Search Results

Search found 4786 results on 192 pages for 'traffic shaping'.

Page 129/192 | < Previous Page | 125 126 127 128 129 130 131 132 133 134 135 136  | Next Page >

• What's a good anti-virus besides Kaspersky and Nod32?

  - by KeyStroke

  Hi there, I've been using Nod32 for a few years until it started conflicting with the new version of my backup software, which is essential for me. So then I tried Kaspersky, and it's good but it forces all internet traffic to go through it (as I can see through NetLimiter), which keeps breaking my downloads and giving me timeouts. So my question is: is there a good anti-virus i could use beside these two? I need it to be light and efficient. I'm not looking for free ones btw. Appreciate your input.

  Read the article

• Can a Linksys Router be the cause of bad speeds on a 1.5 mbps link.

  - by gramware

  We use a Linksys 5-port router at a smal organization with about 20 employees. We recently acquired a 1.5 mbps fibre link, but sometimes the link goes down and speeds are still low. On enquirey from the ISP, this was part of the response, However there maybe throttling due to the router in place. A Linksys is a low end router and may be unable to carried traffic of up to 1536Kbps. We are in a position to deploy a Cisco 871 router on test for 2 wks to eliminate that possibility. Also kindly advise the destination of the ping results they look to high. How true is that about the router throttling the network and need for a bigger one.

  Read the article

• Do I need a ssl certificate if just pointing my domain to Cloudfront?

  - by hashpipe

  I have a website running on a domain (e.g site.com). I have an additional domain(e.g sitecdn.com) which basically points to Amazon Cloudfront for delivery. Amazon Cloudfront in turn basically fetches the data from the main domain (site.com). I use this setup primarily to have multiple subdomains of my sitecdn.com to point to assets via the cdn. The main website has a ssl certificate, and I intend to put all assets served from the cdn as https links only. Something like <img src="https://img.sitecdn.com/image.jpg" /> I'm a little confused whether I need a ssl for my cdn domain. In cloudfront I can set the setting to allow both https and http traffic. Do I need a ssl certificate for this ? If yes, then where do I install the ssl certificate, since I don't have a server for sitecdn.com.

  Read the article

• Interpreting Munin graphs showing available entropy and MySQL slow queries in sync

  - by user64204

  We're experiencing performance issues on our website, and after reviewing our munin graphs, the only metrics we've found in sync are Available entropy and MySQL slow queries, with the latter influenced by our number of logged in users: Based on the wikipedia entropy page, my understanding is that entropy is the amount of randomness (here measured in bytes) that the system can use for various tasks, mainly cryptography and functions that require random input. Since the peaks in available entropy and MySQL slow queries are occurring in sync and at regular interval, that the number of MySQL slow queries is proportional to our number of Drupal users whereas the peaks in available entropy seem to be much more constant and less proportional to these 2 metrics, we're thinking available entropy is the reflect of a root cause which, combined with the traffic to our website, is causing those slow queries (and not the opposite, slow queries influencing the entropy). Accordingly: Q: What underlying problem do you think could cause regular peaks in available entropy that could have an influence on MySQL's ability to process queries?

  Read the article

• Nginx Forward SSL for single site

  - by Will.brown

  I have a nginx server setup and it works fine for http however i would like to bypass the proxy for https connection. I want it so that when someone goes to my ip https:// ip1 (Nginx server) it bypasses ngix and forwards all traffic to https:// ip2(webserver) i do not need ngix to do this for any ssl website just one particular website. SO Client to https:// ip1 to https:/ /ip2 to https:// ip1 to client pc I just want the nginx to not intercept the connection and forward it on and on return forward the connection to client Im guessing i do this by nat mascarade buy not exactly sure how to do it and if i will need to tell nginx to ignore ssl aswell can someone help me please this has gone me stuck

  Read the article

• How to know currently open ports on the Windows Firewall?

  - by QIU Quan

  On Windows XP and Windows Server 2003, I can know currently open ports on the Windows Firewall using the following command: netsh firewall show state However, on Windows 7 and Hyper-V Server 2008 R2, when I give that command, it says: No ports are currently open on all network interfaces. IMPORTANT: Command executed successfully. However, "netsh firewall" is deprecated; use "netsh advfirewall firewall" instead. Apparently there are ports open because services such as NetBIOS NS, Remote Desktop, and Hyper-V remote administration are functioning. I tried a few 'netsh advfirewall' show commands, but didn't get a way to find out which ports are permit by Windows Firewall. Knowing the currently open ports, I can be sure that I'm permitting necessary and sufficient traffic to pass in, no more, no less. Going through the whole set of advanced firewall rules is so tedious and error-prone. Is there a command on Windows 7 and Windows Server 2008 to do this efficiently?

  Read the article

• Time between AWS Notifying of Scale Down and Terminating instance

  - by SteveEdson

  Here is the scenario, there are multiple EC2 instances behind a load balancer. When traffic dies down, the SCALE_DOWN policy is triggered from a CloudWatch alarm. What I would like, is for the instance that is going to be terminated, or a separate server altogether, to be able to run a quick script that will execute a few commands to ensure all data has been transferred. My initial question was going to be how can I send a notification when an instance is going to be terminated by an auto scale, SCALE_DOWN policy. But then I saw this question Amazon EC2 notifying the instance when the autoscale service terminates it. If the notification is sent, how much time is there before the instance actually gets terminated? Are there any parameters to specify this time? Would it be a better idea to notify an instance that it is no longer needed, and get the instance to terminate itself once it has finished running the final script? Or, am I making this into a bigger problem than it actually is, and theres a far simpler solution?

  Read the article

• Kaspersky AV is slowing down my connection significantly

  - by KeyStroke

  Hi, I'm using Kaspersky AV 2010, and I've noticed recently in Firefox (DownThemAll download manager) that my download speed has been significantly reduced after installing Kaspersky (from 450 kb/s to 30 kb/s!!). I can solve the issue temporarily by pausing protection and then resuming it again. But it's getting frustrating since I have to do this every few hours. Also another issue I have with the AV (which could be related) is that it forces all network traffic to go through it! (Nod32 didnt do that). Any idea what could be causing this? Your help is much appreciated

  Read the article

• How to set up wireless access on a Cisco router

  - by Carlos

  Hi, I've set up my 877W according to the configuration listed in this forum post: IPTV over Cisco 877 (It's the working configuration at the bottom of the post) Note that I have an 877W, so it also has a wireless radio. Now, I've gotten the whole setup to work, so IPTV is working, and I can access the internet via the ethernet ports. Now I'm trying to figure out how to allow access via the dot11radio interface. I've gathered that I basically need to create a bridge group, and bridge the radio to the internet VLAN. However, when I add a bridge-group 2 command to VLAN1, it seems to take down the whole internet VLAN. (The IPTV continues to work.) This makes the router itself inaccessible (I've got a laptop, so no serial) and I end up having to reboot the router. Can anyone tell me how to a) Allow wireless access to the internet (preferably with WEP, to match my old router) b) Determine what makes the router inaccessible when I add the new bridge group c) Forward the IPTV traffic onto a machine on my internet VLAN

  Read the article

• OLTP Sql Server RAID configuration with 10 disks, allocation Unit and disk stripe size

  - by Chris Wood

  On a new db server I only have 10 disks to play with, The usage is about a booking every 3-5 seconds, so not high volume, I know compromises have to be made, but my initial thoughts are - DISK 1 & 2 - RAID 1 - OS DISKS 3,4,5,6 - RAID 10 - Data, Indexes & TempDB DISKS 7,8,9,10 - RAID 10 - Logs & Backup Full backups will take place when there is virtually no traffic on the website so not bothered about the contention with the logs. disk 3-10 - 8kb NTFS unit allocation size disk 3-10 - 64kb Disk Stripe size does this seems to be sensible, any other considerations I have omitted ? thanks

  Read the article

• Windows 2008 Routing and Remote access server - access to the internet

  - by Ian

  I have a windows 2008 r2 remote access server set up and running. The remote access works fine. My problem is that the remote access server itself doesn't have access to the internet. The box has two interfaces, an internal and an external. Inbound connections come in on the external interface and RRAS responds. All wall and nice. I want to be able to use windows update, browse, etc from this box but can't as the outbound traffic just gets blocked. I've tried going into the RRAS mmc tool and opening the interface properties, under which there are two buttons for inbound and outbound filters. There I tried adding ports 80 and 443, but this doesn't work completely. I can see the connection initiating (Syn goes out) but the session never establishes itself. Anyone done this or got any suggestions?

  Read the article

• If ssh connection fails using SOCKS then what? Automate switch to no proxy?

  - by Benjamin Jones

  Right now I am using plink in a batch routine that reconnects to my SSH server if I loose connection. I use my plink connection & socks proxy (firefox) to forward all my browser traffic. Works great EXCEPT for one thing! If I can't get to my ssh server for some ODD reason I have to go to options in firefox and revert back my settings to NO Proxy. It can be done, but its annoying! So how would I keep my SOCKS Proxy connection in firefox, but if I cant connect to my SSH Server, how can I automatically switch to the autodetect proxy/no proxy settings in firefox? I would think that I could use the Firefox command line arguments and a batch routine to do so, but I do not believe this is possible. I do see via this link where the proxy settings are stored, but does that mean I have to change the proxy settings depending on my senario above within the .js file? http://stackoverflow.com/questions/843340/firefox-proxy-settings-via-command-line

  Read the article

• How to set up a wireless AP with a linux box and SOCKS proxy

  - by user50455

  I've got: (1) Linux box (Arch linux to be precise, but that doesn't really matter) (2) Ethernet connection on it (say, eth0) (3) Socks proxy on a remote site (say, remote :port), which can be accessed through (2) (4) Wireless card on local linux box (say, eth1) So, the task is: create a wireless access point using (4) on local site (1) in such a way that all connections from it will go through proxy (3). E.g., when one simply connects to that AP (well, there should be DHCP or something for that) and goes to serverfault.com, all the traffic goes through that SOCKS proxy. I'm just asking for the digging direction and some references, not step-by-step tutorial. Thanks in advance

  Read the article

• IP Tunneling for Spotify? [closed]

  - by everwicked

  I was in the UK and enjoyed Spotify relentlessly. Now I've moved back to Greece and I can't even pay for the darn thing. So my idea was this- I have a server in France and it has a fail-over IP in the UK. So I installed a proxy server on it and made it listen to the UK IP. So far so good. Then, I played Spotify for a while through the proxy server just fine, and it thought I was in the UK. But now... it gives me an error message that I'm in another country than the one on my profile (UK). I don't really understand why - maybe they also geolocate the IP address of the client, not just the proxy server? Either way, I'm kinda stuck - is there a way to tunnel Spotify's network traffic through my server transparently? Maybe a VPN or something similar? Thanks

  Read the article

• Error while setting up Anywhere Access on Windows Server 2012 Essential (personalized domain name from Microsoft)

  - by Thomas

  I am trying to setup Anywhere Access on a Windows Server 2012 Essential Release Candidate, but keep getting this error: "The domain name was not setup for your server. Wait a few minutes and run the wizard again. An unknown error occurred. Please wait a few minutes and then try again". These are the options that I selected in the Wizard: I want to set up a new domain name Get a personalized domain name from Microsoft Entered my Windows live id and password xxxx.remotewebaccess.com And on the next page the error is displayed. I have setup my router (Linksys WRT160N) to forward all TCP traffic to the Server. UPnP is also enabled. If I hit my public (dynamic) IP (http://188.182.194.182/) I get the Windows Server 2012 homepage. Any ideas?

  Read the article

• 10 gigabit or 1 gigabit switch

  - by Guntis

  We are planning to move mysql to dedicated box. At this moment we have web servers and mysql is running on each. Question is: cheaper is to buy 10G switch and put 10G network card into mysql server. Or buy normal gigabit switch and connect mysql box to switch with multiple network cables. In 1G scenario then we give each web server different mysql IP address. I don't think, that mysql box with one 1G link is enough to to satisfy multiple web box mysql traffic. At this moment we have 3 servers witch are running mysql/web. Plan is to add fourth server for mysql only. Thanks. Edit: if we buy 1G switch with mini-GBIC ports. Can we put in mini-GBIC 10G connectors and then connect mysql box to that port?

  Read the article

• Does anyone provide a Skype connection service?

  - by Runc

  Is there a way of offering Skype access to incoming calls while keeping all telephony traffic over our chosen business telephony provision? Is there a 3rd party who can route incoming Skype calls to our telephone system? The business has had requests from contacts wanting to call us via Skype, but we want to keep all telephony via our PBX and phone lines as our geographic location limits our available internet bandwidth. We also prevent installation of non-standard applications on desktops and do not want to add Skype to our build. I was wondering if there were any 3rd parties that provide a connection service that would allow our contacts to call via Skype and us receive the calls via our phone system.

  Read the article

• Latency, Ping and Other Questions

  - by Paulo Cassiano

  In a high traffic application, like an online auction system, few ms could determine 'to win or 'to lose' the 'battle'. I'm from Brazil. Here, I 'ping' local sites - like UOL - and receive replies in ~ 11ms. When I 'ping' US sites - like RackSpace - I receive replies in ~ 130 ms! The point is: I need a (very good like RackSpace [1]) infra-structure to host my killer online auction application, but there's no (RackSpace like) options in Brazil... Assuming that all users are located here, in Brazil, is it 'sine qua non' condition to host my application here, in Brazil? I think ~130 ms is a very high latency but, all users will receive this reply, sure? Well, where should I host my application? [1] Feel free to point me to any other very good host option other than RackSpace. I've cited it because I only know these guys...

  Read the article

• Static Route Qestion

  - by mrlayance

  I have a Wan simulator between 2 networks. I can ping both networks from the wan simulator, but I can not ping from one network to the other. testr01 Fa0/0 10.0.0.1/24 FA0/1 192.168.0.1/30 | | Wan Sim 2 nics Eth0 192.168.0.2/30 | Eth1 192.168.1.2/30 | | testr02 Fa0/1 192.168.1.1/30 Fa0/0 10.1.0.2/24 I can not figure out what type of routes I need. On the route? On the Server? I guess all 10. traffic to the Fa0/0 ports? Thanks

  Read the article

• Book recommendation for learning server management and Apache

  - by japancheese

  Hello, I'm currently managing a site that I feel could be optimized and utilized to be much faster, however, I'm having difficulty finding reliable information to do it. I find the Apache documentation to be a hard read, and too technical about things I don't have a strong grasp on. I'm just looking for a good beginner/intermediate book about server administration to learn as much as possible about Apache, as well as how to create a nice secure, robust server that doesn't crash at the first hint of unusual traffic surges. Thanks to anyone who can point me in the right direction.

  Read the article

• Share internet with my phone?

  - by Kenneth Cochran

  Most people want to use their cellphone as a modem for their computer, commonly referred to as 'tethering'. I'm actually interested in doing the opposite: Sharing my landline internet connection(which is much faster than any 3G service) with by cellphone. My phone is a Verizon BlackBerry Curve 8330 and it has USB and bluetooth connections. I know both USB and Bluetooth are capable of supporting tcp/ip traffic what's not so clear is: Is IP over USB or Bluetooth standardized? Is it supported on my phone? Has my cellphone company crippled my phone to prevent me from using it?

  Read the article

• In TCP/IP terms, how does a download speed limiter in an office work?

  - by TessellatingHeckler

  Assume an office of people, they want to limit HTTP downloads to a max of 40% bandwidth of their internet connection speed so that it doesn't block other traffic. We say "it's not supported in your firewall", and they say the inevitable line "we used to be able to do it with our Netgear/DLink/DrayTek". Thinking about it, a download is like this: HTTP GET request Server sends file data as TCP packets Client acknowledges receipt of TCP packets Repeat until download finished. The speed is determined by how fast the server sends data to you, and how fast you acknowledge it. So, to limit download speed, you have two choices: 1) Instruct the server to send data to you more slowly - and I don't think there's any protocol feature to request that in TCP or HTTP. 2) Acknowledge packets more slowly by limiting your upload speed, and also ruin your upload speed. How do devices do this limiting? Is there a standard way?

  Read the article

• Windows Firewall failing after 9-12 hours?

  - by routeNpingme

  I have 2 VM servers in the exact same NIC configuration: Server 2003 R2, one NIC connected to private (hardware firewall) network in a 10.x private address space, and one NIC connected straight to public internet. Windows Firewall is enabled for the Public Internet NIC only. Now, what doesn't make sense - this fails generally after 9-12 hours. It's not exact, but once or twice a day, traffic will just stop on the Internet NIC. No event log entries when it happens, and restarting the Windows Firewall service as well as stopping or restarting IPSec Services (just for fun) has no effect. Once the server is rebooted, everything is fine again for another 1/2 day. Any suggestions?

  Read the article

• Server freeze - how to debug

  - by Petr Peller

  I am running a Debian virtual server with Apache, PHP, MySQL. There is just 1 website with very low traffic running but the server very often (almost everyday) freezes and does not respond. When this happens the server is unreachable from web browser or by SSH and I have to go to administration of my provider and perform server hard reset after this the server seems to work fine. How can I find out what is causing the freezes? Linux vm2797 2.6.32-5-amd64 #1 SMP Tue Jun 14 09:42:28 UTC 2011 x86_64 GNU/Linux

  Read the article

• Monitoring ASA packet loss via SNMP

  - by dunxd

  I want to monitor packet loss on my ASA 5505 VPN endpoints using SNMP. This is so I can graph the rates in Cacti and/or get alerts in Nagios. However, I am not sure what SNMP values I should use to measure packet loss. In the ASA I can run sh interface Internet stats to show traffic statistics for the interface connected to the Internet. This shows 1 minute and 5 minute drop rates. Are these measures an indicator of packet loss? Are there SNMP values I can access that correspond to those values? Should I be looking at different values? Is the ASA even able to measure packet loss?

  Read the article

< Previous Page | 125 126 127 128 129 130 131 132 133 134 135 136  | Next Page >