Search Results

Search found 68483 results on 2740 pages for 'boost date time'.

Page 1278/2740 | < Previous Page | 1274 1275 1276 1277 1278 1279 1280 1281 1282 1283 1284 1285  | Next Page >

• Network speeds being report as 4x higher than actual in Windows 7 SP1

  - by Synetech

  Ever since installing Windows 7 SP1, I have noticed that all programs that display my network transfer rate have been exactly 4x higher than they actually are. For example, when I download something from a high-bandwidth web site or through torrents with lots of sources, the download rate indicated is is ~5MBps (~40Mbps) even though my Internet connection has a maximum of only 1.5MBps (12Mbps). It is the same situation with the upstream bandwidth: the connection maximum is 64KBps, but I’m seeing up to 256KBps. I have tried several different programs for monitoring bandwidth throughput and they all give the same results. I also tried different times and different days, and they always show the rate as being four times too high. My initial thought was that my ISP had increased the speeds (without my noticing), which they have done before. However, I checked my ISP’s site and they have not increased the speeds. Moreover, when I look at the speeds in the program actually doing the transfer (eg Chrome, µTorrent, etc.), the numbers are in line with the expected values at the same time that bandwidth monitoring programs are showing the high numbers. The only significant change (and pretty much the only change at all) that has occurred to my system since the change was the installation of SP1 for Windows 7. As such, it is my belief that some sort of change exists in SP1 whereby software that accesses the bandwidth via a specific API receives (erroneously?) high numbers while others that have access to the raw data continue to receive the correct values. I booted into Windows XP and downloaded some things via HTTP and torrent and in both cases, the numbers were as expected (like they were in Windows 7 before installing SP1). I then booted back into 7SP1 and once again, the numbers were four times higher than possible. Therefore it is definitely something in SP1 that has changed how local bandwidth is calculated/returned. There is definitely something wonky with Windows 7 SP1’s network speed calculation. I tried Googling this, but (for multiple reasons), have had a difficult time finding anything relevant. Has anybody else noticed this behavior? Does anybody know of any bugs or changes in SP1 that could account for it?

  Read the article

• Blocking IP addresses Load Balanced Cluster

  - by Dom

  Hi We're using HAproxy as a front end load balancer / proxy and are looking for solutions to block random IP addresses from jamming the cluster. Is anyone familiar with a conf for HAProxy that can block requests if they exceed a certain threshold from a single IP within a defined period of time. Or can anyone suggest a software solution which could be placed in front of HAProxy to handle this kind of blocking. Thanks Dom--

  Read the article

• Drupal 6 + Lighttpd = Very Slow on registering & no email

  - by Pepek Dan Baskom

  Hi, I have VPS account with 256MB RAM. But when Im trying registering, it takes very long time, and no email sent Is this because I have too small resource?

  Read the article

• Increase the number of concurrent users on Windows Server 2008

  - by gentlesea

  I have a Windows Server 2008 R2 running and I am able to connect to it using 2 different users via Remote Desktop Connection. Since a colleague and me are working on the server almost all the time and another colleague also wants to connect there is always the need to disconnect one user which is bad. Is there a possibility to increase the number of allowed users? On another server there are more than 2 users allowed. What is different there?

  Read the article

• Do 7.2k SATA drives and a hardware raid controller always end with trouble?

  - by xelco52

  I'm reading the FreeNAS userguide and came across the statement: Note that hardware RAID configured as JBOD may still detach disks that do not respond in time; and as such may require TLER/CCTL/ERC-enabled disks to prevent drive dropouts. I'm using a '3Ware 9550SX-8LP RAID Controller' and see quite a few stories of people successfully running raid5 on 7.2k consumer SATA drives without issue. Are detached disks only a theoretical problem, or should I expect this to be a common occurrence?

  Read the article

• What is the best apache/linux config for this server?

  - by jestro

  2 x Intel Xeon-Woodcrest 5130-DualCore 2GB RAM Ubuntu 10.04.0-64 In the worst case this box will be serving ~300 people requesting ~700 images at the same time. The images are around 5K each. I can upgrade or change the machine if anyone has any suggestions. Thanks!

  Read the article

• In Windows XP Professional, is there a limit on the number of files that can be contained in a single folder? [duplicate]

  - by Andrew

  This question already has an answer here: How many files can a windows folder contain? 1 answer I am running Windows XP Professional, service pack 3. Right now I have 4,398 files in a single folder, and Windows XP seems to read it fine. How many more files can I place in this same folder, either theoretically or practically? Thanks for your time.

  Read the article

• Losing connection to server from several computers

  - by user3696358

  I have a PostgreSQL server running Oracle Linux. In my network I have several workstations each running different OS (Fedora, Ubuntu, Windows). Every once in a while I lose connection from the several workstations to the server while other workstations can connect with no problem. If I do service network restart from the server the problem is solved and everyone can work until the next time it returns. Any clues? Thank you, Ben.

  Read the article

• Router behind Router--second router (and its clients) cannot be "seen" even after both routers are D

  - by Trioke

  Couple of terminology I guess I should get out of the way for consistency's sake throughout the post: External Router/Modem - SMC 8014WG - External IP 173.32.144.134 - Internal IP 192.168.0.1 Internal Router - LinkSys WRT120N - "External" IP of 192.168.0.175 - Internal IP 192.168.1.1 - Connected via Ethernet Cable (a really long one, from the basement to the second floor) PC - IP 192.168.200 - Connected Wirelessly via WAP2 Personal. Laptop - Used to try and diagnose the problem, a 4th machine to the setup which won't be part of the final setup once everything works. The actual problem: I've tried setting the LinkySys router as a DMZ'd client on the SMC router, and then DMZ'd the actual PC on the LinkSys. So the DMZ looks like this: On the SMZ, client with IP 192.168.0.175 is DMZ'd. On the LinkSys, client with IP 192.168.1.200 is DMZ'd. No dice. I then tried port forwarding the necessary port on the SMC to the LinkSys (lets just say, port 80). Then port forwarded Port 80 on the LinkSys to the PC. Same as the DMZ scenario above, but change DMZ with port forwarding. No dice, still :(. Now here's where I went stupid--and tell me if one should never do this--I enabled both DMZ and port forwarding at the same time. I fired up Opera--my browser of choice ;)--typed in 173.32.144.134:6333 and... ... Third time is the charm they say? Well, clearly not. Otherwise I wouldn't be here ;). To diagnose the problem, I enabled "Allow remote access to the Admin panel" on the LinkSys router, and specified port 6333 as the port to use. I port forwarded port 6333 on the SMC to 192.168.0.175, and access my external IP of 173.32.144.134:6333 in hopes of seeing the Admin panel... No dice (I think I've ran out of dice by now ;)). So to see where the problem was, I connected a laptop to the SMC via LAN cable, and typed in 192.168.0.175:6333, and viola, Admin Panel access! So the problem looks like it lies with the SMC--But that's as far as I've got, I've done the port forwarding, the DMZ'ing, and I've even disabled the built-in firewall for safe measures, but nothing worked. So, here I am. Unable to connect to the PC behind the Internal router externally, and without anything to go on other than to come here and ask for the wisdom of the the superuser folks :). If any more detail is required, just ask. (Apologies in advance, if questions should never be this long winded!)

  Read the article

• How do I remove any SELinux context or ACL?

  - by polemon

  HI, I have some files, that I'd like to remove the SELinux context or ACLs from (denoted by a '.' or a '+' respectively when using ls -alZ). I don't have too much time on my hands to read on the , etc on how to use chcon etc., so I just want to quickly know how to disable them all. Also, if someone knows a SELinux/ACL Cheat-Sheet, that would be terrific. Here's a screen shot: Notice the dots right after the permission symbols: drwxr-xr-x., etc.

  Read the article

• What is /com/host?

  - by grawity

  The Perl documentation for Sys::Hostname contains: Attempts several methods of getting the system hostname [...]. It tries the first available of [blah blah] , and the file /com/host. If all that fails it croaks. What systems is this /com/host used on? It's a very ungooglable filename, and this is the first time I have heard of it.

  Read the article

• Snow Leopard 10.6.3 Freezes Frequently

  - by Abhishek

  Snow Leopard 10.6.3 on my Macbook Pro freezes quite frequently now. It freezes for few seconds and then works fine. During that time trackpad does not work and keyboard works partially (missing keystrokes while I type). Initially it was once or twice in a day but now it has become quite frequent. Is somebody else facing similar issue?

  Read the article

• Python cannot go over internet network

  - by user1642826

  I am currently trying to work with python networking and I have reached a bit of a road block. I am not able to network with any computer but localhost, which is kind-of useless with what networking is concerned. I have tried on my local network, from one computer to another, and I have tried over the internet, both fail. The only time I can make it work is if (when running on the server's computer) it's ip is set as 'localhost' or '192.168.2.129' (computers ip). I have spent hours going over opening ports with my isp and have gotten nowhere, so I decided to try this forum. I have my windows firewall down and I have included some pictures of important screen shots. I have no idea what the problem is and this has spanned almost a year of calls to my isp. The computer, modem, and router have all been replaced in that time. Screen shots: import socket import threading import socketserver class ThreadedTCPRequestHandler(socketserver.BaseRequestHandler): def handle(self): data = self.request.recv(1024) cur_thread = threading.current_thread() response = "{}: {}".format(cur_thread.name, data) self.request.sendall(b'worked') class ThreadedTCPServer(socketserver.ThreadingMixIn, socketserver.TCPServer): pass def client(ip, port, message): sock = socket.socket(socket.AF_INET, socket.SOCK_STREAM) sock.connect((ip, port)) try: sock.sendall(message) response = sock.recv(1024) print("Received: {}".format(response)) finally: sock.close() if __name__ == "__main__": # Port 0 means to select an arbitrary unused port HOST, PORT = "192.168.2.129", 9000 server = ThreadedTCPServer((HOST, PORT), ThreadedTCPRequestHandler) ip, port = server.server_address # Start a thread with the server -- that thread will then start one # more thread for each request server_thread = threading.Thread(target=server.serve_forever) # Exit the server thread when the main thread terminates server_thread.daemon = True server_thread.start() print("Server loop running in thread:", server_thread.name) ip = '12.34.56.789' print(ip, port) client(ip, port, b'Hello World 1') client(ip, port, b'Hello World 2') client(ip, port, b'Hello World 3') server.shutdown() I do not know where the error is occurring. I get this error: Traceback (most recent call last): File "C:\Users\Dr.Frev\Desktop\serverTest.py", line 43, in <module> client(ip, port, b'Hello World 1') File "C:\Users\Dr.Frev\Desktop\serverTest.py", line 18, in client sock.connect((ip, port)) socket.error: [Errno 10061] No connection could be made because the target machine actively refused it Any help will be greatly appreciated. *if this isn't a proper forum for this, could someone direct me to a more appropriate one.

  Read the article

• Windows 7 x64 - Problem with 32-bit processes...

  - by Will A

  Hi All, Is it just me, or is Windows 7 x64 awfully unstable when it comes to 32-bit processes? If I ever find myself in a situation where a 32-bit process hangs or otherwise misbehaves, terminating the process (through e.g. task manager) seems to fail every time - there are no error messages or anything, it's just that the process refuses to terminate. Anyone else have the same problems running 32-bit applications on x64 Windows? Thanks, Will.

  Read the article

• Reviews Cheyney Group Marketing: What accounting softwares are available in the market for small businesses?

  - by user224313

  Accounting is the language of business, and good accounting software can save you hundreds of hours at the business equivalent of Berlitz. There's no substitute for an accounting pro who knows the ins and outs of tax law, but today's desktop packages can help you with everything from routine bookkeeping to payroll, taxes, and planning. Each package also produces files that you can hand off to an accountant as needed. Small-business managers have more accounting software options than ever, including subscription Web-based options that don't require their users to install or update software. Many businesses, however--including those that need to track large inventories or client databases, and those that prefer not to entrust their data to the cloud--may be happier with a desktop tool. We looked at three general-purpose, small-business accounting packages: Acclivity AccountEdgePro 2012 (both the product and the company were previously called MYOB), Intuit QuickBooks Premier 2012, and Sage's Sage 50 Complete 2013 (the successor to Peachtree Complete). All three packages offer a solid array of tools for tracking income and expenses, invoicing, managing payroll, and creating reports. These full-featured and highly mature programs don't come cheap. Acclivity AccountEdge Pro, at $299, is the least expensive; and prices climb if you opt to use common time-saving add-ons such as payroll services, or if you add licenses for multiple user accounts. All three are solid on the basics, but they have distinct differences in style and focus. The more you know about your accounting requirements, the more closely you'll want to look at the software you're thinking of buying. Sage 50 Complete should appeal most to people who understand the fine points of accounting and can use the product's many customization features (especially for businesses that manage inventory). QuickBooks works hard to appeal to newbies who need only the basics and might be intimidated by the level of detail and technical language exposed in the other two packages. At the same time, it also has a slew of third-party add-ons that meet specific needs and greatly expand its capabilities. AccountEdge Pro balances accessibility with a strong feature set at an affordable price. It's especially suitable for businesses that need to provide simultaneous access to multiple users.

  Read the article

• Move mailbox to public folder

  - by Kim Johansson

  I need some help moving a users mailbox to a public folder. I'm not really a sysadmin, I know some AD and Windows Server, but Exchange is new stuff to me. Basically, one user has left the company, so we disabled his account in the AD, but now it's time for the mail. I need to move his old mail to a mailbox which the owern of the company and I can acess, then I would like to forward any new emails to that public folde How can I do this with Exchange 2007?

  Read the article

• Where can I find a list of the videos I liked on youtube? [closed]

  - by Erik Vold

  I was watching a video on youtube, then I hit ctrl-w on the wrong window by mistake, and now I'm having a a hard time finding the video again. I hit the 'like' button so is there a list of the videos that I like anywhere?

  Read the article

• Printing data in Excel ver 14.0 in a maxed cell

  - by Zppy

  I have set the cell to the maximum size (column width of 255 and row height of 409.5). In order to view all of the data in the cell, I have to use up/down arrows. I don't need to necessarily view all of the data in the cell at one time, however I do need it to print, and it's only printing what's viewable (not what you can scroll through).....any suggestions on how to get the entire cell to print? Thanks!

  Read the article

• Cannot play sound: device being used by another application

  - by Ecom Evolution

  I tried to change my speaker setup and every time I click "test" I get this error message on Windows 7 SP1. I tried running "sndvol" to view the applications list but the list is empty. Since I tried to test the new speaker setup, I'm now left without sound for all applications and can't get sound even if I switch back. I have not updated my sound drivers so I don't know what could have changed. What could be causing this?

  Read the article

• How to create issue dependencies/links in Jira (3.13) ?

  - by zarko.susnjar

  Hi, We recently switched from other bug tracking software to Jira (3.13 currently ). We need to set issue linking in a manner that my task start time depends on other colleague's issue and I can not start until he resolves his issue... I goolged and found that this kind of thing is integrated in newer versions :/ Maybe we need some plugin, make some custom field, enable something in administration part... Any help would be appreciated... (please retag/add jira and bug-tracking tags or whatever)

  Read the article

• Retrieve MS SQL database or table structure in XML

  - by clutch

  Is there a way to export the database schema in well formed XML of a MS 2000 SQL Server. I'm looking for just the structure not the data and the more detailed the better. The XML may be used in a migration processes. I'm more familiar with MySQL then with SQL Server so please be detailed if you have time. Thanks

  Read the article

• On ubuntu 10.04, what is the recommended RoR stack?

  - by Kurucu

  I can't find clear answers / methods on this. As seen elsewhere, passenger and RoR under apache gobble up ram on my VPS. I've tried a multitude of stacks and implementations, currently resting on a sub optimal apache/cgi/rails configuration, which has swapped my ram usage for CPU time and slow response to requests. Can anyone recommend an efficient and preferably simple to administer method of setting up rails apps in ubuntu 10.04 server?

  Read the article

• How to format pendrive from fat32 to ext3 in windows7

  - by newb

  I am trying to make a live usb of OPHCRACK and tried to boot from FAT32 pendrive. But after making live usb and boot from it the ophcrack didnt work. After searching a while i came to understand that ophcrack will not work in a fat32 pendrive and we have to convert it into ext3. But i am getting hard time finding a method or software which can be used to convert fat32 pendrive to ext3 in windows 7. Can you suggest any method or software's for this purpose

  Read the article

• Eject LiveCD + Reboot

  - by JPerkSter

  We use LiveCD's alot in my line of work. Whether it be fscking file systems, recovering data from a customer to rm'd his server, etc. I'm looking for a quick way to eject the CDROM and reboot the server. Does anyone have any one-liners to do this or any other suggestions? Using 'eject' doesn't work most of the time, from what I've tested / used. We're using RHEL / Cent on most of our servers if that helps :D

  Read the article

• Single line command to archive a certain amount of folders

  - by EarthMind

  I'm looking for a single line command that archives 5 folders into .tar files (no gzip/bzip needed) in a certain directory and deletes the folders after a successful compression. It has to use the original folder name as file name for the archive too. So far I've used the current command, which only does one directory per time: tar -c directory > directory.tar && rm -rf directory Thanks in advance.

  Read the article

< Previous Page | 1274 1275 1276 1277 1278 1279 1280 1281 1282 1283 1284 1285  | Next Page >