Search Results

Search found 5444 results on 218 pages for 'svn verify'.

Page 130/218 | < Previous Page | 126 127 128 129 130 131 132 133 134 135 136 137  | Next Page >

• How do you test if a PCI slot is working - motherboard diagnostic software?

  - by Adam

  I suspect that my motherboard is bad, and that my PCI-E slot is not working. I have a Gigabyte motherboard that had a Hauppage 2250 working fine in the PCI-E slot for many months. However - recently - would not get TV channels that I used to get --- until finally Media center cant detect any channels at all. Got a new tuner card (ATI 350 card) - cant detect any channels. The cable signal is good - I have it connected directly to a TV - all channels come in clear. SO that is why I suspect a motherboard problem. Are there any motherboard diagnostic scanner utilities that can verify I need a new motherboard

  Read the article

• Check username password combination in Windows

  - by mwolfe02

  I have an autohotkey script that maps multiple network drives using a series of net use commands. I enter my password once into an autohotkey inputbox, then run all of the net use commands with the entered password. This works great as long as I enter the correct password. If I mistype my password it runs all the net use commands with an incorrect password and my account ends up locked out. Aside from catching the error code/output from the net use command, is there some other way (through Autohotkey/Windows command-line) to verify the username/password combo is correct before I run it multiple times?

  Read the article

• Localhost working fine with executing php code except mail function.

  - by Radheshyam Nayak

  i tried executing the mail() and got the following error "Warning: mail() [function.mail]: Failed to connect to mailserver at "localhost" port 25, verify your "SMTP" and "smtp_port" setting in php.ini or use ini_set() " but SMTP and smtp_port are both set in php.ini more ever other codes are working fine with localhost. disabled or/and added exception to firewell no result.... tried telnet localhost 25 error:could not connect to localhost port 25:connection failed..... Thunderbird my mail client says:could not connect to server localhost the connection was refused.... php.ini [mail function] ; For Win32 only. ; http://php.net/smtp SMTP = localhost smtp_port = 25 running mercury mail server in xampp... previously working fine but now not working..

  Read the article

• Swapping 3Ware Raid Card - Best Procedure

  - by Brian Lee Jackson

  We have a server running an old firmware version and driver (just took this position) on the 3Ware 9650SE Raid Controller... We have been having issues with the server and seemed to have narrowed it down to the Raid Card... I will be replacing the Raid card with the same model of 3Ware 9650SE, however, the card ordered most likely will have newer firmware on it. I managed to backup all the data to a very large drive. My plan is to update the firmware/driver on the current setup (which is still booting) and verify that everything works.. Then throw in the new Raid Card, check the firmware version (not letting it post). And update to newest firmware if needed via Java management utility on the card? Is this the best route? Thanks!

  Read the article

• How can you enable SMB2.0 on a router running DD-WRT?

  - by jeffreypriebe

  I think the steps are something like: Install DD-WRT on a router with an external hard-drive Install Optware to get Samba Upgrade to Samba 3.6 (the link shows Samba 3.5, but using the NSLU2 optware packages, you can get 3.6 with built-in SMB2.0) ...then a miracle occurs... Then you can use SMB2.0 to connect to your share What is step 4? I can't find it on forums, etc. Am using Microsoft Network monitor to check for SMB2.0 connection, I'm on Windows 7 and have tried network connections on wireless and gigabit wired to the router. No joy. I doubt it matters, but to get ahead of the questions: DD-WRT v24-sp2 (10/26/10) big (SVN revision 15508M NEWD-2 K2.6 Eko) on Cisco/Linksys E3000

  Read the article

• Unknown protocol when trying to connect to remote host with stunnel

  - by RaYell

  I'm trying to set up a stunnel for WebDav on Windows. I want to connect 80 port on my local interface to 443 on another machine in my network. I can ping the machine remote machine. However when I use the tunnel, I'm getting this error all the time SSL state (accept): before/accept initialization SSL_accept: 140760FC: error:140760FC:SSL routines:SSL23_GET_CLIENT_HELLO:unknown protocol There is nothing in the logs on the other machine and here's my stunnel connection config [https] accept = 127.0.0.2:80 connect = 10.0.0.60:443 verify = 0 I've set it up to accept all certificates so this shouldn't be a problem with a self-signed certificate remote host uses. Does anyone knows what might be the problem that this connection cannot be eastablished?

  Read the article

• OpenVPN stopped working, what could have happened?

  - by jaja

  I have Openvpn, and it worked great when I used it on PC (Windows 8), then I copied all files (Certificates and config) to an Android 4 phone to use them. Now, Openvpn works on the phone, but not the PC. Specifically, when I open Google I get: The server at www.google.com can't be found, because the DNS lookup failed, but the VPN seems to be connected. I have a simple question, could the problem be because I copied the same files? Routing table before connecting:- IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 192.168.1.254 192.168.1.101 25 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 192.168.1.0 255.255.255.0 On-link 192.168.1.101 281 192.168.1.101 255.255.255.255 On-link 192.168.1.101 281 192.168.1.255 255.255.255.255 On-link 192.168.1.101 281 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 192.168.1.101 281 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 192.168.1.101 281 =========================================================================== Routing table after connecting:- IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 192.168.1.254 192.168.1.101 25 0.0.0.0 128.0.0.0 10.8.0.5 10.8.0.6 30 10.8.0.1 255.255.255.255 10.8.0.5 10.8.0.6 30 10.8.0.4 255.255.255.252 On-link 10.8.0.6 286 10.8.0.6 255.255.255.255 On-link 10.8.0.6 286 10.8.0.7 255.255.255.255 On-link 10.8.0.6 286 **.**.***.** 255.255.255.255 192.168.1.254 192.168.1.101 25 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 128.0.0.0 128.0.0.0 10.8.0.5 10.8.0.6 30 192.168.1.0 255.255.255.0 On-link 192.168.1.101 281 192.168.1.101 255.255.255.255 On-link 192.168.1.101 281 192.168.1.255 255.255.255.255 On-link 192.168.1.101 281 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 192.168.1.101 281 224.0.0.0 240.0.0.0 On-link 10.8.0.6 286 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 192.168.1.101 281 255.255.255.255 255.255.255.255 On-link 10.8.0.6 286 =========================================================================== Server conf:- port 1194 proto udp dev tun ca ca.crt cert myservername.crt key myservername.key dh dh1024.pem server 10.8.0.0 255.255.255.0 ifconfig-pool-persist ipp.txt duplicate-cn keepalive 10 120 comp-lzo persist-key persist-tun status openvpn-status.log verb 3 push "redirect-gateway def1" Client conf:- client dev tun proto udp remote 89.32.148.35 1194 resolv-retry infinite nobind persist-key persist-tun mute-replay-warnings ca ca.crt cert client1.crt key client1.key verb 3 comp-lzo redirect-gateway def1 Here is the log file:- Tue Dec 18 16:34:27 2012 OpenVPN 2.2.2 Win32-MSVC++ [SSL] [LZO2] [PKCS11] built on Dec 15 2011 Tue Dec 18 16:34:27 2012 WARNING: No server certificate verification method has been enabled. See http://openvpn.net/howto.html#mitm for more info. Tue Dec 18 16:34:27 2012 NOTE: OpenVPN 2.1 requires '--script-security 2' or higher to call user-defined scripts or executables Tue Dec 18 16:34:27 2012 LZO compression initialized Tue Dec 18 16:34:27 2012 Control Channel MTU parms [ L:1542 D:138 EF:38 EB:0 ET:0 EL:0 ] Tue Dec 18 16:34:27 2012 Socket Buffers: R=[65536-65536] S=[65536-65536] Tue Dec 18 16:34:27 2012 Data Channel MTU parms [ L:1542 D:1450 EF:42 EB:135 ET:0 EL:0 AF:3/1 ] Tue Dec 18 16:34:27 2012 Local Options hash (VER=V4): '41690919' Tue Dec 18 16:34:27 2012 Expected Remote Options hash (VER=V4): '530fdded' Tue Dec 18 16:34:27 2012 UDPv4 link local: [undef] Tue Dec 18 16:34:27 2012 UDPv4 link remote: ..*.:1194 Tue Dec 18 16:34:27 2012 TLS: Initial packet from ..*.:1194, sid=4d1496ad 2079a5fa Tue Dec 18 16:34:28 2012 VERIFY OK: depth=1, /C=/ST=/L=/O=/OU=/CN=/name=/emailAddress= Tue Dec 18 16:34:28 2012 VERIFY OK: depth=0, /C=/ST=/L=/O=/OU=/CN=/name=/emailAddress= Tue Dec 18 16:34:29 2012 Data Channel Encrypt: Cipher 'BF-CBC' initialized with 128 bit key Tue Dec 18 16:34:29 2012 Data Channel Encrypt: Using 160 bit message hash 'SHA1' for HMAC authentication Tue Dec 18 16:34:29 2012 Data Channel Decrypt: Cipher 'BF-CBC' initialized with 128 bit key Tue Dec 18 16:34:29 2012 Data Channel Decrypt: Using 160 bit message hash 'SHA1' for HMAC authentication Tue Dec 18 16:34:29 2012 Control Channel: TLSv1, cipher TLSv1/SSLv3 DHE-RSA-AES256-SHA, 1024 bit RSA Tue Dec 18 16:34:29 2012 [myservername] Peer Connection Initiated with ..*.:1194 Tue Dec 18 16:34:32 2012 SENT CONTROL [myservername]: 'PUSH_REQUEST' (status=1) Tue Dec 18 16:34:32 2012 PUSH: Received control message: 'PUSH_REPLY,redirect-gateway def1,route 10.8.0.1,topology net30,ping 10,ping-restart 120,ifconfig 10.8.0.6 10.8.0.5' Tue Dec 18 16:34:32 2012 OPTIONS IMPORT: timers and/or timeouts modified Tue Dec 18 16:34:32 2012 OPTIONS IMPORT: --ifconfig/up options modified Tue Dec 18 16:34:32 2012 OPTIONS IMPORT: route options modified Tue Dec 18 16:34:32 2012 ROUTE default_gateway=192.168.1.254 Tue Dec 18 16:34:32 2012 TAP-WIN32 device [Local Area Connection] opened: \.\Global{F0CFEBBF-9B1B-4CFB-8A82-027330974C30}.tap Tue Dec 18 16:34:32 2012 TAP-Win32 Driver Version 9.9 Tue Dec 18 16:34:32 2012 TAP-Win32 MTU=1500 Tue Dec 18 16:34:32 2012 Notified TAP-Win32 driver to set a DHCP IP/netmask of 10.8.0.6/255.255.255.252 on interface {F0CFEBBF-9B1B-4CFB-8A82-027330974C30} [DHCP-serv: 10.8.0.5, lease-time: 31536000] Tue Dec 18 16:34:32 2012 Successful ARP Flush on interface [26] {F0CFEBBF-9B1B-4CFB-8A82-027330974C30} Tue Dec 18 16:34:37 2012 TEST ROUTES: 2/2 succeeded len=1 ret=1 a=0 u/d=up Tue Dec 18 16:34:37 2012 C:\WINDOWS\system32\route.exe ADD ..*. MASK 255.255.255.255 192.168.1.254 Tue Dec 18 16:34:37 2012 ROUTE: CreateIpForwardEntry succeeded with dwForwardMetric1=25 and dwForwardType=4 Tue Dec 18 16:34:37 2012 Route addition via IPAPI succeeded [adaptive] Tue Dec 18 16:34:37 2012 C:\WINDOWS\system32\route.exe ADD 0.0.0.0 MASK 128.0.0.0 10.8.0.5 Tue Dec 18 16:34:37 2012 ROUTE: CreateIpForwardEntry succeeded with dwForwardMetric1=30 and dwForwardType=4 Tue Dec 18 16:34:37 2012 Route addition via IPAPI succeeded [adaptive] Tue Dec 18 16:34:37 2012 C:\WINDOWS\system32\route.exe ADD 128.0.0.0 MASK 128.0.0.0 10.8.0.5 Tue Dec 18 16:34:37 2012 ROUTE: CreateIpForwardEntry succeeded with dwForwardMetric1=30 and dwForwardType=4 Tue Dec 18 16:34:37 2012 Route addition via IPAPI succeeded [adaptive] Tue Dec 18 16:34:37 2012 C:\WINDOWS\system32\route.exe ADD 10.8.0.1 MASK 255.255.255.255 10.8.0.5 Tue Dec 18 16:34:37 2012 ROUTE: CreateIpForwardEntry succeeded with dwForwardMetric1=30 and dwForwardType=4 Tue Dec 18 16:34:37 2012 Route addition via IPAPI succeeded [adaptive] Tue Dec 18 16:34:37 2012 Initialization Sequence Completed

  Read the article

• Debian Server Daemon: File sync

  - by Gehk

  Hello, I'm looking for a way to (auto) sync files on some pcs over the internet and save/backup them on my server. Just like Dropbox and other services like that. I found iFolder (by Novell), but it's not made for debian (i think it would still compile). I don't know if it's made for an webserver or just home server. Another way would be FTP, I don't know clients (i use ubuntu and windows on my pcs), which autoupload new/edited files. There is also svn/csv, but they are quite slow (afaik), and I don't know if there are suited for this. Someone got an idea? Thanks.

  Read the article

• Install remote desktop session host remotely

  - by Jorge

  I've removed the remote desktop host role from one of my Azue VM, so I can't RDP into it. I have tried to recreate the endpoints and even the VM with no luck. I can't either access remotely with Server Manager; getting this error: The client cannot connect to the destination specified in the request. Verify that the services on the destination is running" I cannot connect remotely to the registry Make sure this computer is on the network, has remote administration enabled, and that both computers are running the remote registry service PsPing tells me The remote computer refuses the network connection Which workaround can I follow to solve this?

  Read the article

• Sudo yum seems to fail on CentOS, but works fine after sudo -i

  - by Aron Rotteveel

  I am currently having some trouble with yum through sudo. For some reason, it does not seem to work: aron@graviton [/var/log]# sudo yum clean all There was a problem importing one of the Python modules required to run yum. The error leading to this problem was: /usr/lib64/python2.4/lib-dynload/datetime.so: failed to map segment from shared object: Cannot allocate memory Please install a package which provides this module, or verify that the module is installed correctly. It's possible that the above module doesn't match the current version of Python, which is: 2.4.3 (#1, Sep 3 2009, 15:37:37) [GCC 4.1.2 20080704 (Red Hat 4.1.2-46)] If you cannot solve this problem yourself, please go to the yum faq at: http://wiki.linux.duke.edu/YumFaq The strange thing, however, is that it works fine when I gain root privileges through sudo -i first. Any ideas what might be causing this problem?

  Read the article

• Amazon SES domain verification TXT DNS record

  - by Skittles

  I currently am trying to get my domain verified on Amazon's SES and running int a problem that google searches are not helping me get any closer to solving. According to SES, I have to create a TXT record in my DNS for the domain I'm trying to verify. Amazon gives you the following (value changed for security purposes); TYPE: TXT NAME: _amazonses.somedomain.com VALUE: M2sXTycXkgZXXuMuWI8TczngaPIDDMToPefzGhZ3uYA= I have tried numerous entries in my registrar's DNS manager, but SES still fails to find what it's looking for. I am not a DNS guru, so, I have tried to construct the TXT record from very sparse examples, at best, to try to get this right. My present TXT record is this; "v=DKIM1 s=_domainkey d=_amazonses.somedomain.com p=M2sXTycXkgZXXuMuWI8TczngaPIDDMToPefzGhZ3uYA=" Am I doing something incorrect? Thanks

  Read the article

• SSL FTP fails on Windows 7 but not Windows XP clients

  - by Andrew Neely

  We currently use a free SSL-FTP client called Move-It-Freely to transmit data from a custom data entry program at over forty facilities scattered around the state to our central server. Under XP, it works flawlessly. Some facilities have upgraded to Windows 7. On these machines, uploads (transfers to us) work, downloads (transfers from us to them) fail. Replacing the Windows 7 machine with an XP machine solves the problem. We have also verified that the network firewall settings have not changed. This problem persists even if Windows firewall is not running. We were able to remote into one of the Windows 7 machines to verify that the Windows firewall was indeed turned off. We cannot replicate the problem on our own Windows 7 machines, and are at a loss of how to fix this feature for our customers. The data contain health-related information, and needs to be encrypted (hence SSL-FTP.) Despite hours spent on Google, we cannot find a solution.

  Read the article

• Email solution for new domain [on hold]

  - by user196286

  I registered my domain at NameCheap, and have it hosted now at AWS Route 53. However, I'm at a loss for how now to set up sending transactional email. I hear Amazon SES is a good solution, but that requires me to verify my e-mail. I don't have email set up (no e-mail addresses at my domain nor a email client to receive the email verification). As an added wrinkle, I have my sitename.com bucket redirecting to www.sitename.com, and I'm hosting my site on Route 53 using www.sitename.com. However, does this screw things up if I need to switch my MX records since perhaps the 'www' throws things off (would it point to mail.www.sitename.com)?

  Read the article

• DNS and RPC Unavailable

  - by Berek Bryan

  I have a server that is host a MSSQL database and some other server related tasks. The server communicaties with a large number of devices. The devices send data to the server. The communication links are down between the devices on the intranet and to the outside world. However it seems I can ping and can be pinged from machines on the same switch. This includes the DNS Servers. When I run, C:\ipconfig /registerdns I get RPC Server is Unavailable. So, it seems that the server can not verify the DNS server. Both DNS server are up and running. No other machines are affected on the network.

  Read the article

• Current alternative to the old CHECKSUM program

  - by faulty

  I'm looking for an application that does md5/sha hash check on specific files/folders periodically and store an index file per folder for future verification. I remember such application exist in DOS days, to detect files infected by virus. The main purpose for this is to detect corrupted copy of backup, as I understand that consumer grade hardware are not 100% error free when doing backup or file transfer from device to device. The hash can also be used to generate a list of changed files for backup. Most of the software I can find is hash manually. EDIT: Windows based application, preferably a shell extension which I can right click on a folder and do a checksum/verify all files in that folder. Even better if that can integrate with a backup/sync program like BeyondCopy

  Read the article

• Lync using SQL 2008 R2 SP1 - Publish Topology error

  - by EKS

  Error that shows in the web page opened by the Topology builder: Error: An error occurred: "Microsoft.Rtc.Common.Data.SqlConnectionException" "A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)" Looking in the log file: ( I assume this is the acutal error making it STOP) Installed SQL Server 2005 Backward Compatibility version is 8.05.1054 Error: SQL Server 2005 Backward Compatibility is not installed or its version is not high enough. SQL Server 2005 Backward Compatability SP2 or higher must be installed. I have installed SQLServer2005_BC_x64.msi from MS, and cant seem to find this SP2 version. SQL server is a 2008 R2 SP1. I have also tested with a 2008 SP3 SQL server same error. Named pippes output via ( OSQL /L) SQL-2008-1 SQL2

  Read the article

• install PECL JSON in PHP 5.04

  - by Radu Maris

  It's OK (compatible) to install PECL native JSON (from here) in PHP 5.0.4, on a production server running FC4 where unfortunately I cannot update PHP to at least 5.2 ? If there is a good chance to screw up PHP instalation on the server, I will not try to install it, and I will stick to Service JSON ( http ://svn.php.net/viewvc/pear/packages/Services_JSON/trunk/ ) In documentation ( http ://aurore.net/projects/php-json/ ) I have found: A simple ./configure; make; make install should do the trick. Make sure to add an extension=json.so line to your php.ini/php.d. (but I can't find anythink about compatible versions of PHP) Thank you. (Please don't tell me to update the OS and PHP, beacause it's not my decision :( )

  Read the article

• Windows setup claims the installation source is not accessible. How do I fix this?

  - by Wil

  I'm trying to install Windows 7 Ultimate over my existing Windows 7 Professional. I downloaded the ISO from Microsoft and burned the install disc at the slowest speed possible (x3). I booted to the DVD, but at the second screen I am already getting an error! That screen I am choosing between "Upgrade" and "Custom". I am trying to choose "Custom" but then I get the error: Windows installation encountered an unexpected error. Verify that the installation sources are accessible, and restart the installation. Error code: 0xE0000100

  Read the article

• What is it that automatically checks config changes (such as those in /etc) into git?

  - by Brandon

  I remember reading on the ubuntu forums some time ago about a program to automatically check configuration changes into version control for you. It was (of course) not Ubuntu-specific. I'm pretty sure it used git, though it may have been svn, or perhaps even able to work with multiple different VCSs. My Googling has turned up nothing, and I'd rather not roll my own script if someone has already done this well. Of course I could just manually check things in, but there are reasons I'd like it done automatically. (I'm actually planning to use this for my LastSession.plist file for Safari, so when the #@$%^*&! thing crashes, and I don't restore everything, and then Leopard crashes, the fact that it has such lousy session management won't mean I lose the dozens of windows with dozens of tabs I had open.)

  Read the article

• Best way to keep configuration for server reinstallation?

  - by Gunnar

  I have a server at home running Ubuntu 12.04 which has grown messy over the years. I have fiddled with various packages, desktop environments (for VNC) etc. and I would like to reinstall it to start again, and have better control over what goes into the box. But I want to keep much of the configurations after reinstallation, like LVM configuration, apache2, samba, etc etc. There would ideally exist a program which could analyze /etc, installed packages and such, store the information, and selectively put it back into the new installation. I am even considering installing Ubuntu server on a virtual machine, just to be able to compare the contents of /etc with a clean installation, and even perform a migration to the virtual machine first, to verify that the transfer process works. How do one go about performing this kind of reinstallation? Have anyone seen any resources on the net on the topic?

  Read the article

• Blackberry Gmail password change

  - by Highstead

  I've updated my gmail password and so i must update my blackberry password. I tried updating the email password to which i got the following message. Invalid email address or password. Please verify your email address and password. The information you provided is incorrect. If the error persists contact gmail.com (Your email provider). Please try again. I tried again, with what i know the password to be, with password show on. I've also deleted the account and tried to create it. I've tried going to the "Last account activity: XXXX details" menu and signing out all devices. I'm continually getting the above error, but the account activities don't seem to show any sign of a mobile attempt to access my mail account. Has anyone had this issue before and how did you sign it. Thanks in advance.

  Read the article

• Setting up NFS server on Gentoo

  - by StackedCrooked

  I'm trying to set up an NFS server on a Gentoo VM. I've installed nfs-utils-1.2.2 and added the following line to the /etc/exports file: /root/svn 10.0.0.0/255.0.0.0(rw,sync,no_subtree_check) However, when I try to start the nfs service I get the following errors: gentoo-amd64-francis orig # /etc/init.d/nfs start FATAL: Could not load /lib/modules/2.6.24-9-pve/modules.dep: No such file or directory * Exporting NFS directories ... [ ok ] * Starting NFS mountd ... [ !! ] * Starting NFS daemon ... [ !! ] * Starting NFS smnotify ... [ ok ] It complains about not finding the /lib/modules/2.6.24-9-pve/modules.dep file, but the /lib/modules directory doesn't even exist on this machine. Can anyone help me getting it to work?

  Read the article

• CentOS openLDAP cert trust issues

  - by 84104

  # LDAPTLS_CACERTDIR=/etc/ssl/certs/ ldapwhoami -x -ZZ -H ldaps://ldap.domain.tld ldap_start_tls: Can't contact LDAP server (-1) additional info: TLS error -8172:Peer's certificate issuer has been marked as not trusted by the user. # openssl s_client -connect ldap.domain.tld:636 -CApath /etc/ssl/certs <... successful tls negotiation stuff ...> Compression: 1 (zlib compression) Start Time: 1349994779 Timeout : 300 (sec) Verify return code: 0 (ok) --- openssl seems to think the certificate is fine, but openldap's libraries (pam_ldap exhibits similar behavior, which is how I got on to this mess) disagree. What am I doing wrong?

  Read the article

• ffmpeg add two audio streams to video

  - by Tossin Hausen

  I tried this: ffmpeg -i /sdcard/video/transcode/video.avi -map 0:0,0 -i /sdcard/video/transcode/first.mp3 -map 1:0,1 -i /sdcard/video/transcode/second.mp3 -map 2:0,2 -acodec copy -vcodec py /sdcard/video/transcode/Output.avi to add two audio streams to one video file. But ffmpeg says the number of mappings should match the number of output streams. What is wrong here? I'm trying to work with an Android build of FFmepg "ffmpeg for android beta". "Does not work" means that this uncommunicative Android build of FFmpeg just stops without giving any error message. The -codec copy option does not work with this build. Now I tried the same set of files with the FFmpeg called command line tool that comes with Ubuntu 10. Something (can't say where it is from). The -codec copy option does not work with this FFmpeg too. Here the complete output: m30x:~/movie/Film$ ffmpeg -i input.avi -i first.mp3 -i second.mp3 -map 0 -map 1 -map 2 -acodec copy -vcodec copy output.avi FFmpeg version SVN-r0.5.9-4:0.5.9-0ubuntu0.10.04.1, Copyright (c) 2000-2009 Fabrice Bellard, et al. configuration: --extra-version=4:0.5.9-0ubuntu0.10.04.1 --prefix=/usr --enable-avfilter --enable-avfilter-lavf --enable-vdpau --enable-bzlib --enable-libgsm --enable-libschroedinger --enable-libspeex --enable-libtheora --enable-libvorbis --enable-pthreads --enable-zlib --disable-stripping --disable-vhook --enable-runtime-cpudetect --enable-gpl --enable-postproc --enable-swscale --enable-x11grab --enable-libdc1394 --enable-shared --disable-static libavutil 49.15. 0 / 49.15. 0 libavcodec 52.20. 1 / 52.20. 1 libavformat 52.31. 0 / 52.31. 0 libavdevice 52. 1. 0 / 52. 1. 0 libavfilter 0. 4. 0 / 0. 4. 0 libswscale 0. 7. 1 / 0. 7. 1 libpostproc 51. 2. 0 / 51. 2. 0 built on Jun 12 2012 16:27:34, gcc: 4.4.3 [NULL @ 0x93cfd10]looks like this file was encoded with (divx4/(old)xvid/opendivx) -> forcing low_delay flag Seems stream 0 codec frame rate differs from container frame rate: 30000.00 (30000/1) -> 25.00 (25/1) Input #0, avi, from 'input.avi': Duration: 01:30:33.00, start: 0.000000, bitrate: 901 kb/s Stream #0.0: Video: mpeg4, yuv420p, 576x432, 25 tbr, 25 tbn, 30k tbc Input #1, mp3, from 'first.mp3': Duration: 01:30:32.84, start: 0.000000, bitrate: 63 kb/s Stream #1.0: Audio: mp3, 22050 Hz, stereo, s16, 64 kb/s Input #2, mp3, from 'second.mp3': Duration: 01:30:32.84, start: 0.000000, bitrate: 63 kb/s Stream #2.0: Audio: mp3, 22050 Hz, stereo, s16, 64 kb/s Number of stream maps must match number of output streams Merging only one audio stream with the video stream works with Ubuntu and Android version of FFmpeg. Here the complete output: ffmpeg -i input.avi -i first.mp3 -map 0 -map 1 -acodec copy -vcodec copy output.avi FFmpeg version SVN-r0.5.9-4:0.5.9-0ubuntu0.10.04.1, Copyright (c) 2000-2009 Fabrice Bellard, et al. configuration: --extra-version=4:0.5.9-0ubuntu0.10.04.1 --prefix=/usr --enable-avfilter --enable-avfilter-lavf --enable-vdpau --enable-bzlib --enable-libgsm --enable-libschroedinger --enable-libspeex --enable-libtheora --enable-libvorbis --enable-pthreads --enable-zlib --disable-stripping --disable-vhook --enable-runtime-cpudetect --enable-gpl --enable-postproc --enable-swscale --enable-x11grab --enable-libdc1394 --enable-shared --disable-static libavutil 49.15. 0 / 49.15. 0 libavcodec 52.20. 1 / 52.20. 1 libavformat 52.31. 0 / 52.31. 0 libavdevice 52. 1. 0 / 52. 1. 0 libavfilter 0. 4. 0 / 0. 4. 0 libswscale 0. 7. 1 / 0. 7. 1 libpostproc 51. 2. 0 / 51. 2. 0 built on Jun 12 2012 16:27:34, gcc: 4.4.3 [NULL @ 0x9bfad10]looks like this file was encoded with (divx4/(old)xvid/opendivx) -> forcing low_delay flag Seems stream 0 codec frame rate differs from container frame rate: 30000.00 (30000/1) -> 25.00 (25/1) Input #0, avi, from 'input.avi': Duration: 01:30:33.00, start: 0.000000, bitrate: 901 kb/s Stream #0.0: Video: mpeg4, yuv420p, 576x432, 25 tbr, 25 tbn, 30k tbc Input #1, mp3, from 'first.mp3': Duration: 01:30:32.84, start: 0.000000, bitrate: 63 kb/s Stream #1.0: Audio: mp3, 22050 Hz, stereo, s16, 64 kb/s Output #0, avi, to 'output.avi': Stream #0.0: Video: mpeg4, yuv420p, 576x432, q=2-31, 90k tbn, 25 tbc Stream #0.1: Audio: libmp3lame, 22050 Hz, stereo, s16, 64 kb/s Stream mapping: Stream #0.0 -> #0.0 Stream #1.0 -> #0.1 Press [q] to stop encoding frame= 6157 fps=6156 q=-1.0 size= 31667kB time=246.28 bitrate=1053.3kbits/s Do you have an idea why it does not work with two audio streams? By the way, ffmpeg -i input_with_first_audio_stream.avi -i second.mp3 -acodec copy -vcodec copy output_two_audio_streams.avi -newaudio works with both versions of ffmpeg that I use, but the first audio stream is played too fast (x10 or more), while the second audio stream is played correct. Many thanks in advance and sorry for my unconventional question and outdated versions of ffmpeg. But I am a lamer and it is not so easy for me to compile from the source (especially for the Android version). I will try to compile an up to date version of ffmpeg with Ubuntu, but I don't have much free time.

  Read the article

• OpenLDAP server logs filled with "TLS negotiation failure"

  - by WildVelociraptor

  I recently migrated an old OpenLDAP setup to a newer server, with a more robust certificate setup. Currently, most hosts are required to verify the cert matches the host: tls_checkpeer yes TLS_REQCERT always In the server logs, there are multiple occurences of: Nov 6 10:45:08 <servername> slapd[1773]: conn=2785646 fd=35 closed (TLS negotiation failure) These errors appear from multiple hosts, but there don't seem to be any issues actually logging into those servers with an LDAP account. Does anyone know what would cause these errors? The server is running Ubuntu 12.04.2, and OpenLDAP version 2.4.28. The cert was generated using GnuTLS.

  Read the article

< Previous Page | 126 127 128 129 130 131 132 133 134 135 136 137  | Next Page >