-15, getHeight()/2+40); } for(int n=0;n<number;n++) { if(n>0) g.drawImage(asteroidImage[n],XPos[n],YPos[n],this); } g.drawImage(spaceshipImage,XPosOfSpaceship,YPosOfSpaceship,this); } //update method of graphics to print the messages--------------------------------------------------------- @SuppressWarnings("deprecation") public void update(Graphics g) { Dimension d = size(); if((offScreenImage == null) || (d.width != offScreenSize.width) || (d.height != offScreenSize.height)) { offScreenImage = createImage(d.width, d.height); offScreenSize = d; offScreenGraphics = offScreenImage.getGraphics(); } offScreenGraphics.clearRect(0, 0, d.width, d.height); paint(offScreenGraphics); g.drawImage(offScreenImage, 0, 0, null); } public void keyReleased(KeyEvent arg0){} public void keyTyped(KeyEvent arg0) {} //---------------------Key pressed event to start game & to move the spaceship-------------------------------------- public void keyPressed(KeyEvent e) { if(e.getKeyCode()==32) { spaceBtnPressdCntr++; if(spaceBtnPressdCntr==1) { gameStart=true; GenerateImages.start(); MoveImages.start(); } } if(gameStart==true) { if(e.getKeyCode()==37) { new Thread () { @SuppressWarnings("deprecation") synchronized public void run () { for(int cnt1=1;cnt1<=10;cnt1++) { if(collide()==true && collideLeft == true) { GenerateImages.suspend(); } else { if(XPosOfSpaceship>0) XPosOfSpaceship--; } } repaint(); } }.start(); } if(e.getKeyCode()==38) { new Thread () { @SuppressWarnings("deprecation") synchronized public void run () { for(int cnt1=1;cnt1<=10;cnt1++) { if(collide()==true && collideUp == true) { GenerateImages.suspend(); } else { if(YPosOfSpaceship>10) YPosOfSpaceship--; } } repaint(); } }.start(); } if(e.getKeyCode()==39) { new Thread () { @SuppressWarnings("deprecation") synchronized public void run () { for(int cnt1=1;cnt1<=10;cnt1++) { if(collide()==true && collideRight == true) { GenerateImages.suspend(); } else { if(XPosOfSpaceship<750) XPosOfSpaceship++; } } repaint(); } }.start(); } if(e.getKeyCode()==40) { new Thread () { @SuppressWarnings("deprecation") synchronized public void run () { for(int cnt1=1;cnt1<=10;cnt1++) { if(collide()==true && collideDown == true) { GenerateImages.suspend(); } else { if(YPosOfSpaceship<550) YPosOfSpaceship++; } } repaint(); } }.start(); } } } //------------------------------Collision checking between Spaceship & obstacles------------------------------ public boolean collide() { int x1,y1,x2,y2,x3,y3,x4,y4; //coordinates of obstacles int a1,b1,a2,b2,a3,b3,a4,b4; //coordinates of spaceship a1 =XPosOfSpaceship; b1=YPosOfSpaceship; a2=a1+spaceshipImage.getWidth(this); b2=b1; a3=a1; b3=b1+spaceshipImage.getHeight(this); a4=a2; b4=b3; for(int a=0;a<number;a++) { x1 =XPos[a]; y1=YPos[a]; x2=x1+asteroidImage[a].getWidth(this); y2=y1; x3=x1; y3=y1+asteroidImage[a].getHeight(this); x4=x2; y4=y3; /********checking asteroid touch spaceship from up direction********/ if(y3==b1 && x4>=a1 && x4<=a2) { collideUp = true; collideDown=false; collideLeft=false; collideRight=false; return(true); } if(y3==b1 && x3>=a1 && x3<=a2) { collideUp = true; collideDown=false; collideLeft=false; collideRight=false; return(true); } /********checking asteroid touch spaceship from left direction******/ if(x2==a1 && y4>=b1 && y4<=b3) { collideLeft=true; collideUp = false; collideDown=false; collideRight=false; return(true); } if(x2==a1 && y2>=b1 && y2<=b3) { collideLeft=true; collideUp = false; collideDown=false; collideRight=false; return(true); } /********checking asteroid touch spaceship from right direction*****/ if(x1==a2 && y3>=b2 && y3<=b4) { collideRight=true; collideLeft=false; collideUp = false; collideDown=false; return(true); } if(x1==a2 && y1>=b2 && y1<=b4) { collideRight=true; collideLeft=false; collideUp = false; collideDown=false; return(true); } /********checking asteroid touch spaceship from down direction*****/ if(y1==b3 && x2>=a3 && x2<=a4) { collideDown=true; collideRight=false; collideLeft=false; collideUp = false; return(true); } if(y1==b3 && x1>=a3 && x1<=a4) { collideDown=true; collideRight=false; collideLeft=false; collideUp = false; return(true); } } return(false); } }

    Read the article

  • Android Signal 11 (SIGSEGV)

    - by Naturjoghurt
    I read many posts here and on other sites, but can not find the problem creating my Error: I use an AsyncTask because I want to easily manipulate the UI Thread before and after Execution. In doInBackground I create a ThreadPoolExecutor and execute Runnables. If I only execute 1 Runnable with the Executor, there is no Problem, but if I execute another Runnable I get following Error: 06-26 18:00:42.288: A/libc(25073): Fatal signal 11 (SIGSEGV) at 0x7f486162 (code=1), thread 25106 (pool-1-thread-2) 06-26 18:00:42.304: D/dalvikvm(25073): GC_CONCURRENT freed 119K, 2% free 8908K/9056K, paused 4ms+4ms, total 45ms 06-26 18:00:42.327: I/System.out(25073): In Check All with Prefix: a and Length: 4 06-26 18:00:42.390: I/DEBUG(126): *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** 06-26 18:00:42.390: I/DEBUG(126): Build fingerprint: 'google/yakju/maguro:4.2.2/JDQ39/573038:user/release-keys' 06-26 18:00:42.390: I/DEBUG(126): Revision: '9' 06-26 18:00:42.390: I/DEBUG(126): pid: 25073, tid: 25106, name: pool-1-thread-2 >>> de.uni_duesseldorf.cn.distributed_computing2 <<< 06-26 18:00:42.390: I/DEBUG(126): signal 11 (SIGSEGV), code 1 (SEGV_MAPERR), fault addr 7f486162 ... 06-26 18:00:42.538: I/DEBUG(126): memory map around fault addr 7f486162: 06-26 18:00:42.538: I/DEBUG(126): 60292000-60391000 06-26 18:00:42.538: I/DEBUG(126): (no map for address) 06-26 18:00:42.538: I/DEBUG(126): bed14000-bed35000 [stack] I set up the ThreadPoolExecutor like this: // numberOfPackages: Number of Runnables to be executed public void initializeThreadPoolExecutor (int numberOfPackages) { int corePoolSize = Runtime.getRuntime().availableProcessors(); int maxPoolSize = numberOfPackages; long keepAliveTime = 60; final BlockingQueue workingQueue = new LinkedBlockingQueue(); executor = new ThreadPoolExecutor(corePoolSize, maxPoolSize, keepAliveTime, TimeUnit.SECONDS, workingQueue); } I have no clue, why it fails when starting the second Thread. Maybe Memory Leaks? Any Help appreciated. Thanks in Advance

    Read the article

  • Java threads problem

    - by MyNameIs
    Hi! I have a problem with java threads: public class MyClass{ public void Core(){ runTools(); //here I would like to call runTools() method } public void runTools(){ final String run_tool ="cmd.exe /C sources.exe"; Runnable doRun = new Runnable() { public void run() { try { Process tool_proc = Runtime.getRuntime().exec(run_tool); } catch (IOException e) { e.printStackTrace(); } } }; Thread th = new Thread(doRun); th.start(); } } If I do this, then I don't know why, but the thread doesn't work. Please give me some ideas to create a thread. I have already been seen lots of examples, but I should some code such as my example here. Thanks!

    Read the article

  • The linking is not done (gcc compilation)

    - by Moons
    Hello everyone! So i have this issue : i am declaring some extern global variables in my C program. If I don't use the -c option for gcc, i get undefined references errors. But with that -c option, the linking is not done, which means that i don't have an executable generated. So how do I solve this? Here is my makefile. As I am not good with writing makefiles, I took one from another project then I changed a few things. So maybe I'm missing something here. # Makefile calculPi INCL = -I$(INCL_DIR) DEFS = -D_DEBUG_ CXX_FLAGS =-g -c -lpthread -lm CXX = gcc $(CXX_FLAGS) $(INCL) $(DEFS) LINK_CXX = gcc OBJ = approx.o producteur.o sequentialApproximation.o main.o LINKOBJ = approx.o producteur.o sequentialApproximation.o main.o BIN = calculPi.exe RM = rm -fv all: calculPi.exe clean: ${RM} *\~ \#*\# $(OBJ) clean_all: clean ${RM} $(BIN) cleanall: clean ${RM} $(BIN) $(BIN): $(OBJ) $(CXX) $(LINKOBJ) -o "calculPi.exe" main.o: main.c $(CXX) main.c -o main.o $(CXX_FLAGS) approx.o: approx.c approx.h $(CXX) -c approx.c -o approx.o $(CXX_FLAGS); producteur.o: producteur.c producteur.h $(CXX) -c producteur.c -o producteur.o $(CXX_FLAGS); sequentialApproximation.o : sequentialApproximation.c sequentialApproximation.h $(CXX) -c sequentialApproximation.c -o sequentialApproximation.o $(CXX_FLAGS);

    Read the article

  • Accessing vars from another clojure namespace?

    - by erikcw
    In my main namespace, I have a top level var named "settings" which is initialized as an empty {}. My -main fn sets the contents of settings using def and conj based on some command line args (different database hosts for production/development, etc). I'm trying to access the contents of this map from another namespace to pull out some of the settings. When I try to compile with lein into an uberjar, I get a traceback saying "No such var: lb/settings". What am I missing? Is there a more idiomatic way to handle app wide settings such as these? Is it safe to use "def" inside of -main like I am, or should I be use an atom or ref to make this threadsafe? Thanks! (ns main (:use ...) (:gen-class)) (def settings {}) (defn -main [& args] (with-command-line-args... ;set devel? based on args (if (true? devel?) (def settings (conj settings {:mongodb {:host "127.0.0.1"} :memcached {:host "127.0.0.1"}})) (def settings (conj settings {:mongodb {:host "PRODUCTION_IP"} :memcached {:host "PRODUCTION_IP"}}))) ;file2.clj (ns some-other-namespace (:require [main :as lb] ...) ;configure MongoDB (congo/mongo! :db "dbname" :host (:host (mongodb lb/settings)))) ...

    Read the article

  • No operations allowed after statement closed issue

    - by Washu
    I have the next methods in my singleton to execute the JDBC connections public void openDB() throws ClassNotFoundException, IllegalAccessException, InstantiationException, SQLException { Class.forName("com.mysql.jdbc.Driver").newInstance(); String url = "jdbc:mysql://localhost/mbpe_peru";//mydb conn = DriverManager.getConnection(url, "root", "admin"); st = conn.createStatement(); } public void sendQuery(String query) throws SQLException { st.executeUpdate(query); } public void closeDB() throws SQLException { st.close(); conn.close(); } And I'm having a problem in a void where i have to call this twice. private void jButton1ActionPerformed(ActionEvent evt) { Main.getInstance().openDB(); Main.getInstance().sendQuery("call insertEntry('"+EntryID()+"','"+SupplierID()+"');"); Main.getInstance().closeDB(); Main.getInstance().openDB(); for(int i=0;i<dataBox.length;i++){ Main.getInstance().sendQuery("call insertCount('"+EntryID()+"','"+SupplierID()+"','"+BoxID()+"'); Main.getInstance().closeDB(); } } I have already tried to keep the connection open and send the 2 querys and after that closed and it didnt work... The only way it worked was to not use the methods, declare the commands for the connection and use different variables for the connection and the statement. I thought that if i close the Connecion and the Statement I could use the variable once again since is a method but I'm not able to. Is there any way to solve this using my methods for the JDBC connection?

    Read the article

  • Basic QT Event handling / Threading questions ?

    - by umanga
    Greetings , I am new to QT (4.6) and have some basic questions regarding its event mechanism.I come from Swing background so I am trying to compare it with QT. 1) Does Event-processing-loop run in seperate thread? (like EventDispatch thread in Swing) ? 2) If we open several 'QMainWindow' do they run in several threads? 3) Whats the best way to run an intensive process in a seperate thread? (like SwingWorker in Swing ? ) 4) If intesive-process runs in a seperate thread ,is it possible to call UI methods like update(),repaint() from that process? thanks in advance.

    Read the article

  • Why is volatile not considered useful in multithreaded C or C++ programming?

    - by Michael E
    As demonstrated in this answer I recently posted, I seem to be confused about the utility (or lack thereof) of volatile in multi-threaded programming contexts. My understanding is this: any time a variable may be changed outside the flow of control of a piece of code accessing it, that variable should be declared to be volatile. Signal handlers, I/O registers, and variables modified by another thread all constitute such situations. So, if you have a global int foo, and foo is read by one thread and set atomically by another thread (probably using an appropriate machine instruction), the reading thread sees this situation in the same way it sees a variable tweaked by a signal handler or modified by an external hardware condition and thus foo should be declared volatile (or, for multithreaded situations, accessed with memory-fenced load, which is probably a better a solution). How and where am I wrong?

    Read the article

  • wxpython - Running threads sequentially without blocking GUI

    - by ryantmer
    I've got a GUI script with all my wxPython code in it, and a separate testSequences module that has a bunch of tasks that I run based on input from the GUI. The tasks take a long time to complete (from 20 seconds to 3 minutes), so I want to thread them, otherwise the GUI locks up while they're running. I also need them to run one after another, since they all use the same hardware. (My rationale behind threading is simply to prevent the GUI from locking up.) I'd like to have a "Running" message (with varying number of periods after it, i.e. "Running", "Running.", "Running..", etc.) so the user knows that progress is occurring, even though it isn't visible. I'd like this script to run the test sequences in separate threads, but sequentially, so that the second thread won't be created and run until the first is complete. Since this is kind of the opposite of the purpose of threads, I can't really find any information on how to do this... Any help would be greatly appreciated. Thanks in advance! gui.py import testSequences from threading import Thread #wxPython code for setting everything up here... for j in range(5): testThread = Thread(target=testSequences.test1) testThread.start() while testThread.isAlive(): #wait until the previous thread is complete time.sleep(0.5) i = (i+1) % 4 self.status.SetStatusText("Running"+'.'*i) testSequences.py import time def test1(): for i in range(10): print i time.sleep(1) (Obviously this isn't the actual test code, but the idea is the same.)

    Read the article

  • Flowcharting functional programming languages

    - by Sadface
    Flowcharting. This ancient old practice that's been in use for over 1000 years now, being forced upon us poor students, without any usefulness (or so do I think). It might work well with imperative, sequentially running languages, but what about my beloved functional programming? Sadly, I'm forced to create a flow chart for my programm (that is written in Haskell). I imagine it being easy for something like this: main :: IO () main = do someInput <- getLine let upped = map toUpper someInput putStrLn upped Which is just 3 sequenced steps, fetching data, uppercasing it, outputting it. Things look worse this time: main :: IO () main = do someInput <- fmap toUpper getLine putStrLn someInput Or like this: main :: IO () main = interact (map toUpper) Okay, that was IO, you can handle that like an imperative language. What about pure functions? An actual example: onlyMatching :: String -> [FilePath] -> [FilePath] onlyMatching ext = filter f where f name = lower ('.' : ext) == (lower . takeExtension $ name) lower = map toLower How would you flowchart that last one?

    Read the article

  • threading and getting COM port of attached phone

    - by I__
    i have the following code: using System; using System.Collections.Generic; using System.ComponentModel; using System.Data; using System.Drawing; using System.Linq; using System.Text; using System.Windows.Forms; using System.Threading; namespace WindowsFormsApplication1 { public partial class Form1 : Form { public Form1() { InitializeComponent(); } public class ThreadWork { public static void DoWork() { } } private void Form1_Load(object sender, EventArgs e) { ThreadStart myThreadDelegate = new ThreadStart(ThreadWork.DoWork); Thread myThread = new Thread(myThreadDelegate); myThread.Start(); // Begin communications serialPort1.Open(); serialPort1.Write("AT+CMGF=1\r\n"); //Thread.Sleep(500); serialPort1.Write("AT+CNMI=2,2\r\n"); //Thread.Sleep(500); serialPort1.Write("AT+CSCA=\"+4790002100\"\r\n"); //Thread.Sleep(500); } private void serialPort1_DataReceived_1(object sender, System.IO.Ports.SerialDataReceivedEventArgs e) { string response = serialPort1.ReadLine(); this.BeginInvoke(new MethodInvoker(() => textBox1.AppendText(response + "\r\n"))); } } } what i am trying to do is send AT COMMANDS to my phone which is attached to the computer through USB how do i know how to configure the properties of the serial port? (like which COM is the phone on [it's attached through USB], what about baudrate and databits?) when i run the program nothing really happens, i would like to send AT COMMANDS to my phone and the textbox is there to receive the response from my phone this is my first time using threads. am i using them correctly? what is the purpose of it in the current example? is it to just have a delay between send a response? what am i doing wrong?

    Read the article

  • c# wpf command pattern

    - by evan
    I have a wpf gui which displays a list of information in separate window and in a separate thread from the main application. As the user performs actions in the main window the side window is updated. (For example if you clicked page down in the main window a listbox in the side window would page down). Right now the architecture for this application feels very messy and I'm sure there is a cleaner way to do it. It looks like this: Main Window contains a singleton SideWindowControl which communicates with an instance of the SideWindowDisplay using events - so, for example, the pagedown button would work like: 1) the event handler of the button on the main window calls SideWindowControl.PageDown() 2) in the PageDown() function a event is created and thrown. 3) finally the gui, ShowSideWindowDisplay is subscribing to the SideWindowControl.Actions event handles the event and actually scrolls the listbox down - note because it is in a different thread it has to do that by running the command via Dispatcher.Invoke() This just seems like a very messy way to this and there must be a clearer way (The only part that can't change is that the main window and the side window must be on different threads). Perhaps using WPF commands? I'd really appreciate any suggestions!! Thanks

    Read the article

  • c# threading and getting COM port of attached phone

    - by I__
    i have the following code: using System; using System.Collections.Generic; using System.ComponentModel; using System.Data; using System.Drawing; using System.Linq; using System.Text; using System.Windows.Forms; using System.Threading; namespace WindowsFormsApplication1 { public partial class Form1 : Form { public Form1() { InitializeComponent(); } public class ThreadWork { public static void DoWork() { } } private void Form1_Load(object sender, EventArgs e) { ThreadStart myThreadDelegate = new ThreadStart(ThreadWork.DoWork); Thread myThread = new Thread(myThreadDelegate); myThread.Start(); // Begin communications serialPort1.Open(); serialPort1.Write("AT+CMGF=1\r\n"); //Thread.Sleep(500); serialPort1.Write("AT+CNMI=2,2\r\n"); //Thread.Sleep(500); serialPort1.Write("AT+CSCA=\"+4790002100\"\r\n"); //Thread.Sleep(500); } private void serialPort1_DataReceived_1(object sender, System.IO.Ports.SerialDataReceivedEventArgs e) { string response = serialPort1.ReadLine(); this.BeginInvoke(new MethodInvoker(() => textBox1.AppendText(response + "\r\n"))); } } } what i am trying to do is send AT COMMANDS to my phone which is attached to the computer through USB how do i know how to configure the properties of the serial port? (like which COM is the phone on [it's attached through USB], what about baudrate and databits?) when i run the program nothing really happens, i would like to send AT COMMANDS to my phone and the textbox is there to receive the response from my phone this is my first time using threads. am i using them correctly? what is the purpose of it in the current example? is it to just have a delay between send a response? what am i doing wrong?

    Read the article

  • WM6x IMAPIAdviseSink::OnNotify threading issues

    - by violet313
    specifically WM6x, winCE5x Now my current understanding from trawling the msdn etal is that the IMAPIAdviseSink::OnNotify callback can be made from any old thread; from (ce)mapi or perhaps even from a third-party service provider. Under WM6x, i cannot seem to coax an in-thread response by invoking HrThisThreadAdviseSink, since while this function is declared in mapiutil.h, a definition appears not to exist (in cemapi.lib or wherever??) ~But i notice that all the OnNotify callbacks i receive derive from windows messages that i am receiving on my thread (=looks to me like an in-thread implementation in any case under cemapi)... So, can anyone confirm that this is infact always the case -or am i just getting lucky right now? ah, i should add that my advise source is IMAPISession::Advise erm i should also say that i might have cross-posted this on the msdn forum -but they're mostly numptys over there,,

    Read the article

  • Understanding java's native threads and the jvm

    - by Moev4
    I understand that the jvm is itself an application that turns the bytecode of the java executable into native machine code, but when using native threads I have some questions that I just cannot seem to answer. Does every thread create their own instance of the jvm to handle their particular execution? If not then does the jvm have to have some way to schedule which thread it will handle next, if so wouldn't this render the multi-threaded nature of java useless since only one thread can be ran at a time?

    Read the article

  • JPA atomic query/save for multithreaded app

    - by TofuBeer
    I am in the midst of changing my JPA code around to make use of threads. I have a separate entity manager and transaction for each thread. What I used to have (for the single threaded environment) was code like: // get object from the entity manager X x = getObjectX(jpaQuery); if(x == null) { x = new X(); x.setVariable(foo); entityManager.persist(x); } With that code in the multi threaded environment I am getting duplicate keys since, I assume, getObjectX returns null for a thread, then that thread is swapped out, the next thread calls getObjextX, also getting null, and then both threads will create and persist a new X(). Short of adding in synchronization, is there an atomic way to get/save-if-doesn't-exist a value with JPA or should I rethink my approach EDIT: I am using the latest Eclipselink and MySql 5.1

    Read the article

< Previous Page | 123 124 125 126 127 128 129 130 131 132 133 134  | Next Page >