Search Results

Search found 6942 results on 278 pages for 'enabled'.

Page 131/278 | < Previous Page | 127 128 129 130 131 132 133 134 135 136 137 138  | Next Page >

• Routing using Linux with 2 NIC cards

  - by Kevin Parker

  Configured Clear OS to be in Gateway mode on a machine with two NIC cards. eth0:192.168.2.0/24 with ip 192.168.2.27 which is connected to a modem and thus have internet connectivity. eth1:192.168.122.0/24 with ip 192.168.122.10 which is connected to other machines in LAN through switch. LAN machines with network 192.168.122.0 is not getting internet.How can they get internet Through Clear OS gateway.I have enabled packet forwarding in clear os using "ip_forward=1" What am i missing?.Can you please help me in this. Following are the static routing i have added: on LAN machine1 with ip address 192.168.122.11 ip route add 192.168.2.0/24 via 192.168.122.10 dev eth0 ip route show 192.168.2.0/24 via 192.168.122.10 dev eth0 192.168.122.0/24 dev eth0 proto kernel scope link src 192.168.122.11 But still 192.168.2.0/24 network is not reachable.Where can be the problem??

  Read the article

• how to remotely setup powershell to accept Enter-PSSession

  - by user1399195

  I have some computers I'm trying to remotely execute powershell commands but I'm running into some snags. For one thing, the computers do not have Enable-PSRemoting enabled so I am unable to simply Enter-PSSession. I tried to run a powershell script through psexec but I have yet to Set-Execution Policy on the machine. My thoughts were to execute a powershell logon script that accomplished this but before I tried this I was going to see if there were any other methods to enable-psremoting on a machine. Thanks in advance!

  Read the article

• Computer wakes itself few seconds after hibernation

  - by Juan Zamudio

  Hi all, this is the situation, this is a Dell Optiplex 755, I recently upgraded it to Windows 7 64 bits, it had Windows XP SP3 previously, on XP I never had a problem hibernating the PC, now with Windows 7 64 every time I hibernate the PC it wakes it self after 5 or so seconds. Here are the steps I already tried: On Windows 7 I enabled the hibernation following this steps In the MoBo the sleep settings are on S3 In the Mobo I disable remote wake ups I have disabled the remote wake up in the NIC When I run the lastwake command I get unknown device or something like that I already disable the wake timers on Windows I have the latest drivers from Intel, but I just found out that in the device Manager I get a warning sign on the "Intel AMT SOL (COM3)" device saying that it failed and windows stopped the device, I reinstalled the Intel drivers but nothing changed. The only thing that I haven't touch is Intel ME in the MoBo but I don't if that could help and what settings are correct. Thanks for you help.

  Read the article

• Does Exchange support plussed users (e.g. [email protected]) or a similar mechanism?

  - by Jens Bannmann

  Sendmail supports a feature called 'plussed users'. Once enabled, emails sent to [email protected], [email protected] and [email protected] are automatically delivered just like mails to [email protected]. There is no need to register or set up these 'plus suffixes'. The user can just use them and set up client-side filtering rules on his own. Does Exchange support a similar mechanism? If so, how to enable it? Note that I don't want answers about other means of filtering, e.g. spam/junk filtering, server-side or client-side rules, email aliases/addresses that are configured explicitly and so on.

  Read the article

• How to set Laptop Brightness in Gnome and /proc on Thinkpad W510?

  - by hakre

  I can set the brightness of my laptop screen already via /proc. I can read and change the value. Now I've set the value to 33 and then I went into gnome power management and enabled the option that it should reduce the backlight brightness being on battery. That works, the screen gets darker. If I now read out the current setting from /proc it still says it's 33. So I assume that there is another node in /proc to be used to control the brightness. The node I use so far is: /proc/acpi/video/VID/LCD0/brightness I'm using the nouveau driver. With the nvida driver the brightness can not be controlled.

  Read the article

• Win 2008 Server & IIS7: ASP installed but displays 'FILE DOWNLOAD - SECURITY WARNING"

  - by AzC

  Hi Dudes, Installed Win 2008 server and IIS7. Enabled ASP Classic and ASP.NET on it. Can't get any ASP scripts to run e.g. desperate.asp containing following line: <% Response.Write "Hello Love, Fancy a Date?" % It just comes up with a "FILE DOWNLOAD - SECURITY WARNING" panel asking em to download. When I select anything it keeps looping. Found lots fo stuff on internet but nothing working. Also same for other ASP scripts HTML works no problem e.g. a file called reply.html containing: Get lost little boy. We only serve French Fries in Macdonalds Any ideas?

  Read the article

• Windows 8 Secureboot: How do you bootup from another device such as cd/dvd drive or usb flash etc.?

  - by Victor T.

  On PC's and laptops running an older OS, this is just a simple matter of going into the BIOS and setting the boot sequence and putting the boot cd/dvd in the drive. In many cases you can even just hit one of the F* function keys to bring up the boot sequence menu on-the-fly during POST. The main problem I'm running into is that other devices besides the primary HD is disabled when SecureBoot is enabled. So far the only way I've gotten it to work is to disable SecureBoot and enable something called legacy mode. Needless to say this make it difficult to boot things like OS recovery tools, PartitionHD backups, Linux LiveCD's and a bunch of others. Is there another procedure for doing this since it seems to mess up the Windows 8 install? By mess up I mean that after re-enabling SecureBoot and starting Windows 8 normally, the OS goes into a 'preping repair phase' for some reason that takes forever to complete before getting into a usable desktop.

  Read the article

• Using unsigned drivers in Windows 8

  - by T. Fabre

  I just migrated from Windows 7 x64 to 8, but I can't get my VPN software to run anymore : the SafeNet IKE service (installed by SafeNet SoftRemoteLT GA, used by my VPN provider) cannot start anymore. I found that by default unsigned drivers are disabled on Win8, and that is what is blocking the driver. The System event log tells me that the driver (apparently, C:\WINDOWS\SysWow64\Drivers\IPSECDRV.sys ) was blocked when I try to manually start the service (SafeNet IKE Service). I get the same messages for another driver, crypto.sys found in the same folder. I tried using bcdedit to enable unsigned drivers : bcdedit /set loadoptions DDISABLE_INTEGRITY_CHECKS bcdedit /set testsigning ON After reboot, same error. I tried by booting into Win 8's test mode, same issue. Applying the code signing policy (Enabled, Ignore) does not help either. Running gpresult does show that the policy is applied. Any help welcome.

  Read the article

• Intel site says VT-x is supported on my CPU, but tests say otherwise

  - by Anshul

  I have a laptop with an Intel 2nd Gen. i7-2729QM (http://ark.intel.com/products/50067/) and the Intel site says that it supports VT-x, but I've downloaded the Intel Processor Identification Utility (http://www.intel.com/support/processors/tools/piu/sb/CS-014921.htm) and the test says that my CPU does not have VT-x. There is no option in my BIOS that allows me to enable/disable VT-x. I researched my laptop model (SAGER NP8170) and most forums say that it's enabled by default and there's no option in the BIOS. So assuming that's true, what gives? I also downloaded another tool called SecurAble from GRC and it also says that my CPU doesn't support VT-x. VirtualBox also says that my CPU does not support virtualization. My mind is boggled by why it says on the Intel site that my CPU supports VT-x but all other tests show otherwise. Anyone know what's going on? Thanks in advance.

  Read the article

• Accessing localhost on IIS7 from another computer on the network

  - by Adam

  I recently upgraded computers to Windows 7 Professional and am running IIS7. When I'm on my computer I can easily access localhost through my web browser but when I try from another computer on my network (replacing localhost with my computer name) it doesn't work. I also tried using "computername.domain.com" and still no luck. I can access other computers running Windows XP and IIS 5 but I'm having no luck accessing my own from another computer. I checked and my IIS7 has anonymous users enabled. Am I missing any other setting? Is this an IIS7 thing or am I missing a setting? Thanks in advance!

  Read the article

• Alternatives for HP ProtectTools on EliteBook 2530p

  - by AlexDuggleby

  Hi, I'd like to use the HP fingerprint sensor on my Elitebook 2530p. The system is a fresh Win7 Enterprise 64-bit and we are looking for an alternative to the HP ProtectTools Security Suite, which seems a bit bloated. We have tried the UPEK ProtectorSuite (both WBF and stand-alone edition) and they say they can't find the fingerprint device. The device shows up in device manager, in the BioMetric system configuration I have enabled logon to Windows and Domain credentials. Are there any other fingerprint login software (free or commercial) that you can recommend. Thanks in advance, Alex

  Read the article

• How can I add config options for a specific hostname outside <VirtualHost>?

  - by Boldewyn

  I'm using Apache 2.2 and let it serve domains foo.example.com and bar.example.com with <VirtualHost> statements: <VirtualHost 127.0.0.1:80> ServerName foo.example.com </VirtualHost> <VirtualHost 127.0.0.1:80> ServerName bar.example.com </VirtualHost> My problem is, that I need to add configuration options, that are only targeted at foo.example.com, in a separate file (let's say, /etc/apache/sites-enabled/foo.conf). This file will be included, before the VirtualHost statement is issued, but it can't be embedded inside it. Can I (and if yes, how) target configuration settings to foo.example.com requests only, outside the VirtualHost container?

  Read the article

• How do I usb tether my Cyanogen modded G1's internet connection to my Toshiba Tecra 8000 running Xubuntu?

  - by atticus

  I have usb-tethering enabled in my phone. It works fine with Vista. When I plug my phone into my Tecra 8000 laptop running Xubuntu, dmesg shows: "usb 1-1: new full speed USB device using uhci_hcd and address 8". I see that the OS has detected it as a storage device, but I can't get it to function correctly as a network device. /dev/us* shows no usb0, but it does show /dev/usbdev1.1_ep00 /dev/usbdev1.1_ep81 /dev/usbdev1.8_ep00 ... usbdev1.8_ep83 I could just use the wireless tether app for android, but I can't get my Netgear wg511 v2 (made in China) wireless card to work in this laptop either. But that's another post for later.

  Read the article

• Nothing is written in php5-fpm.log

  - by jaypabs

  I have two servers which is Ubuntu 12.04 and Ubuntu 14.04. When I use Ubuntu 14.04 in my new server and enabled the php-fpm log file found under /etc/php5/fpm/php-fpm.conf that reads as follows: error_log = /var/log/php5-fpm.log I noticed that most of the log that I found in Ubuntu 12.04 is not written in 14.04. For example, if I restart php5-fpm in my Ubuntu 12.04, a restart log is being written, however, this does not happen in 14.04. Another log which I missed in 14.04 are the following: [23-Aug-2014 16:23:03] NOTICE: [pool web42] child 118098 exited with code 0 after 12983.480191 seconds from start [23-Aug-2014 16:23:03] NOTICE: [pool web42] child 147653 started [23-Aug-2014 17:27:31] WARNING: [pool web8] child 76743, script '/var/www/mysite.com/web/wp-comments-post.php' (request: "POST /wp-comments-post.php") executing too slow (12.923022 sec), logging I really wanted to have this kind of log so I will know the length of time a slow script has executed. Does anyone know if there are other settings in Ubuntu 14.04 that I need to change in addition to /etc/php5/fpm/php-fpm.conf?

  Read the article

• Ad Agency storage/file server +backup needed (NAS or something else?)

  - by Rob

  Looking for a "this is all you need" recommendation. We're a small ad agency with both mac & pcs that access and share files from a 3 yr old Windows 2000 box (no server software). We currently have 1TB on the "server" and back it up to 2 different Seagate Free Agent Pro 1TB external drives. But we're low on space and are looking for something that's bigger, that we can still access from Mac & PC, EASY backup system, secure from viruses, firewall enabled. Not sure if a NAS will work or if we should have a real server. We don't really get on that box except to restore files, or run Norton on it. I hope I've provided enough for a general recommendation. Thanks. Rob Phx

  Read the article

• Realtek "Microphone Effects" no longer working

  - by abc

  I have a mic plugged into my computer, and I was able to use the "microphone effects" tab here to enable/disable noise suppression and acoustic echo cancellation. Noise suppression off and acoustic echo cancellation on were the most recent settings I had on before the problem occurred. I disabled my mic in the windows 7 "recording devices" tab, then re-enabled it. When it came back, these options were grayed out, and remained so even after a reboot. I am not sure why this is or how to fix it, all other options are still the same (Settings are identical to when it was working). Any ideas whats wrong or how to fix it? edit: can't post image due to being new.

  Read the article

• How to enable directory browsiing in IIS7?

  - by frankadelic

  How I enable directory browsing in IIS7? MS technet says this can be done in the IIS console: Open IIS Manager and navigate to the level you want to manage. In Features View, double-click Directory Browsing. In the Actions pane, click Enable if the Directory Browsing feature is disabled and you want to enable it. Or, click Disable if the Directory Browsing feature is enabled and you want to disable it. http://technet.microsoft.com/en-us/library/cc731109%28WS.10%29.aspx However, my IIS console doesn't have the Directory Browsing option mentioned in Step 2. How can this option be made available. Note, this is for a static HTML site, so I don't have any web.config or ASPX files.

  Read the article

• Does SMTP greylisting a) stop much spam and b) stop much legitimate mail?

  - by Whisk

  I've just set up an SMTP server on a relatively little used domain using Postfix and enabled greylisting with SQLGrey. So far it seems to be working OK, and while there's the slight irritation of delays to emails from new senders, I can see from the logs that it's deterring a number of spam messages. In your experience does greylisting effectively stop much spam? Is it a useful addition to e.g. SpamAssassin or is adding it on top overkill/unnecessary? If I were to roll this out to heavier use domains (perhaps with more demanding users) would you anticipate a significant portion of poorly configured mail servers that would end up bouncing or losing messages?

  Read the article

• Disable RAID Controller

  - by B.Mr.W.

  I have some decent HP Proliants server that come with "HP Smart Array P410i Controller" enabled, I am using these boxes to set up a Hadoop cluster and I know, RAID is for sure a no-no for Hadoop since the application itself will take care of data redundancy and extra intelligence provided by RAID won't be helpful and might turn down the performance. I tried to disable the devices at the BIOS and the box cannot even access the disk afterwards. So I am assuming the controller is sitting between disks and mother board, and we have to turn it on and configure it to "level0" or something like that. I am wondering what should I do to "disable" the RAID functionality so it will fit into the Hadoop environment.

  Read the article

• LPR command won't recognize CUPS printer

  - by Datapimp23

  I have a cups server with one shared printer configured on it. It prints test pages without problems. printername (Idle, Accepting Jobs, Shared) Description: desc Location: Driver: Zebra ZPL Label Printer (grayscale, 2-sided printing) Connection: socket://172.20.50.26 Defaults: job-sheets=none, none media=oe_w288h432_4x6in sides=one-sided This is the output from lpstat -t. it shows that the printer is idle and accepting requests admin@SERVER:~$ lpstat -t scheduler is running no system default destination device for printername: socket://172.20.50.26 printername accepting requests since Thu 26 Jan 2012 01:29:35 PM CET printer printername is idle. enabled since Thu 26 Jan 2012 01:29:35 PM CET Now when I want to send a printjob to it via an LPR command it won't recognize the printer /usr/bin/lpr -P printername test.pdf Result lpr: ttn_seg_zebra1: unknown printer What am I missing here ?

  Read the article

• How can we monitor a HTTPS URL?

  - by Animesh

  A couple of our recent customers have had their applications configured for HTTPS only. Currently we are using a tool which does a good job of monitoring customers' app-server state. For the existing customers, HTTP URLs also work, so the tool can monitor the health. But the recent one have only the HTTPS enabled so the tool fails automatically. To this end, I am looking for a tool which would monitor the app-server state and send email to the group. Simple monitoring like checking to see if the app-server is up or not is all I would need. But more features are also definitely helpful. Thanks!

  Read the article

• apache httpd cannot browse through browser

  - by nuttynibbles

  i've setup apache and php on a virtual machine. everything works fine in the virtual machine. im able to execute php files and run up phpmyadmin connecting to mysql. on my host machine, im able ping and ssh into the remote machines. however, im unable to browse the php files on the host browser using the ip address. in my httpd.conf, im listening to port 80. i enabled the ServerName 192.168.75.102:80 am i missing some settings? port settings maybe?

  Read the article

• Dell V105 printer and OS X 10.6

  - by James

  I am trying to get a Dell V105 printer to work with my iMac. It is running 10.6 and I have installed all the drivers on the Snow Leopard disk. I believe there is no official Dell driver but I have also heard the Dell printers are made by third parties that may sell the same printer under different names. There a quite a few Lexmark models that seem to look very similar and I have tried setting the driver to the 2600 series that looks very similar but that has not enabled me to print. Although it claims to give me the supply levels correctly. Can anyone help? Thanks for your time

  Read the article

• How would you diagnose an integrated network card that doesn't show up on the device list?

  - by Tomer Gabel

  I've been setting up a server based around a Gigabyte GA-G33M-DS2R motherboard (G33, PCH9R with integrated Realtek 811B network device. I've enabled it in the BIOS, but it doesn't show up in the pre-boot PCI device list, isn't recognized by Windows (even after installing the chipset and networking drivers) and doesn't even show up via lspci. I've tried cycling power, disabling, cycling again, enabling, cycling again etc. to no avail. I'm sort of at a loss at this point; the board isn't under warranty anymore, but I'd rather not have to replace it. Any advice would be greatly appreciated...

  Read the article

• Why can't I open my Access application in design mode?

  - by mmyers

  I have been given an Access 2007 application (mainly VB code) that I need to modify. It has been locked down for production, so the toolbars and so forth are not visible. However, it is a .mdb file, not .mde, so in theory it should be possible to get into design mode by holding Shift while opening it. But that method has only worked a total of three times out of the (probably) 60 or 70 times I've tried. I realize now that I should have enabled the toolbars while I had it open, but unfortunately hindsight doesn't get me anywhere now. Does anyone know what might be causing the problem? Is it my own fault, or the application's, or Access's?

  Read the article

< Previous Page | 127 128 129 130 131 132 133 134 135 136 137 138  | Next Page >