Search Results

Search found 19419 results on 777 pages for 'network study'.

Page 132/777 | < Previous Page | 128 129 130 131 132 133 134 135 136 137 138 139  | Next Page >

  • How to logon to a non-domain computer from one in a domain

    - by Svish
    I've met a rather annoying problem that should be very simple, but I can't seem to figure it out. I have a work laptop that is part of a domain, so my username is foobar\bob. I also have my home computer with no domain, just the username bob. I'm trying to connect to a share on my home computer from my work computer. It's asking me for my username and password, which is bob, but when I type in bob it assumes I mean foobar\bob, which of course doesn't work. I've tried to use hostname\bob, but that doesn't seem to work either... What can I do here? Both computers are running Windows 7.

    Read the article

  • Computer sending data while turned of

    - by Nicklas Ansman
    I have a some what strange problem (which could have and easy and obvious solution for all I know). My problem is that when I've booted ubuntu (now 10.4 but same problem with 9.10) and turns it off it starts sending a HUGE amount of data via the ethernet cable, so much in fact that my router can't handle it and stops responding. As far as I can tell the computer is completely turned off with no fans spinning. I can add that if I boot windows I do not have this problem, just when exiting ubuntu. There are two "fixes" for my problem: Pull the ethernet cable until the next boot Turn off power to the PSU and wait for the capacitors to unload Is there anyone who knows what could be going on? I'd be happy to post some logs or conf-files. Currently I'm using the ethernet port on my motherboard which is a Asus P6T Deluxe V2 with an updated version of the BIOS (maybe not the latest but since it only happens when I've been in ubuntu I don't wanna mess with the BIOS too much). Regards Nicklas

    Read the article

  • How to connect two subnet with Windows Server?

    - by 9dan
    Hello, I have some work to do in a small office. This office has two separate Internet connections. One is a kind of DSL line and connected through the Internet sharing router (DHCP). One is a leased line with public IP adresses (No DHCP). This leased line provide only 30 IP addresses and the gateway is provided by the ISP. Some workers use private IP provided by the router, some workers use manually setup public IP. There is a Windows 2008 R2 server with two NICs, connected to each lines. I want to connect/merge(?)/bridge(?) two subnet with this server so that users from the different subnet can access each other. How can I accomplish this? Something like, add gateway function to this server and public IP users change the gateway to point this server.. It it possible ? Sorry for my rambling. Thanks in advance.

    Read the article

  • How to disable shared folders passowrd prompt on window & Linux

    - by user53864
    I'm using windows xp, vista, server 2008 R2, ubuntu-linux 9.10, 9.04, 8.10 desktop editions. I shared some folders/directories in windows and in ubuntu machines. Normally for the first time it's prompted for the password when tried to access the shared folders on either of the machine and again they prompt for the password when the system is rebooted. Recently I've created a batch and sh script which copies from the shared folders from windows to ubuntu and vice-versa. But the scripts cannot automate the password prompt and I'm wondering if I could disable the password prompt of the shared folders on windows and as well as on ubuntu machines so that my script runs smoothly. I don't know if it's possible or not but want to confirm posting here and if it is then nothing but saying need help...!. Thanks all!

    Read the article

  • Methodologies for performance-testing a WAN link

    - by Chopper3
    We have a pair of new diversely-routed 1Gbps Ethernet links between locations about 200 miles apart. The 'client' is a new reasonably-powerful machine (HP DL380 G6, dual E56xx Xeons, 48GB DDR3, R1 pair of 300GB 10krpm SAS disks, W2K8R2-x64) and the 'server' is a decent enough machine too (HP BL460c G6, dual E55xx Xeons, 72GB, R1 pair of 146GB 10krpm SAS disks, dual-port Emulex 4Gbps FC HBA linked to dual Cisco MDS9509s then onto dedicated HP EVA 8400 with 128 x 450GB 15krpm FC disks, RHEL 5.3-x64). Using SFTP from the client we're only seeing about 40Kbps of throughput using large (2GB) files. We've performed server to 'other local server' tests and see around 500Mbps through the local switches (Cat 6509s), we're going to do the same on the client side but that's a day or so away. What other testing methods would you use to prove to the link providers that the problem is theirs?

    Read the article

  • Ubuntu network card problem.

    - by Steve Greene
    Hello folks, Several days ago, I installed Ubuntu 9.10 onto my Acer Aspire 3100 laptop, running it alongside Widows Vista as a dual-bootable system. Creation of the Ubuntu boot CD went fine, and the installation onto my hard drive was flawless. Ubuntu opens and behaves as I would expect, except for one little problem. For reasons unknown to me, Ubuntu is not communicating with my laptop's networking hardware, and I have no internet connectivity, it works fine under Windows Vista. Up in the right side of the Ubuntu desktop, I click on the network icon and it does not show a wireless connection at all. At home, where I use a dialup modem, I also see no means of getting online. My modem is an HDAUDIO Soft Data Fax Modem with Smart CP,manufactured by CXT (Conexant Systems Inc., file version 4.0.13.0, and the driver version is 7.58.0.0). I am an advanced computer user, but I am not a programmer. I seek a solution that is user-friendly for normal people, something equivalent to a driver that I can easily install or activate that will allow Ubuntu to see my hardware and get me connected. Can anyone help me over this hopefully-little glitch My processor is a Mobile AMD Sempron Processor 3500+ at 1.80 GHz, 1.50 GB RAM, and a 32-bit Operating System.

    Read the article

  • Free or inexpensive compression proxy

    - by Maksee
    Hi, I'm looking for a way to minimize the net traffic use with my netbook mobile internet connection. Recently I managed to install Opera Mini on the XP and the opera approach of compressing the data helped a lot. But I would like to do the same with my favorite browser using http proxy that compress the data "on the fly". But searching for "compression proxy servers" I could not find any working host/port links. Is it a brand-new technology and therefore expensive or rarely available?

    Read the article

  • Hyperic HQ metrics not working

    - by Robin Weston
    I am having a problem with Hyperic HQ. Several metrics, some in IIS 6.x (Request Execution Time, Request Wait Time) and some in .NET 2.0 (Bytes in all Heaps, Exceptions Thrown per Minute), always show 0. If I view perfmon on the server itself I can see that the counters have values greater than zero. There are some metrics that work fine, such as Total Get Requests per Minute and the other IIS defaults. I have looked in the server logs but nothing obvious shows up. Please advise. Am happy to find more information if required.

    Read the article

  • Windows VPN always disconnects after < 3 minutes, only from my network

    - by hemp
    First, this problem has existed for almost two years. Until serverfault was born, I pretty much gave up on solving it - but now, hope is reborn! I've set up a Windows 2003 server as a domain controller and VPN server at a remote office. I am able to connect to and work over the VPN from every windows client I've tried, including XP, Vista, and Windows 7 without issue, from at least five different networks (corporate and home, domain and non.) It works fine from all of them. However, whenever I connect from clients on my home network, the connection drops (silently) after 3 minutes or less. After a short while, it will eventually tell me the connection has dropped and attempt to redial/reconnect (if I've configured the client that way.) If I reconnect, the connection will re-establish and appear to work correctly, but again will silently drop, this time after a seemingly shorter time period. These are not intermittent drops. It happens every single time, in exactly the same way. The only variable is how long the connection survives. It doesn't matter what type of traffic I send. I can sit idle, send continuous pings, RDP, transfer files, all of that at once - it makes no difference. The result is always the same. Connected for a few minutes, then silent death. Since I doubt anyone has experienced this exact situation, what steps can I take to troubleshoot my evanescing VPN?

    Read the article

  • Copying files from one machine to another

    - by arex1337
    I'm currently generating documentation on one machine, and publishing it to a web server using the following commands in a script: net use "\\someShare" PASSWORD /user:username del /S /Q "\\someShare" xcopy /E /Y Documentation\html\* "\\someShare\" However, it feels like a really bad idea to have a password as plain text in the script, so I'm looking for alternatives to my current solution. Ideas? I definitely would appreciate a solution that uses some kind of access control, as many different people should be allowed to publish their own documentation to the web server, but not mess with each other's docs.

    Read the article

  • What's port 1283?

    - by kbluck
    I see a lot of connection attempts to 1283/tcp on my firewall from a client computer to a Windows Server 2008 Domain Controller. What exactly is this traffic? Something to do with NetBIOS, perhaps?

    Read the article

  • Have to reset wireless frequently on iPad / Macs connected to Cisco WRV200

    - by retailevolved
    I have a Cisco WRV200 set up in our small office. The wireless signal works great for PCs, but I have found that Macs and iPads have to frequently reset the connection. It will be working for about 10 minutes, then stop. To fix it, I just turn off Airport and turn it on again. On an iPad, I have to go into settings, shut the wireless off, and then turn it on again. The router is broadcasting mixed B/G on channel 6. Security is WPA-PSK2. Anybody out there had similar issues with their router? How can I fix it?

    Read the article

  • Mac OS X 10.6.5 and link-local addresses (169.254.x.x)

    - by WMR
    Starting with the latest update of Mac OS X (10.6.5) all Apple applications (Safari, Mail, iChat, etc.) don't connect to the internet anymore, if the assigned IP address is from the 169.254.0.0./16 range. This is not a routing problem, I can still ping any server I want, even connecting via command line tools works. I know this problem could easily be fixed by changing the IP address to a more common RFC1918 address (e.g. 192.168.0.0./16), but this is what the ISP assigns via DHCP and I am not sure I can convince them (Xplornet) to change that. So I am wondering if there's a (hidden?) setting that would convince Apple applications, that they are in fact still online.

    Read the article

  • how to set up dual wireless routers (G and N) with single broadband connection

    - by user15973
    A local cafe has an 802.11g wireless router attached to either an 8- or 12Mbs broadband connection. Although many customers still have -g devices, an increasing number are showing up with 802.11n devices (e.g. Mac laptops, iPads). The cafe owner is content with his router's area coverage, but he would like for his customers to be able to take advantage of the higher -n download speeds. He could simply replace the -g router with a -n router, but reportedly -n routers slow down considerably when servicing both -g and -n connections. Another option would be to buy the -n router, run an Ethernet cable between the two routers, and (of course) hook up the broadband connection to one of the two routers. Still another option would be to attach an ordinary, wired switch to the broadband connection and then attach both routers to the switch. Aside from the cost issue, what are the tradeoffs of those approaches? Which would you recommend, and why? Is there a better option than the ones I mentioned? Thank you in advance for your advice.

    Read the article

  • Windows Vista/7 dropping Mac Server share points

    - by Hooligancat
    My Windows Vista and Windows 7 clients are having problems maintaining access to SMB shares on a Mac server. The initial connection to the server appears to be OK, as the Windows clients can see all of the server share points. However, the client randomly drops a couple of the server share points although the clients can still see the server. For example. If I have the following share points on the Mac server: Share A Share B Share C Share D Share E The Windows client can see these shares most of the time and can access them most of the time. But randomly a couple of the shares will just get dropped or go missing from the Windows client's ability to view them so I end up with something like: Share B Share D Share E All the share points are established int the same way with the same permission settings. My Mac OSX Server is set up with the following for SMB: SMB sharing enabled Standalone Server Workgroup of `CORPORATE` Allow Guest Access = YES Client connections limit = 100 Authentication: NTLMv2 & Kerberos and NTLM Code Page is Latin US (437) This is a workgroup master browser WINS registration is set to Enable WINS server (tried with setting off) Enable virtual share points for homes YES I noticed in my SMB file service log that the clients appear to connect OK, but I get the following error which implies a reset by either the server or the client: /SourceCache/samba/samba-187.9/samba/source/lib/util_sock.c:read_data(534) read_data: read failure for 4 bytes to client 192.168.0.99. = Connection reset by peer I am a bit stumped as to a direction to turn to try and get this to resolve. Continued attempts to access the server from the client will reconnect to the share points, but they inevitably get dropped again in the near future. Any and all help much appreciated.

    Read the article

  • Run command before and after printing with CUPS?

    - by leto
    Hello, this is a home setup. A central printer server (Linux) manages the queue, a HP 2430DTN is attached to it via 100Mbit/sec Ethernet. The printer is hooked up to a managable power source. A shell script watches the queue on the server (lpstat -o) and turn on the printer when there is a job. If the queue is empty for 10 minutes it turns the printer off. Now this setup messes up, stops the printer etc. after a couple of weeks and is in general "not so reliable". I now know how to change the stop-printer thing, but: Is there a way to run my turn printer on script and turn printer off script directly from cups without watching the queue? That would be so cool!

    Read the article

  • Can I share my cable internet connection through my ADSL wireless router?

    - by Roaders
    Hi All Over the xmas period I am at my in-laws. They have Virgin Broadband (cable) and have a basic modem / router that is plugged directly into their computer using an ethernet cable. My wife and I arrived with 5 PCs! (ok, one is a gift and won't be used) 4 of which are laptops so I would like to be able to use their internet connection. At the moment I am working so have plugged the ethernet cable into my work laptop. Rebooting the router meant that my work laptop now has internet. I have my ADSL Netgear router which is wireless. I tried plugging it in between the router and the PC but I didn't seem to be able to share the internet connection wirelessly. The original PC still had internet despite ony being connected to my router but my wireless laptop didn't have a connection. My old cable router had an internet ethernet port on the back that the modem plugged into. My ADSL router doesn't, it has a phone connection socket. Is there a way of doing what I want with the equipment I have? Thanks

    Read the article

  • Cannot access shares via \\servername but \\ip works

    - by Jeff
    To set up the scenario: One of our techs set one of the domain controllers to use Microsoft time. The time IS correct (including Time Zone) and DOES match the other domain controller's time; it was previously incorrect, however. Since the change, no users can connect via \\servername\share or \\servername.domainname.com but \\ip\share works fine. I cannot even access it from the other domain controller with which I know both have the same time. The servername DOES resolve to the correct IP address. Also, strangely enough, \\domainname.com works as well which resolves to the same server. Finally Everything that I have tried does resolve to the same, correct IP address. The error is: login failure: The target account name is incorrect. I believe it is time related but since the times are correct and match I'm not sure. Anyone know what might cause this?

    Read the article

  • Notification if SyncToy fails

    - by Joel Coehoorn
    I support a number of laptop users. In the past (before there were many laptops), each user's computer was set up so that their My Documents folder was mapped to a shared folder on the server. This worked very well for desktops, but has several obvious downsides for laptops (no files when you're off-site, etc). I'm exploring several alternatives for laptops to better map the shared drives, and SyncToy seems the best so far. I have a couple trial users set up so that it syncs automatically whenever they log in, along with a desktop icon they can click if they know they'll need something saved before the next login. My problem is that I'm concerned how I, as the maintainer of this system, can spot failures. I don't want my first indication of a problem to come after a user drops their laptop in a lake and it turns out nothing was synced for the last year. Any ideas?

    Read the article

  • Distributed Nagios Installation

    - by kruczkowski
    I'm looking for a plug-in or product that will act as a remote probe and perform tests then send back the results to the central Nagios server. Reason for this is that I'd like to monitor internal systems and servers at customers, but don't want to allow all the traffic passing the firewalls. Ideally I'd like a soft-probe that would be installed and then perform the tests and send back the results (via SSH) to the central Nagios installation. Does anyone know of a product or plug-in that would offer such service? If not Nagios, is there any other monitoring system that does such a thing (ideally open-source)?

    Read the article

  • Can't access shared folder of win8/win7 machine - Error code: 0x80004005. Unspecified Error

    - by ruslan
    It's ironic that I, software engineer with 12 years of experience, continue to have this problem from one version of Windows to another without being able to achive consistent result (sometimes it works). Here it goes again. I have a machine with Win8 Consumer Preview. It doesn't really matter that it's win8. I had same issue with win7 before. On given machine I created local admin user with same name and password I have on second PC (the machine I'm typing this from now). I have two questions to you guys. Why I'm not able to access C$ share of win8 machine from another Win7 machine? I get error that C$ doesn't exist even though it does. Why I'm not able to access share named "test" in Win8 for which Permission set to Full for Everyone. When I attempt to access it from Win7 machine I'm asked to enter username and password. After entering administrator credentials I get error "Windows cannot access \192.168.1.123\test. Error code: 0x80004005. Unspecified Error". Windows Firewall is disabled on Win8 machine for both Private and Public networks. Guest account is disabled. Built-in admin account is enabled. Machine is pingable from other machines.

    Read the article

  • Why does a Remote Desktop Redirected Printer Doc appear every time I connect to Windows Server 2003 SBS?

    - by Jim Dagg
    I've run into a weird, persistent issue regarding a remote desktop connection. Every time I successfully log into a server running Windows Server 2003 SBS, without taking any further action, after a few seconds a print job spontaneously appears on my machine, titled "Remote Desktop Redirected Printer Doc". The document is 4K, datatype RAW, processor "WinPrint". I've heard of people running into this issue before, but can't seem to hunt down a coherent solution. It's a minor annoyance, but I get annoyed when Windows complains about a print job that, as far as I know, came from nowhere. Any thoughts on why this would occur and how I could prevent it from happening?

    Read the article

  • port forwarding/network settings preventing from game hosting

    - by Xitcod13
    I asked where to post this question on stackoverflow meta and they directed me here. Im on wireless connection and I want to host games in StarCraft: Brood War and i've been looking everywhere on how to accomplish that. My internet is amazingly fast so its not an internet problem (and when i play other peoples games dont experience lag) I found out that i need to have a static IP but I have already checked that i do (i downloaded a program to make my id static and it already was; The program asked for which router I used So i think it checked the router settings already) I found out that i need to allow Sc access through the firewall which i already did (i have zone-alarm but I allowed it everything possible except receiving emails lol) I have recently noticed that few people actually can join my games but most of them cannot. I dont know whats going on here. I really want to be able to host games overall how do I go about checking what is wrong with the network. Update: Alright I figured out what i did wrong in the first part I did not actually set up forwarding on the router -.- I have tried to fix my mistake. I went to forwarding options in my router (as this guide for my specific router suggests) but when i click ok I get a message incorrect ip address. 192.168.1.1 is my routers address. The default address that appears there is 192.168.1 (blank) I have set it to my computers current Ip4 adress which 192.168.1.23 I hope this works If so i will post it as an answer and mark it.

    Read the article

  • Very Slow DSL (ethernet) speed [New Interesting Update]

    - by Abhijit
    Very IMPORTANT and INTERESTING UPDATE: Due to some reason I just thought to do a complete new setup and this time I decided to again have openSUSE plus ubuntu. So I first reinstall lubuntu and then I installed OpenSUSE 12.2 (64 bit). Now, my DSL speed is working very normal and fine on opensuse. So this is very scary. Is it possible for any operating system to manipulate my NIC so that it will work fine only on that operating system and not on another os? Regarding positive thinking and not being paranoid, what is it that makes ONLY suse to get my NIC to work at normal speed but ubuntu can not do it? Not even fedora? Not even linux mint? What all these OS are lacking that enables suse to work great? == ORIGINAL QUESTION == I 'was' on opensuse 12.2 when my dsl speed was normal. Yesterday I switched from opensuse to ubuntu 12.04 and speed decreased. It came to range of 7-10-13-20-25-kbps. Then I switch to linux mint, and then to fedora. Still slow speed. When I was in ubuntu I disabled ipv6 but still no luck. Now I am in fedora but this time with DIFFERENT ISP. And still I am getting very slow sped. So my guess is this is nothing to do with os. What can be wrong? Is this problem of NIC? Does NIC speed decreases over time? Does NIC life ends over time as with keyboard or mouse? Help please All the os I used are 64 bit and my laptop is Compaq Presario A965Tu Intel Centrino DUal Core. Interesting thing to notice is I get normal speed while downloading torrent inside torrent client softwares. This slow speed issue applied to download from any web browser or installing software using terminal.

    Read the article

< Previous Page | 128 129 130 131 132 133 134 135 136 137 138 139  | Next Page >